Service Service Service. B8 Series Chasssis Manual Contents 5. Service Modes, Error Codes and Faultfinding 6. Block Diagrams and Testpoints

Similar documents
ELECTRICAL ADJUSTMENT INSTRUCTIONS

4. Alignment and Adjustments

Service Manual for D9100 Series Digital-Control Color Monitor

FOCUS VOLTAGE ADJUSTMENT 1. Receive RETMA pattern signal. 2. Adjust the FOCUS VOLUME on the FBT and make the picture on the screen be finest.

PREPARATION FOR SERVICING

BLOCK DIAGRAM. Brightness Control -120V. Vertical Blanking, FBT 30V 15V. Protection TDA8172 ( IC601) Circuit -12V 12V. H/V Sync Processor

ALIGNMENT INSTRUCTION (5N11)

2002 DP-2X Chassis Projection Television Information INSTRUCTOR Alvie Rodgers C.E.T. (Chamblee, GA.)

K Service Source. Macintosh Color Display

NewScope-7A Operating Manual

PHILIPS Anubis A(AC) Chassis

4. Alignment and Adjustments

4. Alignment and Adjustments (Electrical)

CP-830FP Chassis TX-29E50D TX-29E50D/B TX-29PS12D TX-29PS12F TX-29PS12P SPECIFICATIONS. Order No: PCZ C2

V25 V25+ WS WS WS WS V27 WS-65517

Multi-Key v2.4 Multi-Function Amplifier Keying Interface

2. Alignment and Adjustments

HIGH RESOLUTION MONITOR

GEKCO SUBCARRIER REFERENCE OSCILLATOR MODEL SRO10 OPERATION/SERVICE MANUAL

Manual 7629 Model no.: 27PS60S321 First Publish: T8 Rev. Date: Print Date: 7/8/2004

Documentation VFD clock 8 a clock

Build A Video Switcher

Industrial Monitor Update Kit

MODIFYING A SMALL 12V OPEN FRAME INDUSTRIAL VIDEO MONITOR TO BECOME A 525/625 & 405 LINE MULTI - STANDARD MAINS POWERED UNIT. H. Holden. (Dec.

SERVICE AND OPERATION MANUAL

Elements of a Television System

MASTR II BASE STATION 12/24V POWER SUPPLY 19A149979P1-120 VOLT/60 Hz 19A149979P2-230 VOLT/50 Hz

5. Service Modes, Error Codes, and Fault Finding

K Service Source. Apple Two-Page Mono Monitor

SERVICE AND OPERATION MANUAL

K Service Source. Apple High-Res Monochrome Monitor

GME. User s Manual. Rev 1.3

K Service Source. Apple AudioVision 14 Display

LX600 LCD TV Technical Information

K Service Source. Apple High-Res Monochrome Monitor

568X Ten Inch Sunlight Viewable Monochrome Monitor

SERVICE AND OPERATION MANUAL

SERVICE MANUAL COLOR TELEVISION AV-14F3PX(PH)

Hi-Rez Projections Inc. 20 Main St. Ashland, MA MP8 CRT Installation

Learning to Use The VG91 Universal Video Generator

SECTION 4 CIRCUIT ADJUSTMENTS

Presented by: Amany Mohamed Yara Naguib May Mohamed Sara Mahmoud Maha Ali. Supervised by: Dr.Mohamed Abd El Ghany

CATHODE RAY OSCILLOSCOPE. Basic block diagrams Principle of operation Measurement of voltage, current and frequency

20/20 -a phono preamplification instrument by Sutherland Engineering

Instruction Manual. Series 3000 Model R-165A. Audio/Video IF/RF Relay Panel. CATV Switching and Control

16 Stage Bi-Directional LED Sequencer

INSTRUMENT CATHODE-RAY TUBE

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0.

User's Manual. Rev 1.0

SingMai Electronics SM06. Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module. User Manual. Revision th December 2016

TV2K - TXT SERVICE MANUAL COLOUR TELEVISION RECEIVER SECIFICATION

4.9 BEAM BLANKING AND PULSING OPTIONS

Brief Description of Circuit Functions. The brief ckt. description of V20 107E5 17 Monitor

3B SCIENTIFIC PHYSICS

Total solder points: 123 Difficulty level: beginner 1. advanced AUDIO ANALYZER K8098. audio gea Give your. . high-tech ILLUSTRATED ASSEMBLY MANUAL


EA63-7D. Generator Automatic Voltage Regulator Operation Manual. Self Excited Automatic Voltage Regulator

Simple Way To Brighten Up A 17 Computer Monitor Picture Tube

OPERATING INSTRUCTIONS FOR SYLVANIA. Type I08 Cathode-Ray Oscilloscope. Sylvania Electric Products Inc. Industrial Apparatus. Emporium, Pennsylvania

COMPOSITE VIDEO LUMINANCE METER MODEL VLM-40 LUMINANCE MODEL VLM-40 NTSC TECHNICAL INSTRUCTION MANUAL

K Service Source. Macintosh 12 RGB Display

FlexiScan. Impro FlexiScan 4-Channel Controller INSTALLATION MANUAL

SATRI AMPLIFIER AMP-51R. Owner s Manual

Philips Model US-24ST2200/27

SERVICE MANUAL COLOUR TELEVISION AV-21F9(NS)

V26 Chassis V26+ Chassis V26++ Chassis WD WD WD WD WD WD-62825

MONO AMPLIFIER KIT ESSENTIAL INFORMATION. Version 2.2 CREATE YOUR OWN SPEAKER DOCK WITH THIS

USER GUIDE. DM Engineering Multi Station Relay Adapter (MSRA and MSRA-RM) Version DM Engineering

Bill of Materials: Super Simple Water Level Control PART NO

N3ZI Digital Dial Manual For kit with Serial LCD Rev 3.04 Aug 2012

MultiSystem Converter with built-in TBC/Genlock ID#488

DIY KIT MHZ 8-DIGIT FREQUENCY METER

VGA to PAL and NTSC converter

GME. User s Manual. Rev 1.3

K Service Source. Macintosh 12 RGB Display

Index. Aspect ratio 14,246 Attenuator, aerial Automatic chrominance control (a.c.c.) 112,113,130 Automatic phase control (a.p.c.

Technical Information Bulletin

Before you can install your LCD TV on the wall, you must fi rst remove the base using the steps below:

Timer Modules. EL11 24 Hour Module EL17 7 Day Module. Installation & Operating Instructions

Projection Television

Ten-Tec (865) Service Department:(865)

MAKE AN RGB CONTROL KNOB.

K Service Source. Apple Multiple Scan 17 Display

Building the BX24-AHT

Mal-2 assembly guide v1.0

ATVC-4 Plus Amateur Television Repeater Controller Copyright Intuitive Circuits, LLC

Panasonic Service and Technology Company

A MISSILE INSTRUMENTATION ENCODER

Safety Information. Camera System. If you back up while looking only at the monitor, you may cause damage or injury. Always back up slowly.

