This guide provides information on the installation of the 1710, 2315 and 2800 RF Kits from Autostart. Compatibility... System Functionality...

Similar documents
CONNECTOR A (BLACK 4 PIN) LED S CONNECTOR B (WHITE 4 PIN) CONNECTOR C (WHITE 5 PIN) CONNECTOR D (WHITE 2 PIN) 1x device. 2x - 10x

Instruction Manual. 2.4G Digital Wireless Four Channel Transmitter System RVS-554W. Reverse With Confidence 1

Instruction Manual. Wireless Transmitters (Digital) RVS-550W. Reverse With Confidence 1

Widescreen Headrest Monitor

MaxView Cinema Kit Quick Install Guide

Quick Release Roof-Mount Kit MB700

Warranty and Registration. Warranty: One Year. Registration: Please register your product at Port, or. or Windows.

Headrest Monitor Directed Electronics N

UC1000 Universal Controller

Optical Mobile Mouse. User s Manual

Owner s Manual. Backup Monitor System. LCD Monitor & CCD Color Camera

what s in the Box? Camera transmitter with power cable 3M sticker 2 RVS SYSTEMS

Satellite Receiver. Chapter REMOTE CONTROL USING THE MENUS USING TEXT FIELDS. About Your Satellite Receiver. What you ll find in this chapter:

SC-C1M SiriusConnect TM Vehicle Tuner

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range

TABLE OF CONTENTS Bass Bass Bass Bass Bass Bass Bass

Warning and Safety Information. FCC Information

OWNER S MANUAL. Model 861 Hand Held Bale Scanner # REVISED 4-10

Portable In-Motion Automatic Satellite System. Model VQ3000

Chapter 1 : FCC Radiation Norm...3. Chapter 2 : Package Contents...4. Chapter 3 : System Requirements...5. Chapter 4 : Hardware Description...

CN12 Technical Reference Guide. CN12 NTSC/PAL Camera. Technical Reference Guide PCB Rev

For use with QED and hardwired control panels ONLY!

INSTALLATION MANUAL. Full Plug n Play kit for installing Sirius Radio in compatible vehicles

Indoor/Outdoor Security System with Quad Monitor User s Manual

FDTV2A Owner s Manual

Owner s Manual. VL9000 Series HEADREST MONITOR SYSTEM

WINEGARD. TRAV LER Automatic Multi-Satellite TV Antenna. Model SK-3003 DIRECTV TRIPLE FEED INSTALLATION MANUAL. Made in the U.S.A.

Portable Automatic Satellite System. Model VQ2000

The specially designed stand (Included) made possible to use it indoor as well.

Digital Tiny Traveler Wireless Baby Monitor for Your Car

Quick Start Guide ABOUT THE CAMERA

NNG-GM2 Navigation interface for GM vehicles equipped with LVDS MYLink/CUE NTV-KIT552

SDI-SDHDXPRO User Manual. Version1.2

Model PSKIT-H540 Ultrasonic Power Supply Kit 40 khz 500 Watts

CGA0101 Wireless Cable Gateway Quick Installation Guide

Home Kit. Model XM101HK

Omnidirectional TV/FM Antenna

Expand Your Factory Radio add Satellite Radio Harness Connection

Owner s Manual. HDMI over Cat5/Cat6 Active Extender with Built-in 4K Upscaler. Models: B126-1A0-SC4K and B126-1A1-SC4K

USER INSTRUCTIONS MODEL CSI-200 COAXIAL SYSTEM INTERFACE

ISIS intouch NET Wi Fi Touch Screen Controller Owner s Manual and Instruction Guide

KD5500. Automatic Satellite TV Antenna for DISH Programming. Owner s Manual

Low Profile Digital HDTV Over-the-Air Antenna CONTENTS

ROLL-A-STRIKE. Assembly Instructions Model CONTACT INFO. Hours. Technical Support Monday to Friday (9am to 5pm EST)

Table of contents. Opening the Overhead Monitor... 4 Precautions Care And Maintenance... 5 Operating OHM102/153 Monitor...

Enable-IT 821P PoE Extender Quickstart Guide Professional Grade Networking

MYE TV Audio Grabber

Low Profile Digital HDTV Over-the-Air Antenna CONTENTS

SCC1C SiriusConnect TM Vehicle Tuner. Installation Guide

Enable-IT 824WP Outdoor Waterproof PoE Extender Kit Quickstart Guide Professional Grade Networking

MWT-FM. Operation Manual. FM Single Channel Transmitter. man_mwtfm.

