Caseta Wireless 3-Way/Single-Pole RF Dimmer For Led, Elv, MLV, or Halogen Lights In White

3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 PD5NEW Lutron Catalog Number Manufacturer Description Weight per unit Product Category Features actuator Rocker switch amperage rating.5 A fan connection Wire Leads Contact Configuration N-O Contact Rating.5 A Material Plastic/Metal Poles :3 Voltage Rating 0 Wattage 500 Dimensions and Weight Size Descriptions Description Long Description Product Type special features Manufacturer Information Brand Manufacturers Part Number sub brand PD5NEWH Lutron Caseta Wireless 3-Way/Single-Pole RF For Led, Elv, MLV, or Halogen Lights In White 0.500 (lbs/each) Wiring Devices & Data/Telecom 4.69 in (9 mm) x.94 in (75 mm) LOW VOLTAGE ELECTRONIC DIMMER Caseta Wireless 3-way/single-pole RF dimmer for LED, ELV, MLV, or Halogen lights in white Caseta Phase Selectable In White The Caseta Wireless phase-selectable dimmer controls various loads directly or automatically through wireless sensors and wireless remote controls, providing a system that delivers energy savings, convenience, and ease of installation. Uses Lutron patented Clear Connect RF Technology, enabling wireless communication with Radio PowrSavr sensors and Pico remote controls for total load control Lutron PD-5NE-WH Diva Taxonomies, Classifications, and Categories Category Description Residential dimmers, motion sensors, controls, & photo cells Type Wireless in-wall dimmer, multi-location/single-pole

3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Packaging Carton Weight Per each 0.5 Uses, Certifications, and Standards Application LIGHTING CONTROL Enclosure Plastic environmental conditions 0% to 90% humidity, non-condensing. Indoor use only. Frequency Rating 50-60 Mounting WALLBOX Operating Temperature 0 to 40 degrees Celsius standard UL, CUL, FCC, NOM, ICC, IFTEL

CasétaR Wireless The CasétaR Wireless family of s and Switches can be controlled directly and remotely when paired with PicoR Remote Controls providing a system that delivers convenience and ease of installation. CasétaR Wireless s and Switches use LutronR patented Clear ConnectR RF Technology which enables wireless communication with PicoR Remote Controls and the LutronR Smart Bridge and Smart Bridge PRO. CasétaR Wireless Switches CasétaR Wireless s 369987b 0.30.8 Features Works with PicoR Remote Control Works with the LutronR App (via a Smart Bridge or Smart Bridge PRO) LutronR patented Clear ConnectR RF Technology works through walls and floors Includes Front Accessible Service Switch (FASST) for safe lamp replacement Works with LutronR Radio Powr SavrT Occupancy and Vacancy Sensors in standalone applications (sensors do not work with Smart Bridge or Smart Bridge PRO) CasétaR Wireless ELV+ CasétaR Wireless Plug-In Lamp Note: Certain models or load types will require a neutral connection. (see Types and Capacity sections) The Lutron App is required for setup and usage with the Smart Bridge and Smart Bridge PRO. The LutronR App is compatible with iosr devices version 8.0 or later and AndroidT devices 4.0 or later. ios is a registered trademark of Cisco in the U.S. and other countries and is used under license. Android is a trademark of Google Inc.

