3M Mining and Mineral Extraction. Electrical. 3M Electrical Solutions for. Mining

3M Mining and Mineral Extraction Electrical 3M Electrical Solutions for Mining 3

Table of Contents Electrical Tapes... 4 Cold Shrink Indoor and Outdoor QT III Terminations... 6 Sheath Seal Kits... 7 Rejacketing Kit... 7 Cold Shrink Termination QT III 69kV/72,5kV... 8 JobBox TM Custom Kitting... 8 Armoured Cable Splices TS Series... 9 Cold Shrink QS III Splices... 10 Motor Lead Splice Kits... 11 Cold Shrink Mine and Portable Cable Splicing Kits... 12 Scotchcast TM Mine and Portable Cable Splicing Kits... 13 Mining Tape Splice Kits 3100 Series... 14 Scotchcast Flexible Power Cable Splicing Kits 82F Series... 15 Scotchcast Mine and Portable Cable Jacket Repair Kits M Series... 16 Flame Retardant Heat Shrink ITCSF and IMCSF... 17 Corrosion Protection Tapes... 17 Corrosion Protection Kits CPT Series... 18 Cold Shrink End Caps EC Series... 18 Cable Preparation... 19 Portable Labellers... 20 Novec Aerosol Cleaners... 21 Novec Fire Suppression 1230... 21 TTS TM Self Regulating Heating Cable... 22 Aluminum Conductor Composite Reinforced (ACCR)... 23 Flexible Paper and Laminate Insulation... 23 SUBSTATION l 10 l 7 l 1 l 8 l 11 MAINTENANCE/WAREHOUSE l 9 l 7 l 1 l 2 l 3 l 4 Motor Lead Kits 5300 Series Cold Shrink Cable Splicing Kits 8040/2230 Series Scotchcast TM Cable Splicing Kits 8096 Series TS Series Splicing Kits

Keep the Power Flowing with 3M Electrical Solutions You work in a demanding environment. To be successful, you need a supplier with a solid understanding of your industry and the technology that drives it. Quite simply, you need 3M. Our 3M Electrical Markets Division is dedicated to helping you get the job done better, faster and safer at the mine, mill, smelter or refinery. Our broad portfolio of solutions, backed by comprehensive technical support, is available to you from coast to coast to coast. TRANSFORMER SMELTING/REFINING l 1 l 8 l 11 l 10 l 7 l 4 l 10 l 7 l 2 MOBILE SUBSTATION l 6 l 3 l 5 MOBILE EQUIPMENT l 7 l 8 l 5 l 6 l 7 l 8 l 9 l 10 l 11 Scotchast TM Jacket Repair Kits M Series Heavy Duty Mining Tape & Splice Kits Scotchlok TM Terminals and Connectors Portable Labellers Cold Shrink Cold Shrink Outdoor Terminations Indoor Terminations QT-III QT-III Novec TM Aerosol Cleaners

Scotch and Electrical Tapes For some 60 years, 3M has been the world s leading supplier of electrical tapes. The broad 3M line includes vinyl tapes of many kinds, our stretchier and stickier all-weather tape, Scotch Super 33+ Vinyl Electrical Tape, Scotch Color-Coding Tapes 35 and cold-weather Scotch Vinyl Electrical Tape Super 88. Durable 3M Electrical Tapes have excellent resistance to abrasion, moisture, UV rays and many caustic substances. They are compatible with solid dielectric cable insulation. And because they re designed with the electrician in mind, they re easy to apply properly in a wide range of temperatures, indoors and out. Ordering Information Product Name Product Description Tape Thickness Temp Range Roll Size Scotch Super 33+ Premium Vinyl Electrical Tape Highly conformable in all weather applications; resists UV rays, abrasion, corrosion, alkalies & acids. Flame retardant UL listed. CSA certified 7 mil -18 C / 105 C 3/4 x 66 (19 mm x 20,1 m) 3/4 x 44 (19 mm x 13,4 m) 3/4 x 20 (19 mm x 6,0 m) Scotch Premium Vinyl Electrical Tape Super 88 All weather, heavy duty, abrasion resistant, fast build up; flame retardant UL listed, CSA certified. 8.5 mil -18 C / 105 C 3/4'' x 66' (19 mm x 20,1 m) 3/4'' x 44' (19 mm x 13,4 m) Scotch Premium Vinyl Electrical Tape Color Coding Tape 35 9 fade-resistant colors, excellent insulating properties. Resists UV rays, abrasion, corrosion, alkalies & acid. 7 mil 0 C / 105 C 3/4'' x 60' (19 mm x 18,2 m) 1/2'' x 20' (12 mm x 6,1 m) 3M Temflex Vinyl Electrical Tape Economical, general purpose tape UL listed. CSA certified. 7 mil -10 C / 80 C 3/4" x 60' (19 mm x 18,2 m) 3M Temflex Vinyl Electrical Tape 1700P General purpose tape UL listed.csa certified. Printed for use in MSHA - approved Splicing Kits 7 mil -10 C / 80 C 3/4" x 66' (19 mm x 20,1 m) 1 1/2" x 44' (38 mm x 13,4 m) 1 1/2" x 66' (38 mm x 20,1 m) Scotch Semi-conducting Electrical Tape 13 Rubber tape, semi-conductive. Compatible with cable semi-conducting jackets. 30 mil continuous: 90 C /194 F short term: 130 C / 266 F 3/4" x 15' (19 mm x 4,5 m) 1 1/2 x 66' (38 mm x 20,1 m) Scotch Shielding Electrical Tape 24 All metal open-weave shielding braid, conformable, temperature stable. 1" x 15' (25 mm x 4,5 m) 1" x 100' (25 mm x 30,4 m) Scotch Electrical Grounding Braid 25 All-metal woven braid; high current-carrying capacity of 6 AWG wire; solderable. 1/2" x 15' (12 mm x 4,57 m) Scotch Glass Cloth Electrical Tape 27 and 69 Woven insulating glass cloth; high-temperature resistance; high mechanical strength. 27 is 7 mil 69 is 7.5 mil 27 is Class B temp (130 C / 266 F) 69 is class H temp (180 C / 356 F) 1/2" x 66' (12 mm x 20,1 m) 3/4" x 66' (19 mm x 20,1 m) Scotch Linerless Rubber Splicing Tape 130C High voltage insulating; thermally conductive; self-bonding. 30 mil continuous: 90 C / 194 F short-term: 130 C / 266 F 1" x 30' (25 mm x 9,1 m) 3/4" x 30' (19 mm x 9,1 m) 1 1/2" x 30' (38 mm x 9,1 m) 2" x 30' (50 mm x 9,1 m) 4