[ Photos ] [ Wares ] [ Library ] [ Dave's Web ] [ Matt's Web ] Wares [ SWISH ] [ Simple Search ] [ Trunk Calc ]

ARCAM ALPHA 5 CD PLAYER SERVICE MANUAL

XTAL Bank DDS Version 0.02 Sept Preliminary, highly likely to contain numerous errors

SPECIFICATIONS. 1. PICTURE TUBE : 19 inch (Flat Square Tube) DefIection Angle : 90 Neck Diameter : 29.1mm Transmission : 52%

LCM-6550 TRIPLE TELEVISON MODULATOR INSTRUCTION MANUAL

INSTALATION PROCEDURE

Video Streamer Modifications

LM MHz RGB Video Amplifier System with OSD

clipping; yellow LED lights when limiting action occurs. Input Section Features

Scanned and edited by Michael Holley Nov 28, 2004 Southwest Technical Products Corporation Document Circa 1976

56/588X Ten Inch VGA Colour Monitor (Y0F9151)

Transcription:

Color Television Service Service Service Chassis B8 Series Chasssis Manual 7562 Contents 5. Service Modes, Error Codes and Faultfinding 6. Block Diagrams and Testpoints 7. Electrical Diagrams and PWB's B8 CHASSIS TABLE OF SCHEMATIC DIAGRAMS MAIN CHASSIS (SECTION 1 OF 5) MAIN CHASSIS (SECTION 2 OF 5) MAIN CHASSIS (SECTION 3 OF 5) MAIN CHASSIS (SECTION 4 OF 5) MAIN CHASSIS (SECTION 5 OF 5 ) CRT PANEL (13", 19", & 20") CRT PANEL (25" & 27") KEYBOARD/SOUND SHAPER PANEL STEREO PANEL SCHEMATIC OCV TV PANEL SCHEMATIC CARD INTERCONNECT PANEL HEALTH CARE JACK PANEL LODGING/SMART PORT PANEL MAIN CHASSIS PCB (TOP) MAIN CHASSIS PCB (BOTTOM) 13", 19", & 20" CRT PANEL PCB 25", & 27" CRT PANEL PCB KEYBOARD/SOUND SHAPER PCB STEREO PANEL PCB OCV TV PANEL PCB (TOP) OCV TV PANEL PCB (BOTTOM) CARD INTERCONNECT PANEL PCB HEALTH CARE JACK PANEL PCB LODGING/SMART PORT PANEL PCB 8. Adjustments 10. Spare Parts List Copyright 2001 Philips Consumer Electronics B.V. Eindhoven, The Netherlands. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by means, electronic, mechanical, photographic, or otherwise without the prior permission of Philips. Published by Philips Consumer Electronics Subject to modification 2005 Aug 24

20B8(7562) 1 3 Vp-p 50 usec 2 3.2 Vp-p 20 usec 3 1 Vp-p 20 usec 4 5.6 Vp-p 5 msec 5 4.9 Vp-p 20 usec 6 50 Vp-p 5 msec 7 800 mvp-p 5 msec 8 2.7 Vp-p 5 msec 9 400 mvp-p 5 msec 10 29 Vp-p 5 msec 11 1.5 Vp-p 5 msec 12 2.2 Vp-p 20 usec 13 2.2 Vp-p 20 usec 14 2.2 Vp-p 20 usec 15 3.5 Vp-p 20 usec 16 3.6 Vp-p 5 msec 17 450 mvp-p 5 msec 18 750 mvp-p 5 msec 19 5 Vp-p 20 usec 20 4.2 Vp-p 20 usec

20B8(7562) 21 1.2 Vp-p 20 usec 22 220 mvp-p 0.5 usec 23 1.2 Vp-p 20 usec 24 1.2 Vp-p 20 usec 25 1.2 Vp-p 20 usec 26 1.4 Vp-p 20 usec 27 2.5 Vp-p 20 usec 28 1 Vp-p 20 usec 29 1.4 Vp-p 20 usec 30 2.5 Vp-p 20 usec 31 2.5 Vp-p 20 usec 32 1.6 Vp-p 20 usec 33 120 Vp-p 20 usec 34 1040 Vp-p(a) 20 usec 35 1 Vp-p 20 usec 36 1.8 Vp-p 20 usec 37 2 Vp-p 20 usec 38 110 Vp-p 20 usec 39 110 Vp-p 20 usec 40 850 mvp-p 5 msec

20B8(7562) 41 110 Vp-p 20 usec

B8 COLOR TV CHASSIS OVERVIEW The B8 Series Chassis is the Statement (standard line) TV Set produced by Philips Consumer Electronics Company for the 1997 model year. The B8 Chassis is used in TV Sets with 25, and 27 inch CRT's. The B8 Chassis is also used in Commercial TV Sets with 13, 19, 20, 25, and 27 inch CRT's. The chassis orientation is front to rear in the B8 design (sometimes called "North- South"), because the chassis is longer in this direction than across. The B8 Tuning System features 181 Channels with On-Screen Display. The main Tuning System includes the tuner along with the Microcomputer IC and the Memory IC. The Microcomputer communicates with the Memory IC, the Customer Keyboard, the Remote Receiver, the U/V Tuner, the TV Signal Processor, the Stereo Decoder (optional), and the Power On/Off circuitry. The Memory IC retains the settings for Favorite Stations, Customer Control Settings, Mode Switches, and Service/Factory Setup Data. The chassis features a Very Large Scale Integration (VLSI) IC for TV signal processing. This IC performs Video IF, Sound IF, AGC control, Horizontal Signal processing, Vertical Signal processing, Horizontal/Vertical synchronization, and Chrominance/Luminance processing. The On-Screen Graphics information is placed on the main signal within the TV Signal Processor. On- Screen Graphics generation and Closed Caption decoding are processed within the Microcomputer and the signals are sent to the TV Signal Processor. Automatic Volume Level (AVL - called "SMART SOUND" by marketing) control from the Microcomputer is sent to the AVL IC. The "Smart Sound" function is performed within IC720. The B8 Chassis features a Switching Mode Power Supply for the main voltage source. A "HOT" ground reference is used in the primary side of the power supply. A "COLD" (signal) ground from the secondary of the power supply is used throughout the rest of the chassis. AN ISOLATION TRANSFORMER IS REQUIRED WHEN DOING SERVICE ON ANY VERSION OF THE NEW CHASSIS.

SIGNAL FLOW The incoming TV RF signal is applied to the U/V Tuner via the Antenna RF Input. The IF signal is developed within the U/V Tuner, then amplified by an IF Preamplifier located inside the Tuner. The amplified IF signal is sent from Pin 11 of the U/V Tuner to the SAW Filter, Y200. The SAW Filter produces bandpass shaping for the IF signal before it is applied to the TV Signal Processor Integrated Circuit, IC271, for processing. AGC (to the Tuner) and AFT (to the Microcomputer) signals are developed within IC271 and then sent to the Tuning System for RF Amp gain control. Sound IF signal processing for the B8 Chassis is performed by coupling the 4.5MHz Sound IF signal from IC271, Pin 6, via a Buffer Amplifier, Q221, and 4.5MHz Band Pass Filter, Y220, into IC271, Pin 1. Audio is output from Pin 15 in mono versions and applied to the Audio Amp Output IC, IC730, to drive the speakers. For the stereo equipped sets, the detected baseband audio signal exits IC271, Pin 15, and then enters the Stereo Decoder IC200. The Stereo Decoder has Internal/External switching, via the control input on Pin 21, to allow either the detected baseband audio or External Audio from another source to be routed through and exit to IC730 and IC740. Composite video from IC271, Pin 6, is buffered by Q221 and then passed through a 4.5MHz Trap, Y221, to remove any sound products present. This signal is buffered again by Q225 before it goes back to IC271, Pin 13. Depending on the part number of IC271, either BS315 or BS316 will be installed. With BS315 installed, The CC Video comes from Q225. If BS316 is installed, the CC Video comes from Pin 38 of IC271. Internal/External switching of the video is done within IC271. The chroma and luminance signals are then processed by the Chroma/Luminance Process block within IC271. Sync input from the Chroma/Luminance block to the