User Manual. AtlonA. Passive VGA Extender with Wall Plate or Box options up to 330ft over 1 x CAT5/6/7 Cable AT-VGA100-SR and AT-WPVGA-SR AT-WPVGA-SR

7 LCD Color Monitor 8 LCD Color Monitor OWNER S MANUAL

Designed in Colorado, USA. Bluetooth Cable. Quick Start Guide

Quick Installation Guide. Indoor / Outdoor Antenna, Antenna Cable & Surge Arrestor

blink USER GUIDE Bluetooth capable Reclocker Wyred 4 Sound. All rights reserved. v1.0

Sport-TIMER 3000 TM Instruction Manual

Automatic Satellite System. Model KD5500

Phone (440) Fax Wireless Rear Observation System With Night Vision Camera

Specifications. Compatible Receivers. Compatible Satellites. DIRECTV Sat DISH Sat DIRECTV Receiver Compatibility

AUDIO WIRELESS. with IR Extender Feature OWNER S MANUAL SENDER T CAT. NO

LF-IRX. 12 Month Limited Warranty LF-IRX. Remote Control Extender. Owner s manual. For customer service and technical information::

SA User Guide. Satellite Radio Receiver

The Phono Box SUMIKO Fifth Street Berkeley, CA sumikoaudio.com

Owner s Manual HDMI over Cat5 Active Extender

Instruction Manual. Do not return antenna to place of purchase. Power Inserter. See page 2 for setup instructions

Enable-IT Port Extended Gigabit Ethernet PoE DSLAM Quickstart Guide

GPS. Quick Start Guide. Model #: Lit# /04-10

QDA4-44 RF Amp/Combiner

ICRUZE INTERFACE CABLE MPC FX IC-BMW2

Guide. Installation. SKYFi2. Contents: Home and Vehicle Kits

COMFORT COMFORT CALL OWNER S MANUAL CALL SYSTEM P/N P BASE STATION & RF WIRELESS MODULE. Complete Control from TOTALINE

HDMI to Composite Converter. User s Guide

Satellite Radio. Owner s Manual. Expand Your Factory Radio. Honda/Acura PXAMG. GateWay. add

Satellite Radio. Expand Your Factory Radio ISSR bit & 29-bit LAN. Owner s Manual Gateway. add. Harness Connection USB. Port 1 Port.

HDMI 1.4 OVER SINGLE CAT5/6/7 EXTENDER WITH BI-DIRECTIONAL IR and RS232 TRANSMITTER & RECEIVER AT-HD4-100SR

OA White OA Black. Owner s Manual. Low Profile Digital HDTV Over-the-Air Antenna. w/built-in KING SureLock Digital TV Signal Meter

Indoor/Outdoor Analog Wired Camera Model P-520 USER'S MANUAL

WXL-2F, WXL-1F, WXL-2M, WXL-1M

SDI-HDRPTPRO. User Manual. HD-SDI Repeater with Signal Equalization & Re-clocking. Version 1.2

Kramer Electronics, Ltd. USER MANUAL. Model: VP-41. 4x1 VGA / XGA Switcher

LBS-1 (Lowrance Broadband Sounder)

Enable-IT 865 Q PRO Gigabit Professional Grade PoE Extender Kit Quickstart Guide

Instruction Manual. 7" Wireless Camera System with Wired Side Camera Inputs RVS-355W. Reverse With Confidence 1

DVI Over Cat5 2x2 Matrix Switch. Model: B

Metal Electrode Meter

Website: Tel: ADDRESS: 6475 Las Positas Rd. Livermore, CA Item No. E5B/E5S Installation Guide

DO NOT RETURN ANTENNA TO PLACE OF PURCHASE

User s Guide. 5.8GHz Wireless A/V Signal Sender

FDTV1a Owner s Manual

Enable-IT Port Extended Gigabit Ethernet DSLAM Quickstart Guide

In-Motion Automatic Satellite System. Model V30

COMPOSITE VIDEO (BNC) TO VGA VIDEO FORMAT CONVERTER AND SCALER AT-RGB110

QUICK START GUIDE SL-6. Powering and Wireless System for the 688 Field Production Mixer

OWNER'S MANUAL SIGNAL COMMANDER

GRANT RF CONTROL CENTER INSTALLATION INSTRUCTIONS Always disconnect battery while servicing or modifying the electrical system of the vehicle.

