As early as 1974, when fiber optic technology was still in its infancy, Corning was working with Europe s leading Public Telecommunications

Accessories for Copper Communication Networks Edition1 CATALOG

Corning: An Experienced and Reliable Partner for You With over 150 years of experience in the world of telecommunications, Corning is an experienced partner you can trust to bring cost-effective solutions to your communication requirements. In the field of fiber optic cable technology, Corning was one of the original pioneers with expertise second to none. As early as 1974, when fiber optic technology was still in its infancy, Corning was working with Europe s leading Public Telecommunications companies in developing trial fiber optic cable routes. This was complemented in 1979 by additional projects in the USA. Together this pioneering work marked the start of the global business which exists today, comprising of a wide range of demanding customer projects. We at Corning offer the broadest range of end-to-end copper and fiber optic product solutions for customers cabling network. As system leaders we provide products not only as individual items but also as complete cable networks from a single source. Our global presence is your gain because, wherever you are located, Corning is close at hand. Our quality and environmental management systems are naturally certified to DIN EN ISO 9001 and ISO 14001. 3

The Customer is our Focal Point Our commitment is to meet the expectations of our customers unreservedly in supplying high-quality products and services for all communication networks. 4

: Global Cable and Hardware Business 1 4 6 7 2 A 3 5 8 9 10 12 13 2 1 B 3 4 8 5 6 12 9 7 10 11 11 A 1 2 3 4 5 6 7 8 9 10 11 12 Headquarters North-, South-America/Japan Hickory, NC, USA Saskatoon, Canada Montreal, Canada Winston-Salem, NC, USA Keller, TX, USA Kernersville, NC, USA Reynosa, Mexico Mexico City, Mexico Boca Raton, FL, USA Santo Domingo, Dominican Republic Rio Grande, Puerto Rico Buenos Aires, Argentina Tokyo, Japan B 1 2 3 4 5 6 7 8 9 10 11 12 13 Headquarters Europe, Asia/Pacific, Africa Munich, Germany Nordenham, Germany Hagen, Germany Neustadt, Germany Berlin, Germany Favières, France Turin, Italy Roseto degli Abruzzi, Italy Inofitas, Greece Gebze, Turkey Chengdu, China Ho Chi Minh City, Vietnam Ramadan City, Egypt Kuala Lumpur, Malaysia Jakarta, Indonesia Clayton, Australia Derby, GB Warrington, GB Whiston, GB Hemel Hempstead, GB Aberdeen, GB Madrid, Spain 5

Content Introduction Corning Product Range for Copper Communication Networks... 8 Mechanical and Heat-shrinkable Closures Introduction...10 Overview on Closures...12 Mechanical Closures for Pressurized Primary Networks Inline Closure UCN...16 Vault Cable Closure UCNV...22 Tool Case for Installation of UCN Closures...26 Inline Closure MHS P...28 Mechanical Closures for Secondary Networks Inline Closure UCA...32 Inline Closure MHS M...34 Distribution Closure BPR...40 Aerial Closure PEV...44 Temporary Splice Protection Closure MEP...46 Heat-shrinkable Closures for Pressurized Primary Networks Reinforced Inline Closures GSC CP...47 Heat-shrinkable Closures for Secondary Networks Reinforced Inline Closures GSC, GSC C...47 Standard Inline Closures SCX, SCX C...54 Repair Sleeves Wrap-around Repair Sleeves SCX R (Standard), GSC R (Reinforced)...59 Gas Torch Set...61 6

Content Connection and Distribution Systems, Cabinets and Boxes Connection and Distribution System 1001/2001 Series Introduction...64 Disconnection, Switch and Connection Strips...65 Grounding and Dropwire Connection Strip...67 Overvoltage / Overcurrent Protection...68 Plugs, Marking Caps, Cords...70 Tools...71 Mounting Frames, Cable Terminal Heads...72 Label Frames, Strip Dimensions...73 Technical Data...74 Cabinets and Boxes Cross-Connection Cabinet KVz...75 Wall-Mounted Distribution Enclosures / Boxes for 1001/2001 Series...76 Accessories for Distribution Enclosures / Boxes...78 Additional Information Training...82 Contacts...83 Other Catalogs Available in our Product Range...88 Note: The products shown in this catalog demonstrate some of the additional accessories available which are not part of the standard scope of delivery 7

Corning Product Range for Copper Communication Networks Introduction Central Office Central Office Homes MDF Apartment complex UCNV UCN, MHS P GSC CP Remote Terminal UCN / MHS P GSC CP PEV UCA / MHSM GSC / SCX UCA / MHSM / BPR GSC / SCX DB CCC CCC GSC SCX Large Business Customers PEV DB CCC UCN, MHS P GSC CP UCN, MHS P GSC CP HVT MDF = Main Distribution Frame CCC = Cross-Connection Cabinet DB = Distribution Box UCN, MHS P, UCA, UCNV, MHSE, PEV, GSC, SCX = Closures The Corning product range provides all main components necessary for connection and distribution of copper cables in communication networks. Corning offers a tip to tip product range from the central office to the subscriber - all out of one hand. Our product range comprises: For the central office and big private switches: Connection and distribution systems MDF. See catalog Connection and Distribution Systems. Distribution closures UCNV for the transition of the main cable to distribution cables For the cable line: Joint and branching closures / repair sleeves: Mechanical inline closures UCN and MHS P for pressurized main cables Mechanical inline closures UCA, MHS M and MEP for non-pressurized branching and distribution cables Mechanical distribution closure BPR for subscriber cables Heat-shrinkable inline closures GSC CP for pressurized main cables Mechanical free-breathing inline closures PEV for aerial cables Heat-shrinkable repair sleeves GSC R / SCX R for all non-pressurized cables Distribution components: Disconnection, connection and switching strips 1001/2001 Series Overvoltage- / overcurrent protection 1001/2001 Series Cable distribution cabinet for accommodating termination heads at switching and distribution points Termination heads for installation in cable distribution cabinets For buildings: Wall distribution cabinets for 1001/2001 Series, outdoor and indoor 8

Mechanical and Heat-shrinkable Closures 9

Closures for Copper Communication Networks Introduction General With the world s largest range of closures, Corning offers a complete line of solutions for connecting and distributing all types of communication cable. Closures are used to provide protection for splices on straight, branching and distribution cables. The mechanical and electrical continuity provided by the closures must be as though there had been no break in the cables at this point. This requirement applies regardless of the location of the cables, e.g. buried directly in the ground, installed in ducts or on aerial cable routes type of cable, e.g. pressurized or grease filled design of the cable, e.g. with laminated sheath or armoring. The mechanical continuity is achieved by strainrelieving (anchoring) the cable sheaths. The electrical continuity of any armoring or metallic foils in laminated sheaths is provided by a high-quality, low-resistance bond to ground bonding lines. It is provided to protect the installers and the electronic equipment from possible overvoltages which these cable elements may develop from external sources and then discharge. In addition these bonds can be joined to external grounding points. The Closure Range Closures are generally classified according to their design into mechanical and heat-shrink types. Mechanical closures comprise rigid closure tubes or domes with one or two end caps for the cable entrances. The sealing between the closure components themselves and to the cables is made by means of plastic compounds such as sealing tapes or gels or by silicone seals. Pressure is applied to the seals mechanically, i.e. with clips, hooks or screw fasteners. Mechanical closures can be re-entered and closed as required for maintenance or system expansion purposes. The main product of this type offered by Corning is the range of Universal Closures UCN, designed specially for the pressurized primary cable network and hence to withstand maximum stressing. There are also various solutions available for the nonpressurized secondary network, e. g. within the MHS range. Heat-shrink closures comprise heat-shrinkable sleeves which are wrapped around the splice and the cable ends. The closure is shrunk down using a gas torch to contract uniformly around the splice and the cable ends. An adhesive coating, also thermally activated, on the inside of the sleeve ensures an effective seal. There are different types of heat-shrink closure available for both the pressurized primary network and non-pressurized secondary network. 10

Closures for Copper Communication Networks Introduction Closure Design Straight or Inline Closure Configuration Incoming and outgoing cables on both sides of the closure. Aerial network Cable in ducts / manhole Direct buried network Butt Configuration All cables are fed into the closure on one side only. Aerial network Cable in manhole / hand-hole 11

Closures for Copper Communication Networks Overview on Closures Mechanical Closures UCN UCNV MHS P UCA MHS M BPR PEV MEP Heat-shrinkable Closures GSC CP, GSC C, GSC SCX 12

Closures for Copper Communication Networks Overview on Closures Closure Type UCN UCNV MHS P UCA MHS M BPR PEV MEP GSC CP GSC / C SCX / C See page 16 22 28 32 34 40 44 46 47 47 54 Cable Sealing Version mechanical heat-shrinkable X X X X X X X X X X X Cable pressurized non-pressurized Closure Application aerial duct / manhole buried Closure Configuration straight butt Network Level main distribution high * * Splice Capacity medium low * X Temporary Application Special application: Connection of trunk cables with cables to the MDF inside central offices Cable sealing version Main application Possible but not main application Not possible 13

Closures for Copper Communication Networks Mechanical Closures General Corning offers a complete range of mechanical closures for all applications in the copper telecommunication network. The core product of this range is the Universal Closure UCN, the mechanical closure most widely used in the world. More than eight million UCN are in service in pressurized and non-pressurized networks. The UCN is designed as an inline closure with incoming cable(s) on one side and outgoing cable(s) on the other side (straight joint). A modified UCN called UCNC is available as a butt closure with canister and one end cap which accommodates all cables fed in on the same side. Another special application of the UCN is the UCNV (UCN vault closure) which is used in exchange offices for connection of the trunk cable to the MDF cables. Further Closure Types As completion of the UCN range, further closure types are available: Type MHS P for pressurized and non-pressurized high-pair cables Types UCA, MHS M and BPR for non-pressurized low- and medium-pair cables Type PEV (free-breathing) for use on nonpressurized aerial cables Type MEP for temporary non-pressurized applications Mechanical closure UCN Features Access to splice area as often as required without the need of spare parts and consumables High-quality sealing material guarantees watertight encapsulation of the splice area Closure housings made of plastic which withstand high mechanical load Easy and fast installation without additional energy e.g. gas or electricity Re-opening and re-closing of the closure very simple to handle Reliable strain relief systems integrated in end caps No harmful substances are used Designed for at least 30 years lifetime The special features of the different types are described on pages 16 to 46. 14

Closures for Copper Communication Networks Heat-shrinkable Closures and Repair Sleeves Application Heat-shrinkable Closures Heat-shrinkable closures are used in communication cable networks, particularly in the distribution network, as inline closures for protecting and sealing the splice areas of copper cables. They can be used on cut and uncut cables for straight and branch splices. Up to 4 cables can be led into each side of the closure. The following series of closures are available for nonpressurized cable networks: Reinforced closure GSC, GSC C Standard closure SCX, SCX C For pressurized cable networks Corning supplies the reinforced closure GSC CP with tightness testing valve. Repair Sleeves Used for repairing of damaged cable sheaths. Reinforced repair sleeve GSC R Standard repair sleeve SCX R All RXS closure types and repair sleeves are suitable for direct buried installation and aerial application. Heat-shrinkable closures GSC CP, GSC C, GSC Features High mechanical strength Reliable sealing of the splice itself and of the sleeve to the cable sheath against moisture with hot melt adhesive Simple installation, only gas torch for installation required (torch set see page 61) Only a few different sizes required for all cable diameters Designed for at least 30 years lifetime No harmful substances are released during processing The special features of the different heat-shrinkable closures are described on pages 47 to 60. 15

Inline Closure UCN Description Design Application Universal Closures UCN are designed to protect straight or branch splices on high pair count copper cables against environmental influences. The closures can be installed on cut or uncut cables and are suitable for direct buried, aerial and underground installation. They are suitable for pressurized and nonpressurized cables. The Universal Closure UCN consists of two plastic end caps and a plastic closure tube. The two-section end caps incorporate the strain relief that absorbs the mechanical forces which may be applied to the cables. Three-piece end caps are available to accommodate a higher number of cables. Two metal bars interconnect the two end caps. On-site hand-drilling of the cable entries provides flexibility with regard to cable diameter, number and arrangement of the cables. During installation of the end caps, the strain-relief disks are automatically pressed by two aluminum collars onto the cables. The compression guarantees excellent resistance against push and pull. The longitudinally split closure tube is closed with two plastic bars. They are pushed on by a hammer and are secured with pins. Permanently elastic longitudinal and round sealings allow the closure to be opened and re-closed as often as required without the need of consumables. Each UCN is equipped with test valve and external grounding device. Special Features Large variety for all cable types, splice configurations and connectors Individual adaptation of the cable entries on site by drilling the end caps according to number of cables and their diameters Quick re-opening and re-closing of the closure tube without the need of special tools Re-usable closure sealings No outside metal parts mean no danger of corrosion Strain relief system integrated in the end caps UCN: Easy installation with clamping bars 16

Inline Closure UCN Kit Content, Installation 1 2 3 4 5 8 9 11 10 14 15 13 19 20 17 18 3 6 7 12 16 Kit Content Each closure package contains all parts required for the installation of a branch closure with up to 4 cables. The pre-cut sealing rings of the end caps with the joiner element allow installation of UCN closures on cut as well as on uncut cables respectively on rehabilitation of existing splices. 1 Closure tube 2 Splice protection 3 End caps 4 Connection bar 5 Sealing tape 6 Sealing rings (M-profile with joiner clips) 7 Longitudinal sealing 8 Installation instructions 9 Clamping bars 10 Lubricant 11 Gauge 12 Measuring tape 13 Brush 14 Sealing paste 15 Cable shield connection clips 16 Cleaning tissues 17 Cable sheath connection lead 18 Branching cable shield connection leads 19 Valve protection cap 20 Grounding screws Installation Detailed installation instructions are enclosed in each closure pack. Installation requires a "Tool Case for Installation of Universal Closures UCN" which has to be ordered separately (see page 26). 17

