TFT-LCD COLOUR TV Owner s Manual TFT-LCD TV High Brightness & Contrast NICAM/A2 Stereo Sound Please read this manual carefully before using your television and keep this manual in a good place for future reference. MODEL: L15SV6-A0, L17LV6-A1,L20AV6-A0 L17L6A-G1,L20L6A
Contents Warning 2 Front control panel 4 Back cover interface 5 Loading battery 6 7 Functions of remote controller 8 Operation instructions 10 Screen display 11 Programme setup 13 Sound system & Video system set up 14 Picture control 15 Picture Control P.MODE 15 Sound Control Set the Equalizer User 16 Sound Control S.MODE (Sound Status Mode) 16 Others 17 External audio and video device connections 18 Connected to PC as a monitor 19 Specifications 20 Troubleshooting 21 English-1
WARNING WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock, is present within the cabinet of this unit. ATTENTION The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual. Warning To avoid fire or electric hazards, never place your television receiver in an area with heavy moisture. Attention should be paid to avoid accidental scratches or impacts onto the LCD screen.the function of sound may be lost and the function of picture may bedisordered in electrostatic discharge, they can be restored by operation of the controls. Caution Unauthorized disassembly of this product is prohibited. Power supply This product requires DC power supply which is switched by a AC-DC converter. The voltage value is as per the information specified on the rating label, which is fixed on the back of the television set. The product will never be supplied with AC power source. The information of AC-DC voltage is stated on the converter casing. English-2
WARNING Power source connection 1 Plug the 12V AC-DC converter to the 12V input jack of the television set. 2 Correctly connect the AC wire to the AC-DC converter. 3 Insert the AC wire plug in the jack of AC power source. Disconnect the television set with the power source or antenna plug when it heavily rains with thunderstorm or power supply is interrupted. Do not tie electric cables to any other objects to avoid accident damages. Application area Do not expose the television set directly to floodlight, sunlight, heavy humidity, high temperature or thick dusts. Locate the television set in a well-ventilated area, away from vibration and blockage of ventilation port on the television rear side. Cleaning Unplug the television set when the LCD screen is to be cleaned. Use soft fabrics for cleaning the screen and electric cables. If necessary, a piece of wet but clean soft cloth can be used for cleaning the screen, but never use any liquid or spray detergent. English-3
FRONT CONTROL PANEL 1 2 3 4 5 7 6 8 9 7 6 5 1 2 6 3 4 1 3 5 7 2 4 6 7 MENU PR VOL TV/AV 3 2 4 Note: The silk-screen or the array may be change without notice. 1 2 MENU V- V+ Display the menu. ( volume down /up button) 3 Adjust the volume or change the menu set. P- P+ (programme number down/ up button) Select a channel or select an option in the menu. 4 TV/AV To exchange between TV and other available video inputs 5 Power Turns the TV set on/off. 6 Power Indicator When the main power is turned on, the indicator is on. 7 Remote Sensor 8 Receiving remote controller sends the infrared remote signal. Video video input terminal. 9 Audio audio input terminal. English-4
BACK COVER INTERFACE 9 8 7 6 5 4 3 2 1 DC IN D-SUB IN HEADPHONE PC AUDIO IN SCART S-VIDEO AUDIO VIDEO ANT 1 Antenna input 3 External audio input 5 SCART input 2 External video input 4 S terminal input 6 Computer audio input 7 Headphone output slot 9 12V power input 8 Computer/digital TV signal input English-5
