lumencove XT Specification Sheet Client Project name Order# Qty Type FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in,, or 4 sections Electro-statically applied polyester powder coat finish Aluminum end caps and silicone gaskets Stainless steel hardware Tempered glass lens IP66 IK07 rated Meets G ANSI C6. Vibration standard for bridge applications Corrosion-resistant coating for hostile environments* CERTIFICADO No.054, 055 RETILAP Performance : DMX/RDM Dynamic Warm variable color temperature: 00K, 700K, 000K Dynamic White variable color temperature: 700K, 4000K, 6500K Available in Regular Output ( LEDs/ft) or High Output (4 LEDs/ft) versions Lumen maintenance 00,000 hrs [L70 @ 5 C] Resolution per foot or per fixture (configured with LumenID V software & DMX/RDM) Operating temperatures: -5 C to 5 C [-F to F] -channel control Delivered Power 4ft, HO Output [lm] [W] Electrical : IK07 CCT* [K] DWW**,499 4,600 DWH**,74 4 4,000 Dim to Warm via DMX/RDM Single channel control (DMX/RDM) Line voltage luminaire for 00 to 77V Power and data in cable (#6-5) 5W/ft version Regular Output version (meets ASHRAE standards for linear lighting on building facades) W/ft version High Output version Dimming options: dim to warm via 0-0V (DWW only), DMX/RDM enabled dim to warm via single channel (DWW only) or DMX/RDM enabled -channel color temperature control DWW,09 4,700 4,700 Dim to Warm via 0-0V (DIM/DTW) DWW,77 *Tested at full output. **Estimated. Consult lumenpulse website for the latest ies files. ",5 ",7 ", 49 " [40mm, 645mm, 949mm, 54mm] KEEP MIN. DISTANCE BETWEEN FIXTURES " [mm] " [64mm] FRONT VIEW " 6 [56mm] 6" [406mm] Input Cable (no jumper cable needed) 4 "* [0mm] *" [5mm] on ft configuration SIDE VIEW " [9mm] MINIMUM COVE WIDTH * Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! /7 Copyright Lumenpulse 06 0/JN/06 75 Richardson, Suite 505 HK G6 N.Kassabian - Rev.5.77.97.00 P.54.97.00 F. 54.97.69 Consult
lumencove XT Specification Sheet MOUNTING OPTIONS Surface Mount " 4 [mm] " [mm] SAM Slim Adjustable Mounting R " [4mm] " [0mm] UMP Fixed Mounting Wall Mount " 6 [7mm] SAM /4 [9mm] / [0mm] UMAS Universal Adjustable Mounting " [0mm] /6 [5mm] / [9mm] 9 7/ [7mm] X 9/ THRU ALL UMP WAM Adjustable Wall Mounting " /4 [9mm] / [0mm] / [0mm] - / [64mm] 6 /4 [45mm] WAM6 Adjustable Extended Arm Mounting 6" X 9/ THRU ALL UMAS -6 6 / [0mm] /6 [7mm] WAM Adjustable Extended Arm Mounting " / [64mm] -6 X /4 THRU ALL /4 [45mm] 0 " 4" 7" 4 [5mm] [0mm] [7mm] /7 Copyright Lumenpulse 06 0/JN/06 75 Richardson, Suite 505 HK G6 N.Kassabian - Rev.5.77.97.00 P.54.97.00 F. 54.97.69 " [40mm] WAM Consult
ACCESSORIES Order separately Control Systems: Control Boxes: LTO LCU LID LTN CBX Lumentouch is a wall mount DMX 5 controller keypad. Lumencue is a USB / mini SD DMX 5 controller. LumenID is a diagnostic and addressing DMX 5 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 5 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Leader Cable : LXTLC Leader Cable for Lumencove XT. Please add desired cable length : 0, 5 or 50 [m, 7.6m or 5.m] standard lengths Sealing endcap is mandatory for any unused connector. () included with every leader cable Jumper Cable : LXTJC Jumper Cable for Lumencove XT. Please add desired cable length : or 4 [0.6m,.m] standard lengths /7 0/JN/06 N.Kassabian - Rev.5 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.69 Consult
RESOLUTION DETAILS Fixture resolution can be configured on-site within the LumenID V software. A DMX/RDM enabled CBX is required. Resolution per foot: each foot is addressed independently DMX ADDRESSES:,, (color ) 4, 5, 6 (color ) 7,, 9 (color ) 0,, (color 4), 4, 5 (color 5) 6, 7, (color 6) 9, 0, (color 7),, 4 (color ) LXT 4 inches LXT 4 inches Resolution per fixture: each fixture is addressed independently DMX ADDRESSES:,, (color ) 4, 5, 6 (color ) LXT 4 inches LXT 4 inches 4/7 0/JN/06 N.Kassabian - Rev.5 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.69 Consult
