CLINICALLY PROVEN DESIGNS Radiology & PACS WWW.TLGC.COM
Rely on Optik View high definition diagnostic and reference displays to provide your Customer s with industry s highest quality medical visualization. Optik View Medical Displays conform to industry standards for Part 14, AAPMTG18 and DIN 6868157 for diagnostic and reference use. Radiologists and Clinicians will experience reliable operation and the consistent delivery of images with exquisite anatomic details over the life of the display.monochrome and color displays are available in a range of MP resolutions and feature auto and selfcalibration tools designed to streamline workflow and assure a consistent visualization experience.
FEATURE Auto Luminance Stabilizer () Digital Front PerfectLum Replace with "The Auto Luminance Stabilizer () is based on a builtin sensor and delivers a consistent viewing experience by maintaining the preferred luminance over display lifetime. Moreover, luminance levels are stabilized shortly after system startup. Digital () significantly reduces differences in luminance distribution over the LCD panel. With deviations lowered to maximal 5%, thresholds defined by IEC625631 and DIN6868157 are well met. Improve your diagnostic confidence through artifactfree visualization and enhancement of subtle findings. An integrated front sensor can be used to measure the tonal response of the display. This allows accurate greyscale calibrations and validations in accordance with wellknown standards like Part 14. The sensor also serves as reference for the Auto Luminance Stabilizer, resulting in a very stable and reliable luminance output. When used with PerfectLum, the Front streamlines workflow by negating the need for external hardware calibration tools. PerfectLum streamlines workflow and improves oversight through serverbased control, scheduling, and reporting through serverbased Quality Assurance and Calibration software. This medical monitor quality control tool uses a guided software process, that leverages Front and technologies found in Optik View displays, to simplify compliance with PACS Displays as defined by APM TG18, DIN 686857, new DIN 6868157 NormEntwurf, JESRA X0093, and IEC 625631. Part 14 Grayscale Display Function Calibration. Decreases blooming and improves visualization of grayscale variations through compliance with Medical Use s: NEMA & ACR 04 05
FEATURE Presence Ambient Universal Conformance Streamline your workflow and assure highquality diagnostic visualization through one touch calibration and reporting of luminance, color temperature, and gamma. The function is OSD driven and negates the need for connecting the display to a PC with accordant calibration software. The presence sensor automatically dims the backlight when the user has left his workplace. As a result, the power consumption is decreased by up to 95%, extending backlight life too. The display immediately returns to normal operation upon sensing user presence. By means of an ambient sensor, the display luminance can be adjusted automatically to actual ambient light conditions. Improve your viewing experience, even under changeable room light situations, without extra effort. Optik View Displays are designed for reliable operation in medical use environments and conform to industry standards for medical use as defined by IEC606011, EMC, AAPM, and DIN6868157/JESRA. Each display undergoes a rigorous multistage QA process and is accompanied with a Product Quality Report. Serial RS232 Remote By utilizing the protocol, display parameters like Contrast, Brightness, Adjustment, Recall Default, Level, Backlight and Auto Image Adjust can be easily changed remotely. 06 Improve your workflow through remote control of important display parameters including power state. Communication with the display is realized via RS232 interface, accompanied by precise protocol information. 07