QCA9-33 Active Combiner

In-Motion Automatic Satellite System. Model V30

FOTS100 User Manual. BIOPAC Systems, Inc. Opsens Inc. 42 Aero Camino, Goleta, CA Tel (805) , Fax (805)

Vocia WR-1. Operation Manual

Transcription:

Update Alert: Although the is already loaded with the correct sofware, firmware updates are posted to the web on a regular basis. It is important that you check for firmware and/or install guide updates prior to the installation of the bypass or. Installation Guide This guide provides information on the installation of the 1710, 2315 and 2800 RF Kits from Autostart. Index Compatibility... System Functionality... 02 02 Antenna Installation...... 03 How to Connect... 03 How to Pair Remotes with... 04 Warranty... 08 Inside the Box AS-RFK1710 AS-RFK2315 AS-RFK2800 ASRA-2510 FBK ASRF-3515 FBK ASRF-1510 FBK ASRS-7503 BKR ASRS-1553 BKR SH 433-120 HDR FM TW-130 HDR SST 2-Way RFTD Module & XOVER Notes: 1. You will also need an XKLoader2 (or higher) for web updates at www.xpresskit.com. 2. The above images are for sample purposes only. Your remote may have a slightly different appearance.

Compatibility Range Extender* & Keyless Entry Page 2 XK Family DBALL Notes: XK Family: The power (12v) must be applied last to the XK module. DBALL: The RFTD feature of the DBALL must be turned ON and the power (12v) must be applied last. * Vehicles equipped with factory remote starter only. Standalone Remote Starter XK09 DBALL Notes: XK Family: The power (12v) must be applied last to the XK module. DBALL: The RFTD feature of the DBALL must be turned ON and the power (12v) must be applied last. Notes: 1. Visit www.xpresskit.com for vehicle application guide. 2. Also works with CANMAX400 (XK400), if available. System Functionality This system includes all of the basic system functionalities of a remote starter. Here is a table of this system s capabilities. 1-way AS-RFK1710 2-way AS-RFK2315 2-way SST AS-RFK2800 Lock Lock Lock Unlock Unlock Unlock Start*/Stop Start*/Stop Start*/Stop Trunk Trunk Trunk Panic Panic Panic AUX 1/AUX 2** AUX 1/AUX 2/Status** AUX 1/AUX 2/Status** * Runtime depends on the installed bypass and on the vehicle OEM starter runtime. ** AUX features depend on the vehicle used in the installation.

Antenna Installation Page 3 The RF module antenna must be installed inside the vehicle in the centre of the windshield, at least 9 cm (3 inches) below the roof liner with, depending on model, its pole pointing down or its antennas pointing horizontally. It is recommended to install the antenna so that it is hidden from the driver s view by the rear-view mirror. Peel off the tape on the RF module s antenna and position the antenna on the windshield inside the vehicle. Run the antenna cable between the roof and the roof liner, behind the left side A pillar trim and run it down under the driver s dashboard. Note: Some vehicles have a side-curtain airbag located in the left-side A pillar trim. It is very important to pass the antenna wire between the airbag and the actual metal of the A pillar to avoid obstructing the path of the airbag in the event of deployment. Making the Proper Connections 1. Connect the antenna to the module using the antenna harness (#1 in the diagram). 2. Connect the bypass module to the 4-pin connector of the using the crossover D2D harness supplied with the (#2 in the diagram). Note: Do NOT use the D2D cable supplied with the bypass module. 3. Connect the bypass module s wires to the vehicle according to the firmware install guide. HARNESS #1 Antenna HARNESS #2 D2D crossover cable (supplied with the ) DBALL: The RFTD feature must be turned ON. * Model may vary. Check for correct bypass model on www.xpresskit.com.

Pairing the AS-RFK1710 Remote with Page 4 Spare remote part #: ASRA-2510 FBK 1 Make sure that all the required components are connected. Refer to the Making the Proper Connections section for more information. 2 Press, release, then press and hold the programming button to enter pairing mode. Press, Release, then Press & Hold the 3 Press Lock or Unlock while holding the programming button to pair the remotes. Important Note! There are 4 memory slots. Every time you pair a new remote, you access the next slot, empty or not. Once the fourth one is reached, it will revert to the first one. To pair extra remotes, repeat steps 4 to 6 for each one (up to a maximum of 4 remotes). Keep Holding Press Lock or Unlock 4 When the pairing sequence is completed, release the programming button. Release the 5 Verify that all system functionalities work properly.

