Scope of the art R&S Scope Rider Handheld digital oscilloscope

Lab performance in a rugged and portable design Invest 2 minutes and you ll never look back. RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 1 60 MHz to 500 MHz Isolated, CAT IV year Product Brochure Version 07.01 Scope of the art R&S Scope Rider Handheld digital oscilloscope 25.09.2017 12:29:19

R&S Scope Rider Experience our handheld scope for 2 minutes and you ll never look back In the lab Lab performance in a rugged and portable design the perfect multipurpose tool for the lab or in the field. 7", 800 480 pixel capacitive touch display Superior performance 60 MHz to 500 MHz with 5 Gsample/s sampling rate 50 000 waveforms per second 10-bit A/D converter 2 mv/div to 100 V/div Up to 200 V offset range 33 automatic measurement functions 8 instruments in one handheld package Lab performance oscilloscope Logic analyzer Protocol analyzer I2C/SPI, UART, CAN/LIN, CAN-FD, SENT Data logger Digital multimeter 1) New Spectrum analyzer New Harmonics analyzer Frequency counter New 1)) >4h battery life Switch between all instrument modes One-touch documentation: easily save screenshots and measurements Additional multimeter channel in two-channel model. 2 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 2 25.09.2017 12:29:23

Wireless remote control In the field CAT IV 600 V/CAT III 1000 V: galvanic-insulated floating channels Rugged, dust and water resistant housing Capacitive touch and keypad operation Full operation via touch panel or keypad See more with a 7" color display Easy parameter adjustment with multifunction wheel Large buttons for use with gloves Multifunction wheel Unmatched connectivity: USB, Ethernet and wireless LAN Large buttons, can be used with gloves Outstanding protection M aximum safety in all environments: CAT IV 600 V/CAT III 1000 V IP 51 housing that meets military environmental requirements Nonslip and impact resistant rubberized surface Excellent connectivity and much more Wireless LAN and Ethernet for web-based remote control and quick data access Finish faster with one-touch documentation MicroSD card and USB device/host support More than 4 hours of battery power Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 3 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 3 25.09.2017 12:29:26

Superior performance: a lab oscilloscope in a handheld package In the lab 60 MHz to 500 MHz at up to 5 Gsample/s High-speed acquisition system with history mode 10 bit A/D converter Excellent sensitivity: 2 mv/div to 100 V/div Up to 200 V offset compensation range 33 automatic measurement functions Deep zoom with 500 ksample acquisition memory 4 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 4 25.09.2017 12:29:28

In the lab Lab oscilloscope performance Safe measurements on power electronics When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery- operated handheld device. Analyzing modern electric drive systems requires measuring motor voltages and currents while analyzing digital control signals. Safety is a key consideration for such measurements. Small sensor signals can be analyzed with an excellent vertical sensitivity of 2 mv/div. Triggering on protocol events and decoding protocol data enables convenient debugging of digital control signals. A digital trigger system provides the best trigger sensitivity available in a handheld oscilloscope, and 14 trigger types give the flexibility required to capture exactly the right signal. With 33 automatic measurement functions, the R&S Scope Rider delivers the capabilities of a lab oscilloscope when analyzing signal parameters. The R&S Scope Rider offers up to four isolated input channels with CAT IV 600 V rating that allow measurements on high-voltage electronics without compromising safety. Digital control signals can be analyzed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capability of the R&S Scope Rider is unprecedented in handheld oscilloscopes and provides direct display of decoded messages. High-speed acquisition system with deep history: never miss rare faults again Capturing and analyzing rare anomalies in electric signals is a typical use case when debugging electronic systems. With an acquisition rate of up to 50 000 waveforms per second more than 1000 times faster than conventional handheld oscilloscopes the R&S Scope Rider sees signals other scopes miss. Rare faults in signals can be reliably captured and analyzed. In history mode, the instrument automatically stores up to 5000 waveforms in a separate history buffer. At any point in time, acquisition can be stopped and any waveform in the history buffer can be analyzed using the full oscilloscope functionality. One-time anomalies that would have been missed by a conventional handheld oscilloscope can now be analyzed in detail. The high-speed acquisition system of the R&S Scope Rider captures up to 50 000 waveforms/s and uncovers rare and unexpected signal anomalies. Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 5 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 5 25.09.2017 12:29:29

