KnollStudio GSA Addendum 7/15/16

KnollStudio GSA Addendum 7/15/16 General Services Administration Federal Acquisition Service Federal Supply Schedule Catalog FSC Group 71, Furniture Contract Number: GS-03F-078DA Contract Period: March 23, 2016 through March 22, 2021 Contractor: Knoll, Inc. P.O. Box 157 1235 Water Street East Greenville, PA 18041 (215) 679-7991 Business Size: Large

Information for Ordering KnollStudio GS-03F-078DA KnollStudio GSA 1. Special Item Numbers: a. 711-11 Tables and Accessories 711-16 Upholstered Furniture 711-18 Multi-Purpose Seating 711-19 Stacking Chairs and Dollies b. N/A c. 711-93 Reconfiguration Services: To be negotiated on a project-by-project basis. Requires purchase of product. d. 711-94 Design/Layout Services: Rate is $65.49 per hour e. 711-95 Installation Services: Rates $150,000.00 and Below: Non Union: $51.50-$94.28 per hour Rates $150,000.01 and Greater: To be negotiated on a project by project basis. f. 711-91 Project Management: Union: $128.97 per hour Non-Union: $63.48 per hour 2. Maximum Order: $200,000 (Net) per Purchase Order - SIN711-18, SIN711-19 $300,000 (Net) per Purchase Order - SIN711-16 $500,000 (Net) per Purchase Order - SIN711-11 3. Minimum Order: $50.00 per delivery point (net). 4. Geographical Coverage (delivery area): The 48 contiguous United States and the District of Columbia. Deliveries to destinations outside the 48 contiguous states are made F.O.B. inland carrier, point of exportation, with transportation to be paid by the government from point of exportation to the destination outside the 48 contiguous states. 5. Points of Production: East Greenville, PA 6. Discounts: List prices (non-discount deducted) are shown in this Price List. 90 Day Delivery Program All Studio products except Propeller, Ricchio, Florence Knoll, Brno, Saarinen,Pixel Discount Single Order from List Value List Price $ 0.00-$540,540 62.26% Propeller Discount Single Order from List Value List Price $ 0.00-$1,428,571 64.3% Ricchio Discount Single Order from List Value List Price $ 0.00-$588,235 65.32% Florence Knoll, Brno, Saarinen Discount Single Order from List Value List Price $ 0.00-$547,945 62.77% 7. N/A 8. Payment Terms: Net 30 days. 9. Government Credit Card: Accepted below and above the micro purchase threshold 10. Foreign Items: None. 11a. Time of Delivery: 90 days, ARO. 11b, c, & d. Expedited/Overnight Delivery: Contact your Knoll GSA Customer Service Representative 12. F.O.B. Point: Destination within 48 contiguous United States and the District of Columbia. 13. Ordering Address: Knoll, Inc. c/o Knoll Participating Dealer P.O. Box 157 1235 Water Street East Greenville, PA 18041 Attn: Order Entry 13b. Ordering Procedures: For supplies and services, ordering procedures and information on BPA s are found in FAR 8.404. 14. Payment Address: Knoll, Inc. P.O. Box 841366 Dallas, TX 75284-1366 15. Warranty: See page 4. 16. Export Packing Charges: Write for a quotation. 17. See #9 18. N/A 19. Installation: To be negotiated on a project-by-project basis. 20. N/A 21. N/A 22. Participating Dealers: Knoll dealers may not accept equipment orders or perform invoicing under this contract. However, authorized Knoll Dealers do provide design and installation services as Knoll s subcontractor. Contact your local Knoll Sales Representative for a current listing of authorized dealers in your area. 23. N/A 24. N/A 25 & 26. Federal Identification Numbers: CCR: 1996J212868 Tax ID No. (TIN): 13-3873847 Cage Code: 13207 DUNS No.: 78-131-6096 CEC: 0877161G NAICS No.: 337214 27. Restocking Terms: 25% of net product cost. Prior authorization is required. 28. Cancellation Terms: Prior to production, no cancellation charge will apply. 1

Sample Order Form KnollStudio GSA 1 Order Date 2 Contract number 3 Order number 4 Issuing office: Requestor name and telephone number 5 Shipping address: Contact name and telephone number 6 Contractor: Knoll, Inc. c/o Knoll Participating Dealer P.O. Box 157 1235 Water Street East Greenville, PA 18041 Attn.: Order Entry 7 Remit to: Knoll, Inc. P.O. Box 841366 Dallas, TX 75284-1366 10 Terms: Net 30 Days 11 Complete product description, including model number, and finish(es) 12 Quantity ordered 13 Individual unit price 14 Amount (quantity x unit price) 15 Partial shipment and partial payment authorized 16 Total cost 17 Invoice address 18 Authorized contracting officer signature and telephone number 19 Authorized contracting officer name and title (typed) 8 FOB destination 9 ARO date (After Receipt of Order) 2

