All types of articles published in Estuaries and Coasts are peer reviewed by at least two reviewers prior to publication.

Estuaries and Coasts GENERAL DESCRIPTION Estuaries and Coasts is the journal of the Coastal and Estuarine Research Federation. Begun in 1977 as Chesapeake Science, the journal has gradually expanded its scope and circulation. Today, the journal publishes manuscripts on ecosystems at the interface between the land and the sea, covering aspects of research on physical, chemical, geological or biological systems, as well as applications to management of those ecosystems. The interface is broadly defined to include estuaries and nearshore coastal waters including lagoons, wetlands, tidal rivers, shorelands and beaches. The journal publishes original research findings, reviews and perspectives, techniques, comments, and management applications. Submissions that are primarily descriptive, strongly place-based, or report on development of models or new methods without detailing their applications fall outside the scope of the journal. All types of articles published in Estuaries and Coasts are peer reviewed by at least two reviewers prior to publication. English Language Manuscripts must be submitted in English. The Editors encourage submissions from all countries. Professional editing services are available to assist preparation of manuscripts by authors whose primary language is not English. Revisions If you are revising your manuscript from an earlier submission to Estuaries and Coasts you must also submit a letter detailing how the revision responds to each reviewer comment and designating lines in the revised manuscript where edits were made. TYPES OF ARTICLES 1. Original Reports of research results typically follow the structure of Title and Author Information, Abstract, Introduction (including research questions and hypotheses), Methods, Results, Discussion, and References. 2. Management Applications papers demonstrate the application of estuarine and coastal research to address contemporary estuarine and coastal management, socioeconomic, and policy issues. The underlying science is expected to be at the level of Original Reports but illustrations and case studies of how it can be used to address real-world problems are the focus. Authors of prospective Management Application submissions are encouraged to contact the Co-Editors-in-Chief to assess whether their manuscript meets this scope. 3. Notes, shorter reports of research results, follow the same structure as original reports of research and management applications. 4. Technical Communications are commentaries on a report previously published in Estuaries and Coasts or elsewhere on a topic of interest to our readers. The author whose work is being discussed is given an opportunity to reply to the Technical Communication. 5. Perspectives in Estuarine and Coastal Science are short papers (maximum 8 printed pages) intended to stimulate discussion of emerging areas of estuarine and coastal research. A maximum of one such paper is published per journal issue (i.e., 6 per year). These papers are solicited by the Co-Editors-in-Chief or

proposed to one of the Co-Editors-in-Chief through pre-submission inquiries by prospective authors. The Perspectives papers are published with free promotional access to the online version. 6. Review Articles are either proposed to, or commissioned by, the Reviews Editor. Prospective authors should contact the ESCO Reviews Editor through the editorial office (estuariesandcoasts@erf.org) before preparing a review manuscript. 7. The H. T. Odum Synthesis Essay is solicited by the Co-Editors-in-Chief and Reviews Editor on an annual basis to provide synthesis and review for an emerging topic of importance to estuarine and coastal science. 8. Book Reviews of new books in estuarine and coastal science are solicited by the Editors. MANUSCRIPT SUBMISSION Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all coauthors, if any, as well as by the responsible authorities tacitly or explicitly at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation. Permissions Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors. Online Submission Please follow the hyperlink Submit online on the right and upload all of your manuscript files following the instructions given on the screen. TITLE PAGE The title page should include: The name(s) of the author(s) A concise and informative title The affiliation(s) and address(es) of the author(s) The e-mail address, telephone and fax numbers of the corresponding author Abstract Please provide an abstract of 150 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references. Keywords Please provide 4 to 6 keywords which can be used for indexing purposes. TEXT Text Formatting

Manuscripts should be submitted in Word. Use a normal, plain font (e.g., 10-point Times Roman) for text. Use italics for emphasis. Use the automatic page numbering function to number the pages. Do not use field functions. Use tab stops or other commands for indents, not the space bar. Use the table function, not spreadsheets, to make tables. Use the equation editor or MathType for equations. Save your file in docx format (Word 2007 or higher) or doc format (older Word versions). Manuscripts with mathematical content can also be submitted in LaTeX. LaTeX macro package (zip, 182 kb) Headings Please use no more than three levels of displayed headings. Abbreviations Abbreviations should be defined at first mention and used consistently thereafter. Footnotes Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables. Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols. Always use footnotes instead of endnotes. Acknowledgments Acknowledgments of people, grants, funds, etc. should be placed in a separate section on the title page. The names of funding organizations should be written in full. REFERENCES Citation Cite references in the text by name and year in parentheses. Some examples: Negotiation research spans many disciplines (Thompson 1990). This result was later contradicted by Becker and Seligman (1996). This effect has been widely studied (Abbott 1991; Barakat et al. 1995; Kelso and Smith 1998; Medvec et al. 1999). Reference list