Electrical Solutions Ordering Information Product Name Product Description Tape Thickness Temp Range Roll Size 3M Temflex Rubber Splicing Tape 2155 Economical linered low voltage rubber insulating tape; self-fusing, UL rated. 30 mil 80 C 176 F 3/4" x 22' (19 mm x 6,7 m) 1 1/2" x 22' (38 mm x 6,7 m) Scotch Rubber Mastic Tape 2228 Self fusing rubber backing bonded to a moisture-sealing mastic; all weather. 65 mil 90 C / 194 F emergency overload of 130 C / 266 F 2" x 3' (50 mm x 0,9 m) 1"x10 (25 mm x 3,0 m) 3M Scotch-Seal Mastic Tape Compound 2229 Conformable and durable mastic. Excellent moisture & environmental seal. 125 mil 80 C 176 F 3 3/4" x 10' (95 mm x 3,0 m) 3M Scotchfil Electrical Insulation Putty Black, self-fusing, insulating putty. 125 mil 80 C 176 F 1 1/2" x 60" (38 mm x 1,52 m) 3M Temflex Cotton Friction Tape 1755 High-grade friction tape. Good abrasion resistance. 15 mil 80 C 176 F 3/4" x 60' (19 mm x 18,28 m) Scotch Vinyl Mastic 2200 and 2210/Scotch Moisture Sealant 06147 and 06149 Excellent moisture sealant; tough vinyl backing; all weather. 2200 is 125 mil 2210 is 90 mil 6147 is 45 mil 6149 is 45 mil 80 C 176 F 6 1/2" x 4 1/2" (165 mm x 144 m) 3 1/4" x 4 1/2" (82 mm x 144 m) 4" x 10' (101 mm x 3,04 m) 2 1/2" x 10' (63 mm x 3,04 m) 2 1/2" x 2 1/2" (63 mm x 63 m) Scotch Self-Fusing Silicone Rubber Electrical Tape 70 Arc & track resistant; self-fusing, long lasting silicone rubber. 12 mil 180 C 356 F 1" x 30' (25 mm x 9,14 m) Scotch Heavy Duty Triangular Self-fusing Silicone Rubber Electrical Tape 70HDT Arc & track resistant; self-fusing, long lasting silicone rubber, triangular tapered edge profile and a blue guideline. 20 mil center, 8 mil edge 180 C 356 F 1" x 30' (25 mm x 9,14 m) Scotch Fire and Electric Arc Proof Tape 77W Used on high-energy cables that are within 18" (close proximity) of other cables or valuable assets. Easily visible, easy inspection. 30 mil 1-1/2" x 20' (38 mm x 6,1 m) 3" x 20' (76 mm x 6,1 m) Scotch Varnished Cambric Tape 2510 and 2520 Yellow, varnish coated cotton cloth 2510: no adhesive; 2520: adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections. 2510 is 7 mil 2520 is 8 mil 105 C 220 F 3/4" x 60' (19 mm x 18,3 m) 3/4" x 36 yd (19 mm x 33 m) 1" x 36 yd (25 mm x 33 m) 1-1/2" x 36 yd (38 mm x 33 m) 2" x 36 yd (51 mm x 33 m) 36" x 25 yd (914,4 mm x 22,9 m) 2510 only Scotch Heavy Duty Mining Tape 31 Tough, abrasion-resistant backed and flexible tape for jacket repair on mining cables. MSHA-approved. 60 mil 105 C 221 F 2" x 6' (51 mm x 1,8 m) 2" x 8,5' (51 mm x 2,6 m) 2" x 10' (51 mm x 3,05 m) Scotch Barricade Tape 300 Series Durable polyethylene plastic, bold 2" letters, long roll lenght, will not tear easily, attracts attention. Barricade applicable in both large and small areas. Available in various sizes, thicknesses and with different warning messages. 2 mil 3 mil 4 mil N/A 3" x 300' (76 mm x 91,4 m) 3" x 1000' (76 mm x 304,8 m) Scotch Detectable Bured Barricade Tapes 400 Series Designed for accurately locating and helping prevent damage to underground utility installations. Aluminum backing. 5 mil N/A 3" x 1000' (76 mm x 304,8 m) 6" x 1000' (152 mm x 304,8 m) 5

HEAT Cold Shrink Indoor & Outdoor Terminations QT-III Cold Shrink Terminations QT-III offer easy installation and reliable performance when terminating indoor and outdoor medium voltage shielded cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. The QT-III termination provides long-term reliability through an improved silicone rubber body with enhanced hydrophobic recovery, UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, Cold Shrink Terminations QT-III deliver maximum performance. AGENCIES Meets requirements of IEEE Standard 48-1996. 3M Product Number BIL Cable Insulation O.D. Range 3M Cold Shrink Indoor Tubular Termination QT-III 3M Cold Shrink Outdoor Termination QT-III Conductor Size Range AWG and kcmil (mm 2 ) in. (mm) 5 kv 8.7 kv 15 kv 25/28 kv 35 kv 7620-T-95 95 kv 0.32-0.59 (8,2-15,0) 8-4 8-6 7621-T-95 95 kv 0.44-0.89 (11,2-22,7) 2-3/0 4-2/0 7622-T-95 95 kv 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 7624-T-95 95 kv 0.83-1.53 (21,1-38,9) 500-750 350-700 7625-T-95 95 kv 1.05-1.80 (26,7-45,7) 700-1500 600-1250 7622-T-110 110 kv 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120) 7624-T-110 110 kv 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240) 7625-T-110 110 kv 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 7626-T-110 110 kv 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (500-1000) 7693-T-150 150 kv 0.72-1.29 (18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120) 2-2/0 (35-70) 7695-T-150 150 kv 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (150-400) 3/0-600 (95-325) 7696-T-150 150 kv 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (500-1000) 900-1750 (500-800) 700-1500 (400-725) 3M Cold Shrink Outdoor Skirted Termination QT-III 7620-S-2 95 kv 0.32-0.59 (8,2-15,0) 8-4 8-6 7621-S-2 95 kv 0.44-0.89 (11,2-22,7) 2-3/0 4-2/0 7622-S-2 110 kv 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120) 7692-S-4 150 kv 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120) 2-1/0 (35-50) 7693-S-4 150 kv 0.72-1.29 18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120) 7694-S-4 150 kv 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240) 2/0-250 (70-150) 7695-S-4 150 kv 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (125-400) 7696-S-4 150 kv 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (625-1000) 900-1750 (500-800) 7683-S-8 200 kv 0.72-1.29 18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120) 2-2/0 (35-70) 7684-S-8 200 kv 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240) 2/0-250 (70-150) 2-4/0 (35-120) 7685-S-8 200 kv 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (125-400) 3/0-600 (95-325) 7686-S-8 200 kv 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (625-1000) 900-1750 (500-800) 700-1500 (400-725) * Each kit makes 3 terminations; lugs must be purchased separately. 6

