Specification of Control Board (Data Sheet / Version 1.4) Mar 2005-1 -
CONTENS 1. Spec summary ------------------------------------------------------------------- 3 2. General Description ------------------------------------------------------------ 3 3. Block Diagram ------------------------------------------------------------------- 4 4. Dimension ------------------------------------------------------------------------ 5 5. Pictures --------------------------------------------------------------------------- 6 6. Pin information ------------------------------------------------------------------ 7 7. Reference data ----------------------------------------------------------------- 9 8. Setup for Operation (OSD) -------------------------------------------------- 11 9. Applicable Graphic Mode ---------------------------------------------------- 13 10. Appendix ------------------------------------------------------------------------- 14 The information presented in this document may form a part of quotation or contract under the agreement of both parties. Otherwise, this datasheet is subject to change without notice. - 2 -
1. SPEC SUMMARY State of the art high performance picture quality and low cost designed. Analog RGB/ DVI/ VBS & SVHS/ Audio L,R/ Audio In / Headphone out. Optional input combination, e.g., TV with PC Monitor Full CRT multi-sync monitor compatibility Multi-sync capability up to SXGA/WXGA resolution @75Hz,compatible standard DOS, VGA, SVGA, XGA and SXGA/WXGA VESA timing Expand DOS, VGA and SVGA to full screen display True color (16.7) data processing and display driving Single control operated On-Screen-Display(hereafter OSD")user interface Full control of all relevant display and interface parameter via OSD Multi language support (5Language) VESA DDC 1/2B compliant Compatible with VESA DPMS power saving modes Low power consumption: operating 40W(PC Only), power save 3W Small form factor:180x130 mm +12V/3.5A DC Single Power:42 watt AC/DC power adapter recommended Operating temperature: 0 to 50 Multi-standard color (PAL/Secam/NTSC),Multi-standard Mono sound(b/g,i,d/k,l) 2. GENERAL DESCRIPTION The ARIRANG Ver1 is an advanced TFT LCD Monitor Control Board. This design enables a full conventional CRT monitor & TV replacement with a large size Active Matrix LCD module. It is suitable for video resolution up to SXGA @ 75Hz in all video modes, the full display area of the module is used. The design is implemented as a single printed circuit board. As the ARIRANG Ver1 is designed to act as a full monitor interface. Besides the main functionality of an analog and DVI, Video, S-Video, TV also various appealing On-Screen-Display Menu layouts are possible on customer s request. The ARIRANG Ver1 is designed to support various TFT LCD s under the SXGA resolution by BIOS option, customer s line-up their monitors with their own identity with following options. - 3 -
3. BLOCK DIAGRAM 12V Reg 5V Reg 3.3V 2.5V Inverter Control Inverter Interface Video In (DVI) Video In (R.G.B.) Sync In (H,V) DDC Channel DVI Input SCALER (Realtek) RTD 2023 RTD 2523 (DVI) (Option) LCD Interface MCU Svnc In (SVHS Y/C) Sync In (CVBS) Audio (TI) TVP5465 EPROM Audio In put UTC TDA 7496L Audio 2W x 2 Audio 1 Audio 2-4 -
4. Dimension 4.1 Main Board 4.2 OSD Board - 5 -
5. PICTURES 5.1 Main Board VGA Input Video Input S-Video Input DC 12V Input Audio Input LVDS LCD TTL LCD 5V /12V INVERTER OSD SPEAKER SPEAKER CONNECT CONNECT CONNECT CONNECT CONNECT LIFT RIGHT Power OSD Down Auto Power Menu Source LED Cable Up Select - 6 -
