SDI EXENSION - Xtreme G Series SDI EXENSION - SDI Xtreme G Series SDIXtreme G G SDI Fiber Optic Extension Multi-standard operation from 0 mbit/s to Gbit/s SMPE M, M, M, and M compliant Supports HD/SD-SDI inputs with embedded audio and ancillary data Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber he Logical Solution - Serial Digital Interface Extension he SDI Xtreme G product series is a compact, broadcast quality, SDI over fiber extension system. he system is designed to transmit SD, HD, and G SDI signals with or without embedded audio and data, as well as DVB/ASI at 0 mbit/s. In addition, this fiber based transport system gives users the assurances that each signal is immune to video pathological signals over the entire length of the fiber interconnect. he system also supports either single or multimode fiber, and is SMPE M, M, M, and M compliant. he SDI Xtreme G provides industry leading performance and reliable media conversion for a wide variety of applications. herefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video production and editing, (ENG) sports tele-production, field production, cross-town fiber links, cross on campus production, pre fibered venues, courtesy feeds and many more. tm
SDI EXENSION - SDI Xtreme G Series he System he reliability of the SDI Xtreme G stems from the quality of its design and construction, with advanced integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through is also provided on the transmitter and re-clocked SDI outputs are provided on the receiver. hese key features provide assurance that the signal is equalized and re-clocked prior to fiber transmission; therefore it retains all of the signals initial parameters allowing for pristine output. In addition, front panel status LEDs indicate system activity and link activity. Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber, making this a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. In addition, the SDI Xtreme G is fully compatible with hinklogical's VX outer line of products. ypical application extending SDI video using SDI Xtreme G Local Video Fiber SDI Video Power SDIXtreme G ransmitter OU PW IN G SDI Fiber Optic Extension ANSMIE PW HD LOCK OU Fiber Connection up to 0 km. ( miles) Power Supply (required) emote Video SDI Equipment SDIXtreme G eceiver OU PW PW HD LOCK OU G SDI Fiber Optic Extension ECEIVE IN Power Supply SDI Display
0 ALAM POWE POWE POWE POWE POWE POWE POWE POWE ACIVE ACIVE POWE POWE POWE POWE POWE POWE POWE POWE 0 0 0 0 0 0 0 I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD FAUL USB LAN ESE CONSOLE S- FAUL USB LAN CONSOLE S- 0 0 0 0 CONOLLE CONOLLE I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD I/O CAD 0 0 0 0 OU HD PW IN OU SDI SDI EXENSION VIDEO EXENSION - SDI - Xtreme Xtreme G - G Series Series Key Features Multi-standard operation from 0 mbit/s to Gbit/s Supports HD/SD-SDI inputs with embedded audio and ancillary data Signals are equalized and re-clocked on the receiver Equalized and re-clocked SDI loop through on the transmitter Signal transmission via fiber optic cable; no F interference Supports both single mode and multi-mode fiber types SMPE M, M, M, and M compliant Cable equalization on inputs and cable drivers on outputs to ensure signal integrity db Optical Link Budget @. Gbps Hot Swappable/Pluggable SFP optics with LC connectors Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber Supports pathological patterns at all rates HD, SD, G SDI Source HD, SD, G SDI Loop hrough OU PW PW HD LOCK IN SDI Xtreme G G SDI Fiber Optic Extension ANSMIE SDI Xtreme G ransmitter OU Fiber Cable hinklogical s VX 0 outer Extension up to 0 km. SDI Xtreme G eceiver UPSEAM DOWNSEAM CONOL UPSEAM DOWNSEAM PW LOCK SDIXtreme G G SDI Fiber Optic Extension ECEIVE SDI Equipment/Display