Inline Closure UCN Dimensions of Cable Entry Areas Two-section end cap (UCN) B S Two-section A B C S End Cap [mm] [mm] [mm] [mm] UCN 5-... 46 53 46 10 UCN 7-... 64 105 64 10 A C UCN 9-... 100 145 80 10 UCN 11-... 104 205 104 10 Oval end cap (UCN) A B S Oval A B S End Cap [mm] [mm] [mm] UCN 7-... 64 125 10 UCN 9-... 88 186 10 Three-section end cap (UCNT) A C S 1 B Three-section A B C D E S End Cap mm mm mm mm mm mm UCNT 9-... 66 44 105 52 24 10 UCNT 11-... 100 55 150 80 30 10 E D S 1 and 2 = Cutting level 18

Inline Closure UCN Capacities, Dimensions, Desiccant Closure Type Capacity in Pairs Capacity in Pairs Desiccant Modular-splice (25 Pairs) Single Splice, (to be or AMP-TEL-Splice or ordered AMP-Mini-PICABOND Splice Scotchlok Connector Splice separately) Conductor Diameter [mm] Conductor Diameter [mm] 0.4 0.5 0.6 0.9 0.4 0.5 0.6 0.9 [g] UCN 5-10 200 150 100 80 180 150 120 80 100 UCN 5-20 350 300 250 100 300 250 200 100 150 UCN 7-9 oval 700 600 500 250 600 500 400 200 150 UCN 7-10 800 700 600 300 700 600 500 250 150 UCN 7-15 1000 800 600 350 900 800 500 275 150 UCN 7-20 1200 800 600 400 1100 900 600 300 200 UCN 7-30 1800 1200 900 500 1600 1200 900 400 250 UCN 9-20 2400 2100 1200 600 2100 1900 1100 500 250 UCN 9-20 oval 2800 2500 1600 800 2500 2200 1600 650 350 UCN 9-24 2700 2400 1500 700 2400 2100 1500 600 300 UCN 9-28 3100 2700 1800 750 2700 2300 1700 700 350 UCN 9-30 3300 2800 2000 900 3000 2400 1800 800 350 UCN 11-20 3200 2700 1800 800 3000 2400 1500 700 400 UCN 11-30 4800 4000 2700 1000 4400 3000 2000 900 450 UCN 11-40 6000 5200 3200 1200 5600 4000 2700 1000 500 Note: The actual capacity also depends on the possible nominal diameters of the cables to be installed in the end caps. Closure Type Length [mm] Diameter [mm] Sheath Opening inside outside inside outside [mm] UCN 5-10 350 523 115 150 280 UCN 5-20 580 768 115 150 510 UCN 7-9 oval 292 469 144/190 153/222 220 UCN 7-10 350 523 168 204 280 UCN 7-15 470 665 168 204 400 UCN 7-20 580 768 168 204 510 UCN 7-30 830 1020 168 204 760 UCN 9-20 580 768 210 250 510 UCN 9-20 oval 580 768 230/252 240/292 510 UCN 9-24 690 881 210 250 610 UCN 9-28 778 952 210 250 710 UCN 9-30 830 1020 210 250 760 UCN 11-20 580 768 270 312 510 UCN 11-30 830 1020 270 312 760 UCN 11-40 1080 1274 270 312 1010 19

Inline Closure UCN Order Numbers Closures Closure Type Delivery Unit Order Number UCN 5-10 1 pc. S45754-A2-A1 UCN 5-20 1 pc. S45054-A304-A6 UCN 7-9 oval 1 pc. S45054-A303-A33 UCN 7-10 1 pc. S45054-A303-A21 UCN 7-15 1 pc. S45054-A303-A34 UCN 7-20 1 pc. S45054-A303-A22 UCN 7-30 1 pc. S45054-A303-A23 UCN 9-20 1 pc. S45054-A302-A19 UCN 9-20 oval 1 pc. S45054-A302-A61 UCN 9-24 1 pc. S45054-A302-A20 UCN 9-28 1 pc. S45754-A2-A2 UCN 9-30 1 pc. S45054-A302-A21 UCN 11-20 1 pc. S45054-A301-A19 UCN 11-30 1 pc. S45054-A301-A20 UCN 11-40 1 pc. S45054-A301-A21 All closures with 1 valve and 1 grounding device Spare Parts Designation Delivery Unit Order Number Two-section End Caps with valve, without sealing ring and aluminum collar UCN 5-... 1 pc. S45056-M134-A30 UCN 7-... 1 pc. S45056-M134-A32 UCN 7-... oval 1 pc. S45756-M1-A3 UCN 9-... 1 pc. S45056-M134-A34 UCN 9-... oval 1 pc. S45756-M1-A2 UCN 11-... 1 pc. S45056-M134-A36 Two-section End Caps with grounding device, without sealing ring and aluminum collars UCN 5-... 1 pc. S45056-M134-A31 UCN 7-... 1 pc. S45056-M134-A33 UCN 7-... oval 1 pc. S45756-M1-A5 UCN 9-... 1 pc. S45056-M134-A35 UCN 9-... oval 1 pc. S45756-M1-A4 UCN 11-... 1 pc. S45056-M134-A37 20

Inline Closure UCN Order Numbers Spare Parts and Accessories Designation Delivery Unit Order Number Three-section End Caps with grounding device, sealing ring and aluminum collar UCNT 9-... 1 pc. S45056-M134-A39 UCNT 11-... 1 pc. S45056-M134-A38 One-section End Cap without cable entries (By using one end cap without cable entries, the closure can be used as a canister closure) UCNF 9-... 1 pc. C45197-K18-B13 Aluminum Collars for end caps incl. bolts UCN 5-... 1 pc. S45056-M134-A60 UCN 7-... 1 pc. S45056-M134-A70 UCN 7-... for oval end caps 1 pc. S45756-M1-A10 UCN 9-... 1 pc. S45056-M134-A80 UCN 9-... for oval end caps 1 pc. S45756-M1-A11 UCN 11-... 1 pc. S45056-M134-A90 Sealing Rings for end caps (M-Profile with joiner clip) UCN 5-... 10 pcs. S45756-M1-A90 UCN 7-... also for oval end caps 10 pcs. S45756-M1-A91 UCN 9-... 10 pcs. S45756-M1-A92 UCN 9-... for oval end caps 10 pcs. S45756-M1-A93 UCN 11-... 10 pcs. S45756-M1-A94 Longitudinal Sealing for closure tubes UCN 5-10 5 pcs. S45756-M1-A80 UCN 7-9 5 pcs. S45756-M1-A13 UCN 7-10 5 pcs. S45056-M135-A80 UCN 7-15 5 pcs. S45756-M1-A14 UCN 5- / 7- / 9- / 11-20 5 pcs. S45056-M135-A90 UCN 9-24 5 pcs. S45056-M135-A100 UCN 9-28 5 pcs. S45756-M1-A15 UCN 7- / 9- / 11-30 5 pcs. S45056-M135-A110 UCN 11-40 5 pcs. S45056-M135-A120 Installation Material Sealing Paste, 20 g 10 pcs. S45056-M83-A10 Sealing Tape, 1 roll 5 pcs. S45056-M135-A132 Lubricant, 10 x 20 g, 5 brushes 1 set S45056-M135-A150 Desiccant, 50 g 1 pc. S45056-M130-A3 Cable Sheath Clip 10 pcs. S45056-M80-A3 Cable Sheath Connection Wire, 180 mm 10 pcs. S45056-M135-A140 Aerial Hanging Device 1 set S45754-D1-A1 21

Vault Cable Closure UCNV Description Design Universal vault cable closures are available in two variants: 1. Complete UCNV vault closures (3 different sizes) with all components necessary for installation in one closure package. 2. Individual distribution end caps (2 different sizes) to be combined with the well-known UCN universal closures. To produce the desired vault closure, a suitable UCN closure with a corresponding capacity has to be selected and one of the end caps included in the UCN closure package has to be replaced by the corresponding vault cable end cap. Application Universal vault closures UCNV serve to distribute outdoor trunk cables onto indoor distribution cables within exchanges. There, the vault closures can be installed in any position in cable vaults or other spaces. The size of the vault closure to be used depends on the number of distribution cables to be led out, as well as on the number of pairs and the conductor crosssection. For special requirements, RXS also offers a flameretardant closure of the type UCN FR. The material used complies with UL 94 V0. This version meets the requirements for flame-resistant closures to Bellcore TR-NWT-001058. The UCNV vault closures comprise a two-section plastic end cap for the trunk cable, an aluminum distribution end cap with the appropriate number of cable entries with rubber sealings for the distribution cables and the longitudinally split closure tube, as well as the necessary installation accessories. Unused cable entries are to be closed with dummy plugs. Adapter plugs are available to adapt the cable entries for smaller cable diameters. Special Features Designed as vault closure in non-pressurized cable networks One end cap suitable for accommodation of max. 20 distribution cables Strain relief for trunk cable is integrated in the end cap No corroding external metal parts No special tool required for opening or closing 22

Vault Cable Closure UCNV Kit Content, Installation Kit Content 18 2 1 3 4 6 7 8 9 11 12 15 13 14 16 17 5 10 1 Closure tube 2 Splice protection 3 Longitudinal sealing 4 Connecting bars 5 End cap for trunk cable 6 Grounding wire 7 Clamping bars 8 Sealing tape 9 Sealing paste 10 End cap for distribution cables 11 Sealing rings (M-profile with joiner clips) 12 Cable sheath clip 13 Gauge 14 Measuring tape 15 Cleaning tissues 16 Lubricant 17 Brush 18 Installation instructions Installation Detailed installation instructions are enclosed in each closure pack. Installation requires a "Tool Case for Installation of Universal Closures UCN" which has to be ordered separately (see page 26). 23

Vault Cable Closure UCNV Capacity, Dimensions, Order Numbers Number of Distribution Cables, Dimensions Closure Type Number of Length Diameter Sheath Distribution [mm] [mm] Opening Cables inside outside inside outside [mm] UCNV 7-15/10 10 470 665 168 204 400 UCNV 9-20/12 12 UCNV 9-20/20 20 580 768 209 247 510 Capacity in Pairs Capacity in Pairs Capacity in Pairs Modular Splice (25 pairs) Single Splice, Closure Type or AMP-TEL Splice or AMP-Mini PICABOND Splice 1 Scotchlok Connecting Splice 2 Conductor Diameter [mm] Conductor Diameter [mm] 0.4 0.5 0.6 0.9 0.4 0.5 0.6 0.9 UCNV 7-15/10 1.000 700 400 200 1.000 600 400 200 UCNV 9-20/12 UCNV 9-20/20 2.400 2.100 1.200 600 2.100 1.900 1.200 500 Note: The actual capacity also depends on the possible nominal diameters of the cables to be installed in the end caps. Cable Capacity / Diameter Closure Type Max. Diameter Max. Number of Distribution Cable Diameter of Main Cable Distribution Cables without Adapter Plug with Adapter Plug UCNV 7-15/10 up to 61 mm 10 25 to 33 mm 16 to 25 mm UCNV 9-20/12 up to 97 mm 12 25 to 33 mm 16 to 25 mm UCNV 9-20/20 up to 97 mm 20 16 to 25 mm - Order Numbers Closure Type Delivery Unit Order Number UCNV 7-15/10 1 pc. S45054-A303-A35 UCNV 9-20/12 1 pc. S45054-A302-A46 UCNV 9-20/20 1 pc. S45054-A302-A47 All closures with external grounding device 24

Vault Cable Closure UCNV Installation Material, Distribution End Caps Installation Material for Complete UCNV Closures Designation Delivery Unit Order Number Dummy Plugs 5 pcs. S45054-A107-R10 Adapter Plugs 5 pcs. S45054-A174-R10 Distribution End Caps The UCNV aluminum distribution end caps have 12, 18 and 30 elastically sealed cable entries, respectively. These entries are closed on delivery and can be opened to accommodate the relevant number of distribution cables. The UCNV end caps are supplied with a sealing ring and installation instructions, are installed instead of standard UCN end caps and are to be combined with the UCN closures listed in the table below. Distribution End Caps Type Max. No. of Distribution For Use with the Following Order Number Distribution Cables Cable Ø [mm] UCN Types (Order Number) UCNV 9-/12 12 25 to 33 UCN 9-20 (S45054-A302-A19) S45056-M134-A140 UCN 9-24 (S45054-A302-A20) UCNV 9-/18 18 15 to 27 UCN 9-30 (S45054-A302-A21) S45056-M134-A136 UCN 11-20 (S45054-A301-A19) UCNV 11-/30 30 15 to 27 UCN 11-30 (S45054-A301-A20) S45056-M134-A137 UCN 11-40 (S45054-A301-A21) 25

Tool Case for Installation of UCN Closures Equipped Tool Cases Application The tool case contains all standard tools and special tools (hand-driven drilling tool) which are neccessary for installation of the whole UCN closure family. Designation Dimensions [mm] Weight [kg] Order Number Tool Case for UCN closures 650 x 430 x 130 14 S45055-M119-A13 26