Specifications Regulatory Approvals culus Listed NOM Certified FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 5 of the FCC Rules Industry Canada Certified IFTEL Certified NEMA 40 (-5ANS, -6ANS, -5WS, -0NXD, -5NE) Power Operating voltage: 50/60 Hz: -3PCL, -6WCL, -0NXD, -6ANS, -5ANS, -5NE 0 / 77 V~ 50 / 60 Hz: -5WS-DV Key Design Features Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6000-4-. Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C6.4-99 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. controls always operate locally and do not require system control. Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored. PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-0NXD use conventional 3-way wiring. Uses LutronR ClaroR Wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. LutronR ClaroR Wallplates snap on with no visible means of attachment. Requires a -gang U.S. wallbox. 3 in (89 mm) depth recommended, 4 in (57 mm) depth minimum. status LED(s) to indicate load status. 369987b 0.30.8 System Communications and Capacity CasétaR Wireless Switches and s communicate with PicoR remote controls and the LutronR Smart Bridge/Smart Bridge PRO through Radio Frequency (RF). The CasétaR Wireless Switches and s communicate with LutronR Radio Powr SavrT Occupancy and Vacancy Sensors in a standalone application. Sensors do not work with Smart Bridge or Smart Bridge PRO. The CasétaR Wireless Switches and s must be located within 60 ft (8 m) line of sight or 30 ft (9 m) through walls, of PicoR remote controls and LutronR Smart Bridge devices. Device limits PicoR Remote Controls and Radio Powr SavrT Occupancy Sensors: up to 0 devices (total) may be paired to each CasétaR Wireless In Wall Switch/ (with no Smart Bridge installed). Smart Bridge or Smart Bridge PRO system: up to 50 total wireless devices (CasétaR Wireless s/ Switches, PicoR Remote Controls, and Shades) are supported per system. Smart Bridge or Smart Bridge PRO counts as one device. Environment Ambient operating temperature: 3 F to 04 F (0 C to 40 C), 0% to 90% humidity, non-condensing. Indoor use only. PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-0NXD can be used with mechanical switch in 3-way applications.

Features 369987b 3 0.30.8 PRO PD-0NXD Plug-In PD-3PCL PD-6WCL ELV+ PD-5NE -wire Switch PD-5WS-DV Simple two-wire installation (no neutral wire required) Capable of dimming loads Favorite button (user defined one touch light level) Works with Hi-lumeR % -Wire LED Drivers (Forward-phase only) Works with Power Interfaces (PHPM and GRX TVI) Works with Power Interfaces (PHPM-SW) No wiring required Switch PD-5ANS, PD-6ANS In some low-wattage applications the PD-0NXD will require a neutral wire connection.

Type and Capacity - Switches 369987b 4 0.30.8 Model Number Description Voltage Type Minimum PD-5WS-DV PD-5ANS PD-6ANS Two-wire switch -wire switch (neutral connection required) -wire switch (neutral connection required) Maximum 3 Not Ganged End of Gang Middle of Gang Incandescent / Halogen 5 W 600 W 450 W 350 W 77 V~ Incandescent / Halogen 5 W 350 W 00 W 800 W MLV 5 W 600 VA /475 W 450 VA / 350 W 350 VA / 75 W 77 V~ MLV 5 W 350 VA /075 W 00 VA / 875 W 800 VA / 65 W General Purpose Fan 0.4 A 3 A 3 A 3 A 0 / 77 V~ LED Use LUT-MLC 5 A 4 A 3 A 0 / 77 V~ Fluorescent Use LUT-MLC 5 A 4 A 3 A ELV Use LUT-MLC 600 W 450 W 350 W 77 V~ ELV Use LUT-MLC 350 W 00 W 800 W Incandescent / Halogen 0 W 600 W 600 W 600 W MLV 0 W 600 VA 600 VA 600 VA Fan 0. A 3 A 3 A 3 A LED bulb 5 A 5 A 5 A Fluorescent ballast 5 A 5 A 5 A ELV 0 W 600 W 600 W 600 W PHPM-SW interface interfaces interfaces interfaces Incandescent / Halogen 0 W 70 W 70 W 600 W MLV 0 W 70 VA 70 VA 600 VA Fan 0. A 3.6 A 3.6 A 3.6 A LED bulb 6 A 6 A 5 A Fluorescent ballast 6 A 6 A 5 A ELV 0 W 70 W 70 W 600 W PHPM-SW interface 3 interfaces 3 interfaces 3 interfaces No neutral wire required. To ensure proper operation of the switch with LED, fluorescent, and ELV loads, a LUT-MLC may be required, especially at lower wattages. If the status LED on the switch is flashing or solid red in color, a LUT-MLC must be installed. To guarantee best performance, installing a LUT-MLC with these load types regardless of wattage is recommended. Rarely, some load types may still flicker or glow in the off state even with the LUT-MLC installed, in which case a different load may be required or more than one LUT-MLC is required. 3 See Ganging and Derating section.

