ENTERPRISE COPPER SOLUTIONS

ENTERPRISE COPPER SOLUTIONS

We firmly believe that your network is the key for your organization s success or failure; in can either help you soar, or bring you down. Our mission is to help your company have the network you needed to succeed. Howell is devoted to provide network solutions of the high quality and low costs, which we back up with extended warrantees for your peace of mind. In today s world, being connected is key to survive and prosper. We are here to help you with that.

CAT6A S-FTP CABLE XG SERIES Premise Horizontal Cable, 10 Gibabit Ethernet, 100BaseTX, 100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video, AES/EBU Digital Audio, AES51, RS-422, Noisy Environments HN6A-SFTP-XX-CM HN6A-SFTP-XX-CMR CAT6A Cable, XG Series, 23 AWG, S-FTP,4 Pairs, Solid, CM Jacket, 1000Fts, Wooden-Reel CAT6A Cable, XG Series, 23 AWG, S-FTP,4 Pairs, Solid, CMR Jacket, 1000Fts, Wooden-Reel Available colors: Red (XX replaced by XX); Blue (XX replaced by BL); Gray (XX replaced by GY) GENERAL CHARACTERISTICS : Number of Pairs: 4 Total Number of Conductors: 8 AWG: 23. (0.565 BC +/-0,015mm) Stranding: Solid Conductor Material: BC - Bare Copper Insulation Material: PE (Skin-Foam-Skin) Shield: Aluminum Braid Screen: Aluminum Foil Outer Jacket Material: CM/CMR PVC Outer Jacket Color: Blue, Red and Gray Plenum (Y/N): N - UL & c(ul) Type CMR (UL 1666) Applications: X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD Packaging Presentation: Wooden-Reel ELECTRICAL CHARACTERISTICS : Spark test 2,000 ± 250 Vac Mutual capacitance max 5,600 pf / 100 m (328 ft) Impedance 100 Ohm ± 15% (4-100 MHz) / ± 22% (100-200 MHz) / ± 32% (200-1000 MHz) Resistance CC Conductor : 78,0 ohm/1000 m (328 ft) @ 20 C Resistance unbalance max 2.5 % Propagation Velocity 72%, Dielectric strength 2,500 Vdc / 3 seconds Capacitance unbalance max 330 pf / 100 m (328 ft) ELECTRICAL CHARACTERISTICS - PREMISE Freq. (MHz) Max. Attenuatio Min. NEXT n (db/100 (db) m) Min. PSNEXT (db) Min. ELFEXT (db) Min. PSELFEXT (db) Min RL (db) Input (Unfitted) Imp. (Ohms) Min. ACR- F (db) 4 3,800 65.3 63.3 55.8 52.8 23000 100 ± 15 55.8 8 5,100 60.7 58.7 49.7 46.7 24500 100 ± 15 50.1 10 5,300 59.3 57.3 47.8 44.9 25000 100 ± 15 47.8 16 7,500 56.3 54.2 43.7 40.7 25000 100 ± 15 43.7 20 8,400 54.8 52.8 41.8 38.8 25000 100 ± 15 41.8 25 9,200 53.4 51.4 39.7 36.6 24300 100 ± 15 39.7 31.25 10,500 51.9 49.9 37.9 34.8 23600 100 ± 15 37.9 62.5 15,000 47.5 45.4 31.9 28.8 21600 100 ± 15 31.9 100 19,100 44.3 42.3 27.8 24.8 20100 100 ± 15 27.8 200 27,600 39.7 37.8 21.8 18.7 18000 100 ± 15 21.8 250 31,000 38.4 36.4 19.9 16.9 17300 100 ± 15 19.2 300 34,300 37.1 35.1 18.2 15.2 16800 100 ± 15 18.3 500 45,300 33.7 31.8 13.9 10.9 15200 100 ± 15 13.8 600 52,300 31.4 29.2 10.5 - - - - 100 ± 15 - -