SDI SDI EXENSION - Xtreme - G G Series Specifications VIDEO EXENSION - Series SPECIFICAIONS Indicators: Dimensions: Weight: Power: Operating emperature: () Power, Data ate HD, SD Lock Detect. x. x.0 (in). x. x. (mm) lb. ( 0. kg.) - VDC @< AMP -º C to +0º C ANSMIE Specifications: ALL FIBE SPECS EFLEC SINGLE-MODE FIBE Number of Inputs Data ate ange 0Mbps to. Gbps Supported Standards SMPE M,,, M DVB-ASI e-clocked Data ates 0 Mbps (SMPE M, DVB-ASI-0),. Gbps (SMPE ),. Gbps (SMPE M) Equalization Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss >db up to. Gbps Number of Outputs ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Output Connector LC receptacle Wavelength nm (nominal) Emmiter ype FP Laser Output Power (nominal) -.0 dbm at 0 Mbps; -.0 dbm at. Gbps; -.0 dbm at. Gbps e-clocking At 0 Mbps,. Gbps &. Gbps ECEIVE Specifications: ALL FIBE SPECS EFLEC SINGLE-MODE FIBE Fiber Input Connector LC receptacle Wavelength 0 - nm Minimum Input Sensitivity - dbm at. Gbps; - dbm at. Gbps Maximum Input Power 0 dbm Number of Outputs ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal
SDI SDI EXENSION - SDI - Xtreme G Series SDI Xtreme G - Ordering Information SDI XEME G: SINGLE MODE Part Number and Description SDI-000S0-LCX SDI-000S0-LCX SDI Xtreme G Fiber Optic Extender eceiver, Single Mode, LC SDI Xtreme G Fiber Optic Extender ransmitter, Single Mode, LC SDI FIBE OPIC EXENDE OPICS OPIONS for SINGLE MODE VOP-S SDI Xtreme G Optics Option for eceiver, Single Mode, Single Fiber, LC VOP-S0 SDI Xtreme G Optics Option for ransmitter, Single Mode, Single Fiber, LC SDI XEME G: MULI-MODE Part Number and Description SDI-000M0-LCX SDI Xtreme G Fiber Optic Extender eceiver, Multi-Mode, LC SDI-000M0-LCX SDI Xtreme G Fiber Optic Extender ransmitter, Multi-Mode, LC SDI FIBE OPIC EXENDE OPICS OPIONS for MULI-MODE VOP-M SDI Xtreme G Optics Option for eceiver, Multi-Mode, Single Fiber, LC VOP-M SDI Xtreme G Optics Option for ransmitter, Multi-Mode, Single Fiber, LC 00 hinklogical. All rights reserved. hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical. tm 0 Washington Street Contact a hinklogical Sales epresentative at Milford, C 00 USA sales@thinklogical.com or (0) -00
SDI EXENSION - Xtreme G Series SDI EXENSION - SDI Xtreme G+ Series SDIXtreme G+ G SDI Fiber Optic Extension - Dual Model Extends SDI signals over two fibers - Each fiber supports two SD/HD signals or one G signal - Providing a total support of up to four SD/HD or two G signals S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Multi-standard operation from 0 mbit/s to Gbit/s SMPE M, M, M, M, level A and B compliant Supports G/HD/SD SDI inputs with embedded audio and ancillary data Additional options for the transmitter component include loop-out, or dual channel, which provides two muliplexed (. Gbps) signals transmitted and received over a single fiber Uses standard SFP+ optics with LC connectors - does not require costly SFP+ pathological modules ransceiver model available for bi-directional video extension Auto detects input video format and displays on LEDs he Logical Solution - Dual Serial Digital Interface Extension he SDI Xtreme G+ product series is a compact, broadcast quality, SDI over fiber extension system. he dual system is designed to transmit up to four SD/HD or two G SDI signals with or without embedded audio and data, and is SMPE M, M, M, M and level A and B compliant. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. he system also supports either single or multi-mode fiber, and is fully compatible with hinklogical s VX and HDX outer line of products. he SDI Xtreme G+ provides industry leading performance and reliable media conversion for a wide variety of applications. herefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video production and editing, sports tele-production, field production, cross-town fiber links, cross on campus production, prefibered venues, courtesy feeds and many more.
