StarServe Accessories 8001/4EX, 8000INJ, 8000AVB, 8000DCB Installation Information
8001/4EX StarServe Output Expander The Output Expander allows you to increase your number of StarServe outputs without using an additional video hub. It consists of one input and four outputs. Connect an output of your existing video hub to the input of the Output Expander. You lose the use of an output on the video hub, but gain an additional four outputs on the Output Expander. You can connect an Output Expander to each output on a video hub, providing up to 32 outputs from an eight input hub. Parameter Description Output frequence 37 to 850 MHz Number of outputs 4 Number of inputs 1 Gain/loss 7.5 db Weight 60g Size (WxHxD) 100 x 65 x 20 Power requirement no IR pass back yes* * When combined with 8073/8VHPIR
8000INJ StarServe IR Injector The IR Injector allows you to insert an IR Target anywhere along the RG6 cable feed between the StarServe Video Hub and the TV. This means a Target can be placed away from the video out wall plate, to eliminate interference from a TV or a plasma screen. The IR Injector can be used with a Tube (8050TT), Flat (8050FT) or Shelf (8050S) Target. Parameter Power requirement IR input connection RG6 connections Description 12V d.c. 500mA 3-way Phoenix 2xF-type (female) 8050TT Tube Target 8050FT Flat Target 8050ST Shelf Target F-Type to PAL fl y lead 8000INJ IR Injector F-Type fl y lead 30PFM TV Socket (allows IR passthrough) Plasma TV Wallplate 8050FT Flat Target 8050P12/1600 3 of 8
8000AVB RCA to Cat 5 Cable Adapter Audio/Video Adapter Power Pass Video Audio L Audio R This adapter allows you to transmit standard video and stereo audio signals, as well as d.c. power over Cat 5e or Cat 6 UTP cable. An RCA to Cat 5 Cable Adapter is used at each cable end. Suitable for security camera installations integrated with StarServe. Parameter Connections Max. UTP cable length without signal loss* Max. d.c. input Description 3xRCA, 1xRJ45, 1x2.1mm d.c. 100m over Cat 6 UTP 50V @ 1A *No significant audio or video loss up to 100m. DC loss varies with current draw (e.g. at 200mA the typical loss would be 4V at 100m or 1V at 25m). 4 of 8
Category 5e or 6 cabling Patch leads d.c. power pack to suit your security camera or other device Audio/Video Adapter Power Pass Audio/Video Adapter Power Pass Video Audio L Audio R Video Audio L Audio R Power to socket outlet Yellow Red White RCA leads Power directly to camera 5 of 8
8000DCB Coaxial DC Block The d.c. Block is used to block direct current (d.c.) and infrared (IR) control pulses on a StarServe RG6 cable feed. It is inserted in an individual cable feed. It contains a capacitor which allows high frequency video and audio to pass, but blocks d.c. and low frequency IR. Parameter Operating temperature Storage temperature Max. d.c. input voltage Description -55 to 100 o C -55 to 100 o C 15V d.c. 6 of 8
Masthead amplifier Masthead amplifier power supply Amplifier T-Piece Power to socket outlet 8000DCB 7 of 8
Clipsal Australia Pty Ltd A member of Schneider Electric Contact us: clipsal.com/feedback National Customer Care Enquiries: Tel 1300 2025 25 Fax 1300 2025 56 clipsal.com Clipsal Australia Pty Ltd reserves the right to change specifications, modify designs and discontinue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.. The identified trademarks and copyrights are the property of Clipsal Australia Pty Ltd unless otherwise noted. F2333/01 CLIPCOM22627 Feb 2011