Date: Quantity: Company: Project: Dot XL-3 RGB Dot XL-3 RGB is an extra bright dot with 3 LEDs per dot casing. The dots are constructed on a flexible cable with a customizable pitch. The dots are single dot controllable by DMX or e:pix (DVI capable), and are connected per string using the Dot XL Pixel Distributor. The Pixel Distributors can be daisy chained to form large installations. Product Specifications Model 1 Dot XL-3 RGB Dot XL-3 RGB with diffuser dome Number of Pixel Light Source Color Range Color Resolution 48 pixels 3 High intensity Nichia SMT LEDs per dot 16.7 Million additive RGB colors 3 14-bit (Gamma correction) Viewing Angle 120 170 Luminous Flux 2 16 lm 11 lm Efficacy 2 11.7 lm/w 7.3 lm/w Cover Lens Clear PVC Diffuser dome (PC) LED Pitch Lead Cable Length Housing Adjustment Options Dimensions (Ø L H) Weight Regulatory Listing & Safety Approval Operating Temperature Storage Temperature Environment Humidity 150mm standard; 100mm minimum for customized models 10m standard Thermoplastic Polyurethane Elastomer (optional nylon clip: see Ordering page for details) Flexible cable Ø36 60 12mm Ø1.4 2.4 0.5 25g (Dot); 670g (Pixel Distributor) cetlus 20 C to +50 C / 4 F to +122 F 20 C to +70 C / 40 F to +158 F Ø36 60 27mm Ø1.4 2.4 1.1 Outdoor (DotXL - IP66, IP67 rated; Pixel Distributor - IP66 rated; PSU - IP67 rated) 0 to 90% non-condensing Electrical Specifications Operating Voltage 15V DC Power Consumption 2 1.5W System Specifications Power/Data Interface Control Power Supply Addressing Options TX CONNECT DMX512 / e:pix LED Engine 75W Outdoor Auto-Addressing 1. Diffuser Dome is available upon request. Please consult your regional Traxon office for further details and aid. 2. Measurement per dot LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. This product is NOT suitable for coastal environments. Any such installation will void the product warranty. Product Specification 01/17 V0.6 1 of 8
Photometrics Source Specifications Source 3 LEDs packaged in RGB (One Dot XL-3) Optics 110 Cover Lens Clear PVC Distribution Symmetric direct illumination Candela Distribution Light Output Cd: 0 1.11 2.22 3.34 90 75 60 Color Luminous Flux (lm) Power (Watts) Efficacy (lm/w) White 15.79 1.3 12.63 Red 4.47 0.8 5.88 Green 9.97 0.9 11.33 Blue 1.93 0.7 2.97 4.45 5.56 0 15 30 45 Illuminance at a Distance Center Beam LUX V Beam Width H 1m 6 3.0m 3.0m 2m 1 6.0m 6.0m 3m 1 9.0m 9.0m 4m 0 12.0m 12.0m 5m 0 For fc divide by 10.7 15.0m 15.0m Vert.Spread: 112.5 Horiz.Spread: 112.6 For feet multiply by 3.28 IES and LDT files are available for download from the Traxon website. Product Specification 01/17 V0.6 2 of 8
Dimensions Dot XL 36.2mm/1.43 11.8mm/0.46 15.5mm/0.61 27mm/1.06 Ø20mm/0.79 60mm/2.36 62.5mm/2.46 23mm/0.91 62.5mm/2.46 4.1mm/0.16 4.1mm/0.16 16.5mm/0.65 3.3mm/0.13 WITH OPTIONAL CLIP ASSEMBLY WITH OPTIONAL DIFFUSER DOME IN CLIP ASSEMBLY 36.2mm/1.43 11.8mm/0.46 15.5mm/0.61 27mm/1.06 Pixel Distributor with Power Supply (Outdoor) Cable length: 1000mm/39.4 Ø20mm/0.79 68mm/2.7 60mm/2.36 62.5mm/2.46 23mm/0.91 198mm/7.8 62.5mm/2.46 89mm/3.5 16.5mm/0.65 50mm/2 POWER SUPPLY UNIT (Outdoor) 3.3mm/0.13 PIXEL DISTRIBUTOR WITH OPTIONAL CLIP ASSEMBLY WITH OPTIONAL DIFFUSER DOME IN CLIP ASSEMBLY 20mm/0.79 Ø6.3mm/0.25 x 4 204mm/8 9mm/0.35 Cable length: 300mm/11.8 222mm/8.7 M4 x 4 Product Specification 01/17 V0.6 3 of 8
Mounting Dot XL Dot XL-3 Dot Clip (Not included) Diffuser Dome (Not included) Dot Clip - back Option 1. Screw mounting the dot clip. 15mm DIN rail Dot Clip - front Without diffuser dome Option 2. Dot clip snaps onto DIN rail. Pixel Distributor LED Engine (Outdoor) mounts on top of the Pixel Distributor M4 screws (Included) Anchor bolts M6 (Not included) Product Specification 01/17 V0.6 4 of 8