CAT6A UTP CABLE 580 SERIES Premise Horizontal Cable, 1000BaseT, 100BaseTX, 100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video, AES/EBU Digital Audio, AES51, RS-422, Noisy Environments HN6A-UTP-XX-CM HN6A-UTP-XX-CM CAT6A Cable, 580 Series, 23AWG, UTP,4 Pairs, Solid, CM Jacket, 1000 Fts, Wooden-Reel CAT6A Cable, 580 Series, 23AWG, UTP,4 Pairs, Solid, CMR Jacket, 1000 Fts, Wooden-Reel Available colors: Red (XX replaced by XX); Blue (XX replaced by BL); Gray (XX replaced by GY) GENERAL CHARACTERISTICS : Number of Pairs: 4. Total Number of Conductors: 8. AWG: 23. (0.560 BC +/-0,015mm) Stranding: Solid. Conductor Material: BC - Bare Copper. Insulation Material: PO - Polyolefin. Outer Shield Material: Shielded. Outer Jacket Material: PVC - Polyvinyl Chloride. Outer Jacket Color: Blue, Red and Gray. Plenum (Y/N): N - UL & c(ul) Type CMR (UL 1666) Applications: X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD Packaging Presentation: Wooden-Reel. ELECTRICAL CHARACTERISTICS : Spark test 2,000 ± 250 Vac Mutual capacitance max 5,600 pf / 100 m (328 ft) Impedance 100 Ohm ± 15% (1-62,5 MHz) / ± 22% (62,5-200 MHz) / ± 25% (200-600 MHz) Resistance CC Conductor : 66,60 ohm/1000 m (328 ft) @ 20 C Resistance unbalance max 5 % Propagation Velocity 72%, Dielectric strength 2,500 Vdc / 3 seconds Capacitance unbalance max 330 pf / 100 m (328 ft) ELECTRICAL CHARACTERISTICS - PREMISE

CAT6 UTP CABLE 550 SERIES Premise Horizontal Cable, 1000BaseT (Gigabit Ethernet), 100BaseTX, 100BaseVG ANYLAN, 155ATM, 622ATM, NTSC/PAL Component or Composite Video, AES/EBU Digital Audio, AES51, RS-422, Noisy Environments HN6-UTP-XX-CM HN6-UTP-XX-CMR CAT6 Cable, 550 Series, 23 AWG, UTP,4 Pairs, Solid, CM Jacket, 1000 Fts, Pull-Box CAT6 Cable, 550 Series, 23 AWG, UTP,4 Pairs, Solid, CMR Jacket, 1000 Fts, Pull-Box Available colors: Red (XX replaced by XX); Blue (XX replaced by BL); Gray (XX replaced by GY) GENERAL CHARACTERISTICS : Number of Pairs: 4. Total Number of Conductors: 8. AWG: 23. (0.545 BC +/-0,015mm) Stranding: Solid. Conductor Material: BC - Bare Copper. Insulation Material: PO - Polyolefin. Outer Shield Material: Unshielded. Outer Jacket Material: CM/CMR PVC Outer Jacket Color: Blue, Red and Gray. Plenum (Y/N): N - UL & c(ul) Type CMR (UL 1666) Applications: X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD Packing Presentation: Pull-Pack. ELECTRICAL CHARACTERISTICS : Spark test 2,000 ± 250 Vac Dielectric strength 2,500 Vdc / 3 seconds Insulation resistance min 150 MOhm/km (46 MOhm/kft) Conductor resistance max 9.38 Ohm / 100 m (328 ft) @ 20 C Resistance unbalance max 5 % Propagation Velocity 72%, Dielectric strength 2,500 Vdc / 3 seconds Capacitance unbalance max 330 pf / 100 m (328 ft) Mutual capacitance max 5,600 pf / 100 m (328 ft) ELECTRICAL CHARACTERISTICS - PREMISE

