Bus Cables & Industrial Ethernet Cables

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com Bus Cables & Industrial Ethernet Cables 5 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com Bus Cables & Industrial Ethernet Cables UNITRONIC DeviceNet TM BUS Cables UL/CSA 54 Paired Communication and Control Cables UNITRONIC Genius TM BUS Cables UL 55 Shielded Twisted Pair Cable used in the Genius Bus System UNITRONIC Flexible Interbus TM BUS Cables 56 Signal and Control Cable used in the Manufacturing and Process Industries UNITRONIC Flexing Interbus TM BUS Cables 57 Signal and Control Cable used in the Manufacturing and Process Industries UNITRONIC BUS Cables UL/CSA 58 Transmission Cables for the Manufacturing Process Level UNITRONIC BUS Cables for PROFIBUS UL/CSA 59 Industrial Grade cables according to the PROFIBUS Organization for Flexible & Continuous Flex applications UNITRONIC BUS Cables for PROFIBUS UL/CSA 60 Industrial Grade cables according to the PROFIBUS Organization for Continuous Flex Applications in Hazardous and Intrinsically Safe Areas UNITRONIC EtherLine FD P Cat.5 Plus 6 Industrial Grade ETHERNET cables for Continuous Flex Applications UNITRONIC BUS CAN CABLES UL/CSA 6 Stationary and Continuous Flex Cables for CAN Applications UNITRONIC Mitsubishi CCL TM BUS Cables 63 Transmission Cables for the Manufacturing Process Level BlueFlex TM UL 64 Super Flexible Twinaxial Cable OLFLEX BUS (ASI) TM (Actuator-Sensor-Interface) UL/CSA 65 and Cable used in Plant Automation phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 53

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC DeviceNet BUS Cables Paired Communication and Control Cables UNITRONIC DeviceNet bus cables are used in the DeviceNet system to connect on-line bus system components. Two versions of thick (trunk) and thin (drop) are offered. These cables have flexible or flexing (UL) characteristics, which makes them easy to install, in addition to being resistant to vibration fatigue. All cables contain one data pair and one power pair. UNITRONIC DeviceNet BUS Cables Construction: Stranded tinned copper conductors; data conductors are insulated with foam polyethylene; power conductors are insulated with PVC; both pairs are foil shielded, plus have an overall foil wrap; both pairs utilize a common drain wire and have a tinned copper braid; oil resistant PVC outer jacket. DeviceNet is a registered trademark of the Open DeviceNet Vendor Association. Lapp is a member of the Open DeviceNet Vendor Association. 03 for installation: for continuous flex: for flexible use: 7.5 x cable diameter 5 X cable diameter 0 o C to +75 o C -0 o C to +75 o C 300V Color Code: 500 V pair: Red & Black pair: Blue & White * PLTC approved part numbers have a violet outer jacket Flexible 40 40 7034 70343 Continuous Flex 60 Trunk 60 70346 70347 Trunk Drop Trunk Drop Drop Trunk Drop of Pair AWG Size 8 AWG 5 AWG 4 AWG AWG 8 AWG 5 AWG 4 AWG AWG 8 AWG 5 AWG 4 AWG AWG 8 AWG 5 AWG 4 AWG AWG.476.7.480.7.476.7.480.7. 6.9. 6.9. 6.9. 6.9 40 43 9 45 40 43 3 47 09 64 9 67 09 64 95 70 Approvals UL/CSA UL/CSA UL/CSA (CMG)/ UL PLTC UL/CSA (CMG)/ UL PLTC UL/CSA UL/CSA UL/CSA (CMG)/ UL PLTC UL/CSA (CMG)/ UL PLTC DeviceNet is a registered trademark of the Open DeviceNet Vendor Association. Lapp is a member of the Open DeviceNet Vendor Association. 54 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC Genius BUS Cable Shielded Twisted Pair Cable used in the Genius Bus System The UNITRONIC Genius BUS cable was specially designed to interconnect devices within the Genius distributed I/O system. This bus system was developed to move the programming functions from a designated control room out to the factory floor. By utilizing the UNITRONIC Genius TM BUS cable, devices are able to be wired directly to the I/O block. Due to the flexing characteristic of the UNITRONIC Genius TM BUS cable, installation costs and down time is significantly reduced. The cable is frequently used in applications within the steel, food processing, and automotive industries. UNITRONIC Genius BUS Cables Construction: Finely stranded bare copper conductors; electronic grade flexible thermoplastic insulation; paired conductors; overall tinned copper shield; flame retardant violet polyurethane jacket. CF- for flexible use: 0 x cable diameter -0 o C to +80 o C -40 o C to +80 o C 300V 3000V Z Nominal Capacitance: Cond/ Cond: Cond/ Shield: Impedance: Color Code: Approvals: 4pF/ft 5pf/ft 00Ω White & Brown UL-AWM 964 of AWG Size Application AWG (0.34 mm ) Flexing.58 6.6 39 58 Genius is a registered trademark of GE Fanuc Automation. phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 55