Electrical Solutions Sheath Seal Kits 5831 and 5832 Sheath Seal Kits 5831 and 5832 are designed to seal the sheath area for multiconductor cables with or without ground wires. They will handle copper or aluminum cables from #2 AWG through 500 kcmil (35-250 mm 2 ). For kit contents and sizing, see chart below. Each kit makes one seal. 3M Sheath Seal Kit Specifications 5831 5832 Conductor Size 2-3/0 AWG (35-80 mm 2 ) 4/0 AWG - 500 kcmil (120-250 mm 2 ) Maximum Jacket or Armour O.D. 2.6" (66 mm) 3.75" (95,2 mm) Kit Components: Wraparound Mold Body 1 1 3M Scotchcast 2131 1 1 Abrasive Cloth 1 1 3M Scotch Electrical Tape Super 33+ 1 1 3M Scotch Linerless Rubber Splicing Tape 130C 1 1 3M Scotchfil Electrical Insulation Putty 1 1 3/C Rejacketing Kits Designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with Cold Shrink Breakout Boots and Silicone Rubber Terminations. RJK Kits for Converting 3/C Cable to Three 1/C Cables Indoor/ Outdoor Kits Indoor Kits Cable Metallic Shield Diameter Range 5 kv 8 kv 15 kv 25/28 kv RJK-1 RJS-2/3 0.60-0.80 1-3/0 2-2/0 1-2/0 RJK-2 RJS-3/3 0.80-1.02 4/0-400 3/0-30 1/0-4/0 2-1/0 RJK-3 RJS-4/3 1.02-1.28 500-750 400-600 250-450 2/0-250 RJK-4 RJS-5/3 1.28-1.62 800-1000 750-1000 500-750 300-500 7

HEAT Cold Shrink Termination QT-III 69kV/72,5kV Cold Shrink Terminations 7672-S-8 Series QT-III are designed for use on 69kV or 72,5kV polymetric power cable. Because they are cold shrink, installers do not need to use a torch, and they are easy to install. The silicone insulator also makes them light weight, so there is no need for a crane. Each kit includes instructions for Jacketed Concentric Neutral (JCN), Tape Shield (TS), Longitudinally Corrugated (LC), Tape over Wire (TOW) and Wire over Tape (WOT) cable constructions. The kits are packaged 1 termination per kit. Lugs must be purchased separately. AGENCIES IEEE 48 Class 1 for 69kV IEC 60859 for 72,5 kv 3M Cold Shrink Outdoor Termination QT-III 69kV/72,5kV Kit Number BIL Cable Insulation O.D. Range Conductor Size Range AWG and kcmil (mm 2 ) 3M Cold Shrink Termination QT-III 69kV/72,5kV inches (mm) Tape Shield (TS) 7672-S-8 0.650 (16.5) 1.94-3.08 (49.3-78.2) 250-1750 (120-850) Jacketed Concentric Neutral (JCN) or Wire Shield Longitudinally Corrugated (LC/HSG) ** Tape over Wire or Wire over Tape (TOW) or (WOT) 250-1750 (120-850) 250-1750 (120-850) 250-1000 (120-500) 76720S-8 (RW) 0.400-0.470 (10.2-11.9) 1.44-2.58 (36.6-65.5) 250-1750 (120-850) 250-2000 (120-1000) 250-1750 (120-850) 250-1000 (120-500) * For standard (non-reduced wall) terminations: Can be used with Jacketed Concentric Neutral (JCN) Cables Cables having a Jacket OD to 3.61" (91.7 mm) maximum. ** For Corrugated Armor Cables, please contact 3M Representative for sizing information. The final determining factors governing selection are Primary Insulation O.D. and Jacket O.D. JobBox TM Custom Kits 3M Termination Kit Contents 3M puts it all in the box for you exactly as spec d. No more mismatched materials. No more poking through a fistful of small pieces. No more back and forth trips looking for missing parts. Just open the box and you re ready to go start to finish. 3M JobBox solutions are offered for Motor Lead Splices, Industrial Splices, Terminations, Heat Tracing and other custom application. ONE JOB. ONE BOX. 8

HEAT Electrical Solutions ORDERING INFORMATION Size AWG kcmli Armoured Cable Splices Splices for 1C, 3C, & 4C, Armored or Non-Armoured Cable TS Series These 3M Low Voltage Tape Splicing Kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The TS series accommodates a full range of cable sizes. 1C Splice Kit 3C Splice Kit 4C Splice Kit 14-250 TS TS TS 300 TS TS1 TS1 350 TS TS1 TS1 400 TS TS1 TS1 500 TS TS1 TS1 600 TS TS1 TS1 750 TS TS1 TS1 1000 TS TS1 TS1 3M Terminations and Splice Kits Kit Number Voltage Conductor Size Range AWG and kcmil (mm 2 ) 3M Cold Shrink TS-Kits Kit Number Voltage Conductor Size Range AWG and kcmil (mm 2 ) 1/C & 3C, 15/25/28 kv Shielded Armoured & Non-Armored Armorcast/Cold Shrink Splices Designed for splicing shielded (Tape or Wire Shielded and Unishield ) armoured or non-armored cables 5/8/15/25/28 kv. The completed splices are designed for use in cable tray, as well as weather-exposed and direct burial locations. The TS Series splices use Armorcast and Cold Shrink technology. Connectors not included, order separately. Each kit makes one splice. Splices meet the requirements of IEEE 404. TS-5kVU-1C-8-4 5kVU 8-4 TS-5kVU-3C-8-4 ** 5kVU 8-4 TS-5kVU-1C-3-300 5kVU 3-300 TS-5kVU-3C-3-300 ** 5kVU 3-300 TS-5kVU-1C-350-1000 5kVU 350-1000 TS-5kVU-3C-350-1000 ** 5kVU 350-1000 TS-5kV-1C-6-3/0 5kV 6-3/0 TS-5kV-1C-6-3/0 5kV 6-3/0 TS-5kV-3C-2-3/0 5kVU 2-3/0 TS-5kV-1C-4/0-400 5kV 4/0-400 TS-5kV-3C-4/0-500 5kVU 4/0-500 TS-5kV-1C-500-1000 5kV 500-1000 TS-5kV-3C-4/0-500 5kVU 4/0-500 TS-5kV-1C-500-1000 5kV 500-1000 TS-5kV-3C-500-750 5kVU 500-750 TS-5kV-1C-500-1000 5kV 500-1000 TS-15kV-1C-2-4/0 15kV 2-4/0 TS-15kV-3C-2-4/0 15kV 2-4/0 TS-15kV-1C-4/0-500 15kV 4/0-500 TS-15kV-3C-4/0-500 15kV 4/0-500 TS-15kV-1C-500-1000 15kV 500-1000 TS-15kV-3C-350-750 15kV 350-750 TS-15kV-1C-500-1000 15kV 500-1000 TS-25kV-1C-1-250 25kV 1-250 TS-25kV-3C-1-250 25kV 1-250 TS-25kV-1C-250-750 25kV 250-750 TS-25kV-3C-250-750 25kV 250-750 TS-25kV-1C-500-1000 25kV 500-1000 TS-25kV-3C-500-1000 25kV 500-1000 ** U unshielded cable 9

