CATALOGUE 2012 MANUFACTURER OF HARDWARE & SUPPLIERS OF CABLE & CONNECTORS TO THE COMMUNICATIONS INDUSTRY

CATALOGUE 2012 MANUFACTURER OF HARDWARE & SUPPLIERS OF CABLE & CONNECTORS TO THE COMMUNICATIONS INDUSTRY

CONDITIONS OF SALE OF GOODS AND SERVICES 2. 2.2 2.3 3. 3.2 3.3 3.4 4. 4.2 5. 5.2 6. 7. 8. 9. Application These conditions apply to all contracts between BARENCO (hereafter known as the Seller) and the Buyer referred to in the order and override all conditions stipulated by the Buyer (even if submitted in a later document); any other agreements between the parties relating to the subject matter of this order are terminated (except an agreement into which these conditions are incorporated). No variation of these conditions is permitted unless agreed in writing by a Director of the Seller. Prices The price to be paid for the goods and/or service will be the Seller s price at the date when the goods are despatched or the service provided. Prices quoted in the Seller s catalogue are current at the time of going to press. Whilst every endeavour will be made to maintain them, we reserve the right to effect changes without prior notice. ALL PRICES QUOTED ARE EXCLUSIVE OF VALUE ADDED TAX AT THE CURRENT RATE. Payment on the invoice. The Seller reserves the right to charge interest on overdue sums at the rate of 4% per annum above the HSBC base The Seller may at any time require the Buyer to make payment in advance of delivery or require security for payment. If the Buyer fails to make payment by the due date or when required, the Seller may (without prejudice to any other remedy which it may have) cancel this contract between the Buyer and the Seller and/or suspend delivery under this or any other contract until payment is made. Delivery Delivery dates are approximate only and the Seller shall not be responsible for any loss or damage arising from any delay in delivering all or part of any goods ordered or delays in any provision of service. Despatch of orders are by Recorded Royal Mail or Carrier dependent on weight and size and charged to the Buyer. A scale of delivery charges is available from the seller on request. Cancellation Cancellation of an order can only be accepted before despatch of goods and after negotiation and agreement between the Buyer and Seller. In the case of any order for goods of a type or description not normally held in stock by the Seller, and therefore than ordered, the total price of the order being correspondingly adjusted. Returns No returns except under guarantee replacements will be accepted without the Seller s consent. Goods returned not wanted or incorrectly ordered will only be accepted in original packaging and may carry a 25% handling charge. In all instances the invoice number must be quoted. Shortages and Damaged goods delivery. Full details of circumstances on any loss must be given and packaging etc. retained. PARCELS DELIVERED IN A DAMAGED CONDITION SHOULD BE REFUSED AT THE POINT OF DELIVERY. Copyright and Patents Products in the Sellers publications may be subject to copyright, patent or other legal protection. The Seller accepts no liability for infringement of any such rights. Warranties All products supplied by the Seller are warranted as free from defect caused by faulty materials or workmanship for a Technical Advice Warranty shall not be affected by and no obligation or liability shall result from proving technical advice or service in connection with the customers order or the goods supplied. General This agreement shall be governed by and construed in accordance with the law of England.

INDEX PRODUCT PAGE PRODUCT PAGE PRODUCT PAGE ACCESSORIES 15-16 Blade Fuses & Holders 15 Batteries 16 Cable Strain Reliefs 15 DC T-Connectors 15 CABLE 4-7 Coaxial Cable Conforms to IEC 60332 Multicore Cable Screened Unscreened Conforms to IEC 60332 Power Cable 6-7 6 7 7 4-5 5 4 5 CABLE ACCESSORIES 13-14 Cable ties 13-14 Hanking ties 14 Lashing ties 14 Non-Releasable ties 13 Releasable ties 13 Cable Clips 14 Cable Mounts 13-14 Cable Cleats 14 CABLE ASSEMBLIES 8-12 Coaxial Patch Leads 8-12 Mains Leads 8 HAND TOOLS 62 Cable Strippers 62 Crimping tools 62 Cutters 62 Pliers 62 HARDWARE 63-82 Chimney Hardware 70-73 Clamps 68-70 Earthing Rod 75 Fixings 73, 75 Fasteners 77-82 Bright Zinc Plated 77-78 Chemical Black 79-80 Stainless Steel 81-82 Ground supports 63-65, 67 Guying Clamps 65, 67, 69 Guying Supports 71-73 J, U & V Bolts 72-74 Pole Mounting Hardware 63-70 Pulleys, Ropes & Shackles 65, 71-74 Rotators & Rotator Brackets 67 Round Pole Caps 75 Telescopic Pole 76 Tilt Overs 63-66 Wall Brackets 65-67, 71 INTERSERIES ADAPTORS 48-52 Interseries Selection Chart 48 RADIO ACCESSORIES 56-58 Motorola Plug to Plug 58 Mic Plug, Socket & Chassis 56 Kenwood Screws 58 Switchcraft Products 57 3.5 Plug 57 3.5 Socket (Jack) 57 Phone Plug 57 Phono Socket (Jack) 57 RF CONNECTORS 17-46 BNC 17-22 F 23-24 FME 25-26 MINI UHF 27-28 N 29-34 SMA 35-38 SMB 38 TNC 39-42 UHF 43-46 SERVICE AIDS 59-61 Aerosols 59-60 Tape 61 Solda-Mops 61 Heatsink Compound 61 Silicone Grease 61 TERMINALS 54-55 Insulated Crimps 54-55 Brass Tabs 55 11/12 All prices exclude VAT. All information in this publication is accurate. E&OE Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 3

POWER CABLES TWIN CABLES RED & BLACK SINGLE INSULATED. FIG.8 Cores Current (Amps) CSA (²) Stranded No. () Dimensions () Core Colours 100M 152000 2 6 Amps 0.57 2 x 20/0.19 5.6 x 2.8 Red / Black 25.50 152007 2 10 Amps 0.79 2 x 28/0.19 6.0 x 3.0 Red / Black 34.00 152010 2 15 Amps 1.24 2 x 44/0.19 6.6 x 3.3 Red / Black 44.00 152015 2 20 Amps 2.12 2 x 75/0.19 7.6 x 3.8 Red / Black 82.00 152016 2 25 Amps 3.53 2 x 50/0.3 8.4 x 4.2 Red / Black P.O.A. 152017 2 35 Amps 5.65 2 x 80/0.3 9.0 x 4.5 Red / Black 245.50 TWIN CABLES RED & BLACK DOUBLE INSULATED. FLAT TWIN Cores Current (Amps) CSA (²) Stranded No. () Dimensions () Core Colours Sheath Colour 100M 152021 2 10 Amps 1.0 2 x 32/0.20 3.5 x 5.5 Red / Black Black 57.50 152018 2 15 Amps 1.50 2 x 21/0.3 3.8 x 6.6 Red / Black Black 72.98 152019 2 20 Amps 2.0 2 x 28/0.3 3.8 x 6.6 Red / Black Black 98.55 152020 2 30 Amps 3.00 2 x 44/0.3 4.4 x 7.6 Red / Black Black 170.25 MULTICORE UNSCREENED CABLE MULTICORE UNSCREENED CABLE (ROTATOR CABLE) Cores Screen CSA (²) Stranded No. () Dimensions () Core Colours Sheath Colour 100M 152070 7 None 0.70 7 x 22/0.2 9.0 7 Colours Black 91.00 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 4

DEF STAN 61-12 PART 4 SCREENED 7.2.2/36 MULTICORE SCREENED CABLE DEF STAN 61-12 PART 5 SCREENED 16.2.2/36 Cores Screen CSA (²) Stranded No. () O/D () Weight Kg/Km Sheath Colour 100M Screen CSA (²) Stranded No. () O/D () Weight Kg/Km Sheath Colour 100M 7.2.02C 2 Braided 0.22 2 x 7/0.2 3.8 25 Black P.O.A. 7.2.03C 3 Braided 0.22 3 x 7/0.2 4.0 29 Black P.O.A. 7.2.04C 4 Braided 0.22 4 x 7/0.2 4.3 33 Black 62.00 7.2.06C 6 Braided 0.22 6 x 7/0.2 5.6 57 Black 63.66 7.2.08C 8 Braided 0.22 8 x 7/0.2 6.2 66 Black 63.28 7.2.10C 10 Braided 0.22 10 x 7/0.2 6.9 87 Black 78.47 7.2.12C 12 Braided 0.22 12 x 7/0.2 6.9 87 Black P.O.A. 7.2.15C 15 Braided 0.22 15 x 7/0.2 7.6 105 Black 106.55 7.2.18C 18 Braided 0.22 18 x 7/0.2 8.4 115 Black P.O.A. 7.2.20C 20 Braided 0.22 20 x 7/0.2 8.6 124 Black P.O.A. 16.2.02C 2 Braided 0.50 2 x 16/0.2 6.5 71 Black P.O.A. 16.2.03C 3 Braided 0.50 3 x 16/0.2 6.8 82 Black P.O.A. 16.2.04C 4 Braided 0.50 4 x 16/0.2 7.3 97 Black P.O.A. 16.2.06C 6 Braided 0.50 6 x 16/0.2 8.3 130 Black P.O.A. 16.2.08C 8 Braided 0.50 8 x 16/0.2 8.8 152 Black P.O.A. 16.2.12C 12 Braided 0.50 12 x 16/0.2 10.5 202 Black P.O.A. 16.2.18C 18 Braided 0.50 18 x 16/0.2 12.0 270 Black P.O.A. 16.2.25C 25 Braided 0.50 25 x 16/0.2 14.1 350 Black P.O.A. 16.2.36C 36 Braided 0.50 36 x 16/0.2 16.1 475 Black P.O.A. 7.2.25C 25 Braided 0.22 25 x 7/0.2 9.5 153 Black P.O.A. 7.2.36C 36 Braided 0.22 36 x 7/0.2 10.7 207 Black P.O.A. DEF STAN CABLES HAVE THE FOLLOWING CORE COLOURS. 1. Red 7. Brown 13. Red/Blue 19. Yellow/Blue 25. Yellow/Green 31.White/Brown 2. Blue 8. Violet 14. Green/Red 20. White/Blue 26. White/Green 32. Brown/Black 3. Green 9. Orange 15. Yellow/Red 21. Blue/Black 27. Green/Black 33. Grey/Brown 4. Yellow 10. Pink 16. White/Red 22. Orange/Blue 28. Orange/Green 34.Yellow/Violet 5. White 11. Turquoise 17. Red/Black 23. Green/Blue 29. Grey/Green 35. Violet/Black 6. Black 12. Grey 18. Red/Brown 24. Grey/Blue 30. Yellow/Brown 36. White/Violet MULTICORE UNSCREENED SPECIALIST CABLE Cores CSA (²) Stranded No. () O/D () Core Colours Sheath Colour IEC Standards LF-31900707 7 0.75 7 x 0.75 2 7.3 6 x Black (White 1-6) 1 x Green/Yellow Earth Core Grey LSHF IEC 60332-1-2 IEC 60332-3-24C IEC 61034-2 100M 165.00 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 5

50 Ohm COAXIAL CABLES COAXIAL CABLES ORDER CODE VELOCITY % pf/m db / 100M Freq. 450mHz CONDUCTOR DIELECTRIC DIAMETER DIELECTRIC MATERIAL 1ST CONDUCTOR MATERIAL 2ND CONDUCTOR MATERIAL JACKET OVERALL DIAMETER 1M 100M ANT 240 50 84 80.0 17.9 1.42 3.81 Foam PE AI. Tape TC UV PE 6.1 1.45 132.00 ANT 300 50 85 80.4 13.12 1.78 4.83 Foam PE AI. Tape TC UV PE 7.62 1.80 164.00 ANT 400 50 85 80.4 9.05 2.74 7.24 Foam PE AI. Tape TC UV PE 10.30 2.31 210.00 ANT 600 50 87 76.10 5.61 4.47 11.56 Foam PE AI. Tape TC UV PE 14.99 5.83 530.00 CNT 300 50 85 79.1 13.7 1.78 4.83 Foam PE AI. Tape TC P.V.C. 7.62 P.O.A. P.O.A. CNT 400 50 85 78.4 8.8 2.74 7.24 Foam PE Al. Tape TC P.V.C. 10.29 3.52 320.00 LMR 240 50 84 79.4 17.3 1.42 3.81 Foam PE Al. Tape TC P.V.C. 6.10 P.O.A. P.O.A. LMR 400 50 85 78.4 8.8 2.74 7.24 Foam PE Al. Tape TC P.V.C. 10.29 3.52 320.00 LMR 400 - ULTRAFLEX 50 85 78.4 10.7 2.74 7.24 Foam PE Al. Tape TC TPE 10.29 8.69 790.00 LMR 600 50 87 76.8 5.5 4.47 11.56 Foam PE AI. Tape TC P.V.C. 14.99 6.71 610.00 RG 8 MINI 50 67 80 29.0 1.35 3.90 Foam PE C - P.V.C. 6.10 0.54 49.00 RG 58 CU 50 67 102 35.2 0.90 2.95 PE TC - P.V.C. 5.00 0.39 35.00 RG 174 AU 50 67 101 58.5 0.48 1.52 PE TC - P.V.C. 2.70 0.28 25.53 RG 213 U 50 67 101 16.1 2.25 7.25 PE CCA - P.V.C. 10.30 1.32 120.00 RG 213 MIL 50 67 101 16.1 2.25 7.24 PE C - P.V.C. 10.30 1.49 135.00 RG 214 U 50 67 101 16.1 2.25 7.24 PE SC SC P.V.C. 10.80 4.18 380.00 RG 223 U 50 66 100 30.5 0.90 2.95 PE SC SC P.V.C. 5.40 1.38 125.00 RG 316 BU 50 70 95.8 58 0.53 1.53 PTFE SC - FEP 2.50 2.42 220.00 RG 142 U 50 70 95 26 0.94 2.95 PTFE SC SC FEP 4.95 4.95 450.00 RG 400 50 70 98 31 0.98 2.90 PTFE TC TC FEP 5.08 6.85 620.00 RG 178 50 70 95.8 96 0.31 0.86 PTFE SC - FEP 1.80 P.O.A. P.O.A. Listed above are our most popular cables, if the cable you need isn t there please contact us as we could source it for you. 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 6