6. CONNECTORS AND PIN INFORMATION 6.1 Connectors Summary Service Maker Part number Description Mating Housing LCD I/F (LVDS) YEON HO 12507WR-30P 1.25mm, 30p SMD YEON HO / 12507HS-30 SPEAKER OUT MOLEX 53014-0410 04P, 2.0mm, Straight YEON HO / SMH200-02 DVI IN 2mm, 3row 29P, R/A Standard VGA cable (Male) VGA IN 2mm, 3row 15P R/A Standard VGA cable (Male) S-VHS SW-409 04p R/A Standard S/PDIF cable (Male) RCA (CVBS) Kumkang RCA-103A (YELLOW) 01p R/A Standard RCA cable (Male) AV (Sound R) Kumkang RCA-103A (RED) 01p R/A Standard RCA cable (Male) AV (Sound L) Kumkang RCA-103A (WHITE) 01p R/A Standard RCA cable (Male) Audio IN SAMLUNG ST-323-01 01p R/A Standard Stereo cable (Male) Headphone OUT SAMLUNG ST-3005-02 01p R/A Standard Stereo cable (Male) DC IN PD527A-1111 2.0/2.5 pie, DC-JACK DC Adapter OSD I/F YEON HO 12505WR-07 1.25mm, 07p SMD YEON HO / 12507HS-07 INVERTER I/F YEON HO 12505WR-06 1.25mm, 06p SMD YEON HO / 12507HS-06 6.2 Pin Information Detail 6.2.1 TTL 24Bit (CN10) Pin No. Function Pin No. Function Pin No. Function Pin No Function 1 PVCC 11 NC 21 R3 P19 31 G2 P10 2 GND 12 R0 P16 22 G6 P14 32 B3 P3 3 PVCC 13 NC 23 R4 P20 33 G3 P11 4 DOT CLK 14 GND 24 G7 P15 34 B4 P4 5 DE 15 NC 25 R5 P21 35 G4 P12 6 VSYNC 16 NC 26 B0 P0 36 B5 P5 7 HSYNC 17 R1 P17 27 R6 P22 37 G5 P13 8 G0 P8 18 NC 28 B1 P1 38 B6 P6 9 G1 P9 19 R2 P8 29 R7 P23 39 GND 10 NC 20 GND 30 B2 P2 40 B7 P7 NC 為 TCON 控制勿接任何訊號以免故障 6.2.2 LVDS Dual Channel (CN12) Pin No. Function Pin No. Function Pin No. Function Pin No Function 1 PVCC 11 GND 21 GND 31 GND 2 E0-12 E2+ 22 O0-32 O2+ 3 PVCC 13 GND 23 GND 33 GND 4 E0+ 14 ECLK- 24 O0+ 34 OCLK- 5 GND 15 GND 25 GND 35 GND 6 E1-16 ECLK+ 26 O1-36 OCLK+ 7 GND 17 GND 27 GND 37 GND 8 E1+ 18 E3-28 O1+ 38 O3-9 GND 19 GND 29 GND 39 GND 10 E2-20 E3+ 30 O2-40 O3+ - 7 -
6.2.3 INVERTER (CN9) Pin No Function 1 12V 2 GND 3 ON / OFF 4 GND 5 ADJ 6.2.4 POWER In (CN8) Pin No Function 1 GND 2 GND 3 12V 4 12V 6.2.5 POWER Out (CN7) Pin No Function 1 12V 2 5V 3 GND 6.2.7 OSD I/F (CN5) Pin No Function 1 GND 2 KEY5 3 KEY4 4 KEY3 5 KEY2 6 KEY1 7 LED2 8 LED1-8 -
7. REFERENCE DATA 7.1 Limiting Values Symbol Description Min Max Unit VDD +12V DC Power supply 10.8 V 13.2 V V IDD Input Current 0.0 +4.0 A Vi (RGB) Video input signal -0.3 +3.0 VDC 7.2 FEATURES Parameter Value Unit Overall dimensions Width Height Depth (from PCB bottom) 180 120 14.5 mm mm mm Max. output resolution 1280 x 1024 pixel Data processing 8 x 3 bits Input impedance Video Sync 75 - ohm ohm Sync polarities +/- Sync levels LVDS 2Channel Supply voltage 12.0V V DC Max. number of colors 16.7M colors Operating temperature 0 ~ 50 Storage temperature -20 ~ 70 Max. weight 60 g - 9 -
7.3 ELECTRICAL PARAMETERS 7.3.1 General Description Symbol Description Min Typ Max Unit VDD +12V DC Power supply 10.8 12 13.2 V VI (RGB) Video input signal (w.r.t. GND) 0.5 0.7 1.0 Vpp fs Video sample rate 70 MHz fhs Horizontal sync frequency 30 60 KHz fvs Vertical sync frequency 56 75 V FSIH Sync input high level 3.3 V VSIL Sync input low level 0.8 VDC IDD1 Supply current +12V (w/o LCD & Inverter) IDD2 (with LCD & Inverter) IDDPS1 Supply current (w/o LCD & Inverter, Power save) IDDPS2 (with LCD & Inverter, Power save) 7.3.2 Adaptor Description (12V / 4.0A) Symbol Description Min Typ Max Unit VDD +12V DC 10.8 12 13.2 V I OUT Output current 0.0-4.0 A VRIPPLE Ripple & Noise 120 mvpp VEFF Efficiency 75 % Connector DC Output connector 2.5 PI 7.3.3 Inverter Description (4 Lamp) Symbol Description Min Typ Max Unit V IND 10.8 12 13.2 V I IND - 1.45 1.55 A Fs 60 70 80 KHz Cout1 3.0 8.3 8.8 marms V OPEN 1.4 - - KVrms - 10 -
8. Setup for Operation The OSD (On Screen Display) provides certain functions to have clear image and others. The board supports 2 buttons OSD operation as a standard. The control functions defined on OSD operation are as below. 