Cold Shrink Silicone Rubber Splices QS-III 3M Cold Shrink Silicone Rubber Splice QS-III is designed to meet customer demands for easy, safe, reliable installations by virtually eliminating the pushing, pulling or heating required by traditional splices. AGENCIES Meets most worldwide standards including IEEE 404, CENELEC and European VDE. 3M Cold Shrink Splice QS-lll 3M Catalogue Number Primary Insulation O.D. Range 1/C, 15 kv, tape, wire, LC shielded cable, UniShield cable Conductor Size Range 5513A 0.64-1.01" (16,3-25,7 mm) 2-4/0 AWG (35-95 mm 2 ) 5513A 0.84-1.38" (21,3-35,1) 4/0 AWG-500 kcmil (95-240 mm 2 ) 5515A 1.04-1.70" (26,4-43,2) 350-750 kcmil (185-325 mm 2 ) 5516A 1.08-1.70" (27,4-43,2) 500-1000 kcmil (240-500 mm 2 ) 1/C, 25/28 kv, tape, wire, LC shielded cable, UniShield cable 5524A 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm 2 ) 5525A 1.07-1.70" (27,2-43,2 mm) 250-750 kcmil (120-325 mm 2 ) 5526A 1.24-2.07" (31,5-52,6) 500-1000 kcmil (240-500 mm 2 ) 1/C, 35 kv, tape, wire, LC shielded cable, UniShield cable 5535A 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm 2 ) 5536A 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm 2 ) 10

HEAT Motor Lead Splice Kits Pigtail Splicing for 1000 V (or less) & 5-8 kv Shielded and Non-Shielded Feeder Cables Motor Lead Kits contain everything needed to quickly splice, seal and insulate copper lug connections of motor lead and feeder cables in one convenient kit. No special tools, torch or power source is needed. All splices are easily re-enterable for inspections and motor replacement. 3M Pigtail Splicing Each kit contains: Three separately packaged splices with pre-formed, slip-on rubber boots Mastic sealing strips SPLICING KITS 5300 TO 5304 Voltage Rating: Up to 1000 V. Use with one-hole copper lugs ORDERING INFORMATION Kit Number Conductor Range Feeder Motor Lead AWG/kcmil (mm 2 ) AWG/kcmil (mm 2 ) Pigtail 1000 V 5300 14-10 (2,5-4) 16-12 (1,5-2,5 ) 5301 10-4 (6-16) 12-4 (4-16) 5302 2-1/0 (35-60) 4-1/0 (25-50) 5303 1/0-250 (70-120) 2-250 (35-120) 5304 250-500 (150-240) 4/0-500 (120-240) SPLICING KITS 5316 TO 5319 Voltage Rating: Up to 5/8 kv (Non-Shielded) Use with one or two-hole copper lugs ORDERING INFORMATION Kit Number Feeder AWG/kcmil (mm 2 ) Conductor Range Motor Lead AWG/kcmil (mm 2 ) Pigtail 5/8 kv 5316 8-4 (10-16) 10-4 (6-16) 5317 2-1/0 (35-50) 4-1/0 (25-50) 5318 1/0-250 (70-120) 2-250 (35-120) 5319 250-500 (150-240) 4/0-500 (120-240) Electrical Solutions SPLICING KITS 5321 TO 5324 Voltage Rating: Up to 8 kv (Shielded or Non-shielded) Use with one or two-hole copper lugs ORDERING INFORMATION Kit Number Conductor Range Feeder Motor Lead AWG/kcmil (mm 2 ) AWG/kcmil (mm 2 ) Pigtail 5 kv/8 kv 5321 8-4 (10-16) 10-4 (6-16) 5322 2-1/0 (35-50) 4-1/0 (25-50) 5323 1/0-250 (70-120) 2-250 (35-120) 5324 250-500 (150-240) 4/0-500 (120-240) 3M Motor Lead Pigtail or V-Stub Splice 5380 Series for 5 and 8 kv Shielded and Non-Shielded Cables Motor Lead Splicing Kits 5380 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kv shielded and non-shielded feeders. The splice s main component, the lug or splice cover, is made from EPDM rubber as a slip-on insulator. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable s electrical stress control. These kits are designed to be used with copper compression lugs. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok TM Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. 3M MOTOR LEAD PIGTAIL OR V-STUB SPLICE 5380 Voltage Rating: Up to 5/8 kv (Shielded and Non-Shielded) SPECIFICATIONS AND ORDERING INFORMATION Kit Number Conductor Range Feeder AWG/kcmil (mm 2 ) Reusable Motor Boot Mastic Environmental Seal 3M 5380 Pigtail Termination on Shielded Feeder Cable Hi-K Stress Control to Grade Lugs Motor Lead AWG/kcmil (mm 2 ) Pigtail 5/8 kv 5381 8-4 (7.6-13) 10-4 (6-16) 5382 2-1/0 (11-16.5) 4-1/0 (25-50) 5383 1/0-250 (13.5-22.4) 2-250 (35-120) 5384 250-500 (19-28.4) 4/0-500 (120-240) 11

