SC Type Fiber Optic Connectors HSC Series Features 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 573 (F4 type fiber optic connectors) IEC 61754-4 2. Plugs with strain relief boot Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical bend direction. The color of the boot identify the type of polishing: : polishing Light purple: Advanced (Ad) polishing Green: Angled polishing (A) Other colors are also possible. 3. Zirconia Split Sleeve Adapter Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule. 4. Duplex SC Type: Rigid Type Available in following types; H type 8.5 mm spacing between the fibers, for high density applications. F type 12.7 mm spacing between the fibers, low profile, for LAN applications. Refer to page 3 for further information. 5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards Floating mechanism with Duplex SC plug. It is also fully compatible with the HSCF fixed type. 6. Simplified Plugs and Receptacles. Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection. Refer to page 43 for further information. Applications LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other applications requiring reliable fiber optic connections. 27
Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C Optical Characteristics Item Test Method (IEC 613) Specifications (SM) Wavelength 131nm (LD).5dB max. (, Ad, A) Insertion Loss (GI) Wavelength 131nm (LED).3dB max. () (SM) 22dB min. () 4dB min. (Ad) Return Loss Wavelength 131nm (LD) 6dB min. (A) (GI) 22dB min. () Mechanical Characteristics Environmental Characteristics Engagement and Separation /force Ferrule withdrawal force Measured with corresponding connector. Extract zirconia gauge 2.4 ±.5 mm dia Copper alloy split sleeve 2N to 5.N from split sleeve. Zirconia split sleeve 2N to 3.N Cable retention (Straight pull) 8N tensile load for one minute. Durability (cycles, mating/un-mating) 1 times Vibration Frequency: 1 to 55 Hz, single amplitude of.75 mm, 2 hours in each of the 3 axis. Shock Acceleration of 81 m/s 2, 6 ms duration, sin half-wave waveform, 1 cycles in each of the 3 axis. Humidity -1 C to 65 C, humidity: % to 6% (Temperature/ humidity- cycles) 2 cycles Simplex plug Duplex plug 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, dislocation of clamp or cable. Change of temperature -4 C to +75 C 42 cycles (Complies with Telcordia standard GR-326-CORE) Dry heat 6 hours at 85 C Cold 6 hours at -25 C Salt mist 48 hours in a 5% concentration of salt mist No significant corrosion. Engagement force: 1.6 N max. Separation force: 1.6 N max. Engagement force: 3 N max. Separation force: 3 N max. 1) Insertion loss fluctuation after test:.2db max. 2) No visible damage, cracks or part dislocation. Materials Part Simplex plug housing Spring Ferrule Simplex adapter housing 4-position adapter housing 5-position adapter housing Receptacle housing Attenuator housing Split sleeve Dust cap Material Synthetic resin Stainless Steel Zirconia Synthetic resin or Zinc alloy Synthetic resin Synthetic resin Zinc alloy Zinc alloy Zirconia or copper alloy Synthetic resin 28