Tool Case for Installation of UCN Closures Tools Designation Application Order Number Tool Case, empty For attaching tools C46365-K1-A1 Tool Insert C45365-A4-C20 Lid Insert C45365-A4-C23 Drilling Tool For UCN end caps C45407-A62-A13 Spare Blade For drilling tool C45407-A62-C6 Installation Block For closing and re-opening UCN C45197-A127-B115 Cable Sheath Cutter For splitting plastic cable sheaths S45056-Z472-A3 Punch For punching holes in plastic sheaths for attaching sheath clips C45407-A62-A4 For mounting sheath clips, Socket Wrench connecting bars and grounding straps, 10 x 10 mm and for using the drilling tool S45056-Z426-A3 Socket Wrench 11 x 11 mm For grounding of UCN S45056-Z426-A24 Socket Wrench 13 x 13 mm For installation of UCN end caps S45056-Z426-A2 Wrench, 10 mm For mounting the sheath clips S45056-Z468-A29 Lubricant, 50 g For drilling tool S45057-Z901-H460 Scissors For cutting the sealing material S45056-Z405-A6 Pliers Removing of sealing band from UCN end caps S45057-Z301-H83 Allen Wrench, 4 mm For replacing blade of drilling tool S45056-Z445-A8 Holder As a support for drilling tools C45407-A62-C137 Test/Adjusting Instructions To test and adjust the drilling tool S45055-M119-P430 27

Inline Closure MHS P Description Design The MHS P comprises: Two half-shells made of black plastic One end cap providing the sealing and strain relief for one or two incoming cables One end cap providing the sealing and strain relief for up to four outgoing cables A set of silicon seals providing sealing of the closure Application The MHS P mechanical closure is used on all types of communication cables up to 3000 pairs. It provides protection for straight or branched cable connections. For both new installation and rehabilitation, it can be used on pressurized and non-pressurized cables. To insert the cables into the end caps, selected for the type of connection and cable, simply cut out the cable inlets using the specially designed punching pliers. The cables are sealed by applying sealing tapes to the end caps and around the cables. This sealing compound withstands pneumatic pressure and environmental stress. Strain relief is provided by a metal strip held around the cables by a metal collar. Silicon seals, fitted around the end caps and in a groove running along the half-shells, provide perfect sealing for the assembly. The half-shells are closed using non-corrosive screws. The valve is prefitted in the upper half-shell and the ground connection can be installed, on request, on the lower half-shell. Features Complies to the strong requirements of specifications for pressurized closures Full closure range for cables up to 3000 pairs Conforms to all splice configurations Easy and rapid access to the splice for repair and service No use of resin No use of outside energy, e.g. flame or electricity Flash test at 750 mbar / 15 minutes 28

Inline Closure MHS P Kit Content, Tool Case Kit Content 1 3 5 4 10 2 6 7 8 9 13 11 12 14 15 19 16 17 18 22 21 25 26 23 20 24 1 Upper half-shell 2 Lower half-shell 3 End cap for outgoing cables 4 Clamping bands 5 End cap closing bands 6 Metal strips 7 Marker letters 8 Grapple 9 Circular seal 10 Marker tape 4 x 62 (for MHS P no 6 or no 7) 11 Gloves 12 Paint brush 13 Longitudinal seals 14 Closing gauge 15 Cap closing screws (5 x 35) 16 Roll of sealing tape 17 Cleaning tissue 18 Tube of sealant 19 Marker tape 20 Sachet of grease 21 Holding band 22 End cap closing screw 23 Grapple 24 Circular seal 25 End cap for incoming cables 26 Clamping band 27 Installation instructions (not shown) Tool Case Tool 29

Inline Closure MHS P Dimensions, End Caps, Cable Entries Dimensions Closure Type Length [mm] Diameter [mm] Inside Outside Inside Outside MHS P 4 466 666 135 x 120 195 x 150 MHS P 5 608 808 135 x 120 195 x 150 MHS P 6 680 880 200 x 160 265 x 200 MHS P 7 1030 1230 200 x 160 265 x 200 A B A C B D End Cap 1/2 End Cap 3/4 End Caps, Cable Entries End Cap 1/2 End Cap 3/4 Type max. cable Ø Dimensions max. cable Ø Dimensions [mm] [mm] [mm] [mm] A B A B C D MHS P 4 46 34 135 x 120 36 26 26 36 135 x 120 MHS P 5 46 34 135 x 120 36 26 26 36 135 x 120 MHS P 6 69 59 200 x 160 62 62 62 62 200 x 160 MHS P 7 69 59 200 x 160 62 62 62 62 200 x 160 30

Inline Closure MHS P Order Numbers Designation MHS P 4-1/2 branched MHS P 4-3/4 branched MHS P 5-1/2 branched MHS P 5-3/4 branched MHS P 6-1/2 branched MHS P 6-3/4 branched MHS P 7-1/2 branched MHS P 7-3/4 branched Accessories Grounding Device Re-entry kit MHS P 4 & 5 1/2 Re-entry kit MHS P 4 & 5 3/4 Re-entry kit MHS P 6 & 7 1/2 Re-entry kit MHS P 6 & 7 3/4 Tool Case for MHS P Order Number S45254-A21-A3 S45254-A21-A4 S45254-A22-A3 S45254-A22-A4 S45254-A23-A3 S45254-A23-A4 S45254-A24-A3 S45254-A24-A4 S45254-M2-R5 S45254-A25-A5 S45254-A25-A6 S45254-A25-A7 S45254-A25-A8 S45254-M4-A2 31

Inline Closure UCA Description, Kit Content Design The UCA is designed as a half shell closure with resilient silicone gasket. The half shells, with a hinge molded on one long side, are closed with stainless steel clips. The clips can be closed by hand and levered open again with a screwdriver. To impede unauthorized access to the splice compartment, an anti-access device is available as an accessory. Application The UCA closures are designed to protect splices at straight and branch joints on communication cables in unpressurized secondary networks. The closure can be assembled on all common copper cable types. It is suitable for cut and uncut cables and can be directly buried in the ground or installed in manholes and on aerial cable routes between and on poles as well as on walls. Special Features Very fast access to the splice by use of clamps, without influencing the cable entry areas Four pre-fabricated cable entries Half shell closure with resilient sealing of the half shells permits unlimited re-entry of the closure Shells closed with clips that are closed manually and merely require a screwdriver to re-open Installation without special tools The cable entries are sealed with the proven sealing tape which is pressed by wedges against the bottom shell. Unused cable entries are sealed with dummy plugs. All mechanical stresses from outside on the cables are absorbed by strain-relief elements which are latched into the bottom shell. The electrical interconnections of the cable sheaths are also connected on these strainrelief elements. If required, the closure can be supplied with external grounding device. For tightness testing the closure can be flash-tested with up to 150 kpa / 15 min. air pressure, using a valve inserted in the top shell. After the test the valve is replaced by a sealing screw. Kit Content Each closure package contains all the parts required for one straight joint. 5 1 2 3 4 6 7 8 12 11 9 1 Half shells with clamps 2 Cable strain reliefs incl. cable shield connections 3 Sealing wedges 4 Sealing tape 5 Half shell gasket 6 Cleaning cloth 7 Screws for sealing wedges 8 Dummy plugs 9 Wrap gauge 10 Grounding screws (not shown) 11 Shield connection leads 12 Installation instructions 32

Inline Closure UCA Dimensions, Capacities, Order Numbers, Accessories Dimensions, Capacities Type Dimensions [mm] Weight Cable Capacities in Pairs for Outer Inner Outer Outer [kg] Diameter Conductor Diameters Length Length Width Height [mm] 0.4 mm 0.6 mm 0.8 mm each closure UCA 3-6 308 150 124 88 2.0 70 30 20 end 2 x to 18 UCA 4-9 378 220 160 118 2.8 The stated splice capacities are obtained from the mean pair counts of the largest cables that can be inserted in each entry. each closure end 2 x to 28 200 100 50 When selecting the size of the closure, one should always take into account the number of splices and the out-side diameters of the cables to be installed. Order Numbers Designation Delivery Unit Order Number UCA 3-6 with external grounding device 1 pc. S45754-A3-A13 UCA 3-6 1 pc. S45754-A3-A12 UCA 4-9 with external grounding device 1 pc. S45754-A3-B14 UCA 4-9 1 pc. S45754-A3-B15 Accessories Designation Delivery Unit Order Number Cable Branch-off Set for 10 branch cables incl. strain relief and shield connection - for UCA 3-6 1 set S45756-M7-A4 - for UCA 4-9 1 set S45756-M7-A1 Anti-Access Device - for UCA 3-6 1 set S45756-M3-A3 - for UCA 4-9 1 set S45756-M3-A2 Wall / Pole Mounting for UCA 3-6 and 4-9 1 set S45756-M5-A2 Aerial Hanging Device for UCA 3-6 and 4-9 1 set S45756-M5-A1 Desiccant 30 g 1 pc. S45056-M130-A2 System for Tightness Testing (valve, sealing plug, sealing paste) 10 sets S45756-M5-A7 Accessories for Encapsulating the Splice Designation Delivery Unit Order Number Drilling Tool 1 pc. S45407-A63-A1 Filling Compound (re-enterable) 500 g S45057-Z102-H10 Sealing Plug 1 pc. S45407-A62-A6 33

Inline Closure MHS M Description Design The lower half shell of the MHS M accommodates the cable splice. The upper half shell covers the splice area. At the ends of the shells two closing parts are used for covering the cable entry areas. In case of reopening only the upper half shell has to be removed whereas the cable entry areas remain unchanged. Sealing of incoming and outgoing cables is achieved using sealing tapes and one or two twists of tapes around the cable. The seams between the half shells and the closing parts are made watertight with sealing tapes, too. Application Straight and branching closure for non-pressurized copper cable networks with up to 4 cable entries per closure side. Application area: in manholes, in the ground, on poles and on aerial cables. Strain-relief elements prevent push in or pull out of the cables. These elements are placed beside the sealing elements and can be cut according to the cable diameters on site. The two half shells and the two closing parts are very tightly joined by non-corroding screws. Features Reliable sealing of the closure due to age-resistant, plastically sealing tapes Strain relief elements in the cable entry areas easily adapted to the cable diameters (onion ring system) External metal parts made of non-corroding material Quick and easy installation without the need for special tools or additional power source 34

Inline Closure MHS M Kit Content, Application, Order Numbers 14 13 3 1 3 2 4 5 6 12 11 10 9 8 7 Kit Content 1 Upper half shell 2 Lower half shell 3 Closing part 4 Sealing and strain-relief elements 5 Sealing tapes round 6 Sealing tapes flat 7 Shield connection lead 8 Knife 9 Cleaning tissues 10 Closing screws 11 Branching kit (only for branching closure) 12 Measuring tape 13 Transparent film 14 Installation instructions Types, Application, Order Numbers Closure Type Application Cable Entries Cable Outlets Order Number MHS M 1 Straight closure 1 1 S45254-A30-A5 Branching closure* 1 2 S45254-A30-A6 Straight closure 1 1 S45254-A31-A7 MHS M 2 Branching closure* 1 2 S45254-A31-A8 Branching closure* 1 3-4 S45254-A31-A9 Straight closure 1 1 S45254-A32-A7 MHS M 3 Branching closure* 1 2 S45254-A32-A8 Branching closure* 1 3-4 S45254-A32-A9 * In addition to these standard branching closures it is also possible to configure branching closures with 2 or 3-4 cable entries. This requires the use of suitable sealing and strain-relief elements from the range of accessories and additional branching kits. The MHS M 1 permits a maximum of 2 cable entries. Branching Kit The standard branching closures contain branching kits for the cables to be branched. Each additional branching cable requires a further branching kit that has to be ordered separately. Contents: 1 bridging clip, 1 shield connection lead Designation Branching Kit Order Number S45755-M2-A2 35

Inline Closure MHS M Dimensions, Capacities Dimensions of Closure Case, Sheath Opening Closure Type Length [mm] Diameter [mm] Max. Sheath Opening [mm] Inside Outside Inside Outside MHS M 1 265 360 39 56 225 MHS M 2 480 630 61 78 400 MHS M 3 480 630 81 105 400 Cable Entries: Number per Closure Side and Dimensions Closure Type Maximum Cable Diameter [mm] 1 Cable Entry 2 Cable Entries 3-4 Cable Entries MHS M 1 23 13 - MHS M 2 29 22 19 MHS M 3 40 31 29 Maximum Capacity / Pairs Closure Type Conductor Diameter Butt Connector* Inline Connector** Modular Connector 25 Pair [mm] [pairs] [pairs] [pairs] MHS M 1 0.4 30 50-0.5-0.6 30 50-0.8-0.9 20 - - MHS M 2 0.4 200 250 300 0.5-0.6 150 250 200 0.8-0.9 100-150 MHS M 3 0.4 300 400 600 0.5-0.6 300 300 400 0.8-0.9 150-250 *) e.g. 3M UY2 **) e.g. AMP Picabond 36

Inline Closure MHS M Accessories Sealing and Strain-Relief Elements For Type Cable Order Number Entries MHS M 1 1 S45254-A1-R1 2 S45254-A1-R3 1 S45254-A2-R1 MHS M 2 2 S45254-A2-R11 3-4 S45254-A2-R16 1 S45254-A3-R1 MHS M 3 2 S45254-A3-R11 3-4 S45254-A3-R15 Tool Case Tools for installation of MHS M. Contents: 1 opening plate, 1 pliers, 1 ratchet wrench, 1 extension, 3 sockets, 1 crank, 1 scissors, 1 white marking pen. Designation Tool Case Order Number S45254-M2-A4 37

Inline Closure MHS M Accessories Opening Plate Tool for re-opening the MHS M. Designation Opening Plate Order Number S45254-A4-R12 Reclosure Set For reclosing opened closures. Contents: 1 set of sealing tapes (10 strips), 1 installation instruction. Designation Reclosure Set Order Number S45254-A4-R19 Pressure Test Set Set for short-duration tightness testing. Contents: 1 screwdriver with thread, 4 valves, 4 sealing rings. Designation Pressure Test Set Order Number S45254-A4-R1 38

Inline Closure MHS M Accessories Fixing Device For mounting the MHS M on walls or poles and for suspending from the messenger wires of aerial cables. Designation Fixing Device Order Number S45254-A4-R15 Grounding Device For external grounding. Designation Grounding Device (pack of 5) Order Number S45254-A4-R22 39