SDI EXENSION - SDI Xtreme G+ Series he System he reliability of the SDI Xtreme G+ stems from the quality of its design and construction, with advanced integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through is also provided on the transmitter. hese key features provide assurance that the signal is equalized and re-clocked prior to fiber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI outputs on the receiver. he dual chassis model houses two separate SDI Xtreme G+ units, providing multiple combinations of transmitter and receiver possiblities. Status LEDs indicate system activity and link activity. Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber, making this a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot swappable/pluggable with LC connectors. An S- connector provides a full duplex channel to send/receive data, making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio players/recorders. he system provides transmitter and receiver models as well as a transceiver model for bi-directional video extension. ypical application extending SDI video using SDI Xtreme G+ Dual Model (X/X System)
SDI SDI EXENSION VIDEO EXENSION - SDI - Xtreme Xtreme G - G+ Series Series Key Features Extension of up to four SD/HD signals or two G SDI signal over a single fiber Multi-standard operation from 0 mbit/s to Gbit/s Supports G/HD/SD SDI inputs with embedded audio and ancillary data S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Signal transmission via fiber optic cable; no F interference SMPE M, M, M, M and level A and B compliant Cable equalization on inputs and cable drivers on outputs to ensure signal integrity Supports pathological patterns at all rates ransceiver model available for bi-directional video extension Equalized and re-clocked SDI loop through on the transmitter Additional options for the transmitter component include loop-out, or dual channel, which provides two muliplexed (. Gbps) signals transmitted and received over a single fiber Signals are recovered and re-clocked on the receiver Low Cost - Hot Swappable/Pluggable standard SFP+ optics with LC connectors Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber Support for standard. (G),. (HD), 0 (SD), and fractional /.00 rates Compatible with all hinklogical VX and HDX outers Auto detects input video format and displays on LEDs ypical application extending SDI video using SDI Xtreme G+ (ransceiver System)
SDI SDI EXENSION - Xtreme - G+ Series Specifications VIDEO EXENSION - Series SPECIFICAIONS Indicators: Dimensions: Weight: Power: Operating emperature: () Power, Data ate SD, HD, G Lock Detect - Active Height:.0 (. cm) Depth:. (. cm) Width:.0 (. cm) <lb (0.kg) each Shipping Weight: lb (.kg) pair - VDC @< AMP -º C to +0º C ANSMIE Specifications: Number of SDI Inputs - Data ate ange 0Mbps to. Gbps Supported Standards SMPE M, M, M, M and level A and B compliant e-clocked Data ates 0 Mbps (SMPE M),. Gbps (SMPE ),. Gbps (SMPE M) Equalization Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss >db up to. Gbps Number of Loop Outs - Number of Optical Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Output Connector LC receptacle Fiber ype Multi-mode Single mode Wavelength (nominal) 0nm nm Emmiter ype VCSEL DFB Laser Output Power (nominal) -dbm -.dbm e-clocking At 0 Mbps,. Gbps &. Gbps ECEIVE Specifications: Fiber Input Connector LC receptacle Fiber ype Multi-mode Single mode Wavelength 0 0nm 0-0nm Minimum Input Sensitivity -dbm -dbm Maximum Input Power 0 dbm 0.dBm Number of SDI Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal
SDI SDI EXENSION - SDI - Xtreme G+ Series Series
SDI EXENSION - SDI Xtreme G+ Series SDI EXENSION - SDI Xtreme G+ Series
SDI EXENSION - SDI Xtreme G+ Series 0 hinklogical. All rights reserved. hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical.! " # $ % & ' ( ) '
SDI EXENSION - Xtreme G Series SDI EXENSION - SDI Xtreme G+ Series SDIXtreme G+ M G SDI Fiber Optic Extension - ack Mount Model Four SDI components combined in one rack mount unit Each module provides S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Each module extends SDI signals over a single fiber - Supporting two SD/HD signals or one G signal - Providing a total support of up to eight SD/HD or four G signals (as well as dual-link SDI) ack unit is comprised of four modules. Any combination of transmitter/receiver is possible. Features hot-swappable, current sharing power supply modules SMPE M, M, M, M, level A and B compliant Provides front panel status monitoring Auto detects input video format and displays on LEDs he Logical Solution - ack Mount - Serial Digital Interface Extension he SDI Xtreme G+ product series is a compact, broadcast quality, SDI over fiber extension system. he rack mount system is a U chassis which houses four separate SDI modules, each of which supports two SD/HD signals or one G signal (as well as dual-link SDI). his enables users to transmit up to eight SD/HD or four G SDI signals with or without embedded audio and data. Depending on the infrastructure, the SDI Xtreme G+ can distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. he SDI Xtreme G+ is a total system solution providing industry leading performance and full compatibility with hinklogical s VX and HDX outer line of products. Providing reliable media conversion for a wide variety of applications it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video production and editing, sports tele-production, field production, cross-town fiber links, cross on campus production, pre fibered venues, courtesy feeds and many more.
