KVT Description Type Order Grommets Thread PU KVT is a circular split frame for quick and easy installation and sealing of cables with connectors or complete cable harnesses. 3 KVT 20** 34 24 M20. Polyamide locknuts as well as a sealing ring are included in the shipment. M20x, For routing D-Sub, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required. 3 KVT 2*** 3 2 M2. Locknuts M2x, Locknuts with special cut-outs are available separately. The cut-out dimensions are listed on pages 62-63. KVT 32 36 26 M32. 3 M32x, KVT 32 + KGM-SUB-D9 37 27 M32. KGM-SUB-D9 fits D-Sub 9 connectors (Required wall cut-out: 36 mm, PU: ) Order No. 4 Order No. 46 KGM-PB fits DVI and PROFIBUS connectors (Required wall cut-out: 42 mm, PU: ) Order No. 47 Order No. 49 KVT 4203 28 M. KGM-SUB-D2 fits SUB-D2 connectors (Required wall cut-out: 0 mm, PU:) Order No. 48 Order No. 4 KVT + KGM-PB 420 29 M. * Only valid for grey product types ** Max. cable diameter of mm *** Max. cable diameter of mm 38
KVT. Type Order Grommets Thread PU Description KVT 0 2 KVT 0 2 + KGM-SUB-D2 4204 4206 3 2-2 - M0. M0. Retrofits, repairs and maintenance can be done much more easily and quickly High cable density, wide variety of grommets Suitable for metric cut-outs Locknut is included KVT 63 42 42 - M63. 70,0 2 3 KVT 63 4 4 4 4 - M63. M63x, NEMA type rating grey (similar RAL 703) IP4, with gasket and correct (certified acc. to EN 6029) NEMA type 2 (acc. to UL 0E) - C to + 0 C (static) Metric sizes Locknuts 2 * Only valid for grey product types www.icotek.com 39
KVT 80 Page 76 Description Type Order No. Grommets KT PU small large 0 The KVT 80 split cable glands are designed for routing and sealing cables with connectors. KVT 80 3 4236 4239 2 By assembling the two frame halves with the screws provided, the grommets provide sufficient pressure on the routed cables to obtain a high degree of strain relief. The KVT 80 can be fitted to a wall thickness from. mm to mm. A flat rubber gasket is included in the shipment. 78,2 Retrofits, repairs and maintenance can be done much more easily and quickly High cable density, wide variety of grommets Fast and easy mounting from the front side Strain relief according to EN 62444 0 78,2 KVT 80 6 4237 4238 6 - Note When mounting the KVT 80 on sheet metal, we recommend the following torque values:. mm sheet = Nm 2 - mm sheet =. Nm NEMA type rating grey (similar RAL 703) IP4, with gasket and correct (certified acc. to EN 6029) NEMA type 2 (acc. to UL 0E) - C to + 0 C (static) 80 mm in diameter *Only valid for grey product types
KVT-SNAP Pluggable split cable glands Type Order Grommets Thread PU Description KVT-SNAP 32 4 M32. KVT is a circular split frame for quick and easy installation of cables with connectors or complete cable harnesses. By using the model KVT-SNAP, cables can be routed through thick walls (> mm) e.g. into cast terminal boxes without the use of tools. A sealing ring is included in the shipment. KVT-SNAP 434 M. Assembly KVT-SNAP 63 4 42 4 - M63. The snap ring is screwed into metric thread or tapped into the cut-out (it can also be fastened with a locknut) Once the snap ring is affixed to the housing the equipped KVT is simply pushed into it. Fast and easy installation! KVT-SNAP 63 44 - KGM 32 227 228 M63. PA M32. grey (similar RAL 703) IP4, with gasket and correct (certified acc. to EN 6029) - C to + 0 C (static) Metric cut-outs KGM 2276 2286 PA M. SW0 Mx, KGM 63 2278 2288 PA M63. KGM Locknuts 2 www.icotek.com 4
KVT-W90 Description Type Order No. Grommets Thread PU with locknut small large Thread length The split KVT-W90 cable glands are used to insert and seal pre-terminated cables and conduits at a 90 0 angle. KVT 32-W90 44 46 M32.. mm In particular, the KVT 0-W90 is perfectly suited to hold corrugated or smooth hoses. A large number of cable entry grommets is available to the user. Polyamide standard locknuts as well as a sealing ring are included in the shipment. Split locknuts can be ordered separately. GMT 32 320 - M32. Installation at an angle of 90 0 to the cabinet and conduits Suitable for metric cut-outs 4,0 46,0 62 M0x, KVT 0 4-W90 4424 4426 4 - M0.. mm grey (similar RAL 703) IP4, with gasket and correct (certified acc. to EN 6029) - C to + 0 C (static) Metric cut-outs 4, 46, 62 M0x, 73 42 KVT 0 -W90 444 446 - M0.. mm 6 KGM Locknuts 2 GMT 0 3 - M0. *Only valid for grey product types 42