SAMPLE ORDER FORM KnollStudio GSA ORDER FOR SUPPLIES OR SERVICES PAGE OF PAGES IMPORTANT: Mark all packages and papers with contact and/or order numbers. DATE OF ORDER CONTRACT NO. (if any) ORDER NO. REQUISITION/REFERENCE NO. 1 01-1-16 2 GS-28F-8029H 3 12345 ISSUING OFFICE (Address correspondence to) 4 Federal Agency Name 1 Town Street City, State, Zip Name and Telephone Number TO: CONTRACTOR (Names, address and ZIP Code) 6 Knoll, Inc. c/o Knoll Participating Dealer P.O. Box 157 1235 Water Street East Greenville, PA 18041 Attn.: Order Entry SHIP TO: (Consignee and address, ZIP Code) 5 Federal Agency Name 2 Town Street City, State, Zip Name and Telephone Number TYPE OF ORDER A. PURCHASE - Reference your Please furnish the following on the terms and conditions specified on both sides of this order and on the attached sheets, if any, including delivery as indicated. This purchase is negotiated under authority of: REMIT TO: 7 Knoll, Inc. P.O. Box 841366 Dallas, TX 75284-1366 B. DELIVERY - Except for billing instructions on the reverse, this delivery order is subject to instructions contained on this side only of this form and is issued subject to the terms and conditions of the above-numbered contract. REQUISITIONING OFFICE ACCOUNTING AND APPROPRIATION DATA BUSINESS CLASSIFICATION (Check appropriate boxes) SMALL OTHER THAN DISAD- WOMEN- SMALL VANTAGED OWNED F.O.B. POINT GOVERNMENT NO. DELIVER TO F.O.B. POINT ON OR BEFORE (Date) 8 Destination ITEM NO. (A) SUPPLIES OR SERVICES (B) 1 11 P2-R24-G-PA-6-Y-J 30 x60 Rectangle Black edgeband No grommet Medium metallic grey legs Glides (See reverse for Rejections) QUANTITY ORDERED (C) 12 1 X UNIT (D) DISCOUNT TERMS 9 ARO Date 10 Net 30 Days UNIT PRICE (E) 13 $573.20 AMOUNT (F) 14 $573.20 QUANTITY ACCEPTED (G) 15 Partial shipment and partial payment authorized SEE BILLING INSTRUCTIONS ON REVERSE SHIPPING POINT GROSS SHIPPING WEIGHT INVOICE NO. (H) TOT. (cont. pages) MAIL INVOICE TO: (Include ZIP Code) 17 Agency Name, 3 Town Street, City, State, Zip UNITED STATES OF AMERICA NAME (Typed) 16 $573.20 BY (Signature) 18 Contracting Officer signature and 19 John Smith, Contracting Officer telephone no. 3 (1) GRAND TOTAL

Warranty KnollStudio GSA Customer s Own Material Warranty Claims A Purchaser who requests a fabric or other surface material not standard to Seller s line of Products ( COM ) must submit samples of the requested material to Seller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements of Underwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of the procedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and... hold Seller harmless for any damages, injuries or losses arising out of or related to use of the COM on the Product. Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials, during the applicable warranty period set forth below. Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair). Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts. Product and Period of Warranty Lifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Equity, Morrison, Reff Profiles laminate, Series 2 Storage, Template and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 Veneer Front Storage, special or custom products, see below) 12 Years: Chadwick, Essentials Work Chairs, Generation by Knoll, Life, Moment, MultiGeneration by Knoll, ReGeneration by Knoll, RPM and Sapper seating (except seating upholstery, textiles, leathers and finishes, see below). 10 Years: Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Reff Profiles, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, Wood Casegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Interaction tables (except height adjustment mechanisms for Counterforce, crank-adjustable, and split-top tables and worksurfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor Arm Collection, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, see below), Smokador collection (except leathers, see below), and Orchestra Universal Systems Accessories. 5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneer products, Currents handcrank, Interaction Counterforce, Interaction crank-adjustable, and split-top mechanisms, KnollStudio, Spark Series seating structural elements, Richard Schultz outdoor products, KnollExtra CPU storage and all universal storage drawers. 3 Years: Seating upholstery, textiles, leathers and finishes. Fabric boards textiles and Smokador Collection leathers. 2 Years: All other KnollExtra product 1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces. KnollStudio Maya Lin and Spark Series seating finishes. This warranty does not apply to: Damage caused by a carrier other than the Seller. Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products). COM or other third party materials applied to Products. Products not installed by or under the auspices of a Knoll Dealer. Dramatic temperature variations or exposure to unusual conditions. Changes in surface finishes, including colorfastness due to aging or exposure to light. Except as specifically noted above, textiles and upholstery supplied by KnollTextiles (consult current KnollTextiles price list for applicable warranty). Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces. THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. The remedies provided above are the Purchaser s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of its Products. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, with... respect to or arising out of the Product furnished hereunder. All shipments for all Knoll Products within the contiguous United States and Canada are F.O.B. Destination. Risk of loss passes to Purchaser at time of delivery to carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to make a claim against carrier or notify Seller during the ten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. Seller will agree to repair or replace Product damaged in shipment if Purchaser has notified Seller of freight damage within ten (10) working days after receipt and assigns its rights against the carrier. 4

Table of Contents KnollStudio GSA Pixel Collection Marc Krusin : Pixel Table Series 6 Marc Krusin : Pixel Electrical 22 General Ordering Information 33 Copyright 2016 Knoll, Inc. All rights reserved. All prices effective 7/7/2016. 5 PLKSV20716