LSHF COAXIAL CABLES COAXIAL CABLES ORDER CODE VELOCITY % pf/m db / 100M Freq. 450mHz CONDUCTOR DIELECTRIC DIAMETER DIELECTRIC MATERIAL 1ST CONDUCTOR MATERIAL 2ND CONDUCTOR MATERIAL JACKET OVERALL DIAMETER IEC 60332 APPROVED 1M 100M ANT 240 LSHF 50 84 80.03 17.88 1.42 3.81 Foam PE AI. Tape TC LSHF 6.1 N 1.68 153.00 ANT 300 LSHF 50 85 80.36 13.12 1.78 4.83 Foam PE AI. Tape TC LSHF 7.62 N 2.60 236.00 ANT 400 LSHF 50 85 80.36 9.05 2.74 7.24 Foam PE AI. Tape TC LSHF 10.30 Y 3.23 294.00 ANT 600 LSHF 50 87 76.10 5.61 4.47 11.58 Foam PE AI. Tape TC LSHF 14.99 Y 6.51 592.00 ANT 400 LSHF 75 85 170.56 8.53 1.65 7.24 Foam PE AI. Tape TC LSHF 10.29 N 5.86 532.80 ANT 600 LSHF 75 87 167.28 5.25 2.74 11.56 Foam PE AI. Tape TC LSHF 14.99 Y 8.83 803.00 CNT 400 FR 50 85 78.4 8.8 2.74 7.24 Foam PE Al. Tape ZC Non Hal. 10.29 N 4.18 380.00 LMR 400 FR 50 85 78.4 8.8 2.74 7.24 Foam PE Al. Tape ZC Non Hal. 10.29 N P.O.A. P.O.A. LMR 600 FR 50 87 76.8 5.5 4.47 11.56 Foam PE Al. Tape ZC Non Hal. 14.99 N 10.56 960.00 RG 213 UH 50 67 101 16.1 2.25 7.24 PE C - LSHF 10.30 N 2.04 185.00 75 Ohm COAXIAL CABLES ORDER CODE VELOCITY % pf/m db / 100M Freq. 450mHz CONDUCTOR DIELECTRIC DIAMETER DIELECTRIC MATERIAL 1ST CONDUCTOR MATERIAL 2ND CONDUCTOR MATERIAL JACKET OVERALL DIAMETER 1M 100M ANT 400 LSHF 75 85 170.56 8.53 1.65 7.24 Foam PE AI. Tape TC LSHF 10.29 5.86 532.80 ANT 600 LSHF 75 87 167.28 5.25 2.74 11.56 Foam PE AI. Tape TC LSHF 14.99 8.83 803.00 CT 125 75 80 52 11.50 1.25 5.5 Foam PE C. Tape C P.V.C. 8.0 0.79 72.00 RG 59 BU (Black) 75 67 69 25.6 0.58 3.71 PE C - P.V.C. 6.15 0.30 26.77 RG 59 BU (White) 75 67 69 25.6 0.58 3.71 PE C - P.V.C. 6.15 0.31 28.00 RG 6 75 75 55-1.00 4.60 Foam PE Al. Tape C P.V.C. 6.80 0.33 29.50 Listed above are our most popular cables, if the cable you need isn t there please contact us as we could source it for you. 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 7

ASSEMBLED CABLES & COAXIAL CABLE ASSEMBLIES MAINS LEADS 152900 152905 Plug / Fuse Connector 2 Cable Colour Length 13 A Plug / 5A IEC Socket Black 2 Metres 152900 2.95 Schuko Plug IEC Socket Black 2 Metres 152905 2.75 13 A Plug / 13A IEC Socket Black 2 Metres 152907 3.95 13 A Plug / 5A IEC Socket R/A Black 2 Metres 152910 4.21 13 A Plug / 13A 2 x IEC Socket Black 2 Metres 152916 5.75 Schuko Plug 2 x IEC Socket Black 2 Metres 152917 4.25 Schuko Plug C5 Clover Socket Black 2 Metres 152918 4.25 13 A Plug / 5A C5 Clover Socket Black 2 Metres 152920 4.25 13 A Plug / 3A Fig 8. Socket Black 2 Metres 152930 2.95 Schuko Plug Fig 8. Socket Black 2 Metres 152935 1.45 COAXIAL CABLE ASSEMBLIES We manufacture a wide range of coaxial cable assemblies using a variety of coax cable types including RG, RG MIL Spec, LMR (Times Microwave), CNT (Coscope), LSHF, IEC 60332 standard & high quality equivalents offering competitive our full range of cables). Data sheets for the cables are available in the Data Sheet Downloads section at www.barenco.co.uk. reliefs). COMPETITIVE PRICES Our cable assemblies are offered at competitive prices whether you require 1 or 100. Identify your needs from the simple 4 steps detailed on the right & contact us for a same day quotation. QUICK SERVICE We stock large volumes of Coaxial Cables and RF Connectors on site. Dependant on the volume of patch leads required we can dispatch most items within 2-3 working days. ASSEMBLY All our leads are manufactured in house to a high professional standard. As standard our assemblies meet RoSH compliance, however we will manufacture assemblies for non RoSH Compliant industries. All assemblies are 100% continuity tested. Barenco will manufacture cable assemblies for the price of the cable and connectors, with no additional assembly fees... Simply select the connectors ( price), the coaxial cable (1m price to the closest metre rounding up) and the length you require. Using the simple equation below you can work out exactly how much a cable assemblies will cost you from Barenco. CONNECTOR 1 EXAMPLE: BNC PLUG BARREL (170042E) 1.15 ( Price) COAXIAL CABLE + CONNECTOR CABLE & = ASSEMBLY 2 LENGTH + N PLUG RG58 BARREL + 1200 = (170010) + 2.95 + 0.78 = ( Price) + (1m Price rounded up to the closest metre) BNC PLUG, TO N PLUG, RG58 1200 MM 4.88 (Price per cable assembly) 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 8

RG223 MIL SPEC CABLE ASSEMBLIES CABLE ASSEMBLIES - BARREL All cables assemblies are manufactured in house using RG223 Mil Spec coaxial cable, soldered strain reliefs are available at a cost of 0.17 each (please see page 15 for full range). Barenco is able to manufacture a comprehensive range of patch cables & general cable Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042 BNC PLUG 170042 RG223 500 BP05BP223C 3.39 BNC PLUG 170042 BNC PLUG 170042 RG223 600 BP06BP223C 3.52 BNC PLUG 170042 BNC PLUG 170042 RG223 700 BP07BP223C 3.66 BNC PLUG 170042 BNC PLUG 170042 RG223 800 BP08BP223C 3.80 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042 N PLUG 170010B RG223 900 BP09NP223C 5.84 BNC PLUG 170042 N PLUG 170010B RG223 1000 BP10NP223C 5.98 BNC PLUG 170042 N PLUG 170010B RG223 1100 BP11NP223C 6.12 BNC PLUG 170042 N PLUG 170010B RG223 1200 BP12NP223C 6.26 BNC PLUG 170042 N PLUG 170010B RG223 1300 BP13NP223C 6.40 BNC PLUG 170042 N PLUG 170010B RG223 1400 BP14NP223C 6.54 BNC PLUG 170042 N PLUG 170010B RG223 1500 BP15NP223C 6.68 BNC PLUG 170042 N PLUG 170010B RG223 1600 BP16NP223C 6.82 BNC PLUG 170042 N PLUG 170010B RG223 1700 BP17NP223C 6.96 BNC PLUG 170042 N PLUG 170010B RG223 1800 BP18NP223C 7.10 BNC PLUG 170042 N PLUG 170010B RG223 1900 BP19NP223C 7.24 BNC PLUG 170042 BNC PLUG 170042 RG223 900 BP09BP223C 3.94 BNC PLUG 170042 BNC PLUG 170042 RG223 1000 BP10BP223C 4.08 BNC PLUG 170042 BNC PLUG 170042 RG223 1100 BP11BP223C 4.22 BNC PLUG 170042 BNC PLUG 170042 RG223 1200 BP12BP223C 4.36 BNC PLUG 170042 BNC PLUG 170042 RG223 1300 BP13BP223C 4.50 BNC PLUG 170042 BNC PLUG 170042 RG223 1400 BP14BP223C 4.64 BNC PLUG 170042 BNC PLUG 170042 RG223 1500 BP15BP223C 4.78 BNC PLUG 170042 BNC PLUG 170042 RG223 1600 BP16BP223C 4.92 BNC PLUG 170042 BNC PLUG 170042 RG223 1700 BP17BP223C 5.06 BNC PLUG 170042 BNC PLUG 170042 RG223 1800 BP18BP223C 5.20 BNC PLUG 170042 BNC PLUG 170042 RG223 1900 BP19BP223C 5.34 Connector 1 Connector 2 Cable Length 1 + N PLUG 170010B N PLUG 170010B RG223 500 NP05NP223C 7.19 N PLUG 170010B N PLUG 170010B RG223 600 NP06NP223C 7.32 N PLUG 170010B N PLUG 170010B RG223 700 NP07NP223C 7.46 N PLUG 170010B N PLUG 170010B RG223 800 NP08NP223C 7.60 N PLUG 170010B N PLUG 170010B RG223 900 NP09NP223C 7.74 N PLUG 170010B N PLUG 170010B RG223 1000 NP10NP223C 7.88 N PLUG 170010B N PLUG 170010B RG223 1100 NP11NP223C 8.02 N PLUG 170010B N PLUG 170010B RG223 1200 NP12NP223C 8.16 N PLUG 170010B N PLUG 170010B RG223 1300 NP13NP223C 8.30 N PLUG 170010B N PLUG 170010B RG223 1400 NP14NP223C 8.44 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042 N PLUG 170010B RG223 500 BP05NP223C 5.29 BNC PLUG 170042 N PLUG 170010B RG223 600 BP06NP223C 5.42 BNC PLUG 170042 N PLUG 170010B RG223 700 BP07NP223C 5.56 BNC PLUG 170042 N PLUG 170010B RG223 800 BP08NP223C 5.70 N PLUG 170010B N PLUG 170010B RG223 1500 NP15NP223C 8.58 N PLUG 170010B N PLUG 170010B RG223 1600 NP16NP223C 8.72 N PLUG 170010B N PLUG 170010B RG223 1700 NP17NP223C 8.86 N PLUG 170010B N PLUG 170010B RG223 1800 NP18NP223C 9.00 N PLUG 170010B N PLUG 170010B RG223 1900 NP19NP223C 9.14 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 9

RG58 CABLE ASSEMBLIES CABLE ASSEMBLIES - BARREL All cables assemblies are manufactured in house using RG58 coaxial cable, soldered or crimped are available at a cost of 0.17 each (please see page 15 for full range). Barenco is able to manufacture a comprehensive range of patch cables & general cable Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042E N PLUG 170010 RG58 900 BP09NP58C 4.40 BNC PLUG 170042E N PLUG 170010 RG58 1000 BP10NP58C 4.43 BNC PLUG 170042E N PLUG 170010 RG58 1100 BP11NP58C 4.46 BNC PLUG 170042E N PLUG 170010 RG58 1200 BP12NP58C 4.50 BNC PLUG 170042E N PLUG 170010 RG58 1300 BP13NP58C 4.53 BNC PLUG 170042E N PLUG 170010 RG58 1400 BP14NP58C 4.56 BNC PLUG 170042E N PLUG 170010 RG58 1500 BP15NP58C 4.60 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042E BNC PLUG 170042E RG58 500 BP05BP58C 2.47 BNC PLUG 170042E BNC PLUG 170042E RG58 600 BP06BP58C 2.50 BNC PLUG 170042E BNC PLUG 170042E RG58 700 BP07BP58C 2.53 BNC PLUG 170042E N PLUG 170010 RG58 1600 BP16NP58C 4.63 BNC PLUG 170042E N PLUG 170010 RG58 1700 BP17NP58C 4.66 BNC PLUG 170042E N PLUG 170010 RG58 1800 BP18NP58C 4.69 BNC PLUG 170042E N PLUG 170010 RG58 1900 BP19NP58C 4.73 BNC PLUG 170042E BNC PLUG 170042E RG58 800 BP08BP58C 2.56 BNC PLUG 170042E BNC PLUG 170042E RG58 900 BP09BP58C 2.60 BNC PLUG 170042E BNC PLUG 170042E RG58 1000 BP10BP58C 2.63 BNC PLUG 170042E BNC PLUG 170042E RG58 1100 BP11BP58C 2.66 BNC PLUG 170042E BNC PLUG 170042E RG58 1200 BP12BP58C 2.70 BNC PLUG 170042E BNC PLUG 170042E RG58 1300 BP13BP58C 2.73 BNC PLUG 170042E BNC PLUG 170042E RG58 1400 BP14BP58C 2.76 BNC PLUG 170042E BNC PLUG 170042E RG58 1500 BP15BP58C 2.80 BNC PLUG 170042E BNC PLUG 170042E RG58 1600 BP16BP58C 2.83 BNC PLUG 170042E BNC PLUG 170042E RG58 1700 BP17BP58C 2.86 BNC PLUG 170042E BNC PLUG 170042E RG58 1800 BP18BP58C 2.89 BNC PLUG 170042E BNC PLUG 170042E RG58 1900 BP19BP58C 2.93 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170042E N PLUG 170010 RG58 500 BP05NP58C 4.27 BNC PLUG 170042E N PLUG 170010 RG58 600 BP06NP58C 4.30 BNC PLUG 170042E N PLUG 170010 RG58 700 BP07NP58C 4.33 BNC PLUG 170042E N PLUG 170010 RG58 800 BP08NP58C 4.36 Connector 1 Connector 2 Cable Length 1 + N PLUG 170010 N PLUG 170010 RG58 500 NP05NP58C 6.07 N PLUG 170010 N PLUG 170010 RG58 600 NP06NP58C 6.10 N PLUG 170010 N PLUG 170010 RG58 700 NP07NP58C 6.13 N PLUG 170010 N PLUG 170010 RG58 800 NP08NP58C 6.16 N PLUG 170010 N PLUG 170010 RG58 900 NP09NP58C 6.20 N PLUG 170010 N PLUG 170010 RG58 1000 NP10NP58C 6.23 N PLUG 170010 N PLUG 170010 RG58 1100 NP11NP58C 6.26 N PLUG 170010 N PLUG 170010 RG58 1200 NP12NP58C 6.30 N PLUG 170010 N PLUG 170010 RG58 1300 NP13NP58C 6.33 N PLUG 170010 N PLUG 170010 RG58 1400 NP14NP58C 6.36 N PLUG 170010 N PLUG 170010 RG58 1500 NP15NP58C 6.40 N PLUG 170010 N PLUG 170010 RG58 1600 NP16NP58C 6.43 N PLUG 170010 N PLUG 170010 RG58 1700 NP17NP58C 6.46 N PLUG 170010 N PLUG 170010 RG58 1800 NP18NP58C 6.49 N PLUG 170010 N PLUG 170010 RG58 1900 NP19NP58C 6.53 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 10