HEAT Cold Shrink Mine and Portable Cable Splicing Kits 3M Splicing Kit 8043-1 FOR 5 AND 8 KV CABLE, TYPES SHD-GC, MP AND MP-GC The 8043-1 Kit can be installed without the use of heat or additional tools, and the cable returned to service immediately. 3M Cold Shrink Tubes, with the removable core, are designed for quick installation. Each kit contains: Cold Shrink jacketing tube Filler tube Three smaller insulator tubes One roll each of Scotch Electrical Tapes 13, 130C, 24 Temflex TM Electrical Tape Two abrasive cloths (fine and coarse); Scotch Adhesive kit and an illustrated step-by-step instruction sheet Connectors are ordered separately. If regular power connectors are used, length cannot exceed 2 1/2 inches. 3M SPLICING KIT 2237A The kits are designed to splice SO and SJ type portable power cables (commercial grade extension cords) which are typically used in industrial environments. The 2237A kit accommodates 4-conductor 12-10 AWG. The primary application for the kits is splicing damaged portable cable. The kits can be used for cables aboard ships, cargo operations and a variety of industrial applications. Each kit contains: Cold Shrink tube Butt connectors Rubber phase Divider mastic strips Scotch Electrical Color-Coding Tape 35 Instructions 3M Cold Shrink Splicing Kit 8043-1 AGENCIES Meets American Bureau of Shipping 93-DL11873-X. ORDERING INFORMATION Kit Number Cable Type Conductor Range AWG (mm 2 ) Cable O.D. Range Inches (mm) Voltage Rating 8043-1* SHD-GC 4-2 (22-30) 1.80 (2.40) 5-8 kv 8043-1* MP-GC, MP 3/0-4/0 (95-100) 1.80 (2.40) 5 kv 8043-1* MP-GC, MP 1/0-2/0 (60-70) 1.80 (2.40) 8 kv 2237 A** SO, SJ 12-10 (6) 0.62 (0.95) 600 V *Order connectors separately. **Connectors included. 12

HEAT Electrical Solutions Scotchcast TM Mine and Portable Cable Splicing Kits for 5,8 and 15 kv Splicing Kits 8096-2, 8096-4 & 8096-6 The 3M Scotchcast 8096 Series are complete cable splicing kits designed for splicing type SHD-GC three-conductor shielded cables up to 15 kv on draglines, power shovels, drills and type MPF underground power feeder cables and select trailing cables. Each kits contains: Cold Shrink Insulation Tubes 3M Scotchcast Jacketing Compound 2131 Cable cleaning and shielding materials to complete a three-conductor cable splice Using 3M Scotchcast Splicing Kits, you obtain durable, permanent, shop-quality splices without vulcanizing. NON-VULCANIZING Jacket restored by 2131 compound poured from two-part closed mixing pouch for convenient mixing and pouring. Compound is self-curing. PERMANENT Both electrically and mechanically flexible and moisture-resistant. PORTABLE Make repairs in the mine or in the shop. Reduce costly cable and equipment downtime. Cables can be energized immediately. VERSATILE Three different cable splicing kits handle nearly all common cable sizes. NO END-LIFTING Polyurethane-based cable repair compound bonds to all modern cable jacket materialsneoprene and nitrite/pvc, even PVC, EPR and Hypalon. ABRASION-RESISTANT Equal in performance to vulcanizing. AGENCIES Meets Mine Safety and Health Administration requirements for flame retardancy and carries acceptance number 07-KA060007-MSHA. WEATHER RESISTANT Designed to maintain physical and electrical properties in temperature extremes. ORDERING INFORMATION Kit Number Cable Type Conductor Range AWG/kcmil (mm 2 ) Voltage Rating 8096-2 SHD-GC 4-1/0 (22-50) 5 & 8 kv 8096-2 SHD-GC 2 (30-35) 15 kv* 8096-2 MPF-GC & MPF 4-3/0 (22-80) 5 & 8 kv 8096-2 MPF-GC & MPF 2-1/0 (35-50) 15 kv* 8096-4 SHD-GC 4-4/0 (22-100) 5 & 8 kv 8096-4 SHD-GC 2 (30-38) 15 kv* 8096-4 MPF-GC & MPF 4-300 (22-50) 5 & 8 kv 8096-4 MPF-GC & MPF 2-3/0 (35-80) 15 kv* 8096-6 SHD-GC 4/0-500 (100-250) 5 & 8 kv 8096-6 SHD-GC 1/0-500 (60-250) 15 kv* 8096-6 MPF-GC & MPF 250-500 (150-250) 5 & 8 kv 8096-6 MPF-GC & MPF 1/0-500 (60-250) 15 kv* *Note: Additional splicing material may be needed for 15 kv. 3M Scotchcast Splicing Kit 8096-2, 8096-4 & 8096-6 13

Mining Tape Splice Kits 3100 Series Scotch Heavy Duty Mining Tape 31 Scotch Heavy Duty Mining Tape 31 is approved by P-07-KA080005-MSHA (Mining Safety & Health Administration) as the outer jacketing of the 3M Mining Tape Splicing Kits 3100 Series. The tape is printed with the MSHA logo/approval number. Scotch Heavy Duty Mining Tape 31 allows for on-site, quick repair of mining cables. 3M Mining Cable Splice Kit 3100 3M Mining Cable Splice Kit 3103 3M Mining Cable Splice Kit 3104 3M Splice Kit Contents Mining Cable Splice Kit 3100 Size Voltage Rating Cable Range 1 Scotch Heavy Duty Mining Tape 31 2" x 8.5' 600V - 2kV #6-500 kcmil 1 Scotch Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 600V - 2kV #6-500 kcmil 1 3M Temflex Vinyl Electrical Tape 1700P 1-1/2" x 44' 600V - 2kV #6-500 kcmil 1 3M Cable Cleaning Preparation Kit CC-2-Dry 600V - 2kV #6-500 kcmil Mining Cable Splice Kit 3103 2 Scotch Heavy Duty Mining Tape 31 2" x 8.5' 5-15kV #6-500 kcmil 1 3M Temflex Vinyl Electrical Tape 1700P 1-1/2" x 44' 5-15kV #6-500 kcmil 3 3M Scotch Electrical Shielding Tape 24 2" x 10' 5-15kV #6-500 kcmil 2 3M Scotch Rubber Mastic Tape 2228 1" x 10' 5-15kV #6-500 kcmil 2 3M Cable Cleaning Preparation Kit CC-2-Dry 5-15kV #6-500 kcmil 3 3M Scotch Electrical Semi-conductive Tape 13 3/4" x 15' 5-15kV #6-500 kcmil 3 Scotch Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 5-15kV #6-500 kcmil 3 Scotch Linerless Rubber Splicing Tape 130C 3/4" x 30' 5-15kV #6-500 kcmil Mining Cable Splice Kit 3104 1 Scotch Heavy Duty Mining Tape 31 2" x 8.5" 2kV #6-500 kcmil 1 3M Temflex Vinyl Electrical Tape 1700P 1-1/2" x 44' 2kV #6-500 kcmil 2 3M Scotch Electrical Shielding Tape 24 2" x 10' 2kV #6-500 kcmil 1 3M Cable Cleaning Preparation Kit CC-2-Dry 2kV #6-500 kcmil 2 Scotch Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 2kV #6-500 kcmil 14