Debugging power in your hand: eight instruments in one portable design In the lab Oscilloscope, logic and protocol analyzer, data logger, digital multimeter, spectrum analyzer, harmonics analyzer and frequency counter: With the power of eight instruments and dedicated operation modes for XY operation, roll mode and mask testing, the R&S Scope Rider provides the capabilities and the flexibility needed for debugging all kinds of electronic systems. Logic analyzer Motor drive measurements often require up to four analog measurement channels with no channel free for monitoring digital control interfaces. The digital logic probe (MSO) of the R&S Scope Rider features eight additional digital inputs for analyzing control signals, time-correlated to the analog channel signals. With 250 MHz bandwidth, 1.25 Gsample/s sampling rate and configurable thresholds, it adapts to almost any digital interface. Protocol analyzer Serial protocols are often used to transmit control signals. The R&S Scope Rider is the first galvanically isolated, handheld digital oscilloscope that features protocol triggering and decoding capability for in-depth troubleshooting. Targeted triggering on protocol events and protocol data enables users to selectively acquire relevant events, data and signals. Since the R&S Scope Rider supports serial protocols (I2C/SPI, UART, CAN/LIN, CAN-FD, SENT), it can be used in conventional lab and mobile applications as well as in the automotive segment. Data logger Sporadic sensor signal faults or rare glitches in a power supply can cause complex system failures without any obvious indication of the root cause. The long-term data logger of the R&S Scope Rider makes it possible to monitor up to four key measurements at a speed of 1, 2 or 5 measurements per second to uncover such rare failures. The large memory of 2 Msample per channel allows more than 23 days of log duration. The statistics display provides information about minimum and maximum values with exact time. 6 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 6 25.09.2017 12:29:29

In the lab XY operation mode Mask test mode Relative phases between two signals can be easily measured with the dedicated XY mode that also shows the individual time signals. The mask test mode shows pass and fail statistics and makes it easy to set up masks based on test signals. Digital multimeter The two-channel variant R&S features a dedicated, isolated digital multimeter with 10 000 count resolution. Measurement functions include V DC, V AC, V AC + V DC, resistance, continuity and capacitance as well as current or temperature if suitable shunts are used. The four-channel variant R&S features a digital voltmeter on each input channel. Statistics information shows minimum, average and maximum values with corresponding time stamps. Select the instrument you need at the push of a button. Simply better in the lab and in the field Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 7 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 7 25.09.2017 12:29:32

Capacitive touch and keypad operation: intuitive to use Full instrument control via touch panel or keypad Excellent readability and crystal clear signals: 7", 800 480 pixel capacitive touch display Multifunction wheel for easy parameter adjustment Large keys for use with safety gloves In the field Wireless LAN or Ethernet: easy remote control within a web browser An integrated wireless LAN module or the Ethernet port allow the R&S Scope Rider to be remotely controlled directly from the web browser. The touch interface of the R&S Scope Rider is accessible in the web browser. All settings can be adjusted on the PC. Image compression ensures that the screen image is rapidly updated. User interface designed to customer needs Making use of the latest display technology, the R&S Scope Rider provides a crystal clear signal display with a high-resolution capacitive touch color display. Oscilloscope settings can easily be adjusted on the screen while dedicated keys provide quick access to important oscilloscope functions. A central multifunction wheel allows quick adjustment of settings such as the trigger level or the vertical position of each channel. Fully controllable via the keypad, the oscilloscope can also be used with gloves if safety or weather require them. Easy-to-understand diagrams explain important settings such as the trigger mode, the automatic measurement functions or the channel settings. Easy documentation of measurement results Simplify your measurement documentation with documentation project directories on the microsd card or USB flash drive. Screenshots, measurement results and settings files are saved with a single button press in the selected project directory. Data can be easily accessed and downloaded using the web browser interface. Up to 32 Gbyte of data storage capability The R&S Scope Rider supports microsd cards with up to 32 Gbyte storage capability, making it possible to save virtually an unlimited amount of data, screenshots or settings files on the instrument. 8 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 8 25.09.2017 12:29:32