RG213/U CABLE ASSEMBLIES CABLE ASSEMBLIES - BARREL All cables assemblies are manufactured in house using RG213/U coaxial cable, soldered or Barenco is able to manufacture a comprehensive range of patch cables & general cable Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170051 BNC PLUG 170051 RG213 500 BP05BP213C 6.89 BNC PLUG 170051 BNC PLUG 170051 RG213 600 BP06BP213C 6.99 BNC PLUG 170051 BNC PLUG 170051 RG213 700 BP07BP213C 7.12 BNC PLUG 170051 BNC PLUG 170051 RG213 800 BP08BP213C 7.26 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170051 N PLUG 170012 RG213 900 BP09NP213C 7.79 BNC PLUG 170051 N PLUG 170012 RG213 1000 BP10NP213C 7.92 BNC PLUG 170051 N PLUG 170012 RG213 1100 BP11NP213C 8.05 BNC PLUG 170051 N PLUG 170012 RG213 1200 BP12NP213C 8.18 BNC PLUG 170051 N PLUG 170012 RG213 1300 BP13NP213C 8.32 BNC PLUG 170051 N PLUG 170012 RG213 1400 BP14NP213C 8.45 BNC PLUG 170051 N PLUG 170012 RG213 1500 BP15NP213C 8.58 BNC PLUG 170051 N PLUG 170012 RG213 1600 BP16NP213C 8.71 BNC PLUG 170051 N PLUG 170012 RG213 1700 BP17NP213C 8.84 BNC PLUG 170051 N PLUG 170012 RG213 1800 BP18NP213C 8.98 BNC PLUG 170051 N PLUG 170012 RG213 1900 BP19NP213C 9.11 BNC PLUG 170051 BNC PLUG 170051 RG213 900 BP09BP213C 7.39 BNC PLUG 170051 BNC PLUG 170051 RG213 1000 BP10BP213C 7.52 BNC PLUG 170051 BNC PLUG 170051 RG213 1100 BP11BP213C 7.65 BNC PLUG 170051 BNC PLUG 170051 RG213 1200 BP12BP213C 7.78 BNC PLUG 170051 BNC PLUG 170051 RG213 1300 BP13BP213C 7.92 BNC PLUG 170051 BNC PLUG 170051 RG213 1400 BP14BP213C 8.05 BNC PLUG 170051 BNC PLUG 170051 RG213 1500 BP15BP213C 8.18 BNC PLUG 170051 BNC PLUG 170051 RG213 1600 BP16BP213C 8.31 BNC PLUG 170051 BNC PLUG 170051 RG213 1700 BP17BP213C 8.44 BNC PLUG 170051 BNC PLUG 170051 RG213 1800 BP18BP213C 8.58 BNC PLUG 170051 BNC PLUG 170051 RG213 1900 BP19BP213C 8.71 Connector 1 Connector 2 Cable Length 1 + N PLUG 170012 N PLUG 170012 RG213 500 NP05NP213C 7.66 N PLUG 170012 N PLUG 170012 RG213 600 NP06NP213C 7.79 N PLUG 170012 N PLUG 170012 RG213 700 NP07NP213C 7.92 N PLUG 170012 N PLUG 170012 RG213 800 NP08NP213C 8.06 N PLUG 170012 N PLUG 170012 RG213 900 NP09NP213C 8.19 N PLUG 170012 N PLUG 170012 RG213 1000 NP10NP213C 8.32 N PLUG 170012 N PLUG 170012 RG213 1100 NP11NP213C 8.45 N PLUG 170012 N PLUG 170012 RG213 1200 NP12NP213C 8.58 N PLUG 170012 N PLUG 170012 RG213 1300 NP13NP213C 8.72 N PLUG 170012 N PLUG 170012 RG213 1400 NP14NP213C 8.85 Connector 1 Connector 2 Cable Length 1 + BNC PLUG 170051 N PLUG 170012 RG213 500 BP05NP213C 7.26 BNC PLUG 170051 N PLUG 170012 RG213 600 BP06NP213C 7.39 BNC PLUG 170051 N PLUG 170012 RG213 700 BP07NP213C 7.52 BNC PLUG 170051 N PLUG 170012 RG213 800 BP08NP213C 7.66 N PLUG 170012 N PLUG 170012 RG213 1500 NP15NP213C 8.98 N PLUG 170012 N PLUG 170012 RG213 1600 NP16NP213C 9.11 N PLUG 170012 N PLUG 170012 RG213 1700 NP17NP213C 9.24 N PLUG 170012 N PLUG 170012 RG213 1800 NP18NP213C 9.38 N PLUG 170012 N PLUG 170012 RG213 1900 NP19NP213C 9.51 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 11

CABLE ASSEMBLIES CABLE ASSEMBLIES - TOP HAT COMPRESSION BARREL Barenco is able to manufacture a comprehensive range of patch cables & general 75 Barenco. Connector 1 Connector 2 Cable Type Length 1 + We will quote for any cable assemblies you may require. The following are the cables we generally have in stock. BNC Plug 165110 BNC Plug 165110 RG223 600 BP06BP223 7.52 BNC Plug 165110 BNC Plug 165110 RG223 1200 BP12BP223 8.84 BNC Plug 165110 BNC Plug 165110 RG223 1800 BP18BP223 8.84 Connector 1 Connector 2 Cable Type Length 1 + BNC Plug 165110 N Plug 165010 RG223 600 BP06NP223 8.67 BNC Plug 165110 N Plug 165010 RG223 1200 BP12NP223 9.99 BNC Plug 165110 N Plug 165010 RG223 1800 BP18NP223 9.99 Connector 1 Connector 1 Cable Type Length 1 + N Plug 165010 N Plug 165010 RG223 600 NP06NP223 9.82 N Plug 165010 N Plug 165010 RG223 1200 NP12NP223 11.14 N Plug 165010 N Plug 165010 RG223 1800 NP18NP223 11.14 Connector Connector Boot Colour Cable Type Length 1 + BNC Plug BNC Plug Blue RG59 0.4 M 171004 2.94 BNC Plug BNC Plug Green RG59 0.65 M 171005 2.94 BNC Plug BNC Plug Black RG59 1.0 M 171003 2.94 BNC Plug BNC Plug Black RG59 1.2 M 171000 3.24 BNC Plug BNC Plug Black RG59 1.5 M 171006 3.24 BNC Plug BNC Plug Green RG59 2.0 M 171010 3.24 BNC Plug BNC Plug Black RG59 3.0 M 171015 3.54 BNC Plug BNC Plug Red RG59 5.0 M 171020 4.14 BNC Plug BNC Plug Yellow RG59 10.0 M 171025 5.64 CUSTOM MADE CABLE ASSEMBLIES Barenco is able to manufacture in house a comprehensive range of patch cables & general cable assemblies from our extensive range of connectors & coaxial 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 12

CABLE TIES & ACCESSORIES CABLE TIES (ALL PLASTIC) SCREW FIXING MOUNTS Double shoulder cradle give maximum stability to cables or components. Self locking cable ties from Nylon 66 in both natural & black. Base Size ( A x B) Height (C) Screw Size Natural Black 100 Operating Temperture : - 40 C to + 85 C Flaability : UL94V class 2 Length Width Max Bundle Dia. Min Tensile Strength kg Natural Black 100 100 2.5 20 8.1 170505 170705 0.85 160 2.5 36 8.1 170510 170710 1.36 200 2.5 50 8.1 170515 170715 1.62 140 3.6 30 18.2 170520 170720 1.28 200 3.6 50 18.2 170525 170725 1.83 295 3.6 75 18.2 170530 170730 2.64 160 4.8 36 22.2 170540 170740 1.87 200 4.8 50 22.2 170545 170745 2.09 295 4.8 75 22.2 170550 170750 3.19 370 4.8 100 22.2 170555 170755 4.30 200 7.6 50 54.5 170560 170760 5.28 290 7.6 76 54.5 170565 170765 6.85 370 7.6 105 54.5 170570 170770 7.15 450 8.0 115 79.4 170575 170775 14.04 550 9.0 140 79.4 170580 170780 18.47 762 9.0 190 79.4 170585 170785 24.77 * Please note we keep limited stock of Natural Cable Ties. RELEASABLE TIES (ALL PLASTIC) Releasable cable ties in Nylon 66 in both natural & black Length 23.0 x 15.0 9.0 M5 170650 170885 4.13 LOW PROFILE MOUNTS Max cable tie width 4.8 Base Size ( A x B) Width Max Bundle Dia. Min Tensile Strength kg Natural Black 100 200 4.8 50 22.2 170675 170895 2.55 300 4.8 75 22.2 170680 170900 4.51 370 4.8 100 22.2 170685 170905 5.83 SELF ADHESIVE MOUNTS Base Size Height (C) Height Screw Size Maximum Tie Width Natural Natural Black 170825 170830 Black 100 19.1 x 9.5 5.0 M4 170660 170890 2.85 100 19.0 x 19.0 5.0 3.6 170625 170825 5.62 25.0 x 25.0 7.0 4.8 170630 170830 6.21 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 13

MASONRY MOUNT plugs. Insert into 7 diameter hole. Head Width Head Length LASHING TIES Head Depth Overall Length CABLE TIES & ACCESSORIES Max. Tie Width Black 100 12.5 12.5 7.0 45 9.0 170690 9.48 This range of lashing ties are manufactured from polyamide 12. They have been designed to meet the worst enviromental weather conditions. They have a high and excellent resistance to ultra violet light with a working temperature of - 20ºC to + 80ºC COLOURED STANDARD TIES (ALL PLASTIC) Only available in one size. Length Width Max. Bundle Dia. Min. Tensile Strength kg Colour 100 295 4.8 75 22.2 SILVER 170950 5.32 295 4.8 75 22.2 RED 170955 5.32 295 4.8 75 22.2 YELLOW 170960 5.32 295 4.8 75 22.2 BLUE 170965 5.32 295 4.8 75 22.2 GREEN 170970 5.32 Length Width Max Bundle Dia. Min. Tensile Strength kg Black 100 180 9.0 40 40 170840 8.09 265 9.0 70 40 170845 14.64 360 9.0 100 40 170850 15.19 CABLE CLIP A range of robust plastic cable clips with hardened steel zinc plated masonry nails. Available in White & Black Cable Diameter White Black 100 3.5 152740 152640 1.57 4.0 152745 152645 1.57 5.0 152750 152650 1.79 6.0 152755 152655 1.83 7.0 152760 152660 1.91 10.0 152664 3.06 CABLE CLEAT Standard cable cleat manufactured from low density black polyethylene to suit coaxial cable without crushing. Cable Size Fixing Hole Width Black 7.2-8.0 6.0 15.5 152149 0.12 9.5-10.5 6.0 15.5 152150 0.13 12.0-13.2 6.0 15.5 152151 0.13 HANKING TIE Only available in natural and one size. Head Width Head Length Tie Width Overall Length Max. Tie Width Natural 100 12.0 25.0 6.8 150 36.0 170835 9.36 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 14

BLADE FUSE ( ATQ CAR TYPE) for use in vehical applications although now particularly coon in portable electronics. Fuses are colour coded for ease of identifation. Current Rating Colour BLADE TYPE INLINE FUSEHOLDER Original 3M Scotchlok Self Stripping inline blade fuseholder. Quick and easy to use on cables sizes 0.8-2.0² 20 Amp Maximum Qty 25 1 Amp Black 150438 2.50 2 Amp Grey 150440 2.50 3 Amp Violet 150445 2.50 4 Amp Pink 150450 2.50 5 Amp Tan 150455 2.50 7.5 Amp Brown 150460 2.50 10 Amp Red 150465 2.50 15 Amp Light Blue 150470 2.50 20 Amp Yellow 150475 2.50 25 Amp White 150480 2.50 30 Amp Light Green 150485 2.50 3M product Current Rating Colour Qty 25 20 Amp (max) Blue 150567 17.00 ACCESSORIES BLADE INLINE FUSEHOLDER WITH TAILS Individual blade fuseholder with moulded leads, giving more protection against water and other outside elements. Lead Length 100 each Current Rating Colour 20 Amp (max) Black 150495 0.94 30 Amp (max) Black 150498 1.23 CABLE STRAIN RELIEFS A range of cable strain reliefs suitable for all crimp connectors using either RG58 or RG59 cable. Manufactured in soft PVC & available in most colours. Cable Colour RG58 Black 170490 0.17 RG58 Red 170491 0.17 RG58 Blue 170492 0.17 RG58 Green 170493 0.17 Cable Colour RG59 Black 170495 0.17 RG59 Red 170496 0.17 RG59 Blue 170497 0.17 RG59 Green 170498 0.17 RG59 Yellow 170499 0.17 D.C. T CONNECTORS The 2-4 pole connector when completed is rated at 20 amps. This connector is available in single units or as an assembled kit. 3 pole connector 2 pole connector 160990 160992 2 Pole kit contains the following: 1 x T Male Connector 1 x T Female Connector 2 x Male Terminal 2 x Female Terminal Product Product 4 pole connector 160993 160994 2 Pole - T Male Housing 160990 0.34 2 Pole - T Female Housing 160992 0.34 Assembled Kit 160995 1.02 3 Pole - T Male Housing 161000 0.38 3 Pole - T Female Housing 161005 0.34 Assembled Kit 161010 1.28 Product 161000 161005 161020 161025 4 Pole - T Male Housing 161020 0.38 4 Pole - T Female Housing 161025 0.43 Assembled Kit 161030 1.40 Product Male Terminal 160993 0.09 Female Terminal 160994 0.09 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 15

DURACELL PROCELL BATTERIES BATTERIES batteries are available in AA, AAA, C, D, and 9v sizes, and are manufactured using rigid standards to meet the demands of professional users for durability and longevity. of our Procell batteries delivers exceptional performance with a 7-year freshness guarantee. Procell batteries are also guaranteed to perform under extreme operating temperatures-from-20 to 54 degrees C. Battery Box Qty Box Price AA MN1500 10 3.79 AAA MN2400 10 3.79 C MN1400 10 7.99 D MN1300 10 10.60 9V (PP3) MN1604 10 12.40 AA AAA C D 9V (PP3) MN2400 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 16

PLUG BNC TYPE SERIES RG174, 188, 316 RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 RG213, 214 AIRCELL 7, ANT/CNT/LMR300 ANT/CNT/LMR400, ECOFLEX 10 Pin Crimp Tool 180457 Pin Crimp Tool 180455 165115 165110 165135 165100 / 165100B 168140 168120 RG174, RG188, RG316 RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 170052 170054 / 170054B 170054P / 170054S / 170054T 170042 / 170042E 168100 / 168100B Crimp Tool 180455 168100T / 168100S / 168100P RG59 RG213 Crimp Tool 180455 Crimp Tool 180457 170043E 170051 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 17

PLUG BNC TYPE SERIES STYLE PIN BODY BODY FINISH STYLE PIN BODY BODY FINISH CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE RG213 X X X X 165100 4.35 3.48 RG58 X X X X X 170042E 1.15 0.92 RG214 X X X X 165100B 5.62 4.50 RG59 X X X X X 170043E 1.15 0.92 RG58, 223, 141, 142, 400 X X X X 165110 3.10 2.48 RG213 X X X X X 170051 3.10 2.48 RG174, 188, 316 X X X X 165115 RG58, 223, 141, 142, 400 X X X X 165135 RG58, 141 X X X X X 168100 3.10 2.48 4.72 3.78 1.81 1.45 RG174, 188, 316 X X X X 170052 RG58, 141 X X X X 170054 RG223, 142, 400 X X X X 170054B 2.13 1.70 2.95 2.28 3.25 2.60 RG142, 223, 400 X X X X X 168100B 1.81 1.45 SR35 X X X X 170054P 3.45 2.76 SR35 X X X X X 168100P 2.31 1.85 RG178, 196 X X X X 170054T 3.45 2.76 RG174, 188, 316 X X X X X 168100S 2.31 1.85 RG174, 188, 316 X X X X 170054S 3.45 2.76 RG178, 196 X X X X X 168100T 2.31 1.85 ANT/CNT/LMR400 ECOFLEX 10 X X X X X 168120 7.95 6.36 AIRCELL 7 ANT/CNT/LMR300 X X X X X 168140 5.25 4.20 RG223 X X X X X 170042 1.35 1.08 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 18