HEAT Electrical Solutions Scotchcast TM Flexible Power Cable Splicing Kits 82F Series 82-F1 and 82-F2 Inline Splice Kits 3M Scotchcast Cable Splicing Kits 82-F1 and 82-F2 are for in-line splices on nonshielded, portable power cables and cords with copper conductors. They are rated up to 5 kv for single conductors and up to 1 kv or 600/2000 V for multiple conductors. The kits are designed to be used with inline compression (crimp) connectors. The 82-F1 and 82-F2 molds are removable. 3M Scotchcast Inline Splice Kits 82-F1 and 82-F2 Each kit contains: One-piece removable mold Tape for sealing mold ends Abrasive cloth 3M Scotchcast Compound 2131 in closed mixing pouch. Each kit makes one splice. Kit Number Voltage Rating Conductor Range AWG (mm 2 ) Cable O.D. Range Inches (mm) Number of Conductors Connection Maximum O.D. Inches (mm) 82-F1 5 kv 6-1/0 (16-50)** 0.25-0.80 (6-20) 1 0.62 connector (18) connector 1 kv (600/2000 V)* 0.25-0.80 (6-20) Multi 0.90 connector bundle (23) connector bundle 82-F2 5 kv 2/0 /0 (70-95)** 0.80-1.20 (20-30) 1 0.82 connector (21) connector 1 kv (600/2000 V)* * Mine portable cable rating. **Base selection on cable O.D. range. 0.80-1.20 (20-30) Multi 1.30 connector bundle (33) connector bundle Flexible Power Cable Tap Splice Kit 82-BF1 3M Scotchcast Splice Kit 82-BF1 is for tap splices on non-shielded portable power cables and cords with copper conductors rated up to 1 kv. It can be used on singleconductor or multiple-conductor cables using a compression (crimp) C tap connector. Each kit contains: One-piece removable mold Tape for sealing mold ends Abrasive cloth 3M Scotchcast Compound 2131 in closed mixing pouch Each kit makes one splice. 3M Scotchcast Inline Splice Kit 82-BF1 AGENCIES 82-F and 82-BF splices are recognised by the Mine Safety and Health Administration 07-KA060002-MSHA. Kit Number Voltage Rating Conductor Range 82-BF1 1 kv Up to 1/0 AWG (50 mm 2 )* * Base selection on cable O.D. range: 0.25-0.80'' Cable O.D. Range Inches (mm) Number of Conductors 0.25-0.80 (6-20) 1 or Multi 15

Scotchcast TM Mine and Portable Cable Jacket Repair Kits M Series Jacket Repair Kits M-20, M-30, & M-40 3M Scotchcast M-series kits are designed to make permanent, shop-quality low- and high-voltage cable jacket repair and splices without vulcanizing. The M-series also features a versatile wraparound mold which maintains excellent physical and electrical properties in extreme conditions. In addition to jacket repairing, the kits can be used for repairing damaged insulations and making partial or complete cable splices by using standard Scotch Splicing Tapes (see page 4) and flame retardant 3M Scotchcast Compound 2131. Complete instructions are included with each kit. AGENCIES Meets 07-KA060002-MSHA when used with 3M Scotchcast Compound 2131. Each kit contains: Reusable wraparound mold Pouring spouts and enough spacer web to make ten cable jacket repairs 3M Scotchcast Compound 2131 can be used as a jacket replacement compound and is purchased separately. ORDERING INFORMATION Kit Number Cable O.D. Range Inches (mm) Maximum Repair Length Inches (mm) M-20 1.6-2.5 (41-63) 13-15* (330) M-30 1.85-4.0 (47-102) 20 (508) M-40 1.85-6.0 (47-152) 32 (813) *13" for SHD-GC; 15" for 600/2000 V COMPOUND 2131 FOR M-20, M-30, M40 JACKET REPAIR KITS Nominal Recommended Number of C bags per repair Nominal Repair Length Cable O.D. (in.) (mm) 8 Inches (203 mm) 16 Inches (406 mm) 1.6 (41) 1 2 3 2.0 (51) 1 2 4 2.4 (61) 2 3 5 2.8 (71) 2 4 7 3.2 (81) 3 5 9 3.6 (91) 3 6 11 4.0 (102) 4 7 13 32 Inches (813 mm) 3M Scotchcast Flame-Retardant Compound 2131 2131 FLAME RETARDANT COMPOUND 3M Scotchcast Compound 2131 is a flame retardant compound designed primarily to replace the cable jacket when splicing or repairing mine and portable cable. The self-contained mixing and pouring bag makes on-site repairs easy and convenient. Plus the unique formulation bonds to all modern cable jackets yet remains flexible. The 3M Scotchcast Compound 2131 provides excellent multi-purpose moisture sealing and is ideal for plugs and cable crotch seals. Compound 2131 is used in the 3M Scotchcast 8096 Series, M-series Kits and 82F(BF) Series Kits. ORDERING INFORMATION Product Weight/Volume Number 2131-217g 7.6 oz (217g) 10.7 cu. in (27,2 cu. cm) 2131-612g 21.7 oz (612g) 30.5 cu. in (77,5 cu. cm) REPLACEMENT MATERIALS F-10 Funnels and SW-40 Spacer Available as separate items. 16

Electrical Solutions Heat Shrink Tubing ITCSF/IMCSF 3M Heat Shrink Tubing ITCSF/IMCSF Flame Retardant ITCSF Cable Sleeves Heat Shrinkable Cable Sleeves ITCSF, rated to 1 kv, provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSF Thick-Wall Cable Sleeves are made from flame retardant, polyolefin. They are durable and split resistant and provide strain relief and rapid installation. The 48'' sleeves come standard with a factory-applied adhesive/sealant. Sleeves are supplied in black only. P-154-13 MSHA. ABS Certificate. Other cut lengths may be available upon request. Flame Retardant IMCSF Cable Sleeves Heat Shrinkable Medium-Wall Cable Sleeves IMCSF are made of flame-retardant polyolefin. Use for 1 kv splices, connections, terminations and rejacketing. They protect against mechanical and environmental dangers providing excellent abrasion, corrosion and chemical resistance. IMCSF sleeves have greater flexibility than the ITCSF, our thicker-walled version. Installation of these fast-shrinking sleeves is easy with little training necessary. The 48'' lengths come standard with a factory-applied adhesive/sealant. Sleeves are supplied in black only. P-154-13 MSHA. ABS Certificate 96NY595-X Other cut lengths may be available upon request. Product Number Typical Cable Range Expanded/ Recovery I.D. ITCSF-0400-48 12-6 AWG (4-10 mm 2 ) 0.40/0.15 (10,2/3,8 mm) ITCSF-0800-48 8-1/0 AWG (10-50 mm 2 ) 0.80/0.20 (20,3/5,1 mm) ITCSF-1100-48 2-4/0 AWG (35-95 mm 2 ) 1.10/0.37 (27,9/9,4 mm) ITCSF-1500-48 3/0 AWG-400 kcmil (95-185 mm 2 ) 1.50/0.50 (38,1/12,7 mm) ITCSF-2000-48 250-750 kcmil (150-300 mm 2 ) 2.00/0.65 (50,8/16,5 mm) IMCSF products are available in the same lengths with the same range and inside diameter as ITCSF products Corrosion Protection Tapes SCOTCHRAP TM ALL-WEATHER CORROSION PROTECTION TAPE 50 AND 51 These 10- and 20-mil tapes are designed to offer all-weather performance and corrosion resistance and have a high-quality adhesive. Apply these tapes over a wide temperature range for resistance to impact, abrasions and punctures. Scotchrap TM All-Weather Corrosion Protection Tapes 50 and 51 are used for corrosion protection on pipes, conduits and fittings, etc. UV resistance is excellent. It has a temperature rating of 176 F (80 C). NOTE: Scotchrap TM Pipe Primer should be used with all corrosion protection tapes. SCOTCHRAP TM PIPE PRIMER A quick-drying, non-sag rubber base primer that is designed to permeate metal surface pits and irregularities, preparing the surface for tape application. Compatible with the special adhesive on Scotchrap TM Tapes, it enhances adhesion. To be used with Scotchrap TM All-Weather Corrosion Protection Tapes 50 and 51. 3M Scotchrap Tape 50 & 51 and Pipe Primer 17