In the field Wireless LAN or Ethernet: easy remote control for safety critical measurements An integrated wireless LAN module and web server allows easy remote control of the R&S Scope Rider. The waveform display and user interface of the R&S Scope Rider are directly available in the web browser; all settings can be changed on the screen. With no software installation required, the R&S Scope Rider can be controlled from almost every portable device such as a laptop, a tablet or even a mobile phone. Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 9 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 9 25.09.2017 12:29:35

Built for your work environment: outstanding protection and ruggedness Isolation of all analog input channels Rated for measurements in CAT III 1000 V/ CAT IV 600 V environments IP 51 housing for harsh environments Nonslip and impact resistant rubberized surface Double insulation for maximum safety Channel 4 Channel 1 Channel 2 Channel 3 DC and/or AC voltage Channel reference In the field Maximum safety in all environments Troubleshooting in industrial environments presents many challenges. Debugging electronic systems at a modern production site can require analyzing low-voltage digital signals, as well as verifying the power quality of a 380 V supply, or testing the power efficiency of electrical drives. The R&S Scope Rider CAT IV 600 V rating provides this level of flexibility in a single device. Highest sensitivity and safe high-voltage measurements at the same time Double isolation of all input channels, the multimeter channel 1) and the digital interfaces, including the logic channel (MSO), make it possible to measure in mixed circuits with different ground levels. This reduces the risk of accidental short circuits and enables safe measurements in high-voltage electric installations. Sensitive analog or digital control circuits can be measured without compromising safety. IP 51 housing tested in line with military environmental standards Thanks to the passive cooling concept, the handheld oscilloscope feature a sealed IP 51, dust and drip-proof housing. Tested in line with military environmental standards, the R&S Scope Rider provides the ruggedness that is needed for harsh environments. A rubberized surface with large keys makes it easy to use in difficult environments. 1) System Separate multimeter channel only in two-channel models. DC input Interfaces Electrical insulation USB, Ethernet MSO logic probe Overview of measurement categories CAT 0 to CAT IV CAT 0 CAT II CAT III CAT IV Power supply Socket Main fuse + Transformer 10 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 10 25.09.2017 12:29:35

Wide range of probes and accessories The R&S Scope Rider comes with all essential accessories as standard: 500 MHz, 10:1, 600 V CAT IV voltage probe for each input channel Power supply with plugs for EU, GB and US Battery pack Soft handle In addition, a wide range of accessories is available: 500 MHz, 100:1, voltage probes Replacement accessory set for voltage probes Extended accessory set for voltage probes Current probes 12 V/24 V car adapter Soft carrying bag Hard shell protective carrying bag Battery charger R&S Scope Rider accessories. Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 11 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 11 25.09.2017 12:29:36

Specifications in brief Specifications in brief Vertical system Input channels Maximum input voltage 2-channel models 2 oscilloscope channels, 1 digital multimeter 4-channel models 4 oscilloscope channels BNC inputs CAT IV 300 V (RMS), 424 V (Vp) with probe R&S RT-ZI10 or R&S RT-ZI11 CAT IV 600 V, CAT III 1000 V Input sensitivity 2 mv/div to 100 V/div Vertical resolution of overall system 9 bit Acquisition and horizontal system Maximum realtime sampling rate 1/2/4 channels active 5/2.5/1.25 Gsample/s Acquisition memory 1/2/4 channels active 500/250/125 ksample/channel Realtime waveform acquisition rate max. 50 000 waveforms/s Timebase range 1 ns/div to 500 s/div Logic analyzer (MSO) functionality (optional: R&S ) Input channels/memory depth 8 logic channels/125 ksample Bandwidth/sampling rate 250 MHz/1.25 Gsample/s Digital trigger system Trigger modes Trigger types auto, normal, single advanced trigger types optional (R&S RTH-K19) 14 trigger types Automatic oscilloscope measurements Automatic measurements 33 measurement functions Mask testing Mask definition tolerance tube Actions on violation none, beep, stop History and segmented memory (optional: R&S RTH-K15) Number of segments up to 5000 Protocol triggering and decoding Supported protocols optional: R&S RTH-K1, R&S RTH-K2 I2C, SPI, UART/RS-232/RS-422/RS-485 Data logger Number of simult. logging channels 4 Measurement speed 1/2/5 measurements/s Memory depth 2 Msample per logging channel Digital voltmeter/digital multimeter Resolution Voltage and current 2-channel version (digital multimeter) 10 000 counts 4-channel version (digital voltmeter) 999 counts current with optional current probe or shunt DC, AC, AC + DC Temperature with PT100 temperature probe Resistance, continuity, diode test, capacity, frequency General data only 2-channel version Dimensions W H D Weight with battery 201 mm 293 mm 74 mm (7.91 in 11.54 in 2.91 in) 2.4 kg (5.3 lb) (nom.) IP rating IP 51, in line with IEC 60529 Screen 7.0" LC TFT 800 480 pixel color display Interfaces USB host, USB device, LAN, wireless LAN (optional) 12 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 12 25.09.2017 12:29:36