LINE SOCKETS (JACKS) BNC TYPE SERIES STYLE PIN BODY BODY FINISH RG58, 141, 142, 223, 400 RG213, 214 RG58, 141, 142, 223, 400 CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE RG213, 214 X X X X 165105 RG58, 223, 141, 142, 400 X X X X 165120 RG58, 141 X X X X X 168105 4.40 3.52 2.95 2.36 2.50 2.00 Crimp Tool 180455 165120 165105 168105 / 168105B RG142, 223, 400 X X X X X 168105B 2.50 2.00 RG 174, 178, 188, 196, 316, SR35 RG58, 141, 142, 223, 400 RG 174, 178, 188, 196, 316, SR35 SR35 X X X X X 168105P 3.00 2.40 RG174, 188, 316 X X X X X 168105S 3.00 2.40 RG178, 196 X X X X X 168105T RG58, 141 X X X X X 170046 RG223, 142, 400 X X X X X 170046B 3.00 2.40 1.80 1.44 2.20 1.76 Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 168105T / 168105S / 168105P 170046 / 170046B 170046P / 170046S / 170046T SR35 X X X X X 170046P 2.20 1.76 RG59 RG179 RG174, 188, 316 X X X X X 170046S 2.20 1.76 RG178, 196 X X X X X 170046T 2.20 1.76 RG59 X X X X 170047 RG179 X X X X 170047T 2.30 1.85 2.30 1.85 Crimp Tool 180455 Crimp Tool 180455 170047 170047T 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 19

BULKHEAD SOCKETS (SINGLE HOLE) BNC TYPE SERIES CABLE STYLE PIN BODY BODY FINISH STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 RG 174, 178, 188, 196, 316, SR35 RG58, 141, 142, 223, 400 X X X X 165125 RG58, 141 X X X X X 165127 RG223, 142, 400 X X X X X 165127B 2.70 2.16 3.30 2.64 3.70 2.96 Crimp Tool 180455 165125 165127 / 165127B 165127P / 165127S / 165127T SR35 X X X X X 165127P RG174, 188, 316 X X X X X 165127S 3.70 2.96 3.70 2.96 5 Thread Solder Spill RG178, 196 X X X X X 165127T 3.70 2.96 5 Thread Solder Spill X X X 170058/05 2.40 1.92 170058/05 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 20

BNC TYPE SERIES PANEL SOCKETS (4 HOLE FIXING) STYLE PIN BODY BODY FINISH Solder Spill 4 Hole CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE SOLDER SPILL 4 HOLE X X X 170050 1.75 1.40 170050 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 21

BNC TYPE SERIES WITHIN SERIES DESCRIPTION ORDER CODE BNC DUST CAP WITH CHAIN NICKEL FINISH 165530 1.45 1.16 BNC COUPLER INLINE, F/F NICKEL FINISH 170060 1.85 1.48 BNC COUPLER INLINE, M/M NICKEL FINISH 170065 2.45 1.96 BNC T - CONNECTOR, F/M/F NICKEL FINISH 170070 BNC RIGHT ANGLE, M/F NICKEL FINISH 170080 2.85 2.28 2.45 1.96 165530 170060 170065 170097 1.49 170070 170080 170097 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 22

F TYPE SERIES PLUG DESCRIPTION ORDER CODE F INLINE PLUG TWIST ON MF100 NICKEL FINISH 170230 0.51 0.41 SNAP-SEAL F TYPE CONNECTOR RG6 NICKEL FINISH 170242 1.00 SNAP-SEAL TOOL FOR RG6 180465 30.00 ROTARY COAXIAL CABLE STRIPPER RG6 HT332 9.95 170230 170242 180465 HT332 BULKHEAD SOCKETS (SINGLE HOLE) DESCRIPTION ORDER CODE Solder Spill 1 Hole F BULKHEAD MOUNTED SOCKET NICKEL FINISH 170237 0.45 0.36 170237 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 23

F WITHIN SERIES F TYPE SERIES DESCRIPTION ORDER CODE F COUPLER, F/F BULKHEAD MOUNTED NICKEL FINISH 170235 F COUPLER INLINE, M/M NICKEL FINISH 170236 0.56 0.45 1.56 1.25 F RIGHT ANGLE COUPLER, M/F NICKEL FINISH 170244 1.68 1.34 F BULKHEAD MOUNTED SOCKET NICKEL FINISH 170246 0.81 170235 170236 170244 170246 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 24

PLUG FME TYPE SERIES CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 RG58, 141 X X X X X 170185 2.34 1.87 RG142, 223, 400 X X X X X 170185B 2.74 2.19 RG174, 188, 316 X X X X X 170185S 2.84 2.27 Crimp Tool 180455 Crimp Tool 180455 RG178, 196 X X X X X 170185T SR35 X X X X X 170185P 2.84 2.27 2.84 2.27 170185 / 170185B 170185T / 170185S / 170185P 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 25

LINE SOCKETS (JACKS) FME TYPE SERIES CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 RG174, 188, 316 RG58, 141 X X X X X 170180 2.06 1.65 RG142, 223, 400 X X X X X 170180B SR35 X X X X X 170180P RG174, 188, 316 X X X X X 170180S 2.46 1.97 2.56 2.05 2.56 2.05 Crimp Tool 180455 Crimp Tool 180455 170180 / 170180B 170180T / 170180S / 170180P Crimp Tool 180455 170181 RG178, 196 X X X X X 170180T 2.56 2.05 RG174, 188, 316 X X X X X 170181 1.81 1.45 FME WITHIN SERIES DESCRIPTION ORDER CODE FME COUPLER INLINE, M/M NICKEL FINISH 170183 FME COUPLER INLINE, F/F NICKEL FINISH 170184 2.25 1.80 2.63 2.10 170183 170184 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 26

PLUG MINI UHF TYPE SERIES CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 RG58, 141 X X X X 170175 1.75 1.40 RG223, 142 X X X X 170175B SR35 X X X X 170175P RG174, 188, 316 X X X X 170175S 2.15 1.72 2.25 1.80 2.25 1.80 Crimp Tool 180455 170175 / 170175B Crimp Tool 180455 170175T / 170175S / 1701775P RG178, 196 X X X X 170175T 2.25 1.80 LINE SOCKETS (JACKS) CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG174, 178, 188, 196, 316, SR35 RG58, 141 X X X X 170177 1.77 1.42 RG223, 142, 400 X X X X 170177B 2.28 1.82 Crimp Tool 180455 Crimp Tool 180455 SR35 X X X X 170177P RG174, 188, 316 X X X X 170177S 2.28 1.82 2.28 1.82 170177 / 170177B 170177T / 170177S / 170177P RG178, 196 X X X X 170177T 2.28 1.82 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 27

MINI UHF TYPE SERIES MINI UHF WITHIN SERIES DESCRIPTION ORDER CODE MINI UHF COUPLER INLINE, F/F NICKEL FINISH 170178 MINI UHF COUPLER INLINE, M/M NICKEL FINISH 170179 2.00 1.60 2.00 1.60 170178 170179 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 28

PLUG N TYPE SERIES RG174, 188, 316 RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 AIRCELL 7, ANT/CNT/LMR300 AIRCELL 7, ANT/CNT/LMR300 RG213, 214 Pin Crimp Tool 180457 Pin Crimp Tool 180455 165005 165010 165080 168050 168060 168040 RG213, 214, ANT/CNT/LMR400, ECOXFLEX 10 RG213, 214, ANT/CNT/LMR400, ECOXFLEX 10 ANT/CNT/LMR400, ECOXFLEX 10 ANT/CNT/LMR400, ECOXFLEX 10 ANT/CNT/LMR600, ECOFLEX 15 RG58, 141, 142, 223 Pin Crimp Tool 180457 Pin Crimp Tool 180455 Crimp Tool 180455 165000 / 165000W 165070 / 165070B 1001652 168070 168000 170010 / 170010B RG174, 178, 188, 196, 316, 400, SR35 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG213 RG213 Crimp Tool 180455 170010T / 170010S / 170010P Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180457 170013 / 170013B 170013T / 170013S / 170013P Crimp Tool 180457 170012 165075 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 29

PLUG STYLE PIN BODY BODY FINISH N TYPE SERIES STYLE PIN BODY BODY FINISH CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE CNT/LMR400 ECOFLEX 10 X X X X 1001652 9.40 7.50 AIRCELL 7 LMR300 X X X X X 168050 5.25 4.20 RG213, 214 X X X X 160820 6.20 4.95 AIRCELL 7 LMR300 X X X X 168060 7.50 6.00 RG213, 214 X X X X 160822 13.88 11.10 CNT/LMR400 ECOFLEX 10 X X X X X 168070 7.95 6.36 RG213, 214 X X X X 165000 4.45 3.55 RG58, 141 X X X X X 170010 2.95 2.36 CNT/LMR400 ECOFLEX 10 X X X X 165000W 4.90 3.90 RG223, 142, 400 X X X X X 170010B 3.25 2.60 RG174, 188, 316 X X X X 165005 RG58, 141, 142, 223, 400 X X X X 165010 RG214 X X X X 165070 ANT/CNT/ LMR400, RG213 ECOFLEX 10 X X X X 165070B RG213 X X X X 165075 RG58, 141, 142, 223, 400 ECOFLEX 15 LMR600 X X X X 165080 X X X X X 168000 RG213, 214 X X X X X 168040 6.05 5.45 4.25 3.40 6.95 5.56 6.95 5.56 5.65 4.52 11.70 9.40 11.00 8.80 4.81 3.85 SR35 X X X X X 170010P RG174, 188, 316 X X X X X 170010S RG178, 196 X X X X X 170010T RG213 X X X X X 170012 RG58, 141 X X X X 170013 RG223, 142, 400 X X X X 170013B SR35 X X X X 170013P RG174, 188, 316 X X X X 170013S RG178, 196 X X X X 170013T 3.45 2.76 3.45 2.76 3.45 2.76 3.50 2.80 4.70 3.75 5.10 4.10 5.20 4.16 5.20 4.16 5.20 4.16 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 30

N TYPE SERIES LINE SOCKETS (JACKS) CABLE STYLE PIN BODY BODY FINISH STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG213, 214, ANT/CNT/LMR400 ECOFLEX 10 ANT/CNT/LMR400, ECOFLEX 10 RG213, 214 X X X X 165020 4.45 3.55 CNT/LMR400 ECOFLEX 10 RG58, 141, 142, 223, 400 X X X X 165020W X X X X 165030 5.45 4.36 4.25 3.40 Pin Crimp Tool 180457 165030 165020 / 165020W 168075 ECOFLEX 15 LMR600 X X X X X 168010 11.00 8.80 ANT/CNT/LMR600, ECOFLEX 15 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 CNT/LMR400 ECOFLEX 10 X X X X X 168075 7.95 6.36 RG58, 141 X X X X X 170026 2.50 2.00 RG223, 142, 400 X X X X X 170026B 3.00 2.40 Pin Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 SR35 X X X X X 170026P RG174, 188, 316 X X X X X 170026S RG178, 196 X X X X X 170026T 3.00 2.40 3.00 2.40 3.00 2.40 168010 170026 / 170026B RG213 170026T / 170026S / 170026P RG213 X X X X X 170027 3.70 2.96 Crimp Tool 180457 170027 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 31

N TYPE SERIES PANEL SOCKETS (4 HOLE FIXING) STYLE PIN BODY BODY FINISH Solder Spill RG213, 214 RG402 - Push Fit CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE SOLDER SPILL X X X 0503593 SOLDER SPILL X X X 160825 RG213 X X X X X 165025 RG214 X X X X X 165025B 8.10 6.47 4.45 3.56 5.95 4.80 6.45 5.30 Pin Crimp Tool 180457 160825 165025 / 165025B 165027 Solder Spill RG58, 141, 142, 223, 400 RG58, 141, 142, 223 RG402 X PUSH FIT X 165027 6.10 5.05 SOLDER SPILL X X X 165040 4.45 3.56 RG58, 141, 142, 223, 400 X X X X 165050 5.50 4.40 Crimp Tool 180455 RG58, 141, 142, 223, 400 X X X X 165055 5.10 4.05 165040 165050 / 165055 170008 / 170008B RG58, 141 X X X X X 170008 RG223, 142 X X X X X 170008B 3.55 2.85 3.95 3.25 RG174, 178, 188, 196, 316, 400, SR35 Solder Spill SR35 X X X X X 170008P 4.05 3.25 RG174, 188, 316 X X X X X 170008S 4.05 3.25 RG178, 196 X X X X X 170008T 4.05 3.25 170008P / 170008S / 17008T 0503593 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 32

BULKHEAD SOCKETS (SINGLE HOLE) N TYPE SERIES CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG174, 188, 316 RG213, 214 RG58, 141, 142, 223, 400 X X X X 165032 5.66 4.53 RG174, 188, 316 X X X X 165034 4.70 3.76 Crimp Tool 180456 RG213, 214 X X X X 165035 6.95 5.60 165032 165034 165035 RG58, 141 X X X X 165036 RG223, 142, 400 X X X X 165036B 3.10 2.48 3.55 2.84 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG58, 141, 142, 223 SR35 X X X X 165036P 3.55 2.84 RG174, 188, 316 X X X X 165036S 3.55 2.84 RG178, 196 X X X X 165036T RG58, 141 X X X X 165038 3.55 2.84 5.63 4.50 Crimp Tool 180455 Crimp Tool 180455 165036 / 165036B 165036T / 165036S / 165036P 165038 / 165038B RG223, 142, 400 X X X X 165038B SR35 X X X X 165038P 5.63 4.50 5.63 4.50 RG174, 178, 188, 196, 316, 400, SR35 1 HOLE RG174, 188, 316 X X X X 165038S 5.63 4.50 RG178, 196 X X X X 165038T 1 HOLE X X X 170005 5.63 4.50 2.75 2.20 165038P / 165038S / 165038T 170005 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 33