Function diagram Simplex type SC type plug housing Strain relief type (For Cable Diameter: 2 mm & 3mm) HSC-PH2-E1,E2,E5 HSC-PH3-B1,B2,B5. mm fiber Light weight type Adapter-Panel Mounting Plastic Housing Products HSC-A3 HSC-A3-D1 HSC-A3-D2 Die Cast Housing Products HSC-A2 HSC-A2-D1 Conversion adapter FC to SC - Screw Mounting HSC-PH.-E1,E2,E5 Short length type (For Cable Diameter: 2mm) HSC-PH2-E1-A Short length type (For Cable Diameter: 3mm) HSCJ-HRFCJ-B FC to SC - Panel Mounting HSCJ-HRFCJ-C ST to SC - Screw Mounting HSC-PH3-A4 Conversion adapter - FC jack to SC Plug HSCP-HRFCJ-1, 2 HSCP-HRFCJ-1AS, 2AS HSCJ-HSTJ-B Receptacle HSC-R1-B,R2-B Simplified receptacle HSC-SR-1,D1 HSC-SR-2,D2 <Tool Insertion/Extraction Connectors> SC2 type plug housing Long strain relief (For Cable Diameter: 2 mm & 3mm) HSC2-PH2-E1,E2,E5 HSC2-PH3-B1,B2,B5. mm fiber Type HSC2-PH.-E1,E2 Short length type (For Cable Diameter: 2 mm) HSC2-PH2-E1-A Short length type (For Cable Diameter: 3mm) Adapter 4-Position Adapter Panel Mounting type HSC2-4A HSC2-4A-D1 5-Position Adapter Panel Mounting type HSC2-5A Simplified receptacle HSC2-PH3-A HSC2-8SR-1 HSC2-8SR-D1 2
Duplex type <Plug Housings> <Adapters> F type Plug Housing (For Cable Diameter: 2mm&3mm) HSCF-2PH2-E1,E2 HSCF-2PH3-B1,B2 <Complies with ANSI Standard for adjustable Type> For Single mode (For Cable Diameter: 2mm&3mm) HSCM-2SPH2-B1,B2 HSCM-2SPH3-B1,B2 For Multi mode (For Cable Diameter: 2 mm & 3mm) HSCM-2GPH2-B1 HSCM-2GPH3-B1 H type Plug Housing (For Cable Diameter: 2 mm & 3mm) HSCH-2PH2-B1,B2 HSCH-2PH3-B1,B2 F type Panel Mounting HSCF-2A(P) HSCF-2A-D(P) H type Snap - in HSCH-2A1(P) HSCH-2A1-D(P) Screw Mounting HSCH-2A(P) HSCH-2A-D(P) Fixed attenuators For single mode For GI HSC-AT 11K-A ** See Page 85 for details. HSC-AT5S-B ** A Terminators Plug type Tool- Insertion/Removal HSC-TM-P1 HSC2-TM-P1 Receptacle type Tool Insertion/Removal HSC-TM-R1 See Page 8 for details. HSC2-TM-R1 3
Simplex type Strain relief type 25 7.4. Light weight type (For.mm fiber) 25 33 7.4. Short length type (For 2mm Cable) Short length type (For 3mm Cable) 25 36.5 Boot color Polishing type HSC-PH.-E1(6) 74-33-2-6 HSC-PH.-E2(31) 74-354-6-31 Light purple Ad HSC-PH.-E5(31) 74-314-5-31 Green A 25 36.5 55 Fiber cable type Boot color Polishing type Outer jacket fixing HSC-PH2-E1(31) 74-327-3-31 HSC-PH2-E2(31) 74-328-6-31 Ø2mm Light purple Ad Glue HSC-PH2-E5(31) 74-318-6-31 Green A HSC-PH3-B1(31) 74-222-5-31 HSC-PH3-B2(31) 74-223-8-31 Ø3mm Light purple Ad Crimp HSC-PH3-B5(31) 74-32-7-31 Green A 7.4. HSC-PH2-E1-A(31) HSC-PH2-E2-A(31) HSC-PH2-E5-A 74-464-4-31 74-48--31 74-3124-2 Boot color Polishing type Outer jacket fixing Light purple Green Ad A Glue 7.4. HSC-PH3-A4(31) HSC-PH3-A4(32) 74-245--31 74-245--32 Boot color Polishing type Outer jacket fixing Crimp Light purple Ad 31