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC Flexible Interbus BUS Cable Signal and Control Cables used in the Manufacturing and Process Industries UNITRONIC Interbus BUS cables are designed for today s high speed control requirements. They function as communication vehicles between control level devices; such as PLCs and numerous lower level devices, sensors and actuators. The cables deliver precise data transmissions required in today s demanding manufacturing and process environments. Our advanced designs provide excellent protection from EMI emissions. Lapp supplies flexible, flexing, and outdoor cable types, which are certified to Interbus conformance requirements. UNITRONIC Interbus BUS Cables Construction: Flexible Versions- includes outdoor cables Stranded bare copper conductors; polyolefin insulation; conductors paired; tinned copper braid; flame retardant polyurethane and PVC jacketed variations available. installation: 8 x cable diameter -40 o C to +80 o C Z Nominal Capacitance: Cond/ Cond: Cond/ Shield: Impedance: 8pF/ft 3pf/ft 00Ω 50V Transmission rate: Mbit/sec. 500V Color Code: DIN 4700, Chart 7, Page 674 7/3c: Red, Blue, Green/Yellow 708 70807 7087 930 709 Conductor 4/3pr + 7/3c 4/3pr + 7/3c 4/3pr 4/3pr 4/3pr Bus P Combi IBS Bus Yv Combi IBS- UL/CSA Bus Yv IBS- UL/CSA Bus IBS Bus IBS- UL/CSA Application Flexible Flexible UV Res. Flexible UV Res. Flexible Flexible Jacket Color Violet Black Black Green Violet.3.370.366.83.83 7.9 9.4 9.3 7. 7. 57 86 63 48 48 85 8 94 7 7 Key to description terms: P = Polyurethane outer jacket Combi = Remote installation cable for Interbus (bus cable & power supply) IBS = Remote bus cable for Interbus Yv = Reinforced PVC outer jacket Interbus is a registered trademark of Phoenix Contact. Lapp is a member of the INTERBUS Club. 56 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC Flexing Interbus BUS Cable Signal and Control Cables used in the Manufacturing and Process Industries UNITRONIC Interbus BUS cables are designed for today s high speed control requirements. They function as communication vehicles between control level devices, such as PLCs and numerous lower level devices, sensors and actuators. The cables deliver precise data transmissions required in today s demanding manufacturing and process environments. Our advanced designs provide excellent protection from EMI emissions. Lapp supplies flexible, flexing, and outdoor cable types, which are certified to Interbus conformance requirements. UNITRONIC Interbus BUS Cables Construction: Flexing Versions Finely stranded bare copper conductors; TPE insulation; conductors paired; non-wicking wrap; tinned copper braid; flame retardant polyurethane jacket. CF- 5 x cable diameter -30 o C to +70 o C 50V 500V Z Nominal Capacitance: Cond/ Cond: Cond/ Shield: Impedance: Transmission rate: 8pF/ft 3pf/ft 00Ω Mbit/sec. Color Code: DIN 4700, Chart 7, Page 674 7/3c: Red, Blue, Green/Yellow 984 78 76 7088 Conductor 4/3pr 4/3pr + 7/3c 4/3pr 4/3pr + 7/3c Bus FD P IBS Bus FD P Combi IBS Bus FP P IBS- UL/CSA Bus FD P Combi IBS- UL/CSA Application Flexing Flexing Flexing Flexing Jacket Color Green Violet Violet Violet.3.3.3.3 7.9 7.9 7.9 7.9 43 6 43 6 64 9 64 9 Key to description terms: P = Polyurethane outer jacket IBS = Remote bus cable for Interbus Combi = Remote installation cable for Interbus (bus cable & power supply) Interbus is a registered trademark of Phoenix Contact. Lapp is a member of the INTERBUS Club. phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 57