SDI EXENSION - SDI Xtreme G+ Series he System he SDI Xtreme G+ M has a versatile component design which allows the unit to be used in a variety of application designs, as either a transmitter, receiver, or the slots may be mixed for flexible configurations (as a transceiver). his makes it an ideal rack mount solution for the extension of SDI signals to multiple locations. All SDI interface modules are hot-swappable, and each has its own S- port for remote camera operations (such as pan, tilt and zoom), and access to video and audio players/recorders. he reliability of the SDI Xtreme G+ stems from the quality of its design and construction, with advanced integrated re-clocking circuitry designed into the components. Equalized and re-driven SDI loop-through is also provided on the transmitter. hese key features provide assurance that the signal is equalized and re-clocked prior to fiber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI outputs on the receiver. Additional options for the transmitter component include loop-out, or dual channel, which provides two multiplexed (. Gbps) signals transmitted and received over a single fiber. Front panel user interface provides high availability with all of the essential features, such as status monitoring and link activity, for mission critical environments. System architecture provides hot-swappable, current sharing power supply modules, a critical component in high up-time environments which typically are supported by more than one power grid as a failover option. In the unlikely event that a power module fails, there is no interruption to the component because they are both working all the time. In addition, a dry contact annunciator provides an alarm warning in the event of a power failure or a unit overheating and a replacement may be installed with minimal downtime. Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber, making this a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. In addition, the standard SFP+ optics (with LC connectors) are hot swappable/pluggable. Back View of SDI Xtreme G+ ack Mount Unit - All modules are hot-swappable
SDI SDI EXENSION VIDEO EXENSION - SDI - Xtreme Xtreme G - G+ Series Series Key Features Four SDI components combined in one rack mount unit - Any combination of transmitter/receiver is possible. Extends SDI signals over a single fiber - Each fiber supports two SD/HD signals or one G signal - Providing a total support of up to eight SD/HD or four G signals (as well as dual-link SDI) S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber Features hot-swappable, current sharing power supply modules SMPE M, M, M, M, level A and B compliant Multi-standard operation from 0 mbit/s to Gbit/s Supports G/HD/SD SDI inputs with embedded audio and ancillary data Signals are recovered and re-clocked on the receiver Equalized and re-clocked SDI loop through on the transmitter Signal transmission via fiber optic cable; no F interference Cable equalization on inputs and cable drivers on outputs to ensure signal integrity Supports pathological patterns at all rates Support for standard. (G),. (HD), 0 (SD), and fractional /.00 rates Compatible with all hinklogical VX and HDX outers Provides front panel status monitoring Auto detects input video format and displays on LEDs SPECIFICAIONS Dimensions: ack Size: EIA " Height: U-. (.0 cm) Depth:.0" (. cm) Width:." (. cm) (olerance: ±.0";.0cm) Weight: lbs (. kg) per unit Shipping Weight: 0 lbs (. kg) pair Power Consumption 0 watts per unit Supply Voltage 0-0 VAC, - Hz, Universal AC Power Supplies Operating emperature: 0-0 C; ( - F)
SDI SDI EXENSION - Xtreme - G+ Series Specifications VIDEO EXENSION - Series ANSMIE Specifications (individual interface component): Number of SDI Inputs - Data ate ange 0Mbps to. Gbps Supported Standards SMPE M, M, M, M and level A and B compliant e-clocked Data ates 0 Mbps (SMPE M),. Gbps (SMPE ),. Gbps (SMPE M) Equalization Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss >db up to. Gbps Number of Loop Outs - Number of Optical Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Output Connector LC receptacle Fiber ype Multi-mode Single Mode Wavelength (nominal) 0nm nm Emmiter ype VCSEL DFB Laser Output Power (nominal) -dbm -.dbm e-clocking At 0 Mbps,. Gbps &. Gbps ECEIVE Specifications (individual interface component): Fiber Input Connector LC receptacle Fiber ype Multi-mode Single Mode Wavelength 0 0nm 0-0nm Minimum Input Sensitivity -dbm -dbm Maximum Input Power 0 dbm 0.dBm Number of SDI Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal
SDI SDI EXENSION - SDI - Xtreme G+ Series Series ypical application extending SDI video using SDI Xtreme G+ M
SDI EXENSION -- SDI Xtreme G+ Series SDI Xtreme G+ M - ack Mount Ordering Information SDI-0000X SDI Xtreme G Plus ack Mount Chassis * + 0 hinklogical. All rights reserved. hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical.! " # $ % & ' ( ) '
SDI EXENSION - Xtreme G Series SDI EXENSION - SDI Xtreme G+ Series SDIXtreme G+ G SDI Fiber Optic Extension Extends SDI signals over fiber - A single fiber supports two SD/HD signals or one G signal S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Multi-standard operation from 0 mbit/s to Gbit/s SMPE M, M, M, M, level A and B compliant Supports G/HD/SD SDI inputs with embedded audio and ancillary data Additional options for the transmitter component include loop-out, or dual channel, which provides two multiplexed (. Gbps) signals transmitted and received over a single fiber Uses standard SFP+ optics with LC connectors - does not require costly SFP+ pathological modules Auto detects input video format and displays on LEDs he Logical Solution - Serial Digital Interface Extension he SDI Xtreme G+ product series is a compact, broadcast quality, SDI over fiber extension system. he system is designed to transmit up to two SD/HD signals or one G SDI signal with or without embedded audio and data, and is SMPE M, M, M, M and level A and B compliant. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. he system also supports either single or multimode fiber, and is fully compatible with hinklogical s VX and HDX outer line of products. he SDI Xtreme G+ provides industry leading performance and reliable media conversion for a wide variety of applications. herefore, it is an ideal solution for Pro A/V, broadcast, and corporate studio applications, including video production and editing, sports tele-production, field production, cross-town fiber links, cross on campus production, pre fibered venues, courtesy feeds and many more.
SDI EXENSION - SDI Xtreme G+ Series he System he reliability of the SDI Xtreme G+ stems from the quality of its design and construction, with advanced integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through is also provided on the transmitter. hese key features provide assurance that the signal is equalized and re-clocked prior to fiber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI outputs on the receiver. Additional options for the transmitter component include loop-out, or dual channel, which provides two multiplexed (. Gbps) signals transmitted and received over a single fiber. Status LEDs indicate system activity and link activity. Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber, making this a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot swappable/pluggable with LC connectors. An S- connector provides a full duplex channel to send/receive data, making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio players/recorders. he system provides transmitter and receiver models as well as a transceiver model for bi-directional video extension. ypical application extending SDI video using SDI Xtreme G+ - with Loop Out Option - X/X System
SDI SDI EXENSION VIDEO EXENSION - SDI - Xtreme Xtreme G - G+ Series Series ypical application extending SDI video using SDI Xtreme G+ - with wo Input/Multiplexed Option - X/X System * * nd fiber utilized for S camera control Key Features Extension of up to two SD/HD signals or one G SDI signal over a single fiber Multi-standard operation from 0 mbit/s to Gbit/s Supports G/HD/SD SDI inputs with embedded audio and ancillary data S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Signal transmission via fiber optic cable; no F interference SMPE M, M, M, M and level A and B compliant Cable equalization on inputs and cable drivers on outputs to ensure signal integrity Supports pathological patterns at all rates ransceiver model available for bi-directional video extension Equalized and re-clocked SDI loop through on the transmitter Additional options for the transmitter component include loop-out, or dual channel, which provides two muliplexed (. Gbps) signals transmitted and received over a single fiber Signals are recovered and re-clocked on the receiver Low Cost - Hot Swappable/Pluggable standard SFP+ optics with LC connectors Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber Support for standard. (G),. (HD), 0 (SD), and fractional /.00 rates Compatible with all hinklogical VX and HDX outers Auto detects input video format and displays on LEDs