Tool Insertion/Extraction Plug Housings Strain relief type 55 Light weight type (For.mm fiber) 33 Short length type (For 2mm Cable) 36.5 Short length type (For 3mm Cable) 36.5 7.2 7.2 7.2 7.2 6 Fiber cable type Boot color Polishing type Outer jacket fixing HSC2-PH2-E1(31) 74-32--31 HSC2-PH2-E2(31) 74-33-8-31 Ø2mm Light purple Ad Glue HSC2-PH2-E5(31) 74-31--31 Green A HSC2-PH3-B1(31) 74-226-6-31 HSC2-PH3-B2(31) 74-227--31 Ø3mm Light purple Ad Crimp HSC2-PH3-B5 74-3123- Green A 6 Boot color Polishing type HSC2-PH.-E1(31) 74-421-1-31 U HSC2-PH.-E2(31) 74-422-4-31 Light purple Ad 6 HSC2-PH2-E1-A HSC2-PH2-E2-A 74-482-6-74-481-3- Boot color Polishing type Outer jacket fixing Glue Light purple Ad 6 HSC2-PH3-A(31) 74-15--31 Boot color Polishing type Outer jacket attachment Crimp Note : Please contact HIROSE for other variations. 32
Receptacles 15.2 12.2 13.4 2-Ø2.3 Note: Designed for power meter sensors 74-22-6-5 74-23--5 Ferrules For, Ad and U 3 1.5 Ø2.4±.5 ØA (Hole diameter) +.1 7.5 +.5 16 (Hole diameter) Ø1 Ø4.6 For A Ø2.4±.5 Ø1 ØA +.1 16.15 8.5 +.5 Ø4.6 Ø7 Ø3 Ø1 M15 HSC-R1-B(5) HSC-R2-B(5) Remarks For MM For SM A dimension Applicable Fiber cable HSC-F321-A125(1) HSC-F321-A1255(1) 74-7--1 74-2-2-1.125.1255 SM,MM HSC-F321-A126(1) 74-71-1-1.126 (Hole diameter) Ø1(Hole diameter) A dimension Applicable Fiber cable HSC-F31-A125 HSC-F31-A126 74-311-7 74-312-.125.126 SM HSC-F31-A127 74-313-2.127 (1)No gap design. (2)The entrance angle of the fiber has been set at 6 for easy fiber insertion. Minimal gap:(.1mm max.) 6 fiber entrance angle 33
Adapters - Panel Mounting SC adapters SC/SC Plastic Housing 27.4 3.4 -.5 -.5 13 18 22 18±.1 Ø2.3.5.5.5 2-M2.4 or 2-Ø2.4 Panel thickness: 1.6mm +.2.5 HSC-A3(51) HSC-A3-D1(2) HSC-A3-D2(6) 74-2-1-51 74-217-5-2 74-37--6 Split sleeve Copper alloy Zirconia Zirconia Remarks,Ad A SC/SC Die Cast Metal Housing 27.4 3.4 18 22 13 -.5 -.5 18±.1 HSC-A2(51) HSC-A2-D1(1) Ø2.3.5 74-2--51 74-258-2-1.5.5 Panel thickness: 1.6mm 2-M2.4 or 2-Ø2.4 +.2.5 Split sleeve Copper alloy Zirconia SC2 adapters SC/SC2 4-way adapter 24 3 28.2 -.2 -.5 28.5 15 13.5.5 Panel thickness: 1.6mm HSC2-4A(51) HSC2-4A-D1(1) 74-24-1-51 74-2-5-1 Split sleeve Copper alloy Zirconia SC/SC2 5-way adapter (for Multi-mode fiber) 24 3 35 +.5 35.3 +.5 15 13 +.5 +.5 Panel thickness: 1.6mm HSC2-5A(51) 74-25-4-51 Split sleeve Copper alloy 34