LOADING BATTERY Loading a battery to the compartment 1 Remove the cover of battery compartment as shown in the figure. 2 Properly load one 3V Li-Battery in the compartment of the remote controller. 3 Replace the cover of the battery compartment. Cautions 1 Ensure that there is no obstacle to signals from the remote controller to the receiving sensor of the television set. 2 Keep the remote controller away from heat source or high moisture and avoid impacts to the remote controller. 3 Do not operate the remote controller directly in floodlight or strong sunlight. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. English-6
FUNCTIONS OF REMOTE CONTROLLER DC standby DISPLAY To display the SLEEP TIME,press the VOL+/- buttons to set the sleep time A2 stereo/nicam selection Digital bass selection Autoadjust the display to match the TV screen in PC mode) To make sure the selection Adjusts volume, reset menu or enter submenu To call the main menu POWER DISPLAY SLEEP NICAM DIGITAL BASS OK 1 4 7 AD CH+ MENU 2 5 8 0 Q.VIEW VOL+ MUTE 3 6 9 TV/AV PC DVD P.MODE CH- S.MODE ARC Press to conceal the sound of programme Channel direct selection To exchange between TV and other available video inputs Option of computer input Programme quick review To select programme or menu item Option of picture mode Option of DVD input Option of sound mode The ARC function is not available except L17LV6-A1 and L17L6A-G1 (Press this key, the present size will be on the screen. Then use VOL +/- to adjust the picture size between Fill all and 4:3) English-7
OPERATION INSTRUCTIONS Turning the TV On and Off Standby Setup: The AC-DC converter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the power button on the front panel of the TV to go into standby mode. 1 If the TV is in standby mode, press the Power button on the remote controller to turn on the TV Set. POWER 2 Press the Power button and the TV goes into standby mode. Note : If the TV is on and the power button on the remote controller is pressed to turn the TV off, the TV goes into standby mode. Programme selection CH+ 1 You can select a channel with the CH-/+ or the NUMBER button. 1 4 2 3 5 6 7 8 9 Volume adjustment 0 1 Press the VOL-/+ buttons to adjust the volume. VOL+ CH- VOL- Quick view 1 Press the Q.VIEW button to view the last programme you were watching. Q.VIEW English-8
OPERATION INSTRUCTIONS Mute function MUTE 1 Press the MUTE button then the sound will be switched off and the display appears. 2 You can cancel it by pressing the MUTE again. On screen language selection OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME English DK Auto 0 min/0 min The menu can be displayed on the screen in desired language. First select your language. 1 Press the MENU button. 2 Select the third menu. 3 Press CH- button to enter the Menu then press CH-/+ buttons to select LANGUAGE. 4 Press the VOL+ button to select desired language. English-9
SCREEN DISPLAY How to select the item you want to adjust. 1 Press the MENU button and the main menu will appear on the screen. PICTURE MENU BRIGHTNESS CONTRAST SHARPNESS COLOR 2 Press VOL+/- buttons to select PICTURE, SOUND,OPTIONS or TUNER Menu. 3 Press CH- button to enter the Menu then press CH-/+ buttons to select the item. SOUND MENU 4 Press VOL+/- buttons to adjust Menu items or enter a submenu. 5 Press MENU or OK button to exit. DIGITAL BASS AVC BALANCE EQUAUZER OPTIONS MENU OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME English DK Auto 0 min/0 min TUNER MENU ATM MANUAL STORE FINE TUNE ADD/ERASE CURRENT CHANNEL 2 English-10
PROGRAMME SETUP Setting up TV programme CH+ 1 4 7 2 3 5 6 8 9 0 CH- Up to 200 TV programmes can be stored in this set. Once you have preset the programmes, you will be able to use the CH-/+ or NUMBER button to select the programmes. Programmes can be tuned using automatic or manual modes. Auto programme(atm) All programmes that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1 Press the MENU button. ATM MANUAL STORE FINE TUNE ADD/ERASE CURRENT CHANNEL 2 2 Press VOL+ button to select the fourth menu. 3 Press CH- button to enter the menu then press CH-/+ buttons to select the ATM. 4 Press VOL+ button to start the search. English-11