Distribution Closure BPR Description Design The housing of the BPR consists of 4 parts: lower half shell, two upper closing parts and one upper half shell. The lower half shell is equipped with 2 cable glands each on both sides for insertion of max. 4 subscriber cables. Glands not used are closed by means of dummy plugs which are part of the kit. Application Closure for non-pressurized cable networks, especially designed as a distribution closure for up to 10 subscriber cables, but also useable as in-line closures for low-paired distribution cables with up to 30 pairs. Use: in manholes, in buildings, in the ground, on poles and on aerial cables. Special Features Reliable solution for distribution of subscriber cables instead of terminals or boxes Insertion and sealing of subscriber cables by using cable glands Later insertion of subscriber cables possible at any time without influencing the cables already installed 8 cable gland versions available for all common subscriber cable types Sealing of the low-paired distribution cables by age-resistant sealing tapes No special tools required Closing screws made of non-corroding metal Each of the two upper closing parts is designed for accommodation of 3 cable glands. That means in connection with the 4 cable glands of the lower half shell 10 cable glands in total for the distribution of subscriber cables. These 10 glands are pre-installed with gland sealing parts 5.2 mm for cable diameter 4-6 mm. Gland sealings for other cable diameters or configurations are available. Sealing of the low-paired distribution cables is achieved using sealing parts in combination with sealing tapes placed in the lower half shell and in the two upper closing parts. In addition one or two twists of sealing tape around the cables ensure a reliable sealing of the cable entry area. An upper half shell is used to cover the closure. In case of re-opening only this half shell has to be removed. The cable entry areas are not influenced. The seams between the half shells and the closing parts are sealed with a special sealing element. All the parts of the BPR housing are tightened with non-corroding screws. As accessory a metal tray is available which can be installed on the bottom of the lower half shell. This tray is suitable to hold IDC connection strips or other devices. 40

Distribution Closure BPR Kit Content 3 1 3 15 6 7 2 8 14 11 9 4 13 12 10 5 Kit Content 1 Cover 2 Lower half shell with 4 cable glands (2 on each side) 3 Closing parts including 3 cable glands each 4 Sealing and strain-relief parts for multi-pair cables 5 Strain-relief elements for subscriber cables 6 Sealing element 7 Sealing tapes 8 Dummy plug 9 Knife 10 Cleaning tissues 11 Closing screws 12 Wrench 13 Measuring tapes 14 Transparent film 15 Installation instructions 41

Distribution Closure BPR Dimensions, Application, Order Numbers Dimensions Inner Dimensions [mm] Outer Dimensions [mm] Length Width Height Length Width Height 173 80 63 328 117,5 68 Application, Order Numbers Closure Type Application, Max. Cable Ø Order Number 1 Branching cable 10 Subscriber Cables* ) BPR 23 mm 14 mm S45254-A5-A6 *) For subscriber cables 8 gland sealings for the following cable diameters are available: Cable Ø Order Number 4-5 mm S45254-A6-R13 4-6 mm S45254-A6-R2 6-8 mm S45254-A6-R3 8-10 mm S45254-A6-R4 10-12 mm S45254-A6-R5 12-14 mm S45254-A6-R6 Two-wire cables S45254-A6-R7 Three-wire cables S45254-A6-R9 With the standard closure 10 gland sealings for cable diameters of 4-5 mm are delivered. 42

Distribution Closure BPR Accessories Wall Mounting Brackets Support For mounting the BPR on walls. Mounting Brackets Designation Wall Mounting Brackets No. 1 Support Order Number S45254-L20-A1 S45254-L20-A9 Messenger Strand Suspension For suspending the BPR from the messenger wires of aerial cables. Contents: Set with 2 mounting sets. Designation Messenger Strand Suspension Order Number S45254-A6-R10 Pressure Test Set Set for short-duration tightness testing. Contents: 1 screwdriver with thread, 4 valves, 4 sealing rings. Designation Pressure Test Set Order Number S45254-A4-R1 Metal Tray For fixing IDC connection strip or other devices. Designation Metal Tray Order Number S45254-A6-R14 43

Aerial Closure PEV Description Design The closure consists of two end caps and a closure tube. The end caps are split in two sections to take uncut cables. The cable entries are designed as ringshaped segments, like onion rings. They can easily be removed with a knife which is part of the kit. Each end cap has two cable entries. Sealing tape wrapped around the cables prevents ingress of water. Two plastic connection bars link the two end caps together. Application The free-breathing PEV closure is designed as a straight or branching closure on aerial cables. For use on cut and uncut cables. Mechanical forces from the cables are absorbed by serrated plastic parts which are connected with the end caps. These parts are pressed onto the cable sheaths by non-corroding metal hose clamps. The free-breathing split closure tube is closed by simply latching into position. The closure is fastened to the messenger wire by mounting devices. Features The PEV closure guarantees an excellent protection against climatic influences in tropical countries. The ventilation principle prevents humidity concentration, independent of air humidity and temperature changes. Cable entries individually adaptable on site Quick re-opening and re-closing without additional material For use on cut and uncut cables 44

Aerial Closure PEV Kit Content, Dimensions, Order Number 1 1 2 3 4 6 5 7 8 9 10 2 3 Kit Content 1 Closure tube 2 End caps 3 Hose clamps 4 Sealing tapes 5 Measuring tape 6 Cleaning tissues 7 Knife 8 Screws 9 Serrated parts for strain relief 10 Connecting bars Mounting Device 1 Messenger wire clamps 2 Screws 3 Cable ties Dimensions, Order Number Type Dimensions [mm] Delivery Order Number Length Max. Ø Unit PEV 560 155 2 kits S45254-A20-A1 45

Temporary Splice Protection Closures MEP Application The MEP closure is mainly used for temporary applications if cable splices have to be made only for a short time e.g. on construction sites, fair grounds or for cable repairs. They are also used if splices have to be sealed up to the final installation e.g. as overnight closure or under bad weather or environmental conditions. The use of MEP should not exceed 2 weeks in a manhole liable to flooding. Design Two half shells serve as splice housing. At the ends these half shells are filled with gel which forms a watertight seal around the incoming and outgoing cables. Additionally a gel sealing tape is wrapped around the cable to improve the sealing effect. The seams between the closure halves are also sealed by gel which is filled in grooves along the sides of the half shells. 1 To close the MEP the half shells are pressed together until they are latched. The MEP is fixed on the cables with cable ties. 2 Kit Content 3 1 Half shells 2 Gel sealing tape (one for MEP 1, two for MEP 2) 3 Cable ties Dimensions Type Usable Inner Length Total Outer Length Inner Diameter Outer Diameter [mm] [mm] [mm] [mm] MEP 1 277 368 40 44 MEP 2 490 610 77 83 Cable Diameters, Order Numbers Typ max. Cable Diameter Capacity Order Number [mm] [pairs] MEP 1 20 14 S45254-A15-A1 MEP 2 32 112 S45254-A16-A1 46

Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Description Design The reinforced closures have been developed to meet increased demands in cable networks. For this purpose, a PE net has been integrated in the heat-shrinkable sleeve. This considerably increases the split resistance during shrinking and its mechanical strength. The inner side of the sleeve is coated with hot-melt adhesive which guarantees a watertight and secure bonding to plastic and metal-sheathed cables. A temperature-sensitive paint on the sleeve indicates that sufficient heat has been applied to the sleeve. The closure kit consists of the heat-shrinkable reinforced sleeve with closing channel, a protective liner or a canister, a shield connection lead and installation accessories. Application GSC For non-pressurized cable networks - with flexible protective liner. Accessories for Branching Closures Branching kit in three different sizes which is required for each branching cable. GSC C For non-pressurized cable networks - with metal canister as protection for increased mechanical strength. GSC CP For pressurized cable networks - with metal canister and test valve. Special Features High split resistance due to integrated PE net Environmentally friendly sleeve composition out of PE laminate and PE net No ingress of water into the homogeneous composite material Very high mechanical strength of sleeve composite No cable strangulation due to regulated shrink force of the sleeve No overheating of cable conductors due to reduced heat during the shrinking process Insensitive to sharp flame settings 47

Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Kit Contents Kit Content GSC 6 1 2 5 12 11 3 4 7 10 8 9 2 1 Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Cardboard liner 5 Laminated aluminum foil 6 Emery strip 7 Shield connection lead 8 Plastic adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Kit Content GSC C 1 2 5 12 3 6 11 10 7 4 9 2 8 1 Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister 5 Emery strip 6 Shield connection lead 7 Plastic adhesive tape 8 Aluminum adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Kit Content GSC CP 1 2 3 2 4 5 9 7 6 8 12 10 11 1 Reinforced heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister with test valve 5 Nut and cover screw for valve 6 Aluminum adhesive tape 7 Plastic adhesive tape 8 Shield connection lead 9 Emery strip 10 Flame protection foil 11 Cleaning tissue 12 Installation instructions 48

Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Branching Kit, Dimensions, Order Numbers 1 Branching Kit One branching kit is required per branching cable. The kits are to be ordered separately. 2 3 Content 1 Branching clamp 2 Bridging clip 3 Shield connection lead Branching Kit Type For Closure Type Order Number A (small) S46896-A1-R33 GSC, GSC C B (medium) S46896-A1-R34 (for non-pressurized cables) C (large) S46896-A1-R35 BP (medium) GSC CP S46896-A1-R42 CP (large) (for pressurized cables) S46896-A1-R43 Dimensions and Order Numbers of Closures Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] GSC 43/8-150 43 8 150 A S46896-A1000-A1 43/8-300 43 8 300 A S46896-A1000-A30 55/12-150 55 12 150 A S46896-A1005-A14 55/12-300 55 12 300 A S46896-A1005-A1 75/15-250 75 15 250 A S46896-A1006-A1 75/15-300 75 15 300 A S46986-A1006-A2 75/15-430 75 15 430 A S46896-A1006-A3 93/25-250 93 25 250 B S46896-A1012-A1 93/25-430 93 25 430 B S46896-A1012-A2 93/25-530 93 25 530 B S46896-A1012-A3 120/28-250 120 28 250 B S46896-A1016-A1 120/28-430 120 28 430 B S46896-A1016-A2 120/28-530 120 28 530 B S46896-A1016-A3 137/38-430 137 38 430 C S46898-A1018-A1 137/38-530 137 38 530 C S46896-A1018-A2 For GSC C and GSC CP, see next page 49

Reinforced Heat-shrinkable Closures GSC, GSC C, GSC CP Dimensions, Order Numbers Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] GSC C 43/8-200 43 8 200 A S46896-A1000-A3 43/8-350 43 8 350 A S46896-A1000-A4 43/8-500 43 8 500 A S46896-A1000-A31 75/15-300 75 15 300 A S46896-A1006-A4 75/15-350 75 15 350 A S46896-A1006-A5 75/15-500 75 15 500 A S46896-A1006-A6 75/15-650 75 15 650 A S46896-A1006-A38 93/25-300 93 25 300 B S46896-A1012-A4 93/25-500 93 25 500 B S46896-A1012-A5 93/25-600 93 25 600 B S46896-A1012-A6 120/28-400 120 28 400 B S46896-A1016-A4 120/28-500 120 28 500 B S46896-A1016-A5 120/28-600 120 28 600 B S46896-A1016-A6 160/45-500 160 45 500 C S46896-A1027-A1 160/45-700 160 45 700 C S46896-A1027-A2 200/55-500 200 55 500 C S46896-A1031-A1 200/55-700 200 55 700 C S46896-A1031-A2 GSC CP 62/15-300 62 15 300 BP S46896-A2006-A1 62/15-350 62 15 350 BP S46896-A2006-A2 62/15-500 62 15 500 BP S46896-A2006-A3 62/15-650 62 15 650 BP S46896-A2006-A9 93/30-300 93 30 300 BP S46896-A2011-A1 93/30-500 93 30 500 BP S46896-A2011-A2 93/30-600 93 30 600 BP S46896-A2011-A3 120/35-400 120 35 400 BP S46896-A2016-A1 120/35-500 120 35 500 BP S46896-A2016-A2 120/35-600 120 35 600 BP S46896-A2016-A3 120/35-900 120 35 900 BP S46896-A2016-A9 160/55-500 160 55 500 CP S46896-A2026-A1 160/55-700 160 55 700 CP S46896-A2026-A2 160/55-900 160 55 900 CP S46896-A2026-A9 200/65-500 200 65 500 CP S46896-A2031-A1 200/65-700 200 65 700 CP S46896-A2031-A2 200/65-900 200 65 900 CP S46896-A2031-A5 50