Horizontal/Vertical Processing block is applied internally within IC271. Brightness, Picture, Sharpness, Color, and Tint control voltages are applied to IC271 from Microcomputer, IC300 via the IIC Bus. The Red, Green, and Blue signals are developed within IC271 and output via Pins 21, 20, and 19. The Black Current Level Set is Output from Pin 18. The Red, Green, and Blue video signals from IC271 are applied to the CRT Board. On the CRT Board, these signals are amplified before being applied to the CRT. The Drive and Cutoff controls for CRT Set-Up are controlled by the microprocessor via the IIC Bus using the Service Test Mode. Horizontal and Vertical signals are also developed within IC271. Adjustments for Horizontal Centering, Vertical Centering, and Vertical Height are accomplished with the Remote Transmitter via the Service Test Mode. There is no adjustment for the Horizontal Oscillator. The horizontal circuit is a count down type of system that gets its base frequency from the 3.58MHz circuit. The horizontal signal is applied to a Horizontal Driver, Q502, where the signal is amplified and transformer coupled to the Horizontal Output transistor, Q503. The output from Q503 drives the Integrated Flyback Transformer. The IFT develops the High Voltage, Screen Voltage, Focus Voltage, and Filament Voltage for the Picture Tube. If the voltage in T501 (T502 for 25 and 27 inch sets) goes high, a sample is sent to Q540 and Q541, the shutdown switch. This will enable lowering the High Voltage when it starts to elevate. Scan derived voltages provided by the IFT for use by the chassis are the 200V, +1 3.5V, and -13.5V Sources. A horizontal pulse is also made available for the chassis from the output circuit of the Horizontal Output transistor. The Vertical signal exits TC271 at Pin 7 and is applied to the Vertical Output Integrated Circuit, IC550. The vertical signal is output from IC550 and applied to the Vertical Yoke. Vertical Centering and Vertical Height adjustments are performed via the Service Test Mode and Remote Transmitter. Vertical feedback is returned to IC550, Pin 1. B8 CHASSIS POWER SUPPLY BLOCK When a 120Vac Source is connected to the B8 Chassis, approximately I60Vdc is developed by

the Bridge Rectifier circuit. The 160 volts dc goes through T425 to the transistor switch. The start up signal is taken from the neutral leg of the input ac line. The Power Supply consists of a single integrated circuit operating as a Free-Running Switching Mode Power Supply. The frequency of operation varies with the circuit load. There is no separate power supply for standby. The Power Supply turns On when AC is applied. The Switching Regulator IC starts switching when the initial voltage is applied through the Start circuit. The Switching Regulator and the Drive circuits turns the Switch On and Off to allow current flow through the primary of transformer T425. Energy stored in the primary during the On-time is delivered to the secondaries during the Off-time. Feedback from the Hot secondary is used to control the Switching Regulator. Positive Voltage from the hot secondary is used as B+ for the Switching Regulator. From the secondaries of T425, the voltages needed to operate the television are developed. The Plus 9 volt output is switched for On/Off control.

All Models (7562) - MAIN CHASSIS (SECTION 1 OF 5)

All Models (7562) - MAIN CHASSIS (SECTION 2 OF 5)

All Models (7562) - MAIN CHASSIS (SECTION 3 OF 5)

All Models (7562) - MAIN CHASSIS (SECTION 4 OF 5)

All Models (7562) - MAIN CHASSIS (SECTION 5 OF 5 )

All Models (7562) - CRT PANEL (13", 19", & 20")

All Models (7562) - CRT PANEL (25" & 27")

All Models (7562) - KEYBOARD/SOUND SHAPER PANEL

All Models (7562) - STEREO PANEL SCHEMATIC

All Models (7562) - OCV TV PANEL SCHEMATIC

All Models (7562) - CARD INTERCONNECT PANEL

All Models (7562) - HEALTH CARE JACK PANEL

All Models (7562) - LODGING/SMART PORT PANEL

All Models (7562) - MAIN CHASSIS PCB (TOP)

All Models (7562) - MAIN CHASSIS PCB (BOTTOM)

All Models (7562) - 13", 19", & 20" CRT PANEL PCB

All Models (7562) - 25", & 27" CRT PANEL PCB

All Models (7562) - KEYBOARD/SOUND SHAPER PCB

All Models (7562) - STEREO PANEL PCB

All Models (7562) - OCV TV PANEL PCB (TOP)

All Models (7562) - OCV TV PANEL PCB (BOTTOM)

All Models (7562) - CARD INTERCONNECT PANEL PCB

All Models (7562) - HEALTH CARE JACK PANEL PCB

All Models (7562) - LODGING/SMART PORT PANEL PCB

Adjustment and Test Point Layout Service Adjustment Notes: Caution: The B8 Chassis incorporates a "Hot" ground system. Always use a separate isolation transformer when applying power to the exposed chassis. Unless Otherwise Specified: 1. All service adjustments are "Hot" voltagewise. For maximum safety, ensure the use of properly insulated tools. 2. Many of the following adjustments are made through software intervention. The remote transmitter supplied with the set may be used in order to modify register values stored within the EEPROM IC on the Main Chassis Board Assembly. The G96SVC Service Remote is an ideal tool for this purpose. Order 4835 219 17656. Refer to the SERVICE MODE covered later. 3. Refer to the Component Location Diagram (Figure 1) for a quick location of test points or service adjustable controls. 4. Grid locations (Ex.: D-2) next to control reference numbers refer to the Main Chassis Printed Circuit Board Illustrations.

Focus 1. Tune to a local station and adjust the Focus Control (located on the Flyback Transformer) for best picture details at high light conditions. Screen Control (G2) Setup (13", 19", & 20") 1. Apply an NTSC Color Bar test pattern, with the color "off", to the antenna input of the TV Receiver. 2. Select the active channel. 3. Set all the customer picture controls to mid-range. 4. Using an oscilloscope measure and note the peak to peak voltage of the CRT Cathodes. Use the legs of R11, R12, and R13 which tie to the CRT socket. 5. Using the cathode with the highest peak to peak voltage, noted in step 4, adjust the Screen Voltage (G2) control (located on the Flyback Transformer) to obtain 120Vp-p. Screen Control (G2) Setup (25" & 27") 1. Apply an NTSC Color Bar test pattern, with the color "off", to the antenna input of the TV Receiver. 2. Select the active channel. 3. Set all the customer picture controls to mid-range. 4. Using an oscilloscope measure and note the peak to peak voltage of the CRT Cathodes. Use the legs of R60, R61, and R62 which tie to the CRT socket. 5. Using the cathode with the highest peak to peak voltage, noted in step 4, adjust the Screen Voltage (G2) control (located on the Flyback Transformer) to obtain 120Vp-p. Adjusting The Picture Note: The Color Purity and Convergence Adjustments described below should be performed only after installation of a new CRT or Deflection Yoke Assembly otherwise, it will not be necessary to remove the rubber wedges. Minor corrections for purity and convergence

can be accomplished through the use of the Purity and Convergence Assembly located on the neck of the CRT. Degaussing the Receiver 1. Position the TV receiver so that the screen faces the same direction (North, South, East, or West) that it will be facing while in use. 2. Before the set is turned on, thoroughly Degauss the entire receiver. a) Move a Degaussing Coil in a circular motion slowly around the sides and the front face plate of the receiver. b) Withdraw the Degaussing Coil from the receiver at least six feet before disconnecting it from its power source. Pre-Convergence Adjustments (Perform Degauss Procedure first) 1. Place the multi-pole Purity and Convergence Assembly with the 2-Y pole Purity Rings directly in the gap between the G2 and G3 (Focus Grids). (As shown in Figure 2) 2. Connect a Center Cross or Crosshatch pattern to the Antenna terminals. 3. Enter Service Page "G" (White Balance). Set the Green control to minimum. 4. Loosen the Yoke Clamp screws, pull the Yoke back and remove the three Yoke wedges. 5. Slide the yoke all the way forward so that it rests against the bell of the CRT. 6. Tighten the Yoke Clamp screw so that the Yoke does not drop away from the bell of the CRT. 7. Slowly spread and, if necessary, rotate the 2-Y pole purity rings so that the red and blue lines are at least parallel and preferably coincide at the 6:00 and 12:00 position. 8. Do not exit Service Page "G".

