Volition TM RJ45 K5e Jacks Part of our 3M Volition Network Solutions, the new K5e range is our ultimate Category 5e hardware component (ISO/IEC 11801, EN 50173 and ANSI/TIA/EIA-568). The K5e jack is a core product in our system solution, which includes a comprehensive range of patch panels, sokkets and faceplates, Category 5e patch cords and cables. The K5e jack offers the best margin over Class D / Category 5e link standards. RJ45 K5e Jacks UTP The RJ45 K5e jack is available in three different formats: UTP FTP with drain wire STP 360 braid or foil connection A unique design: Tool-less jack: Re-usable Shallow Depth, Cable Entry from top or bottom: Benefits Easy and quick to install Fast reliable connection in record time: all 8 copper conductors are effortlessly wired in a single operation Quality of connection by design: not dependant on tool condition or operator skills, just listen for the click Consistent results: the length of untwisted pairs and the length between the end of the conductor and the IDC contacts are always kept to a minimum, by design If a wiring mistake is made there is no need to use a new jack No time wasted waiting for another delivery Easier cable management More space and flexibility to ensure the cable minimum bend radius is never compromised - Allows a wide range of cable routing options - Can be used with low profile trunking and boxes UTP, FTP and STP 360 shielded versions have the same "one-click tool-less design: Accepts both solid conductors from AWG 26 to 22 and stranded conductors: Integral shutter: Solutions for all levels of EMC protection using the same accessories means less training Compatible with all cables on the market and enables jack to plug cables to be manufactured using stranded conductors (for use in open office architectures) Increased dust protection, especially during installation or in a dirty environment No additional shuttering required on faceplates Higher port density Allows direct mounting into floor boxes Protects jacks in the patch panel
Specifications - Cat 5e hardware component - IEC 60603-7-2 compliant - Integral shutter - Single forked contacts - Conductor diameter: 0,50 mm to 0,65 mm solid copper, 7x0,15 to 0,20 mm stranded cable - Sheath diameter: 1,6 mm max Technical characteristics - Lead-through resistance 17 mω < Resistance < 20 mω - Insulation resistance > 10 MΩ RJ-45 Category 5e Hardware test result (Typical values) Frequency Attenuation Return Loss NEXT pair to pair 100 MHz < 0.2 db 24 db 49 db Permanent Link 5e / Class D test result (Typical values) Attenuation NEXT ELFEXT Return Loss Value 17.9 db 52.6 db 35.4 db 25.2 db Margin 3.1 db 7.9 db 8.6 db 6.4 db Frequency 99.4 MHz 17.4 MHz 39.2 MHz 21.2 MHz Ordering Information Ref.-No. Volition RJ45 K5e Jack, Category 5e, UTP, white VOL-OCK5E-U UTP jacks are also available in blue, green, red, yellow, black, orange and almond Volition RJ45 K5e Jack, Category 5e, FTP, white and a ninth point to ensure the grounding continuity VOL-OCK5E-F Volition RJ45 K5e Jack, Category 5e, FTP white and metallic shield, metallic nose and tinned bronze cover shielded by reservible metal cover. Supplied with a fixing colar continuity VOL-OCK5E-S 3M and Volition are trademarks of the 3M Company. Quante is a trademark of Quante AG. Important Notice 3M does not accept reponsibility or liability, direct or consequential arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M s liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the seller s terms of sale subject where applicable to the prevailing law. 3M Telecommunications Europe, Middle East & North Africa c/o Quante AG Carl-Schurz-Straße 1 41453 Neuss Germany If any goods supplied or process ed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the price of the goods or services. Except as set out above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. Tel.: ++49 (0)2131 / 14-5999 Fax: ++49 (0)2131 / 14-5998 Internet: www.3mtelecommunications.com Rights reserved to make technical alternations. Dr.Nr. 07-404-60800/06.2003-pdf
