4x HDTV Switcher Operation Manual Y YPb Model: YPbPrSW-4P
Y YS-3 emote Control Protocol * The connection between the switcher and remote controller with S-3 modem cable. Pins definition of modem cable YPbPrSW-4P PIN 3 4 5 6 7 8 9 * S-3 transmission format: Baud ate : 9600 bps Data Bit : 8 Bits Parity: None Stop Bit: bit * Command : Definition T xd x D GND emote Controller PIN 3 4 5 6 7 8 9 Definition xd T x D GND Command Code "I" + "" "I" + "" "I" + "3" "I" + "4" "P" + "" "P" + "0" Comment POT ON POT ON POT 3 ON POT 4 ON POWE ON POWE OFF
Applications: This HD/SD switcher is designed for switching between various HD and SD sources for sharing one TV display. Simply pressing a button on remote control you can select your desired HD/SD source for display on the TV monitor. Features: - Component/ composite switcher. - Ideal for home theater and presentation application. - High bandwidth performance 650MHz at -3dB. - I remote control. - Easy to install and operate- plug and play solution gets to work immediately. - This HD/SD switcher can be controlled either through input selection button on the front panel or using included infrared remote control. - S-3 interface allows control from a distant device. - Supports HDTV high resolution : 480i, 576i, 480p, 576p, 70p, 080i and 080p. - Supports audio formats: S/PDIF (digital) and / (analog). Package includes: - I emote controller. - 4 x HD/SD switcher w/s-3. - 5V DC power supply. - User's manual. - One set of CA to CA audio cable. - One set of 3 CA to 3 CA video cable. - A 3A lithium battery.
Operation controls and functions Front Panel POWE 3 4 INPUT 4x HDTV Switcher 3 4 5 6 7 8 9 0. Power indicator ED.. Power: Press POWE button to turn on the unit for working. 3. I sensor: Infrared remote control sensor. 4. Input indicator ED. 5. Input : Press this button, then ED lights up, source is selected. 6. Input indicator ED. 7. Input : Press this button, then ED lights up, source is selected. 8. Input 3 indicator ED. 9. Input 3: Press this button, then ED lights up, source 3 is selected. 0. Input 4 indicator ED.. Input 4: Press this button, then ED lights up, source 4 is selected. ear Panel COAXIA COAXIA COAXIA COAXIA COAXIA DC 5V S3 OUTPUT INPUT 4 INPUT 3 INPUT INPUT 3 4 5 6 7. S3: 9-pin D-sub female connector for connecting to your other control console for remote control.. YUV/ output: Use a 3 CA to 3 CA cable to connect to your display. 3. YUV/ Input 4 : Use a 3 CA to 3 CA cable to connect to your source 4. 4. YUV/ Input 3 : Use a 3 CA to 3 CA cable to connect to your source 3. 5. YUV/ Input : Use a 3 CA to 3 CA cable to connect to your source. 6. YUV/ Input : Use a 3 CA to 3 CA cable to connect to your source. 7. DC power jack: 5V A power input, center +.
emote Control. Power: Switch between power ON and Standby.. Press button to select source. 3. Press button to select source. 4. Press button 3 to select source 3. 5. Press button 4 to select source 4. Note: eplacement battery can be found at a local electronic retail store. 3 4 5 Pull out the tab to activate battery Specifications: - Input: YUV(YPbPr) x 4 via 3 CA connectors Vp-p @ 75 ohm Video x 4 via CA connectors Vp-p @ 75 ohm S/PDIF (Digital format) x 4 via coaxial connectors, 0.5~ Vp-p@75 ohm load. Stereo /(Analog format) x 4 via CA connectors - Output: YUV (YPbPr) x via 3 CA connectors Vp-p @ 75 ohm Video x via CA connectors Vp-p @ 75 ohm S/PDIF (Digital format) x via coaxial connector, 0.5~ Vp-p@75 ohm load. Stereo / (Analog format) x via CA connectors - Bandwidth: 650MHz (-3dB) - S-3 interface control via DB-9 female connector - Infrared remote control sensor via remote control unit. - Differential gain: 0.05% - Differential phase: 0.05% degree - Power consumption: 5W(max.) - Dimensions: 9(W) x 76(D) x 47.5(H)mm - Unit weights:.5kgs 3
Connection and Installation:. Works as a 4-in -out HD switcher for sharing one HDTV display. COAXIA COAXIA COAXIA COAXIA COAXIA DC 5V S3 OUTPUT INPUT 4 INPUT 3 INPUT INPUT YUV input 4 DVD 4 YUV input 3 DVD 3 YUV input DVD YUV input DVD Plasma/CD TV or any monitor with YUV input. Works as a 4-in -out composite switcher for sharing one SDTV display. COAXIA COAXIA COAXIA COAXIA COAXIA DC 5V S3 OUTPUT INPUT 4 INPUT 3 INPUT INPUT CT or any monitor with CA input input 4 DVD 4 input 3 DVD 3 input DVD input DVD 4