Type and Capacity - s Model Number Description Voltage Type PD-0NXD PD-0NXD-XX-C 8 PD-3PCL, 9 PD-3PCL-WH-C 8 P-PKGP-WH 9,0 P-BDG-PKGP 9, PD-5NE PD-5NE-XX-C 8 PD-6WCL PD-6WCL-XX-C 8 P-PKGW-WH 9, P-BDG-PKGW 9,3 P-BDG-PKGW 9,4 P-BDGPRO-PKGW 9,5 Wireless PRO (neutral connection required for certain load types) 4 Wireless Plug-In Lamp Phase Selectable (neutral connection required) Wireless Incandescent / Halogen Minimum 0 W with neutral (5 W without neutral) 369987b 5 0.30.8 Maximum Not Ganged End of Gang Middle of Gang 000 W 800 W 600 W MLV Halogen 0 W 000 VA 800 VA 600 VA MLV LED See Application Note #559 CFL/LED ( Rated) 3 bulb 3 50 W 50 W 50 W Hi-lumeR % -Wire LED drivers driver 000 W (3 drivers) 800 W (3 drivers) 600 W (3 drivers) Dimmable Ballasts 5 ballast 000 VA 800 VA 600 VA PHPM-PA/3F and GRX-TVI 4 interface 3 interface 3 interface 3 interface Incandescent / Halogen 0 W 300 W N/A N/A CFL/LED ( Rated) 3 bulb 3 00 W N/A N/A Incandescent / Halogen 0 W 500 W 400 W 300 W CFL/LED ( Rated) 3, 6, 7 bulb 3 50 W 50 W 50 W MLV Halogen, 6, 7 0 W 400 VA 400 VA 400 VA ELV Halogen 0 W 500 W 400 W 300 W Hi-lumeR % -Wire LED drivers 6, 7 driver 400 W 400 W 400 W (0 drivers) (0 drivers) (0 drivers) Dimmable Ballasts 5, 6, 7 ballast 400 VA 400 VA 400 VA PHPM-PA/3F and GRX-TVI 6, 7 interface 3 interfaces 3 interfaces 3 interfaces ELV LED See Application Note #559 MLV LED See Application Note #559 Incandescent / Halogen 5 W 600 W 500 W 400 W CFL/LED ( Rated) 3 bulb 3 50 W 50 W 50 W Cannot be ganged. Need to change load type to MLV. See www.casetawireless.com/change_phase 3 See bulb list at www.lutron.com/led 4 For PD-0NXD, a neutral connection is required for MLV loads, LED drivers, dimmable ballasts, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI). 5 Compatible dimmable ballasts include Tu-WireR, Mark X, and PowerSenseR. 6 These loads are best operated using a forward-phase control. Consult www.lutron.com/bulblist to ensure the appropriate phase for bulb models used. 7 SSL7 compliant when in forward-phase. 8 Canadian packaged product. 9 Available in WH only. 0 Kit model number. Kit includes () PD-3PCL-WH, and () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White). Kit model number. Kit includes () L-BDG-WH (Caséta Wireless Smart Bridge with HomeKit technology), () PD-3PCL-WH, () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White) and () L-PED-WH (Single tabletop pedestal in White). Kit model number. Kit includes () PD-6WCL-WH, () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White), and () CW--WH (single-gang faceplate in White). 3 Kit model number. Kit includes () L-BDG-WH (Caséta Wireless Smart Bridge with HomeKit technology), () PD-6WCL-WH, () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White), and () CW--WH (single-gang faceplate in White). 4 Kit model number. Kit includes () L-BDG-WH (Caséta Wireless Smart Bridge with HomeKit technology), () PD-6WCL-WH, () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White), () L-PED-WH (Single tabletop pedestal in White) and () CW--WH (single-gang faceplate in White). 5 PRO Kit model number. Kit includes () L-BDGPRO-WH (Caséta Wireless Smart Bridge PRO with HomeKit technology), () PD-6WCL-WH, () PJ-3BRL-WH-L0R (3-button with raise/lower Pico wireless control in White) and () CW--WH (single-gang faceplate in White).

