MAGICSTRAP Technical Data Sheet Murata part number : LXMS31ACNA / LXMS31ACMD

Similar documents
UHF RFID Tag Data Sheet LXMS21ACNP-184

OBSOLETE HMC215LP4 / 215LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram

Technical Data Sheet 0805 Package White Chip LED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Top view LEDs 45-21UMC/XXXXXXX/TR8

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 70 MHz

ET-5050x-BF1W Datasheet

Sub-G Module Data Sheet

Technical Data Sheet 0603 Package Chip LED (0.4mm Height)

High Frequency Ceramic SMT Chip Inductor SCL160808CS Series

LED Display Product Data Sheet LTS-4817SW-P Spec No.: DS Effective Date: 10/04/2011 LITE-ON DCC RELEASE

YJ-VTC-2835-G01 High CRI LED

EAST16086YA1 SMD B. Applications

Package View. TSSOP-16EP (Type DX) DETAIL 'A' 01( 18x) 02 R1 R L L1

ET-5050RTB-333W Datasheet

42-21/BHC-AUW/1T SMD B

16-213SDRC/S530-A3/TR8

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

HMC219AMS8 / 219AMS8E. Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

CLH1005T Series Specification

YJ-VTC-5730-G02 High CRI LED

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

QPL6216TR7 PRELIMINARY. Product Description. Feature Overview. Functional Block Diagram. Applications. Ordering Information. High-Linearity SDARS LNA

Parameter Min. Typ. Max. Min. Typ. Max. Units

YJ-BC-3030-G01 High CRI LED

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +13 dbm IF = 100 MHz

SMD B /BHC-YJ2K2TX/3T

Data Sheet. HSMW-C120, HSMW-C130, HSMW-C191, HSMW-C197, HSMW-C265 White ChipLEDs. Description. Features. Applications

Technical Data Sheet White SMD Surface Mount Device

ASMT SxB5 Nxxxx Surface Mount LED Indicator

Features OBSOLETE. = +25 C, As a Function of LO Drive. LO = +10 dbm. IF = 70 MHz

ELECTRICAL-OPTICAL CHARACTERISTICS (T C = 25 C) VALUE MIN. TYP. MAX.

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

SMD B 15-22SURSYGC/S530-A2/TR8

YJ-BC-2835L-G02 High CRI LED

Bulb Down Light Decorative Light

PLCC 5630B 0.5W High CRI Datasheet

Features Description Applications

1.10mm Height 1210 Package. Bi-Color (Multi-Color) Chip LED. Technical Data Sheet. Part No: S155VBC-V12B-B41B

Package View X2-DFN Seating Plane X2-DFN1006-3

Features. = +25 C, As a Function of LO Drive

Features: Descriptions: Applications:

SMD B 42-21UYC/S530-A2/TR8

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

* Notices. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage.

CMD179C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

CMD180C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

SMD B 23-22B/R7G6C-A30/2T

Features. Applications

17-21SYGC/S530-E2/TR8

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Luckylight Package Pure Green Chip LED. Technical Data Sheet. Part No.: S150PGC-G5-1B

17-21SURC/S530-A2/TR8

Features. Applications

Features OBSOLETE. = +25 C, IF = 1.45 GHz, LO = +13 dbm [1]

Luckylight Package Warm White Chip LED. Technical Data Sheet. Part No.: S150W-W6-1E

PLCC W CRI K Datasheet

ADE-R3GLH+ CONVERSION LOSS 50. ISOLATION (db) 10 LO= +7 dbm LO= +10 dbm LO=+13 dbm FREQUENCY (MHz) RF VSWR

Luckylight. 1.10mm Height 0805 Package. Warm White Chip LED. Technical Data Sheet. Part No.: S170W-W6-1E

19-217/B7C-ZL2N1B3X/3T

= +25 C, IF= 100 MHz, LO = +17 dbm*

ELECTRICAL-OPTICAL CHARACTERISTICS (T C = 25 C) VALUE MIN. TYP. MAX.