Conversion adapters FC / SC Screw Mounting M8.75 21.2 5.5 3.5 12.2 13.4 Ø.5.5 2-M2.4 or 2-Ø2.4 +.2 +.5 M15 Ø1 13.4±.1 HSCJ-HRFCJ-B(51) 74-21-3-51 Split sleeve Copper alloy FC / SC Snap-in and/or Screw Mounting.4 7.4 18 22 Ø +.5.5 2-M2.4 or 2-Ø2.4 +.2 +.5 M8.75 18 21.2 Ø2.3 13.4±.1 Panel thickness: 1.6mm HSCJ-HRFCJ-C(51) 74-26--51 ST / SC Screw Mounting M15 Ø1 13.4 Ø 2 Ø7 Split sleeve Copper alloy +.5 +.5 2-M2.4 or 2-Ø2.4 +.2 +.5 2-Ø2.2 1.2 Ø8.2 14.7 28.4 13.7 13.4 ±.1 HSCJ-HSTJ-B(51) 74-12-3-51 Split sleeve Copper alloy 35
FC / SC.4 M8.75 7.4 21 27. Split sleeve Polishing type Applicable Fiber cable HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51) 74-23--51 74-288-3-51 74-24-3-51 74-28-6-51 Copper alloy Ad Ad GI-5/125 SM-.5/125 The positions of SC guide key and FC guide slot will not be always aligned. 32 13.7 Cap 75 Ø3.6 Hole 11 17.8 5 1.5 7.4 Ø1 () FC / SC 15 (3.) Split sleeve Polishing type Applicable Fiber cable HRFCP-HSCJ-1(51) 71-65--51 GI-5/125 HRFCP-HSCJ-1AS(51) 71-18--51 Ad Copper alloy HRFCP-HSCJ-2(51) 71-85-7-51 SM-.5/125 HRFCP-HSCJ-2AS(51) 71-1-3-51 Ad The positions of SC guide slot and FC guide key will not be always aligned. HSC-C2 74-61-8 Applicable products HSC-A2, HSC-A3, HSCJ-HRFCJ-B, CHSCJ-HSTJ-B, HSC-R1-B, HSC-R2-B 36
BMounting Dimensions Unit: mm Combination Dimensions Adapter Housing HSC-PH2-E1 a b c d e f Plug Panel Adapter Plug HSC-A2 HSC-A2-D1 HSC-A3 HSC-A3-D1 HSC-PH2-E2 HSC-PH3-B1 HSC-PH3-B2 HSC-PH2-E1-A HSC-PH3-A4 58 28 15.2 53.4 23.4 1.6 3.5 28 15.2 34. 23.4 1.6 HSC-PH.-E1 36 26 15.2 31.4 21.4 1.6 HSC2-PH2-E1 HSC2-4A HSC2-4A-D1 HSC2-5A HSC2-5A-D1 HSC2-PH2-E2 HSC2-PH3-B1 HSC2-PH3-B2 HSC2-PH3-A HSC-PH2-E1-A 58 ---- 13.5 53.4 ---- 8. 3.5 ---- 13.5 34. ---- 8. HSC2-PH.-E1 36 ---- 13.5 31.4 ---- 8. HSC-PH2-E1 HSC-R1-B HSC-R2-B HSC-PH2-E1 HSC-PH3-B1 57.5 27.5 14.7 ---- ---- ---- HSC-PH3-B2 Note: Panel thickness: 1.6mm Cable assembly SC strain relief type. Fiber cable type Polishing type Cable Diameter HSC-SPE2-F3Q-L 74-173-2 Ø2mm HSC-S2-F3A-L 74-18-2 Ø3mm HSC-ASPE2-F3Q-L 74-171-7 Ø2mm SM-.5/125 Ad HSC-AS2-F3A-L 74-14-2 Ø3mm HSC-CSPE2-F3Q-L Ø2mm A HSC-CS2-F3A-L Ø3mm HSC-SPE2-F3P-L 74-181- Ø2mm GI-5/125 HSC-S2-F3B-L 74-186-4 Ø3mm Note 1: The "L" within the Product Number indicates the length of the cable illustrated on the drawing. Please specify values in metric units. Note 2: HSC2 cable assemblies are also available. Note 3: A polishing is performed at an angle of 8. Mating with connectors polished or Ad is not possible. Note : Please contact HIROSE if you have any requests. 37