Volition TM RJ45 K6 Jacks Part of our 3M Volition Nework Solutions, the new K6 range is our ultimate Category 6 hardware component (ISO/IEC 11801,EN 50173 and ANSI/TIA/EIA-568). The K6 jack is a core product in our system solution, which includes a comprehensive range of patch panels, sockets and faceplates, Category 6 patch cords and cables. The K6 Jack offers the best margin over Class E / Category 6 link standards. RJ45 K6 Jacks The RJ45 K6 jack is available in three different formats: - UTP - FTP with drain wire - STP 360 braid or foil connection A unique design: Tool-less jack: Re-usable: Shallow Depth, Cable Entry from top or bottom: UTP, FTP, and STP, 360 shielded versions have the same "one-click" tool-less design: Accepts both solid conductors from AWG 26 to 22 and stranded conductors: Integral shutter: Benefits Easy and quick to install Fast reliable connection in record time: all 8 copper conductors are effortlessly wired in a single operation Quality of connection by design: not dependant on tool condition or operator skills, just listen for the click Consistent results: the length of untwisted pairs and the length between the end of the conductor and the IDC contacts are always kept to a minimum, by design If a wiring mistake is made there is no need to use a new jack no time wasted waiting for another delivery Easier cable management More space and flexibility to ensure the cable minimum bend radius is never compromised - Allows a wide range of cable routing options - Can be used with low profile trunking and boxes Solutions for all levels of EMC protection using the same accessories means less training Compatible with all cables on the market and enables jack to plug cables to be manufactured using stranded conductors (for use in open office architectures) Increased dust protection, especially during installation or in a dirty environment No additional shuttering required on faceplates Higher port density Allows direct mounting into floor boxes Protects jacks in the patch panel
Specifications - Category 6 hardware component - IEC 60603-7 compliant - Integral shutter - Single forked contacts - Conductor diameter: 0,50 mm to 0,65 mm solid copper, 7 x 0,15 to 0,20 mm stranded cable - Sheath diameter: 1,6 mm max Technical characteristics - Lead-through resistance 17 mω < Resistance <20 mω - Insulation resistance > 10 MΩ RJ-45 Category 6 Hardware test result (Typical values) Frequency 100 MHz 200 MHz 250 MHz Attenuation < 0.2 db < 0.2 db < 0.3 db Return Loss 24 db 18.5 db 16 db NEXT pair to pair 58 db 50 db 47.5 db Permanent Link Class E test result (Typical values) Attenuation NEXT ELFEXT Return Loss Value 29.5 db 43.4 db 22.2 db 25.3 db Margin 1.0 db 8.1 db 5.9 db 4.3 db Frequency 250 MHz 250 MHz 250 MHz 4 MHz Ordering Information Ref.-No. Volition, RJ45 K6 Jack, Category 6, UTP, white VOL-OCK6-U UTP jacks are also available in blue, green, red, yellow, black, orange and almond Volition, RJ45 K6 Jack, Category 6, FTP, white Ninth point for grounding continuity VOL-OCK6-F Important Notice 3M does not accept reponsibility or liability, direct or consequential arising from reliance upon any information provided and the user should determine the suitability of the products for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M s liability for death or personal injury arising from its negligence. All questions of liability relating to 3M products are governed by the seller s terms of sale subject where applicable to the prevailing law. Volition, RJ45 K6 Jack, Category 6, STP, white and metallic shield Metallic nose and tinned bronze cover shielded by a reversible metal cover Supplied with a fixing collar 3M and Volition are trademarks of 3M. Quante is a trademark of Quante AG. 3M Telecommunications Europe, Middle East & North Africa c/o Quante AG Carl-Schurz-Straße 1 41453 Neuss Germany VOL-OCK6-S If any goods supplied or process ed by or on behalf of 3M prove on inspection to be defective in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer the price of the goods or services. Except as set out above, all warranties and conditions, whether express or implied, statutory or otherwise are excluded to the fullest extent permissible at law. Tel.: ++49 (0)2131 / 14-5999 Fax: ++49 (0)2131 / 14-5998 Internet: www.3mtelecommunications.com Rights reserved to make technical alternations. Dr.Nr. 07-404-64100/06.2003-pdf
3M Volition K6ASN RJ45 STP Jack Datasheet 3M Volition K6ASN RJ45 STP Jack, New Design, with three cable entries The new K6ASN RJ45 Jack is a key component of the Volition Category6A/Class EA system, fully compliant with Category 6A ISO/IEC, EN and TIA standards for hardware performance, confirmed by multiple independent lab certifications (Delta and GHMT). Its top-class electrical performance guarantees consistently high headroom at any link length, down to 3m links. The unique three cable entry points make it possible to install the jack anywhere. The 360 shielding of the jack facilitates a worry-free Class EA / Category 6A installation. The traditional 3M one click design allows an easy, tool-less termination on Volition Category 6A F/UTP, U/FTP, F/FTP and Category 7 S/FTP cables. 