Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Feature Front-mounted Patching Switche connect port internally, dramatically reducing the need for patch cord Meet the tranfer impedance tandard requirement Compatible to Shielded Twited Pair (STP) cabling ytem High performance panel that upport Category 6 performance pecification up to 250 MHz Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2 nd CENELEC EN50173 (2002) for Category 6/Cla E. Simple, labor aving aembly and intallation uing Kronee and 110 termination tool Enhanced cable retention fixture Support 48 port, uing 2U of Rack pace Compatible with 22-26 AWG Solid or tranded wire cable High durability and reliability PatchView and non PatchView option edition (2002) and 48 STP Patch Panel Dataheet Page 1 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Feature CLASSix RiT STP Patch Panel are part of the RiT Cabling Sytem, featuring Category 6 performance. The ytem i deigned to Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IECC 11801 2 nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Cla E. PatchView Capability SMART 48 Panel, when ued in conjunction with RiT' PatchView Sytem, can can the wiring center configuration and ubequently report the connectivity tatu Patching information i diplayed at the management tation for cabling management and control LED indicator on panel identify any two port patched together. Extremely ueful for facilitating maintenance in mid-to-large ize wiring center which are over congeted with patch cord Computerized LED-diplay guide the technician in performing Move, Add and Change (MAC) 48 STP Patch Panel Dataheet Page 2 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Decription 48 STP Patch Panel offer an innovative highh quality olution that i made to lat. The robut ytem ignificantly reduce the need for patch cord while exceeding all Category 6 performance requirement. Provide RiT' worldwide-recognized PatchView Technology with a real-timee cabling managemen t ytem. The SMART CLASSix 48 STP Patch Panel conform to t ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2 nd edition (2002) and CENELEC EN50173 (2002)) for Category 6/Cla E. 48 STP Patch Panel Dataheet Page 3 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification Interface Front Interconnection (patch cord ide) 48 eight-poition or nine-poition RJ-45 hielded modular jack. Ue of patch cord with RiT CLASSix RJ-45 plug i recommended. Back Interconnectionn (cabling ide) 48 eight-poition Krone & 110 tool-compatible block; accept a 22 to 26 AWG wire, olid or tranded. Rated forr up to a minimum of 200 re-termination cycle. Note: Termination tool mut be ordered eparately. Interconnection to RiT' PatchView ytem - PV Panel - Two 26-pin header on the back off the panel are ued for connection to the PV or PVMax Scanner. Ue two Group A Scanner Attachment Cord according too the required length. - PVMax Panel - Two 14-pin header on the back of the panel are ued for f connection to the PVMax Scanner. Ue one Group B Scanner Attachment Cord according too the required length - The canning ignal i tranmitted over pin 9 off the RJ-45. Pin 9 exit in nine-poition patch panel model. A pecial patch cord -SMART- Jumper, including an extra wire andd pecial RJ-45 plug i needed. RJ-45 jack and plug deign, uedd for theee Pleaee refer to the PatchView Sytem and the Copper Cable and Cord ection for further detail. 48 STP Patch Panel Dataheet Page 4 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification Indicator (in model adapted to PatchView only) Port identification indicator - 48 red LED. A pair of activated LED identifie connected port. A ingle port can be identified and the correpondingg LED activated by a remote control command from the network management tation. Patching Switche 24 Patching Switche for internal. When witched to "PATCH" poition - upper and lower port are connected.. When witched to "OFF" poition - upper and lower port are diconnected. Eight wire and the ninthh canning wire (when applicable) of each port are imultaneouly witched. The witch i off uperior quality and i qualified per military tandard. 48 STP Patch Panel Dataheet Page 5 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification Electrical Specification Category 6 Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2 nd edition (2002) EN50173 (2002) for Category 6/Cla E. and CENELEC Electrical Specification 48 STP Patch Panel h NEXT ratio plot i hown for wort pair combination. The following are typical NEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 12-36 12-45 12-78 36-45 36-78 45-78 NEXT (db) -60.21-51.29-60.39-53.6-51.77-47.82-48 -46.62-51.19-49.05-46.44-44.15-48.67- -44.31- -47.2-42.3-46.32- -41.07- All pair combination exceed Category 6 requirement. 48 STP Patch Panel Dataheet Page 6 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification ELFEXT ratio plot i hown for wort pair combination. The following are typical ELFEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 12-36 12-45 12-78 36-45 36-78 45-78 ELFEXT (db) -41.78-40.55-52.65-36.5-42.06-43.51-32.95-41.41-24.51-29.54-36.24-34.96-31.64-28.51-28.27-28.16-31.04-35.15 All pair combination exceed Category 6 requirement. Return Lo ratio plot i hown for wort pair. The following are typical Return Lo meaurement reult at 100, 200 and 250 MHz for all pair. Pair 1-2 3-6 4-5 7-8 Return Lo (db)) -21.44-19.62-21.35-18.71-16.66-17.39-16.38-14.95-14.62-15.98-14.96-13.61 All pair exceed Category 6 requirement 48 STP Patch Panel Dataheet Page 7 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification Inertion Lo ratio plot i hown for wort pair. The following are typical meaurement reult at 100, 200 and 250 MHz for all pair. Inertion Lo Pair 1-2 3-6 4-5 7-8 Inertion Lo (db) -16.07-16.95-16.88-15.57-23.34-24.32-24.46-22.42-25.76-27.44-27.16-26.17 All pair exceed Category 6 requirement. Power Sum NEXT ratio plot i hown for wort pair combinatio n. The following are typical Power Sum NEXT meaurement reult at 100, 200 and 250 MHz M for all pair combination. Pair Power Sum NEXT (db) 1-2 3-6 4-5 7-8 -50.31-44.47-41.57-49.22-43.82-40.19-45.48-41.39-37.59-46.18-41.63-39.19 All pair combination exceed Category 6 requirement. 48 STP Patch Panel Dataheet Page 8 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification Power Sum ELFEXT ratio plot i hown for wort pair combination. The following are typical Power Sum ELFEXT meaurement reult at 100, 200 and 250 MHz for all pair combination. Pair 1-2 3-6 4-5 7-8 Power Sum ELFEXT (db) -37.96-34.53-34.48-39.5-23.86-27.31-28.23-23.88-24.45-25.23-24.89-25.88 All pair combination exceed Category 6 requirement. 48 STP Patch Panel Dataheet Page 9 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Specification General Phyical Height: Width: Depth: Retentionn Fixture: Weight: 88.10 mm / 1.76" (2U) 482.6 mm / 19" 56.10 mm / 2.2" 89.10 mm / 3.5" 1.5kg 48 STP Patch Panel Dataheet Material Steel Color Black background with gray ilk creened marking Environment Temperature:-20 to 60 C Humidity: 0-90% non-condening Compliance with International EMC Standard: The STP 48 line of patch panel i deigned to comply with EN-55022, Cla B (Europe) and FCC Part 15, Subpart J, Cla A (USA). Page 10 of 11
Tel Aviv, 69719, 6 Irael 48 STP Patch Panel Ordering Information Number Decription R3241010 STP Panel, 48, Switche R3241014 STP Panel, 48, Switche, PVMax 48 STP Patch Panel Dataheet Page 11 of 11