ED5229GT-E model ED5229GTRE model ED5229GT-E/GTRE Series GPON EDFA with WDM for IP (OLT) wavelengths Multi Optical Outputs (With Pluggable Cooling fans, fan speed monitoring & alarm / for Outdoor Cabinet Environment) 1310nm Forward Optical Transmitter The ED5229GT-E / GTRE series is a high-power multi-ports EDFA optical booster with gain spectrum bandwidth from 1545 to 1563 nm for HFC network. It is designed for the amplification of 1550nm single channel or multi-channel wavelengths (ITU wavelength) with WDM for IP(OLT) signal overlay. The integrated WDM devices are used for combing GPON(IP) signal wavelengths of 1310nm (upstream) & 1490nm (downstream) with 1550nm broadcasting signal in the same fiber. The ED5229GTRE model has an additional built-in optical receiver for directly monitoring the 1550nm signal. The units are specially designed with ruggedized components for operation from -5 C to +65 C which is suitable for both indoor and outdoor cabinet environments. The ED5229GT-E/GTRE has a very compact by design that includes pluggable cooling fan modules on the sides with fan speed monitoring and fan failure alarms. The pluggable power supply modules have on/off switches on the front panel. All optical connectors are positioned at a 60 degree angle to the front panel surface for easy fiber routing. It provides full front-panel access functions including the power supply connections. It is 2 RU in height and by using mounting adaptor brackets it will work on either a 21 and 23 rack and can be installed vertically or horizontally. This series of EDFA offers a flexible solution for broadcasting large area coverage of metropolitan and medium-size cities. The ED5229GT-E/GTRE EDFA adopts the world s top class pump lasers and the American brand OFS erbium-doped optical fiber. Perfect APC control, excellent design in the ventilation and efficient heat-dissipation ensure the long life and high reliability of the product. The pump laser will switch off automatically if the input optical signal power is too low or missing, which offers safety protection for the lasers. The LCD display and LED indicators on the front panel provide system information, real-time monitoring and alarm functions for operating this equipment. A RS232 interface is available for controlling the unit from a remote PC by a GUI software. Network management via SNMP protocol is possible using the RJ-45 port on the front panel. Page 1 of 8
Features Operation temperature range: -5 C to +65 C (for outdoor cabinet environment) 1545~1563 nm operating wavelengths range 32 combined output ports and 32 OLT input ports All front panel access Pluggable cooling fans on the side walls Fan speed monitoring and failure alarm All of the optical connectors are positioned at a 60 angle for easier fiber cable routing Fits into a 19 21 or 23 wide rack and can be mounted horizontally or vertically. Low noise, high reliability Precision APC control Powerful RS232 supervisory instruction Efficient space, flexible installation and easy operation A high performance optical output driver circuit and laser TEC to provide a highly reliable EDFA A Built-in microprocessor allows the unit to monitor the system parameters A pump laser auto shutdown function is available LED indicator on the front panel shows the alarm status LCD display on the front panel shows the system parameters Support firmware upgrade download Support SNMP for network management 1550nm test port (for ED5229GTRE model only) Block Diagram Page 2 of 8