Ordering information Designation Type Order No. Handheld Oscilloscope, 60 MHz, 2 channels, CAT IV, DMM R&S Handheld Oscilloscope, 60 MHz, 4 channels, CAT IV R&S Upgrade of R&S oscilloscopes to 100 MHz bandwidth R&S RTH-B221 1325.9717.02 Upgrade of R&S oscilloscopes to 200 MHz bandwidth R&S RTH-B222 1325.9723.02 Upgrade of R&S oscilloscopes to 350 MHz bandwidth R&S RTH-B223 1325.9730.02 Upgrade of R&S oscilloscopes to 500 MHz bandwidth R&S RTH-B224 1326.0571.02 Upgrade of R&S oscilloscopes to 100 MHz bandwidth R&S RTH-B241 1326.0588.02 Upgrade of R&S oscilloscopes to 200 MHz bandwidth R&S RTH-B242 1326.0594.02 Upgrade of R&S oscilloscopes to 350 MHz bandwidth R&S RTH-B243 1326.0607.02 Upgrade of R&S oscilloscopes to 500 MHz bandwidth R&S RTH-B244 1326.0613.02 Choose your R&S Scope Rider base models Choose your bandwidth upgrade Choose your options Mixed Signal Upgrade for non-mso models, 250 MHz R&S I2C/SPI Serial Triggering and Decoding R&S RTH-K1 1325.9969.02 UART/RS-232/RS-422/RS-485 Serial Triggering and Decoding R&S RTH-K2 1325.9975.02 CAN/LIN Serial Triggering and Decoding R&S RTH-K3 1333.0550.02 CAN-FD Serial Triggering and Decoding R&S RTH-K9 1326.3829.02 SENT Serial Triggering and Decoding R&S RTH-K10 1326.3835.02 History and Segmented Memory R&S RTH-K15 1326.1803.02 Spectrum Analysis R&S RTH-K18 1333.0680.02 Advanced Triggering R&S RTH-K19 1326.0642.02 Frequency Counter R&S RTH-K33 1333.0696.02 Harmonics Analysis R&S RTH-K34 1333.0673.02 Wireless LAN, all countries except US and Canada R&S RTH-K200 1326.0620.02 Wireless LAN, for US and Canada only R&S RTH-K200US 1332.9890.02 Web Interface Remote Control R&S RTH-K201 1326.0636.02 Passive Probe, 500 MHz, isolated, 10:1, 10 MΩ,12 pf, 600 V CAT IV, 1000 V CAT III R&S RT-ZI10 1326.1761.02 Passive Probe, 500 MHz, isolated, 100:1, 100 MΩ, 4.6 pf, 600 V CAT IV, 1000 V CAT III, (3540 V CAT I) Passive Probe (laboratory model), 500 MHz, isolated, 10:1, 10 MΩ, 11 pf, 300 V CAT III R&S RT-ZI11 1326.1810.02 R&S RT-ZI10C 1326.3106.02 Set 2 R&S RT-ZI10C passive probe R&S RT-ZI10C-2 1333.1811.02 Set 4 R&S RT-ZI10C passive probe R&S RT-ZI10C-4 1333.1328.02 20 khz, AC/DC, 0.01 V/A and 0.001 V/A, ±200 A and ±2000 A R&S RT-ZC02 1333.0850.02 100 khz, AC/DC, 0.1 V/A, 30 A R&S RT-ZC03 1333.0844.02 Accessory Replacement Set for R&S RT-ZI10/R&S RT-ZI11 R&S RT-ZA20 1326.1978.02 Accessory Extension Set for R&S RT-ZI10/R&S RT-ZI11 R&S RT-ZA21 1326.1984.02 Safety Test Leads, red and black, silicone, 600 V CAT IV R&S RT-ZA22 1326.0988.02 PT100 Temperature Probe R&S RT-ZA12 1333.0809.02 Soft Carrying Bag R&S HA-Z220 1309.6175.00 Ethernet Cable, length: 2 m, crossover R&S HA-Z210 1309.6152.00 USB Cable, length: 1.8 m, standard/mini USB connector R&S HA-Z211 1309.6169.00 Hard Shell Protective Carrying Case R&S RTH-Z4 1326.2774.02 Car Adapter R&S HA-Z302 1321.1340.02 Battery Charger for Lithium-Ion Battery R&S HA-Z303 1321.1328.02 Replacement Battery R&S HA-Z306 1321.1334.02 Spare Power Supply for R&S RTH incl. power plugs for EU, GB, US R&S RT-ZA14 1326.2874.02 Choose your probes Choose your accessories Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 13 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 13 25.09.2017 12:29:36