Tools Crimp Tool Applicable connector HSC-T3 74-287- SC plug for 2mm, 3mm cable. <Locations> (This is used in crimping of Kevlar at time of the plug termination.) (1)2mm Jacket crimping: Please select section A 3mm Jacket crimping: Please select section C (2)Kevlar TM crimping: Please select section B HSC2 Insertion/Extraction Tool HSC-T1-L 74-286-8 Applicable Products HSC2 series. <How to operate> 1.Open the tip of tool by compressing levers as shown below. Hold/release lever 2.Insert the tool (with opening the tips) into adapter. 3.Release the levers (then the tool catch HSC2 plug) and you can release the connector. Plug assemble Tool HSC2-PH2/CVMD 2-62-1 38
SC Duplex BNotes SC duplex adapters can be also connected with Simplex SC plugs. SC type attenuators (HSC-AT11K-Aπ-π) can be connected only with F type adapters. Plug Housing F Type 22.1 12.7 7.8 25 55 Applicable Cable Diameter Boot Color Polishing type HSCF-2PH2-E1(P)(31) 74-21-3-31 Ø2mm HSCF-2PH2-E2(P)(31) 74-212-6-31 Light purple Ad HSCF-2PH3-B1(P)(31) 74-232--31 Ø3mm HSCF-2PH3-B2(P)(31) 74-236-1-31 Light purple Ad H Type 8.5 15.8 25 55 Applicable Cable Diameter Boot Color Polishing type HSCH-2PH2-B1(P)(31) 74-246-5-31 Ø2mm HSCH-2PH2-B2(P)(31) 74-258-4-31 Light purple Ad HSCH-2PH3-B1(P)(31) 74-254-3-31 Ø3mm HSCH-2PH3-B2(P)(31) 74-25-2-31 Light purple Ad 3
Adapters F type Snap-in and/or Screw Mounting Ø2.3 M2.4 2.4 +.2 34.7 3.7 12.7 25..5 26.2 +.3 3.7±.1.4 3 27.4 Panel thickness: 1.6mm Split sleeve Color HSCF-2A(P)(51) 74-28-6-51 Copper sleeve HSCF-2A-D(P)(6) 74-24--6 Zirconia HSCF-2A-D2(P)(6) 74-2112-8-6 Green H type Snap-in 2.5 17. 27.4 18 +.5 (8.5) 13 Split sleeve Color HSCH-2A1(P)(51) 74-266-2-51 Copper sleeve HSCH-2A1-D(P)(2) 74-2117-1-2 Zirconia H type Snap-in and/or Screw Mounting 17. (8.5) Ø2.3 3 18 +.5 M2.4 or Ø2.4 +.2 23 18 15.5 3 +.3 Panel thickness: 1.6mm 27.4 13 +.3 18±.1 Panel thickness: 1.6mm Split sleeve Color HSCH-2A(P)(51) 74-22-1-51 Copper sleeve HSCH-2A-D(P)(2) 74-262-1-2 Zirconia HSCH-2A-D2(P)(3) 74-218--3 Green 4
BSC Duplex connector assemblies. Fiber cable type Polishing type Cable Diameter HSCF-SP2PP-F3Q-L HSCH-SP2PP-F3Q-L HSCF-SP2PP-F3QW-L HSCH-SP2PP-F3QW-L HSCF-SP2PP-F3A-L HSCH-SP2PP-F3A-L HSCF-SP2PP-F3AW-L HSCH-SP2PP-F3AW-L HSCF-ASP2PP-F3Q-L HSCH-ASP2PP-F3Q-L HSCF-ASP2PP-F3QW-L HSCH-ASP2PP-F3QW-L HSCF-ASP2PP-F3A-L HSCH-ASP2PP-F3A-L HSCF-ASP2PP-F3AW-L HSCH-ASP2PP-F3AW-L HSCF-SP2PP-F3P-L HSCH-SP2PP-F3P-L HSCF-SP2PP-F3PW-L HSCH-SP2PP-F3PW-L HSCF-SP2PP-F3B-L HSCH-SP2PP-F3B-L HSCF-SP2PP-F3BW-L HSCH-SP2PP-F3BW-L 74-431- 74-413-7 74-418- 74-438-8 74-43- SM-.5/125 GI-5/125 Note 1: The "L" within the Product Number indicates the length of the cable. Please specify "L" in mm. Note 2: Please contact us if you have any requests. HIROSE will offer excellent solutions to meet your requirements. Ad Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord Ø2mm Ø2mm Zip cord Ø3mm Ø3mm Zip cord BMounting Dimensions Plug Plug Adapter Panel <F Type> Unit: mm Combination Dimensions Adapter Housing a b c d e f HSCF-2A(P) HSCF-2A-D(P) HSC-PH*-E# HSCF-PH*-B#(P) HSC-PH*-A4 HSC-PH.