Ganging and Derating 369987b 6 0.30.8 When ganging with other Switches/s in the same wallbox, derating is required. See Type and Capacity charts. Do not remove outside fins on ends of ganged Switches/s Each Switch/ has inside fins removed Middle of ganged Switches/s have all fins removed Do not remove outside fins on ends of ganged Switches/s Each Switch/ has inside fins removed Middle of ganged Switches/s have all fins removed

FASSTM FASSTM FASSTM FASSTM FASSTM FASSTM CasétaR Wireless Operation Switches ELV+ and s 369987b 7 0.30.8 Status LED Indicates load status; glows softly as night light when load is off Status LEDs Indicates load status; glows softly as night light when load is off On On Brighter Off Favorite (User defines light level. Only available in PD-5NE) Darker Off FASSTM FASSTM FASSTM FASSTM FASSTM FASSTM FASST Front Accessible Service Switch FASST Front Accessible Service Switch FASST Front Accessible Service Switch Important Notice: To service load, remove power by pulling out the FASST as far as possible. To restore power after servicing load, push the FASSTM back in completely. Plug-In Status LED Indicates load status; glows softly as night light when load is off On Brighter Darker Off

Mounting 369987b 8 0.30.8 Switch/ Mounting Screws Adapter Mounting Screws Wallbox Switch/ Wallplate Adapter Wallplate Wallplate Adapter / Wallplate purchased separately

Dimensions Switches and s Front View Side View 369987b 9 0.30.8 4 6 in (9 mm) 5 6 in (75 mm) 5/6 in (8 mm) 8 in (30 mm) Plug-In Front View Side View 3 8 in (79 mm) 3 6 in (56 mm) 3 6 in (30 mm)

Wiring Diagrams - Switches Single Location Installation 369987b 0 0.30.8 PD-5WS-DV Blue PD-5WS-DV 0 / 77 V~ 50/60 Hz LUT-MLC PD-5ANS, PD-6ANS Blue PD-5ANS or PD-6ANS Red 3 50/60 Hz White When using controls without a mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. A LUT-MLC ensures proper function when LED, fluorescent, or ELV loads are used. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. 3 The red wire must be connected to the load and the black wire must be connected to. The switch will not work if the wires are reversed. (continued on next page )

Wiring Diagrams - Switches (cont.) 3-Way Installation (with mechanical switch) Option 369987b 0.30.8 PD-5WS-DV (-side) Location Location Brass Brass Blue Mechanical Switch PD-5WS-DV 0 / 77 V~ 50/60 Hz Jumper wire LUT-MLC PD-5WS-DV (Line-side) Location Location Blue Brass Brass PD-5WS-DV Mechanical Switch 0 / 77 V~ 50/60 Hz Jumper wire LUT-MLC Location of Caséta Wireless Switch and mechanical switch may be reversed. A LUT-MLC ensures proper function when LED, fluorescent, or ELV loads are used. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. (continued on next page )

Wiring Diagrams - Switches (cont.) 3-Way Installation (with mechanical switch) Option (cont.) PD-5ANS, PD-6ANS (-side) Location Location 369987b 0.30.8 Brass Mechanical Switch Brass Blue PD-5ANS or PD-6ANS Red 3 Jumper wire 50/60 Hz White PD-5ANS, PD-6ANS (Line-side) Location Location PD-5ANS or PD-6ANS Blue Red 3 Brass Mechanical Switch Brass 50/60 Hz White Jumper wire Location of Caséta Wireless Switch and mechanical switch may be reversed. A LUT-MLC ensures proper function when LED, fluorescent, or ELV loads are used. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. 3 The red wire must be connected to the load and the black wire must be connected to. The switch will not work if the wires are reversed.

Wiring Diagrams - Switches (cont.) 3-Way Installation (with PicoR remote controls) Option : PJ-B-xx and wallbox mounting adapters (PICO-WBX-ADAPT) 369987b 3 0.30.8 PD-5WS-DV Location Location Pico Remote Control and Wallbox Mounting Adapter 3 Travelers PD-5WS-DV Blue 0 / 77 V~ 50/60 Hz LUT-MLC PD-5ANS, PD-6ANS Location Location Pico Remote Control and Wallbox Mounting Adapter 3 Travelers PD-5ANS or PD-6ANS Blue Red 4 50/60 Hz White When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. A LUT-MLC ensures proper function when LED, fluorescent, or ELV loads are used. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. 3 The mechanical switch will need to be removed so the PicoR Remote Control can be installed. 4 The red wire must be connected to the load and the black wire must be connected to. The switch will not work if the wires are reversed. (continued on next page )