Specifications ACI Communications, Inc. ED5229GT-E/GTRE Series EDFA with WDM (Multi optical outputs) No. PARAMETERS CONDITIONS UNITS SPECIFICATION NOTES 0. Environmental condition Min. typical Max. 0.1 Power Consumption Watt 70 0.2 Operation Case Temperature C -5 +65 0.3 Operation Humidity %RH 0 95 Without Condensation 0.4 Storage Case Temperature C -40 80 0.5 Storage Humidity %RH 0 95 Without Condensation 1. Optical Specifications Min. Typ. Max. 1.1 Optical Wavelength (GPON / IP) In vacuum nm 1270 1310 1350 Pass through 1480 1490 1505 Pass through 1.2 Optical Wavelength (broadcasting In vacuum nm 1545 1550 1563 1.3 Total Input Power Range @ λop=1550 nm dbm -10 +10 1.4 Saturated Output Power (per port) @ Pin -6 dbm @ λop=1550 nm 1.5 Output Power After WDM dbm 19 dbm Pout Pout +0.5 Pout +1 1.6 Output Power Stability Over λop db -0.5 0.5 1.7 Output Power Uniformity 1.8 Noise Figure @ Pin=0 dbm (1550 nm) Among output ports db ± 0.5 db db - 5.5 6.0 1.9 PDG (Polarization Dependent Gain) Over λop db - - 0.4 1.10 PMD (Polarization Mode Dispersion) Over λop Ps/nm - 0.5 1.11 Optical Return Loss All ports, min. db 50 1.12 Input Isolation db 25 1.13 Output Isolation db 40 1.14 Insertion loss (IP Wavelength) 1.15 Pump Laser Used @ 1310 nm & 1490 nm @ 22 dbm @ 23 dbm db 1.0 1.16 Residual Pump LD Power 970 ~ 980 nm dbm -30 1.17 Control Mode APC APC 1.18 Number of Output Ports 155nm+IP 32 1.19 Number of Input Ports 2. Mechanical / Power / Interface Specifications 2.1 Dimension (W x L x H) 2.2 Power Supply 155nm input 2 IP(OLT) inputs 32 19, 21 or 23, 2RU Rack mount Dual power module / hot standby Volt 2 3 486 x 229 x 88 mm (for 19 rack) 535 x 229 x 88 mm (for 21 rack) 584 x 229 x 88 mm (for 23 rack) -48 VDC (-30 ~ -72 VDC) 2.3 Pump Laser Switch Key Switch Pout is selected by customer, eg. Pout= 19 dbm For Pout= 19 dbm model Including optical switch & WDM insertion loss Page 3 of 8
Specifications ACI Communications, Inc. ED5229GT-E/GTRE Series EDFA with WDM (Multi optical outputs) No. PARAMETERS CONDITIONS UNITS SPECIFICATION NOTES 2. Mechanical / Power / Interface Specifications (Continued) 2.4 LED Indicators Power, Input, Pump, Alarm 2.5 User Interface RS232, RJ45 (Ethernet) 2.6 Fiber type Single Mode m 9/125 2.7 Optical Connector Output ports IP input ports 1550nm input ports 2.8 Optical Connector Orientation All ports LC/APC LC/UPC SC/APC 60 degree angled to the surface of the Front Panel 3. Built-in WDM Specifications Min. Typ. Max. 3.1 3.2 Transmission band Reflection band Insertion loss: Transmission band Reflection band For GPON signal nm With built-in WDM & switch 1550, 1490 downstream 1310 upstream db 0.8 0.6 3.3 PDL db 0.1 3.4 PMD ps 0.1 3.5 Isolation db 40 3.6 PON signal pass-through when EDFA is turned off 3.7 Maximum power 4. Built-in Optical Switch 4.1 Number of inputs WDM Max. power endurance Main (A), secondary (B) nm 1490, 1310 dbm 26 4.2 Insertion loss db 1.0 4.3 Switching time second 0.5 4.4 Switching mode: Switching to secondary input when main input is below predefined level Automatic switches back to main input when main input is turned on again When both main and secondary inputs are below the threshold, the EDFA selects the highest input source Signal passes through when equipment is down 5. Configuration and Management 5.1 Constant Output @ variable input: -6 ~ +8 dbm 5.2 Configuration method Through button panel and web interface 5.3 Management method 5.4 Managed Information By Web interface with 10/100 Mbps Ethernet port and SNMP Settable threshold of switching MIB file document available for third party integration Input power, output power, power supply status, bias current of pump laser, laser temperature Alarm threshold setting for: input power, output power, bias current of laser, laser temperature Alarm on failure of cooling fans 2 Page 4 of 8