-E# 58 28 15.2 53.4 23.4 1.6 3.5 28 15.2 34. 23.4 1.6 36 26 15.2 31.4 21.4 1.6 <H Type> Combination Dimensions Adapter Housing a b c d e f HSCH-2A(P) HSCH-2A-D(P) HSCH-2A1(P) Note 1: * indicates cable diameter: Note 2: # indicates polishing type: HSC-PH*-E# HSCH-2PH*-B#(P) HSC-PH*-A4 HSC-PH.-E# 2= Ø2mm diameter 3= Ø3mm diameter 1= polishing 2= Ad polishing 58 28 15.2 53.4 23.4 1.6 3.5 28 15.2 34. 23.4 1.6 36 26 15.2 31.4 21.4 1.6 41
Complies with ANSI Standard ANSI X3T.3 Fibre Channel Physical and Signaling Interface Plug Housings For Single Mode. 23 12.7 1 8. 14.1 36.7 61.5 Applicable cable Boot color Polishing type HSCM-2SPH2-B1 74-21- Simplex-2mm dia. cable or dual fiber zip cable HSCM-2SPH3-B1 74-212-4 Simplex-3mm dia. cable or dual fiber zip cable HSCM-2SPH2-B2 74-2133-8 Simplex-2mm dia. cable or dual fiber zip cable Light purple Ad HSCM-2SPH3-B2 - Simplex-3mm dia. cable or dual fiber zip cable For Multi-mode. 23 12.7 8. 14.1 36.7 61.5 Applicable cable Boot color Polishing type HSCM-2GPH2-B1 74-214- Simplex-2mm dia. cable or dual fiber zip cable HSCM-2GPH3-B1 74-216-5 Simplex-3mm dia. cable or dual fiber zip cable Ferrules Convertional SC ferrules. Refer to page 33 for details. Adapters F type SC adapters. Refer to page 4 for details. 42
a Simplified Receptacles & Plugs Features 1.Space saving: Only 23.8mm plug length. Types of SC plug Length(mm) Simplified plug 23.8 SC plug for.mm fiber 33 SC2 plug for.mm fiber 33 Installation image In side equipment Out side equipment a SC Simplified plug SC or SC2 plug 43
Product Specifications Ratings Operating temperature range -25 C to +7 C Storage temperature range -25 C to +7 C Optical Characeristics Mechanical Characteristics Environmental Characteristics Item Test Method (IEC 613) Specifications Insertion Loss Return Loss Ferrule withdrawal (SM) (GI) (SM) (GI) Wavelength 131nm (LD) Wavelength 131nm (LED) Wavelength 131nm (LD).5dB max. (, Ad).3dB max. () 22dB min. () 4dB min. (Ad) 22dB min. () Extract zirconia gauge 2.4 ±.5 mm dia Copper alloy split sleeve 2N to 5.N from split sleeve. Zirconia split sleeve 2N to 3.N Durability 1 times (cycles, mating/un-mating) Frequency: 1 to 55 Hz, single amplitude of.75 mm, Vibration 2 hours in each of the 3 axis. Acceleration of 81 m/s 2, 6 ms duration, sine halfwave waveform, 1 cycles in each of the 3 axis. Shock Humidity resistance Temperature: -1 C to 65 C, humidity: % to 6% (Temperature/ humidity- cycles) 2 cycles Change of temperature Dry Heat 6 hours at 85 C Cold 6 hours at -25 C Temperature: -4 C / +75 C 42cycles (Complies with Telcordia standard GR-326-CORE) Insertion loss fluctuation after test:.2db