CAT5e UTP CABLE 350 SERIES Premise Horizontal Cable,IEEE 802.3: 1000BaseT (Gigabit Ethernet),100BaseTX,100BaseVG ANYLAN,52/155 Mp/s ATM, ANSI X3.263: 100mB/S, 4/16 Mb/s Token Ring, 22ATM,NTSC/PAL Component or Composite Video,AES/EBU,Digital Video,RS-422 HN5E-UTP-XX-CM HN5E-UTP-XX-CMR CAT5e Cable, 350 Series, 24AWG, UTP,4 Pairs, Solid, CM Jacket, 1000 Fts, Pull-Box CAT5e Cable, 350 Series, 24AWG, UTP,4 Pairs, Solid, CM Jacket, 1000 Fts, Pull-Box Available colors: Red (XX replaced by RD); Blue (XX replaced by BL); Gray (XX replaced by GY) GENERAL CHARACTERISTICS : Number of Pairs: 4. Total Number of Conductors: 8. AWG: 24. (0.480 BC +/-0,015mm) Stranding: Solid. Conductor Material: BC - Bare Copper. Insulation Material: PO - Polyolefin. Outer Shield Material: Unshielded. Outer Jacket Material: PVC - Polyvinyl Chloride. Outer Jacket Color: Blue, Red and Gray. Plenum (Y/N): N - UL & c(ul) Type CMR (UL 1666) Applications: X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD. Packing Presentation: Pull-Pack. ELECTRICAL CHARACTERISTICS : Spark test 2,000 ± 250 Vac Dielectric strength 2,500 Vdc / 3 seconds Insulation resistance min 150 MOhm/km (46 MOhm/kft) Conductor resistance max 9.38 Ohm / 100 m (328 ft) @ 20 C Resistance unbalance max 5 % Capacitance unbalance max 330 pf / 100 m (328 ft) Mutual capacitance max 5,600 pf / 100 m (328 ft) ELECTRICAL CHARACTERISTICS - PREMISE Frequenc y (MHz) Max. Attenuatio Min. NEXT n (db/100 (db) m) Min. PSNEXT (db) Min. ACR (db) Min. PSACR (db) Min. Return Loss (db) Min. Structural Return Loss (db) Input (Unfitted) Impedanc e ( ) Fitted Impedanc e ( ) Min. ELFEXT (db) 1 2.0 65.3 62.3 63.0 60.3 20.0 23.0 100 ± 15 100 ± 15 63.8 60.8 4 4.1 56.3 53.3 51.0 49.2 23.0 23.0 100 ± 15 100 ± 15 51.7 48.7 8 5.8 51.8 48.8 46.0 43.0 24.5 24.5 100 ± 15 100 ± 15 45.7 42.7 10 6.5 50.3 47.3 43.0 40.8 25.0 25.0 100 ± 15 100 ± 15 43.8 40.8 16 8.2 47.3 44.3 39.0 36.0 25.0 25.0 100 ± 15 100 ± 15 39.7 36.7 20 9.3 45.8 42.8 36.5 33.5 25.0 25.0 100 ± 15 100 ± 15 37.7 34.7 25 10.4 44.3 41.3 33.9 30.9 24.3 24.3 100 ± 15 100 ± 15 35.8 32.8 31.25 11.7 42.9 39.9 31.0 28.2 23.6 23.6 100 ± 15 100 ± 15 33.9 30.9 62.5 17.0 38.4 35.4 22.0 19.0 21.5 21.5 100 ± 15 100 ± 15 27.8 24.9 100 22.0 35.3 32.3 14.0 10.3 20.1 20.1 100 ± 15 100 ± 15 23.8 20.8 155 28.1 32.5 29.5 4.4 1.4 15.8-100 ± 25 100 ± 15 19.9 16.9 200 32.0 30.8 27.8 4.0 1.0 15.0-100 ± 25 100 ± 15 17.7 14.7 Min. PSELFEX T (db)

UNLOADED SHIELDED PANELS HNSHP-24P- BK 24 PORT 19" SHIELDED UNLOADED PANEL Howell Network s modular panels are designed to fit all of our high density keystone jacks and keystone frame products used in Ethernet installations, which also exceeds ANSI/TIA/EIA-568 C.2 standards. Designed to mount on any standard 19-inch horizontal rack or cabinet, this panel is offered in a 24-port configuration. Shielded unloaded panels are made to be fitted with 10G screened keystone connectors supporting both T568A and T568B wiring using an easy-to-read color-code wiring label. Panels are provided with a newly designed cable management bar that easily mounts to the back of the panel without the need for mounting screws. This cable management bar features improved cable routing and strain relief. Key Features: High Density Black powder coat finish. Protective shielding to practically eliminate crosstalk and electromagnetic interference. 24 ports. Rated for at least 750 plug insertions providing for the highest level of system reliability. Maximum strength and durability construction. Improved cable routing and strain relief Cable management bar included 1 Unit rack