Reinforced Heat-shrinkable Closure GSC Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] 0.4 10-30 10-30 10-30 - - - 43/8-150 0.5-0.6 10 10-30 10-30 - - - 0.8-0.9 10-10 - - - 0.4-10-50 10-50 - - - 43/8-300 0.5-0.6 10-30 10-50 10-30 - - - 0.8-0.9 10-20 - 10-20 - - - 0.4 30-75 30-100 30-75 30-100 30-100 - 55/12-300 0.5-0.6 20-50 20-100 20-50 20-50 - - 0.8-0.9 10-50 - 10-30 - - - 0.4 50-100 50-150 50-100 50-200 50-250 50-150 75/15-250 0.5-0.6 50-75 50-150 50-75 50-150 50-150 50-100 0.8-0.9 10-50 - 10-50 10-50 10-100 - 0.4 50-200 50-250 50-150 - - - 75/15-300 0.5-0.6 50-100 50-250 50-100 - - - 0.8-0.9 10-100 - 10-75 - - - 0.4 50-250 50-300 50-200 50-300 50-400 50-250 75/15-430 0.5-0.6 50-150 50-300 50-150 50-200 50-250 50-200 0.8-0.9 10-100 - 10-75 10-100 10-150 10-100 0.4 200-250 200-300 200 200-300 200-300 200-250 93/25-250 0.5-0.6 150 150-300 150 150-200 150-250 150-200 0.8-0.9 30-150 - 30-100 30-150 30-200 30-150 0.4 200-400 200-500 200-400 200-600 200-600 200-500 93/25-430 0.5-0.6 150-300 150-500 150-250 150-400 150-500 150-400 0.8-0.9 30-250 - 30-150 30-250 30-300 30-250 0.4 200-400 200-500 200-400 - - - 93/25-530 0.5-0.6 150-300 150-500 150-250 - - - 0.8-0.9 30-250 - 30-150 - - - 0.4 250-400 250-500 250-300 250-600 250-600 250-500 120/28-250 0.5-0.6 200-250 200-500 200-250 200-300 200-500 200-400 0.8-0.9 50-250 - 50-200 50-300 50-300 50-300 0.4 250-600 250-900 250-500 250-500 250-900 250-800 120/28-430 0.5-0.6 200-400 200-900 200-400 200-600 200-800 200-600 0.8-0.9 50-300 - 50-300 50-400 50-500 50-400 0.4 250-600 250-900 250-600 - - - 120/28-530 0.5-0.6 200-500 200-900 200-500 - - - 0.8-0.9 50-300 - 50-300 - - - 0.4 400-800 400-900 400-600 400-1000 400-1000 400-900 137/38-430 0.5-0.6 300-600 300-900 300-500 300-600 300-800 300-600 0.8-0.9 100-300 - 100-300 100-400 100-500 100-400 0.4 400-800 400-900 400-600 400-1000 400-1000 400-900 137/38-530 0.5-0.6 300-600 300-900 300-500 300-600 300-800 300-600 0.8-0.9 100-300 - 100-300 100-400 100-500 100-400 51

Reinforced Heat-shrinkable Closure GSC C Capacities in Pairs Single Connectors 52 Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] 0.4 10-30 10-50 10-50 - - - 43/8-200 0.5-0.6 10-30 10-30 10-30 - - - 0.8-0.9 10-20 - 10-20 - - - 0.4 10-50 10-75 10-75 - - - 43/8-350 0.5-0.6 10-30 10-75 10-30 - - - 0.8-0.9 10-30 - 10-30 - - - 0.4 100 150 50-100 75-200 75-250 75-150 75/15-300 0.5-0.6 75 75-150 50-75 50-100 50-150 50-100 0.8-0.8 10-50 - 10-50 30-100 30-100 - 0.4 75-200 75-250 75-150 - - - 75/15-350 0.5-0.6 50-150 50-250 50-100 - - - 0.8-0.9 30-100 - 30-75 - - - 0.4 75-250 75-300 75-200 75-300 75-400 75-250 75/15-500 0.5-0.6 50-150 50-300 50-150 50-200 50-200 50-200 0.8-0.9 30-100 - 30-100 30-100 30-150 30-100 0.4 200-250 200-300 200 200-300 200-300 200-250 93/25-300 0.5-0.6 150-200 150-300 150 150-200 150-250 150-200 0.8-0.9 50-150 - 50-100 50-150 50-200 50-150 0.4 200-400 200-500 200-400 200-600 200-600 200-500 93/25-500 0.5-0.6 150-300 150-500 150-250 150-400 150-500 150-400 0.8-0.9 50-250 - 50-150 50-250 50-300 50-250 0.4 200-400 200-500 200-400 - - - 93/25-600 0.5-0.6 150-300 150-500 150-250 - - - 0.8-0.9 50-250 - 50-150 - - - 0.4 300-500 300-600 300-400 300-600 300-600 300-500 120/28-400 0.5-0.6 200-400 200-600 200-300 200-300 200-500 200-400 0.8-0.9 50-250 - 50-250 50-300 50-300 50-300 0.4 300-600 300-900 300-500 300-900 300-900 300-800 120/28-500 0.5-0.6 200-400 200-900 200-400 200-600 200-800 200-600 0.8-0.9 50-300 - 50-300 50-400 50-500 50-400 0.4 300-800 300-900 300-600 - - - 120/28-600 0.5-0.6 200-500 200-900 200-600 - - - 0.8-0.9 50-300 - 50-300 - - - 0.4 800-1000 800-1200 800-900 800-1600 800-1800 800-1200 160/45-500 0.5-0.6 400-900 400-1200 400-800 400-1000 400-1200 400-900 0.8-0.9 200-500 - 200-500 200-600 200-800 200-500 0.4 800-1200 800-800-1000 800-1800 800-2000 800-1800 160/45-700 0.5-0.6 400-1000 - 400-900 400-1200 - 400-1200 0.8-0.9 200-600 - 200-600 200-800 - 200-800 0.4 1200-1800 1200-1200-1800 1200-2400 1200-2400 1200-2400 200/55-500 0.5-0.6 1200-800-1200 800-1200 - 800-1200 0.8-0.9 250-800 - 250-800 250-800 - 250-800 0.4 1200-2400 1200-1200-2400 - - - 200/55-700 0.5-0.6 1200 - - - - - 0.8-0.9 250-800 - - - - -

Reinforced Heat-shrinkable Closure GSC CP Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] 0.4 100 150 50-100 75-200 75-250 75-150 62/15-300 0.5-0.6 75 75-150 50-75 50-100 50-150 50-100 0.8-0.9 10-50 - 10-50 30-100 30-100 - 0.4 75-200 75-250 75-150 - - - 62/15-350 0.5-0.6 50-150 50-250 50-100 - - - 0.8-0.9 30-100 - 30-75 - - - 0.4 75-250 75-300 75-200 75-300 75-400 75-250 62/15-500 0.5-0.6 50-150 50-300 50-150 50-200 50-200 50-200 0.8-0.9 30-100 - 30-100 30-100 30-150 30-100 0.4 200-250 200-300 200 200-300 200-300 200-250 93/30-300 0.5-0.6 150-200 150-300 150 150-200 150-250 150-200 0.8-0.9 50-150 - 50-100 50-150 50-200 50-150 0.4 200-400 200-500 200-400 200-600 200-600 200-500 93/30-500 0.5-0.6 150-300 150-500 150-250 150-400 150-500 150-400 0.8-0.9 50-250 - 50-150 50-250 50-300 50-250 0.4 200-400 200-500 200-400 - - - 93/30-600 0.5-0.6 150-300 150-500 150-250 - - - 0.8-0.9 50-250 - 50-100 - - - 0.4 300-500 300-600 300-400 300-600 300-600 300-500 120/35-400 0.5-0.6 200-400 200-600 200-300 200-300 200-500 200-400 0.8-0.9 50-250 - 50-250 50-300 50-300 50-300 0.4 300-600 300-900 300-500 300-500 300-900 300-800 120/35-500 0.5-0.6 200-400 200-900 200-400 200-600 200-800 200-600 0.8-0.9 50-300 - 50-300 50-400 50-500 50-400 0.4 300-800 300-900 300-600 - - - 120/35-600 0.5-0.6 200-500 200-900 200-600 - - - 0.8-0.9 50-300 - 50-300 - - - 0.4 800-1000 800-1200 800-900 800-1600 800-1800 800-1200 160/55-500 0.5-0.6 400-900 400-1200 400-800 400-1000 400-1200 400-900 0.8-0.9 200-500 - 200-500 200-600 200-800 200-500 0.4 800-1200 800-800-1000 800-1800 800-2000 800-1800 160/55-700 0.5-0.6 400-1000 - 400-900 400-1200 - 400-1200 0.8-0.9 200-600 - 200-600 200-800 - 200-800 0.4 1200-1800 1200-1200-1800 1200-2400 1200-2400 1200-2400 200/65-500 0.5-0.6 1200-800-1200 800-1200 - 800-1200 0.8-0.9 250-800 - 250-800 250-800 - 250-800 0.4 1200-2400 1200-1200-2400 - - - 200/65-700 0.5-0.6 1200 - - - - - 0.8-0.9 250-800 - - - - - 53

Standard Heat-shrinkable Closures SCX, SCX C Description Design In contrast to the closure series GSC the sleeves of the closures SCX and SCX C are not reinforced. The sleeve of these closures is made of one PE layer. The inner side of the sleeve is coated with hotmelt adhesive which guarantees a watertight and secure bonding to plastic and metal-sheathed cables. A temperature-sensitive paint on the sleeve indicates that sufficient heat has been applied to the sleeve. The closure kit consists of the heat-shrinkable sleeve with closing channel, a protective liner or a canister, a shield connection lead and installation accessories. Accessories for Branching Closures Application Branching kit in three different sizes which is required with branching closures for each branching cable. SCX For non-pressurized cable networks - with flexible protection liner. SCX C For non-pressurized cable networks - with metal canister as protection for increased mechanical strength. 54

Standard Heat-shrinkable Closures SCX, SCX C Kit Contents, Branching Kit 6 2 5 12 11 3 4 7 10 8 9 1 2 Kit Content SCX 1 Heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Cardboard liner 5 Laminated aluminum foil 6 Emery strip 7 Shield connection lead 8 Plastic adhesive tape 9 Flame protection foil 10 Cleaning tissue 11 Desiccant (silica gel) 12 Installation instructions Closure Content SCX C 5 2 12 3 6 11 10 7 4 9 1 2 8 1 Heat-shrinkable sleeve 2 Closing channel(s) 3 Retention clip 4 Metal canister 5 Emery strip 6 Shield continuity assembly 7 Adhesive tape 8 Aluminum adhesive tape 9 Flame protection foil 10 Cleaning cloth 11 Desiccant 12 Installation instructions 1 Branching Kit One branching kit is required per branching cable. The kits are to be ordered separately. 2 3 Content 1 Branching clamp 2 Bridging clip 3 Shield connection lead Branching Kit Type A (small) B (medium) C (large) Order Number S46896-A1-R33 S46896-A1-R34 S46896-A1-R35 55

Standard Heat-shrinkable Closures SCX, SCX C Dimensions, Order Numbers Type Diameter over Cable Sheath Branching Order Number Splice Protection Diameter Opening Kit max. min. max. Type [mm] [mm] [mm] SCX 43/ 8-130 43 8 130 A S46896-A67-A100 43/ 8-210 43 8 210 A S46896-A67-A101 43/ 8-300 43 8 300 A S46896-A67-A102 43/ 8-430 43 8 430 A S46896-A67-A103 75/15-160 75 15 160 A S46896-A68-A184 75/15-250 75 15 250 A S46896-A68-A186 75/15-300 75 15 300 A S46896-A68-A187 75/15-430 75 15 430 A S46896-A68-A188 93/25-190 93 25 190 B S46896-A69-A100 93/25-250 93 25 250 B S46896-A69-A159 93/25-430 93 25 430 B S46896-A69-A102 122/28-190 122 28 190 B S46896-A70-A100 122/28-280 122 28 280 B S46896-A70-A101 122/28-430 122 28 430 B S46896-A70-A102 137/34-330 137 34 330 C S46896-A71-A104 137/34-430 137 34 430 C S46896-A71-A101 SCX C 43/8-200 43 8 200 A S46896-A67-A171 43/8-350 43 8 350 A S46896-A67-A92 43/8-500 43 8 500 A S46896-A67-A93 75/15-300 75 15 300 A S46896-A68-A189 75/15-500 75 15 500 A S46896-A68-A190 93/25-300 93 25 300 B S46896-A69-A158 93/25-500 93 25 500 B S46896-A69-A93 93/25-700 93 25 700 B S46896-A69-A95 122/28-400 122 28 400 B S46896-A70-A150 122/28-500 122 28 500 B S46896-A70-A93 122/28-700 122 28 700 B S46896-A70-A95 160/48-500 160 48 500 C S46896-A72-A190 160/48-700 160 48 700 C S46896-A72-A94 200/48-500 200 48 500 C S46896-A72-A191 200/48-700 200 48 700 C S46896-A72-A158 56

Standard Heat-shrinkable Closure SCX Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS2 AVL/MS2 AVL/MS2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] 0.4 10-30 10-30 10-30 - - - 43/8-130 0.5-0.6 10 10-30 10-30 - - - 0.8-0.9 10-10 - - - 0.4 10-30 10-50 10-50 - - - 43/8-210 0.5-0.6 10-30 10-50 10-30 - - - 0.8-0.9 10-20 - 10-20 - - - 0.4 10-50 10-50 10-75 - - - 43/8-300 0.5-0.6 10-30 10-50 10-50 - - - 0.8-0.8 10-30 - 10-30 - - - 0.4 10-100 10-150 10-100 - - - 43/8-430 0.5-0.6 10-75 10-150 10-75 - - - 0.8-0.9 10-50 - 10-50 - - - 0.4 50-100 50-150 50-100 - - - 75/15-160 0.5-0.6 50-75 50-150 50-75 - - - 0.8-0.9 10-50 - 10-50 - - - 0.4 50-100 50-150 50-100 50-150 50-200 50-150 75/15-250 0.5-0.6 50-75 50-150 50-75 50-100 50-150 50-100 0.8-0.9 10-50 - 10-50 10-100 10-100 - 0.4 50-200 50-250 50-150 - - - 75/15-300 0.5-0.6 50-100 50-250 50-100 - - - 0.8-0.9 10-100 - 10-75 - - - 0.4 50-250 50-300 50-200 50-300 50-400 50-250 75/15-430 0.5-0.6 50-150 50-300 50-150 50-200 50-200 50-200 0.8-0.9 10-100 - 10-75 10-100 10-150 10-100 0.4 150 200 150 400 400 200 93/25-190 0.5-0.6 100 150-200 100 250 250 150 0.8-0.9 50-50 150 150 100 0.4 200-250 200-300 200 200-400 200-400 200-250 93/25-250 0.5-0.6 150 150-300 150 150-250 150-250 150-200 0.8-0.9 30-150 - 30-100 30-150 30-200 30-150 0.4 200-400 200-500 200-400 200-600 200-600 200-500 93/25-430 0.5-0.6 150-300 150-500 150-250 150-400 150-500 150-400 0.8-0.9 30-250 - 30-150 30-250 30-300 30-250 0.4 200-400 250-300 200-400 250-500 250-500 250-400 122/28-190 0.5-0.6 200-250 200-300 200 200-300 200-400 200-300 0.8-0.9 50-200 - 50-150 50-250 50-250 50-200 0.4 250-400 250-500 250-300 250-600 250-600 250-500 122/28-280 0.5-0.6 200-250 200-500 200-250 200-300 200-500 200-400 0.8-0.9 50-250 - 500-200 50-300 50-300 50-300 0.4 250-600 250-900 250-500 250-900 250-900 250-800 122/28-430 0.5-0.6 200-400 200-900 200-400 200-600 200-800 200-600 0.8-0.9 50-300 - 50-300 50-400 50-500 50-400 0.4 400-600 400-800 400-600 400-900 400-900 400-800 137/34-330 0.5-0.6 300-500 300-800 300-500 300-500 300-500 300-400 0.8-0.9 100-300 - 100-300 100-300 100-300 100-300 0.4 400-800 400-900 400-600 400-1000 400-1000 400-900 137/34-430 0.5-0.6 300-600 300-900 300-500 300-600 300-800 300-600 0.8-0.9 100-300 - 100-300 100-400 100-500 100-400 57