N WITHIN SERIES N TYPE SERIES DESCRIPTION ORDER CODE N COUPLER, F/F, 4 HOLE PANEL NICKEL FINISH 160827 5.50 4.40 N DUST CAP WITH CHAIN NICKEL FINISH 165540 2.20 1.76 N T - CONNECTOR, F/M/F NICKEL FINISH 170000 4.75 3.80 160827 165540 170000 N RIGHT ANGLE, M/F NICKEL FINISH 170015 3.75 3.00 N T - CONNECTOR, F/F/F NICKEL FINISH 170020 5.25 4.20 N COUPLER, F/F BULKHEAD MOUNTED NICKEL FINISH 170023 5.50 4.40 N COUPLER INLINE, F/F NICKEL FINISH 170025 N COUPLER INLINE, M/M NICKEL FINISH 170030 2.95 2.36 2.75 2.20 170015 170020 170023 170038 4.70 3.76 N RIGHT ANGLE, M/F WHITE BRONZE FINISH 0503113 8.70 6.95 170025 170030 170038 0503113 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 34

PLUG SMA TYPE SERIES AIRCELL 7, ANT/CNT/LMR300 ANT/CNT/LMR400, ECOFLEX 10 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 Pin Crimp Tool 180457 Pin Crimp Tool 180457 Crimp Tool 180457 Crimp Tool 180457 Crimp Tool 180457 Crimp Tool 180457 168320 168300 170187 / 170187B 170187T / 170187S / 170187P 170186 / 170186B 170186T / 170186S / 170186P RG174, 188, 316 RG174, 188, 316 RG178, 196 RG58, 141, 142, 223 REVERSE PIN RG174, 178, 188, 196, 316, 400, SR35 REVERSE PIN Crimp Tool 180456 Crimp Tool 180456 Crimp Tool 180454 Crimp Tool 180457 Crimp Tool 180457 170198 170199 170189 170166 / 170166B 170166P / 170166S / 170166T 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 35

PLUG STYLE PIN BODY BODY FINISH SMA TYPE SERIES STYLE PIN BODY BODY FINISH CABLE CNT/LMR400 ECOFLEX 10 AIRCELL 7 LMR300 STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE X X X X X 168300 X X X X X 168320 RG58, 141 X X X X X X 170166 RG223, 142, 400 X X X X X X 170166B SR35 X X X X X X 170166P RG174, 188, 316 X X X X X X 170166S RG178, 196 X X X X X X 170166T RG58, 141 X X X X 170186 RG223, 142 X X X X 170186B 5.95 4.76 4.25 3.40 4.95 3.96 4.95 3.96 4.95 3.96 4.95 3.96 4.95 3.96 3.75 3.00 3.75 3.00 CABLE STRAIGHT ELBOW REVERSE PIN SOLDER ORDER CODE RG223, 142 X X X X X 170187B TOP HAT CLAMP SR35 X X X X X 170187P RG174, 188, 316 X X X X X 170187S RG178, 196 X X X X X 170187T RG178, 196 X X X X 170189 RG174 RG188 RG316 RG174 RG188 RG316 X X X X X 170198 X X X X 170199 GOLD NICKEL SILVER WHITE BRONZE 2.95 2.36 3.05 2.44 3.05 2.44 3.05 2.44 6.00 4.80 4.50 3.60 3.75 3.00 SR35 X X X X 170186P 4.25 3.40 RG174, 188, 316 X X X X 170186S 4.25 3.40 RG178, 196 X X X X 170186T 4.25 3.40 RG58, 141 X X X X X 170187 2.55 2.05 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 36

SMA TYPE SERIES LINE SOCKETS (JACKS) CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223 REVERSE PIN RG174, 178, 188, 196, 316, 400, SR35 REVERSE PIN RG58, 141, 142, 223 Also Bulkhead RG58, 141 X X X X X X 170168 4.95 3.96 RG223, 142, 400 X X X X X X 170168B SR35 X X X X X X 170168P RG174, 188, 316 X X X X X X 170168S 4.95 3.96 4.95 3.96 4.95 3.96 Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180455 170168 / 170168B 170168P / 170168S / 170168T 170193 / 170193B RG178, 196 X X X X X X 170168T RG58, 141 X X X X X 170193 RG223, 142, 400 X X X X X 170193B 4.95 3.96 2.75 2.20 2.75 2.20 RG174, 178, 188, 196, 316, 400, SR35 Also Bulkhead SR35 X X X X X 170193P 2.75 2.20 RG174, 188, 316 X X X X X 170193S 2.75 2.20 RG178, 196 X X X X X 170193T 2.75 2.20 Crimp Tool 180455 170193P / 170193S / 170193T 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 37

BULKHEAD SOCKETS (SINGLE HOLE) SMA TYPE SERIES STYLE PIN BODY BODY FINISH RG174, 188, 316 RG174, 188, 316 CABLE STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG174, 188, 316 X X X X X 170188/08 5.85 4.68 Crimp Tool 180456 Crimp Tool 180456 RG174, 188, 316 X X X X X 170188/11 5.85 4.68 170188/08 170188/11 SMA WITHIN SERIES DESCRIPTION ORDER CODE SMA COUPLER INLINE, F/F GOLD FINISH 170195 2.23 1.78 170195 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 38

PLUG SMB TYPE SERIES STYLE PIN BODY BODY FINISH RG174, 188, 316 CABLE STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG174, 188, 316 X X X X 170165 2.85 2.25 Crimp Tool 180456 170165 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 39

PLUG TNC TYPE SERIES RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 AIRCELL 7, ANT/CNT/LMR300 RG213, 214 ANT/CNT/LMR400, ECOFLEX 10 RG58, 141, 142, 223 Pin Crimp Tool 180457 Pin Crimp Tool 180457 Crimp Tool 180455 165300 170207 168440 170220 / 170220B 168420 168400 / 168400B RG174, 178, 188, 196, 316, 400, SR35 RG174, 178, 188, 196, 316, SR35 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG174, 188, 316 RG58, 141, 142, 223, 400 REVERSE PIN Crimp Tool 180455 168400P / 168400S / 168400T Crimp Tool 180455 170201P / 170201S / 170201T Crimp Tool 180455 Crimp Tool 180455 Crimp Tool 180456 Crimp Tool 180455 170203 / 170203B 170203P / 170203S / 170203T 170204 165310 / 165310B RG58, 141, 142, 223, 400 RG58, 141, 142, 223, 400 REVERSE PIN RG213, 214, ANT/CNT/ LMR400, ECOFLEX 10 Crimp Tool 180455 Crimp Tool 180455 165310 / 165310B 170201 / 170201B 170206 / 170206B 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 40

PLUG TNC TYPE SERIES STYLE PIN BODY BODY FINISH STYLE PIN BODY BODY FINISH CABLE STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE CABLE STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 X X X X 165300 2.50 2.00 RG223, 142, 400 X X X X 170201B 7.66 6.15 RG58, 141 X X X X X X 165310 3.70 2.95 SR35 X X X X 170201P 8.16 6.53 RG223, 142, 400 X X X X X X 165310B 3.95 3.16 RG174, 188, 316 X X X X 170201S 7.66 6.15 SR35 X X X X X X 165310P 3.95 3.16 RG178, 196 X X X X 170201T 8.16 6.53 RG174, 188, 316 X X X X X X 165310S RG178, 196 X X X X X X 165310T RG58, 141 X X X X X 168400 RG223, 142 X X X X X 168400B SR35 X X X X X 168400P RG174, 188, 316 X X X X X 168400S RG178, 196 X X X X X 168400T ANT/CNT/ LMR400 ECOFLEX 10 AIRCELL 7 ANT/CNT/ LMR300 X X X X X 168420 X X X X X 168440 3.95 3.16 3.95 3.16 2.50 2.00 3.00 2.40 3.00 2.40 3.00 2.40 3.00 2.40 5.95 4.76 4.25 3.40 RG58, 141 X X X X X 170203 RG223, 142, 400 X X X X X 170203B SR35 X X X X X 170203P RG174, 188, 316 X X X X X 170203S RG178, 196 X X X X X 170203T RG174, 188, 316 X X X X X 170204 ANT/CNT/LMR400 ECOFLEX 10 RG213 X X X X 170206 RG214 X X X X 170206B RG58, 141, 142, 223, 400 X X X X 170207 RG213 X X X X 170220 1.85 1.48 2.25 1.80 2.35 1.88 2.35 1.88 2.35 1.88 2.45 1.96 8.55 6.84 8.55 6.84 5.45 4.35 2.45 1.96 RG58, 141 X X X X 170201 7.66 6.15 RG214 X X X X 170220B 3.25 2.60 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 41

LINE SOCKETS (JACKS) TNC TYPE SERIES CABLE STYLE PIN BODY BODY FINISH STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG58, 141 X X X X X 168410 2.50 2.00 RG223, 142, 400 X X X X X 168410B SR35 X X X X X 168410P 2.90 2.32 3.00 2.40 Crimp Tool 180455 168410 / 168410B Crimp Tool 180455 168410T / 168410S / 168410P RG174, 188, 316 X X X X X 168410S 3.00 2.40 RG178, 196 X X X X X 168410T 3.00 2.40 BULKHEAD SOCKETS (SINGLE HOLE) CABLE STYLE PIN BODY BODY FINISH STRAIGHT ELBOW SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG58, 141, 142, 223, 400 X X X X 165330 6.20 4.95 RG58, 141 X X X X 165335 6.20 4.95 RG223, 142, 400 X X X X 165335B 6.50 5.20 Crimp Tool 180455 Crimp Tool 180455 SR35 X X X X 165335P RG174, 188, 316 X X X X 165335S 6.70 5.36 6.70 5.36 165330 165335 / 165335B 165340T / 165340S / 165340P RG178, 196 X X X X 165335T 6.70 5.36 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 42

BULKHEAD SOCKETS (SINGLE HOLE) TNC TYPE SERIES CABLE STRAIGHT STYLE PIN BODY BODY FINISH ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223 RG174, 178, 188, 196, 316, 400, SR35 RG174, 188, 316 RG178, 196 X X X X 165335T 6.70 5.36 RG58, 141 X X X X X 165340 RG223, 142, 400 X X X X X 165340B SR35 X X X X X 165340P 3.30 2.64 3.70 3.04 3.80 3.04 Crimp Tool 180455 Crimp Tool 180455 165340 / 165340B 165340T / 165340S / 165340P Crimp Tool 180456 165345 RG174, 188, 316 X X X X X 165340S 3.80 3.04 RG178, 196 X X X X X 165340T 3.80 3.04 RG174, 188, 316 X X X X 165345 6.20 4.95 TNC WITHIN SERIES DESCRIPTION ORDER CODE TNC COUPLER INLINE, M/M NICKEL FINISH 170208 3.75 3.00 TNC COUPLER BULKHEAD, F/F NICKEL FINISH 170209 4.25 3.40 TNC COUPLER INLINE, F/F NICKEL FINISH 170210 2.85 2.28 170208 170209 170210 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 43

PLUG UHF TYPE SERIES RG58, 141,142, 223, 400 RG213 RG214 AIRCELL 7 ANT/CNT/LMR300 ANT/CNT/LMR400, ECOFLEX 10 ANT/CNT/LMR600, ECOFLEX 15 Pin Crimp Tool 180457 Pin Crimp Tool 180457 Pin Crimp Tool 180455 165410 165420 165422 168240 168210 168200 RG58, 141, 142, 174, 178, 188, 196, 223, 316, 400, SR35 RG58, 141, 142, 174, 178, 188, 196, 223, 316, 400, SR35 RG58, 141 RG8 MINI RG213 RG213 Crimp Tool 180455 170107 / 170107B Crimp Tool 180455 170107P / 170107S / 170107T With PTFE Insulator & Large Braid Solder Slots 170105 170103 170122 170100 RG213 Crimp Tool 180457 170108 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 44

PLUG UHF TYPE SERIES STYLE PIN BODY BODY FINISH STYLE PIN BODY BODY FINISH CABLE STRAIGHT ELBOW SCREW ON SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE CABLE STRAIGHT ELBOW SCREW ON SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 X X X X 165410 3.25 2.60 RG174, 188, 316 X X X X 170107S 2.46 1.97 RG213 X X X X 165420 3.45 2.75 RG178, 196 X X X X 170107T 2.46 1.97 RG214 X X X X 165422 3.95 3.15 RG213 X X X X 170108 2.44 1.95 ECOFLEX 15 ANT/CNT/ LMR600 X X X X X 168200 11.00 8.80 RG213 X X X X X 170122 2.25 1.80 ANT/CNT/ LMR400 ECOFLEX 10 X X X X X 168210 6.95 5.56 AIRCELL 7 ANT/CNT/ LMR300 X X X X X 168240 4.25 3.40 RG213 X X X X X 170100 1.25 1.00 RG8 MINI X X X X 170103 1.45 1.16 RG58, 141 X X X X X 170105 1.15 0.92 RG58, 141 X X X X 170107 1.96 1.57 RG223, 142, 400 X X X X 170107B 2.36 1.89 SR35 X X X X 170107P 2.46 1.97 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 45

UHF TYPE SERIES LINE SOCKETS (JACKS) STYLE PIN BODY BODY FINISH RG58, 141, 142, 223, 400 RG213, 214 RG213 CABLE STRAIGHT ELBOW REVERSE PIN SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE RG58, 141, 142, 223, 400 X X X X 165415 4.75 3.80 RG213 X X X X X 165425 RG214 X X X X X 165425B 4.95 3.96 5.95 4.76 Pin Crimp Tool 180457 Crimp Tool 180457 165415 165425 / 165425B 170109 RG213 X X X X X 170109 4.00 3.20 BULKHEAD SOCKETS (SINGLE HOLE) STYLE PIN BODY BODY FINISH Solder Spill CABLE STRAIGHT ELBOW SCREW ON SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE SOLDER SPILL X X X 170125 1.95 1.56 170125 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 46

UHF TYPE SERIES PANEL SOCKETS (4 HOLE FIXING) STYLE PIN BODY BODY FINISH Solder Spill CABLE STRAIGHT ELBOW SCREW ON SOLDER TOP HAT CLAMP GOLD NICKEL SILVER WHITE BRONZE ORDER CODE SOLDER SPILL X X X 170120 3.25 2.60 170120 UHF WITHIN SERIES DESCRIPTION ORDER CODE UHF COUPLER INLINE, F/F NICKEL FINISH 170130 5.50 4.40 UHF COUPLER INLINE, M/M NICKEL FINISH 170135 2.20 1.76 UHF RIGHT ANGLE, M/F NICKEL FINISH 170140 4.75 3.80 170130 170135 170140 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 47

