Date: Quantity: Company: Project: Media Tube CW The Traxon Media Tube CW is an IP66/IP67-rated slim LED tube for any wall or façade media lighting. Available in 295mm, 495mm, 995mm, and 1495mm lengths, the simple but robust construction, allows up to 16m of tubes to be daisy chained on a single power run. Product Specifications Direct Diffused Light Source (LEDs) 12 20 40 60 12 20 40 60 Color Temperature 6500 K - Cold white Beam Angle 120 180 approximate Luminous Flux 1 Efficacy 1 386.65 lm 32.2 lm/w Cover Lens None - Clear silicon potting PC Diffuser, CAST-UV protected LED Pitch 25mm Housing Aluminium Aluminium / PC Cover Dimensions (W x H) 28.5 x 28mm 1.12 x 1.10 28.5 x 48.5mm 1.12 x 1.91 (L) 295mm 11.6 495mm 19.5 995mm 39.2 1495mm 58.9 295mm 11.6 495mm 19.5 Weight Regulatory Listing & Safety Approval Operating Temperature Storage Temperature 0.59kg 1.3lbs CE (pending) 0.8kg 1.8lbs 1.6kg 3.5lbs 30 C to +50 C / 22 F to +122 F 40 C to +70 C / 40 F to +158 F 2.3kg 5.1lbs 0.48kg 1.1lbs Environment IP67 IP66 Suitable for coastal environments Humidity 0-90%, non-condensing 0.65kg 1.4lbs 995mm 39.2 1.3kg 2.9lbs 1495mm 58.9 1.95kg 4.3lbs Electrical Specifications Operating Voltage Power Consumption (max.) 48V DC 4.5W 6W 12W 18W 4.5W 6W 12W 18W ~12W per meter System Specifications Power/Data Interface TX CONNECT Control DMX512 / e:pix / DVI capable Power Supply LED Engine 1000W 48V Indoor / LED Engine 240W 48V Outdoor Addressing Options Auto-Addressing (1 DMX512 channel per pixel) 1. Based on photometric data and maximum power consumption of Media Tube CW 995mm Direct view version LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Product Specification 02/16 V1.7 1 of 8
Photometrics Source Specifications Source High intensity power light emitting diodes 40 LEDs Optics 120 Cover Lens None Clear silicone potting (Direct View) CCT 6500 K Cold white Candela Distribution Light Output Cd: 0 31.54 63.07 90 75 Color Luminous Flux (lm) White 386.65 94.61 60 126.14 157.68 0 15 30 45 Illuminance at a Distance Center Beam LUX V Beam Width H 2m 39.42 5.0m 5.1m 4m 9.85 10.1m 10.3m 6m 4.38 15.1m 15.4m 8m 2.46 20.2m 20.5m 10m 1.58 25.2m 25.7m 12m 1.09 30.3m 30.8m For fc divide by 10.7 Vert.Spread: 103.3 Horiz.Spread: 104.2 For feet multiply by 3.28 IES and LDT files are available for download from the Traxon website. Product Specification 02/16 V1.7 2 of 8
Photometrics Source Specifications Source High intensity power light emitting diodes 40 LEDs Optics 180 approximate Cover Lens PC Diffuser, cast-uv protected (Diffused) CCT 6500 K Cold white Candela Distribution Cd: 0 105 90 Light Output Color Luminous Flux (lm) White 247.22 10.65 21.30 75 31.95 60 42.61 53.26 0 15 30 45 Illuminance at a Distance Center Beam LUX V Beam Width H 2m 13.31 5.9m 86.9m 4m 3.33 11.7m 173.7m 6m 1.48 17.6m 260.6m 8m 0.83 23.5m 347.4m 10m 0.53 29.4m 434.3m 12m 0.37 35.2m 521.1m For fc divide by 10.7 Vert.Spread: 111.6 Horiz.Spread: 174.8 For feet multiply by 3.28 IES and LDT files are available for download from the Traxon website. Product Specification 02/16 V1.7 3 of 8
Dimensions Media Tube CW Direct View 495mm/19.5 / 995mm/39.2 / 1495mm/58.9 See DETAIL A 140mm/5.5 15mm/0.6 140mm/5.5 DETAIL A 28.5mm/1.12 28mm/1.10 295mm/11.6 59.5mm/2.3 59.5mm/2.3 33mm/1.30 NOTE THE PLACEMENT OF THE MOUNTING BRACKET DIFFERS TO THAT OF THE LONGER TUBES Media Tube CW Diffused View 495mm/19.5 / 995mm/39.2 / 1495mm/58.9 See DETAIL B 140mm/5.5 15mm/0.6 140mm/5.5 DETAIL B 28.5mm/1.12 48.5mm/1.91 295mm/11.6 33mm/1.30 59.5mm/2.3 59.5mm/2.3 NOTE THE PLACEMENT OF THE MOUNTING BRACKET DIFFERS TO THAT OF THE LONGER TUBES Product Specification 02/16 V1.7 4 of 8
Mounting 55mm/2.17 75.5mm/2.97 43.5mm/1.71 DIRECT VIEW TUBE 43.5mm/1.71 DIFFUSED TUBE FRONT MOUNTING 295mm TUBE MOUNTING Cable fits inside mounting bracket M10 x 1.5P x 10mm REAR MOUNTING M10 x 1.5P x 10mm Product Specification 02/16 V1.7 5 of 8