Alpha-Numeric Index KnollStudio GSA pattern no. page KBXB3030 20 KBXB36D 20 KBXC3030 20 KBXC36D 20 KBXL3030 20 KBXL36D 20 KBXW3030 20 KBXW36D 20 KCPA4818 10 KCPA4824 10 KCPA4830 10 KCPA6018 10 KCPA6024 10 KCPA6030 10 KCPA7218 10 KCPA7224 10 KCPA7230 10 KCPW4818 10 KCPW4824 10 KCPW4830 10 KCPW6018 10 KCPW6024 10 KCPW6030 10 KCPW7218 10 KCPW7224 10 KCPW7230 10 KCXA4818 8 KCXA4824 8 KCXA4830 8 KCXA6018 8 KCXA6024 8 KCXA6030 8 KCXA7218 8 KCXA7224 8 KCXA7230 8 KCXE6030 8 KCXE7230 8 KCXW4818 8 KCXW4824 8 KCXW4830 8 KCXW6018 8 KCXW6024 8 KCXW6030 8 KCXW7218 8 KCXW7224 8 KCXW7230 8 KE1101C48 22 KE1101C72 22 KE1200C48 22 KE1200C72 22 KE2201C48 22 KE2201C72 22 KE2300C48 22 KE2300C72 22 KE3202C48 22 KE3202C72 22 KE3400C48 22 KE3400C72 22 KE4202C48 24 KE4202C72 24 KE4202H(L,R) 24 pattern no. page KE4202L48 24 KE4202L60 24 KE4301C48 24 KE4301C72 24 KE4301H(L,R) 24 KE4301L48 24 KE4301L60 24 KE4400C48 24 KE4400C72 24 KE5202C48 24 KE5202C72 24 KE5202H(L,R) 24 KE5202L48 24 KE5202L60 24 KE5301C48 24 KE5301C72 24 KE5301H(L,R) 24 KE5301L48 24 KE5301L60 24 KE5400C48 24 KE5400C72 24 KE6301C48 26 KE6301C72 26 KE6301H 26 KE6301L48 26 KE6301L60 26 KE7202C72-BK 24 KE7301C72-BK 24 KE7400C72-BK 24 KE8201C48 24 KE8201C72 24 KE8201H(L,R) 24 KE8201L48 24 KE8201L60 24 KE8300C48 24 KE8300C72 24 KE8300H(L,R) 24 KE8300L48 24 KE8300L60 24 KERG 22 KFXW3636 16 KFXW4242 16 KFXW4818 16 KFXW4824 16 KFXW4830 16 KFXW4836 16 KFXW4848 16 KFXW6018 16 KFXW6024 16 KFXW6030 16 KFXW6036 16 KFXW7218 16 KFXW7224 16 KFXW7230 16 KFXW7236 16 KLJ12 28 KLJ24 28 KLJ36 28 KLJ48 28 KLJ60 28 KLSC120 28 pattern no. page KLSC72 28 KTD 30 KTK48 30 KTK60 30 KTK72 30 KTK84 30 KTK96 30 KTPA6030 14 KTPA6036 14 KTPA7230 14 KTPA7236 14 KTPW6030 14 KTPW6036 14 KTPW7230 14 KTPW7236 14 KTSH120 30 KTSH72 30 KTXA6030 12 KTXA6036 12 KTXA7230 12 KTXA7236 12 KTXE6036 12 KTXE7236 12 KTXW6030 12 KTXW6036 12 KTXW7230 12 KTXW7236 12 KYDW9648 18 KYPW7236 18 KYPW8436 18 KYXW7236 18 KYXW8436 18 KYXW9648 18 32

Marc Krusin Pixel Table Series Grommet and Electrical Module Cutout Matrix TROUGH OPTIONS TOP OPTIONS TYPE TABLE FRONT CENTER FRONT LEFT FRONT RIGHT FRONT LEFT CENTER AND RIGHT CENTER CENTER NO CUTOUTS ALL TABLES Y Y Y Y Y ROUND GROMMET KE1, KE2, KE3 KE4 KE5 FIXED T-LEG ERG DRGL DRGR DRG GRG FLIP T-LEG ERG DRGL DRGR DRG GRG FIXED C-LEG ERG DRGL DRGR DRG GRG FLIP C-LEG ERG DRGL DRGR DRG FIXED Y-LEG ERG DRGL DRGR DRG GRG FLIP Y-LEG ERG DRGL DRGR DRG Y FOLD GRG * 4-LEG RECTANGLE ERG DRGL DRGR DRG GRG 4-LEG SQUARE ERG GRG ELEC. HGT. ERG DRGL DRGR DRG C-LEG ELEC. HGT. T-LEG ERG DRGL DRGR DRG COLUMN LEG GRG FIXED T-LEG ENO DNOL DNOR DNO GNO FLIP T-LEG ENO DNOL DNOR DNO GNO FIXED C-LEG ENO DNOL DNOR DNO GNO FLIP C-LEG FIXED Y-LEG ENO DNOL DNOR DNO GNO * * FLIP Y-LEG ENO DNOL DNOR DNO GNO * * Y FOLD GNO * 4-LEG RECTANGLE ENO DNOL DNOR DNO GNO 4-LEG SQUARE ENO GNO ELEC. HGT. C-LEG ELEC. HGT. T-LEG ENO DNOL DNOR DNO COLUMN LEG GNO FIXED T-LEG EN DNL DNR DN GN FLIP T-LEG EN DNL DNR DN GN FIXED C-LEG EN DNL DNR DN GN FLIP C-LEG EN DNL DNR DN FIXED Y-LEG EN DNL DNR DN FLIP Y-LEG EN DNL DNR DN Y FOLD GN * 4-LEG RECTANGLE EN DNL DNR DN GN 4-LEG SQUARE EN GN ELEC. HGT. EN DNL DNR DN C-LEG ELEC. HGT. T-LEG EN DNL DNR DN COLUMN LEG GN FIXED T-LEG EA DAL DAR DA GA FLIP T-LEG EA DAL DAR DA GA FIXED C-LEG EA DAL DAR DA GA FLIP C-LEG EA DAL DAR DA FIXED Y-LEG EA DAL DAR DA FLIP Y-LEG EA DAL DAR DA Y FOLD GA * 4-LEG RECTANGLE EA DAL DAR DA GA 4-LEG SQUARE EA GA ELEC. HGT. EA DAL DAR DA C-LEG ELEC. HGT. T-LEG EA DAL DAR DA COLUMN LEG GA 6

KnollStudio GSA TOP OPTIONS TYPE TABLE FRONT CENTER FRONT LEFT FRONT RIGHT KE6 KE7 KE8 PATTERN CODE EXAMPLES FRONT LEFT AND RIGHT CENTER CENTER TROUGH OPTIONS CENTER FIXED T-LEG FLIP T-LEG FIXED C-LEG TAS FLIP C-LEG TAS FIXED Y-LEG FLIP Y-LEG Y FOLD 4-LEG RECTANGLE 4-LEG SQUARE ELEC. HGT. C-LEG ELEC. HGT. T-LEG COLUMN LEG FIXED T-LEG FLIP T-LEG FIXED C-LEG FLIP C-LEG FIXED Y-LEG FLIP Y-LEG Y FOLD 4-LEG RECTANGLE 4-LEG SQUARE ELEC. HGT. C-LEG ELEC. HGT. T-LEG NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES NO CUTOUT CODE REQUIRED - MODULE CLIPS ON TO EDGE OF TABLE. NOT AVAILABLE ON TABLES WITH KNIFE EDGES COLUMN LEG FIXED T-LEG ET DTL DTR DT GT FLIP T-LEG ET DTL DTR DT GT FIXED C-LEG ET DTL DTR DT GT FLIP C-LEG ET DTL DTR DT FIXED Y-LEG ET DTL DTR DT FLIP Y-LEG ET DTL DTR DT Y FOLD GT * 4-LEG RECTANGLE ET DTL DTR DT GT 4-LEG SQUARE ET GT ELEC. HGT. ET DTL DTR DT C-LEG ELEC. HGT. T-LEG ET DTL DTR DT COLUMN LEG GT Y - NO CUTOUTS ERG - ONE CUTOUT FRONT CENTER FOR ROUND GROMMET DN - TWO CUTOUTS FOR KE4 ELECTRICAL MODULES, (1) FRONT LEFT AND (1) FRONT RIGHT * A Y-FOLD TABLE CONSISTS OF TWO 48 X48 SQUARE SEGMENTS. ONE CUTOUT WILL BE PLACED IN BOTH SECTIONS FOR A TOTAL OF TWO CUTOUTS PER TABLE. * * THE KE2 POWER CENTER IS THE ONLY POWER CENTER OFFERED IN THE CENTER / CENTER LOCATION ON THE FIXED AND FLIP Y-LEG TABLES. NOT AVAILABLE 7