INTERSERIES ADAPTOR SELECTION CHART Belling Lee Plug Belling Lee Socket BNC Plug BNC Socket F Plug F Socket FME Plug ME Socket Mini UHF Plug Mini UHF Socket N Plug N Socket SMA Plug SMA Socket TNC Plug TNC Socket UHF Plug UHF Socket Belling Lee Plug 170307 170395 170410 170386 170400 Belling Lee Socket 170430 170305 170407 170402 170387 170405 BNC Plug 170307 170305 170065 170315 170480 170287 170310 170262 170285 170292 170290 166705 166005 170302 170300 170340 170295 BNC Socket 170395 170407 170060 170368 170484 170260 170265 170380 170384 166500 166600 170345 170320B 166605 F Plug 170379 170377 166702 170365 170246 170360 170355 170370 170376 170375 F Socket 170410 170402 170315 170368 170235 170250 170270 170390 170388 166125 170330 FME Plug 170480 170484 170183 166225 166525 170481 170485 170483 170486 FME Socket 170287 170184 170489 170346 170333 Mini UHF Plug 170414 170488 170415 166730 166415 170412 170411 Mini UHF Socket 170310 170178 170257 166520 166610 170347 170327 N Plug 170262 170260 170250 166225 170257 170030 170267 166720 166220 170252 166205 166715 170255 N Socket 170285 170265 170270 170025 166510 166620 166105 170275 170335 Phono Plug 170386 170387 170292 170380 170390 160158 170382 170385 Phono Socket 170400 170405 170290 170384 170388 170267 160113 166130 170325 SMA Plug 166705 166500 166525 166520 166720 166510 166710 166505 166725 166515 SMA Socket 166005 166600 170481 170489 166610 166220 166620 170195 166110 166630 166310 166625 TNC Plug 170302 170345 166125 170485 170346 170347 170252 166105 166130 166710 166110 170208 170350 TNC Socket 170300 170483 166205 170275 170382 166505 166630 170210 170323 UHF Plug 170340 170320B 170330 170486 170333 170327 166715 170335 170325 166725 166310 170323 UHF Socket 170295 166605 170255 170385 166515 166625 170350 170130 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 48

INTERSERIES ADAPTOR PRICES PHONO COUPLER F / F PHONO COUPLER M / M BNC PLUG / SMA SOCKET TNC PLUG / N SOCKET TNC PLUG / SMA SOCKET TNC PLUG / F SOCKET 160113 0.21 160158 0.51 166005 2.95 166105 2.95 166110 3.45 166125 P.O.A. TNC PLUG / PHONO SOCKET N PLUG / TNC SOCKET N PLUG / SMA SOCKET N PLUG / FME PLUG UHF PLUG / SMA SOCKET MINI UHF PLUG / SMA SOCKET 166130 P.O.A. 166205 4.11 166220 4.20 166225 3.95 166310 3.45 166415 2.95 SMA PLUG / BNC SOCKET SMA PLUG / TNC SOCKET SMA PLUG / N SOCKET SMA PLUG / UHF SOCKET SMA PLUG / MINI UHF SOCKET SMA PLUG / FME PLUG 166500 2.98 166505 2.95 166510 2.95 166515 3.30 166520 2.85 166525 2.85 BNC SOCKET / SMA SOCKET BNC SOCKET / UHF SOCKET MINI UHF SOCKET / SMA SOCKET N SOCKET / SMA SOCKET SMA SOCKET / UHF SOCKET SMA SOCKET / TNC SOCKET 166600 4.20 166605 2.94 166610 P.O.A. 166620 P.O.A. 166625 P.O.A. 166630 P.O.A. 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 49

INTERSERIES ADAPTOR PRICES BNC PLUG / F PLUG BNC PLUG / SMA PLUG SMA PLUG / TNC PLUG N PLUG / UHF PLUG N PLUG / SMA PLUG SMA PLUG / UHF PLUG 166702 2.34 166705 3.36 166710 P.O.A. 166715 2.77 166720 3.36 166725 3.36 SMA PLUG / MINI UHF PLUG F PUSH ON PLUG / F SOCKET N PLUG / F SOCKET N PLUG / TNC PLUG N PLUG / UHF SOCKET N PLUG / MINI UHF SOCKET 166730 P.O.A. 170246 0.81 170250 2.75 170252 4.10 170255 2.75 170257 2.34 N PLUG / BNC SOCKET N PLUG / BNC PLUG N SOCKET / BNC SOCKET N PLUG / PHONO SOCKET N SOCKET / F SOCKET N SOCKET / TNC SOCKET 170260 2.98 170262 2.98 170265 2.95 170267 2.30 170270 2.90 170275 3.78 BNC PLUG / N SOCKET BNC PLUG / FME SOCKET BNC PLUG / PHONO SOCKET BNC PLUG / PHONO PLUG BNC PLUG / UHF SOCKET BNC PLUG / TNC SOCKET 170285 3.20 170287 P.O.A. 170290 1.48 170292 2.25 170295 1.75 170300 1.79 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 50

INTERSERIES ADAPTOR PRICES BNC PLUG / TNC PLUG BNC PLUG / BELLING LEE SOCKET BNC PLUG / BELLING LEE PLUG BNC PLUG / MINI UHF SOCKET BNC PLUG / F SOCKET UHF PLUG / BNC SOCKET 170302 3.45 170305 2.04 170307 1.66 170310 2.51 170315 1.49 170320 1.49 UHF PLUG / BNC SOCKET UHF PLUG / TNC SOCKET UHF PLUG / PHONO SOCKET UHF PLUG / MINI UHF SOCKET UHF PLUG / F SOCKET UHF PLUG / FME SOCKET 170320B 3.40 170323 P.O.A. 170325 1.23 170327 2.34 170330 1.66 170333 4.38 UHF PLUG / N SOCKET UHF PLUG / BNC PLUG TNC PLUG / BNC SOCKET TNC PLUG / FME SOCKET TNC PLUG / MINI UHF SOCKET TNC PLUG / UHF SOCKET 170335 3.35 170340 2.81 170345 3.40 170346 3.50 170347 1.91 170350 2.04 F PLUG / N SOCKET F PLUG / N PLUG F PLUG / BNC SOCKET F SOCKET / BNC SOCKET F PLUG / PHONO SOCKET F PLUG / UHF SOCKET 170355 2.51 170360 2.72 170365 2.13 170368 1.49 170370 1.28 170375 1.66 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 51

INTERSERIES ADAPTOR PRICES F PLUG / TNC SOCKET F PLUG / BELLING LEE SOCKET F PLUG / BELLING LEE PLUG PHONO PLUG / BNC SOCKET PHONO PLUG / TNC SOCKET BNC SOCKET / PHONO SOCKET 170376 1.40 170377 1.28 170379 1.28 170380 1.49 170382 1.49 170384 1.28 PHONO PLUG / UHF SOCKET PHONO PLUG / BELLING LEE PLUG PHONO PLUG / BELLING LEE SOCKET F SOCKET / PHONO SOCKET PHONO PLUG / F SOCKET BELLING LEE PLUG / BNC SOCKET 170385 1.36 170386 1.66 170387 1.28 170388 1.36 170390 1.40 170395 1.40 BELLING LEE PLUG / PHONO SOCKET BELLING LEE SOCKET / F SOCKET BELLING LEE SOCKET / PHONO SOCKET BELLING LEE SOCKET / BNC SOCKET BELLING LEE PLUG / F SOCKET MINI UHF PLUG / UHF SOCKET 170400 1.19 170402 1.28 170405 1.32 170407 1.28 170410 1.15 170411 2.13 MINI UHF PLUG / TNC SOCKET MINI UHF PLUG / BNC SOCKET MINI UHF PLUG / N SOCKET FME PLUG / BNC PLUG FME PLUG / SMA SOCKET FME PLUG / TNC SOCKET 170412 2.13 170414 2.38 170415 2.26 170480 2.85 170481 2.34 170483 3.19 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 52

INTERSERIES ADAPTOR PRICES FME PLUG / BNC SOCKET FME PLUG / TNC PLUG FME PLUG / UHF PLUG FME PLUG / MINI UHF PLUG FME SOCKET / SMA SOCKET 170484 3.19 170485 2.13 170486 3.36 170488 2.26 170489 3.19 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 53

INSULATED TERMINALS Red Ring Stud Imp. Width 100 Blue Ring Stud Imp. Width 180000 3.0 6BA 5.7 1.91 180040 3.0 6BA 6.6 2.26 100 Yellow Ring 180005 3.5 4BA 5.7 2.09 180045 3.5 4BA 6.6 2.38 180085 3.5 4BA 7.2 3.49 180010 4.0 3BA 6.6 2.25 180050 4.0 3BA 6.6 2.38 180090 4.0 3BA 7.2 3.49 180015 5.0 2BA 8.0 2.26 180055 5.0 2BA 8.5 2.38 180095 5.0 2BA 9.5 4.09 Stud Imp. Width 100 180020 6.0 0BA 11.6 2.77 180060 6.0 0BA 12.0 2.98 180100 6.0 0BA 12.0 4.89 180025 8.0 11.6 3.32 180065 8.0 12.0 3.49 180105 8.0 12.0 5.23 180030 10.0 13.6 4.77 180070 10.0 13.6 4.77 180110 10.0 15.0 6.17 180035 12.0 19.3 5.66 180075 12.0 19.0 7.11 180115 12.0 19.2 7.49 Red Fork Stud Imp. Width 100 Blue Fork Stud Imp. Width 180120 3.0 6BA 5.7 2.51 180145 3.0 6BA 5.7 2.68 100 Yellow Fork 180125 3.5 4BA 6.4 2.26 180150 3.5 4BA 6.4 2.38 180175 3.5 4BA 8.3 4.00 180130 4.0 3BA 7.2 2.26 180155 4.0 3BA 7.2 2.38 180180 4.0 3BA 8.3 3.70 180135 5.0 2BA 9.5 2.26 180160 5.0 2BA 9.5 2.09 180185 5.0 2BA 9.0 3.70 Stud Imp. Width 100 180140 6.0 0BA 12.0 2.77 180165 6.0 0BA 12.0 3.02 180190 6.0 0BA 12.0 5.19 Red Blade 100 Yellow Blade 100 180210 11.0 3.0 2.72 180235 10 2.8 5.35 Red Push On Female Tab Size 100 Blue Push On Female Tab Size 100 Yellow Push On Female Tab Size 100 180290 2.8 x 0.5 2.64 180295 2.8 x 0.8 2.38 180300 4.8 x 0.5 2.81 180315 4.8 x 0.5 3.23 180310 6.3 x 0.8 3.19 180325 6.3 x 0.8 3.62 180335 6.3 x 0.8 4.17 180340 9.5 x 1.2 7.23 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 54

INSULATED TERMINALS Red Push On Male Tab Size 100 Blue Push On Male Tab Size 100 Yellow Push On Male Tab Size 100 180345 6.3 x 0.8 2.64 180350 6.3 x 0.8 3.36 180355 6.3 x 0.8 3.74 Red Push On T.I. Tab Size 100 Blue Push On T.I. Tab Size 100 Yellow Push On T.I. Tab Size 100 180360 2.8 x 0.5 5.19 180365 4.8 x 0.8 4.21 180370 6.3 x 0.8 4.21 180375 6.3 x 0.8 4.21 180380 6.3 x 0.8 6.21 Red Splice Wire Size ² 100 Blue Splice Wire Size ² 100 Yellow Splice Wire Size ² 100 180395 0.5-1.5 2.51 180400 1.35-2.5 2.51 180405 2.5-6.0 4.51 Red Piggy Back Red Bullet Plug Red Bullet Socket Red Pin Tab Size 100 Blue Piggy Back Tab Size 180385 6.3 x 0.8 4.21 180390 6.3 x 0.8 4.89 Bullet Size 100 Blue Bullet Plug Bullet Size 180410 4.0 3.40 180420 5.0 3.62 Bullet Size 100 Blue Bullet Socket Bullet Size 180425 4.0 3.99 180430 5.0 3.89 Pin Size 100 180270 12.0 x 1.9 2.68 100 100 100 BRASS TABS Tab Size 100 180734 Half 90º 4.83 180736 Full Straight 5.43 SELECTION Crimp Selection by Cable Size Stranded Sizes ² Solid Sizes ² Red 0.25-1.65 0.57-1.44 Blue 1.04-2.63 1.14-1.82 Yellow 2.63-6.64 1.82-2.89 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 55

MIC LINE SOCKET RADIO ACCESSORIES MIC LINE PLUG MIC CHASSIS PLUG 2 Way 3 Way 4 Way 5 Way 2 Way 3 Way 4 Way 5 Way 4 Way 5 Way 6 Way 7 Way 8 Way 6 Way 7 Way 8 Way 1 + 25 + 2 Way 160400 1.09 1.21 3 Way 160405 1.09 1.19 4 Way 160410 1.15 1.28 5 Way 160415 1.22 1.36 6 Way 160420 1.49 1.66 7 Way 160425 1.49 1.66 8 Way 160430 1.66 1.79 1 + 25 + 2 Way 160450 2.13 1.92 3 Way 160455 2.21 1.99 4 Way 160460 2.21 1.99 5 Way 160465 2.34 2.11 6 Way 160470 2.47 2.22 7 Way 160475 2.81 2.53 8 Way 160480 2.98 2.68 1 + 25 + 4 Way 160510 1.22 1.15 5 Way 160515 1.36 1.22 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 56

SWITCHCRAFT PRODUCTS PHONO SOCKET FRONT PANEL MOUNT PHONO IN-LINE JACK SHIELDED 10 + Phono Socket Front Panel Mount 3501 FPX 1.30 10 + Phono In-line Jack Shielded 3503 X 2.53 PHONO PLUG SHIELDED 2 conductor shielded RCA straight plug, cable up to 0.203 3.5MM MINI EXTENSION JACK 10 + Phono Plug Shielded 3502 2.14 10 + 3.5 Mini Extension Jack 125 6.20 PHONO PLUG LONG BARREL - NICKEL 2 conductor shielded RCA straight plug, solid pin, cable up to 0.203" (5.16) diameter, solder cup on center. 3.5MM MONO PLUG - BLACK SOLDER 10 + Phono Plug Long Barrel - Nickel 3502 A 1.70 10 + 3.5 Mono Plug - Black Solder 750 3.63 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 57

RADIO ACCESSORIES MOTOROLA PLUG TO PLUG KENWOOD SCREWS 1 + 25 + Motorola Plug to Plug 151698 1.87 1.78 Motorola Plug to Plug Heavy Duty 151699 2.35 2.23 1 + 100+ Kenwood Screw KENSCR 2.75 2.50 2 CORE CURLY CABLES 1 + 100 + 2 Core x 66/0.07 Curly Cable, Black 02BAR160BK 4.75 4.30 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 58

SWITCH CLEANER removes dirt, grease, oil and leaves most plastics or rubber. Nett Contents 200ml. SERVICE AIDS GLASS CLEANER 185 Nett Contents 400ml. FREEZE IT 20 Reduces temperature of components centigrade in about 2 seconds. Nett Contents 200ml & 400ml. 1 + 12 + Switch Cleaner 151905 3.20 2.83 1 + 12 + Glass Cleaner 185 151912 3.78 3.40 1 + 12 + Freeze IT 20-200ml 151915 6.18 5.65 Freeze IT 20-400ml 151916 10.37 9.72 AERO - KLENE A Selective precision cleaning agent Leaves no residue on evaporation. Nett Contents 200ml. WIRE ROPE & CHAIN LUBRICANT affect the performance of the cable. Nett Contents 400ml. FOAM CLEANER remove grease and grime from Nett Contents 400ml 1 + 12 + Aero - Klene 151910 4.75 4.20 1 + 12 + Wire Rope & Chain Lubricant 151914 3.55 3.20 1 + 12 + Foam Cleaner 151920 3.64 3.12 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 59