System Diagram Meanwell Power Supply Unit 3x 48V DC 1kW BACK 3x 1kW Rackmount PSU Ring connectors can power up to 170 to fit M5 terminal 1m-length 40-LED tubes on PSU LCE2 fx CABLE A AWG0~6 DVI Source Ethernet Source 1939460000 (Weidmüller) TU.AC.0000300 Power Distribution Blocks Ethernet Switch Video Micro Converter (VMC) 160185 CAT5 DATA CABLE (UTP AWG24) DVI IN (DVI-D/DVI-I) GND DMX+ DVI OUT DMX Maximum 8 outputs Maximum 1536 channels per output DVI IN (DVI-D/DVI-I) DVI OUT Daisy-chained VMCs Max. units per chain: 8 Use DVI splitter for further VMC chain See VMC specification for more information RJ45 Plug Pin 3: GND Pin 2: DMX+ Pin 1: DMX CABLE B LED Engine 1000W 48V - single terminal PS.IE.0011100 PSU Rack for LED Engine 1000W 48V (Houses 3 x PS.IE.0011100) PS.AC.0500100 From Power/Data source To fixture Note: Markings on Wago terminal blocks indicate polarity of fuse blocks. Connection point obscured by fuse block + Interconnection Example: POWER INJECTION WAGO terminal blocks on 35mm wide DIN rail M12 Power/Data Injector Cable Fuse: TU.AC.0000101 6A Slow blow Ø5 x 20mm (TU.AC.9900000 100pcs) FUSE FUSE + Wago Terminal block set TU.AC.0000200 Injecting power for next daisy chain. CABLE C Power distribution block to Wago Terminal Block FUSE FUSE + 48V DC GND DMX+ DMX Tube Starter Cable POWER: AWG18 DATA: AWG24 TUBES ARE DAISY CHAINED CABLE D Interconnection cable AWG12~14 (1m max) WAGO Part no. 281-611/281-542 281-309 (cover plate) 281-335 (cover plate) FUSE FUSE + 281-656 and 281-512/281-416 (Fuse block) 280-901 280-309 (cover plate) 249-117 (End stopper) Signal 48V DMX Ground DMX+ Wire Size AWG 18 AWG 24 AWG 18 AWG 24 For CABLE C Color Brown White Blue Black Daisy-chained LED Tubes Max. 680 LEDs (e.g. 17x 1m 40-LED tubes*) Total 680 DMX512 channels (1 channel / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures vary according to cable lengths. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Starter Cable M12 End Cap DO.AC.0000800 Product Specification 02/16 V1.7 6 of 8
System Diagram INDOOR OUTDOOR DATA AWG14, 300mm AC 110V/220V 50/60Hz Installation engineer should use appropriate plugs for outdoor connection. LED Engine 240W 48V PS.OB.0011002 300mm Waterproof Junction Box M12 Starter Cable POWER: AWG18 DATA: AWG24 M12 Starter Cable Signal 48V DMX DMX+ Ground Wire Size AWG 18 AWG 24 AWG 24 AWG 18 Color Brown White Black Blue TUBES ARE DAISY CHAINED Daisy-chained LED Tubes Max. 600 LEDs (e.g. 15x 1m 40-LED tubes) Total 600 DMX channels (1 channel / pixel) Data Injector is needed when connection has more than 1 universe. POWER/DATA INJECTION M12 Power/Data Injector Cable TU.AC.0000101 Injecting power for next daisy chain. Product Specification 02/16 V1.7 7 of 8
Ordering Fixtures Please contact regional Traxon sales office for details Standard Accessories (Included in delivery) N/A 2 x Tube Mounting Brackets & Mounting Plates and 4 x CSK Head Screw M3x12 N/A Optional Accessories DO.AC.0000800 Connector End Cap M12 AA438670055 TX Control 160185 Video Micro Converter (DMX/e:pix) AA438940235 160194 Video Micro Converter Garage (Optional) AA623920031 EN.BX.0000001 Butler XT2 AA557270131 160174 Butler XT2 Garage (Optional) AA556660031 EN.BU.0000001 Butler S2 AB436200031 AC.BG.0000001 Butler S2 Garage (Optional) AA611800031 EN.LC.9400000 LCE2 fx AA629460035 TX Connect TU.AC.0001201 M12 Starter Cable (Open Wire), 5m (18AWG) AA556480055 TU.AC.0000501 M12 Starter Cable (Open Wire), 20m (18AWG) AA438710055 TU.AC.0001111 M12 Starter Cable, 35m (18AWG) AA556470055 DO.AC.1000001 M12 Interconnection Cable, 140mm AA588450055 TU.AC.0200201 M12 Interconnection Cable, 1.5m (18AWG) AA438680055 TU.AC.0200101 M12 Interconnection Cable, 4m (18AWG) AA556510155 TU.AC.0000101 M12 Power/Data Injector Cable AA556410055 TU.AC.0000201 WAGO Terminal Block Set AA556430135 TU.AC.9900000 6A SB Fuse (100pcs) AA612880055 TX Control PS.IE.0011100 LED Engine 1000W 48V Indoor 48V AA5571401HA PS.AC.0500100 LED Engine Garage (for 3 pcs 1000W Indoor PSU) AA6294800HA PS.OB.0011002 LED Engine 240W Outdoor 48V AA5572601HA Product Specification 02/16 V1.7 8 of 8