Color Purity Adjustment 1. Connect a White Screen signal to the Antenna terminals. 2. Use Service Page G to set the Green control to maximum. Set the Blue control to minimum. 3. Enter Service Page A. 4. Note that the set is in bank ("00"). 5. Press the Channel Up (Cursor Up) button on the Remote transmitter to change the Register to 68. 6. Note the Value stored in Register 68 Value... 7. Press the Volume down button on the Remote Transmitter to set the value to its minimum (00). 8. Slowly spread the 2-X Pole Purity Rings to center the Green portion of the screen leaving the same amount of Red on the right side as there is Blue on the left. 9. Loosen the Yoke Clamp screws and slide the Yoke back to the point of best Green Purity. 10. Tighten the Yoke Clamp screw slightly so that the Yoke can still be moved with some friction. 11. Proceed to Static Center Convergence. 12. Re-enter Service Page A, Bank 00 and Register 68. 13. Reset this register to the value noted in step 6. 14. Re-enter Service Page G and reset the Green and Blue Registers to their mid-range positions.

Static Center Convergence Review Pre-Convergence Information 1. Connect a Center Cross pattern or a Crosshatch pattern to the Antenna input to ensure that the yoke is not tilted. Rotate the yoke, if necessary, to obtain a level raster. 2. Use Service Page G to set the Green control to minimum. 3. Set the Blue control to its mid-range position. 4. Slowly spread and, if necessary, rotate the 4-Pole Magnetic Rings to converge Red and Blue lines at the center of the screen. 5. Reset the Green Control to mid-range. 6. Slowly spread and, if necessary, rotate the 6-Pole Magnetic Rings to converge Red/Blue on Green lines at the center of the screen. 7. Repeat the procedure for optimum performance. Dynamic Edge Convergence Review Pre-Convergence Information Note: Three rubber wedges are used to secure the correct position of the Deflection Yoke They are to ultimately be placed as shown in figure C or F of this display. 1. Apply a crosshatch pattern signal to the antenna input. 2. Use Service Page "G" to set the green control to minimum. 3. Tilt the Yoke Up and Down to converge the Red and Blue vertical lines at the 6 and 12 o'clock positions and the Red and Blue Horizontal lines at the 3 and 9 o'clock positions 4. When the correct position has been found, place a rubber wedge between the Yoke and the CRT. If the yoke is tilted UP, place wedge 1 as shown in Figure A. If the Yoke is tilted DOWN, place wedge 1 as shown in Figure D. 5. Tilt the Yoke to the left and right to find the point of best possible convergence of the Red and Blue lines at the edges, top and bottom of the screen.

When the correct position is located, place wedges 2 and 3 as seen in Figure B or E of the 6. Now remove wedge 1 and place it as shown in Figure C or F. 7. Set the green control back to its mid-range position. 8. Proceed to the White Balance procedure. SERVICE MODE Note: Many of the following adjustments are made through software intervention. A Remote Transmitter is required in order to modify register values stored within the EEPROM IC on the Main Chassis Board. The G96SVC Service Remote is an ideal tool for this purpose. Order 4835 219 17656. The service mode makes it possible to change the values of special memory registers in the EEPROM IC (IC302). These registers affect the customer adjustments and other functions. These registers also make many other service adjustments possible that previously would have been handled by conventional controls mounted on the P.C. Board. Service Mode Entry and Exit: Using the remote transmitter, enter the following seven-button sequence to activate the Service Mode: 06-25-96-Menu Note: This sequence must be entered consecutively without allowing the on screen display to time out between entries. Exit Service Mode To exit the Service Test Mode procedure enter Service Page I and press the Volume Up button on the remote transmitter.

To save the current modification of the register data, disconnect the set from its AC source. When the receiver is operating in the Service Mode, all normal on-screen displays are suppressed and replaced by a special display. Service Mode Display The first letter on the top line is an S. This letter indicates that the set is in the Service Mode. The second letter indicates which Service Page the set is currently in. The number showing at the top right corner of the display is the currently tuned channel. The number shown in the upper middle of the display (31350100661) is the current level of software in use.