Cold Shrink Corrosion Protection Kit CPT Series The 3M CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors. 3M Product Number Cable O.D. Minimum Cable O.D. Maximum Maximum Installed Length CPT-1/2 0.50 in (13 mm) 1.60 in (41 mm) 4.50 in (114 mm) CPT-3/4 0.66 in (17 mm) 1.90 in (48 mm) 4.80 in (122 mm) CPT-1 0.66 in (17 mm) 2.20 in (56 mm) 4.80 in (122 mm) CPT-1-1/4 1.22 in (31 mm) 2.65 in (67 mm) 4.80 in (122 mm) CPT-1-1/2 1.40 in (36 mm) 3.00 in (76 mm) 5.50 in (140 mm) CPT-2 1.68 in (43 mm) 3.60 in (91 mm) 6.50 in (165 mm) CPT-2-1/2 1.97 in (50 mm) 4.30 in (109 mm) 8.50 in (215 mm) CPT-3 2.60 in (66 mm) 5.40 in (137 mm) 8.50 in (215 mm) CPT-3-1/2 2.90 in (74 mm) 6.00 in (152 mm) 10.0 in (254 mm) CPT-4 2.90 in (74 mm) 6.00 in (152 mm) 10.5 in (267 mm) 3M Cold Shrink Corrosion Protection Kit CPT Series Cold Shrink End Caps EC Series The 3M CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors. 3M Cold Shrink End Caps EC-Series Cable Cleaning Products CC-Series NON-CONDUCTING, EVAPORATES QUICKLY Designed to be compatible with all solid dielectric cable insulations and will not cause tracking on insulation surfaces. Instructions for cleaning surfaces can be found on the product labels. Product Number CC-2 CC-3 Product Description Cable Cleaning Preparation Kit; includes 3 pads and non-conductive grit abrasive cloth Cable Cleaning Pads, 3 pads per kit 3M Cable Preparation Kit CC-2, CC-3 18

Electrical Solutions Cable Preparation and Indentification 3M Cable Preparation Kit CPK-A No matter how well a cable splice or termination is designed, it will quickly fail if the cable is not properly prepared before installation. Prepare cables quickly, efficiently, and with consistent precision and reliability using the tools in the 3M CPK-A Kit. Each tool kit contains: 1542-2CL-1 Insulation Stripper with Wedge Blade 1700SS Semi-con Scorer with Adjustable Blade SC10 Semi-con Edge Wedge with Sheath SC12 Semi-con Roller Grip 3M Cable Preparation Kit CPK-A CC-600 Cable Cutter CC-2 Cable Cleaning Kits (4) Scotchcode TM Wire Marking Products 3M ScotchCode Identification Systems ScotchCode TM Identification Solutions give you dozens of ways to mark your indoor and outdoor assets. This line includes: Dispensers with Preprinted Alphanumeric or NEMA Coloured Refill Tapes Preprinted Wire Marker Books Marker Books and Dispensers with Write-On Labels Dispensers with Write-On Tags Marker Pens with Quick-Drying, UV and Water Resistant Ink 19

Portable Labellers PL150, PL200 and PL300 With electrical equipment, it's essential to properly identify and label wires and components. 3M Identification Systems provides these critical products to panel makers, original equipment manufacturers and industrial sector suppliers. In particular, 3M Portable Labellers can help you by printing on a wide range of label materials, including vinyl, polyester, nylon and heat shrink. All units feature exclusive one-touch Hot Keys that provide shortcuts for common formatting tasks. The most recent addition to our Wire ID family is the PL150 model with a QWERTY keyboard. 3M Portable Labeller PL300 3M Portable Labellers PL150, PL200 and PL300 Portable Labeller Cartridges AVAILABLE REFILL OPTIONS Vinyl tape (various colours) Polyester tape Flexible Nylon tape Heat shrink tubing 3M Portable Labeller Refill Cartridges Metal Tape Embosser PLE The 3M Portable Labeller Embosser PLE is a tough cast-aluminum labeller for imprinting metal tapes that withstand weather, termperature and corrosion. A cable tie slot is available for cable marking and a front scissor cutoff allows fast and easy label application. The labeler also has a built-in hole punching device that makes hanging and tacking a breeze. 3M Metal Tape Embosser PLE 20

Electrical Solutions Novec TM Aerosol Cleaners 3M Novec Aerosol Cleaners are a revolutionary line of nonflammable spray cleaning solvents that combine effective cleaning performance with a wide margin of workplace safety and a favorable environmental profile. separately. FEATURES AND BENEFITS Fast drying, leaves no residue Nonflammable; Low toxicity Non-corrosive Non-ozone depleting No HCFCs, HFCs, npb, or HAPs Over 95% active solvent, for more cleans per caniec 608 3M Novec Aerosol Cleaners Novec TM 1230 Fire Protection Fluid ADVANCED CLEAN AGENT FIRE PROTECTION FOR YOUR MOST VALUABLE ASSETS 3M Novec 1230 Fire Protection Fluid THE NEXT GENERATION OF HALON REPLACEMENT TECHNOLOGY Based on a proprietary chemistry from 3M, Novec 1230 fluid addresses industry needs for clean agent fire protection that is safe and effective, while offering an environmental profile that other halocarbon agents like HFCs can t begin to match: Zero ozone depletion potential 5-day atmospheric lifetime Global warming potential of 1 In addition, Novec 1230 Fire Protection Fluid is non-conductive and leaves no residue. It will not short out your electrical equipment and there is no clean up required. www.3m.com/novec Phone immersed in Novec 1230 21