COLOR 1MP 19" SXGA Clinical Display ID The Optik View 1MP Display is designed for medical professsionals who require consistent image quality and reliable operation. Ideally suited for multimodality applications such as clinical review of Xray, Ultrasound, CT, MRI, and PET images, this display can be mounted to an adjustable desk stand to improve ergonomics. IPS with LED backlight 1280 (H) x 1024 (V) 19 376.32 (H) x 301.06 (V) 0.294 (H) x 0.294 (V) 170 (H) / 170 (V) 30 (on/off) 330 (typical) 1000:1(typical) NTSC: 68%/ 72%, srgb: 93%/ 102% 1073M (10 bit) 1x DVI, 1x DP, 1x VGA Panel specs. 432 379.4 75.6 166 User Adjust Gamma s (Ambient/ Front/ Presence) Neutral/ Warm/ Cool/ User R Gain/ G Gain/ B Gain 1.8/ 2.0/ 2.2/ / Calibration 10 bit / / Full Screen / / AC 100240V 45 (Max)/ 2 (Off Mode) 466.5 305 353 251 50 mm Other stands available 5 20/ 140/ 90 Other stands available 432 x 466.5 x 251 (with stand) 8.3 kg (with stand) White / SXGA SXGA 5 35 30% 75% 20 60 10% 90% CE(IEC/EN606011, IEC/EN6060112) 10bit Whitep. Adjust DP DVI VGA Feature Available 08 **Specification are subject to change without notice. 09
COLOR 2MP 21.3" UXGA Diagnostic Display ID 377 The Optik View 2MP Diagnostic Display is designed for imaging professsionals who require consistent image quality and reliable operation. This display offers unique processing abilities to faithfully display organs, tissue, bone and fluid in minute detail, providing radiologists and clinicians with the most accurate color and monochrome images for analysis and diagnosis. Commonly used for diagnostic and reference image review of Xray, Ultrasound, CT, MRI, and PET images direct from modality imaging systems or via PACS, this display corforms to Part 14, AAPMTG18 and DIN 6868157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and selfcalibation tools, this display will deliver consistantly bright, uniform, and accurate images. 89.6 User Adjust Gamma s (Ambient/ Front/ Presence) IPS with LED backlight 1600 (H) x 1200 (V) 21.3 432 (H) x 324 (V) 0.27 (H) x 0.27 (V) 178 (H) / 178 (V) 20 (on/off) 440 (typical) 1500:1(typical) NTSC: 74%/ 75%, srgb: 98%/ 106% Panel specs. 16,7 million (8 bit) 1x DVI, 1x DP 1.2, 1x VGA 1x Upstream, 2x Downstream USB Neutral/ Warm/ Cool/ User R Gain/ G Gain/ B Gain 1.8/ 2.0/ 2.2/ / Calibration 14 bit 170/ 250 / / Full/ 1:1/ 4:3/ 16:9/ 16:10 / / AC 100240V 45 (Max)/ 1 (Off Mode) 607.5 473 71.9 269.9 80 mm Other stands available 5 25/ 140/ 90 Other stands available 377 x 607.5 x 269.9 (with stand, pivot orientation) 11.3 kg (with stand) / VGA DL DVi DP 1.2 UXGA UXGA PIP RAP POP 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 14bit HW Calibration Whitep. Adjust Ambient Front Presence 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI Feature Available 10 **Specification are subject to change without notice. 11
COLOR 3MP 21.3" QXGA Diagnostic Display ID 377 The Optik View 3MP Diagnostic Display takes high resolution color and grayscale imaging to the next level. This display is ideally suited for PACS and Radiology departments requiring greater image detail. It supports Dual Link DVI input, a clock frequency of 60 Hz when displaying QXGA (1536 2048) resolution and frame synchronization between the computer and monitor to reproduce a smooth moving picture without frame loss. Commonly used for diagnostic and multimodality image review of Xray, Ultrasound, CT, MRI, and PET images via PACS, this display corforms to Part 14, AAPMTG18 and DIN 6868 157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and selfcalibation tools, this display willdeliver consistantly bright, uniform, and accurate images. 89.6 User Adjust Gamma s (Ambient/ Front/ Presence) IPS with LED backlight 2048 (H) x 1536 (V) 21.3 431.15 (H) x 324.86 (V) 0.2115 (H) x 0.2115 (V) 178 (H) / 178 (V) 30 (on/off) 1000 (typical) 1400:1(typical) SC: 69%/ 72%, srgb: 95%/ 102% Panel specs. 1.07 billion (10 bit) 1x DVI, 1x DP 1.2 1x Upstream, 2x Downstream USB Neutral/ Warm/ Cool/ User R Gain/ G Gain/ B Gain 1.8/ 2.0/ 2.2/ / Calibration 14 bit 300/ 400/ 500 / / Full/ 1:1/ 4:3/ 16:9/ 16:10 / / AC 100240V 85 (Max)/ 2 (Off Mode) 607.5 473 71.9 269.9 80 mm Other stands available 5 25/ 140/ 90 Other stands available 377 x 607.5 x 269.9 (with stand, pivot orientation) 11.3 kg (with stand) / VGA DL DVi DP 1.2 QXGA QXGA PIP RAP POP 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 14bit Whitep. Adjust HW Calibration Ambient Front Presence 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI Feature Available 12 **Specification are subject to change without notice. 13