Wiring Diagrams - Switches (cont.) Multi-location Installation (3 or more switches control the load) With Pico remote controls (PJ-B-xx) and wallbox mounting adapters (PICO-WBX-ADAPT) 369987b 4 0.30.8 PD-5WS-DV Location Location Location 3 Pico Remote Control and Wallbox Mounting Adapter 3 Travelers Pico Remote Control and Wallbox Mounting Adapter 3 Travelers PD-5WS-DV Blue 0 / 77 V~ 50/60 Hz LUT-MLC PD-5ANS, PD-6ANS Location Location Location 3 Pico Remote Control and Wallbox Mounting Adapter 3 Travelers Pico Remote Control and Wallbox Mounting Adapter 3 Travelers PD-5ANS or PD-6ANS Blue Red 4 50/60 Hz White When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. A LUT-MLC ensures proper function when LED, fluorescent, or ELV loads are used. Install the LUT-MLC inside a load fixture or in a separate junction box within the circuit. 3 The mechanical switch will need to be removed so the PicoR Remote Control can be installed. 4 The red wire must be connected to the load and the black wire must be connected to. The switch will not work if the wires are reversed.

Wiring Diagrams - s Single Location Installation PD-0NXD or PD-5NE Blue, 5 369987b 5 0.30.8 Line / Hot Red 50 / 60 Hz White 3,4 PD-6WCL Line / Hot 50 / 60 Hz When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. Location of CasétaR Wireless PRO and mechanical switch may be reversed. 3 For PD-0NXD only, neutral connection optional except for MLV loads, LED drivers, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI). 4 For PD-5NE, neutral is required. 5 Blue wire is only present on the PD-0NXD model.

Wiring Diagrams - s (cont.) Multi-Location Installation With PicoR remote controls (PJ-XX-XX) and wallbox mounting adapters (PICO-WBX-ADAPT) PD-0NXD and PD-5NE 369987b 6 0.30.8 Location Location Location 3 Line / Hot 50 / 60 Hz PicoR remote control & wallbox mounting adapter Travelers PicoR remote control & wallbox mounting adapter Travelers White 3,4 Blue, 5 Red PD-6WCL Line / Hot 50 / 60 Hz PicoR remote control & wallbox mounting adapter Travelers PicoR remote control & wallbox mounting adapter Travelers When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. Location of CasétaR Wireless PRO and mechanical switch may be reversed. 3 For PD-0NXD only, neutral connection optional except for MLV loads, LED drivers, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI). 4 For PD-5NE, neutral is required. 5 Blue wire is only present on the PD-0NXD model.

Wiring Diagrams - s (cont.) 3-Way Installation With mechanical switch PD-0NXD Location Location 369987b 7 0.30.8 Brass Mechanical Switch Brass Jumper wire (included) White 3 Blue Red 50/60 Hz Installation with PHPM - required 4 PD-0NXD and PD-5NE Location Red PHPM 60 Hz White Control Zone In DH N L/H Blue, 5 When using controls without mechanical 3-way switch, cap the blue terminal. Do not connect the blue wire to any other wiring or to ground. Location of and mechanical switch may be reversed. 3 connection optional except for MLV loads, LED drivers, and power modules (PHPM-PA, PHPM-3F, and GRX-TVI). 4 See LutronR P/Ns 369356 and 369355 for additional wiring diagrams. 5 Blue wire is only present on the PD-0NXD model.

Wiring Diagrams - s (cont.) Installation with GRX-TVI - required 369987b 8 0.30.8 PD-0NXD and PD-5NE Location GRX-TVI Red L/H 00-77 V~ 60 Hz White Blue Installation with Hi-lumeR % -wire LED Drivers - required PD-0NXD and PD-5NE Red Red White Blue White Hi-lumeR % -wire LED Driver with White Stripes LED Light Engine Note: For more information on Hi-lumeR % -wire LED Drivers, see www.lutron.com See LutronR P/N 36947 for additional wiring diagrams. Blue wire is only present on the PD-0NXD model.

Colors and Finishes Gloss Finishes 369987b 9 0.30.8 White WH BL Ivory IV Light Almond LA Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors. PowerSense is a registered trademark of Osram Sylvania.