Standard Heat-shrinkable Closure SCX C Capacities in Pairs Single Connectors Modular Connectors Type Conductor 3M UY 2 AMP Picabond AVH AVL/MS 2 AVL/MS 2 AVL/MS 2 Sheath Diameter Butt Inline B-wire 10/20 Pairs 25 Pairs 25 Pairs + Opening Connector Connector Conn. Sealant Box [mm] [pairs] [pairs] [pairs] [pairs] [pairs] [pairs] 0.4 10-30 10-50 10-50 - - - 43/8-200 0.5-0.6 10-30 10-30 10-30 - - - 0.8-0.9 10-20 - 10-20 - - - 0.4 10-50 10-75 10-75 - - - 43/8-350 0.5-0.6 10-30 10-75 10-30 - - - 0.8-0.9 10-30 - 10-30 - - - 0.4 10-100 10-150 10-100 - - - 43/8-500 0.5-0.6 10-75 10-150 10-75 - - - 0.8-0.8 10-50 - 10-50 - - - 0.4 100 150 50-100 75-200 75-250 75-150 75/15-300 0.5-0.6 75 75-150 50-75 50-100 50-150 50-100 0.8-0.9 10-50 - 10-50 30-100 30-100 - 0.4 75-250 75-300 75-200 75-300 75-400 75-250 75/15-500 0.5-0.6 50-150 50-300 50-150 50-200 50-200 50-200 0.8-0.9 30-100 - 30-100 30-100 30-150 30-100 0.4 200-250 200-300 200 200-300 200-300 200-250 93/25-300 0.5-0.6 150-200 150-300 150 150-200 150-250 150-200 0.8-0.9 50-150 - 50-100 50-150 50-200 50-150 0.4 200-400 200-500 200-400 200-600 200-600 200-500 93/25-500 0.5-0.6 150-300 150-500 150-250 150-400 150-500 150-400 0.8-0.9 50-250 - 50-150 50-250 50-300 50-250 0.4 200-500 200-600 200-500 200-800 200-800 200-600 93/25-700 0.5-0.6 150-300 150-600 150-250 150-500 150-600 150-500 0.8-0.9 50-250 - 50-150 50-300 50-400 50-300 0.4 300-500 300-600 300-400 300-600 300-600 300-500 122/28-400 0.5-0.6 200-400 200-600 200-300 200-300 200-500 200-400 0.8-0.9 50-250 - 50-250 50-300 50-300 50-300 0.4 300-600 300-900 300-500 300-900 300-900 300-800 122/28-500 0.5-0.6 200-400 200-900 200-400 200-600 200-800 200-600 0.8-0.9 50-300 - 50-300 50-400 50-500 50-400 0.4 300-800 300-1000 300-600 300-1000 300-1200 300-900 122/28-700 0.5-0.6 200-500 200-1000 200-600 200-800 200-900 200-600 0.8-0.9 50-300 - 50-300 50-400 50-600 50-500 0.4 800-1000 800-1200 800-900 800-1600 800-1800 800-1200 160/48-500 0.5-0.6 400-900 400-1200 400-800 400-1000 400-1200 400-900 0.8-0.9 200-500 - 200-500 200-600 200-800 200-500 0.4 800-1200 800-800-1000 800-1800 800-2400 800-1800 160/48-700 0.5-0.6 400-1000 - 400-900 400-1200 - 400-1200 0.8-0.9 200-600 - 200-600 200-800 - 200-800 0.4 1200-1800 1200-1200-1800 1200-2400 1200-2400 1200-2400 200/48-500 0.5-0.6 1200-800-1200 800-1200 - 800-1200 0.8-0.9 250-800 - 250-800 250-800 - 250-800 0.4 1200-2400 1200-1200-2400 - - - 200/48-700 0.5-0.6 1200 - - - - - 0.8-0.9 250-800 - - - - - 58

Heat-shrinkable Wrap Around Repair Sleeves SCX R (Standard), GSC R (Reinforced) Description, Dimensions, Order Numbers Application SCX R / GSC R sleeves are used for repairing damaged plastic or metal cable sheaths or for providing corrosion protection. The sleeves are suitable for all types of non-pressurized cables in buried, ducted or aerial applications. Repair sleeves for pressurized cables on request. Design The sleeves are made of fully cross-linked polyolefin and on the inner surface coated with hot-melt adhesive which ensures a permanent and reliable sealing. In addition, the reinforced GSC R sleeves are equipped with a PE net embedded between the outer and inner sleeve layer. A flexible stainless steel channel is used to close the sleeve. This channel can be cut off after cooling down of the sleeve. Installation Dimensions, Order Numbers The sleeve is wrapped around the cable area to be repaired or protected. With the flame of a standard gas torch the sleeve is shrinked onto the cable sheath. Type Length Recommended Inner Diameter Order Number Application Range from to from to [mm] [mm] [mm] [mm] [mm] Standard-Sleeves SCX R SCX R 1-250 250 35 10 43 8 S46898-A1236-A225 SCX R 1-500 500 35 10 43 8 S46898-A1236-A226 SCX R 1-750 750 35 10 43 8 S46898-A1236-A227 SCX R 1-1000 1000 35 10 43 8 S46898-A1236-A228 SCX R 1-1500 1500 35 10 43 8 S46898-A1236-A251 SCX R 2-250 250 50 20 75 15 S46898-A1241-A225 SCX R 2-500 500 50 20 75 15 S46898-A1241-A226 SCX R 2-750 750 50 20 75 15 S46898-A1241-A227 SCX R 2-1000 1000 50 20 75 15 S46898-A1241-A228 SCX R 2-1500 1500 50 20 75 15 S46898-A1241-A269 SCX R 3-250 250 80 30 93 25 S46898-A1250-A225 SCX R 3-500 500 80 30 93 25 S46898-A1250-A226 SCX R 3-750 750 80 30 93 25 S46898-A1250-A227 SCX R 3-1000 1000 80 30 93 25 S46898-A1250-A228 SCX R 3-1500 1500 80 30 93 25 S46898-A1250-A265 59

Heat-shrinkable Wrap Around Repair Sleeves SCX R (Standard), GSC R (Reinforced) Dimensions, Order Numbers Type Length Recommended Inner Diameter Order Number Application Range from to von bis [mm] [mm] [mm] [mm] [mm] SCX R 4-250 250 105 40 122 28 S46898-A1256-A225 SCX R 4-500 500 105 40 122 28 S46898-A1256-A226 SCX R 4-750 750 105 40 122 28 S46898-A1256-A227 SCX R 4-1000 1000 105 40 122 28 S46898-A1256-A228 SCX R 4-1500 1500 105 40 122 28 S46898-A1256-A252 SCX R 5-250 250 125 50 137 34 S46898-A1260-A225 SCX R 5-500 500 125 50 137 34 S46898-A1260-A226 SCX R 5-750 750 125 50 137 34 S46898-A1260-A227 SCX R 5-1000 1000 125 50 137 34 S46898-A1260-A228 SCX R 5-1500 1500 125 50 137 34 S46898-A1260-A253 Reinforced Sleeves GSC R GSC R 1-250 250 35 10 43 8 S46898-A1236-A252 GSC R 1-500 500 35 10 43 8 S46898-A1236-A253 GSC R 1-750 750 35 10 43 8 S46898-A1236-A254 GSC R 1-1000 1000 35 10 43 8 S46898-A1236-A255 GSC R 1-1500 1500 35 10 43 8 S46898-A1236-A256 GSC R 2-250 250 50 20 75 15 S46898-A1241-A270 GSC R 2-500 500 50 20 75 15 S46898-A1241-A271 GSC R 2-750 750 50 20 75 15 S46898-A1241-A272 GSC R 2-1000 1000 50 20 75 15 S46898-A1241-A273 GSC R 2-1500 1500 50 20 75 15 S46898-A1241-A274 GSC R 3-250 250 80 30 93 25 S46898-A1250-A266 GSC R 3-500 500 80 30 93 25 S46898-A1250-A267 GSC R 3-750 750 80 30 93 25 S46898-A1250-A268 GSC R 3-1000 1000 80 30 93 25 S46898-A1250-A269 GSC R 3-1500 1500 80 30 93 25 S46898-A1250-A270 GSC R 4-250 250 105 40 120 28 S46898-A1256-A253 GSC R 4-500 500 105 40 120 28 S46898-A1256-A254 GSC R 4-750 750 105 40 120 28 S46898-A1256-A255 GSC R 4-1000 1000 105 40 120 28 S46898-A1256-A256 GSC R 4-1500 1500 105 40 120 28 S46898-A1256-A257 GSC R 5-250 250 140 70 160 55 S46898-A1260-A254 GSC R 5-500 500 140 70 160 55 S46898-A1260-A255 GSC R 5-750 750 140 70 160 55 S46898-A1260-A256 GSC R 5-1000 1000 140 70 160 55 S46898-A1260-A257 GSC R 5-1500 1500 140 70 160 55 S46898-A1260-A258 GSC R 6-250 250 170 80 200 65 S46898-A1269-A221 GSC R 6-500 500 170 80 200 65 S46898-A1269-A222 GSC R 6-750 750 170 80 200 65 S46898-A1269-A223 GSC R 6-1000 1000 170 80 200 65 S46898-A1269-A224 GSC R 6-1500 1500 170 80 200 65 S46898-A1269-A225 60

Gas Torch Set Gas Torch Set The soldering and gas torch set is tailored to the requirements of processing heat-shrink components. The set comprises: Transport and storage box, pistol-grip fitting, torch tips LS 9, LS 30, LS 40, 6 m hose, wrench, gas lighter, steel cylinder 425 g, valve and refilling adapter. Designation Gas Torch Set Order Number 5VW8520 Spare parts for gas torch set on request. 61

62

Connection and Distribution Systems, Cabinets and Boxes 63

1001/2001 Series Distribution System Introduction Characteristics The 10-pair strips in the 1001/2001 Series have the following characteristics: 1001 Series: Cables and jumper sides equipped with basic IDC clamps 2001 Series: Jumper side with double IDC clamps and cable side with single IDC clamps: Implementation Options 1001/2001 Series strips are normally installed close to the subscriber, e.g. in Cross-connection cabinets Terminal distribution boxes Distribution boxes/cabinets uninterruptible jumpering Jumper side is higher than cable side: improved access to IDC clamps Wire Ø 0.4-0.8 mm 3/5-point protection, front-pluggable Tools are not required for installing / removing strips 64

1001/2001 Series Distribution System 1001 Series Strips Cable side Jumper side 1001 Series Disconnection Strip Designation, Delivery Unit Order Number The IDC contact springs on the cable side always touch the contact springs on the jumper side. They are only separated when a disconnection plug is inserted. 10 Disconn. Strips C39104-A92-A63 2 Numbering Strips, 10 Color Marking S45755-B2-A1 Labels (DTAG* code compliance) Cable side Jumper side 1001 Series Connection Strip Designation, Delivery Unit Order Number The connection strip is equipped with clamps which extend from the cable side to the jumper side. Contact cannot be interrupted and switching cannot be triggered by inserting a protection connector. 10 Connection Str. C39104-A92-A64 2 Numbering Strips, 10 Color Marking S45755-B2-A3 Labels (DTAG* code compliance) Cable side Jumper side 1001 Series Switching Strip Designation, Delivery Unit Order Number The contact springs on the cable side do not touch the contact springs on the jumper side. Contact is only established when a protection connector is inserted. 10 Switch. Strips C39104-A92-A65 2 Numbering Strips, 10 Color Marking S45755-B2-A2 Labels (DTAG* code compliance) * Deutsche Telekom AG 65

1001/2001 Series Distribution System 2001 Series Strips Cable side 2001 Series Disconnection Strip Designation, Delivery Unit Jumper side Order Number The jumper side on the 2001 Series disconnection strip is equipped with double clamps for uninterruptible switching. Apart from this, the 2001 Series disconnection strip corresponds to its 1001 Series counterpart. 10 Disconn. Strips C39104-A92-A55 2 Numbering Strips, 10 Color Marking S45755-B2-A14 Labels (DTAG* code compliance) Cable side 2001 Series Connection Strip Designation, Delivery Unit Jumper side Order Number The jumper side on the 2001 Series connection strip is also equipped with double clamps for uninterruptible switching. Apart from this, the 2001 Series connection strip corresponds to its 1001 Series counterpart. 10 Conn. Strips C39104-A92-A51 2 Numbering Strips, 10 Color Marking S45755-B2-A4 Labels (DTAG* code compliance) Cable side 2001 Series Switching Strip Designation, Delivery Unit Jumper side Order Number The contact springs on the cable side do not touch the contact springs on the jumper side. Contact is only established when a protection connector is inserted. 10 Switch. Strips C39104-A92-A66 2 Numbering Strips, 10 Color Marking S45755-B2-A15 Labels (DTAG* code compliance) 66