SDI SDI EXENSION - Xtreme - G+ Series Specifications SPECIFICAIONS Indicators: Dimensions: Weight: Power: Operating emperature: VIDEO EXENSION - Series () Power, Data ate SD, HD, G Lock Detect - Active Height:. (.cm) Depth:. (.cm) Width:.0 (. cm) <lb (0.kg) each Shipping Weight: lb (.kg) pair - VDC @< AMP -º C to +0º C ANSMIE Specifications: Number of SDI Inputs - Data ate ange 0Mbps to. Gbps Supported Standards SMPE M, M, M, M and level A and B compliant e-clocked Data ates 0 Mbps (SMPE M),. Gbps (SMPE ),. Gbps (SMPE M) Equalization Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss >db up to. Gbps Number of Loop Outs - Number of Optical Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Output Connector LC receptacle Fiber ype Multi-mode Single Mode Wavelength (nominal) 0nm nm Emmiter ype VCSEL DFB Laser Output Power (nominal) -dbm -.dbm e-clocking At 0 Mbps,. Gbps &. Gbps ECEIVE Specifications: Fiber Input Connector LC receptacle Fiber ype Multi-mode Single Mode Wavelength 0 0nm 0-0nm Minimum Input Sensitivity -dbm -dbm Maximum Input Power 0 dbm 0.dBm Number of SDI Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal
SDI SDI EXENSION - SDI - Xtreme G+ Series Series 0 hinklogical. All rights reserved. hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical.! " # $ % & ' ( ) '
MODULA K EXENSION - SDI XtremeG+ Extend Four SD/HD-SDI Inputs or wo G-SDI Inputs SDI XtremeG+ Modules - ransmitter and eceiver Fiber Optic Video Extension Supporting SMPE K Standards he SDI XtremeG+ extends K signals from four SD/HD-SDI inputs or two G-SDI inputs over a single fiber, with no compression, latency, artifacts or lost frames. he SDI XtremeG+ is ideally suited for entertainment, medical, events and staging applications requiring high resolution K video, such as K filming, projection and camera connectivity, video editing, video analysis and simulation. Product Features Low fiber footprint cost saving and easy to integrate - Extend four SD/HD-SDI signals or two G-SDI over a single fiber Modules are space saving and flexible - Small form factor each module is ¼U - Modules and optics are hot-swappable High performance - Industry leading bandwidth -.Gbps - Synchronized signals - No data loss - No compression S- for control Full family of compatible.gbps routers - VX outers, scalable from to 0 ports - MX outer, compact U chassis, scalable from to ports
MODULA MODULA KVM EXENSION KVM K EXENSION EXENSION - Velocitykvm - - SDI - XtremeG+ Series 00 Specifications Operating emp.: Humidity: Dimensions: Power Consumption: Optical Cable: Optical Distance: Compliance: Warranty: 0-0 C; ( - F) -% H, non-condensing Height:. (0. mm) Depth:." (. mm) Width:. (.0 mm) (tolerance: ±.0";.00 mm) Weight:. lbs (0. kg) per unit Shipping Weight: lbs (.0 kg) watts per plug-in module Single-mode and multi-mode over one or two fibers, second fiber required for S- Fiber is available, not supplied Up to 0 meters using./um, type OM; Up to 0 meters using 0/um, type OM Up to 0 meters using 0/um, type OM; Up to 00 meters using 0/um, type OM; Up to 0 kilometers using /um, type OS (single-mode) Approvals for US, Canada and European Union months from date of shipment - Extended warranties available ANSMIE Specifications (Individual Interface Component): Number of SDI Inputs: when used as two G-SDI inputs when used as four SD/HD-SDI inputs Data ate ange: 0Mbps to. Gbps Supported Standards: SMPE M, M, M, M and level A and B compliant e-clocked Data ates: 0 Mbps (SMPE M),. Gbps (SMPE ),. Gbps (SMPE M) Equalization: Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss: >db up to. Gbps Optical Fiber Output Connector: LC Fiber ype: Multi-Mode Single Mode Wavelength (nominal): 0nm nm Emmiter ype: VCSEL DFB Laser Output Power (nominal): -dbm -.dbm ECEIVE Specifications (Individual Interface Component): Number of SDI Outputs: when used as two G-SDI outputs when used as four SD/HD-SDI outputs Signal Level: 00mV ± % DC Offset: 0V ± 0.V Overshoot: < % of amplitude iming Jitter: < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter: < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Fiber Input Connector: LC Fiber ype: Multi-Mode Single Mode Wavelength: 0 0nm 0-0nm Minimum Input Sensitivity: -dbm -dbm Maximum Input Power: 0 dbm 0.dBm Ordering Information: SDM-MX-LCX SDI XtremeG+ ransmitter, Four SD/HD-SDI or wo G-SDI Inputs,.Gbps, S-, LC SDM-MX-LCX SDI XtremeG+ eceiver, Four SD/HD-SDI or wo G-SDI Outputs,.Gbps, S-, LC One optics package required per module. VOP-M - Multi-mode Optics Package for SDI XtremeG+, ransmitter and eceiver, 00 meters Each module requires chassis support. Chassis sold separately. VQS-0000 Q-Series 00 Chassis, Supports a single module per chassis VQS-0000 Q-Series 00 Chassis, Supports up to two modules per chassis VQS-0000 Q-Series 00 Chassis, Supports up to four modules per chassis, edundant power supplies VS-Q000 -Series Q-00 Chassis, Supports up to two modules per chassis, plus an additional KVM -Series module, edundant power supplies For more information contact a hinklogical Sales epresentative at sales@thinklogical.com or (0) -00 or visit 0 hinklogical. All rights reserved. Number of Loop Outs: when used as two G-SDI inputs 0 when used as four SD/HD-SDI inputs Number of Optical Outputs: Signal Level: 00mV ± % DC Offset: 0V ± 0.V Overshoot: < % of amplitude iming Jitter: < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter: < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal ise/fall ime: < ps at. Gbps per SMPE M; < 0 ps at. Gbps per SMPE ; 0. ns to. ns at 0 Mbps per SMPE M e-clocking: At 0 Mbps,. Gbps &. Gbps ise/fall ime: < ps at. Gbps per SMPE M; < 0 ps at. Gbps per SMPE ; 0. ns to. ns at 0 Mbps per SMPE M e-clocking: At 0 Mbps,. Gbps &. Gbps hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical.
MODULA VIDEO EXENSION - Q-Series SDI Xtreme G+ Module SDIXtreme G+ SDI Xtreme G+ Module Supporting two SD/HD signals or one G signal S- port for device control Fiber Options Include: Single-Mode Multi-Mode Q-Series SDI Xtreme G+ Module (transmitter shown) Extend SDI and S- signals up to 0 Kilometers he SDI Xtreme G+ is an interface option designed for use in the Q-Series 00 modular chassis (Q-00 sold separately). his module enables users to transmit up to two SD/HD signals or one G SDI signal with or without embedded audio and data, and is SMPE M, M, M, M and level A and B compliant. Using multi-mode or single-mode fiber, it allows users to locate a SDI monitor from just a few meters up to 0 kilometers ( miles) away from the controlling computer securely and without the loss of resolution. In addition, this fiber based transport system gives users the assurance that each signal is immune to video pathological signals over the entire length of the fiber interconnect, while supporting all pathological patterns at all rates. he SDI Xtreme G+ module provides industry leading performance and reliable media conversion for a wide variety of applications. herefore, it is an ideal solution for commerical A/V, broadcast, and corporate studio applications, including video production and editing, sports tele-production, field production, cross-town fiber links, cross on campus production, pre fibered venues, courtesy feeds and many more.
MODULA MODULA VIDEO EXENSION KVM EXENSION KVM - EXENSION Q-Series - Velocitykvm SDI - Xtreme - G+ Series Module 00 Module Features he reliability of the SDI Xtreme G+ module stems from the quality of its design and construction, with advanced integrated re-clocking circuitry designed into the transmitter and receiver. Equalized and re-driven SDI loop-through is also provided on the transmitter. hese key features provide assurance that the signal is equalized and re-clocked prior to fiber transmission; therefore it retains all of the signals initial parameters allowing for pristine re-clocked SDI outputs on the receiver. Installation possibilities are expanded with built-in support for either multi-mode or single mode fiber, making this a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances. In addition, the standard SFP+ optics are hot swappable/pluggable with LC connectors. An S- connector provides a full duplex channel to send/receive data, making it ideal for remote camera operations (such as pan, tilt and zoom), and access to video and audio players/recorders. Designed for use in the Q-00 chassis (sold separately) Extends SDI signals over a single fiber - Each fiber supports two