Spare Parts List MAIN CHASSIS CAPACITORS C208 22uF., 50V, 20%, Electrolytic..... 4835 124 47503 C222 4700pF., 10%, 50V, Carbon (All 19", 25", & 27" Models w/dbx, LCS, & Mono).. 4835 122 87415 C222 47pF., 5%, 50V, Carbon (All 25" & 27" M odels w/dbm Stereo).......... 4835 122 87017 C222 100pF., 5%, 50V, Carbon (All 25" & 27" Models w/lc Stereo).......... 4835 122 87012 C223 330pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87287 C224 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C225 0.470uF.,100V, Polyester....... 4835 121 47222 C226 0.1uF., 100V, Polyester........ 4822 121 41608 C228 1uF, 50V, 20%, Electrolytic...... 4835 121 47406 C229 0.1uF., 63V, Polyester........ 4835 121 47602 C230 3300pF, 50V, 10%, Ceramic....... 4835 122 87294 C231 4700pF, 50V, 10%, Ceramic....... 4835 122 87415 C232 1uF, 50V, 20%, Electrolytic...... 4835 121 47406 C233 2200pF 50V, 10%, Ceramic....... 4835 122 87544 C236 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C237 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C238 100pF, 50V, 5%, Ceramic........ 4835 122 87012 C239 100pF, 50V, 5%, Ceramic........ 4835 122 87012 C244 100pF, 50V, 10%, Ceramic....... 4835 122 87061 C245 2.2uF.,50V, 20%, Electrolytic..... 4835 124 47502 C246 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C247 100pF., 10%, 50V, Ceramic (Certain Mode ls only)............... 4835 122 47004 C248 0.1uF., 63V, Polyester (Certain Models only)................. 4835 121 47602 C249 0.1uF., 63V, Electrolytic....... 4835 121 47602 C250 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C251 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C252 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C253 22uF., 50V, 20%, Electrolytic..... 4835 124 47503 C254 100pF., 50V, 10%, Ceramic....... 4835 122 87023 C255 10uF., 50V, 20%, Electrolytic..... 4835 124 47499 C256 27pF., 50V, 5%, Ceramic........ 4835 122 47607 C257 27pF., 50V, 5%, Ceramic........ 4835 122 47607 C258 27pF., 50V, 5%, Ceramic........ 4835 122 47607 C260 100uF., 10V, Electrolytic....... 4835 124 47704 C261 2200pF 50V, 10%, Ceramic....... 4835 122 87538 C262 1000pF 50V, 10%, Ceramic....... 4835 122 87024 C264 15pF., 50V, 5%, Ceramic........ 4835 122 87592 C266 2200pF., 50V, 10%, Ceramic...... 4835 122 87538 C267 470uF., 16V, Electrolytic....... 4835 121 47387 C268 0.1uF., 50V, 10%, Ceramic....... 4835 122 87061 C274 82pF., 50V, 5%, Ceramic........ 4835 122 47612 C275 0.1uF., 63V, Polyester (Certain Models only)................. 4835 121 47602 C280 4700pF., 50V, 10%, Ceramic...... 4835 122 87503 C291 220uF., 50V, Electrolytic....... 4835 124 47703 C293 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C294 100uF., 10V, Electrolytic....... 4835 124 47704 C307 4700pF., 50V, 10%, Ceramic...... 4835 122 87503 C310 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C311 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C314 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C315 0.022uF.,50V, 10%, Ceramic...... 4835 122 87538 C316 22uF., 25V, 20%, Electrolytic..... 4835 124 47707 C317 1000pF., 50V, 10%, Ceramic...... 4835 122 87023 C318 1000pF., 50V, 10%, Ceramic...... 4835 122 87023 C320 15pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87592 C321 0.01pF., 50V, 10%, Ceramic...... 4835 122 87024 C322 15pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87592 C323 100pF., 50V, 5%, Ceramic....... 4835 122 87012 C325 0.01pF., 50V, 10%, Ceramic...... 4835 122 87024 C337 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C338 0.01pF., 50V, +80%, -20%, Ceramic... 4835 122 47616 C339 100pF., 50V, 5%, Ceramic....... 4835 122 87012 C340 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C341 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C342 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C343 33pF., 50V, 5%, Ceramic........ 4835 122 87414 C344 4.7uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47506 C350 47uF., 16V, 20%, Electrolytic..... 4835 124 47567 C351 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C357 39pF., 5%, 50V, Carbon (Used in Commerc ial Models).............. 4835 122 87016 C358 33pF., 50V, 5%, Ceramic (Used in Commer cial Models)............. 4835 122 87414 C375 2.2uF, 50V, 20%, Electrolytic..... 4835 124 47502 C376 1000pF., 10%, 50V, Carbon (Used in Comm ercial Models)............ 4835 122 87023 C377 0.033uF., 10%, 50V, Carbon (Used in Non -Commercial Models).......... 4835 122 87452 S = Safety Part Be sure to use exact replacement part. C381 0.01pF., 50V, 10%, Ceramic...... 4835 122 87024 C383 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C384 470pF., 50V, 10%, Ceramic....... 4835 122 47614 C390 100pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87012 C391 100pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87012 C392 100pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87012 S C400 0.220uF., 250V, Mylar......... 4835 121 47597 C401 2200pF., 250VAC, Ceramic (All 19" w/svh S & 20", 25", & 27" Latam Models w/amv) 4835 122 47619 C401 4700pF., 250VAC, Ceramic (All 19", 20", 25", & 27" & All Latam Models w/out AM 4835 122 97023 C405 470uF., 400V, Electrolytic (All 19" w/s VHS & 20", 25", & 27" Latam Models w/am 4835 124 47717 C405 680uF., 200V, Electrolytic (All 25", & 27" Commercial/Latam Models w/out AMV) 4835 124 47674 C405 680uF., 200V, Electrolytic (All 19" & 2 0" Latam Models w/out AMV)...... 4835 124 47064 C407 0.015uF., 400V, Polyester....... 4835 121 47203 C408 0.120uF., 63V, Polyester....... 4835 121 47001 C409 0.015uF., 400V, Polyester....... 4835 121 47203 C410 47uF., 25V, 20%, Electrolytic..... 4835 124 47708 C411 2200pF., 50V, 10%, Ceramic...... 4835 122 87544 C412 10uF., 50V, 20%, Electrolytic..... 4835 124 47499 C413 2200pF., 50V, 10%, Ceramic...... 4835 122 87544 C414 470pF., 50V, 10%, Ceramic....... 4835 122 47614 C415 1000pF., 1KV, 10%, Ceramic...... 4835 122 47373 C416 0.1uF, 50V, Ceramic.......... 4835 122 87375 C418 1000pF, 500V, 10%, Ceramic...... 4835 122 47384 C419 1000uF., 16V, Electrolytic...... 4835 124 47699 C423 1000uF., 1KV, 10%, Ceramic...... 4835 122 47373 C426 4700pF., 20%, 125V, Ceramic (Certain Mo dels only).............. 4835 122 47618 C427 1000uF., 500V 10%, Ceramic...... 4835 122 47384 C430 680pF., 1KV, 10%, Ceramic....... 4835 122 47633 C431 100uF., 200V, Electrolytic...... 4835 124 47038 C433 1000pF., 1KV, 10%, Ceramic...... 4835 122 47373 C435 470pF., 1KV, 10%, Ceramic....... 4835 122 47459 C437 470pF., 1KV, 10%, Ceramic....... 4835 122 47459 C441 0.010uF, 50V, 10%, Ceramic...... 4835 122 87024 C442 3900pF., 500V, 10%, Ceramic...... 4835 122 47623 C443 1000uF., 25V, Electrolytic...... 4835 124 47583 C445 1000uF., 500V 10%, Ceramic...... 4835 122 47384 C447 1000uF., 16V, Electrolytic...... 4835 124 47699 C448 3900pF., 500V, 10%, Ceramic...... 4835 122 47623 C450 2200uF., 25V, Electrolytic...... 4835 124 47593 C451 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C453 0.120uF., 63V, Polyester....... 4835 121 47001 C457 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C460 1000uF., 500V, 10%, Ceramic...... 4835 122 47384 C461 1uF., 250V, Electrolytic....... 4835 124 47536 C462 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C463 0.100uF., 250V, Electrolytic..... 4835 121 47278 S C498 4700pF., 250V, Ceramic........ 4835 122 97023 C501 0.010uF., 50V, +80%, -20%, Ceramic.. 4835 122 47616 C502 470pF., 500V, 10%, Ceramic...... 4835 122 47211 C503 1000pF., 500V, 10%, Ceramic...... 4835 122 47384 C504 0.100uF., 250V, Electrolytic..... 4835 121 47278 S C505 0.010uF.,1.6kV, Polypropylene (All 25" & 27" Models)............. 4835 121 47611 S C505 4700pF., 1.6kV, Polypropylene (19", 20", 25", 27" Commercial Models w/ Smart P 4835 121 47613 S C505 3900pF., 5%, 2kV, Polypropylene (19" Co mmercial & LATAM w/ Toshiba CRT)... 4835 121 47619 S C506 470pF., 10%, 2kV, Ceramic (19" Commerci al & LATAM w/ Toshiba CRT)...... 4835 122 47638 S C506 270pF., 10%, 2kV, Ceramic (19" Commerci al w/ Toshiba CRT).......... 4835 122 47075 S C506 330pF., 10%, 2kV, Ceramic (20" Commerci al w/ Toshiba CRT).......... 4835 122 47637 S C506 680pF., 10%, 2kV, Ceramic (All 20" Lata m & all 25" Models).......... 4835 122 47584 S C506 820pF., 10%, 2kV, Ceramic (All 27" Mode ls).................. 4835 122 47639 C507 0.270uF., 250V, Polypropylene (All 20" Latam Models)............. 4835 121 47618 C507 0.360uF., 250V,.Polypropylene (All 20" Commercial models w/out Channel 1).. 4835 121 47606 C507 0.430uF., 250V, Polypropylene (All 27" Models & 20" Latam Models)...... 4835 121 47607 C507 0.470uF., 250V, Polypropylene (All 25" Models w/out Smart Port)....... 4835 121 47608 C508 1500pF., 10%, 500V, Ceramic (All 20", 2 5", & 27" Models)........... 4835 122 47409 C511 100pF., 2KV, 10%, Ceramic....... 4835 122 47631 C512 15uF., 50V, 20%, Electrolytic..... 4835 124 47606 C513 15uF., 50V, 20%, Electrolytic..... 4835 124 47606 C514 15uF., 50V, 20%, Electrolytic..... 4835 124 47606 C520 1uF., 50V, 20%, Electrolytic..... 4835 121 47406 C521 100pF., 50V, 5%, Ceramic....... 4835 122 87012