PROGRAMME SETUP Manual programme Manual programme lets you manually tune and arrange the programmes in whatever order you desire. 1 Press the MENU button. 2 Press VOL+ button to select the fourth menu. 3 Press PRO- button to enter the menu then press CH-/+ buttons to select the MANUAL STORE. 4 Press VOL+ button to start the search. Channel fine tuning Channel fine tuning is not suggested unless it is necessary when abnormal status occurs to achieve a better picture or sound quality. 1 Press the MENU button. 2 Press VOL+ button to select the fourth menu. 3 Press CH- button to enter the menu then press CH-/+ buttons to select the FINE TUNE. 4 Press VOL+ button to start fine tuning adjustment until the best picture and sound are achieved. English-12
PROGRAMME SETUP Skipping a programme ATM MANUAL STORE FINE TUNE ADD/ERASE CURRENT CHANNEL 2 1 Select a channel to be skipped with the CH-/+ or Number button. 2 Press the MENU button. 3 Press VOL+ button to select the fourth menu. 4 Press CH- button to enter the menu then press CH-/+ buttons to select the ADD/ERASE. 5 Press VOL-/+ buttons to turn on/off the skip channel. Sound system & Video system set up OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME English DK Auto 0 min/0 min If the color or sound of one channel is abnormal.it might be because the colour or sound system has been set improperly.you may follow the instruction below to adjust it. 1 Select a Sound system with the VOL+ button. Result: BG /I/DK /L/L 2 Select a Video system with the VOL+ button. Result: PAL/SECAM/AUTO English-13
PICTURE CONTROL You can adjust Brightness, Contrast, Sharpness, Colour to the levels you prefer. 1 Press the MENU button. BRIGHTNESS CONTRAST SHARPNESS COLOR 2 Press VOL+ button to select the first menu. Items BRIGHTNESS Low High 3 Press CH- button to enter the menu then press CH-/+ buttons to select a picture item. CONTRAST SHARPNESS Low Low High High 4 Press VOL-/+ buttons to adjust the picture parameter on as you want. COLOR Light Dark English-14
PICTURE CONTROL P.MODE (PICTURE STATUS Mode) 1 Press the P.MODE button. P.MODE 2 Press the P.MODE button repeatedly to select. 3 Each press of the button,the screen display changes as below. STANDARD: Standard Picture Appearance DYNAMIC:High picture contrast MOVIE: For moving picture MILD: Softer Picture Appearance CUSTOM:User mode Sound Control 1 Press the MENU button. DIGITAL BASS AVC BALANCE EQUAUZER 2 Select the second menu. 3 Press CH- button to enter the menu then press CH-/+ buttons to select the DIGITAL BASS AVC and BALANCE item. 4 Press VOL+ button to make desired adjustment. English-15
SET THE EQUALIZER USER 1 Select Equalizer by pressing the CH- button and press VOL+ button to enter the submenu. 2 Select a sound band by pressing the CH- button. DIGITAL BASS AVC BALANCE EQUAUZER 3 Make appropriate sound level with the VOL+ button. 4 Press the MENU button to exit. 120Hz 500Hz 1.5kHz 5kHz 10kHz Sound Control S.MODE (Sound Status Mode) 1 You can press the S.MODE button repeatedly to select. Also you can define the CUSTOM mode by set the Equalizer. S 2 The sound mode STANDARD, MUSIC, MOVIE and SPEECH are for the good sound reproduction at the factory and cannot be changed. English-16
OTHERS Option Control 1 Press the MENU button. 2 Press VOL+ button to select the third menu. 3 Press CH- button to enter the menu then press CH-/+ buttons to select the desired item. OSD TONE OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME English DK Auto 0 min/0 min 1 When the OSD TONE is set ON, the background of the menu will be transparent. SLEEP TIME OSD TONE LANGUAGE SOUND SYSTEM COLOR SYSTEM SLEEP TIME English DK Auto 0 min/0 min 1 You can press VOL+ button to set the sleep time among 10min/20min/30min/60min/90min/120min 180min/240min. The sleep time you set. 30 min/25min The remainder time Listening to A2 Stereo/NICAM NICAM 1 Press the NICAM button on remote controller to select between A2 stereo/nicam if the signal with A2 stereo/nicam has been received. English-17