1001/2001 Series Distribution System Grounding Strip, Dropwire Connection Strip Grounding Strip Designation, Delivery Unit Order Number All IDC clamps on the grounding strip are connected to the grounded mounting frame via a grounding comb. This ensures that all IDC contacts are connected to the ground potential. 1 Grounding Strip C39104-A92-A67 S45755-B2-A16 Jumper side Cable side Dropwire Connection Strip The dropwire connection strip is equipped with spring terminals on the cable side for dropwire subscriber cables (wire diameter 0.4-2.0 mm). Apart from this, the dropwire connection strip corresponds to the 1001 Series connection strip. Designation, Delivery Unit 1 Dropwire Connection Strip C39104-A92-A1, 1 Color Marking Label (DTAG* code compliance) * Deutsche Telekom AG Order Number S45755-B2-A5 67

1001/2001 Series Distribution System Overvoltage / Overcurrent Protection a a' b b' Overvoltage Protection Plug* (3-point protection) Equipped with a 3-electrode arrester plus shortcircuit springs Wire pair protection Nominal response voltage 230 V Designation, Delivery Unit Order Number Overvoltage Protection Plug, 10 pcs. S45755-B2-A6 a a' b b' Overvoltage/Overcurrent Protection Plug* (5-point protection) Equipped with a 3-electrode arrester plus shortcircuit springs and two PTCs Wire pair protection Nominal response voltage 230 V Nominal response current 145 ma Designation, Delivery Unit Overvoltage/Overcurrent Protection Plug, 10 pcs. Order Number S45755-B2-A7 Grounding Bracket for Protection Plugs * A grounding bracket must be installed to ensure the connection from the protection plug to the ground potential. The frame must be correctly grounded. Designation, Delivery Unit Grounding Brackets, 10 pcs. Order Number S45755-B2-A8 68

0 0 1001/2001 Series Distribution System Overvoltage / Overcurrent Protection a a' b b' Overvoltage Protection Magazine (without arrester) Designation, Delivery Unit Order Number To be equipped with twenty 2-electrode arresters without a short-circuit spring Protection for 10 wire pairs Overvoltage Arrester Nominal response voltage 230 V Overvoltage Protection Mag., 10 pcs. S45055-B20-A10 Overvoltage Arrester, 1 pc. Q69-X224 For detailed information on protection methods in communications technology, refer to the "Overvoltage and Overcurrent Protection in Telecommunication Networks" (Order No. A45050-W3123-D7-X-7600). Dimensions of Strips with Protection, Installed in a Mounting Frame! 0 "! 0 " ' " " H = 27 mm or 54 mm " " H = 27 mm or 54 mm Mounting frame with strip and overvoltage protection magazine Mounting frame with strip and overvoltage or overvoltage/overcurrent plug 69

1001/2001 Series Distribution System Plugs, Marking Caps, Cords Plugs and Marking Caps Disconnection plugs (item 3 in picture) and dummy plugs (item 4) are available. Disconnection plugs are used to disconnect internal and external lines. Dummy plugs indicate connections which must be retained. Marking caps (item 1) are used to indicate special lines. They must be clamped between the IDC contacts. 1 2 3 4 The numbering strips 1...91 and 10...100 (item 2) are included in the strip scope of delivery. Type Description Color Order Number Disconn. Plug Has 2 tongues for disconnecting internal and external lines brown S45755-B2-A9 Dummy Plug Does not disconnect. Has 2 reeds for a wire pair, prevents inadvertent disconnection red S45755-B2-A10 Marking Caps For 1001 Series red, blue S45055-B20-R2 Marking Caps For 2001 Series red, blue S45055-B20-R1 Scope of delivery: each 10 pcs. Cords Test and connecting cords are available for implementing tests and measurements, and for jumpering at short notice. Connecting cord Test cord Type Length Order Number Test Cord, bi-polar, with 2 adapters for multiple-spring wire plugs 0.25 m S45055-A106-A3 Test Cord, bi-polar, with 2 adapters for multiple-spring wire plugs 1.50 m S45055-A106-A2 Test Cord, 4 poles, with 4 adapters for multiple-spring wire plugs 1.50 m S45755-B2-A11 Connecting Cord, bi-polar 1.50 m S45055-A106-A5 Connecting Cord, 4 poles 1.50 m S45755-B2-A12 Scope of delivery: each 1 pc. 70

1001/2001 Series Distribution System Tools Tools Only a few simple tools are required for wiring and technical service. Termination Tool For connecting wires Cutting device with lock for cutting back excess wire length Extraction hook for removing connected wires Designation Termination Tool Order Number C39407-A139-A13 Arrester Extraction Tool For inserting and removing arresters in the overvoltage protection magazine. Designation Arrester Extraction Tool Order Number C39407-A149-A8 71

1001/2001 Series Distribution System Mounting Frames, Cable Terminal Heads Mounting Frames Mounting frames are used to secure strips in main distribution frames, distribution boxes, etc. They can accommodate up to 30 strips with label frames and can be adjusted to the required length using a sidecutting pliers. The cables or wires are threaded through the holes provided. Wire protecting grommets can be ordered specially for this purpose. Designation Mounting Frame, Height 27 mm Mounting Frame, Height 54 mm Wire Protecting Grommet, 10 pcs. Order Number S45055-B20-R7 S45055-B20-R8 S45055-B20-R4 Cable Terminal Heads The cable terminal head is used to house up to 10 strips in a cross-connection cabinet. The cable terminal head is secured quickly and simply in the jumper frame of the cross-connection cabinet using four spikes with captive screws (included in scope of delivery). Designation Cable Terminal Head Order Number S45055-B20-A1 72

! % 1001/2001 Series Distribution System Label Frames, Strip Dimensions Label Frame with Label Strip Used to identify mounting frames and cable terminal heads (see picture page 72). Designation Label Frame with Label Strip Label Strips, 10 pcs. Order Number S45055-B20-R6 S45055-B20-A4 Dimensions # ' % # ' %! " % % % Disconnection Strip 1001/2001 Series Connection Strip 1001/2001 Series Switching Strip 1001/2001 Series Grounding Strip Dropwire Connection Strip Length of the strips: 121 mm 73

1001/2001 Series Distribution System Technical Data Technical Data Contact principle observes DIN IEC 352 Insulation displacement connection to accommodate either 1 or 2 lines per IDC clamp Spring material Tin bronze Contact surface Ag (4-7 µm) Contact surface Module material Polycarbonate Suitable for: Cable side: 1001/2001 Series strips Solid conductor with a diameter of 0.4-0.8 mm Outside diameter max. 1.4 mm (a solid conductor diameter 0.8 mm) Grounding strip Solid conductor with a diameter of 0.4 to max. 2.0 mm Dropwire connection strip Outside diameter max. 2.6 mm (with PE or PVC insulation) Jumper side: 1001/2001 Series strips and Solid conductor with a diameter of 0.4-0.6 mm Dropwire connection strip Outside diameter max. 1.1 mm (with PE or PVC insulation) Service life with 0.4-0.6 mm Ø 200 clampings with 0.8 mm Ø 50 clampings with max. 2.0 mm Ø (dropwire strip) 50 clampings Volume resistance at clamping point < 2 mohm (when new) (observes DIN EN 60352-3) < 3 mohm (in service) Dielectric strength observes (draft) DIN VDE 0845-2 > 2000 V eff Insulation resistance under lab. conditions observes (draft) DIN VDE 0845-2 > 5 x 10 10 Ohm (when new) Surge voltage observes VDE 0433 > 2 kv (surge discharge 10/700 µs) 25/100/21 Max. cold -25 C Ambient conditions Dry heat +100 C observes DIN EN 6008-1 Humidity (constant) 21 days 74

Cross-Connection Cabinet KVz Application The weatherproof cross-connection cabinet is designed to accommodate cable terminal heads (page 72) at switching and distribution points in the communications network. As well as terminal heads, a range of other distribution components can be installed. If 1001/2001 Series connection and distribution strips are installed, up to 1200 wire pairs can be connected and distributed in the crossconnection cabinet. Cross-connection cabinets are normally mounted on a base. Cables are inserted into the cabinet through the base. Features of Cross-Connection Cabinet KVz 82 Cross-Connection Cabinet KVz 82 Plastic housing fiber-glass reinforced Door/backplane with structured DD enameling Rupture joints in the side walls so that several cross-connection cabinets can be connected in a row Frame for optical fiber distribution components with zinc coating (electrical conductivity) Base plate with rubber grommets Door stop (left or right, door swing 110º) Features of Base Cable base fiber-glass reinforced With/without ventilation Designation Weight Order Number [kg] Base for Cross-Connection Cabinet KVz 82 Cross-Conn. Cabinet 38 S45052-C1-A1 Base without Ventilation 28 S45052-Z31-A21 Base with Ventilation 28 S45052-Z31-A25 75

Wall-Mounted Distribution Enclosures/Boxes for 1001/2001 Series FM/K Wall-Mounted Distribution Enclosures Characteristics of FM/K Wall-Mounted Distribution Enclosures Compact distribution enclosure (sheet steel) Steel hood (2 mm sheet steel) Flanged panel with cable entry at the underside of the cabinet Grounding bar and cable support bar installed Mounting rail for module carriers and cable routing guides Painted in RAL 7032 IP 55 protection observes DIN EN 529/10.91 Distribution Designation Height Width Depth Weight Distance Enclosure/ between Vertical Box [mm] [mm] [mm] [kg] Rows Enclosure FM/K1 500 300 120 5 variable Enclosure FM/K2 500 500 120 7 variable Enclosure FM/K3 700 300 120 9 variable Enclosure FM/K4 700 900 120 12 variable Box FM/E1 110 180 111 2 variable Box FM/E2 180 180 111 2.5 variable Box FM/E3 180 254 111 3 variable Box FM/E4 254 360 111 3.5 variable Box FM/B1 210 191 108 0.93 variable Box FM/B2 210 191 108 0.95 variable Box FM/B3 390 223 124 1.5 variable 76

Wall-Mounted Distribution Enclosures/Boxes for 1001/2001 Series FM/E and FM/B Wall-Mounted Distribution Boxes Characteristics of FM/E Wall-Mounted Distribution Boxes Compact distribution box, fiber glass-reinforced with polycarbonate Pre-cut with PG for cable entry Paint RAL 7035 IP 66 protection observes DIN EN 529/10.91 Mounting plate and mounting kit included in scope of delivery Characteristics of FM/B Wall-Mounted Distribution Boxes Compact distribution box, fiber glass-reinforced with polycarbonate/polyester Cable insertion via rubber grommets Painted in RAL 7032 IP 64 protection observes DIN EN 529/10.91 Mounting frame for 1001/2001 Series strips included in scope of delivery Number of Max. Capacity Order Number Vertical Per Vertical Row Per Enclosure / Box Rows [10-paired Strips] [pairs] 1 10 100 S45752-Z502-A7 2 10 200 S45752-Z502-A8 2 20 400 S45752-Z502-A9 4 20 800 S45752-Z502-A10 1 3 30 S45752-Z502-A15* 1 5 50 S45752-Z502-A16 1 10 100 S45752-Z502-A17 2 10 200 S45752-Z502-A18 1 2 20 S45752-Z502-A19 1 3 30 S45752-Z502-A20 1 10 100 S45752-Z502-A21 Additional equipment variants are possible. *: Pack of 2 77

Accessories for Wall-Mounted Distribution Enclosures / Boxes Mounting Plate, PG-Threaded Cable Glands and PG Mounting Kits Mounting Plate for FM/E The mounting frames and distribution strips are attached to the mounting plate. The mounting plate is then installed in the distribution box. Suitable Delivery Weight Order Number for Unit [kg] FM/E1 10 pcs. 0,5 S45752-Z502-A150 FM/E2 10 pcs. 0,6 S45752-Z502-A151 FM/E3 8 pcs. 0,6 S45752-Z502-A152 FM/E4 4 pcs. 0,6 S45752-Z502-A153 PG-Threaded Cable Glands, Adapter Ring for FM/E The cables must be inserted into the box using PG cable glands so that the FM/E distribution boxes ensure IP 66 protection. In the distribution box, the smallest pre-cut hole for the cable gland is size 16. To insert cables with a smaller diameter (6-12 mm) into the distribution box, PG 13.5 cable glands must be installed using an adapter ring. Size Cable Ø Delivery Order Number [mm] Unit PG 13.5 6-12 10 pcs. S45752-Z502-A161 PG 16 10-14 10 pcs. S45752-Z502-A140 PG 21 13-18 10 pcs. S45752-Z502-A141 PG 29 18-25 10 pcs. S45752-Z502-A142 Adapt. Ring f.pg 13.5 10 pcs. S45752-Z502-A146 PG Mounting Kits for FM/E The cables must be inserted into the box using PG mounting kits so that the FM/E distribution boxes ensure IP 54 protection. Size Cable Ø Deliv. Order Number [mm] Unit (Kit) PG 16 10-14 1 pc. PG 21 13-18 1 pc. PG 16 10-14 1 pc. PG 21 13-18 1 pc. PG 29 18-25 1 pc. PG 29 quadruple stem 1 pc. S45752-Z502-A143 S45752-Z502-A144 78

Accessories for Wall-Mounted Distribution Enclosures / Boxes Hinge Set, Lock, Connection Kit Hinge Set for FM/E Used to convert the removeable cover into a hinged cover. Designation Hinge Set Order Number S45752-Z502-A154 15 Lock for FM/K Distribution Enclosure Used to retro-fit FM/K distribution enclosures. Designation Weight Order Number [kg] Lock 0,1 S46998-Z101-S26 Key 0,1 S46998-Z101-S27 Connection Kit for FM/E Used to connect a row or stack of FM/E distribution boxes. Size Cable Ø Delivery Order Number [mm] Unit Pg 16 10-14 20 pcs. S45752-Z502-A155 Pg 21 13-18 20 pcs. S45752-Z502-A156 Pg 29 18-25 20 pcs. S45752-Z502-A157 79