Spare Parts List (continued) C530 10uF., 50V, 20%, Electrolytic..... 4835 124 47499 C550 0.100uF., 63V, Electrolytic...... 4835 121 47602 C551 0.220uF., 63V, Electrolytic...... 4835 121 47603 C552 220pF., 50V, 5%, Ceramic....... 4835 122 87376 C553 470pF., 500V, 10%, Ceramic...... 4835 122 47211 C554 470pF., 500V, 10%, Ceramic...... 4835 122 47211 C556 0.100uF., 63V, Polyester....... 4835 121 47602 C557 100uF., 50V, Electrolytic....... 4835 124 47563 C559 1000pF., 50V, 10%, Ceramic...... 4835 122 87023 C560 1000pF., 50V, 10%, Ceramic...... 4835 122 87023 C568 47uF., 250V, Electrolytic....... 4835 124 47137 C571 10uF., 50V, 20%, Electrolytic..... 4835 124 47499 C573 047uF., 250V, Polyester........ 4835 121 47601 C700 100uF., 25V, Electrolytic (Certain Mode ls only)............... 4835 124 47501 C701 4700pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87415 C702 0.22uF., 63V, Polyester (Certain Models only)................. 4835 121 47603 C703 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C704 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C705 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C706 0.022uF., 10%, 50V, Carbon (Certain Mod els only)............... 4835 122 87538 C707 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C708 0.1uF., 63V, Polyester (Certain Models only)................. 4835 121 47602 C709 1.0uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 121 47406 C710 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C711 2700pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87502 C712 0.1uF., 63V, Polyester (Certain Models only)................. 4835 121 47602 C713 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C714 2.2uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47502 C715 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C716 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C718 100pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87012 C719 100pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87012 C720 100pF., 10%, 50V, Carbon (Certain Model s only)................ 4835 122 87023 C721 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C722 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C723 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C724 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C725 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C726 10pF., 0.5%, 50V, Carbon (Certain Model s only)................ 4835 122 87412 C727 10pF., 0.5%, 50V, Carbon (Certain Model s only)................ 4835 122 87412 C728 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C729 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C730 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C731 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C732 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C733 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C734 100uF., 25V. Electrolytic (Certain Mode ls only)............... 4835 124 47501 C735 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C736 0.22uF., 50V, Carbon (Certain Models on ly).................. 0483 512 28708 C737 0.22uF., 50V, Carbon (Certain Models on ly).................. 0483 512 28708 C738 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C739 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C740 47uF., 20%, 25V, Electrolytic (Certain Models only)............. 4835 124 47708 C741 1000pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87023 C743 0.027uF., 10%, 50V, Electrolytic (Certa in Models only)............ 4835 121 47586 C744 2200pF., 50V, 10%, Ceramic (Certain Mod els only)............... 4835 122 87544 C745 0.47uF., 100V, Polyester (Certain Model s only)................ 4835 121 47222 C746 2200pF., 50V, 10%, Ceramic (Certain Mod els only)............... 4835 122 87544 C747 0.033uF., 10%, 50V, Electrolytic (Certa in Models only)............ 4835 121 47587 C748 2200pF., 50V, 10%, Ceramic (Certain Mod els only)............... 4835 122 87544 C770 1000uF., 25V, Electrolytic...... 4835 124 47583 C772 10uF., 50V, 20%, Electrolytic..... 4835 124 47499 C773 22uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47503 C780 0.22uF., 63V, Polyester (Certain Models only)................. 4835 121 47603 C781 0.22pF., 63V, Polyester (Certain Models only)................. 4835 121 47603 C784 0.12uF., 63V, Polyester (Certain Models only)................. 4835 121 47001 C785 0.12uF., 63V, Polyester (Certain Models only)................. 4835 121 47001 C790 330pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87287 C791 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C792 330pF., 5%, 50V, Carbon (Certain Models only)................. 4835 122 87287 C793 10uF., 20%, 50V, Electrolytic (Certain Models only)............. 4835 124 47499 C794 3300pF., 10%, 50v, Carbon (Certain Mode ls only)............... 4835 122 87294 C796 3300pF., 10%, 50V, Carbon (Certain Mode ls only)............... 4835 122 87294 RESISTORS R218 220 ohm, 5%, 1/10W, Metal Film.... 4835 111 37371 R219 15k, 5%, 1/10W, Metal Film...... 4835 111 37458 R222 15k, 5%, 1/2W, Metal Film....... 4835 116 57698 R224 620k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57734 R225 39.0k, 1%, 1/10W, Metal Film..... 4835 111 27041 R226 2.2 ohm, 5%, 1/3W, Metal Film..... 4822 052 10228 R229 82k, 5%, 1/10W, Metal Film...... 4835 111 37277 R230 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R231 1.0k, 5%, 1/8W, Metal Film...... 4835 111 37022 R232 15k, 5%, 1/10W, Metal Film...... 4835 111 37458 R233 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R234 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R235 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R236 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R240 2.2 ohm, 5%, 1/2W, Metal Film..... 4835 116 57653 R243 75 ohm, 5%, 1/10W, Metal Film (Certain Models only)............. 4835 111 37276 R244 620 ohm, 5%, 1/2W, Metal Film..... 4835 116 57733 R245 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R246 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R247 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R248 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R249 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R250 1.0k, 5%, 1/8W, Metal Film...... 4835 111 37022 R251 150 ohm, 5%, 1/4W, Metal Film..... 4835 111 37058 R252 2.2k, 5%, 1/10W, Metal Film...... 4835 111 37234 R253 22 ohm, 5%, 1/2W, Metal Film..... 4835 116 57708 R255 220 ohm, 5%, 1/10W, Metal Film.... 4835 111 37371 R256 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R266 10 ohm, 5%, 1/3W, Metal Film..... 4822 111 30508 R273 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R275 10 ohm, 5%, 1/3W, Metal Film (Certain M odels only).............. 4822 111 30508 R276 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R277 75 ohm, 5%, 1/2W, Metal Film (Certain M odels only).............. 4835 116 57739 R280 180 ohm, 5%, 1/10W, Metal Film.... 4835 111 37229 R281 180 ohm, 5%, 1/10W, Metal Film.... 4835 111 37229 R291 15k, 5%, 1/2W, Metal Film....... 4835 116 57698 R292 15k, 5%, 1/2W, Metal Film....... 4835 116 57698 R293 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 57097 S R294 39 ohm, 5%, 1W, Metal Oxide...... 4835 116 67259 R296 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R298 68 ohm, 5%, 1/10W, Metal Film..... 4835 111 37408 R301 15k, 5%, 1/10W, Metal Film...... 4835 111 37458 R302 75k, 5%, 1/10W, Metal Film...... 4835 111 27055 R303 10k, 5%, 1/10W, Metal Film...... 4835 111 37216 R304 6.2k, 5%, 1/10W, Metal Film (All Non-Co mmercial Models)........... 4835 111 37269 R304 5.6k, 5%, 1/10W, Metal Film (All Commer cial Models)............. 4835 111 37376 S = Safety Part Be sure to use exact replacement part.