EXTERNAL AUDIO AND VIDEO DEVICE CONNECTIONS Some external signal sources, such as VCR, video camera or PC, can be linked to the television. DVD, VCD and other equipment Stereo To DVD component input To SCART To outside input To SCART DC IN D-SUB IN HEADPHONE PC AUDIO IN SCART S-VIDEO AUDIO VIDEO ANT AC-DC converter DVD, VCD or other units To S-VIDEO input To audio input To video input To power supply Headphone port Plug the headphone in the television headphone port, then the television programme sound will be heard from the headphone, not by the television speaker. Press VOL+/- buttons to increase or decrease the sound volume. No sound will be heard if MUTE button is pressed. Headphone port English-18
CONNECTED TO PC AS A MONITOR SCART input You may get the Y Pb/Cb Pr/Cr signal of DVD from the SCART terminal by the SCART-DVD connecting cable. DVD Player with Y Pb/Cb Pr/Cr output terminal VGA input DC IN D-SUB IN HEADPHONE PC AUDIO IN SCART S-VIDEO AUDIO VIDEO ANT To D-SUB IN To PC AUDIO IN 1 Connect PC VGA output port with television D-SUB IN port. 2 Connect PC audio cable to television PC Audio IN port. 3 Press PC button for PC mode option. 4 Turn on PC and PC images will be displayed on the television screen. NOTE 1 When the television temperature is low, initial pictures might flicker a bit. 2 Some red, green and blue spots may appear on the screen. 3 It is recommended that television screens be set at 800X600(pixel)/60Hz. English-19
SPECIFICATIONS Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model Dimensions Net weight Power source Input L20AV6-A0 550X1X449 9.3kg --- 12V 5.0A 60W L20L6A 552X210X440 8.9kg --- 12V 5.0A 60W L15SV6-A0 419X170X353 5.4kg --- 12V 4.0A 48W L17LV6-A1 490X170X355 5.kg --- 12V 5.0A 60W L17L6A-G1 445X210X395 6.5kg --- 12V 5.0A 60W Picture, sound system Antenna input impedance Audio output External input port PAL/SECAM-B/G,I,D/K,L,L 75 1.5W+1.5W A/V input PC input S-video input PC audio input SCART input 12V DC input Antenna input AC converter Input: ~150-240V 50/60Hz, Output: --- 12V Temperature Working:0 C~50 C Storage:-20 C~60 C NOTE:The dimension in this manual is a approximation. Accessories 1 AC-DC converter set 2 AC cable 3 Remote controller (battery loaded) 4 Owner's Manual Note: 1 Technical information of the appliance that you have just purchased might vary. 2 Unauthorized repair and disassembly are prohibited to avoid electric or fire hazards. English-20
TROUBLESHOOTING Verify and try to solve the problems by yourself according to the instructions specified in the table below before contacting the after-sales service for technical assistance. Do not set the television with a still picture for an extended period as this might result in image residue on the screen. Normal picture images will be resumed within 12 hours after normal programmes are displayed. No sound or picture No picture/av mode Good picture, no sound or with noise Excessive brightness Dark image Failed remote control Obscure or flickering picture Overlapped pictures Unstable pictures Television not properly plugged to power socket Standby mode set (power indicator is red) Brightness not properly set Screen not in good condition No signals received at input port Sound setup and system not properly set Mute mode activated Headphone plugged AV input port not properly set Brightness and chroma not properly set Brightness not properly set Screen not in good condition Battery out of power Remote controller in direct sunlight Weak signals (poor signals or incorrect antenna direction) Antenna not properly connected Antenna set to incorrect direction Electric wave reflection due to mountain or buildings Disturbance of auto,hi-voltage main or neon lights Disturbance of antenna and power input cable English-21