Marc Krusin Pixel Table Series C-Leg Tables, Fixed Top description w d h leg type table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KCXW Work Height, Fixed Top 48 18 28 3 /4 C-Leg 52 60 18 28 3 /4 C-Leg 61 72 18 28 3 /4 C-Leg 70 48 24 28 3 /4 C-Leg 63 60 24 28 3 /4 C-Leg 74 72 24 28 3 /4 C-Leg 85 48 30 28 3 /4 C-Leg 74 60 30 28 3 /4 C-Leg 87 72 30 28 3 /4 C-Leg 101 KCXA Pin Set Height Adjustable, Fixed Top 48 18 28 3/4-34 C-Leg 55 60 18 28 3/4-34 C-Leg 64 72 18 28 3/4-34 C-Leg 73 48 24 28 3/4-34 C-Leg 66 60 24 28 3/4-34 C-Leg 77 72 24 28 3/4-34 C-Leg 89 48 30 28 3/4-34 C-Leg 77 60 30 28 3/4-34 C-Leg 91 72 30 28 3/4-34 C-Leg 104 KCXE Electric Height Adjustable, Fixed top, Glides 60 30 28 3/4-51 3 /5 C-Leg 120 72 30 28 3/4-51 3 /5 C-Leg 132 Order Code Example: KCXW7230-G-111-300-Y- 111T KCXW7230 72 x30 rectangle, C-Leg, Fixed, Work Height G Glides 111 Black laminate 300 Black molded edgeband Y No grommet 111T Jet Black legs Finishes Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Specify: 1. Pattern number 2. Locking casters or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Glides (suffix G) Casters (suffix C) Note: Electric height tables (KCXE) are only available in Jet Black or Bright White legs with glides. *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 8

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KCXW4818-( )-( )-( )-( )-( ) $1,624. $1,737. $2,858. KCXW6018-( )-( )-( )-( )-( ) 1,694. 1,820. 2,981. KCXW7218-( )-( )-( )-( )-( ) 1,755. 1,892. 3,126. KCXW4824-( )-( )-( )-( )-( ) 1,682. 1,804. 2,996. KCXW6024-( )-( )-( )-( )-( ) 1,756. 1,893. 3,175. KCXW7224-( )-( )-( )-( )-( ) 1,821. 1,976. 3,355. KCXW4830-( )-( )-( )-( )-( ) 1,762. 1,896. 3,185. KCXW6030-( )-( )-( )-( )-( ) 1,845. 1,995. 3,396. KCXW7230-( )-( )-( )-( )-( ) 1,918. 2,086. 3,552. KCXA4818-( )-( )-( )-( )-( ) 1,815. 1,925. 3,026. KCXA6018-( )-( )-( )-( )-( ) 1,882. 2,010. 3,152. KCXA7218-( )-( )-( )-( )-( ) 1,944. 2,088. 3,297. KCXA4824-( )-( )-( )-( )-( ) 1,870. 1,992. 3,167. KCXA6024-( )-( )-( )-( )-( ) 1,945. 2,084. 3,343. KCXA7224-( )-( )-( )-( )-( ) 2,011. 2,167. 3,520. KCXA4830-( )-( )-( )-( )-( ) 1,951. 2,084. 3,356. KCXA6030-( )-( )-( )-( )-( ) 2,034. 2,185. 3,564. KCXA7230-( )-( )-( )-( )-( ) 2,107. 2,277. 3,719. KCXE6030-(G)-( )-( )-( )-(111T, 118T) 3,762. 3,928. 5,147. KCXE7230-(G)-( )-( )-( )-(111T, 118T) 3,850. 4,034. 5,322. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 6 for the proper cutout code. Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are constructed using a combination of cast and extruded aluminum. Base and upper mounting plates are cast aluminum and bolted to an extruded aluminum vertical stem. Finished in a highly durable textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Trough cutout on C-Leg Only TAS - Center Cutout C-Leg tables may be specified with a center trough cutout but only if no box cutouts are specified on the top. Maintenance: See pages 26. Note: Pixel tables are Greenguard certified. 9

Marc Krusin Pixel Table Series C-Leg Tables, Flip Top description w d h leg type table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KCPW Work Height, Flip Top, Casters 60 18 28 3 /4 C-Leg 66 48 18 28 3 /4 C-Leg 74 72 18 28 3 /4 C-Leg 75 48 24 28 3 /4 C-Leg 74 60 24 28 3 /4 C-Leg 78 72 24 28 3 /4 C-Leg 91 48 30 28 3 /4 C-Leg 74 60 30 28 3 /4 C-Leg 93 72 30 28 3 /4 C-Leg 106 KCPA Pin Set Height Adjustable, Flip Top, Casters 48 18 28 3/4-34 C-Leg 60 60 18 28 3/4-34 C-Leg 69 72 18 28 3/4-34 C-Leg 78 48 24 28 3/4-34 C-Leg 71 60 24 28 3/4-34 C-Leg 82 72 24 28 3/4-34 C-Leg 94 48 30 28 3/4-34 C-Leg 82 60 30 28 3/4-34 C-Leg 96 72 30 28 3/4-34 C-Leg 109 Order Code Example: KCPW7224-C-114-004T- Y-115T KCPW7224 72 x24 Work Height, Flip Top C Locking casters 114 Folkstone laminate 004T Folkstone flat edgeband Y No grommet 115T Medium Grey legs Finishes Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Specify: 1. Pattern number 2. Locking casters or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Casters (suffix C) Note: Glides are not available on flip top tables. *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 10