Spare Parts List (continued) R305 10.0 ohm, 5%, 1/8W, Metal Film.... 4835 111 37132 R306 43k, 5%, 1/10W, Metal Film...... 4835 111 37374 R307 2.2k, 5%, 1/10W, Metal Film (All Non-Co mmercial Models)........... 4835 111 37234 R307 3.3k, 5%, 1/10W, Metal Film (All Commer cial Models)............. 4835 111 37247 R308 4.7k, 5%, 1/10W, Metal Film...... 4835 111 27052 R309 10.0k, 1%, 1/6W, Metal Film...... 4822 116 53022 R310 3.3k, 5%, 1/10W, Metal Film (All Non-Co mmercial Models)........... 4835 111 37247 R310 2.2k, 5%, 1/10W, Metal Film (All Commer cial Models)............. 4835 111 37234 R311 330 ohm, 5%, 1/10W, Metal Film.... 4835 111 37443 R312 330 ohm, 5%, 1/10W, Metal Film.... 4835 111 37443 R313 4.7k, 5%, 1/10W, Metal Film...... 4835 111 27052 R316 56k, 5%, 1/10W, Metal Film...... 4835 111 37477 R318 330 ohm, 5%, 1/2W, Metal Film..... 4835 116 57713 R319 4.7k, 5%, 1/2W, Metal Film...... 4835 116 57724 R320 330 ohm, 5%, 1/2W, Metal Film..... 4835 116 57713 R321 510k, 5%, 1/10W, Metal Film (All Non-Co mmercial Models )........... 4835 111 27053 R321 0 Ohm, Metal Film (All Commercial Model s ).................. 4835 111 27056 R325 100 ohm, 5%, 1/10W, Metal Film.... 4835 111 37432 R326 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R327 100 ohm, 5%, 1/10W, Metal Film.... 4835 111 37432 R328 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R330 4.7k, 5%, 1/2W, Metal Film...... 4835 116 57724 R331 5.6k, 5%, 1/10W, Metal Film...... 4835 111 37376 R332 5.6k, 5%, 1/10W, Metal Film...... 4835 111 37376 R333 5.6k, 5%, 1/10W, Metal Film...... 4835 111 37376 R334 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R338 27k, 5%, 1/2W, Metal Film....... 4835 116 57712 R340 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R341 1.1k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57688 R342 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R343 470 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57723 R344 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R345 10k, 5%, 1/10W, Metal Film...... 4835 111 37216 R346 47k, 5%, 1/2W, Metal Film....... 4835 116 57725 R347 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R348 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R349 22k, 5%, 1/2W, Metal Film....... 4835 116 57706 R350 47 ohm, 5%, 1/3W, Metal Film..... 4835 116 57745 R351 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R352 2.7k, 5%, 1/2W, Metal Film...... 4835 116 57711 R353 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R354 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R355 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R357 4.7k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57724 R358 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R359 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R360 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R361 10k, 5%, 1/10W, Metal Film (Certain Mod els only)............... 4835 111 37216 R362 10k, 5%, 1/10W, Metal Film...... 4835 111 37216 R363 10k, 5%, 1/10W, Metal Film...... 4835 111 37216 R364 100 ohm, 5%, 1/8W, Metal Film..... 4835 111 37021 R365 4.7k, 5%, 1/10W, Metal Film...... 4835 111 27052 R367 1.5k, 5%, 1/10W, Metal Film...... 4835 111 37437 R368 820 ohm, 5%, 1/10W, Metal Film.... 4835 111 37466 R369 820 ohm, 5%, 1/10W, Metal Film.... 4835 111 37466 R370 820 ohm, 5%, 1/10W, Metal Film.... 4835 111 37466 R371 2.2k, 5%, 1/10W, Metal Film...... 4835 111 37234 R372 560 ohm, 5%, 1/10W, Metal Film.... 4835 111 27054 R373 560 ohm, 5%, 1/10W, Metal Film.... 4835 111 27054 R374 560 ohm, 5%, 1/10W, Metal Film.... 4835 111 27054 R375 1.5k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 37437 R377 10k, 5%, 1/10W, Metal Film...... 4835 111 37216 R378 820 ohm, 5%, 1/10W, Metal Film.... 4835 111 37466 R379 1.0k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 37217 R380 330 ohm, 5%, 1/10W, Metal Film (All Non -Commercial Models).......... 4835 111 37443 R380 22k, 5%, 1/10W, Metal Film (All Commerc ial Models).............. 4835 111 37441 R381 1.0 ohm, 5%, 1/2W, Metal Film..... 4835 110 27012 R384 10 ohm, 5%, 1/10W, Metal Film..... 4835 111 37363 R385 10 ohm, 5%, 1/10W, Metal Film..... 4835 111 37363 R386 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R387 470 ohm, 5%, 1/2W, Metal Film..... 4835 116 57723 R390 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R391 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R392 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R393 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R400 4.7 ohm, 5%, 1/2W, Metal Film..... 4835 116 57009 S R401 4.7 ohm, 5%, 1/2W, Metal Film..... 4835 116 57009 R402 1.5 ohm, 5%, 10W, Wire........ 4835 112 37029 R403 1.5 ohm, 5%, 10W, Wire (Certain Models only)................. 4835 112 37029 R404 10 ohm, Thermistor (Certain Models only 4835 116 47001 R405 2.0k, 5%, 1/2W, Metal Film...... 4835 116 57703 S R407 9 ohm, Thermistor (Certain Models only 4835 116 47015 R408 68k, 5%, 1/2W, Metal Film....... 4835 116 57737 R410 2 ohm, 5%, 1/2W, Metal Film...... 4835 116 57276 R411 3.3k, 5%, 1/2W, Metal Film...... 4835 116 57714 R412 3.3k, 5%, 1/2W, Metal Film...... 4835 116 57714 R413 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 67131 R414 7.5k, 1%, 1/6W, Metal Film...... 4822 116 53028 R416 680 ohm, 5%, 1/2W, Metal Film..... 4835 116 57735 R417 0.22 ohm, 5%, 2W, Metal Oxide..... 4835 116 57572 R418 33k, 5%, 1W, Metal Oxide (All 19", 20", 25", & 27" & All Latam Models w/out AM 4835 116 67231 R418 68k, 5%, 1W, Metal Oxide (All 19" w/svh S & 20", 25", & 27" Latam Models w/amv) 4835 116 67231 R419 560 ohm, 5%, 1/2W, Metal Film..... 4835 116 57731 S R420 1.0 ohm, 5%, 1/3W, Metal Film..... 4835 116 57109 R421 1K.................. 4835 103 17001 R422 23.2k, 1%, 1/6W, Metal Film...... 4835 116 57677 R423 100 ohm, 5%, 2W, Metal Oxide..... 4835 116 67239 R424 100 ohm, 5%, 2W, Metal Oxide..... 4835 116 67239 S R425 0.22 ohm, 5%, 1W, Metal Oxide..... 4835 116 67254 S R429 82 ohm, 5%, 2W, Metal Oxide...... 4835 116 67233 S R431 68 ohm, 5%, 2W, Metal Oxide...... 4835 116 57573 S R436 82 ohm, 5%, 2W, Metal Oxide...... 4835 116 67233 R442 5.6 ohm, 5%, 1/2W, Metal Film..... 4835 116 67183 S R444 30 ohm, 5%, 3W, Metal Film (All Models w/2 Channel S)............ 4835 116 67168 S R444 15 ohm, 5%, 3W, Metal Oxide (All 19", 2 5", & 27" Comm. & Latam Models w/lcs). 4835 116 67244 S R445 1.0 ohm, 5%, 1/3W, Metal Film..... 4835 116 57109 S R446 1.0 ohm, 5%, 2W, Metal Oxide (Certain M odels only).............. 4835 116 67235 R447 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 57097 R448 9.1 ohm, 5%, 1/2W, Metal Oxide.... 4835 116 57046 R450 150 ohm, 5%, 1W, Metal Oxide..... 4835 116 67252 R451 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R452 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R457 510 ohm, 5%, 1/2W, Metal Oxide.... 4835 116 57728 S R460 2.2 ohm, 5%, 1/3W, Metal Film..... 4822 052 10228 R461 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R462 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 57097 R463 330k, 5%, 1/2W, Metal Film...... 4835 116 57716 R464 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 57097 R466 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 57097 S R467 68 ohm, 5%, 2W, Metal Oxide...... 4835 116 57573 R469 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 67131 R470 10 ohm, 5%, 1/2W, Metal Film..... 4835 116 67131 R501 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R502 5.6k, 5%, 1/2W, Metal Film...... 4835 116 57732 R503 5.1k, 5%, 1/2W, Metal Film...... 4835 116 57729 R504 2.7k, 5%, 5W, Metal Oxide (All 25" & 27 " Models)............... 4835 116 67257 R504 4.7k, 5%, 5W, Metal Oxide (All 19" Mode ls only)............... 4835 116 67258 S R507 680 ohm, 5%, 1/2W, Metal Film (All 20", 25", & 27" Models).......... 4835 116 57381 R508 560 ohm, 5%, 1/2W, Metal Film..... 4835 116 57731 R509 470 ohm, 5%, 1/2W, Metal Film..... 4835 116 57723 R510 20k, 5%, 1W, Metal Oxide....... 4835 116 57568 R511 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R512 300k, 5%, 1/2W, Metal Film...... 4835 116 57747 R513 3.3k, 5%, 1/2W, Metal Film...... 4835 116 57714 S R515 47 ohm, 5%, 1/3W, Metal Film..... 4835 116 57745 R520 1.0k, 5%, 1/8W, Metal Film...... 4835 111 37022 R521 100 ohm, 5%, 1/2W, Metal Film..... 4835 116 57684 R524 47k, 5%, 1/2W, Metal Film....... 4835 116 57725 S R530 1.0 ohm, 5%, 1/3W, Metal Film..... 4835 116 57109 R533 10k, 1%, 1/6W, Metal Film (25" Non-Lata m Smart Picture & Smart Port Models). 4822 116 53022 R533 10.5k, 1%, 1/6W, Metal Film (27" Non-La tam Models).............. 4835 116 57673 R533 9.09k, 1%, 1/6W, Metal Film (19" Non-Ca rd, 20" Models plus 25" Latam & 25" w/o 4835 116 57274 R534 3.00k, 1%, 1/6W, Metal Film...... 4835 116 57678 R538 16k, 5%, 1/2W, Metal Film (25" & 27" Mo dels Only).............. 4835 116 57492 R538 22k, 5%, 1/2W, Metal Film (All 19", 20" & 25" w/mono & 25" &27" Latam Models). 4835 116 57706 S = Safety Part Be sure to use exact replacement part.