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC BUS Cables Transmission Cables for the Manufacturing Process Level UNITRONIC BUS cables connect digital field devices at the sensor/actuator level to higher level components. Special materials and manufacturing techniques of Lapp provide excellent data transmission characteristics (UL) and protection from EMI emissions. Lapp offers flexible, flexing, and continuous flex versions. Available with UL/CSA Approval. UNITRONIC BUS Cables Construction: Flexible Versions Stranded bare copper conductors; electronic grade flexible polyethylene insulation; paired conductors; tinned copper shield; flame retardant violet PVC jacket. UNITRONIC BUS Cables Construction: Continuous Flexing Versions Finely stranded bare copper conductors; electronic grade flexible polyethylene insulation; paired conductors; non-wicking tape wrap; tinned copper shield; flame retardant violet polyurethane jacket. CF- 8 x cable diameter 5 x cable diameter Nominal Capacitance: Cond/ Cond: Cond/ Shield: 8pF/ft 3pf/ft -40 o C to +75 o C -30 o C to +70 o C Z Impedance: Transmission rate: 00Ω Mbit/sec. 50V Color Code: DIN 4700, Chart 7, Page 674 500V Approvals: UL-Type CMX CSA-Type CMX Flexible 703 704 7 70803 70804 708 Continuous Flex 73 74 75 7083 7084 7085 UNITRONIC BUS LD UNITRONIC BUS LD UNITRONIC BUS LD UNITRONIC BUS LD UL/CSA UNITRONIC BUS LD UL/CSA UNITRONIC BUS LD UL/CSA UNITRONIC FD P LD UNITRONIC FD P LD UNITRONIC FD P LD UNITRONIC FD P LD UL/CSA UNITRONIC FD P LD UL/CSA UNITRONIC FD P LD UL/CSA Conductor 4/ pr 4/ pr 4/ 3pr 4/ pr 4/ pr 4/ 3pr 4/ pr 4/ pr 4/ 3pr 4/ pr 4/ pr 4/ 3pr Key to description terms: LD = Low capacitance P = Polyurethane outer jacket.5.80.83.3.87.9.48.33.343.56.339.343 5.7 7. 7. 5.9 7.3 7.4 6.3 8.4 8.7 6.5 8.6 8.7 5 30 48 6 3 5 6 44 5 6 44 5 37 45 7 39 48 76 39 65 77 39 65 77 58 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC BUS Cables for PROFIBUS Industrial Grade cables according to the PROFIBUS Organization for flexible & Continuous Flex Applications, also in a Fast Connect version UNITRONIC BUS L/FIP and UNITRONIC BUS FD P L/FIP are a series of data cables for use in FIP (Factory Instrumentation Protocol) field bus systems, as well as other high performance data networks. They are specially designed with a foil and a tinned copper braided shield to provide excellent protection against EMI interference. UNITRONIC BUS L/FIP - Stationary Cables These cables have an oil resistant and flame retardant violet PVC or PUR outer jacket. Within the series there are individual characteristics, which offer extra features customized to your needs. Please see below for more information. UNITRONIC BUS L/FIP (P/N 70 & P/N 79) is built with two single conductors of bare copper along with fillers. This cable is suitable for interfaces RS4 and RS485. P/N 79 is UL/CSA approved. UNITRONIC BUS L/FIP 7-wire (P/N 74) is a 7-wire stranded cable, which is designed for limited flexible use. UNITRONIC BUS L/FIP FC with UL/CSA (P/N 7080) is built with two single conductors of bare copper surrounded by a plastic tape to allow for fast connection to an IDC (Insulation Displacement Connection) connector. It is UL/CSA (CMX) approved. UNITRONIC BUS FD L/FIP - Continuous Flex Cables UNITRONIC BUS L/FIP H FC with UL/CSA (P/N 7036) is built with two single conductors of bare copper surrounded by a plastic tape to allow for fast connectionto an IDC (Insulation Displacement Connection) connector. This cable has a Halogen Free Jacket. It is UL/CSA (CM) approved. UNITRONIC BUS L/FIP PUR FC with UL/CSA (P/N 70330) is built with two single conductors of bare copper surrounded by a plastic tape to allow for fast connectionto an IDC (Insulation Displacement Connection) connector. This cable has a PUR jacket. It is UL/CSA (CMX)approved. UNITRONIC BUS FD P L/FIP (P/N 7) is built for continuous flex applications. Its oil resistant and flame retardant, PUR jacket allows it to be used in demanding industrial applications. Pair Flexible (0.64 mm ) 70 79 74 