COLOR 6MP 30" WQSXGA Diagnostic Display ID 711.28 The Optik View 6MP Diagnostic Display takes high resolution color and grayscale imaging to the next level. This display is ideally suited for PACS and Radiology departments requiring greater image detail. It supports Dual Link DVI input, a clock frequency of 60Hz when displaying WQSXGA (3280 2048) resolution and frame synchronization between the computer and monitor to reproduce a smooth moving picture without frame loss. Commonly used for diagnostic and multimodality image review of mamograpy, mammograpy combined with ultrasound, CT, MRI, and PET images via PACS, this display corforms to Part 14, AAPMTG18 and DIN 6868157 standards to deliver consistant monocrhome and color image quality without the need to switch between displays. Equipped with QA software and selfcalibation tools, this display will deliver consistantly bright, uniform, and accurate images. 95 45 200 100 User Adjust Gamma s (Ambient/ Front/ Presence) IPS with LED backlight 3280 (H) x 2048 (V) 30 645.5 (H) x 403.05 (V) 0.197 (H) x 0.197 (V) 170 (H)/ 170 (V) 30 (on/off) 900 (typical) 1000:1(typical) NTSC: 74%/ 85%, srgb: 91%/ 98% Panel specs. 1.07 billion (10 bit) 1x DVI, 2x DP 1.2, 2x HDMI 2.0, 1x VGA 1x Upstream, 2x Downstream RS232 (DSub 9pin) 5400K/ 6500K/ 7500K/ 9300K R Gain/ G Gain/ B Gain 1.8/ 2.0/ 2.2/ / Calibration/ srgb/ AdobeRGB/ SMPTEC/ Rec.709/ DCI 18 bit 200/ 300/ 400/ 500 / / Full Screen / / (DP+DP only) AC 100240V 148 (Max)/ 2.4 (Off Mode) 605.41 483.83 100 90 mm Other stands available 5 25/ / Other stands available 711.3 x 605.4 x 269.9 (with stand) 16 kg (with stand), 100 x 200 / DL DVi DP QXGA QSXGA 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 14bit HW Calibration Ambient Front Presence 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI Feature Available 14 **Specification are subject to change without notice. 15
MONO 1MP 19" SXGA Mono Clinical Display ID The Optik View 1MP Clinical Monochrome Display is ideally suited for quick display and review of radiology images at the time of capture. This highdefinition, multifunctional model features a precise calibration compliant with Part 14 and can be easilty integrated with imaging workstations. IPS Monochrome with LED backlight 1280 (H) x 1024 (V) 19 376.32 (H) x 301.06 (V) 0.294 (H) x 0.294 (V) 170 (H) / 170 (V) 30 (on/off) 1400 (typical) 1000:1(typical) 256 (8 bit) 1x DVI, 1x DP, 1x VGA 432 379.4 75.6 166 User Adjust Gamma s (Ambient/ Front/ Presence) 1.8/ 2.0/ 2.2/ / Calibration 10 bit 500 / / Full Screen / / AC 100240V 45 (Max)/ 2 (Off Mode) 466.5 305 353 251 50 mm Other stands available 5 20/ 140/ 90 Other stands available 432 x 466.5 x 251 (with stand) 8.3 kg (with stand) / SXGA SXGA 5 35 30% 75% 20 60 10% 90% CE(IEC/EN606011, IEC/EN6060112) 10bit DP DVI VGA Feature Available 16 **Specification are subject to change without notice. 17
MONO 2MP 20" UXGA Mono Diagnostic Display ID 453 410.4 The Optik View 2MP Diagnostic Monochrome Display is ideally suited for display of traditional radiographic images such as chest CR, DR and other imaging modalities requiring higher brightness and contrast performnce. This highdefinition display features Part 14 compliant calibration to ensure consistent image quality over the life of the product and can be used as a PACS/ HIS/RIS pointofuse display. Commonly used for imaging applications where brightness and contrast are paramount, this two megapixel monochrome diagnostic display is ideal for displaying an entire chest CR or DR image. Delivering a highdefinition and consistent viewing experience via Part 14 compliance, this highdefinition, multifunctional model ensures consistent image quality over the life of the product. Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSDdriven calibration and reporting function that negates the need for external calibration devices. 71.8 User Adjust Gamma s (Ambient/ Front/ Presence) MVA Monochrome with LED backlight 1600 (H) x 1200 (V) 20.1 408 (H) x 306 (V) 0.255 (H) x 0.255 (V) 170 (H) / 170 (V) 30 (on/off) 1000 (typical) 1000:1(typical) 256 (8 bit) 1x DVI, 1x DP 1.2, 1x VGA 1x Upstream, 2x Downstream USB 1.8/ 2.0/ 2.2/ / Calibration 14 bit 300/ 400/ 500 / / Full/ 1:1/ 4:3/ 16:9/ 16:10 / / AC 100240V 45 (Max)/ 1 (Off Mode) Sketches showing display in landscape orientation. 469 308.4 353 246.4 50 mm Other stands available 5 20/ 140/ 90 Other stands available 453 x 469 x 246.4 (with stand) 9.2 kg (with stand) / UXGA UXGA PIP PAP POP 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 14bit HW Calibration DP 1.2 DL DVI VGA 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI Feature Available 18 **Specification are subject to change without notice. 19