Spare Parts List (continued) R539 820k, 5%, 1/2W, Metal Film...... 4835 116 57743 R541 120k, 5%, 1/2W, Metal Film...... 4835 116 57693 R542 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R545 2.2k, 5%, 1/2W, Metal Film...... 4835 110 47006 R546 330 ohm, 5%, 1/2W, Metal Film..... 4835 116 57713 R547 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R548 20k, 5%, 1/2W, Metal Film....... 4835 116 57704 R551 470 ohm, 5%, 1/2W, Metal Film (25" & 27 " Models Only)............ 4835 116 57723 R551 820 ohm, 5%, 1/2W, Metal Film (All 19", 20" & 25" w/mono & 25" &27" Latam Mode 4835 116 57741 R552 0.47 ohm, 5%, 1/2W, Metal Film (25" & 2 7" Models Only)............ 4835 116 57139 R552 1 ohm, 5%, 1/2W, Metal Film (All 19", 2 0" & 25" w/mono & 25" &27" Latam Models 4835 116 57109 R553 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R554 1.0k, 5%, 1/2W, Metal Film...... 4835 116 57685 R555 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R556 1.0k, 5%, 1/10W, Metal Film...... 4822 051 10102 R557 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R558 1.5 ohm, 5%, 1/2W, Metal Film (All Comm ercial Models)............ 4835 116 67073 R564 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R571 2.2k, 5%, 1/2W, Metal Film...... 4835 110 47006 R573 470 ohm, 20%, 1/2W, Carbon...... 4835 110 47212 R578 27k, 5%, 1/2W, Metal Film....... 4835 116 57712 R700 51 ohm, 5%, 1/2W, Metal Film (Certain M odels only).............. 4835 116 67086 R701 5.6k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57732 R702 3.3k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57714 R703 15k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57698 R704 1.5k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57697 R705 13k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57695 R706 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R707 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R708 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R709 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R712 22k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57706 R713 10k, 5%, 1/10W, Metal Film (Certain Mod els only)............... 4835 111 37216 R714 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R715 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R716 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R717 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R718 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R720 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R721 1.2k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 27042 R722 820 ohm, 5%, 1/8W, Metal Film (Certain Models only)............. 4835 111 37123 R723 470 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57723 R724 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R725 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R726 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R727 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R728 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R729 100k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57687 R730 1.0 ohm, 5%, 1/3W, Metal Film (Certain Models only)............. 4835 116 57109 R731 470k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 37407 R732 470k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 37407 R733 1.0k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4822 051 10102 R734 1.0k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4822 051 10102 R735 3.3k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57714 R736 3.3k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 37247 R737 100 ohm, 5%, 1/10W, Metal Film (Certain Models only)............. 4835 111 37432 R738 100 ohm, 5%, 1/10W, Metal Film (Certain Models only)............. 4835 111 37432 R739 22k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57706 S R740 10 ohm, 5%, 1/3W, Metal Film (Certain M odels only).............. 4822 111 30508 R741 2.2k, 5%, 1/10W, Metal Film (Certain Mo dels only).............. 4835 111 27047 R742 470 ohm, 5%, 1/10W, Metal Film (Certain Models only)............. 4835 111 37259 R743 6.8k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57736 R744 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R745 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R746 0 ohm Metal Film (Certain Models only) 3198 021 90010 R747 1.8k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57702 R749 3.3k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57714 R751 1.8k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57702 R753 470k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57726 R754 3.3k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57714 R755 3.3k, 5%, 1/2W, Metal Film (25"LCS & 3 Jack Panels, 27" LCS)......... 4835 116 57714 R755 470 ohm, 5%, 1/2W, Metal Film (Certain 19" & 20" Models........... 4835 116 57723 R755 470 ohm, 5%, 1/2W, Metal Film (25"Latam, 25" Commercial w/smart Port, 25" Non- 4835 116 57723 R755 470 ohm, 5%, 1/2W, Metal Film (27"Latam, 27" Commercial Non-Card Ready)... 4835 116 57723 R755 15k, 5%, 1/2W, Metal Film (EMB855 Only) 4835 116 57698 R757 470k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57726 R759 22k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57706 R761 22k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57706 R762 51k, 5%, 1/10W, Metal Film (Certain Mod els only)............... 3198 021 55130 R763 51k, 5%, 1/10W, Metal Film (Certain Mod els only)............... 3198 021 55130 R764 1.8k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57702 R770 10k, 5%, 1/2W, Metal Film....... 4835 116 57686 R771 10k, 5%, 1/10W, Metal Film (All Commerc ial & Latam Models).......... 4835 111 37216 R772 100k, 5%, 1/2W, Metal Film...... 4835 116 57687 R773 470 ohm, 5%, 1/10W, Metal Film (All Com mercial & Latam Models)........ 4835 111 37104 R774 1.0k, 5%, 1/8W, Metal Film (Certain Mod els only)............... 4835 111 37022 R775 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 R776 1.0k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57685 S R777 10 ohm, 5%, 1/2W, Metal Film (Certain M odels only).............. 4835 116 67131 R780 1.5k, 5%, 1/2W, Metal Film (All 25" & 2 7" Models & Latam Models w/lcs & AVL). 4835 116 57697 R780 2.2k, 5%, 1/2W, Metal Film (27" w/lcs) 4835 110 47006 R783 1.5k, 5%, 1/10W, Metal Film (LCS w/ AVL & Mono w/o Smart Sound)........ 4835 111 37437 R783 2.2k, 5%, 1/10W, Metal Film (LCS w/o AV L)................... 4835 111 37234 R785 150 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 67222 R788 150 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 67222 R790 75 ohm, 5%, 1/2W, Metal Film (Certain M odels only).............. 4835 116 57739 R791 100 ohm, 5%, 1/2W, Metal Film (Certain Models only)............. 4835 116 57684 R792 3.3k, 5%, 1/2W, Metal Oxide (Certain Mo dels only).............. 4835 116 57633 R793 1.5k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57697 R794 10k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57686 R794 47k, 5%, 1/2W, Metal Film (Certain Mode ls only)............... 4835 116 57725 R795 3.3k, 5%, 1/2W, Metal Oxide (Certain Mo dels only).............. 4835 116 57633 R796 1.5k, 5%, 1/2W, Metal Film (Certain Mod els only)............... 4835 116 57697 S = Safety Part Be sure to use exact replacement part.