Preconfigered Two-Channel R&S Scope Rider Packages Package Name Preconfigured 2-channel R&S Scope Rider Package Order No. Package consists of Type Order No. 2-Channel R&S Scope Rider Base Models 60 MHz, 2 channels, CAT IV, DMM 1317.5000P02 RTH1012 100 MHz, 2 channels, CAT IV, DMM 1317.5000P12 RTH-B221 100 MHz bandwidth upgrade for RTH1022 200 MHz, 2 channels, CAT IV, DMM 1317.5000P22 1325.9717.02 RTH-B222 200 MHz bandwidth upgrade for 1325.9723.02 RTH1032 350 MHz, 2 channels, CAT IV, DMM 1317.5000P32 RTH-B223 350 MHz bandwidth upgrade for 1325.9730.02 RTH1052 500 MHz, 2 channels, CAT IV, DMM 1317.5000P52 RTH-B224 500 MHz bandwidth upgrade for 1326.0571.02 2-Channel R&S Scope Rider Mixed Signal Models MSO 60 MHz, 2 channels, CAT IV, DMM, MSO 1317.5000P03 RTH1012MSO 100 MHz, 2 channels, CAT IV, DMM, MSO 1317.5000P13 RTH-B221 100 MHz bandwidth upgrade for RTH1022MSO 200 MHz, 2 channels, CAT IV, DMM, MSO 1317.5000P23 RTH-B222 200 MHz bandwidth upgrade for RTH1032MSO 350 MHz, 2 channels, CAT IV, DMM, MSO 1317.5000P33 RTH1052MSO 500 MHz, 2 channels, CAT IV, DMM, MSO 1317.5000P53 1325.9717.02 1325.9723.02 RTH-B223 350 MHz bandwidth upgrade for 1325.9730.02 RTH-B224 500 MHz bandwidth upgrade for 1326.0571.02 14 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 14 25.09.2017 12:29:36