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KCPW6018-(C)-( )-( )-( )-( ) $1,863. $1,992. $3,218. KCPW4818-(C)-( )-( )-( )-( ) 1,790. 1,903. 3,089. KCPW7218-(C)-( )-( )-( )-( ) 1,927. 2,072. 3,365. KCPW4824-(C)-( )-( )-( )-( ) 1,848. 1,971. 3,230. KCPW6024-(C)-( )-( )-( )-( ) 1,927. 2,067. 3,413. KCPW7224-(C)-( )-( )-( )-( ) 1,995. 2,152. 3,590. KCPW4830-(C)-( )-( )-( )-( ) 1,931. 2,065. 3,421. KCPW6030-(C)-( )-( )-( )-( ) 2,016. 2,169. 3,635. KCPW7230-(C)-( )-( )-( )-( ) 2,093. 2,264. 3,790. KCPA4818-(C)-( )-( )-( )-( ) 1,924. 2,038. 3,206. KCPA6018-(C)-( )-( )-( )-( ) 1,997. 2,127. 3,335. KCPA7218-(C)-( )-( )-( )-( ) 2,061. 2,206. 3,482. KCPA4824-(C)-( )-( )-( )-( ) 1,983. 2,106. 3,348. KCPA6024-(C)-( )-( )-( )-( ) 2,061. 2,201. 3,530. KCPA7224-(C)-( )-( )-( )-( ) 2,130. 2,287. 3,708. KCPA4830-(C)-( )-( )-( )-( ) 2,065. 2,200. 3,538. KCPA6030-(C)-( )-( )-( )-( ) 2,151. 2,304. 3,752. KCPA7230-(C)-( )-( )-( )-( ) 2,228. 2,399. 3,910. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 6 for the proper cutout code. Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are constructed using a combination of cast and extruded aluminum. Base and upper mounting plates are cast aluminum and bolted to an extruded aluminum vertical stem. Finished in a highly durable textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Trough cutout on C-Leg Only TAS - Center Cutout C-Leg tables may be specified with a center trough cutout but only if no box cutouts are specified on the top. Maintenance: See pages 26. Note: Pixel tables are Greenguard certified. 11

Marc Krusin Pixel Table Series T-Leg Tables, Fixed Top description w d h leg type table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KTXW Work Height, Fixed Top 60 30 28 3 /4 T-Leg 84 72 30 28 3 /4 T-Leg 98 60 36 28 3 /4 T-Leg 98 72 36 28 3 /4 T-Leg 114 KTXA Pin Set Height Adjustable, Fixed Top 60 30 28 3/4-34 T-Leg 88 72 30 28 3/4-34 T-Leg 102 60 36 28 3/4-34 T-Leg 101 72 36 28 3/4-34 T-Leg 117 KTXE Electric Height Adjustable, Fixed top, Glides 60 36 28 3/4-51 3 /5 T-Leg 132 72 36 28 3/4-51 3 /5 T-Leg 146 Order Code Example: KTXA6030-C-118-300-Y- 111T KTXA6030 60 x30 Pin Set Height Adjustable, Fixed Top C Locking casters 111 Bright White laminate 118T Bright White flat edge Y No grommet 118T Bright White legs Finishes Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Specify: 1. Pattern number 2. Locking casters or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Glides (suffix G) Casters (suffix C) Note: Electric height tables (KTXE) are only available in Jet Black or Bright White legs with glides. *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 12

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KTXW6030-( )-( )-( )-( )-( ) $1,740. $1,895. $3,295. KTXW7230-( )-( )-( )-( )-( ) 1,824. 1,999. 3,886. KTXW6036-( )-( )-( )-( )-( ) 1,782. 1,949. 3,440. KTXW7236-( )-( )-( )-( )-( ) 1,918. 2,106. 3,882. KTXA6030-( )-( )-( )-( )-( ) 1,866. 2,021. 3,486. KTXA7230-( )-( )-( )-( )-( ) 2,038. 2,211. 3,662. KTXA6036-( )-( )-( )-( )-( ) 2,041. 2,208. 3,672. KTXA7236-( )-( )-( )-( )-( ) 2,177. 2,365. 4,111. KTXE6036-(G)-( )-( )-( )-(111T, 118T) 3,813. 3,992. 5,294. KTXE7236-(G)-( )-( )-( )-(111T, 118T) 3,905. 4,105. 5,698. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 6 for the proper cutout code. Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are constructed using a combination of cast and extruded aluminum. Base and upper mounting plates are cast aluminum and bolted to an extruded aluminum vertical stem. Finished in a highly durable textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Maintenance: See pages 26. Note: Pixel tables are Greenguard certified. 13

Marc Krusin Pixel Table Series T-Leg Tables, Flip Top description w d h leg type table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KTPW Work Height, Flip Top, Casters 60 30 28 3 /4 T-Leg 93 72 30 28 3 /4 T-Leg 107 60 36 28 3 /4 T-Leg 106 72 36 28 3 /4 T-Leg 122 KTPA Pin Set Height Adjustable, Flip top, Casters 60 30 28 3/4-34 T-Leg 96 72 30 28 3/4-34 T-Leg 110 60 36 28 3/4-34 T-Leg 109 72 36 28 3/4-34 T-Leg 125 Order Code Example: KTPW6036-C-114-004T-Y- 115T KTPW6036 60 x36 rectangle, T-Leg, Flip, Work Height, Casters C Locking casters 114 Folkstone laminate 004T Folkstone flat edgeband Y No grommet 115T Medium Grey legs Finishes Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Specify: 1. Pattern number 2. Locking caster or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Casters (suffix C) Note: Glides are not available on flip top tables. *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 14

