Acoustics H-HLT. The study programme. Upon completion of the study! The arrangement of the study programme. Admission requirements

Similar documents
456 SOLID STATE ANALOGUE TAPE + A80 RECORDER MODELS

CHAPTER 3 AUDIO MIXER DIGITAL AUDIO PRODUCTION [IP3038PA]

clipping; yellow LED lights when limiting action occurs. Input Section Features

Live Sound System Specification

AMEK SYSTEM 9098 DUAL MIC AMPLIFIER (DMA) by RUPERT NEVE the Designer

Recording to Tape (Analogue or Digital)...10

T L Audio. User Manual C1 VALVE COMPRESSOR. Tony Larking Professional Sales Limited, Letchworth, England.

Elegance Series Components / New High-End Audio Video Products from Esoteric

DSA-1. The Prism Sound DSA-1 is a hand-held AES/EBU Signal Analyzer and Generator.

Working Document. Chapter 1. Subject matter and scope This Regulation establishes ecodesign requirements for simple set-top boxes.

OLD WORLD AUDIO U33A VARI-MU STEREO COMPRESSOR INSTALLATION AND OPERATING NOTES

MULTI CHANNEL AV RECEIVERSTR-DH750/STR- DH550

Since the early 80's, a step towards digital audio has been set by the introduction of the Compact Disc player.

Certificate in Recording Arts & Music Tech CPP Page 1 of 9

Stereo Compressor SC4

Natural Radio. News, Comments and Letters About Natural Radio January 2003 Copyright 2003 by Mark S. Karney

Digital Representation

SREV1 Sampling Guide. An Introduction to Impulse-response Sampling with the SREV1 Sampling Reverberator

ex 800 Series ematrix System

CR-6 MIXER USER MANUAL ENGLISH. Order Code: MIXE01

Essentials of the AV Industry Welcome Introduction How to Take This Course Quizzes, Section Tests, and Course Completion A Digital and Analog World

FREE TV AUSTRALIA OPERATIONAL PRACTICE OP- 59 Measurement and Management of Loudness in Soundtracks for Television Broadcasting

ATI Multimedia Center 7.6 Guide to New Features

PROFESSIONAL 2 CHANNEL SOLID-STATE MIC / LINE PREAMPLIFIER USER S MANUAL

Text with EEA relevance. Official Journal L 036, 05/02/2009 P

2018 GUIDE Support for cinemas

AEQ BRAVO Broadcast Mixing Console

Florida Department of Education CURRIUCULUM FRAMEWORK. Digital Television and Media Production

Advance Certificate Course In Audio Mixing & Mastering.

Summit Audio Model TLA-50 Tube Leveling Amplifier

Industriefunkuhren. Technical Manual. OEM Sync-Module FE1000 (IRIG-B) ENGLISH

NATIONAL DIPLOMA: FILM AND TELEVISION PRODUCTION Qualification code: NDFM08 - NQF Level 6

Transmitter Installation and Operation

MX-206 Stereo Microphone Mixer. Operating Manual

Hugo Technology. An introduction into Rob Watts' technology

TL AUDIO M4 TUBE CONSOLE

3:15 Tour of Music Technology facilities. 3:35 Discuss industry trends Areas that are growing/shrinking, New technologies New jobs Anything else?

VariTime TM Digital Sync Generator, PT 5210

Soloist / Advanced Postgraduate Diploma in Music

NZQA unit standard version 3 Page 1 of 7. Demonstrate knowledge of telecommunications cable systems

OTM-3550-SW FREQUENCY AGILE F.C.C. COMPATIBLE TELEVISION MODULATOR INSTRUCTION MANUAL

Motion Picture, Video and Television Program Production, Post-Production and Distribution Activities

Music in the Digital Age

BER MEASUREMENT IN THE NOISY CHANNEL

SMPTE STANDARD Gb/s Signal/Data Serial Interface. Proposed SMPTE Standard for Television SMPTE 424M Date: < > TP Rev 0

DF330 UNIVERSAL NOISE FILTER OPERATORS MANUAL

IQDEC01. Composite Decoder, Synchronizer, Audio Embedder with Noise Reduction - 12 bit. Does this module suit your application?

Automated Local Loop Test System

RF (Wireless) Fundamentals 1- Day Seminar

Industriefunkuhren. Technical Manual. IRIG-B Generator-Module for analogue / digital Signals of Type: IRIG-B / IEEE C / AFNOR NF S87-500

Engineering and Design of Mytek Stereo192-DSD-DAC

PHOENIX AUDIO. Owner s Manual

Lab 1 Introduction to the Software Development Environment and Signal Sampling

ENGINEERING COMMITTEE

Note on Posted Slides. Noise and Music. Noise and Music. Pitch. PHY205H1S Physics of Everyday Life Class 15: Musical Sounds

TCF: Hybrid fibre coax systems Online course specification

AT720USB. Digital Video Interfacing Products. DVB-C (QAM-B, 8VSB) Input Receiver & Recorder & TS Player DVB-ASI & DVB-SPI outputs

Rebis Audio Ltd. RA226 Digital Sampler User Guide

!! 1.0 Technology Brief

LDM24 Digital Monitoring Adapter Manual

Music in Practice SAS 2015

OWNERS MANUAL LUNATEC V3 MICROPHONE PREAMPLIFIER AND A/D CONVERTER

Sound Measurement. V2: 10 Nov 2011 WHITE PAPER. IMAGE PROCESSING TECHNIQUES

Fieldbus Testing with Online Physical Layer Diagnostics

Sencore DA795 Simplified Self-Start Guide

S1 Digital/Analogue Radio Broadcast Mixer September 2009

BENCHMARK MEDIA SYSTEMS, INC. AD / AD2K+ TWO CHANNEL, 96-kHz ANALOG TO DIGITAL CONVERTER

SingMai Electronics SM06. Advanced Composite Video Interface: HD-SDI to acvi converter module. User Manual. Revision 0.