7080 7036 70330 BUS L/FIP BUS L/FIP * BUS L/FIP 7-Wire BUS L/FIP FC * BUS L/FIP-H FC * BUS L/FIP-PUR FC * Continuous Flex (0.64 mm ) 7 BUS FD P L/FIP 703 BUS FD P L/FIP FC * * UL/CSA FC= Fast Connect Operating Volts 50 50 50 50 50 50 50 50 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 UNITRONIC BUS FD P L/FIP FC with UL/CSA (P/N 703) is a continuous flex cable built with two single conductors of bare copper surrounded by a plastic tape to allow for fast connection to an IDC connector. This cable has an oil resistant and flame retardant PUR jacket which allows it to be used in demanding industrial applications. It is UL/CSA (CMX) approved. Jacket PVC PVC PVC PVC Halogen Free PUR PUR PUR.307.35.307.35.35.35.35.35 7.8 7.8 Mutual Capacitance pf/ft pf/m 8.5 8.5 9. 8.7 8.7 8.7 9. 8.5 30 30 8 8.5 8.5 8.5 30 8 CF- Impedance Ohms 50 50 50 50 50 50 50 50 Temperature 70 O C 75 O C 70 O C 75 O C 75 O C 75 O C 70 O C 85 O C 59

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC BUS Cables for PROFIBUS Industrial Grade cables built according to the PROFIBUS Organization for Continuous Flex Applications in Hazardous and Intrinsically Safe Areas UNITRONIC BUS PA - is specially designed for use in hazardous and intrinsically safe areas. The PA series allows for the transmission of both data communication and power supply through one BUS cable. These cables are also designed with the Fast Connect technology to offer a quick connection of an IDC connector (Insulation UNITRONIC BUS PA FC with UL/CSA (P/N 70334)- Blue PVC jacket for use in intrinsically safe areas Displacement Connection). They are built with two single insulated cores of bare copper, surrounded by a foil and a tinned copper braided shield to provide excellent protection against EMI interference. These cables have an oil resistant and flame retardant PVC outer jacket with UL/CSA (CMX) approvals. UNITRONIC BUS PA FC with UL/CSA (P/N 70335)- Black PVC jacket for standard use. CF- 8 AWG (.00 mm ) 70334 70335 BUS PA FC Blue BUS PA FC Black Operating Volts 50 50 Jacket PVC PVC.35.35 Mutual Capacitance pf/ft pf/m 5. 5. 50 50 Impedance Ohms 00 00 Temperature 60 O C 60 O C ERbic PROFIBUS IDC connectors allow quick and easy connection when using solid conductor PROFIBUS cable. These connectors eliminate having to strip the insulation of each conductor and there is no extra tooling needed to operate the IDC (Insulation Displacement Connection) terminal block. The PROFIBUS IDC connector includes an integrated switch that offers a flexible system design and easy system extension. ERbic PROFIBUS IDC Connector Standard or/ with D Sub Horizontal cable outlet ERbic MAX PROFIBUS IDC Connector Straight metal design with an axial cable outlet D Sub Profibus Connector with LED Lights *Erbic is are registered trademark of ERN/ Elecktroapparte GmbH 40 4 44 4009 IDC Switch IDC Switch with D Sub IDC Switch- Straight D Sub with LED Lights Color Gray Gray Metal Metal Cable Exit Horizontal Horizontal Axial Horizontal 60 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC EtherLine FD P Cat.5 Plus Industrial Grade ETHERNET cable for Continuous Flex Applications UNITRONIC EtherLine Cat.5 Plus (continuous flex) is a halogen free, fine stranded, oil resistant PUR cable designed for continuous flex applications. The specially designed Internal Conductor Wrap ensures proper cable performance during flex motion. The cable meets standard EIA/TIA-568; TSB-36 & ISO/IEC 8 Generic Cabling for Customer Premises for class D links. The UNITRONIC EtherLine FD P Cat. 5 Plus is available in a two and four pair version. UNITRONIC EtherLine FD P Cat.5 Pair Construction: Finely stranded bare copper conductors, foam-skin insulation, pair conductors, halogen free inner conductor wrap (NA only), tinned copper braid shield, halogen free flame retardant PUR jacket. UNITRONIC EtherLine FD P Cat.5 4 Pair Construction: Finely stranded bare copper conductors, foam-skin insulation, pair conductors, halogen free inner conductor wrap (NA only) tinned copper braid shield, halogen free flame retardant PUR