UNLOADED MODULAR PANELS HNMP-24P-BK 24 PORT 19 UNLOADED PANEL Howell Network s modular panels are designed to fit all of our high density keystone jacks and keystone frame products used in Ethernet installations, which also exceeds ANSI/TIA/EIA-568 C.2 standards. Designed to mount on any standard 19-inch horizontal rack or cabinet, this panel is offered in a 24-port configuration. Unloaded panels are made to be fitted with our Howell Network keystone connectors supporting both T568A and T568B wiring using an easy-to-read color-code wiring label. Panels are provided with a newly designed cable management bar that easily mounts to the back of the panel without the need for mounting screws. This cable management bar features improved cable routing and strain relief. Key Features: High Density Black powder coat finish. Protective shielding to practically eliminate crosstalk and electromagnetic interference. 24 ports. Rated for at least 750 plug insertions providing for the highest level of system reliability. Maximum strength and durability construction. Improved cable routing and strain relief Cable management bar included 1 Unit rack

CAT6 & CAT5e PATCH PANELS CATEGORY 6 PATCH PANELS HN6-PP-16-BK 16 PORT CAT 6 19" PATCHPANEL T568A /B HN6-PP-24-BK 24 PORT CAT 6 19" PATCHPANEL T568A /B HN6-PP-48-BK 48 PORT CAT 6 19" PATCHPANEL T568A /B CATEGORY 5e PATCH PANELS HN5e-PP-16-BK 16 PORT CAT 5e 19" PATCHPANEL T568A /B HN5e-PP-24-BK 24 PORT CAT 5e 19" PATCHPANEL T568A /B HN5e-PP-48-BK 48 PORT CAT 5e 19" PATCHPANEL T568A /B Howell Network Patch Panels are designed to exceed all TIA /EIA -568-B performance specifications. These high-density panels are available in a variety of port size for both rack mount and wall mount applications. Panels feature front and rear labeling capabilities for easy circuit identification. Panels support both T568A and T568B wiring configurations using an easy to read color-coded label. Panels are constructed for maximum strength and durability and feature a fully enclosed 6-port modular design providing flexibility and protection of printed circuitry. Rear termination is made quick and easy using a 110 type connector compatible with standar multi-pair impact tool to reduce installation time or single position 110 or term ination tool. Panels include an integrated cable management feature for cable routing and strain relief requirements. An optional cable management bareasily mounted to the back of the panel is avaible for im proved rou ting and s train relief functions. Key Features: Transmission performance exceeds ANSI/TIA-568-C.2 performance specifications. Termination is made quick and easy using a tool-less termination. Contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs. Connector contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs. Rated for at least 750 plug insertions providing for the highest level of system reliability. Maximum strength and durability construction.