max. No visible damage, cracks or part dislocation. Materials Simplified receptacle Part Housing Sleeve Split sleeve Plate Dust cap Simplified plug Part Ferrule Boot Ferrule cap Simplified plug extraction tool Part Extraction tool Material Synthetic resin Synthetic resin Zirconia or Copper alloy Stainless steel Synthetic resin Material Zirconia and Synthetic resin Synthetic resin Synthetic resin Material Synthetic resin 44
Simplified receptacle to SC Simplex / Shrouded S R 2-Ø2.3 S C 2-M2.4 Simplex / Unshrouded 8 +.5 2-M2.4 12.7 +.5 13 +.5 18±.1.5 +.5 22 18 12.5 S R JAPAN S C 16.2 22 18 JAPAN 7.4.4 3 26 Split sleeve Color HSC-SR-1(51) 74-32-4-51 Copper alloy HSC-SR-D1(2) 74-321-7-2 Zirconia HSC-SR-1(3) 74-32-4-3 None 3.35 6.3 12.5 7.8 18±.1 Split sleeve Color HSC-SR-2(51) 74-21-8-51 Copper alloy HSC-SR-D2(6) 74-22--6 Zirconia HSC-SR-2(3) 74-21-8-3 None Duplex H type / Shrouded 23 18 17. 15. ( 8.5 ) 26 3 18 +.5 2-M2.4 7.4 2-Ø2.3 13 +.5 18±.1 Panel thickness: 1.6mm Split sleeve Color HSCH-2SR-1(R)(51) 74-23-3-51 Copper alloy HSCH-2SR-D1(R)(1) 74-24-6-1 Zirconia HSCH-2SR-1(R)(3) 74-23-3-3 None Duplex H type / Shrouded (Without plate) 23 18 17. 15. ( 8.5 ) 26 3 18 +.5 2-M2.4 7.4 2-Ø2.3 13 +.5 18±.1 Split sleeve Color HSCH-2SR-3(R)(51) 74-3-7-51 Copper alloy HSCH-2SR-D3(R)(1) 74-31--1 Zirconia HSCH-2SR-3(R)(3) 74-3-7-3 None 45
4SR JAPAN 4SR JAPAN Duplex F Type / Unshrouded 2-Ø2.3 SCR 2SR 2-M2.4 or 2-Ø2.4 +.2 34.7 25.5 21.7 12.7 1 6.3 25.5 8 +.5 16.2 3.4 7.8 25.7 +.5 3.7±.1 Split sleeve Color HSCF-2SR-2(P)(51) 74-25--51 Copper alloy HSCF-2SR-D2(P)(2) 74-26-1-2 Zirconia HSCF-2SR-2(P)(3) 74-25--3 None Simplified Receptacles to SC2 4-position / Shrouded 2-Ø2.3 24.3 1.73 2-M2.4 or 2-Ø2.4 +.2 8-Position / Shrouded Ø2.3 24.3 1.7 3 8 S R 8 S R 2-M2.4 or 2-Ø2.4 +.2 6 64.6 6.6 55.4 56 +.5 6.6±.1 37.4 33.4 28.2 8 +.5 28.6 +.5 12.4 12.7 +.5 Split sleeve Color HSC2-4SR-1(51) 74-311-3-51 Copper alloy HSC2-4SR-D1(1) 74-312-6-1 Zirconia HSC2-4SR-1(3) 74-311-3-3 None 12.4 12.7 +.5 Split sleeve Color HSC2-8SR-1(51) 74-266--51 Copper alloy HSC2-8SR-D1(1) 74-27-8-1 Zirconia HSC2-8SR-1(3) 74-266--3 None 46
8-Position / Unshrouded Ø2.3 14.5 11.5 3 2-M2.4 2-Ø2.4 +.2 12.4 Simplified plug for.mm fiber 5 5 64.6 6.6 55.4 56 +.5 6.6±.1 12.7 +.5 Split sleeve Color HSC2-8SR-2(51) 74-318-2-51 Copper alloy HSC2-8SR-D2(1) 74-43--1 Zirconia HSC2-8SR-2(3) 74-318-2-3 None Ø2.44 ±.5 +.1 ØA (Hole diameter) 1.3 4.5 23.8 A dimension Boot color HSC2-FK-A125(31) 74-267-3-31.125 HSC2-FK-A126(31) 74-268-6-31.126 Black HSC2-FK-A1255(31) 74-26--31.1255 Split sleeve Zirconia 11.4 Copper alloy Split sleeve HSC-SLIT-SLEEVE(51) 74-275-1-51 Copper alloy HSC-D 74-264-5 Zirconia Extraction tool for Simplified plug 5 7 3 6 6 2 2 HSC-T1 74-35-5 HSC-T12 74-448-8 47