EZ-LIGHT S8L General Purpose Indicators ontrolled ccess, Inc. orders this part as S8DLGRYPQ Datasheet D-Operated LED Indicators with One, Two, or Three olors Up to three independent colors in one unit Translucent face appears gray when off to avoid false indication M Euro connector models available for plug and play indication Wide 80º field of view Wide 0 to 0 V dc operating range allows for use in battery powered mobile applications vailable with PNP or NPN input, depending on model IP69K rated to withstand harsh wash-down environments Wide operating range of 0 to +50 ( 0 F to + F) Daylight visible models with a clear cover and more focused light output provide greater visibility in high ambient light conditions Models Table : Standard Models Family olor olor olor Input onnector S8L G R Y P Q MODEL KEY G = Green R = Red Y = Yellow = lue W = White O = Orange T = Turquoise V = Violet M = Magenta X = No color in this position P = PNP N = NPN Q = pin Euro QD lank = meter cable QP = Euro Pigtail QD T = screw terminals Table : Daylight Visible Models Family olor olor olor Input onnector S8DL G R Y P Q MODEL KEY G = Green R = Red Y = Yellow = lue W = White O = Orange X = No color in this position P = PNP N = NPN Q = pin Euro QD lank = meter cable QP = Euro Pigtail QD T = screw terminals Example Model Indicators Input onnector Type S8LGRYP Green, Red, Yellow PNP blank = m cable S8LGXXPQ Green PNP/NPN -pin Euro QD S8LGRXPQP Green, Red PNP Euro Pigtail QD S8LGRYPT Green, Red, Yellow PNP screw terminals NOTE: Single color models should be ordered as PNP models but can be wired for either PNP or NPN input. Original Document 60690 Rev. F 0 pril 0 60690
Wiring Diagrams Multi olor Wiring NPN PNP + + = rown = White = lue = lack = olor = olor = olor Single olor Wiring NPN PNP Specifications Supply and Voltage urrent 0 to 0 V dc at 5 m max. per LED color Indicators LEDs are independently selected;,, or colors, depending on model. For other colors/combinations, contact Factory for availability Standard Models: Entire translucent dome provides even indication viewable from over 80 degrees Daylight Visible Models: lear dome and more focused light provides even brighter indication when used in high ambient light areas Input Response Time Indicator ON/OFF: ms max onstruction UV stabilized polycarbonate housing PT mounting nut max torque. N m (0 lbf in) Nitrile sealing washer onnections -pin Euro-style integral QD (Q), 50 mm (5.9 in) PV pigtail QD (QP), or -wire, m (6.5 ft) PV integral cable, colorcoded screw terminals for up to 6 WG wire, depending on model, screw terminal max. torque 0. N m (.0 lbf in) Environmental Rating Rated IE IP67, and IP69K, per DIN 0050-9. abled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. Indicator side of terminal models meet IP67, and IP69K when installed in an enclosure. Screw connection points meet IP00 Meets UL Type X and when used with a suitable enclosure Operating onditions 0 to 50 ( 0 F to F) Limited to one color on at a time ertifications www.bannerengineering.com - tel: 76-5-6 P/N 60690 Rev. F
Dimensions Max. screw torque 0. Nm [.0 lbf-in] QD Models able Models Terminal Models ordsets -Pin Threaded M/Euro-Style ordsets Model Length Style Dimensions Pinout MQD-06 MQD-5 MQD-0 MQD-50.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Typ. M x ø.5 MQD-06R MQD-5R MQD-0R.8 m (6 ft).57 m (5 ft) 9. m (0 ft) Typ. [.6"] = rown = White = lue = lack MQD-50R 5. m (50 ft) Right-ngle 0 Typ. [.8"] M x ø.5 [0.57"] P/N 60690 Rev. F www.bannerengineering.com - tel: 76-5-6
Mounting rackets ll measurements are listed in millimeters. SM8 Right-angle mounting bracket with a curved slot for versatile orientation -ga. stainless steel 8 mm sensor mounting hole learance for M (#8) hardware 6 0 SMMS8P Flat SMMS series bracket with 8 mm hole rticulation slots for 90+ rotation -ga. (.6 mm) cold-rolled steel 5 Hole center spacing: = 6.0, to =.0 Hole size: = 6.8 7.0, = ø 6.5, = ø 9.0 78 Hole center spacing: to =. Hole size: = ø.6, = 7.0.6, = ø 8.5 SM8F.. Protective, swivel bracket with tilt and pan movement for precision adjustment Easy sensor mounting to extruded rail T-slots Metric and inch size bolts available Mounting hole for 8 mm sensors SMMS8R Right-angle SMMS series bracket with 8 mm hole rticulation slots for 90+ rotation -ga. (.6 mm) cold-rolled steel Hole center spacing: = 6.0, to =.0 Hole size: = 6.8 7.0, = ø 6.5, = ø 9.0 0 8 5 Hole size: = ø 8. Model SM8F olt Thread () /8-6 in SM8FM0 M0 -.5 50 SM8 8 mm sensor mounting hole Snaps onto 8 mm diameter structural framing = ø 6.9 mm Hole size: = ø 8. 66 LM8FM daptor for mounting the S8L into standard mm holes Includes adaptor, nut, and gasket M8 X 8 www.bannerengineering.com - tel: 76-5-6 P/N 60690 Rev. F
anner Engineering orp Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. www.bannerengineering.com - tel: 76-5-6