8.1 Function on OSD Menu OSD MENU Auto Adjustment Horizontal Position Vertical Position Horizontal Size (Clock) Phase Brightness Contrast Color Gamma Sharpness Language Information Miscellaneous Auto Color Adjust Translucent Reset Power Light Auto Search Description Automatically adjust the Horizontal position, Vertical position, Horizontal size, and Phase Windows s background or characters should be display on your Full screen prior to proceed this function. Adjust the horizontal position of the screen s image Adjust the vertical position of the screen s image Adjust the horizontal size of the screen s image Adjust the focus of the screen s image Adjust the brightness of the screen Adjust the contrast of the screen 9300 and 6500 Temperature and user Temperature, Red, Green & Blue Globally setting that luminance of the screen Adjust the Sharpness of the screen Select one of the Six language (Korean, English, French, German, Italian, Spanish,) Supported preset mode Factory Preset, ODS Horizontal / Vertical Position, OSD Display Time Automatically adjust the color of the screen s image Transparency adjust of the OSD windows Initializing that memory in store of the user mode Light adjust according to selecting mode Automatically search the channel - 11 -
8.2 Hotkey Function Definition OSD KEY LEFT RIGHT DOWN UP SELECT Function Volume Volume Power Light (In case of TV the Channel Down) Auto adjust (Exception of DVI Mode), (In case of TV the Channel UP) Mode Change. - 12 -
9. APPLICABLE GRAPHIC MODE The microprocessor measures the H-sync, V-sync and V-sync/H-sync polarity for RGB inputs, and uses this timing information to control all of the display operation to get proper image on a screen. This board can detect all VESA standard and MAC Graphic modes shown on the table below and provide more clear and stable image on a screen. Table 9.1 ) RGB Input format Spec Pixel Freq. Sync Polar Horizontal Timing Freq. Total Active - 13 - Sync Polar Vertical Timing Freq. Total Active Mode MHz KHz Pixel Pixel Hz Line Line 640 x 350 25.144 @70Hz VESA P 31.430 800 640 N 70.000 449 350 720 x 400 28.287 @70Hz VESA N 31.430 900 720 P 70.000 449 400 640 x 480 25.175 @60Hz MAC N 31.469 800 640 N 59.940 525 480 640 x 480 25.175 @60Hz VESA N 31.469 800 640 N 59.940 525 480 640 x 480 30.240 @67Hz MAC N 35.000 864 640 N 66.667 525 480 640 x 480 31.500 @72Hz VESA N 37.861 832 640 N 72.809 520 480 640 x 480 31.500 @75Hz VESA N 37.500 840 640 N 75.000 500 480 832 x 624 57.284 @75Hz MAC N 49.726 1152 832 N 74.551 667 624 800 X 600 36.000 @56Hz VESA P 35.156 1024 800 P 56.250 625 600 800 X 600 40.000 @60Hz VESA P 37.879 1056 800 P 60.317 628 600 800 X 600 50.000 @72Hz VESA P 48.077 1040 800 P 72.188 666 600 800 X 600 49.500 @75Hz VESA P 46.875 1056 800 P 75.000 625 600 1024 X 768 65.000 @60Hz VESA N 48.363 1344 1024 N 60.005 806 768 1024 X 768 64.000 @60Hz MAC N 48.780 1312 1024 N 60.001 813 768 1024 X 768 75.000 @70Hz VESA N 56.476 1328 1024 N 70.070 806 768 1024 X 768 80.000 @75Hz MAC N 60.241 1328 1024 N 74.927 804 768 1024 X 768 78.750 @75Hz VESA P 60.023 1312 1024 P 75.030 800 768 1280 X 1024 108.000 @60Hz VESA P 63.981 1688 1280 P 60.020 1066 1024 1280 X 1024 135.000 @75Hz VESA P 79.976 1688 1280 P 75.025 1066 1024
10. APPENDIX This board can support various LCD panel, which has VGA, XGA, and SXGA resolution. The table below shows the model names of LCD panel, jumper setting for LCD power for each LCD panel that can work with this B/D, up to the updated date and we will try continuously to add the model names of the LCD panel that have been tested. LCD Panel Setting List No Panel Size LCD Maker Model Name Remarks 1 6.4 inch Prime View V16C6448AC,AE,AF 2 8.4 inch AU-Optronics B084SN01,SN02,SN03 3 Mitsubishi AA084VC02,VC05 4 Toshiba LTM08C351A,LTM084P363 5 10.4 inch AU-Optronics B104SN01,SN02,SN03 6 NEC NL6448AC33-18,NL6448AC33-29 NL6448BC33-46,NL8060BC26-17 7 Toshiba LTM10C209H,LTM10C306L 8 SAMSUNG LTA104S2-L01,L02 9 Sharp LQ104V1DG51,DG52 10 12.1 inch AU-Optronics G121SN01 11 LG LB121S1-A2 12 NEC NL8060AC26-02,NL8060BC26-13 NL8060BC26-17 13 Toshiba LTM12C275A,LTM12C289 14 15 inch AU-Optronics B150XG01,M150XN07 G150XG01 15 CPT 150XP01,XP03 16 17 inch AU-Optronics M170EG01,M170EN05 M170EN06 17 CPT 170EA07,170EA03 18 19 inch AU-Optronics M190EN02,EN03,EN04 19 CPT 190EA03-14 -