Oscilloscope portfolio R&S family RTH1000 HMO1002 HMO1202 RTB2000 HMO3000 Bandwidth 60/100/200/350/500 MHz 1) 50/70/100 MHz 1) 100/200/300 MHz 1) 70/100//200/300 MHz 1) 300/400/500 MHz 1) Number of channels 2 plus DMM/4 2 2/4 2/4 V/div 1 MΩ 2 mv to 100 V 1 mv to 10 V 1 mv to 5 V 1 mv to 5 V V/div 50 Ω 1 mv to 10 V 1 mv to 5 V 500 Msample/s per channel 1 Gsample/s (2 channels interleaved) 1 Gsample/s per 1.25 Gsample/s per channel; channel 2.5 Gsample/s (2 channels 2 Gsample/s (2 chan- interleaved) nels interleaved) 2 Gsample/s per channel; 4 Gsample/s (2 channels interleaved) Max. memory (per channel/1 channel active) Segmented memory 1.25 Gsample/s per channel (4-channel model); 2.5 Gsample/s per channel (2-channel model); 5 Gsample/s (all channels interleaved) 125 ksample (4-channel model); 250 ksample (2-channel model); 500 ksample option 500 ksample; 1 Msample 1 Msample; 2 Msample 4 Msample; 8 Msample 10 Msample; 20 Msample (160 Msample in segmented memory mode 2)) option Acquisition rate 50 000 waveforms/s 10 000 waveforms/s 50 000 waveforms/s 5000 waveforms/s (200 000 waveforms/s in segmented memory mode 2)) advanced, digital trigger (14 trigger types) 2) elementary (5 trigger types) basic (6 trigger types) basic (9 trigger types) Vertical Horizontal Sampling rate option Trigger Options Mixed signal option No. of digital channels 1) 8 16 16 Sampling rate of digital channels Max. memory of digital channels Analysis 1.25 Gsample/s 500 Msample/s 1 Gsample/s 1.25 Gsample/s 1 Gsample/s 125 ksample 500 ksample 1 Msample 10 Msample 2 Msample Cursor meas. types 3 11 13 12 Stand. meas. functions 33 31 Mask test elementary (tolerance mask around the signal) Mathematics elementary Serial protocols triggering and decoding 1) I C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN Display functions data logger Applications 1) high resolution frequency coun- ter, advanced spectrum analysis, harmonics analysis Compliance testing 1) Size and resolution 7", color, 800 480 pixel 6.5", color, 640 480 pixel 10.1", color, 1280 800 pixel 6.5", color, 640 480 pixel Operation optimized for touchscreen operation, parallel button operation optimized for fast button operation optimized for touchscreen operation, parallel button operation optimized for fast button operation Size in mm (W H D) 201 293 74 285 175 140 390 220 152 285 175 220 Weight in kg 2.4 2.5 2.5 3.6 Battery lithium-ion, > 4 h basic (math on math) elementary 2 Display and operation General data 1) Upgradeable. 2) Requires an option. RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 15 25.09.2017 12:29:39

RTM2000 RTE1000 RTO2000 200/350/500 MHz/1 GHz 1) 200/350/500 MHz/1/1.5/2 GHz 1) 600 MHz/1/2/3/4/6 GHz 1) 2/4 2/4 2/4 (only 4 channels in 4 GHz and 6 GHz model) 1 mv to 10 V 500 µv to 10 V 1 mv to 10 V (500 μv to 10 V) 2) 1 mv to 2 V 500 µv to 5 V 1 mv to 1 V (500 μv to 1 V) 2) 2.5 Gsample/s per channel; 5 Gsample/s (2 channels interleaved) 5 Gsample/s per channel 10 Gsample/s per channel; 20 Gsample/s (2 channels interleaved in 4 GHz and 6 GHz model) 10 Msample; 20 Msample (460 Msample in segmented memory mode 2)) option standard: 10 Msample/40 Msample; max. upgrade: 50 Msample/200 Msample standard: 50 Msample/200 Msample; max. upgrade: 1 Gsample/2 Gsample standard standard s in mode 2)) 12 500 waveforms/s (200 000 waveforms/s in segmented memory mode 2)) 1 000 000 waveforms/s (2 000 000 waveforms/s in ultra-segmented memory mode) 1 000 000 waveforms/s (3 000 000 waveforms/s in ultra-segmented memory mode) ) basic (7 trigger types) advanced, digital trigger (13 trigger types) advanced, digital trigger (14 trigger types), zone trigger 2) 16 16 16 2.5 Gsample/s 5 Gsample/s 5 Gsample/s 10 Msample; 20 Msample 100 Msample 200 Msample 14 3 3 31 47 47 elementary (tolerance mask around the signal) basic (math on math) advanced (freely configurable, hardware-based) advanced (formula editor) advanced (formula editor) I C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, I2S, MIL-STD-1553, ARINC 429 I C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, I2S, MIL-STD-1553, ARINC 429, FlexRay, CAN FD, USB 2.0/HSIC, Ethernet, Manchester, NRZ, SENT, SpaceWire, CXPI, Broad-R Reach histogram, trend, track 2) I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, I2S, MIL-STD-1553, ARINC 429, FlexRay, CAN FD, USB 2.0/ HSIC, Ethernet, Manchester, NRZ, SENT, SpaceWire, CXPI, Broad-R Reach, MIPI RFFE, MDIO, 8b 10b, MIPI D-PHY, MIPI M-PHY, MIPI M-PHY/UniPro, serial pattern trigger nnel; ed) 2 track 2) 2 power, digital voltmeter (DVM), spectrum R&S RTM applications analysis and spectrogram + 16-bit high definition, advanced spectrum analysis and spectrogram R&S RTE applications + jitter, clock data recovery, I/Q data, RF analysis 0 pixel 8.4", color, 1024 768 pixel 10.4", color, 1024 768 pixel 12.1", color, 1280 800 pixel tton optimized for fast button operation optimized for touchscreen operation, parallel button operation 403 189 142 427 249 204 427 249 204 4.9 8.6 9.6 various options available, for details see data sheet (PD 3607.2684.22) Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 16 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 16 25.09.2017 12:29:44