Specifications ACI Communications, Inc. 6. Key parts information ED5229GT-E/GTRE Series EDFA with WDM (Multi optical outputs) 6.1 Pump laser brand & origin JDSU or Oclaro (Bookham), IPG or similar / USA and Russia 6.2 EDFA manufacturer origin Taiwan 6.3 Laser cooling method Thermoelectric cooler (TEC) 6.4 EDFA lifetime 10 years 7. Built-in Optical receiver (for ED5229GTRE model only) 7.1 Built-in optical receiver (for 1550nm test port) @ output of EDFA for broadcast signal testing 7.2 Optical receiver input -6 to 0 dbm (typical) 7.3 Video output level 70 dbμv min., manual adjustable 7.4 Video performance 47dB min. 7.5 Test point F5 3/8-inch female Page 5 of 8
50 88 Dimensions A. Front panel dimension for 19 Rack Mount B. Front panel dimension for 21 515 12 535 C. Front panel dimension for 23 Page 6 of 8
D. Length (Depth) dimension of Chassis: 229 mm Optical Connectors Orientation: 60 degree to the front panel surface E. Mechanical Chassis Page 7 of 8
Ordering Matrix ACI ED5229GT-E/GTRE Series EDFA with WDM Configuration Sheet Customer: Created By: Order Date: ORDERING MATRIX 2017/9/30 Position 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NUMBER E D 5 2 2 9 G T E 9 TEST PORT " " = No RF test port R = with 1550nm video test port 10 FAN Options A = Fixed Fans on back panel, without fan alarm (19" Chassis only) E = With Angled optical connecctors, LCD on left side, airflow from right to left, Plugable Fan modules on both sides, with fan speed monitoring & fan current data & fan failure alarm (19" Chassis & 21" L adaptor) &Advanced software 11 CONTROL INTERFACE 18 MAIN POWER 0: None (Default) 1: 110/220 VAC (Default) 1: SNMP (RJ45) 2: Dual 110/220 VAC 2: RS232 3: Dual -48 VDC 4: Dual -48 VDC, for Front Panel acces 12,13 NUMBER OF OUTPUT PORTS 32: 32 output ports 19 POWER CORD SETS 0 = None 1 = North America 2 = International / Europe 3 = Japan 15,16 OUTPUT POWER (per port) 4 = Australia 13: 13 dbm Selectable range: 5 = Argentina 14: 14 dbm 32port: 13 ~ 22 dbm 6 = DC Wire Set(AWG14) with Lugs type terminal, 15: 15 dbm Black Negative( - ), Red Positive( + ) 16: 16 dbm 7 = DC power connector (DB2 type) with wire terminal 17: 17 dbm Black Negative( - ), Red Positive( + ) 18: 18 dbm 8 = DC power connector (DB2 type) with wire terminal 19: 19 dbm Red Negative( - ), Black Positive( + ) 20: 20 dbm 9 = DC Wire Set(AWG14) with Lugs type terminal, 21: 21 dbm Red Negative( - ), Black Positive( + ) 22: 22 dbm X = Custom - (Determined by product management) 17 OPTICAL CONNECTOR(input - output) 20 PON IP INPUT CONNECTOR 1: SC/APC - LC/APC 0= No IP input 1= LC/UPC 2= LC/APC 3= SC/UPC 4= SC/APC NOTES: Notes: 1. The GT version represents an EDFA with extended opeation temperature range of -5 to 65 for outdoor cabinet environment. 2. The GT-E version has all optical connectors positioned at a 60 degree angle to the front panel surface. And airflow direction is changed to be from right to left. ACI Communications, Inc. 23307 66th Avenue South Kent, WA 98032 Rev N 10-03-2017 Printed in U.S.A. ACI Communications, Inc. reserves the right to discontinue the manufacture or change specifications without prior notice on any parts illustrated in this data sheet. Registered trademarks are the property of their respective owner Page 8 of 8