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KTPW6030-(C)-( )-( )-( )-( ) $2,330. $2,486. $3,909. KTPW7230-(C)-( )-( )-( )-( ) 2,423. 2,598. 4,093. KTPW6036-(C)-( )-( )-( )-( ) 2,422. 2,591. 4,096. KTPW7236-(C)-( )-( )-( )-( ) 2,564. 2,754. 4,543. KTPA6030-(C)-( )-( )-( )-( ) 2,518. 2,672. 4,080. KTPA7230-(C)-( )-( )-( )-( ) 2,609. 2,783. 4,263. KTPA6036-(C)-( )-( )-( )-( ) 2,605. 2,773. 4,280. KTPA7236-(C)-( )-( )-( )-( ) 2,749. 2,939. 4,715. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 6 for the proper cutout code. Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are constructed using a combination of cast and extruded aluminum. Base and upper mounting plates are cast aluminum and bolted to an extruded aluminum vertical stem. Finished in a highly durable textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Maintenance: See pages 26. Note: Pixel tables are Greenguard certified. 15

Marc Krusin Pixel Table Series Four Leg Tables, Fixed Top Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 description w d h top 99sort KFXW Work Height, Fixed Top 36 36 28 3 /4 square 57 42 42 28 3 /4 square 72 48 48 28 3 /4 square 89 48 18 28 3 /4 rectangle 43 60 18 28 3 /4 rectangle 56 72 18 28 3 /4 rectangle 65 48 24 28 3 /4 rectangle 53 60 24 28 3 /4 rectangle 62 72 24 28 3 /4 rectangle 79 48 30 28 3 /4 rectangle 62 60 30 28 3 /4 rectangle 73 72 30 28 3 /4 rectangle 85 48 36 28 3 /4 rectangle 71 60 36 28 3 /4 rectangle 85 72 36 28 3 /4 rectangle 99 table wgt. (lbs) Order Code Example: KFXW6030-G-141-118T-Y- 118T KFXW6030 60 x30 rectangle, 4-Leg, Fixed, Work Height G Glides 141 Whitened Ash laminate 118T Bright White flat edgeband Y No grommet 118T Bright White legs Finishes Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Specify: 1. Pattern number 2. Locking casters or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Glides (suffix G) Casters (suffix C) *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 16

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KFXW3636-( )-( )-( )-( )-( ) $1,213. $1,338. $2,532. KFXW4242-( )-( )-( )-( )-( ) 1,333. 1,479. 2,729. KFXW4848-( )-( )-( )-( )-( ) 1,341. 1,498. 3,207. KFXW4818-( )-( )-( )-( )-( ) 1,172. 1,299. 2,318. KFXW6018-( )-( )-( )-( )-( ) 1,265. 1,410. 2,462. KFXW7218-( )-( )-( )-( )-( ) 1,317. 1,478. 2,578. KFXW4824-( )-( )-( )-( )-( ) 1,197. 1,333. 2,426. KFXW6024-( )-( )-( )-( )-( ) 1,238. 1,391. 2,575. KFXW7224-( )-( )-( )-( )-( ) 1,352. 1,525. 2,796. KFXW4830-( )-( )-( )-( )-( ) 1,233. 1,380. 2,575. KFXW6030-( )-( )-( )-( )-( ) 1,280. 1,446. 2,755. KFXW7230-( )-( )-( )-( )-( ) 1,323. 1,513. 2,899. KFXW4836-( )-( )-( )-( )-( ) 1,268. 1,426. 2,729. KFXW6036-( )-( )-( )-( )-( ) 1,324. 1,502. 2,888. KFXW7236-( )-( )-( )-( )-( ) 1,422. 1,622. 3,307. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double * cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 6 for the proper cutout code. *Square tables may not have double cutout codes Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are extruded aluminum and finished in a highly durable textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Maintenance: See pages 26-27. Note: Pixel tables are Greenguard certified. 17

Marc Krusin Pixel Table Series Y-Leg Tables, Fixed, Flip, and Fold Tops description w d h table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KYXW Work Height, Fixed Top 72 36 28 3 /4 116 84 36 28 3 /4 131 96 48 28 3 /4 KYPW Work Height, Flip Top, Casters 72 36 28 3 /4 118 84 36 28 3 /4 133 KYDW Work Height, Y-Fold Top, Casters 96 48 28 3 /4 Order Code Finishes Example: KYPW7236-C-142-367T- Y-906T KYPW7236 36 x72 rectangle, Y-Leg, V-Fold, Casters C Locking casters 142 Grey Ash laminate 367T Platinum flat edgeband Y No grommet 906T Aluminum legs Specify: 1. Pattern number 2. Locking caster or glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Flat edgeband finishes: Black (suffix 111T) Mink (suffix 324T) Innertone (suffix 386T) Platinum (suffix 367T) Folkstone (suffix 004T) White (suffix 118T) Leg/grommet finishes: Black (suffix 111T) Bright White (suffix 118T) * Medium Grey (suffix 115T) Sterling (suffix 906T) Glides/Casters: Glides (suffix G) Casters (suffix C) Note: Glides are not available on flip top and V-Fold tables. *For tables with bright white legs, the face of the casters are white and the edge is black. For all other leg finishes, casters are all black. 18