jacket. CF- 03 5 x cable diameter.5 x cable diameter -40 o C to +50 o C -5 o C to +50 o C Z Impedance: 00Ω, +/- 5% @-00 MHz Color Code: P/N 789 white/green-green white/orange-orange P/N 789NA white/blue-blue white/orange-orange Operating Voltage: 5V peak/ Not for power purposes P/N 70489 & P/N 70489NA white/blue-blue white/orange-orange white/green-green white/brown-brown Approvals: EIA/TIA-568; TSB-36 ISO/IEC 8 789 (9/38) 789NA (9/38) 70489 (9/38) 70489NA (9/38) For continuous flex * For continuous flex * For continuous flex * For continuous flex * AWG / 6/pr 6/pr 6/4pr 6/4pr.8.8.48.48 5.8 5.8 6.3 6.3 3 3 34 34 48 48 54 54 Put-ups NA 38 or 000 ft NA 38 or 000 ft Product testing is.5 million flex motions and still going. During the cable track testing, the cable maintains it s electrical properties and mechanical integrity. *Special Note for Continuous Flex Cables: The electrical properties can only be achieved by foam insulation. Do not exceed the recommended bend radius or excessive speeds (0 ft/sec) for flexing applications. Cat.5 Plus = Cat.5e phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 6

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC BUS CAN Cables Stationary and Continuous Flex Cables for CAN Applications UNITRONIC BUS CAN cables are UL/CSA type CMX approved for CAN (Controller Area Network) field bus systems. These cables conform to the CAN standard according to ISO 898 and are for use on high performance data networks with 0 Ohms nominal impedance. The UNITRONIC BUS FD P CAN UL/CSA is for use in continuous flex applications in dry or damp indoor areas, as well as in harsh industrial environments. UNITRONIC BUS CAN UL/CSA Construction: UNITRONIC BUS CAN UL/CSA is a 7-wire stranded twisted pair data cable, polyethylene insulation. The conductors are surrounded with a foil wrap and a tinned copper braid shield, violet jacket is PVC. UNITRONIC BUS FD P CAN UL/CSA Construction: UNITRONIC BUS FD P CAN UL/CSA is a finely stranded twisted pair data cable, polyethylene insulation. The conductors are surrounded with a non-wicking textile wrap and a tinned copper braid shield, violet halogen free PUR jacket. for continuous flexings: 8 x cable diameter 5 x cable diameter Mutual Capacitance: 500V max. 40 nf/km for continuous flexings: -40 o C to +75 o C -30 o C to +70 o C 50V Color Code: DIN 4700, Chart 7, Page 674 Approvals: UL-Type CMX CSA-Type CMX UNITRONIC BUS CAN UL/CSA 4 AWG (0.5 mm ) 760 76 AWG (0.34 mm ) 763 764 of.4.99.68.335 5.7 7.6 6.8 8.5 UNITRONIC BUS FD P CAN UL/CSA 8 46 37 59 4 68 55 88 0 AWG (0.50 mm ) 766 767 9 AWG (0.75 mm ) 769 770 of.95.38.343.453 7.5 9.7 8.7.5 60 7 73 95 90 06 08 4 4 AWG (0.5 mm ) 77 773 AWG (0.34 mm ) 775 776 of.5.33.68.378 6.4 8.4 6.8 9.6 7 47 40 59 40 70 60 88 0 AWG (0.50 mm ) 778 779 of.35.45 0.8 50 67 74 00 6 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC Mitsubishi CCL Bus Cables Transmission Cables for the Manufacturing Process Level UNITRONIC CCL bus cables connect digital field devices at the sensor/actuator level to higher level components. Special materials and manufacturing techniques of UNITRONIC cables provide excellent transmission characteristics and protection from EMI emissions. Lapp offers a flexible, and continuous flex version. UNITRONIC Mitsubishi CCL Bus Cables Construction: Stranded bare copper conductors; electronic grade flexible polyethylene insulation; paired conductors; non-wicking tape wrap; tinned copper shield; flame retardant violet polyurethane jacket. UNITRONIC Mitsubishi CCL Bus Cables Construction: Finely stranded bare copper conductors; electronic grade flexible polyethylene insulation; paired conductors; shielding tape and tinned copper shield; flame retardant violet polyurethane jacket. 8 x cable diameter 5 x cable diameter Nominal Capacitance: Cond/ Cond: Cond/ Shield: 8pF/ft 3pf/ft -30 o C to +70 o C Z Impedance: 00Ω 50V Transmission rate: Mbit/sec. 500V Color Code: DIN 4700, Chart 7, Page 674 Stationary 704 Flexing 74 of Mitsubishi CCL Mitsubishi CCL AWG Size AWG 4 AWG 4.33.80 8.4 7. 44 30 65 45 * Mitsubishi CCL is a registered trademark of Mitsubishi Corporation. phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 63