TYPICAL WIRING DIAGRAMS Dimming Version (DIM/DTW* - Dim to Warm via 0-0V) *Available for DWW version only, 700K to 00K Sealing end cap Dimmer Leader cable #6-5 0-0V JBOX From dimmer Data+ red Data-- orange Maximum run length, A maximum - Lumencove XT RO 5W/ft Cable length/voltage 0V 40V 77V 0ft leader cable 75ft 50ft 50ft 64ft 6ft 50ft Maximum run length, A maximum - Lumencove XT HO W/ft 0ft leader cable 75ft 5ft 76ft Notes: 7ft 47ft 7ft Maximum run length calculations are typically based on 4ft fixtures. Consult factory for specific applications. 00-77V To fixtures Junction box (by others) Line black Ground green Neutral white 5/7 0/JN/06 N.Kassabian - Rev.5 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.69 Consult
lumencove XT Specification Sheet TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM*, DMX/RDM) *Available for DWW version only, 700K to 00K Make sure that the addition of all cable lengths and fixture lengths for each run do not exceed the recommended limit. Sealing end cap Leader cable #6-5 Data Lumentouch.0 input Maximum run length, A maximum - Lumencove XT RO 5W/ft Cable length/voltage 0V 40V 77V 0ft leader cable Maximum run length, A maximum - Lumencove CBX-ST 00-77V Data input 00-40V XT HO W/ft 0ft leader cable 75ft 7ft Notes: Maximum run length calculations are typically based on 4ft fixtures and up to DMX/RDM enabled fixtures per DMX/RDM run. Consult factory for specific applications. DMX/RDM control option requires DMX address. DMX/RDM control option requires DMX addresses. Daisy Chain Layout (DMX/RDM*, DMX/RDM) *Available for DWW version only, 700K to 00K Lumentouch.0 00-40V CBX-DS 00-77V Data input Leader cable #6-5 Sealing end cap CBX-DS Leader cable #6-5 6/7 Copyright Lumenpulse 06 0/JN/06 75 Richardson, Suite 505 HK G6 N.Kassabian - Rev.5.77.97.00 P.54.97.00 F. 54.97.69 00-77V Data input Consult
HOW TO ORDER LXT 4 5 6 7 6 Housing: Finish: LXT RO - Lumencove XT Regular Output 5W/ft (ASHRAE compliant) LXT HO - Lumencove XT High Output W/ft Voltage: 00-00 volts 0-0 volts 0-0 volts Length: 0-0 volts 40-40 volts 77-77 volts 7 BK - Black Sandtex SI - Silver Sandtex WH - Smooth white CC - Custom color and finish (please specify RAL color) Control: DIM/DTW - Dim to Warm via 0-0V, 700K to 00K, 4 DMX/RDM - Dim to Warm via single-channel DMX/RDM, 700K to 00K, 5 DMX/RDM - -channel color temperature control via DMX/RDM 6 4 - / inches (40mm) (.4 kg/ lbs) 4-5 / inches (645mm) (. kg/4.6 lbs) 6-7 / inches (949mm) (.0 kg/7. lbs) 4-49 / inches (54mm) (4.0 kg/9 lbs) Option: CRC - Corrosion-resistant Coating GV - G ANSI C6. Vibration Rating 7 Colors and Color temperatures: DWW - Dynamic warm white color temperature ranging from 00K to 000K. DWH - Dynamic white color temperature ranging from 700K to 6500K. 5 Mounting Option: SAM - Slim Adjustable Mounting UMP - Fixed Mounting UMAS - Universal Adjustable Mounting WAM - Adjustable Wall Mounting WAM6 - Adjustable Extended Arm Mounting 6 WAM - Adjustable Extended Arm Mounting Notes: Suitable to use when GV option is specified. North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary. For more information about Lumenpulse s Dim to Warm technology consult the application note and the brochure on the Lumenpulse website. 4 0% minimum dimming value. Available for DWW version only. 5 % minimum dimming value. Available for DWW version only. DMX address per fixture. 6 Fixtures set to by fixture resolution. DMX addresses per fixture. 7 Available with UMP and UMAS mounting options only. 7/7 0/JN/06 N.Kassabian - Rev.5 Copyright Lumenpulse 06 75 Richardson, Suite 505 HK G6.77.97.00 P.54.97.00 F. 54.97.69 Consult