KnollStudio GSA pattern no. laminate/abs edge laminate/urethane edge veneer/wood edge KYXW7236-( )-( )-( )-( )-( ) $2,014. $2,202. $3,967. KYXW8436-( )-( )-( )-( )-( ) 2,154. 2,318. 4,460. KYXW9648-( )-( )-( )-( )-( ) KYPW7236-(C)-( )-( )-( )-( ) 2,240. 2,429. 4,251. KYPW8436-(C)-( )-( )-( )-( ) 2,398. 2,573. 4,624. KYDW9648-(C)-( )-( )-( )-( ) Electrical Cutout Options: ($29 list per cutout) Tables may be specified with no cutouts (code Y). For single or double cutout codes, please choose your electrical module(s) then refer to the cutout matrix on page 0 for the proper cutout code. Note: V-Fold tables can only be specified with a center-center cutout which will be located at the center of each table top panel. Construction Laminate and Veneer tops: Constructed of particle board substrates sandwiched between laminate or wood veneer top and phenolic backer sheet, or laminate bottom. Edges can be specified with a flat ABS or molded urethane edge, or solid wood for veneer tops only. Solid wood edges can only be specified on tables with a wood veneer top. Edge and top will match. Legs: Legs are constructed using a combination of cast and extruded aluminum. Base and upper mounting plates are cast aluminum and bolted to an extruded aluminum vertical stem. Finished in a highly textured powder coat paint. Features Ganging tables: Each table is fitted with a Pixel connector on the underside of each corner. To join the tables, align the mechanisms and slide the lever along the curved path to engage. Maintenance: See pages 26. Note: Pixel tables are Greenguard certified. 19

Marc Krusin Pixel Table Series Column Leg Tables description w d h top table wgt. (lbs) Designer(s): Marc Krusin, 2015 Award(s): Best of Neocon Gold Award, 2015 KBXW Work Height, Fixed Top, Knife Edge 36 28 3 /4 round 48 KBXL Lounge Height, Fixed Top, Knife Edge 36 23 1 /2 round 47 KBXC Counter Height, Fixed Top, Knife Edge 36 36 round 49 KBXB Bar Height, Fixed Top, Knife Edge 36 42 round 50 KBXW Work Height, Fixed Top, Knife Edge 30 30 28 3 /4 square 45 KBXL Lounge Height, Fixed Top, Knife Edge 30 30 23 1 /2 square 44 KBXC Counter Height, Fixed Top, Knife Edge 30 30 36 square 46 KBXB Bar Height, Fixed Top, Knife Edge 30 30 42 square 46 Order Code Finishes Example: KBXB36D-G-111-300-Y- 111T KBXB36D 36 diameter, round, counter height G Glides 111 Black laminate 300 Black molded edgeband Y No grommet 111T Jet Black legs Specify: 1. Pattern number 2. Glide selection 3. Top finish selection 4. Edgeband selection 5. Cutout option 6. Leg finish Colored laminate finishes: Bright White, matte (suffix 118) Folkstone, matte (suffix 114) Black, matte (suffix 111) Woodgrain laminate finishes: Medium Cherry (suffix 124) Natural Maple (suffix 125) Natural Cherry (suffix 126) Walnut (suffix 127) Light Ash (suffix 139) Warm Ash (suffix 140) Whitened Ash (suffix 141) Grey Ash (suffix 142) Classic Oak (suffix 143) Graphite Pear (suffix 144) Zebra (suffix 145) Veneer top/edge finishes: American Walnut (suffix AW) Natural Oak (suffix ON) Fumed Oak (suffix OF) Ebonized Oak (suffix OE) Molded edgeband finishes: Black (suffix 300) Mink (suffix 324) Innertone (suffix 386) Platinum (suffix 367) Folkstone (suffix 004) Leg/grommet finishes: Jet Black (suffix 111T) Bright White (suffix 118T) Medium Grey (suffix 115T) Sterling (suffix 906T) Glides: Glides (suffix G) 20

KnollStudio GSA pattern no. laminate/urethane edge veneer/wood edge KBXW36D-(G)-( )-( )-( )-( ) $1,238. $3,090. KBXL36D-(G)-( )-( )-( )-( ) 1,222. 3,081. KBXC36D-(G)-( )-( )-( )-( ) 1,250. 3,101. KBXB36D-(G)-( )-( )-( )-( ) 1,264. 3,114. KBXW3030-(G)-( )-( )-( )-( ) 1,191. 2,931. KBXL3030-(G)-( )-( )-( )-( ) 1,178. 2,920. KBXC3030-(G)-( )-( )-( )-( ) 1,203. 2,941. KBXB3030-(G)-( )-( )-( )-( ) 1,218. 2,957. Electrical Cutout Options: ($29 list per cutout) Tables may be specified with zero or one round grommet. Please refer to page 6 for the proper cutout code. Note: Column base tables can only accommodate the KE1, KE2, and KE3 electrical modules. Construction Laminate and Veneer tops: Constructed of an MDF core sandwiched between laminate or wood veneer top and phenolic backer sheet or laminate bottom. Reverse knife edge is only available in a molded urethane edge and a solid wood edge. ABS flat edge is not available. Legs: Legs are extruded aluminum and finished in a highly durable textured powder coat paint. 21

Marc Krusin Pixel Electrical Round Grommet, KE1, KE2, KE3 description type power cord Designer(s): Marc Krusin, 2015 KERG Round grommet Round Grommet n/a KE1 Two receptacle module 2 Power 48 Cordset 2 Power 72 Cordset 1 Power, 1 USB 48 Cordset 1 Power, 1 USB 72 Cordset KE2 Three receptacle module 3 Power 48 Cordset 3 Power 72 Cordset 2 Power, 1 USB 48 Cordset 2 Power, 1 USB 72 Cordset KE3 Four receptacle module 4 Power, 1 USB 48 Cordset 4 Power, 1 USB 72 Cordset 2 Power, 2 USB 48 Cordset 2 Power, 2 USB 72 Cordset Order Code Ordering Information Construction Example: KE1200C72-BK KE1 KE1 Electrical Module 200 2 Power C72 72 Cordset BK Black finish Specify: 1. Pattern number 2. Case Finish Case and Receptacle Finishes: Black case with Black receptacles (suffix BK) White case with White receptables (suffix WH) Round Grommet Finishes: Jet Black (suffix 111T) Bright White (suffix 118T) Medium Grey (suffix 115T) Sterling (suffix 906T) Cutout Codes: Please refer to the Grommet and Electrical Module Cutout Matrix on page 6 for table compatibility and cutout codes. Description: KERG: Die-cast aluminum with powder coat matte paint finish. KE1: Die-cast aluminum and plastic with powder coat matte paint finish. KE2: Plastic construction with a soft-touch finish. KE3: Plastic construction with integral gloss finish. 22