SUPER 40 4 in 1. Excellent lubricating properties. Displaces moisture giving a protective coating preventing rust and corrosion. Effective penetrating oil. Nett Contents 400ml. SERVISOL SERVICE AIDS ANTI-STATIC SPRAY MIST screens & telephones. Nett Contents 200ml. LABEL REMOVER guide rails & surfaces. on some plastics. Nett Contents 200ml. 1 + 12 + Super 40 151923 4.20 3.78 1 + 12 + Anti-Static Spray Mist 151930 3.40 3.06 1 + 12 + Label Remover 151937 4.89 4.34 SILICONE GREASE Multi-purpose silicone grease spray is invaluable for use on switch contacts and EHT connections. Waterproofs and insulates. Supplied complete with plastic adaptor. Nett Contents 200ml. REFURB 140 Nett Contents 400ml. SPRAY DUSTER 1,000, one second bursts per 200ml. Nett Contents 200ml & 400ml. AERO DUSTER 105 A quick way of removing dust and dirt from inaccessible places. Capacity over 1,000, one non-corrosive and non-toxic. Aluminium container complete with applicator. Nett Contents 400ml. 1 + 12 + Silicone Grease 151925 4.10 3.69 1 + 12 + Refurb 140 151933 4.75 4.30 1 + 12 + Spray Duster - 200ml 151940 5.66 5.10 Spray Duster - 400ml 151942 9.86 8.90 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 60 1 + 12 + Aero Duster 105 151945 11.53 10.38

SILICONE GREASE Nett Contents 50 grams. SERVICE AIDS INSULATING TAPE 1 + 10 + Silicone Grease 151970 3.95 3.56 HEATSINK COMPOUND Nett Contents 25 grams. 1 + 10 + Heatsink Compound 151975 2.60 2.35 SOLDA - MOPS (NO CLEAN) 1.5 and 2.5 gauge both in 1.5 metres. 1 + 10 + Insulating tape 151955 2.10 1.70 SELF AMALGAMATING TAPE and moisture sealing. important features are its excellent electrical properties, strength, 1 + 1.5 x 1.5m 190035 2.84 1 + 10 + Self Amalgamating Tape 151965 6.38 6.06 2.5 x 1.5m 190040 3.10 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 61

5 SIDE CUTTERS Pressed steel side cutters, with open jaw return spring and insulated handles. Length 125. Product 5 Side Cutters 180900 2.78 CABLE CUTTERS (HEAVY DUTY) Compact cable cutters suitable for cutting cables 0.5 2 to 25 2. Features spring return, cushion handles and jaw safety lock. TOOLS PLIER NON INSULATED TOOL Compact, robust crimping tool, suitable for crimping a variety of non insulated terminals. Also features a cable cutter and sprung return. Product Plier Non Insulated Crimp Tool 180896 11.50 RATCHET TOOL Heavy duty ratchet lock pre-loaded control crimp tool for pre-insulated terminals 0.25 2-6.00 2. This tool crimps Red, Blue and Yellow terminals and features simultaneous compression of both conductor and insulation. COAXIAL RATCHET TOOLS Units Crimping Hex Measurements Inches.080.100.429 2.03 2.54 10.90 Product Units Crimping Hex Measurements Ratchet Crimp Tool 180454 38.26 Inches.068.213.256.316 1.72 5.41 6.50 8.10 Product Ratchet Crimp Tool 180455 29.95 Product Cable Cutters (Heavy Duty) 180975 8.50 AUTOMATIC CABLE STRIPPER Automatic cable strippers for cable 0.5 2-6.0 2 also features an adjustable stop for consistency in wire strip lengths and a cable cutter. Product Automatic Cable Strippers 180935 17.45 Product Ratchet Crimp Tool 180450 19.75 RATCHET MODULAR PLIER TOOL Modular crimping pliers which feature a built in cutter and stripper suitable for 4 pin, 6 pin,& 8 pin modular plugs of the type RJ45, RJ12 & RJ11. This tool has a return spring. Body Length 185. Product Ratchet Modular Plier Crimp Tool 400615 16.98 Units Product Units Crimping Hex Measurements Inches.100.128.429 2.54 3.25 10.90 Product Crimping Hex Measurements Inches.068.137.187 1.74 3.48 4.75 Ratchet Crimp Tool 180456 31.91 Ratchet Crimp Tool 180457 31.91 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 62

TILT OVER MAST SUPPORT A special feature of the design is the latch mechanism the securing bolt is tightened. above the ground, provision is made for the mast to be secured to the pivot using 2 x 2 V bolts. BE 102 is for installation on a concrete or similar foundation us ing 4 x 12 sleeve anchors (BE Tilt Over Mast Support BE102 106.72 HARDWARE TILT OVER MAST BASE the more permanent location. bolt and gin pole cap. Tilt Over Mast Base BE103 116.83 PORTABLE MAST BASE time off the air. portable masts are secured Portable Mast Base BE104 46.20 Portable Mast Base (Long) BE104 L 49.20 FREE STANDING SPIDER and arranged to give three leg supports and one vertical. With three lengths of aluminium scaffolding poles inserted base can be secured to a Free Standing Spider BE105 100.54 FLAT ROOF MOUNTING SUPPORT Flat roof mount kit for a 2 pole ( not supplied ). When assembled will require a number of 450 square slabs All fabricated parts are stainless steel. Base is approx. 1 metre square when assembled. Flat Roof Mounting Support BE106 99.00 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 63

BASE TILT SUPPORT HARDWARE MAST GROUND SOCKET BE204 is a simple socket mast support where the need to lower the mast at in frequent intervals. The socket will handle a 2" [50] mast. GROUND SPIKE SHORT TILT SUPPORT The base is drilled for two 0.5" and the upper part with four holes to take two BE 915 2" V bolts. (V bolts sold seperately) Base Tilt Support BE201 33.65 The short tilt support is similar to the BE 201 but, is designed to hold a 2 or 1.5 aluminium mast, to be used in conjunction with a suitable wall bracket to secure the mast in the upright position. Short Tilt Support BE203 32.53 Mast Ground Socket BE204 12.30 DOUBLE SOCKET The double socket is designed to hinge a 2" or 50 mast some distance above the ground. BE 205 has in addition to these excellent qualities the facility to be locked when in the vertical position while the remainder of the supporting system is adjusted and secured. Double Socket BE205 40.45 BE206 Spike Base BE207 Spike Base BE206T Tube Base BE207T Tube Base Ground Spike with Tilt Socket BE206 38.20 Ground Spike with Fixed Socket BE207 22.41 Ground Spike with Tilt Socket BE206T 38.20 Ground Spike with Fixed Socket BE207T 22.41 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 64

GIN-POLE CAP FOR 2 POLE erection and dismantling of a BOLT ON GIN-POLE SOCKET Gin-Pole Cap For 2 Pole (52) BE209 9.00 of up to 2.5 mast. Bolt on Gin-Pole Socket 60 Pole BE210 16.00 2 MAST TO WINCH BRACKET HARDWARE WINCH TO WALL BRACKET not included. We recoend 4 x BE 917/12. line of the rope onto the drum Winch to Wall Bracket BE256 31.40 2 Mast to Winch Bracket BE255 13.48 GALVANIZED STEEL ROPE Price Per 100m Drum Galvanized Rope 3 465 KG BE263 41.75 Galvanized Rope 4 871 KG BE264 45.98 Galvanized Rope 5 1360 KG BE265 50.10 GABLE END BRACKET BE303 (V bolts sold seperately) BE304 Clearance 2.25 - (57) BE303 6.46 Clearance 5.7 - (145) BE304 7.02 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 65

CHANNEL BRACKET Note. All clearances are mast 4 Channel Bracket BE305 8.94 6 Channel Bracket BE306 10.06 PARALLEL TILT OVER BRACKET coaxial cables can be so arranged that there is no need nature of the mast. end of a building ensure aerial Drilled for BE915 not included. Clearance 12 - (310) BE404/12 48.31 Clearance 18 - (460) BE404/18 61.97 HARDWARE WALL BRACKETS application. Constructed from 40 x 40 x 5 angle iron, (V bolts sold seperately) BE401 BE402 K Bracket - 9 (235) BE401/09 18.82 K Bracket - 12 (310) BE401/12 20.50 K Bracket - 18 (460) BE401/18 22.86 K Bracket - 24 (615) BE401/24 26.98 T Bracket - 9 (235) BE402/09 10.89 T Bracket - 12 (310) BE402/12 12.41 T Bracket - 18 (460) BE402/18 13.64 T Bracket - 24 (615) BE402/24 16.65 WALL BRACKET - LIGHT DUTY (V bolts sold seperately) 3 Bracket for 1.5 Mast BE713/03 5.58 6 Bracket for 2 Mast BE713/06 6.20 WALL BRACKET - HEAVY DUTY pair of BE915 V bolts. (V bolts sold seperately) Clearance 2 BE715/02 17.37 Clearance 6 BE715/06 18.33 Clearance 9 BE715/09 19.17 Clearance 12 BE715/12 19.84 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 66

CABLE STAND - OFF BRACKET designed that the cables can be fed in and out BE915 2 V bolt. (V bolts sold seperately) HARDWARE ROTATOR PLATFORM BRACKET (Main mast 2" max.) (GS065) Bolts GROUND GUY STAKES and for securing into concrete. All sizes have a 12.5 Cable Stand - Off Bracket BE502 7.56 Cable Stand - Off Bracket 3 Spiral BE502/3 9.56 MAST BRACE BRACKET Giving a standoff of 10". Rotator Rotator platform (BE465Y Pair) V Bolts 18 Ground Guy Stake BE503 8.46 27 Ground Guy Stake BE504 9.93 36 Ground Guy Stake BE505 11.23 1 X 1 CLAMP Mast to boom clamp. 1" mast to 1" boom. Mast Brace Bracket BE506 23.58 Rotator Platform Bracket (Pair) BE465Y 59.23 Baring Platform Bracket (Top) BE465Y Top 34.65 Yaesu GS-065 Thrust Bearing GS065 47.61 Finish: Plated 1 x 1 Clamp BE601 1.86 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 67

2 X 1 CLAMP Mast to boom clamp. boom. HARDWARE 2 X 1.5 CLAMP Mast to boom clamp. 2 MAST COUPLER 2" x 6" U bolt and three saddles. parallel. Finish: Plated 2 x 1 Clamp BE602 1.98 2 X 1 CLAMP Mast to boom clamp. Finish: Plated 2 x 1 Clamp BE603 2.20 TUBE CLAMP to 1" boom, secured in 90 length of tube and clamped. products are BE955) 2 x 1 Tube Clamp BE604/25 4.91 2 x 1.25 Tube Clamp BE604/32 4.91 Finish: Plated 2 x 1.5 Tube Clamp BE605 3.22 CUSTOM DESIGNED BRACKETS While most aerial systems can be achieved by using the standard brackets available in this catalogue, Barenco offer a design service as well as special manufacturing for those one-off bracket requirements. 2 X 15 SQUARE CLAMP Mast to boom clamp or boom Finish: Plated 2 x 15 Square Clamp BE606 1.52 Finish: Plated 2 Mast Coupler BE610 3.52 CROSS OVER PLATE stainless steel to order. V & U Bolts used on the crossover plates. 2 V Bolt = BE915 2.5 V Bolt = BE957 3 U Bolt = BE947 2 x 2 Cross Over BE611/1 9.13 2 x 2.5 Cross Over BE611/2 9.13 2.5 x 2.5 Cross Over BE611/2.5 9.13 2 x 3 Cross Over BE611/3 9.13 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 68

MAST COUPLERS Finish: Plated 1.5 Mast BE612/A 9.54 2 Mast BE612 11.23 HEAVY DUTY MAST COUPLER Heavy Duty mast coupler to reduce the chance of bending due to overloading. A strengthening bar is seam welded to each plate of a standard mast coupler. The stop facility has not been removed. Both plates have been Galvanized and stainless steel hardware is supplied to give a total maintenance free product. 2 Mast - Heavy Duty BE612HD 25.00 HARDWARE 3 WAY GUY CLAMP (WITH HOOKS) for 1.5" to 2" dia. mast. 3 Way Guy Clamp (With Hooks) BE613 3.93 3 WAY GUY CLAMP (WITH EYES) Single Section BE613/A 8.14 Three Section BE613/B 10.51 4 WAY GUY CLAMP (WITH HOOKS) for 2" dia. mast. 4 Way Guy Clamp (With Hooks) BE614 4.95 4 WAY GUY CLAMP (WITH EYES) for 2 dia. mast. Single Section BE614/A 8.99 Four Section BE614/B 13.93 MAST CLAMP 1.5 Clamp BE941 6.04 2 Clamp BE942 6.79 2 X 1.25 TUBE BOOM CLAMP A mast to boom clamp. Up to 2" mast and bolts. Vertical clamping height of 160. 2 x 1.25 Tube Boom Clamp BE621 12.91 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 69

2 X 1.5 CONTAINER CLAMP found at the top and bottom. Due to clamp for the vertical pole is a tube COLINEAR CLAMP securing 1.25", 1.5" and 2" based colinear stainless steel M8 bolts. 1.5 Corner Clamp BE622/15 20.22 2 Corner Clamp BE622/2 20.22 1.25 Colinear Clamp BE623/125 14.21 1.5 Colinear Clamp BE623/15 14.21 2 Colinear Clamp BE623/2 14.21 HARDWARE FIXED MOBILE MOUNTING BRACKET Giving a 8.5" clearance from frames. Fixed Mobile Mounting Bracket BE624 5.68 SITE CABIN BRACKET With this design of plate it is possible Site Cabin Bracket Complete BE625 19.65 Spare Square Bottom Bolt BE948 1.85 6 CHIMNEY BRACKET Maximum pole diameter of 1.5". CHIMNEY CRADLE 6 Chimney Bracket BE702 6.07 9 CHIMNEY BRACKET aluminium mast. 9 Chimney Bracket BE704 6.80 Chimney Cradle BE705 10.51 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 70

DOUBLE LASHING CHIMNEY BRACKET LASHING CORNER PLATE Large corner plate for lashing protection GALVANIZED LASHING WIRE sold in pairs and aluminium mast. Double Lashing Chimney Bracket BE706 16.06 Lashing Corner Plate BE707 0.22 Galvanized Lashing Wire BE708 1.97 HARDWARE HEAVY DUTY DOUBLE LASHING CHIMNEY BRACKET sold in pairs ornate structure needs to be cleared. Constructed of 40 x 40 x 5 angle iron. Double Lashing Chimney Bracket BE709 21.91 PULLEYS (V bolts sold seperately) 25 Single Sheave Single Eye Pulley BE927/25 3.70 30 Single Sheave Single Eye Pulley BE927/30 4.11 40 Single Sheave Single Eye Pulley BE927/40 5.10 25 Double Sheave Single Eye Pulley BE933/25 5.94 30 Double Sheave Single Eye Pulley BE933/30 6.79 TURNBUCKLES M6 Turnbuckle x 100 BE902/06 2.92 M8 Turnbuckle x 110 BE902/08 4.49 M10 Turnbuckle x 120 BE902/10 6.54 THIMBLES A range of thimbles to accept our range We do not recoend the plastic 4 Wire Thimble BE904/04 0.34 5 Wire Thimble BE904/05 0.40 6 Wire Thimble BE904/06 0.44 8 Wire Thimble BE904/08 0.56 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 71

