WP Series WP Series Wall Plate s/processors This series includes passive and active wall plate devices for interfacing audio, video, s-video and VGA/XGA type signals (and graphics sources of other resolutions) to standards as needed in Presentation and other applications. They can be used with the VPM-2 (page 4.30) or the Frame (on the next page). Passive Devices WA-1N Terminal Block for Balanced Stereo Audio A 6-pole terminal block on both sides of the adapter for connecting balanced stereo audio. WA-2N Dual RCA to Terminal Block A dual RCA to a 6-pole terminal block adapter for connecting a stereo audio signal (single stereo channel). WA-3N Dual Mini Headphone Connector to Terminal Block A dual 3.5mm mini headphone connector to a 6-pole terminal block adapter for connecting dual audio stereo channels. WV-2N Dual BNC to Terminal Block A dual BNC to 6-pole terminal block adapter for connecting two video sources. WAV-2 Terminal Blocks for Component Video and audio A wall plate that has on the front three video inputs (YUV, Composite, YC, RGB) on RCAs and a 3.5mm stereo audio socket. On the back it has terminal block connectors. WAV-1E/EUK - For UK and most of European countries WAV-1E/BG - For Belgium and Germany only WVS-1 Terminal Block for YC and Stereo Audio A wall plate that has on the front a YC (s-video) connector and two RCAs for audio. On the back it has terminal block connectors. WVS-1E/EUK - For UK and most European countries WVS-1E/BG - For Belgium and Germany only WVS-2 Terminal Block for YC, CV and 2 x Stereo Audio A wall plate that has on the front YC (s-video), CV (RCA) and 2 x 3.5mm stereo audio connectors. On the back it has terminal block connectors. WVS-2E/EUK - For UK and most European countries WVS-2E/BG - For Belgium and Germany only WAS-1N 4p + Mini Headphone Connectors to Terminal Block An s-video (on a 4p connector) and a 3.5mm mini headphone connector to two 3-pole terminal block, for connecting s-video and stereo audio. WX-1N HD-15 to Terminal Block (VGA trough UXGA) A HD-15 (VGA through UXGA) connector to a 6 + 2 terminal block connector for connecting a graphics source. The adapter includes a switch for ID bit control. WAV-1N BNC + Mini Headphone Connector to Terminal Block A BNC and a 3.5mm mini headphone connector to the two 3-pole terminal blocks, for connecting video and stereo audio. WXA-1 Terminal Blocks for XGA and Stereo Audio Terminal Blocks for XGA and Stereo Audio component video signals when used with a breakout cable such as the Kramer C-GM/3RVF. A wall plate that has on the front an XGA (HD-15) and a 3.5mm stereo audio connector. On the back it has terminal block connectors. WXA-1E/EUK - For UK and most European countries WXA-1E/BG - For Belgium and Germany only WXV-1 Terminal Block for XGA and Composite Video A wall plate that has on the front an XGA (HD-15) and a CV (RCA) connector. On the back it has terminal block connectors. WXV-1E/EUK - For UK and most European countries WXV-1E/BG - For Belgium and Germany only 6.39
Passive Devices W4545 Double RJ-45 Pass Through WB 45 BNC and RJ-45 Pass Through WRR Double RCA Pass Through WR 45 RCA and RJ-45 Pass Through WBB Double BNC Pass Through W 1145 RJ-11 and RJ-45 Pass Through WBR BNC and RCA Pass Through FRAME WD-2F Female DB-9 to Female DB-9 WD-2M Male DB-9 to Male DB-9 WD-FM Female DB-9 to Male DB-9 WD-MF Male DB-9 to Female DB-9 WX-2F Female VGA to Female VGA WX-2M Male VGA to Male VGA WX-FM Female VGA to Male VGA WX-MF Male VGA to Female VGA 6.40
Multifunctional Passive Wall Plates WXL-1FM Female and Male XLR Audio to Terminal Blocks A wall plate with female and male XLR connectors on the front and terminal block connectors on the back. WXL-FME/E - For UK and most of European countries WXL-FME/B - For Belgium only WXL-FME/G - For Germany only WSP-1 Terminal Blocks for Loud Speakers Connection A 4-pole adapter between loudspeakers cables. Fits into the Frame (see page 6.40). WXL-1F/2F One or two Female XLR Audio to Terminal Blocks A wall plate that has a female (WXL-1F) or two female (WXL-2F) XLR connectors on the front and terminal block connectors on the back. WXL-1F/2FE/E - For UK and most European countries WXL-1F/2FE/B - For Belgium only WXL-1F/2FE/G - For Germany only WXL-1M/2M One or two Male XLR Audio to Terminal Blocks A wall plate that has a male (WXL-1M) or two male (WXL-2M) XLR connectors on the front and terminal block connectors on the back. WXL-1M/2ME/E - For UK and most European countries WXL-1M/2ME/B - For Belgium only WXL-1M/2ME/G - For Germany only 6.41