KnollStudio GSA pattern no.. KERG-( ) $25. KE1200C48-( ) 236. KE1200C72-( ) 236. KE1101C48-( ) 337. KE1101C72-( ) 337. KE2300C48-( ) 246. KE2300C72-( ) 246. KE2201C48-( ) 343. KE2201C72-( ) 343. KE3400C48-( ) 380. KE3400C72-( ) 380. KE3202C48-( ) 543. KE3202C72-( ) 543. Electrical USB: The standard USB option that is included in the KE1, KE2, and KE3 modules will have (2) USB jacks per position. For example a KE1101C72 module includes (1) Power and (1) USB but would actually have (1) Power and (2) USB jacks. Standard USB: 1Amp 23

Marc Krusin Pixel Electrical KE4, KE5, KE7, KE8 description type power cord Designer(s): Marc Krusin, 2015 KE4 Four receptacle module 4 Power 48 Cordset 4 Power 72 Cordset 3 Power, 1 USB 48 Cordset 3 Power, 1 USB 72 Cordset 2 Power, 2 USB 72 Hardwire 3 Power, 1 USB 48 Pixel Link 3 Power, 1 USB 60 Pixel Link 3 Power, 1 USB 72 Hardwire 2 Power, 2 USB 48 Cordset 2 Power, 2 USB 72 Cordset 2 Power, 2 USB 48 Pixel Link 2 Power, 2 USB 60 Pixel Link KE5 Four receptacle module 3 Power, 1 High Speed USB 48 Cordset 3 Power, 1 High Speed USB 72 Cordset 4 Power 48 Cordset 4 Power 72 Cordset 3 Power, 1 High Speed USB 48 Pixel Link 3 Power, 1 High Speed USB 60 Pixel Link 3 Power, 1 High Speed USB 72 Hardwire 2 Power, 2 High Speed USB 48 Cordset 2 Power, 2 High Speed USB 72 Cordset 2 Power, 2 High Speed USB 48 Pixel Link 2 Power, 2 High Speed USB 60 Pixel Link 2 Power, 2 High Speed USB 72 Hardwire KE7 Four receptacle module with clamp mount 3 Power, 1 High Speed USB 72 Cordset 4 Power 72 Cordset 2 Power, 2 High Speed USB 72 Cordset KE8 Three receptacle module 3 Power 48 Cordset 3 Power 72 Cordset 3 Power 48 Pixel Link 3 Power 60 Pixel Link 3 Power 72 Hardwire 2 Power, 1 High Speed USB 48 Cordset 2 Power, 1 High Speed USB 72 Cordset 2 Power, 1 High Speed USB 48 Pixel Link 2 Power, 1 High Speed USB 60 Pixel Link 2 Power, 1 High Speed USB 72 Hardwire Order Code Example: KE8300L60-BK KE8 KE8 Electrical Module 300 3 Power L60 60 Pixel Link BK Black finish Ordering Information Case and Receptacle Finishes: Black case with Black receptacles (suffix BK) White case with White receptables (suffix WH) Pixel Link Pixel Link is a non-sequential power system that allows users to daisy chain multiple power centers together. Please specify a Starter Box (KLSC) if using the Pixel Link system. Pixel Link s brain allows users to connect up to 8 power/data centers off of one infeed. The smart LED indicators built into the Starter Box will illuminate green when you re connected and ready to plug in. A red light means that you ve linked too many units. Specify: 1. Pattern number 2. Case Finish Cutout Codes: Please refer to the Grommet and Electrical Module Cutout Matrix on page 6 for table compatibility and cutout codes. Note: Power Modules with a Pixel Link require a Starter Box. 72 wide tables require a jumper cable. Please refer to page 28 of the price list for Pixel Link Starter Boxes and Cables. 24

KnollStudio GSA pattern no.. KE4400C48-( ) $441. KE4400C72-( ) 441. KE4301C48-( ) 486. KE4301C72-( ) 486. KE4202H(L,R)-( ) 526. KE4301L48-( ) 549. KE4301L60-( ) 551. KE4301H(L,R)-( ) 553. KE4202C48-( ) 576. KE4202C72-( ) 576. KE4202L48-( ) 679. KE4202L60-( ) 681. KE5301C48-( ) 605. KE5301C72-( ) 605. KE5400C48-( ) 619. KE5400C72-( ) 619. KE5301L48-( ) 632. KE5301L60-( ) 634. KE5301H(L,R)-( ) 675. KE5202C48-( ) 702. KE5202C72-( ) 702. KE5202L48-( ) 730. KE5202L60-( ) 732. KE5202H(L,R)-( ) 771. KE7301C72-BK 605. KE7400C72-BK 620. KE7202C72-BK 702. KE8300C48-( ) 469. KE8300C72-( ) 469. KE8300L48-( ) 497. KE8300L60-( ) 499. KE8300H(L,R)-( ) 539. KE8201C48-( ) 578. KE8201C72-( ) 578. KE8201L48-( ) 607. KE8201L60-( ) 609. KE8201H(L,R)-( ) 648. Construction Description: KE4: Die-cast aluminum with powder coat matte paint finish. KE5: Aluminum case with powder coat matte paint finish. KE7: Aluminum case with powder coat matte paint finish. * KE8: Aluminum case with powder coat matte paint finish. *KE7 Electrical Module is compatible with flat edge tops only. This mount will not work with knife edge tables. Electrical USB: The standard USB option that is included in the KE4 module will have (2) USB jacks per position. For example a KE4202C72 module includes (2) Power and (2) USB but will actually have (2) Power and (4) USB jacks. The High Speed USB option that is included in the KE5, KE7, and KE8 modules will only have (1) USB jack per position. For example a KE5202C72 module includes (2) Power and (2) High Speed USB and will have (2) Power and (2) High Speed USB jacks. Standard USB: 1 Amp High SPeed USB: 2.1 Amps 25