Pairing the AS-RFK2315 Remotes with Page 5 Spare remote part #: ASRF-3515 FBK (2 way) ASRF-1510 FBK (1 way) 1 Make sure that all the required components are connected. Refer to the Making the Proper Connections section for more information. 2 Press, release, then press and hold the programming button to enter pairing mode. Press, Release, then Press & Hold 3 Press Lock or Unlock while holding the programming button to enter pairing mode. Important Note! There are 4 memory slots. Every time you pair a new remote, you access the next slot, empty or not. Once the fourth one is reached, it will revert to the first one. To pair extra remotes, repeat steps 4 to 6 for each one (up to a maximum of 4 remotes). Keep Holding Press Lock or Unlock 4 When the pairing sequence is completed, release the programming button. Release the 5 Verify that all system functionalities work properly.

Pairing the AS-RFK2800 Remotes with 2-Way Transmitter/Receiver (ASRS-7503 BKR) Page 6 Spare remote part #: ASRS-7503 BKR 1 Make sure that all the required components are connected. Refer to the Making the Proper Connections section for more information. 2 Press and hold the lbutton on the remote until it sounds a long beep and the screen displays MAIN MENU (takes approximately 12 seconds). Note: After 3 seconds, you will see the Car 1/Car 2 signal; do NOT let go of the lbutton. MAIN MENU Press & Hold lbutton (side of remote) 3 Once you release the lbutton, the screen displays SETUP REMOTE. SETUP REMOTE Release lbutton (side of remote) 4 Press and release the Trunk or Start/Stop button until the screen displays PAIR REMOTE. PAIR REMOTE Press & Hold Trunk or Start/Stop Button (side of remote) 5 Press the lbutton until the remote sounds 3 beeps and displays PAIR. Release the lbutton; the remote is now in pairing mode. PAIR Press & Release lbutton (side of remote) 6 Press, release, then press and hold the programming button to enter pairing mode. Press, Release, then Press & Hold 7 Press the remote Lock button while holding the programming button. The LED flashes and the remote screen displays PASSED. If the remote pairing FAILED, press the Lock button once more. Note: To pair extra remotes, repeat this step for each one without releasing the programming button (up to a maximum of 4 remotes). Keep Holding PASSED 8 When the pairing sequence is completed, release the programming button. Wait 30 seconds for remote to exit pairing mode. Release

Page 7 1-Way Transmitter (ASRS-1553 BKR) Spare remote part #: ASRS-1553 BKR 1 2 3 Make sure that all the required components are connected. Refer to the Making the Proper Connections section for more information. Press and hold the! button on the remote until it sounds a long beep and the LED turns ON solid (takes approximately 12 seconds). Press and release the Start/Stop button until the remote sounds 3 times and the amber LED turns ON solid. Press & Hold! Button Press & Hold Start/Stop Button 4 Press, release, then press and hold the programming button to enter pairing mode. Press, Release, then Press & Hold 5 Press the remote Lock button while holding the programming button. The LED flashes. Note: To pair extra remotes, repeat this step for each one without releasing the programming button (up to a maximum of 4 remotes). Keep Holding 6 When the pairing sequence is completed, release the programming button. Wait 30 seconds for remote to exit pairing mode. All the remote LEDs will turn OFF when pair mode is exited. Release

Limited One Year Consumer Warranty Page 8 For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. ( DIRECTED ) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the Part ), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer s name, address, telephone number, the authorized licensed dealer s name and complete product and Part description. This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction. TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS F PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES N AUTHIZES ANY PERSON ENTITY TO ASSUME F IT ANY DUTY, OBLIGATION LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY F ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS INSTALLERS. IN THE EVENT OF A CLAIM A DISPUTE INVOLVING DIRECTED ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFNIA. CALIFNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHIZED DIRECTED DEALER S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE F ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES F THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE REPAIR AT DIRECTED S OPTION THE PART AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. 920-0007 2009-09 This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only. Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada. Additional information can be found at: www.xpresskit.com www.directechs.com