CAT6A KEYSTONE JACKS XG SERIES HN6A-SHKJ-880 CAT 6A 180 DEG. SHIELDED KEYSTONE JACK T568A/B Howell Network CAT 6A screened keystone jacks are designed to meet 10 Gigabit IEEE 802.3an rev. 1.0 transmission requirements, and are guaranteed to meet or exceed TIA-568-C.2 performance specifications. Screened keystone jacks with an overall overlap solid shielding design support category 6A 100-meter channel performance. Category 6A screened keystone jacks are compatible with Howell Network keystone faceplates (1-, 2-, and 4-port) and snap-in patch pan-els (24-port 1-RMS and 48-port 2-RMS) providing flexibility in field installation and easy connection to the telecommunications bond-ing and grounding system. KEY FEATURES Designed to meet 10G IEEE 802.3an transmission requirements. Guaranteed to meet or exceed TIA-568-C.2 performance specifications. Support category 6A 100-meter channel performance. 180 high density compatible with all Howell keystone faceplates, surface mount boxes, and snap-in patch panels. Contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs. 110-type contacts provide improved wire retention and ease of termination. Compatible with Howell Network unloaded snap-in panels. Overall solid shielding design. Rated for at least 750 plug insertions providing for the highest level of system reliability. T568A and T568B wiring with an easy to read color-code wiring label for maximum flexibility. Terminated with standard single-position 110 or Howell four-pair termination tools. TECHNICAL SPECIFICATIONS Transmission Performance: ANSI/TIA-568-C.2: exceeds category 6A (1-500 MHz) specifications. Transmission Media: Unscreened (U/UTP) or screened (U/STP, F/UTP, F/STP, S/UTP, S/STP, SF/UTP, SF/STP) twisted pair. Jack Type: 8p8c (8-position, 8-contact) "RJ45" style Wiring Scheme: ANSI/TIA-568-C.2: T568A & T568B, ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8) Wire Gauge: 22-24 AWG (0.644-0.511 mm) Electrical Specifications: Insulation resistance - min 500 MOhm @ 100 Vdc. Dielectric withstanding voltage - 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min. 1,500 Vdc/ac peak contact-to-panel @ 60 Hz for 1 min. Spring wire contact resistance: max 20 mohm. IDC contact resistance: max 2.5 mohm. Construction: Housing - zinc-alloy fully shielded. Grounding post for 2.5 x 0.5-mm (0.110 x 0.020-in) female disconnect. Jack spring wire - phosphor bronze alloy plated with 50 μin of gold over 70-100 μin of nickel.

CAT 6A 180 DEG. KEYSTONE JACK HN6A-KJ-880-BK HN6A-KJ-880-BL HN6A-KJ-880-GY HN6A-KJ-880-WH CAT 6A 180 DEG. KEYSTONE JACK T56A8A/B -BLACK CAT 6A 180 DEG. KEYSTONE JACK T56A8A/B -BLUE CAT 6A 180 DEG. KEYSTONE JACK T56A8A/B -GRAY CAT 6A 180 DEG. KEYSTONE JACK T56A8A/B-WHITE HOWELL NETWORK CAT 6A keystone jacks are designed to exceed category 6A (1-500 MHz) component specifications, and are guaranteed to meet or exceed TIA-568-C.2 performance specifications. Category 6A keystone jacks are compatible with Howell Network keystone faceplates (1, 2, and 4 port) and snap-in patch panels (24-port 1- RMS and 48-port 2-RMS) providing flexibility in field installation and easy connection to the telecommunications bonding and grounding system. KEY FEATURES: Designed to meet 10G IEEE 802.3an transmission requirements. Guaranteed to meet or exceed TIA-568-C.2 performance specifications. Support category 6A 100-meter channel performance 180 high density compatible with all Howell Network keystone faceplates, surface mount boxes, and snap-in patch panels. Contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs. Rated for at least 750 plug insertions providing for the highest level of system reliability T568A and T568B wiring with an easy to read color-code wiring label for maximum flexibility Terminated with standard single-position 110 or Howell Network four-pair termination tools. Compatible with Howell Network unloaded snapin panels. 110-type contacts provide improved wire retention and ease of termination. TECHNICAL SPECIFICATIONS: Transmission Performance: ANSI/TIA-568-C.2: exceeds category 6A (1-500 MHz) specifications. Transmission Media: Unscreened U/UTP twisted pair. Jack Type: 8p8c (8-position, 8-contact) "RJ45" style. Wiring Scheme: ANSI/TIA-568-C.2: T568A & T568B. ISO/IEC 11801 2nd Ed: 8-position pin/pair assignment (1-2/3-6/4-5/7-8) Wire Gauge: 22-24 AWG (0.644-0.511 mm). Construction: Housing - PC Jack spring wire: phosphor bronze alloy plated with 50 in of gold over 70-100 in of nickel IDC: 110 type, phosphor bronze alloy with 100- in 100% tin (Sn) alloy Applications: X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASE-T2, 1000BASE-T, 10GBASE-T, TR 4/16/100, 100BASE-VG, TM LAN 25/51/155, TP- PMD