THIMBLES STAINLESS STEEL A range of thimbles made from stainless steel to complement our range of ropes and cable thimbes are stainless steel rope 3 Thimble Stainless Steel C960/03 0.56 4 Thimble Stainless Steel C960/04 0.66 6 Thimble Stainless Steel C960/06 0.94 8 Thimble Stainless Steel C960/08 1.54 ROPE CLEAT Rope Cleat BE907 6.18 MUNGO BOLT HARDWARE Bolt 8 x 50 CABLE GRIPS, STANDARD Galvanized ropes. Mungo Bolt BE911/08 0.67 3 Cable Grip BE920/3 0.40 5 Cable Grip BE920/5 0.44 6 Cable Grip BE920/6 0.50 8 Cable Grip BE920/8 0.56 2 MAST COUPLER 2" x 6" U bolt and three saddles. Finish: Plated SADDLE CLAMP no. BE610. 2 Mast Coupler BE610 3.52 Saddle Clamp BE919 0.62 SQUARE BOTTOM BOLT 4 Square Bottom Bolt BE948 1.85 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 72

HARDWARE U BOLTS B V BOLTS B C D C D A A Internal Width ( A ) PLEASE NOTE Thread ( B ) Internal Length ( C ) Thread Length ( D ) Inches MM Inches MM Inches MM Stainless Steel (SS) Self coloured. bolts made from stainless steel. 2 51 3/8 Whit 6 152 3.75 95 BE918 1.66 0.75 19 M6 1.75 44 1.25 32 BE944 0.44 1 25 M6 2 51 1.25 32 BE945 0.44 3 76 M10 4 102 1.75 44 BE947 0.84 1.75 44 M6 3 76 1.5 38 BE950 0.50 2 51 M6 3 76 1.5 38 BE951 0.56 1.75 44 M8 3 76 1 25 BE952 0.62 1.25 32 M6 2.5 64 1.5 38 BE954 0.56 2 51 M8 2.75 70 1 25 BE956 0.77 Internal Width ( A ) Thread ( B ) Internal Length ( C ) Thread Length ( D ) Inches MM Inches MM Inches MM 2.25 57 M6 3.75 95 2.5 64 BE912 0.44 2.25 57 M6 3.75 95 2.5 64 BE912 SS 1.55 2.25 57 M8 5 127 4 102 BE913 0.50 1.5 38 M8 2.5 64 1.25 32 BE914 0.44 2 51 3/8 Whit 3.25 83 1.75 44 BE915 0.62 2 51 M10 2.75 70 1.25 32 BE915 SS 2.53 2 51 M8 3 76 2 51 BE955 0.77 2.5 64 M8 4 102 2.5 60 BE957 0.77 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 73

CABLE GRIPS STAINLESS STEEL A range of cable grips made from stainless steel suitable load details. 3 Cable Grip Stainless Steel C961/03 2.24 4 Cable Grip Stainless Steel C961/04 2.57 5 Cable Grip Stainless Steel C961/05 2.76 6 Cable Grip Stainless Steel C961/06 3.14 SNAP HOOK 5 x 50 Snap Hook BE923/50 1.01 6 x 60 Snap Hook BE923/60 1.12 7 x 70 Snap Hook BE923/70 1.40 D SHACKLES QUICK LINK HARDWARE order code is the diameter of the securing pin. grade and carries no safe 5 D Shackle BE924/05 0.56 6 D Shackle BE924/06 0.62 8 D Shackle BE924/08 0.73 10 D Shackle BE924/10 1.18 5 x 50 Quick Link C943/05 1.23 6 x 60 Quick Link C943/06 1.23 7 x 70 Quick Link C943/07 1.52 8 x 80 Quick Link C943/08 1.68 PULLEY MOUNTING BLOCK Pulley Mounting Block BE925 4.21 POLYPROPYLENE ROPE 4 Rope 220m BE910 14.05 6 Rope 220m BE908 19.65 8 x 80 Snap Hook BE923/80 1.68 8 Rope 220m BE909 23.41 1/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 74

J BOLT SCREWBOLT ANCHORS 140 x 3/8 Whit x 90 thread BE916 0.40 and Concrete. Designed and manufactured in the U.K. strength 800N/ 2 ) HARDWARE Screwbolt 6 x 50 HSB06/050 0.61 Screwbolt 6 x 75 HSB06/075 0.85 Screwbolt 6 x 100 HSB06/100 0.94 Screwbolt 8 x 50 HSB08/050 0.61 Screwbolt 8 x 75 HSB08/075 1.08 Screwbolt 8 x 100 HSB08/100 1.17 Screwbolt 10 x 60 HSB10/060 0.70 Screwbolt 10 x 75 HSB10/075 1.68 Screwbolt 10 x 100 HSB10/100 1.83 Screwbolt 10 x 120 HSB10/120 2.10 EYE BOLTS 6 x 50 EYB06/050 1.45 8 x 55 EYB08/055 1.87 10 x 65 EYB10/065 2.34 SCREWBOLTS Listed on this page is a general selection from us as agents for SCREWBOLT HOLE SIZES bolts LESS STRESS CUTS THREAD HARDENED THREAD Will cut into granite and steel. 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 75

HOOK BOLTS HARDWARE SLEEVE ANCHOR ROUND POLE CAPS and 75 being the minimum depths. from sharp tube edges. 6 x 50 HYB06/050 P.O.A. 8 x 55 HYB08/055 P.O.A. 10 x 65 HYB10/065 1.31 EARTHING ROD NOTE Sleeve Anchor. Standard earthing rod 4ft x 3/8 dia, copper coated steel and machined brass cable connector with M8 brass clamp screw and double nut and washer. Note we can supply extra clamps if required. 10 Dia. x 75 BE917/10 1.34 12 Dia. x 70 BE917/12 1.56 7/8 (22) Polished Black BE968 0.35 0.28 1 (25.4) Polished Black BE970 0.46 0.37 1 1/8 (28.6) Polished Black BE973 0.58 0.46 1.25 (32) Polished Black BE975 0.66 0.53 1 3/8 (34) Polished Black BE978 0.79 0.63 1.5 (38) Polished Black BE980 0.86 0.69 2 (50.8) Polished Black BE985 1.40 1.12 Earthing Rod 155555 9.95 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 76

UNIVERSAL TELESCOPIC POLE An ideal mast for temporary situations, such as building sites and short term hire. Designed and produced for tough and demanding applications, they require no maintenance and will not rot or corrode. SPECIFICATIONS LOCKING SYSTEM The tubes are combined with glass reinforced polyamide joints. The lever action of each joint is easy to use and provides a secure lock between each section. Secure double locking system prevents accidental release and over extension. Material Pole Colour Glass Fibre Poles Yellow Tube Extended Length Wall thinkness 6.3 metres 2 Mass Weight 3.5 KG DESCRIPTION ORDER CODE Universal Telescopic Pole (Yellow) BE1863 1 + 10 + 150.00 120.00 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 77

PAN HEAD POZI SELF TAPPER FASTENERS - BRIGHT ZINC PLATED (BZP) Imperial Length Bag Quantity No.4 1/4 100 601000 0.95 No.4 5/16 100 601005 0.95 No.4 3/8 100 601010 1.00 No.4 1/2 100 601015 1.10 No.4 3/4 100 601020 1.35 No.4 1 100 601025 1.80 No.6 1/4 100 601030 1.25 No.6 1/2 100 601045 2.00 No.6 5/8 100 601047 2.30 No.8 3/8 100 601070 1.80 No.8 3/4 100 601080 2.10 No.10 1/2 100 601100 2.40 No.10 3/4 100 601105 3.00 PAN HEAD POZI MACHINE SCREW Metric Length () Bag Quantity M3 8 100 600003 1.25 M4 6 100 600030 1.45 M4 8 100 600032 1.80 M4 10 100 600035 1.85 M4 12 100 600040 1.90 M4 20 100 600050 2.00 Metric Length () Bag Quantity REPAIR WASHER Imperial Bag Quantity M5 12 100 600070 1.80 M5 25 100 600085 2.20 M6 16 100 600100 2.55 1 X 5/16 30 300200 1.00 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 78

NUTS & WASHERS FASTENERS - BRIGHT ZINC PLATED (BZP) Metric Bag Quantity FULL NUT SELF LOCKING NUT M2 100 600601 1.10 600640 8.50 FLAT WASHER SPRING WASHER INTERNAL S/PROOF WASHER M2.5 100 600602 1.00 600645 9.00 600795 2.00 600745 2.20 M3 100 600600 0.90 600650 2.50 600800 0.55 600700 0.50 600750 0.70 M4 100 600605 0.90 600655 2.60 600805 0.60 600705 0.55 600755 1.00 M5 100 600610 1.20 600660 2.80 600810 0.80 600710 0.60 600760 1.10 M6 100 600615 1.40 600665 2.80 600815 0.80 600715 1.00 600765 1.40 M8 50 600620 1.30 600670 POA 600820 0.70 600720 1.40 600770 1.00 M10 50 600625 2.00 600675 POA 600825 1.00 600725 1.75 M12 25 600630 POA 600680 POA 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 79

PAN HEAD POZI SELF TAPPER FASTENERS - CHEMICAL BLACK (BLACK) PAN HEAD POZI MACHINE SCREW Imperial Length Bag Quantity No.4 1/4 100 801000 1.20 No.4 5/16 100 801005 1.20 No.4 3/8 100 801010 1.20 No.4 1/2 100 801015 1.25 No.4 3/4 100 801020 1.50 No.4 1 100 801025 2.10 No.8 1/2 100 300575 3.00 No.8 3/4 100 300580 3.20 No.8 1 100 300585 3.70 No.8 1.5 100 300590 4.95 POZI FLANGE SELF TAPPER Imperial Length Bag Quantity No.6 3/4 100 300110 1.60 No.8 3/8 100 300118 1.80 No.8 1/2 100 300120 2.20 No.8 3/4 100 300130 2.40 No.10 3/4 100 300150 2.60 Metric Length () Bag Quantity PAN HEAD POZI TAPTITE SCREW Metric Length () Bag Quantity M3 6 100 800000 1.65 M2.5 8 100 800002 2.95 M3 8 100 800003 1.85 M3 12 100 800010 2.30 M3 16 100 800015 2.20 M3 20 100 800020 2.10 M3 25 100 800025 2.30 M3.5 12 100 800027 3.00 M4 8 100 800032 1.90 M4 12 100 800040 2.50 M4 20 100 800050 2.50 M4 25 100 800055 4.25 M4 35 100 800062 4.40 M5 25 100 800062 4.60 M6 12 100 800095 4.25 M3 5 100 300250 2.50 M3 8 100 300300 2.70 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 80

NUTS & WASHERS FASTENERS - CHEMICAL BLACK (BLACK) Metric Bag Quantity FULL NUT SELF LOCKING NUT FLAT WASHER SPRING WASHER INTERNAL S/PROOF WASHER M2 100 800601 1.35 800640 9.00 800740 2.10 M2.5 100 800602 1.30 800645 9.50 800795 2.50 800745 2.50 M3 100 800600 1.00 800650 3.10 800800 0.60 800750 0.75 M4 100 800605 1.20 800655 3.20 800805 0.65 800755 1.10 M5 100 800810 1.00 800760 1.40 M6 100 800615 1.50 800665 3.50 800815 1.00 800765 1.50 M8 50 800620 1.80 M10 50 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 81

PAN HEAD POZI SELF TAPPER FASTENERS - STAINLESS STEEL (A2) PAN HEAD SELF TAPPER Imperial Length Bag Quantity No.4 1/2 100 602015 1.50 No.4 5/8 100 602017 1.80 No.4 3/4 100 602020 2.10 No.4 1 100 602025 2.20 No.6 3/8 100 602040 1.80 No.6 1/2 100 602045 2.10 No.6 5/8 100 602047 2.10 No.6 3/4 100 602050 2.70 No.6 1 100 602055 3.00 No.6 1.5 100 602060 3.25 No.8 3/8 100 602070 2.50 No.8 1/2 100 602075 2.50 No.8 5/8 100 602077 3.00 No.8 3/4 100 602080 3.20 No.8 1 100 602085 3.30 No.8 1.5 100 602090 3.80 No.10 3/8 100 602095 2.70 No.10 1/2 100 602100 3.90 No.10 3/4 100 602105 3.95 No.10 1 100 602110 4.80 No.10 1.5 100 602115 5.30 No.12 1/2 100 602120 6.40 No.12 3/4 100 602125 6.65 No.12 1 100 602130 6.75 Imperial Length Bag Quantity PAN HEAD POZI MACHINE SCREW Metric Length () Bag Quantity No.12 1.5 100 602135 6.95 No.14 1/2 100 602140 7.45 No.14 3/4 100 602145 7.50 No.14 1.5 100 602155 8.50 M3 6 100 601800 1.50 M3 10 100 601805 2.40 M4 12 100 601845 3.00 M4 16 100 601850 3.15 M4 25 100 601860 3.45 M4 40 100 601870 3.90 M5 25 100 601900 4.80 M5 40 100 601910 11.13 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 82

NUTS & WASHERS FASTENERS - STAINLESS STEEL (A2) Metric Bag Quantity FULL NUT SELF LOCKING NUT FLAT WASHER SPRING WASHER INTERNAL S/PROOF WASHER M2 100 M2.5 100 M3 100 602600 2.40 602800 0.90 M4 100 602605 1.80 602655 3.25 602705 0.87 M5 100 602610 1.90 602660 3.76 602810 0.90 602710 0.90 M6 100 602615 2.40 602665 4.63 602815 1.30 602715 1.50 602765 2.34 M8 50 602620 2.40 602670 P.O.A 602820 P.O.A 602720 1.35 M10 50 602625 P.O.A 602675 P.O.A 602825 P.O.A M12 25 602630 P.O.A 602680 P.O.A 602830 P.O.A HEX SETS HEX BOLTS Metric Length () Bag Quantity M8 20 50 601570 P.O.A M8 25 50 601575 P.O.A M8 30 50 601580 P.O.A M8 35 50 601582 P.O.A M8 40 50 601585 P.O.A M8 45 50 601588 P.O.A M8 50 50 601590 P.O.A M12 30 25 601665 P.O.A Metric Length () Bag Quantity M8 20 50 602570 P.O.A 11/12 Barenco contact details +44 (0)1949 860400 +44 (0)1949 860773 Sales@barenco.co.uk www.barenco.co.uk 83