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com BlueFlex Super Flexible Twinaxial Cable BlueFlex is a shielded continuous flex, twinaxial, data transmission cable. The compact design permits a tight bend radius and superior flexibility, which results in easier handling and installation. Special materials and manufacturing techniques provide transmission of data free of EMI interference. This data highway cable is designed for use on PLC controlled automated equipment where accurate data transmission is required in high speed applications. Because of its unique construction, this cable is well suited for harsh environments. BlueFlex TM is fully compatible in all applications where traditional blue jacketed twinaxial cables are utilized. Recommended applications include I/O, sensors, actuators, transducers, pick and place units, robots, automated handling equipment, conveyor systems, bottling and packaging equipment, food processing equipment, and machine tools which are typically found in today s automated factory. BlueFlex Construction: Finely stranded tinned copper conductors; electronic grade flexible thermoplastic insulation; overall tape shield; flexible tinned copper shield (85%); specially formulated flame and oil resistant blue PVC jacket. CF- x cable diameter -0 o C to +80 o C Nominal Capacitance: 8pF/ft Nominal velocity of propagation: 69% 300V Color Code: Blue, Natural 3000V Approvals: UL-AWM 3649FD of Size AWG mm Application 0 0.50 Flexing.48 6.3 33 50 64 phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939

Order from MARYLAND METRICS P.O. Box 6 Owings Mills, MD 7 USA email: sales@mdmetric.com web: http://mdmetric.com UNITRONIC BUS (ASI) (Actuator-Sensor- Interface) and Control Cables Used in Plant Automation UNITRONIC BUS ASI bus cables are specially designed for use in low levels of plant automation, where simple field devices such as contactors and switches need to interface in an automation network that is controlled by a PLC or PC. and power are transmitted between the control unit and lower level devices by means of this flat, rectangular shaped cable, which contains two conductors. The cable can be installed in equipment such as push buttons and sensors without using connectors, which equates to substantial cost savings. Insulation displacement connectors are utilized to inter-connect I/Os, and clamp down over the cable for ease of installation. The I/O can be moved anywhere along the cable to easily accommodate a change in the automation line. This makes job planning simpler because specific cable length is no longer a concern. The TPE jacket version is UL/CSA approved making it appropriate for applications that involve oils and freezing lubricants mixed with water. The UNITRONIC BUS ASI cable is flexible, easy to install, operate, maintain, plus simple to reconfigure. The cable jacket is available in yellow or black. UNITRONIC BUS (ASI) Cables Construction: TPE Jacket Finely stranded bare copper conductors; oil resistant Thermoplastic Elastomer outer jacket. UNITRONIC BUS (ASI) Cables Construction: EPDM Rubber Jacket Finely stranded bare copper conductors; oil resistant, EPDM (rubber) outer jacket. 03 04 SKINTOP DIX ASI-M (Page 570) is a special SKINTOP bushing which can be used in a standard SKINTOP to adapt for the ASI Bus Cables. 04 3 x cable diameter Nominal Capacitance: Cond/ Cond: 9pF/ft -40 o C to +70 o C Z Impedance: 80Ω 300V Color Code: Blue & Brown 500V Approvals: 70830 & 7083: UL/CSA 70830 7083 78 79 of Conductors Conductor Size AWG mm 6 6 6 6.50.50.50.50 Application & Transmission * Auxiliary Trans. 4 V DC * & Transmission Auxiliary Trans. 4 V DC Jacket Color Yellow Black Yellow Black Jacket Material TPE TPE EPDM (rubber) EPDM (rubber) 38 38 38 38 57 57 57 57 * UL/CSA AS-I is a registered trademark of AS International. Lapp Group is a member of the AS-International Association. phones: (40)358-330 (800)638-830 faxes: (40)358-34 (800)87-939 65