CAT6 & CAT5E KEYSTONE JACKS CAT 6 180 DEG. KEYSTONE JACK HN6-KJ-880-BK HN6-KJ-880-BL HN6-KJ-880-RD HN6-KJ-880-WH HN6-KJ-880-GY CAT 6 180 DEG. KEYSTONE JACK T568A/B - BLACK CAT 6 180 DEG. KEYSTONE JACK T568A/B - BLUE CAT 6 180 DEG. KEYSTONE JACK T568A/B - RED CAT 6 180 DEG. KEYSTONE JACK T568A/B - WHITE CAT 6 180 DEG. KEYSTONE JACK T568A/B - GRAY Another Colors Are Also Available By Custom Orders CAT 5e 90 DEG. KEYSTONE JACK HN5E-KJ-880-BK HN5E-KJ-880-BL HN5E-KJ-880-RD HN5E-KJ-880-WH HN5E-KJ-880-GY CAT 5e 90 DEG. KEYSTONE JACK T568A/B - BLACK CAT 5e 90 DEG. KEYSTONE JACK T568A/B - BLUE CAT 5e 90 DEG. KEYSTONE JACK T568A/B - RED CAT 5e 90 DEG. KEYSTONE JACK T568A/B - WHITE CAT 5e 90 DEG. KEYSTONE JACK T568A/B - GRAY Different Colors Are Also Available By Custom Orders Howell Network keystone jack exceed all performance requirements as defined in TIA/EIA-568-B and provide a sound platform for supporting all today s network systems including Gigabit Ethernet. Jacks can be terminated with industry standard 110 termination tools and feature color coding for both T568A and T568 wiring. KEY FEATURES: Guaranteed to meet or exceed TIA-568-C.2 component performance. Supports TIA-568-C.2 category 6 & 5e 100-meter channel performance. Multi-purpose keystone design equally suitable as a work area outlet and a patch panel port. 90 and 180 high density compatible with all Howell keystone faceplates, surface mount boxes, and snap-in patch panels. Rear 110 type contacts provide improved wire retention and ease of termination. Rated for at least 750 plug insertions providing for the highest level of system reliability. Contact design provides enhanced plug-to-jack connection integrity and protects against damage caused by insertion of 4- or 6-position plugs. T568A and T568B wiring with an easy-to-read colorcode wiring label for maximum flexibility. Have an ability to mount either color-coded icon tabs for service identification or dust covers to protect unused jacks form dust and other contaminants. Terminated with standard single-position 110 or Howell four-pair termination tools.

CAT6A PATCH CORDS XG SERIES HN6A-SPC-02-XX HN6A-SPC-03-XX HN6A-SPC-05-XX HN6A-SPC-07-XX HN6A-SPC-10-XX HN6A-SPC-14-XX CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 2 Feet CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 3 Feet CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 5 Feet CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 7 Feet CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 10 Feet, BLUE CAT6A XG SERIES SHIELDED PATCH CORD, SNAGLESS MOLDED BOOT, 14 Feet AVAILABLE COLORS: RED (XX REPLACED BY RD); BLUE (XX REPLACED BY BL); GRAY (XX REPLACED BY GY); YELLOW (XX REPLACED BY YL; GREEN (XX REPLACED BY GR) Howell Network CAT6A patch cords ensure optimum channel performance. These cords accommodate both T568A and T568B wiring applications and are offered in five colors for easy circuit identification. Insert molded boots have a snag free feature that protects the modular connector while the slim profile boot allows for connection to the highest density equipment, verified stranded cable with 50 micro inches of gold plating on the Shielded RJ-45 plug contacts. KEY FEATURES: Transmission performance per TIA/EIA -568 -B.2-1 channel level performance specifications 100 % factory transmission tested to 4-connector channel level performance per TIA/EIA -568 -B.2 specifications. Contact design provides enhanced plug to jack connection integrity. T568A /B wiring scheme compatible. Rated for at least 750 plug insertions providing for the highest level of system reliability. Slim -profile snag -free boots with durable flexible cable strain relief. Maximum strength and durability construction. CONSTRUCTION: Conductor : Material bare copper, 23AWG/4P 0.57 mm Stranded Conductor (7*0.18mm #33AWG) Insulation: Material HDPE, Diameter 1.02 ± 0.02 mm Filler: Cross Slot 5.0 x 0,7mm Sheath: Material CM PVC, Thickness average: 0.50 mm (0.020 in), min at any point: 0.45 mm (0.018 in). RJ -45 Connector: CAT6A shielded 8P8C plug RJ45 24 to 26 AWG stranded 50 mic gold. Screen: POLYESTER MYLAR tape 0.023 mm (0.0009 in) thickness; WIRE DRAIN: Tinned copper 0.46 mm (0.018 in) diameter; ALUMINUM FOIL : PET tape 0.025 mm (0.0010 in) thickness