The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list. Reference list entries should be alphabetized by the last names of the first author of each work. Journal article Alber, John, Daniel C. O Connell, and Sabine Kowal. 2002. Personal perspective in TV interviews. Pragmatics 12: 257 271. Article by DOI Suleiman, Camelia, Daniel C. O Connell, and Sabine Kowal. 2002. If you and I, if we, in this later day, lose that sacred fire... : Perspective in political interviews. Journal of Psycholinguistic Research. doi: 10.1023/A:1015592129296 Book Cameron, Deborah. 1985. Feminism and linguistic theory. New York: St. Martin s Press. Book chapter Cameron, Deborah. 1997. Theoretical debates in feminist linguistics: Questions of sex and gender. In Gender and discourse, ed. Ruth Wodak, 99-119. London: Sage Publications. Online document Frisch, Mathias. 2007. Does a low-entropy constraint prevent us from influencing the past? PhilSci archive. http://philsci-archive.pitt.edu/archive/00003390. Accessed 26 June 2007. Journal names and book titles should be italicized. For authors using EndNote, Springer provides an output style that supports the formatting of in-text citations and reference list. EndNote style (zip, 2 kb) TABLES All tables are to be numbered using Arabic numerals. Tables should always be cited in text in consecutive numerical order. For each table, please supply a table caption (title) explaining the components of the table. Identify any previously published material by giving the original source in the form of a reference at the end of the table caption. Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body. ARTWORK AND ILLUSTRATIONS GUIDELINES Electronic Figure Submission Line Art Supply all figures electronically. Indicate what graphics program was used to create the artwork. For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MSOffice files are also acceptable. Vector graphics containing fonts must have the fonts embedded in the files. Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.

Halftone Art Definition: Black and white graphic with no shading. Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size. All lines should be at least 0.1 mm (0.3 pt) wide. Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi. Vector graphics containing fonts must have the fonts embedded in the files. Definition: Photographs, drawings, or paintings with fine shading, etc. If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves. Halftones should have a minimum resolution of 300 dpi. Combination Art

Color Art Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc. Combination artwork should have a minimum resolution of 600 dpi. Color art is free of charge for online publication. If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent. If the figures will be printed in black and white, do not refer to color in the captions. Color illustrations should be submitted as RGB (8 bits per channel). Figure Lettering To add lettering, it is best to use Helvetica or Arial (sans serif fonts). Keep lettering consistently sized throughout your final-sized artwork, usually about 2 3 mm (8 12 pt). Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label. Avoid effects such as shading, outline letters, etc. Do not include titles or captions within your illustrations. Figure Numbering All figures are to be numbered using Arabic numerals. Figures should always be cited in text in consecutive numerical order. Figure parts should be denoted by lowercase letters (a, b, c, etc.). If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, "A1, A2, A3, etc." Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.

Figure Captions Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file. Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type. No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption. Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs. Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption. Figure Placement and Size Figures should be submitted separately from the text, if possible. When preparing your figures, size figures to fit in the column width. For most journals the figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm. For books and book-sized journals, the figures should be 80 mm or 122 mm wide and not higher than 198 mm. Permissions If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used. Accessibility In order to give people of all abilities and disabilities access to the content of your figures, please make sure that All figures have descriptive captions (blind users could then use a text-to-speech software or a textto-braille hardware) Patterns are used instead of or in addition to colors for conveying information (colorblind users would then be able to distinguish the visual elements) Any figure lettering has a contrast ratio of at least 4.5:1 ELECTRONIC SUPPLEMENTARY MATERIAL Springer accepts electronic multimedia files (animations, movies, audio, etc.) and other supplementary files to be published online along with an article or a book chapter. This feature can add dimension to the author's article, as certain information cannot be printed or is more convenient in electronic form. Before submitting research datasets as electronic supplementary material, authors should read the journal s Research data policy. We encourage research data to be archived in data repositories wherever possible. Submission Supply all supplementary material in standard file formats.

Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author. To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading. Audio, Video, and Animations Aspect ratio: 16:9 or 4:3 Maximum file size: 25 GB Minimum video duration: 1 sec Supported file formats: avi, wmv, mp4, mov, m2p, mp2, mpg, mpeg, flv, mxf, mts, m4v, 3gp Text and Presentations Spreadsheets Submit your material in PDF format;.doc or.ppt files are not suitable for long-term viability. A collection of figures may also be combined in a PDF file. Spreadsheets should be converted to PDF if no interaction with the data is intended. If the readers should be encouraged to make their own calculations, spreadsheets should be submitted as.xls files (MS Excel). Specialized Formats Specialized format such as.pdb (chemical),.wrl (VRML),.nb (Mathematica notebook), and.tex can also be supplied. Collecting Multiple Files Numbering Captions It is possible to collect multiple files in a.zip or.gz file. If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables. Refer to the supplementary files as Online Resource, e.g., "... as shown in the animation (Online Resource 3)",... additional data are given in Online Resource 4. Name the files consecutively, e.g. ESM_3.mpg, ESM_4.pdf. For each supplementary material, please supply a concise caption describing the content of the file. Processing of supplementary files Accessibility Electronic supplementary material will be published as received from the author without any conversion, editing, or reformatting. In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that The manuscript contains a descriptive caption for each supplementary material Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk) AFTER ACCEPTANCE Upon acceptance of your article you will receive a link to the special Author Query Application at Springer s web page where you can sign the Copyright Transfer Statement online and indicate whether you wish to order OpenChoice, offprints, or printing of figures in color.

Once the Author Query Application has been completed, your article will be processed and you will receive the proofs. Copyright transfer Authors will be asked to transfer copyright of the article to the Publisher (or grant the Publisher exclusive publication and dissemination rights). This will ensure the widest possible protection and dissemination of information under copyright laws. Creative Commons Attribution-NonCommercial 4.0 International License Offprints Offprints can be ordered by the corresponding author. Color illustrations Online publication of color illustrations is free of charge. For color in the print version, authors will be expected to make a contribution towards the extra costs. Proof reading The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor. After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article. Online First The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers. OPEN CHOICE In addition to the normal publication process (whereby an article is submitted to the journal and access to that article is granted to customers who have purchased a subscription), Springer provides an alternative publishing option: Springer Open Choice. A Springer Open Choice article receives all the benefits of a regular subscription-based article, but in addition is made available publicly through Springer s online platform SpringerLink. Open Choice Copyright and license term CC BY Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under the Creative Commons Attribution License. Find more about the license agreement RESEARCH DATA POLICY

The journal encourages authors, where possible and applicable, to deposit data that support the findings of their research in a public repository. Authors and editors who do not have a preferred repository should consult Springer Nature s list of repositories and research data policy. List of Repositories Research Data Policy General repositories - for all types of research data - such as figshare and Dryad may also be used. Datasets that are assigned digital object identifiers (DOIs) by a data repository may be cited in the reference list. Data citations should include the minimum information recommended by DataCite: authors, title, publisher (repository name), identifier. DataCite Springer Nature provides a research data policy support service for authors and editors, which can be contacted at researchdata@springernature.com. This service provides advice on research data policy compliance and on finding research data repositories. It is independent of journal, book and conference proceedings editorial offices and does not advise on specific manuscripts. Helpdesk ETHICAL RESPONSIBILITIES OF AUTHORS This journal is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct. Authors should refrain from misrepresenting research results which could damage the trust in the journal, the professionalism of scientific authorship, and ultimately the entire scientific endeavour. Maintaining integrity of the research and its presentation can be achieved by following the rules of good scientific practice, which include: The manuscript has not been submitted to more than one journal for simultaneous consideration. The manuscript has not been published previously (partly or in full), unless the new work concerns an expansion of previous work (please provide transparency on the re-use of material to avoid the hint of text-recycling ( self-plagiarism )). A single study is not split up into several parts to increase the quantity of submissions and submitted to various journals or to one journal over time (e.g. salami-publishing ). No data have been fabricated or manipulated (including images) to support your conclusions No data, text, or theories by others are presented as if they were the author s own ( plagiarism ). Proper acknowledgements to other works must be given (this includes material that is closely copied (near verbatim), summarized and/or paraphrased), quotation marks are used for verbatim copying of material, and permissions are secured for material that is copyrighted. Important note: the journal may use software to screen for plagiarism. Consent to submit has been received explicitly from all co-authors, as well as from the responsible authorities - tacitly or explicitly - at the institute/organization where the work has been carried out, before the work is submitted. Authors whose names appear on the submission have contributed sufficiently to the scientific work and therefore share collective responsibility and accountability for the results. In addition:

Changes in authorship, or in the order of authors, are not accepted after the acceptance for publication of a manuscript. Requesting to add or delete authors at revision stage, proof stage, or after publication is a serious matter and may be considered when justifiably warranted. Justification for changes in authorship must be compelling and may be considered only after receipt of written approval from all authors and a convincing, detailed explanation about the role/deletion of the new/deleted author. In case of changes at revision stage, a letter must accompany the revised manuscript. In case of changes after acceptance for publication, the request and documentation must be sent via the Publisher to the Editor-in-Chief. In all cases, further documentation may be required to support your request. The decision on accepting the change rests with the Editor-in-Chief of the journal and may be turned down. Therefore authors are strongly advised to ensure the correct author group, corresponding author, and order of authors at submission. Upon request authors should be prepared to send relevant documentation or data in order to verify the validity of the results. This could be in the form of raw data, samples, records, etc. If there is a suspicion of misconduct, the journal will carry out an investigation following the COPE guidelines. If, after investigation, the allegation seems to raise valid concerns, the accused author will be contacted and given an opportunity to address the issue. If misconduct has been established beyond reasonable doubt, this may result in the Editor-in-Chief s implementation of the following measures, including, but not limited to: If the article is still under consideration, it may be rejected and returned to the author. If the article has already been published online, depending on the nature and severity of the infraction, either an erratum will be placed with the article or in severe cases complete retraction of the article will occur. The reason must be given in the published erratum or retraction note. The author s institution may be informed. DISCLOSURE OF POTENTIAL CONFLICTS OF INTEREST Authors must disclose all relationships or interests that could have direct or potential influence or impart bias on the work. Although an author may not feel there is any conflict, disclosure of relationships and interests provides a more complete and transparent process, leading to an accurate and objective assessment of the work. Awareness of a real or perceived conflicts of interest is a perspective to which the readers are entitled. This is not meant to imply that a financial relationship with an organization that sponsored the research or compensation received for consultancy work is inappropriate. Examples of potential conflicts of interests that are directly or indirectly related to the research may include but are not limited to the following: Research grants from funding agencies (please give the research funder and the grant number) Honoraria for speaking at symposia Financial support for attending symposia Financial support for educational programs Employment or consultation Support from a project sponsor Position on advisory board or board of directors or other type of management relationships Multiple affiliations Financial relationships, for example equity ownership or investment interest Intellectual property rights (e.g. patents, copyrights and royalties from such rights) Holdings of spouse and/or children that may have financial interest in the work

In addition, interests that go beyond financial interests and compensation (non-financial interests) that may be important to readers should be disclosed. These may include but are not limited to personal relationships or competing interests directly or indirectly tied to this research, or professional interests or personal beliefs that may influence your research. The corresponding author collects the conflict of interest disclosure forms from all authors. In author collaborations where formal agreements for representation allow it, it is sufficient for the corresponding author to sign the disclosure form on behalf of all authors. Examples of forms can be found here: The corresponding author will include a summary statement in the text of the manuscript in a separate section before the reference list, that reflects what is recorded in the potential conflict of interest disclosure form(s). See below examples of disclosures: Funding: This study was funded by X (grant number X). Conflict of Interest: Author A has received research grants from Company A. Author B has received a speaker honorarium from Company X and owns stock in Company Y. Author C is a member of committee Z. If no conflict exists, the authors should state: Conflict of Interest: The authors declare that they have no conflict of interest. ENGLISH LANGUAGE SUPPORT For editors and reviewers to accurately assess the work presented in your manuscript you need to ensure the English language is of sufficient quality to be understood. If you need help with writing in English you should consider: Asking a colleague who is a native English speaker to review your manuscript for clarity. Visiting the English language tutorial which covers the common mistakes when writing in English. Using a professional language editing service where editors will improve the English to ensure that your meaning is clear and identify problems that require your review. Two such services are provided by our affiliates Nature Research Editing Service and American Journal Experts. English language tutorial Nature Research Editing Service American Journal Experts Please note that the use of a language editing service is not a requirement for publication in this journal and does not imply or guarantee that the article will be selected for peer review or accepted. If your manuscript is accepted it will be checked by our copyeditors for spelling and formal style before publication.

http://www.springer.com/journal/12237