Technical Data Sheet 0805 Package Chip LED (0.8mm Height)

ELECTRICAL-OPTICAL CHARACTERISTICS (T C = 25 C) VALUE MIN. TYP. MAX.

Not recommended for new designs

CMD255C GHz High IP3 Fundamental Mixer. Features. Functional Block Diagram. Description

SMD B /R6C-AP1Q2B/3T

Part No: 0805-FLWC-DHB

SPECIFICATION. DVB-T / Worldwide NIM Tuner

Features. = +25 C, IF = 100 MHz, LO = 0 dbm, Vcc1, 2, 3, = +5V, G_Bias = +3.5V*

50~100MHz. 100~210MHz C2 1nF. Operating Case Temperature -40 to +85 Storage Temperature -55 to +155 Junction Temperature +126 Operating Voltage

Features. = +25 C, 50 Ohm System

Features. Applications

11-22SURSYGC/S530-A3/TR8

PLCC W CRI 80 Datasheet

PLCC Series 5630B HE High CRI

Features. PFD Output Voltage 2000 mv, Pk - Pk. PFD Gain Gain = Vpp / 2π Rad khz 100 MHz Square Wave Ref.

Typical Performance 1. 1 Device performance _ measured on a BeRex evaluation board at 25 C, 50 Ω system.

Features. = +25 C, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V *

HMC814LC3B FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT. Features. Typical Applications

Features. Applications. Part Number Color Package Description

CMD178C GHz Fundamental Mixer. Features. Functional Block Diagram. Description

ASMT UxB5 Nxxxx Surface Mount LED Indicator

PLCC Series EMC 3030 Single color

Features. Applications

Features. = +25 C, Vdd = +4.5V, +4 dbm Drive Level

Features. Parameter Min. Typ. Max. Min. Typ. Max. Units

V. PLCC Series. Datasheet. Introduction : Description : Feature and Benefits : PLCC Series

= +25 C, IF= 100 MHz, LO = +15 dbm*

Features. = +25 C, 50 Ohm System

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors

3528-2PIN-SMD LED. White LED. Lumimicro 3528 One Chip Specification Doc. No: LUMI P SPEC.

Monolithic Amplifier GVA-60+ Flat Gain, High IP to 5 GHz. The Big Deal

CMD183C GHz I/Q Mixer. Features. Functional Block Diagram. Description

Features. Applications R TOP VIEW

Data Sheet. ASMT-UWB1-NX302 OneWhite Surface Mount PLCC-2 LED Indicator. Description. Features. Applications

Features. = +25 C, IF = 0.5 GHz, LO = +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

The HSMB-C110 is a right-angle package with the universally accepted dimensions of 3.2 x 1.0 x 1.5 mm. This part is ideal for

ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors

Transcription:

1. General Descriptions Murata MAGICSTRAP is an innovative RFID module with a wide range of RF features. It incorporates an industry standard IC. [Features] 1-1. Compliant to EPC global Class1Gen2 1-2. Ultra small package (3.2X1.6X0.55mm typ.) 1-3. Supports wide frequency range from 865MHz to 955MHz, allowing to cover all globally relevant UHF frequency bands with one single design. 1-4. Impedance transformation function for more accurate matching with various antenna designs - 4 different variants available, which allow perfect matching to antenna impedance 1-5. Both conductive material & non-conductive material can be used for connection to antenna. 1-6. Wide mechanical mounting tolerance for assembly into RFID tag or inlay 1-7. Fully Compatible with conventional SMT process and reflow soldering 1-8. Compatible with plastic molding process (150 C max. over 2 hours) 1-9. High ESD protection function 1-10. 100% green material for full RoHS compliance 1-11. Internal 512bit user memory available 2. Memory Capacity Parameter EPC User TID MAGICSTRAP P/N Memory Memory Memory LXMS31ACNA 009. 010, 011, 012 Up to 240 bits 512 bits 64 bits LXMS31ACMD 141, 142, 143, 144 Up to 128 bits 512 bits 96 bits 3. Block Diagram Matching Circuit Analog F/E Controller Memory Integrated Circuit Nov. 2012 1 / 8