CATEGORY 6A PATCH CORDS HN6A-PC-02-XX HN6A-PC-03-XX HN6A-PC-05-XX HN6A-PC-07-XX HN6A-PC-10-XX HN6A-PC-14-XX CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 2 Feet CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 3 Feet CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 5 Feet CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 7 Feet CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 10 Feet CAT6A PATCH CORD, SNAGLESS MOLDED BOOT, 14 Feet AVAILABLE COLORS: RED (XX REPLACED BY RD); BLUE (XX REPLACED BY BL); GRAY (XX REPLACED BY GY); YELLOW (XX REPLACED BY YL; GREEN (XX REPLACED BY GR) Howell Network CAT6A patch cords ensure optimum channel performance. These cords accommodate both T568A and T568B wiring applications and are offered in five colors for easy circuit identification. Insert molded boots have a snag free feature that protects the modular connector while the slim profile boot allows for connection to the highest density equipment, verified stranded cable with 50 micro inches of gold plating on the Shielded RJ-45 plug contacts. KEY FEATURES: Transmission performance per TIA/EIA-568-B.2-1 channel level performance specifications. 100% factory transmission tested to 4-connector channel level performance per TIA/EIA-568-B.2 specifications. Contact design provides enhanced plug to jack connection integrity. T568A/B wiring scheme compatible. Rated for at least 750 plug insertions providing for the highest level of system reliability. Slim-profile snag-free boots with durable flexible cable strain relief. Maximum strength and durability construction. CONSTRUCTION: Conductor: Material bare copper, 23AWG/4P 0.57 mm Stranded Conductor (7*0.18mm #33AWG) Insulation: Material HDPE, Diameter 1.02 ± 0.02 mm Filler: Cross Slot 5.0 x 0,7mm Sheath: Material CM PVC, Thickness average: 0.50 mm (0.020 in), min at any point: 0.45 mm (0.018 in). CAT6 8P8C plug RJ45 24 to 26 AWG stranded 50 mic gold.

CAT6 & CAT5E PATCH CORDS HN6-PC-02-XX CAT6 PATCH CORD, SNAGLESS MOLDED BOOT, 2 Feet HN6-PC-02-XX CAT6 PATCH CORD, SNAGLESS MOLDED BOOT, 2 Feet HN6-PC-03-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 3 Feet HN6-PC-03-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 3 Feet HN6-PC-05-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 5 Feet HN6-PC-05-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 5 Feet HN6-PC-07-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 7 Feet HN6-PC-07-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 7 Feet HN6-PC-10-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 10 Feet HN6-PC-10-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 10 Feet HN6-PC-14-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 14 Feet HN6-PC-14-XX CAT6 PATCH CORD, MOLDED W/BOOT & BUBBLE, 14 Feet Available Colors: Red (XX Replaced By RD); Blue (XX Replaced By BL); Gray (XX Replaced By GY); Yellow (XX Replaced By YL); Green (XC Replaced By GR) Available Colors: Red (XX Replaced By RD); Blue (XX Replaced By BL); Gray (XX Replaced By GY); Yellow (XX Replaced By YL); Green (XC Replaced By GR) Howell Network CAT6 & CAT5e patch cords ensure optimum channel performance. These cords accommodate both T568A and T568B wiring applications and are offered in five colors for easy circuit identification. Insert molded boots have a snag free feature that protects the modular connector while the slim profile boot allows for connection to the highest density equipment, verified stranded cable with 50 micro inches of gold plating on the plug contacts. KEY FEATURES: Transmission performance per TIA/EIA-568-B.2-1 channel level performance specifications. 100% factory transmission tested to 4-connector channel level performance per TIA/EIA-568-B.2 specifications. Contact design provides enhanced plug to jack connection integrity. T568A/B wiring scheme compatible. Rated for at least 750 plug insertions providing for the highest level of system reliability. Slim-profile snag-free boots with durable flexible cable strain relief. Maximum strength and durability construction.