80

Additional Information 81

Training Knowledge is precious which is why we pass it on As a leading manufacturer of communication cables, cable accessories and networks we are working with our customers to build communication bridges for the 21st century. We realize that the planning, installation and maintenance of cable systems involves comprehensive knowledge something we want to share with you as part of a genuine partnership. We do the training you get the profit Our worldwide knowledge in cable and network technology is channeled into our Training Center. On the basis of this knowledge, we develop diverse seminars for your staff. Training: expertise for your personnel Total solutions are becoming ever more important for communication networks. Of particular importance in this context are solutions for local networks (LANs) for use on customer premises, and in the carrier area (e.g. telecommunication, CATV IP net-works) because the future lies in the integration of speech, image and data. At the same time, as world-spanning information infrastructure grows, also the quality requirements to be met by networked communication solutions are growing. This demands knowledge knowledge that we can pass on to you. Our training is aimed at all those who set up or operate carrier or customer premise cable networks. By undertaking training before starting on a project you will avoid costly installation errors, and will put in place a critical prerequisite for the successful implementation of your project. Practical orientation, not theoretical dreams The balance is critical: theory is necessary, but practicality dictates what must be done. From their many years of practical experience, our trainers know which knowledge and skills are required for each task, and they are in constant contact with development, sales and projects engineering at Corning No-one can do everything but everything can be learned Techniques and products are subject to constant change. This makes it essential to have staff trained to the highest levels, who know how to utilize technical progress to your advantage. This can only be achieved by continuous training. We offer many different courses on our products, fiber optic cable splicing and measurement techniques. For information about current courses and dates please contact your local sales representative or visit our website at http://www.corning.com/cablesystems/europe 82

Contacts Headquarters, Europe Headquarters Europe, Asia / Pacific, Africa: Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11-0 Fax: ++ 49-89 - 51 11-34 16 Europe Germany Gross-Berliner Damm 82 a 12487 Berlin GERMANY Tel.: ++ 49-30 - 53 03-21 41 Fax: ++ 49-30 - 53 03-21 72 France S.A. 28170 Favières FRANCE Tel.: ++ 33-2 - 37 51 05 58 Fax: ++ 33-2 - 37 51 81 39 Italy Via Cernaia, 2 10 122 Torino ITALY Tel.: ++ 39-011 - 5 65 78 11 Fax: ++ 39-011 - 5 06 95 65 Spain Edificio Bronce, 4th Floor Plaza Manuel Gomez Moreno 28020 Madrid SPAIN Tel.: ++ 34-91 - 4 56 43 00 Fax: ++ 34-91 - 4 56 43 20 United Kingdom Fallows Way Whiston, Merseyside L35 1RZ ENGLAND Tel.: ++ 44-151 - 4 43 62 00 Fax: ++ 44-151 - 4 43 63 98 83

Contacts Eastern Europe Eastern Europe Alexander Volk Regional Sales Director Eastern Europe Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11 31 06 Mobile: ++ 49-170 - 7 63 21 93 Fax: ++ 49-89 - 51 11 34 49 E-mail: Alexander.Volk@corning.com Bosnia-Herzogovina Mr. Gabriel Coros Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11 31 06 Mobile: ++ 49-172 - 2 86 77 30 Fax: ++ 49-89 - 51 11 34 49 E-mail: Gabriel.Coros@corning.com Bulgaria Pentacor Mr. Radoslav Naidenov 1606 Sofia, Iwailo 25-A, App.4 1113 Sofia Tel.: ++ 359-2 - 9 71 24 15 Mobile: ++ 359-88 - 50 60 60 Fax: ++ 359-2 - 9 71 32 14 Kazakhstan Siemens Kasachstan Mr. Oleg Lschuk Zharokov st. 20 480008 Almaty Tel.: ++ 7-32 72 50 92 69 Latvia Siemens SIA Mr. Ivars Auza Viandes Iela 3 1010 Riga Tel.: ++ 371-701 - 55 55 / 55 08 Mobile: ++ 371-9 21 09 02 Fax: ++ 371-7 01 55 44 E-mail: ivars.auza@siemens.fi Poland ZWUT S.A. Mr. Dariusz Krol Ul. Zupnicza 11 03-821 Warszawa Tel.: ++ 48-22 - 6 70 96 84 Fax: ++ 48-22 - 6 70 94 29 E-mail: dariusz.krol@wan.oen.siemens.de Romania EMCOM Ltd. Mr. Ionel Lungu 266-268 Calea Rahovei Sector 5 Bucharest Tel.: ++ 40-1 - 423-41 99 Fax: ++ 40-1 - 423-41 92 E-mail: SMTP.ionel.lungu@wan.icn.siemens.de Russia Siemens OOO Dr. Evgenij Gutstein Ul. Malaya Kaluzhskaya 19 117071 Moscow Tel.: ++ 7-095 - 7 37 19 75 Mobile: ++ 7-095 - 7 68 89 22 Fax: ++ 7-095 - 7 37 19 19 E-mail: evgenij.gutstein@mow.siemens.ru Serbia Siemens d.o.c. Mr. P. Pejic Knez Mihailova 30 Beograd Tel.: ++ 381-11 - 63 04 89 Fax: ++ 381-11 - 63 00 50 Ukraine Mr. Alexander Volk Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11 31 06 Mobile: ++ 49-170 - 7 63 21 93 Fax: ++ 49-89 - 51 11 34 49 E-mail: Alexander.Volk@corning.com 84

Contacts Asia, South-East Asia, Australia Asia, South-East Asia, Australia Mr. Heinz-Josef Prediger Regional Sales Director Asia / Pacific Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89- 51 11-31 16 Mobile: ++ 49-171 - 5 66 72 18 Fax: ++ 49-89 - 51 11-34 32 E-mail: Heinz-Josef.Prediger@corning.com Mr. Henning Vogt Regional Sales Dir. South-East Asia / Australia Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11-31 15 Mobile: ++ 49-170 - 9 15 78 40 Fax: ++ 49-89 - 51 11-34 32 E-mail: henning.vogt@corning.com Australia Corning Cables Australia Mr. Kevin Williams 74-84 Main Road, Clayton 3168 Melbourne, Victoria Tel.: ++ 61-3 - 95 38 23 79 Mobile: ++ 61-40 - 8 87 89 78 Fax: ++ 61-3 - 95 38 23 05 E-mail: williams@corningcables.com.au Bangladesh Siemens Bangladesh Ltd. Mr. Khaled Shams Jiban Bima Tower 12th Fl, 10 Dilkusha Commercial Area 1000 Dhaka Tel.: ++ 880-2 - 9 56 37 34 Mobile: ++ 880-2 - 9 55 13 81 Fax: ++ 880-2 - 9 56 37 40 E-mail: sbl@bangla.net India SPCNL Mr. S.N. Bhat Plot No. 484-485, Phase III Sector-20, Udyog Vihar 122016 Gurgaon/Haryana Tel.: ++ 91-124 - 6 34 51 00-09 Extn.: 720 Fax: ++ 91-124 - 6 34 51 11, 6 34 34 85 E-mail: sn.bhat@ggn.spcnl.co.in Indonesia Malaysia SEE Mr. Roger Luckhardt 12th Floor, Menara Choy Fook On Jalan Yong Shook Lin 46050 Petaling Jaya, Selangor Tel.: ++ 603-7 51 38 88 Mobile: 1 22 02 05 03 Fax: ++ 603-7 55 73 31 E-mail: Roger.Luckhardt@see.siemens.com.my Philippines Siemens Inc. Ms. Nenette Eufemio 12/F Salcedo Towers 169 H.V.Dela Costa Street, Salcedo Village 1227 Makati City Tel.: ++ 63-2 - 8 14 96 25 Mobile: ++ 63-917 - 5 31 15 45 Fax: ++ 63-2 - 8 14 97 05 E-mail: nenette.eufemio@siemens.com.ph Siemens Inc. Mr. Roberto B. Cuevas 12/F Salcedo Towers 169 H.V.Dela Costa Street, Salcedo Village 1227 Makati City Tel.: ++ 63-2 - 8 14 96 19 Mobile: ++ 63-917 - 5 27 96 56 Fax: ++ 63-2 - 8 14 97 05 E-mail: robbie.cuevas@siemens.com.ph Singapore P.T. Siemens KO Mr. Jujian Sudarno Jl. Jend. A., Yani Kav. E 67-68, Pulmos 13210 Jakarta Tel.: ++ 62-21 - 4 72 91 00 Mobile: ++ 62-81 92 93 45 Fax: ++ 62-21 - 4 72 93 00 E-mail: sudarnoj@sko-com.co.id SAE Mr. Albert Tan 164 Kallang Way 05-04, Kolam Ayer Industrial Estate 349248 Singapore Tel.: ++ 65-8 45 46 51 Mobile: ++ 65-96 75 47 87 Fax: ++ 65-8 45 46 53 E-mail: albert.tan@sae.siemens.com.sg 85

Contacts Thailand, Vietnam, Greater China Thailand Siemens Ltd. Apirak Santipiromkul Charn Issara Tower II, 25th Floor, 2922/283 New Petchburi Rd, Bangkapi, Huaykwan, 10320 Bangkok Tel.: ++ 66-2 - 7 15 45 37 Mobile: ++ 66-18 15 32 98 Fax: ++ 66-2 - 7 15 49 36 E-mail: apiraks@siemens.co.th Vietnam Focal Mr. Le Ngoc Thao Km 27 from HCMC, Highway 1, Ngai Thang, Binh An Thuan An District Bihn Duong Province Tel.: ++ 84-650 - 74 90 99 Mobile: ++ 84-90 91 99 89 Fax: ++ 84-650 - 74 90 98 E-mail: lengoc.thao@sgn1.siemens.net Greater China Mr. Jianguo Xu Regional Sales Director Greater China Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51 11 31 12 Fax: ++ 49-89 - 51 11 34 32 E-mail: jianguo.xu@corning.com Hong Kong Corning Hongkong Ltd. Mr. Jerry Tse 34th F, Nanulife Tower, North Point Hong Kong Tel.: ++ 852-28 07-27 23 Fax: ++ 852-28 07-21 52 E-mail: tsekl@corning.com Siemens Ltd. Mr. Hamann Ngai 58th F, Central Plaza, 18 Harbour Road Wanchai Hong Kong Tel.: ++ 852-25 83-33 88 Mobile: ++ 852-98 37-82 13 Fax: ++ 852-28 02-41 27 E-mail: hamann.ngai@siemens.com.hk China Corning Shanghai Office Mr. Tinghong Yuan Room 3101, Lucky Target Square, 500 Chengdu Road North 200003 Shanghai Tel.: ++ 86-21 - 63 61-08 26 Fax: ++ 86-21 - 63 61-08 27 E-mail: tinghong.yuan@corning.com Taiwan Transwave Mr. Tony Fang 12F, No. 257, Sec. 2, Hoping E. Road Taipei Tel.: ++ 886-2 - 27 05 88 28 Fax: ++ 886-2 - 27 55 64 11 E-mail: transwav@ms6.hinet.net U-Tech Mr. C.L. Lu 2F, No.3, Alley 6, Lane 235, Paochiao Road Taipei-Hsien Tel.: ++ 886-2 - 29 17-64 76 Fax: ++ 886-2 - 29 12-31 83 E-mail: uta@utech.com.tw 86

Contacts Africa & Middle East Africa & Middle East Mr. Oben Uluc Regional Sales Director Africa & Middle East Kistlerhofstraße 170 81379 Munich GERMANY Tel.: ++ 49-89 - 51-11 - 31-17 Mobile: ++ 49-171 - 5 66 93 28 Fax: ++ 49-89 - 51 11-34 44 E-mail: Uluc.Oben@corning.com Algeria Siemens Bureau d Alger Mr. Aassim Berkane 5, rue Mohammed Saadi Souag, B.P. 112 16035 Hydra Tel.: ++ 213-2 - 60 72 07 Fax: ++ 213-2 - 59 13 33 Kingdom of Saudi Arabia Beit Al Etisalat Mr. Bernd Pannek P.O.Box 90209 11613 Riyadh Tel.: ++ 966-1 - 4 73 13 00 Ext.555 Mobile: ++ 966-5 - 4 40 66 79 Fax: ++ 966-1 - 4 76 93 57 E-mail: corning_pannek@hotmail.com South Africa Electhem Electrical Services Mr. Günter Hemetsberger La Lucia Glades Office Park, 1st Floor, Building 3 74, Armstrong Avenue 4321 La Lucia, KWA-Zulu Natal Tel.: ++ 27-31 - 5 72 26 66 Mobile: ++ 43-66 43 20 32 41 Fax: ++ 27-31 - 5 72 26 60 E-mail: guenter.hemetsberger@electhem.telecom.at Turkey Siemens Fiber Optik Kablolari Ltd. Sti. Mr. Cemal Sadiki Iplikdere Mevkii, Güzeltepe Köyü 849, Ada 2-3 Parsel Gebze / Kocaeli Tel.: ++ 90-262 - 7 42 06 71 Mobile: ++ 90-53 27 78 38 77 Fax: ++ 90-262 - 7 43 18 05 E-mail: cemal.sadiki@sfok.com.tr Siemens Fiber Optik Kablolari Ltd. Sti. Ucgen Plaza No. 7, Kat: 4 Cayiryolu Sokak 81120 Icerenköy-Istanbul Tel.: ++ 90-216 - 4 63 54 53 Fax: ++ 90-216 - 4 63 59 84 87