Mounting Terminating the Dot XL cable and sealing with Field-cut End Cap (End Cap not included) Minimum clearance from last node 35mm/1.38 RTV SILICONE 1 Terminate cable with a straight cut. Ensure there is enough clearance to work with. Clean the surface using alcohol. 2 Apply RTV silicone (not included) on open-ended cable. RTV SILICONE RTV SILICONE Field-cut End Cap 3 Fill end cap cavity with RTV silicone and press open cable end inside. 4 Cover parts with RTV silicone and close cover. 5 Clean excess silicone 6 Place on flat surface and put from end cap. pressure on end cap (eg. with a weighted object) for the cure time recommended by RTV silicone s instructions. Product Specification 01/17 V0.6 5 of 8
System Diagram System Diagram - Butler S2 INDOOR OUTDOOR To construct a longer Data Bridge Cable, use Indoor Data Cable and Outdoor RJ45 Housing. RJ45 Male Connector Housing IP67 Butler S2 TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) Butler S2 DMX/RDM Output Engine Maximum: 100m CONTROLLER 512 DMX Channels per output To other distributor chain Mains AC~ Installation engineer should use appropriate plugs for outdoor connection. LED Engine 75W 15V Outdoor 300mm TX Connect Data Outdoor Cable 0.3m/1ft or 3m/10ft available First dot of string Last dot of string 1000mm Maximum number of Pixel Distributors in the daisy chain depends on available DMX and e:pix channels. Dot XL Pixel Distributor Round lead cable: 300mm Flat cable lead cable: Maximum lead cable length depends on the number of dots and the dot pitch. For standard 48-Dot XL-3 with 150mm pitch, max. lead cable length is 10m. 1PXL dots 3 channels per dot Dot pitch: 100mm minimum End cap Product Specification 01/17 V0.6 6 of 8
System Diagram System Diagram - Video Micro Converter LCE2 fx DVI Source Ethernet Switch Mains AC~ INDOOR OUTDOOR Installation engineer should use appropriate plugs for outdoor connection. LED Engine 75W 15V Outdoor Ethernet Source 300mm To construct a longer Data Bridge Cable, use Indoor Data Cable and Outdoor RJ45 Housing. TX Connect Data Outdoor Cable 0.3m/1ft and 3m/10ft available RJ45 Male Connector Housing IP67 Video Micro Converter (VMC) TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) Maximum: 100m First dot of string DVI IN Maximum 8 outputs. DVI OUT Each output: 1536 channels. Total on 8 outputs: 12288 channels. DVI IN DVI OUT DAISY-CHAINED VMCs MAX. UNITS PER CHAIN: 8 Last dot of string USE DVI SPLITTER FOR FURTHER VMC CHAINS SEE VMC SPECIFICATION FOR MORE INFORMATION 1000mm Maximum number of Pixel Distributors in the daisy chain depends on available DMX and e:pix channels. Dot XL Pixel Distributor Round lead cable: 300mm Flat cable lead cable: Maximum lead cable length depends on the number of dots and the dot pitch. For standard 48-Dot XL-3 with 150mm pitch, max. lead cable length is 10m. 1PXL dots 3 channels per dot Dot pitch: 100mm minimum End cap Product Specification 01/17 V0.6 7 of 8
Ordering Fixtures DO.XA.7102000 48PXL Dot XL-3 RGB, 150mm Pitch, 10m Lead Cable AA755760055 Standard Accessories (Included in Delivery) N/A 1x Pixel Distributor, 4x M4 Screws N/A Optional Accessories DO.AC.0002400 Dot XL-3 Clip (50pcs) AA588400055 DO.AC.0002500 Dot XL-3 Dome (200pcs) AA556190055 DO.AC.0003600 Field-cut End Cap (50pcs) AA556200055 TX Control EN.BU.0000001 Butler S2 AB436200031 AC.BG.0000001 Butler S2 Garage (Optional) AA611800031 160185 Video Micro Converter (DMX/e:pix) AA438940235 160194 Video Micro Converter Garage (Optional) AA623920031 TX Connect DE.AC.0000100 TX CONNECT Data Indoor/Outdoor Bridge Cable, 5m16.4ft AA508850055 DI.IC.0100000 TX CONNECT Data Cable, 1m/3.28ft AA556130055 DI.IC.0300000 TX CONNECT Data Cable 3m/9.84ft A63408C0055 DI.IC.1000000 TX CONNECT Data Cable 10m/32.8ft A6341040055 DE.IC.0060000 TX CONNECT Data Outdoor Cable, 0.6m/1.97ft AA664580055 DE.IC.0300000 TX CONNECT Data Outdoor Cable, 3m/9.84ft AA438810055 DE.AC.0100000 RJ45 Male Connector Housing IP67 AA556100155 TX Power PS.OA.0002200 LED Engine 75W Outdoor AA759120055 DO.AC.0090000 2-pin Field-Installable Connector for Dot XL AA763350055 Product Specification 01/17 V0.6 8 of 8