FACEPLATES & SURFACE MOUNT MULTIMEDIA Howell Network offers one of the broadest selections of field-configurable, flush-mount faceplates and multimedia surface-mount boxes. From single-gang faceplates to multimedia surface-mount multi-port boxes, Howell has the solutions to fit your needs. SINGLE -GANG FACEPLATES HWFP -B1 -WH 1 PORT KEYSTONE FACEPLATE BASIC - WHITE HWFP -B2 -WH 2 PORT KEYSTONE FACEPLATE BASIC - WHITE HWFP -B3 -WH 3 PORT KEYSTONE FACEPLATE BASIC - WHITE HWFP -B4 -WH 4 PORT KEYSTONE FACEPLATE BASIC - WHITE Single-gang faceplates are available in 1, 2, 3 and 4 port versions and allow mounting of keystonejacksand/ormultimedia modules. SINGLE -GANG FACEPLATES WITH LABELING HWFP -WI1 -WH 1 PORT KEYSTONE FACEPLATE W/ICON TABS WHITE HWFP -WI2 -WH 2 PORT KEYSTONE FACEPLATE W/ICON TABS WHITE HWFP -WI3 -WH 3 PORT KEYSTONE FACEPLATE W/ICON TABS WHITE HWFP -WI4 -WH 4 PORT KEYSTONE FACEPLATE W/ICON TABS WHITE Single-Gang Faceplates with Labeling are available in 1, 2, 3 and 4 port versions and allow mounting of keystone jacks and/or multimedia modules. These faceplates feature top and bottom designation labeling areas for convenient faceplate identification. SURFACE-MOUNT FACEPLATE BOX HNBO -4X2 -WH JUNCTION BOX 4X2 (For Wall Plates) - WHITE

25 L Howell Network is firmly committed to providing its customers with best in class-reliable products through authorized distributors and installers. Howell Network takes care of its customers by offering a full 25-year warranty on certified systems. The warranty reinforces the great quality of the cabling and connectivity systems, including connectors and plugs. Certified systems will in fact carry signals efficiently for twenty-five years and more. Howell Network warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty are: All Howell product lines. In the event of a performance problem, the customer should resolve all non-connectivity hardware, and non-cable related causes and contact the original Howell Network certified integrator to verify that the system has been maintained properly. Having a Howell Network certified system is simple; have your network system installed by a certified Howell Integrator. If a non-certified installer is chosen, a Howell representative could certify the system. Howell Network is not responsible for cable damage that is caused by user abuse or by the cable being used for what is not intended, such as an AC cord, jumper cable, or use as a rope. Howell provides full cross-referencing and technical support through its website or via its tech support department. *Conditions apply. Please refer to your local distributor for details For any cables found to be defective under the terms of this warranty, the corporation will repair or provide replacement cables. The limited warranty does not cover damage incurred during shipment, caused by impact with other objects, dropping, immersion in liquid; service by anyone other than Howell certified integrators use not in accordance with instructions, accident, abuse, misuse, natural disasters such as flood, fire, earthquake or lightning, power surges and problems caused by use of power supplies not supplied by us. Warranty coverage will not apply in the event that the serial number, or brand name has been removed, altered or defaced. The stated warranties and remedies are exclusive and in place of all other remedies and warranties, express or implied, including without limitation any implied warranties of merchantability or fitness for a particular purpose and excluding any liability for incidental or consequential damages or for any other liability beyond repair or replacement as provided above, in no event will Howell Network s liability exceed the purchase price paid to Howell Network corporation for the cables.

8725 NW 18th Terrace. Suite 201 Miami, FL. 33172 Ph: +1 (305) 718 4040