For Cove Light For acklit Nightbar Decorative SMD 5050 30leds/meter LED Strip Light For Sign Light Home Decorative www.easeking.com Copyright@2010 by eproduction or publication of the content in any manner, without express permission of the publisher, is prohibited.
Introduction Easeking LED Flexible Strips are a power LED backlight lighting fixture. It uses ChiMei & Huga LEDs chips as the light sources. These strips are designed for interior use to bend and twist in just about any direction imaginable. Our surface mount LEDs allow these strips an amazing amount of flexibility without causing damage to the product. Each LED strips comes equipped with an adhesive backing and can be stuck just about anywhere. These strips are amazingly bright and are available in blue, green, red, 3 shades of white, yellow, and a million color version. asic Feature Size: 500mm*10mm*0.2mm Printed circuit board Working Voltage: 12VDC/24VDC View Angle: 120 Cutting Segment: 3led/cuttable Operating Temp: -25~60 Storage Temp: -40~80 Waterproof: Customized Design Life-span: 50,000~80,000hrs Warranty: 3years Packing: 5 meter/ reel/bag; 15 reel/ox 60reel/Carton& 30reel/carton Accessories Information Power Supply Plug with Cord Connector PC oard Color Yellow oard White oard lack oard
Products Size Non Waterproof (IP20) Silicon Waterproof (IP65) PE Tube Waterproof (IP67) PE Tube refill Silicon Waterproof (IP68)
Parameter S-F150-12 12VDC series. Electrical / Optical Characteristics at TA=25 Model No. Qty/5m Work Voltage Power Wave Length Color Lum/m IP ank &Style oard Color ES-F150-12 150pcs DC12V 7.2W/m 620-625nm ed 120 ES-F150-12Y 150pcs DC12V 7.2W/m 590-595nm Yellow 140 ES-F150-12 150pcs DC12V 7.2W/m 465-470nm lue 150 ES-F150-12 150pcs DC12V 7.2W/m 515-520nm reen 210 ES-F150-12W 150pcs DC12V 7.2W/m 6000-8000K White 450 ES-F150-12WW 150pcs DC12V 7.2W/m 4000-6000K Warm White 360 ES-F150-12P 150pcs DC12V 7.2W/m 4000-6000K Pink 260 Solicon Cover/IP65 PE Cover/IP68 PVC Tube/IP68 White, lack &Yellow are available ES-F150-12 150pcs DC12V 7.2W/m Notes: Tolerance of measurement of luminous intensity ±15% Accessories Package No.1 Joining Connector No.2 Wiring Connector 3M Tape ackground
How to Connect LED Strips Please follow the steps as below if a connection is necessary after cut. A. Cut along the cutting mark line same as right picture1, and then tear a little bit 3M self-adhesive tape from the mark. Attention: 1>. If 3M tape is not peeled off a little, It is not easy to insert the strips.. Pull the plastic lock a little and make it out, insert strips, push the plastic lock to the middle. Attention: 1>. Not allowed too much strength while pulling the plastic lock, otherwise, it would destroy the connector. 2>. Make sure the soldering pads fully touch the conjunction metal. Connect Parameter Diagram The Process for Connect LED Strips 1. Cut led strips in Mark 2. Peel out the 3M tape
3. Joint Connector 4. Insert the strips 5. Push the plastic and Soldering 6. Wiring Connector 7. Insert the strips and Soldering Note: Please make sure choose right AC/DC power adaptor to drive P-ibbon. Power more than 12VDC/85W is recommended. Inadequate power may not light up the strip completely; it is harmful for the chips of the led strips. So forbidden to use the inadequate power supply. Please tell us if it is difficulty to buy the right adaptor locally.
Application Architectural decorative lighting Indoor Decoration, Cove lighting Auditorium walkway lighting, Stairway lighting & Decoration order/ contour lighting, Channel letter lighting Emergency & Security lighting, Shop-window decoration.
Certification---CE&oHS