Active Devices WV-11N Twisted Pair Tramsmitter Video on a BNC connector to a 3-pole terminal block twisted-pair transmitter with video LEVEL and EQ. controls, allowing high quality video to be sent over a distance of up to 1km (up to 100m @56MHz) in conjunction with WV-12N. WV-11NE/EUK - For UK and most European countries WV-11NE/BG - For Belgium and Germany only WV-12N Twisted Pair Receiver Provides a video output (on a BNC connector) from a 3-pole terminal block. It provides LEVEL and EQ. controls and works in conjunction with the WV-11. Range of 100m @ 56MHz line with WV-11. WV-12NE/EUK - For UK and most European countries WV-12NE/BG - For Belgium and Germany only WA-20N Balanced to Unbalanced Stereo Stereo Audio Receiver WA-23N Unbalanced to Balanced Stereo Audio Transmitter A dual RCA connector to a 6-pole terminal block for converting an unbalanced stereo audio signal to balanced audio (or to act as a twisted-pair audio transmitter) with Right and Left audio level controls. 100kHz bandwidth together with WA-20/22. WA-23NE/EUK - For UK and most European countries WA-23NE/BG - For Belgium and Germany only WV-20N A 1:2 Distribution Amplifier and line driver for video A 1:2 distribution amplifier and line driver for video on a BNC to a 3-pole terminal block connector. Video bandwidth exceeds 400MHz and quality video can be obtained (when using high quality coax cables) even 300 meters (1000 ft.) away. The device also provides video LEVEL and EQ. controls. WV-20NE/EUK - For UK and most European countries WV-20NE/BG - For Belgium and Germany only A dual RCA connector output to a 6-pole terminal block for converting balanced stereo audio to unbalanced stereo audio (or to act as a twisted-pair stereo audio receiver). 100kHz bandwidth together with WA-21N. WA-20NE/EUK - For UK and most European countries WA-20NE/BG - For Belgium and Germany only WP-210A XGA/Audio Line Driver WA-21N Unbalanced to Balanced Stereo Audio Transmitter A 3.5 mm mini headphone connector to a 6- pole terminal block for converting an unbalanced stereo audio signal to balanced audio (or act as a twisted-pair audio transmitter) with Right and Left audio level controls. 100kHz bandwidth together with WA-20/22. WA-20NE/EUK - For UK and most European countries WA-20NE/BG - For Belgium and Germany only XGA/Audio Line Driver wall plate with an VGA through UXGA looping input (HD-15) and an amplified and equalized RGBHV output with cable EQ., ID bit control and audio level control. Audio input on 3.5mm connector. WP-210AE/E - For UK and most European countries WP-210AE/B - For Belgium only WP-210AE/G - For Germany only WP-220 XGA/Video/Audio Line Driver WA-22N Balanced to Unbalanced Stereo Stereo Audio Receiver A 3.5mm mini headphone connector output to a 6-pole terminal block for converting balanced stereo audio to unbalanced stereo audio (or to act as a twisted-pair stereo audio receiver). 100kHz bandwidth together with WA-21/23. WA-22NE/EUK - For UK and most European countries WA-22NE/BG - For Belgium and Germany only XGA/Video/Audio Line Driver wall plate with a VGA/UXGA input (HD-15), Composite video input and two stereo audio inputs one on RCAs, one on a mini 3.5mm socket (from PC) and an amplified and equalized RGBHV output with cable EQ., a CV output with cable EQ. and two balanced stereo outputs, one with R&L level controls. WP-220E/E - For UK and most European countries WP-220E/B - For Belgium only WP-220E/G - For Germany only 6.42
Active Devices WP-210E XGA Line Driver WP-110 An XGA line transmitter An XGA line transmitter that receives an XGA signal and transmits it over a CAT5 cable to the TP-120 receiver. The WP110 has a 150MHz video bandwidth, allowing a transmission range of 300ft. (> 100 meters). WP-110E/EUK - For UK and most European countries WP-110E/BG - For Belgium and Germany only XGA Line Driver wall plate with a VGA/UXGA looping input (HD-15) and an amplified and equalized RGBHV output with cable EQ. level, ID bit and termination controls. WP-210 - US Version WP-210E/E - For UK and most European countries WP-210E/B - For Belgium only WP-210E/G - For Germany only component video signals when used with a breakout cable such as the Kramer C-GM/3RVF. WPN-11 UXGA Video Transmitter A unique wall plate combination with which a single multicore VGA/UXGA cable can transmit graphics or video signals (Composite, Y/C, Component, HD etc.) over the built-in coax cable in the graphics cable. Usually used together with the WPN-12 receiver. WPN-11E/E - For UK and most European countries WPN-11E/B - For Belgium only WPN-11E/G - For Germany only WPN-12 Receiver system A unique wall plate combination with which a single multicore VGA/UXGA cable can transmit graphics or video signals (Composite, Y/C, Component, HD etc.) over the built-in coax cable in the graphics cable. Ussually used together with the WPN-11 transmitter. WPN-12E/E - For UK and most European countries WPN-12E/B - For Belgium only WPN-12E/G - For Germany only Size Code Categories Measures (W, H) - 1 Gang US 69mm x 114.3mm EUK 1 Gang UK/Europe 86mm x 86mm BG 1 Gang Belgium/Germany 80mm x 80mm - 2 Gang US 114.3mm x 114.3mm E/E 2 Gangs UK/Europe 146mm x 86mm E/B 2 Gangs Belgium 151mm x 80mm E/G 2 Gangs Germany 151mm x 80mm 6.43