4. Mechanical Information 4-1. Dimensions L T <Top View> W <Side View> <Bottom View> b2 d b1 T a [mm] Mark Dimensions Mark Dimensions L 3.2±0.2 b1 0.18±0.18 W 1.6±0.2 b2 0.18±0.18 T 0.7 max. d 0.7±0.1 a 1.25±0.1 - - 4-2. Recommended mounting pattern at antenna side for reflow soldering 1.75 0.25 [mm] 0.625 Land Solder Resist Nov. 2012 2 / 8

4-3. Recommended mounting pattern at antenna side for the attachment by adhesive 2.25 0.25 [mm] 1.0 Mounting pad pattern 5. Electrical Performance 5-1. Frequency range 865 955 MHz 5-2. Minimum operating power -8dBm 5-3. Electrical characteristics at minimum operating power (Ta=25, Unit : Ohm) MAGICSTRAP LXMS31ACNA LXMS31ACNA LXMS31ACNA LXMS31ACNA P/N - 009-010 - 011-012 LXMS31ACMD LXMS31ACMD LXMS31ACMD LXMS31ACMD Parameter - 141-142 - 143-144 Impedance value @866.5 MHz @915.0 MHz @953.0 MHz R 15 12 25 80 X -45-107 -200-405 R 25 12 25 80 X -45-107 -200-420 R 30 9 20 60 X -48-105 -195-425 Nov. 2012 3 / 8

5-4. Impedance Measurement Method LXMS31 ACNA/ACMD-*** NETWORK ANALYZER 5-5. IC incorporated NXP G2XM (PNs LXMS31ACNA-009 to -012) Impinj Monza4QT (PNs LXMS31ACMD-141 to -144) 6. OPERATING TEMPERATURE -40 C ~ +85 C 7. RoHS compliance MAGICSTRAP is compliant to RoHS directive. 8. Attachment of MAGICSTRAP MAGICSTRAP has electrodes at the bottom side which enable an inductive coupling with the antenna pad when using a non-conductive adhesive as well as making a conductive connection with antenna. 9. Tape and Reel Packing 9-1. Dimensions of Tape ( Plastic tape ) Nov. 2012 4 / 8

Maximum cumulative tolerance ± 0.15 every 10 pitches Reference value 9-2. Dimensions of Reel Nov. 2012 5 / 8

9-3. Leader and Tail tape 9-4 Taping direction The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. 9-5 Quantity per reel Packaging unit :4000 pcs./ reel 9-6 Material material : Base tape Plastic Reel Plastic Cover tape and cavity tape are made the anti-static processing. 9-7 Strength/Peeling force Tear off strength against pulling of cover tape : 5 N min. Peeling of force : 0.7 N max. in the direction of peeling as shown below. Nov. 2012 6 / 8

0.7 N max. 165 ~ 180 Cover tape Base tape 9-8 PACKAGE (Humidity proof Packing) Desiccant 乾燥剤 Humidity 湿度 Indicator インジケ-タ 表示ラべル Label 表示ラベル Label Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity inductor. Anti-humidity 防湿梱包袋 Plastic Bag 10. Ordering part number IC NXP G2XM Impinj Monza4QT User Memory Size 512 bits 512 bits Part number LXMS31ACNA 009 LXMS31ACNA 010 LXMS31ACNA 011 LXMS31ACNA 012 LXMS31ACMD 141 LXMS31ACMD 142 LXMS31ACMD 143 LXMS31ACMD 144 Each part number has different impedance value. Please refer 5-3. Electrical characteristics. Nov. 2012 7 / 8

< Note > This document is subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. Please refer to following URL for other usage of MAGICSTRAP and our company RFID related products. URL : http://www.murata.com/products/rfid/index.html For any inquiries/queries, please feel free to contact us. e-mail : magicstrap@ml.murata.co.jp Nov. 2012 8 / 8