TTS TM for Pipe Freeze and Roof and Gutter Application CONSTRUCTION 3M Self-regulating Heat Tracing Cables consist of two parallel, current-transmitting copper conductors, between which a semiconducting heating element is embedded. The current flows between the two copper conductors. This provides an infinite number of parallel resistances. Therefore the Heat Tracing Cable can be cut to any desired length without changing its properties. In accordance with VDE 0100, the copper mesh serves as a safety conductor and provides a continuous ground path. The outer protective jacket of polyolefin or fluoropolymer protects against corrosion, chemicals, and adverse environmental conditions. PIPE FREEZE Product Number TTS-5-1-OJ TTS-8-1-OJ TTS-10-1-OJ TTS-5-2-OJ TTS-8-2-OJ TTS-10-2-OJ Termination Kits 18-SXG-KIT 1 ECA-1-SR-SP ECT-2-SR PCA-1-SR PCS-1-SR HS-PBSK HS-TBSK ET-6C Installation Accessories BTape CL AL-20P Controls R1-050-DP R3C-0120-DP Description 5 W/FT @ 120V (500/1000 foot spools) 8 W/FT @ 120V (500/1000 foot spools) 10 W/FT @ 120V (500/1000 foot spools) 5 W/FT @ 240V (500/1000 foot spools) 8 W/FT @ 240V (500/1000 foot spools) 10 W/FT @ 240V (500/1000 foot spools) Description Power Connection Gland Kit w/o Junction Box Metallic Power Connection Kit (Ordinary & Div 2 Aproved) with Junction Box Metallic T-Splice Kit (Ordinary & Div 2 Aproved) with Junction Box Non-metallic Power Connection Kit (Ordinary & Div 2 Aproved) with Junction Box Non-metallic T-Splice Kit (Ordinary & Div 2 Aproved) with Splice Cover Inline Heat Shrink Splice Kit (Under Insulation) T-Splice Heat Shrink Kit (Under Insulation) End Termination Kit (Ordinary & Div 2 Approved) Description Binding / Attachment Tape (1/2" X 60 yds) Caution Labels (25 per Pack) Aluminum Tape (2 X 150 ) for non-metallic pipe Description Indoor Thermostat Weatherproof Indoor / Outdoor Thermostat 22 ROOF AND GUTTER Cable TTS-8-1-OJ TTS-8-2-OJ Termination Kits 18-SXG-KIT 1 ET-4S HS-PBSK HS-TBSK Installation Accessories AL-20P CL RG-CMC RG-CRF RG-DCH Controls STC-DS2B STC-DS-8 RC3-0120-DP 1 Junction box supplied by installer Description 8 W/FT @ 120V (500 / 1000 Foot Spools) 8 W/FT @ 240 (500 / 1000 Foot Spools) Description Power Connection Gland Kit w/o Junction Box End Termination Kit Inline Splice with Heat Shrink T-Splice with Heat Shrink Description Aluminum Tape (2" X 150") in gutter Caution Labels (25 per Pack) P Style Roof, Cable Mounting Clips (100/Bag) Roof Clips, Cable Roof Fastener (25/Bag) Downspout Cable Hanger Description Snow and Ice Sensor, Pole Mounted Snow and Ice Sensor with a 10' Remote Lead Wire Weatherproof Indoor / Outdoor Thermostat ADVANTAGES Self-regulating No overheating CERTIFICATES AND APPROVALS Class 1 Div 2 Class 2 Div 2 For concrete or ashphalt slab heating applications contact your local 3M Canada Representative.

Electrical Solutions Aluminum Conductor Composite Reinforced (ACCR) 3M ACCR provides reliable upgrade capacity, even in some of today s most challenging applications. 3M ACCR is an advanced transmission conductor designed to replace ACSR or ACSS on existing structures, giving you up to two times the capacity, without the risks of a major construction project. Our highly qualified and experienced engineers can work with you to match the best 3M ACCR option to your needs. For specifications of all 3M ACCR sizes, as well as a complete library of lab and field tests, visit our website: www.3m.com/accr 3M Aluminum Conductor Composite Reinforced (ACCR) Flexible Insulation Solutions 3M High-Temperature Flexible Insulation papers and laminates provide premiumperformance, cost-effective insulation which is an easy-to-use alternative for wire wrapping and for the manufacture and repair of motors, transformers, generators and other electrical devices. There are several families of products meet your needs, including: 3M CeQUIN Inorganic Insulating Products 3M ThermaVolt Calendered Inorganic Insulating Products 3M TufQUIN Inorganic-Organic Hybrid Insulating Products 3M TuFR Flame-Retardant Insulating Paper www.3m.com/flexibleinsulation 3M High-Temperature Flexible Insulation papers and laminates 23

Ask about these additional electrical solutions from 3M Wire Connectors Separable Connectors Fastening Products 3M Worldwide, World Class Fire Protection Specialty Tapes Safety, Security and Protection 3M develops, manufactures and markets over 50,000 different consumer, commercial, industrial and health care products. We have manufacturing operations in 60 countries and do business in more than 200 countries. 3M can help you achieve corporate goals, meet and exceed government standards, simplify and improve the lives of your employees, and contribute to a safe, healthy and sustainable work environment. For More Information Customer Assistance 1-800-3M HELPS Internet www.3m.ca/electrical www.3m.com/mining/canada Important Notice All statements, technical information, and recommendations contained in this literature are based on information and testing 3M believes to be reliable. However, many factors beyond 3M s control can affect a product s use. The user is responsible to evaluate the 3M product to determine whether the product is fit for the user's particular purpose and application. Warranties and exclusive limited remedies for the products described in this literature are expressly stated on individual product literature, packaging, and data sheets. 3M warranties and limited remedies may not be created or modified orally. 3M offers no other remedies and makes no other warranties or conditions, express or implied, including any implied warranty or condition of merchantability or fitness for a particular purpose. 3 Mining and Mineral Extraction 3M Canada Company Post Office Box 5757 London, Ontario N6A 4T1 Canada 3M, JobBox, Novec, Scotch, Scotchcast, ScotchCode, Scotchfil, Scotchrap, Scotchlok, Super 33+, Scotch-Seal, Temflex are trademarks of 3M. Used under license in Canada. TTS is a trademark of 3M Canada. Unishield is a trademark of BICC Cables. Krytox is a trademark of Dupont. Please recycle. All other trademarks referenced are the service marks, trademarks or registered trademarks of their respective companies. Printed in Canada. 2013, 3M. All rights reserved. 1209-02494E