MONO 3MP 21" QXGA Mono Diagnostic Display ID 377 The Optik View 2MP Diagnostic Monochrome Display is ideally suited for display of traditional radiographic images such as chest CR, DR, and other imaging modalities requiring higher brightness and contrast performnce. This highdefinition display features Part 14 compliant calibration to ensure consistent image quality over the life of the product and can be used as a PACS/ HIS/RIS pointofuse display. Commonly used for imaging applications where brightness and contrast are paramount, this three megapixel monochrome diagnostic display is ideal for displaying an entire chest CR or DR image. Delivering a highdefinition and consistent viewing experience via Part 14 compliance, this highdefinition, multifunctional model ensures consistent image quality over the life of the product. Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSDdriven calibration and reporting function that negates the need for external calibration devices. 89.6 User Adjust Gamma s (Ambient/ Front/ Presence) IPS Monochrome with LED backlight 2048 (H) x 1536 (V) 21.3 431.62 (H) x 323.71 (V) 0.21075 (H) x 0.21075 (V) 178 (H)/ 178 (V) 22 (on/off) 1700 (typical) 1400:1(typical) 1024 (10 bit) 1x DVI, 1x DP 1.2 1x Upstream, 2x Downstream USB 1.8/ 2.0/ 2.2/ / Calibration 14 bit 300/ 400/ 500 / / Full/ 1:1/ 4:3/ 16:9/ 16:10 / / AC 100240V 60 (Max)/ 2 (Off Mode) 607.5 473 71.9 269.9 90 mm Other stands available 5 25/ 140/ 90 Other stands available 377 x 607.5 x 269.9 (with stand, pivot orientation) 11.3 kg (with stand) / DL DVI DP 1.2 QXGA QXGA PIP PAP POP 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 14bit HW Calibration Ambient Front Presence 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI Feature Available 20 **Specification are subject to change without notice. 21
MONO 5MP 21" QSXGA Mono Mammography Display ID 390.6 The Optik View 5MP Diagnostic Monochrome Display is ideally suited for the review of Mammography images. This display offers equisite resolution to enhnce visualization of fine details. Allowing radiologists and oncologists to accurately diagnose tissue abnormalities. Commonly used for review of Mammography images, this five megapixal monochrome diagnostic display is FDA certified and meets specifications for maximum and minimum luminance and grayscale standards defined by IEC625631 and DIN686157 to improve diagnostic confidence through artifact free visualization and enhancement of subtle findings. Radiologists and clinicians will experience improved workflow and be assured of high diagnostic quality through a one touch OSDdriven calibration and reporting function that negates the need for external calibration devices. 42 79 User Adjust Gamma s (Ambient/ Front/ Presence) IPS Monochrome with LED backlight 2560 (H) x 2048 (V) 21.3 422.4 (H) x 337.9 (V) 0.165 (H) x 0.165 (V) 170 (H)/ 170 (V) 25 (on/off) 1200 (typical) 1200:1(typical) 1024 (10 bit) 1x DVI, 1x DP + LAN RJ45 1x Upstream, 2x Downstream RS232 (DSub 9pin) 1.8/ 2.0/ 2.2/ / Calibration 18 bit 300/ 400/ 500/ 600/ Auto/ Range / / Full/ 2x / / 100 AC 100240V 70 (Max)/ 3.5 (Off Mode) 487.8 614.5 100 90 mm Other stands available 5 25/ 140/ 90 Other stands available 390.6 x 614.5 x 269.9 (with stand, pivot orientation) 12 kg (with stand) / DL DVI DP 1.2 HDMI 2.0 VGA HSB Hub WQ SXGA WQSXGA PAP POP 5 35 30% 75% 20 60 10% 90% ctuvus (ANSI/AAMI ES606011:2005+A2(R2012)+A1; CAN/CSA C22.2 No, 18bit HW Calibration Whitep. Adjust Ambient Front Presence 606011:14), FCCB, CE (IEC/EN 606011, IEC/EN 6060112), VCCI, CCC, BSMI, FDA 510K Feature Available 22 **Specification are subject to change without notice. 23
SALES OFFICE HEAD UARTERS SALES OFFICE R&D & MANUFACTURING HEAD UARTERS 2B Wing Drive Cedar Knolls, NJ 07927 +973 983 8809 SALES OFFICE Charlotte, NC 28277 +973 983 8809 Irvine, CA 92618 +714 878 1912 PROGRAM MANAGEMENT OFFICE Egg Harbor Township, NJ +609 399 4050 R&D MANUFACTURING 9F., NO.351, Sec. 2, Zhongshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C)