Preconfigered Four-Channel R&S Scope Rider Packages Package Name Preconfigured 4-channel R&S Scope Rider Package Order No. Package consists of Type Order No. 4-Channel R&S Scope Rider Base Models 60 MHz, 4 channels, CAT IV 1317.5000P04 RTH1014 100 MHz, 4 channels, CAT IV 1317.5000P14 RTH-B241 100 MHz bandwidth upgrade for RTH1024 200 MHz, 4 channels, CAT IV 1317.5000P24 1326.0588.02 RTH-B242 200 MHz bandwidth upgrade for 1326.0594.02 RTH1034 350 MHz, 4 channels, CAT IV 1317.5000P34 RTH-B243 350 MHz bandwidth upgrade for 1326.0607.02 RTH1054 500 MHz, 4 channels, CAT IV 1317.5000P54 RTH-B244 500 MHz bandwidth upgrade for 1326.0613.02 4-Channel R&S Scope Rider Mixed Signal Models MSO 60 MHz, 4 channels, CAT IV, MSO 1317.5000P05 RTH1014MSO 100 MHz, 4 channels, CAT IV, MSO 1317.5000P15 RTH1024MSO 200 MHz, 4 channels, CAT IV, MSO 1317.5000P25 RTH-B241 100 MHz bandwidth upgrade for 1326.0588.02 RTH-B242 200 MHz bandwidth upgrade for RTH1034MSO 350 MHz, 4 channels, CAT IV, MSO RTH1054MSO 500 MHz, 4 channels, CAT IV, MSO 1317.5000P35 1317.5000P55 1326.0594.02 RTH-B243 350 MHz bandwidth upgrade for 1326.0607.02 RTH-B244 500 MHz bandwidth upgrade for 1326.0613.02 Rohde & Schwarz R&S Scope Rider Handheld digital oscilloscope 17 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 17 25.09.2017 12:29:45

Service that adds value Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing. Founded more than 80 years ago, the independent company which is headquartered in Munich, Germany, has an extensive sales and service network with locations in more than 70 countries. Sustainable product design Environmental compatibility and eco-footprint Energy efficiency and low emissions Longevity and optimized total cost of ownership Certified Quality Management ISO 9001 Certified Environmental Management ISO 14001 Rohde & Schwarz GmbH & Co. KG www.rohde-schwarz.com Rohde & Schwarz training www.training.rohde-schwarz.com R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners PD 3607.0517.62 Version 07.01 September 2017 (sk) R&S Scope Rider Handheld digital oscilloscope Data without tolerance limits is not binding Subject to change 2015-2017 Rohde & Schwarz GmbH & Co. KG 81671 Munich, Germany 3607.0517.62 07.01 PDP 1 en Regional contact Europe, Africa, Middle East +49 89 4129 12345 customersupport@rohde-schwarz.com North America 1 888 TEST RSA (1 888 837 87 72) customer.support@rsa.rohde-schwarz.com Latin America +1 410 910 79 88 customersupport.la@rohde-schwarz.com Asia Pacific +65 65 13 04 88 customersupport.asia@rohde-schwarz.com China +86 800 810 82 28 +86 400 650 58 96 customersupport.china@rohde-schwarz.com 3607051762 RTH_Scope_Rider_bro_en_3607-0517-62_v0701.indd 18 25.09.2017 12:29:45