SD/HD signals or one G signal SMPE M, M, M, M, level A and B compliant S- port for device control - Ideal for remote camera operations requiring pan, tilt and zoom functions Distribute uncompressed broadcast quality signals over single mode fiber up to 0 km. ( miles) and up to 00 meters over multi-mode fiber Multi-standard operation from 0 mbit/s to Gbit/s Auto detects input video format and displays on LEDs Single-mode or multi-mode fiber options extend signals up to: - 0 meters using multi-mode fiber type OM - 0 meters using multi-mode fiber type OM - 00 meters using multi-mode fiber type OM - 0 kilometers ( miles) using single-mode fiber Supports G/HD/SD SDI inputs with embedded audio and ancillary data Signals are recovered and re-clocked on the receiver Equalized and re-clocked SDI loop through on the transmitter Signal transmission via fiber optic cable; no F interference SMPE compliant cable equalization on inputs and cable drivers on outputs to ensure signal integrity Supports pathological patterns at all rates Support for standard. (G),. (HD), 0 (SD), and fractional /.00 rates Compatible with all hinklogical SDI Xtreme G+ (stand alone) extenders, VX and HDX outers
MODULA VIDEO EXENSION - Q-Series VIDEO SDI EXENSION Xtreme G+ - Series Module he Modular DVI, SDI, Audio, Serial, and Network Extension System Ideal ack Space Saving Solution he Q-00 chassis has a versatile modular design which is equipped with quad, hot-swappable interface modules. his flexible design of the chassis makes it an ideal solution for a variety of applications, serving as a transmitter, receiver, or even a transceiver. Q-00 chassis module options include (all modules sold separately): Velocitydvi Module : One single-link DVI display Velocitydvi Module A/V+: One single-link DVI display, full duplex stereo audio, serial (S-) Velocitydvi Module A/N+: One single-link DVI display, full duplex stereo audio, network Velocitydvi Module : One dual-link DVI display Velocitydvi Module A/V+: One dual-link DVI display, full duplex stereo audio, serial (S-) Velocitydvi Module A/N+: One dual-link DVI display, full duplex stereo audio, network SDI Xtreme G+ Module: wo SD/HD signals or one G signal, serial (S-) Q-00 Chassis Equipped with Four SDI Xteme G+ Interfaces System Application Example Application Description: Four functional SDI sources each connected to the Q-00 chassis equipped with four SDI Xtreme G+ transmitter interface module components, which extends SDI video and S- signals to one Q-00 receiver chassis equipped with with four SDI Xtreme G+ receiver interface module components. Signals are routed through the hinklogical HDX router.
MODULA VIDEO EXENSION - Q-Series SDI Xtreme G+ Module VIDEO EXENSION - Series ANSMIE Specifications (individual interface component): Number of SDI Inputs - Data ate ange 0Mbps to. Gbps Supported Standards SMPE M, M, M, M and level A and B compliant e-clocked Data ates 0 Mbps (SMPE M),. Gbps (SMPE ),. Gbps (SMPE M) Equalization Automatic up to 0m of Belden A at.0 Gbps, 0m at. Gbps and 0m at 0 Mbps eturn Loss >db up to. Gbps Number of Loop Outs - Number of Optical Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Optical Output Connector LC receptacle Fiber ype Multi-mode Single-mode Wavelength (nominal) 0nm nm Emmiter ype VCSEL DFB Laser Output Power (nominal) -dbm -.dbm e-clocking At 0 Mbps,. Gbps &. Gbps ECEIVE Specifications (individual interface component): Fiber Input Connector LC receptacle Fiber ype Multi-mode Single-mode Wavelength 0 0nm 0-0nm Minimum Input Sensitivity -dbm -dbm Maximum Input Power 0 dbm 0.dBm Number of SDI Outputs - ise/fall ime < ps at. Gbps per SMPE M; Signal Level 00mV ± % < 0 ps at. Gbps per SMPE ; DC Offset 0V ± 0.V 0. ns to. ns at 0 Mbps per SMPE M Overshoot < % of amplitude e-clocking At 0 Mbps,. Gbps &. Gbps iming Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal Alignment Jitter < 0. UI at 0 Mbps; <.0 UI at. Gbps; < 0. UI at. Gbps with color bar signal
MODULA VIDEO MODULA EXENSION KVM KVM - Q-Series EXENSION SDI - Xtreme - Velocitykvm G+ Series Module - Series SDI Xtreme G+ Module Ordering Information * + 0 hinklogical. All rights reserved. hinklogical, claims or other product information contained in this document are subject to change without notice. his document may not be reproduced, in whole or in part, without the express written consent of hinklogical.! " # $ % & ' ( ) '