3M Volition K6A RJ45 STP Jack Applications Standards - IEEE 802.3 10G BASE-T - ISO/ IEC 11801 Edition 2, Am 1-2 - PoE IEEE 802.3at - ISO/ IEC 60603-7-51 - EN 50173-1 - ANSI/ TIA/ EIA-568-C.2-2009 - IEC60512-99-01 Three cable entry points Category 6A compliant according to ISO/IEC standard Category 6A compliant according to TIA standard Certified by Delta and GHMT 360 Metallic shielding Tool-less termination Re-usable jack No untwisting of pairs before termination Connector can be terminated with both solid and stranded wire Integrated automatic dust shutter Compact size POE+ compliant Benefits Less cable bending required - better compliance with minimum bend radius. Allows selection of the cable entry according to the best cable path: floor, ceiling, duct, patch panel. Out performs standards, high reliability - positive permanent link headroom down to 3m links. Assurance that the 3M K6ASN Jack complies with standards. Total immunity to alien crosstalk, by design - no need to test ANEXT on the field, dramatic reduction in testing time. No specialised tools required - termination performance independent of tool quality. No additional expenditure on tools - No delays caused by lack of tools or damaged tools. If a wiring mistake is made there is no need to use a new jack - no time wasted waiting for another delivery. Minimised stripping length - very limited pair untwist - pairs kept together. Easy fitting of the pairs without threading through a wire guide. Enables jack to plug cables to be manufactured using stranded conductors (for use in open office architectures and consolidation points). Increased dust protection, especially during installation or in a dirty environment. No additional shuttering required on faceplates. Allows direct mounting into floor boxes - protects jacks in the patch panels. Same format as other 3M RJ45 connectors. Easy mounting onto: - 3M branded face plates, patch panels, adaptors and other accessories. Compact size allows easier cable management and more space to ensure the cable minimum bend radius is never compromised. Supports PoE plus applications according to latest IEEE standards.
Specifications Plated copper shielding as protection against the effects of alien crosstalk Plated copper cap for the rear of the jack Plated copper cable cap is adaptable to allow for top, bottom or rear cable entry Metal braid on cap gives 360 connection to cable screen Tool-less connection of all eight wires at one time by closing the metal locking wings Wire holder is labelled with both 568A and 568B wire maps Single forked contacts Integrated shutter White colour (RAL 9010) Technical characteristics Conforms with hardware performance parameters of Category 6A ISO and Category 6A TIA Conductor diameter solid wires: 0,50 to 0,65 mm stranded wires: 7 x 0,15 to 0,20 mm Maximum diameter of wire insulation: 1,6 mm Lead through resistance: < 200 mω Insulation resistance: Protection contacts: RI > 500 MΩ 1,6 µm gold Electrical parameters Margins "Permanent Link" Margins "Channel" (typical values) Amendment 2 ISO/IEC 11801 Amendment 1 ISO/IEC 11801 2 nd edition:2010 2 nd edition:2008 "Class E A " "Class E A " NEXT 5 db 5.5 db PSNEXT 7.5 db 7 db ACR-F 16 db 12 db PSACR-F 17.5 db 13.5 db Return Loss 3 db 6 db Ordering Information 3M Volition RJ45 K6A STP Jack Supplied with a cable tie to hold the connector braid onto the cable shielding Ref. No. VOLOCK6ASN8 VOLOCK6ASNV (bulk) Important Notice The details contained in this literature have been carefully prepared from information available to 3M at the time of its production. However, it is not intended to be relied upon for purposes of product specification and you should contact your sales representative if specification details are required. Because of the wide variety of processes and conditions in which these products may be used, the user should first carry out tests to determine the suitability of the products for the particular use intended. All questions of warranty and liability relating to 3M products are governed by the selling 3M subsidiary's Terms of Sale subject where applicable to the prevailing law. 3M and Volition are trademarks of the 3M company. 3M Telecommunications Europe, Middle East & Africa c/o 3M Deutschland GmbH Carl-Schurz-Straße 1 41453 Neuss Germany Tel.: ++49 (0)2131 / 14-5999 Fax: ++49 (0)2131 / 14-5998 Rights reserved to make technical alternations. Internet: www.3mtelecommunications.com 07-401-27500 REV. 0 Edition 12/2012