PROMAX NEWSLETTER Nº 25. Ready to unveil it?

Datasheet SHF A

Fusion CD64 CD Player Digital Engine in Depth

Oxygen ORDERCODE D2150

TECHNICAL STANDARDS FOR DELIVERY OF FILE BASED RADIO PROGRAMMES TO

The Dangerous 2-Bus Manual

AEQ BRAVO Broadcast Mixing Console

MATRIX. 24Bit /192kHz ASRC Stereo Audio Processor MATRIX. 2-Channel 24-bit 192-kHz ASRC Desktop Digital Audio Processor CUBE.

Version 1.10 CRANE SONG LTD East 5th Street Superior, WI USA tel: fax:

GS-GC5K ISDN Commentary Mixer South African Broadcasting User Notes

Sound, Music Lighting and Live Production. Short Courses

S1 Digital/Analogue Radio Broadcast Mixer

Physics Homework 3 Fall 2015 Exam Name

FiberLink 3355 Series

MCM-20.4 PRELIMINARY USER GUIDE v1.1

How to overcome/avoid High Frequency Effects on Debug Interfaces Trace Port Design Guidelines

There is a button to select either the AES/EBU or S/PDIF input for the D/A converter, which is located on the rear panel.

TEN.02_TECHNICAL DELIVERY - INTERNATIONAL

Introduction 3/5/13 2

COMMUNICATIONS OUTLOOK 1999

MULTI CHANNEL VOICE LOGGER MODEL: DVR MK I

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

Ref.: Tel.: Fax: January 2014

PROFESSIONAL DJ MIXER OWNER S MANUAL. STANTON MAGNETICS, INC

Datasheet SHF A Multi-Channel Error Analyzer

Questions and Answers to the Call for Tender

QRF5000 MDU ENCODER. Data Sheet

USB-TG124A Tracking Generator User Manual

Sony AV /2 EIAJ Color Deck

DVM-3000 Series 12 Bit DIGITAL VIDEO, AUDIO and 8 CHANNEL BI-DIRECTIONAL DATA FIBER OPTIC MULTIPLEXER for SURVEILLANCE and TRANSPORTATION

Radio for Everyone...

MASELEC MTC-6 SURROUND master transfer and monitor system

Transcription:

Acoustics H-HLT The study programme Admission requirements Students must have completed a minimum of 100 credits (ECTS) from an upper secondary school and at least 6 credits in mathematics, English and Icelandic. Preferably students should have some musical education or experience from playing in an orchestra or a band. Upon completion of the study! Students who have acquired this knowledge are employed as sound engineers for the broadcast media. This includes audio recordings as well as radio and television broadcasts and online newspapers and magazines. They also work in sound studios at recording, post production and dubbing as well as recording live bands and various other events for releasing or broadcasting live. Webcasting is gaining great popularity and with the increasing bandwidth of the Internet, the possibilities for its use are multiplying, creating a greater need for more technicians. Various picture processing services call for technicians for example when transferring images, duplicating, copying and assisting customers. Cinemas, advertising agencies, churches and hotels need people who possess this knowledge. Students who have graduated from the acoustics study programme have a good insight into marketing and have an advantage when launching a project on the market, directing the recording and releasing of music and also when organising and giving concerts. A great number of musicians seek knowledge in recording and post production in order to professionally build up and develop their own bands or music. The options for marketing music are great, both domestically and internationally. The arrangement of the study programme The acoustics study programme is organised according to the final requirements for knowledge and competence, which are set by professional sound engineers working in the business. A great deal of work experience is required as this study programme is based on a considerable amount of training. Students of acoustics have to have a good insight into the theory of electronics because all sound is produced electronically. They also have to have a good grasp of music and music theory. Acoustics is also an important part of the study; covering the behaviour of sound. Furthermore, acoustics must be approached mathematically. Those who want to make a career in the music business also need to know how the market works. Therefore, business management is a part of the study programme. 1

Objectives To provide education in acoustics and audio production that is comparable with the best in the world. To graduate students with a solid knowledge of the principles of audio recording and acoustics and who are well trained in audio recording and audio production. Students should have a solid knowledge of the theory of sound electronics and know the principles of digital technology from analogue/digital converters to compression standards and streaming. They should have a reliable knowledge of music theory and know well the behaviour of sound and its principles. Students should be well acquainted with the principal equipment and tools that are used for audio recordings and production and should be able to record the spoken word and prepare for broadcast as well as record an orchestra. The student acquires knowledge of Most key terms used in acoustics, in Icelandic as well as in English The theory of electronics which is the basis of acoustics The Decibel scale, its fundamentals and various implementations Acoustics, the physics of sound and understand the principles of room acoustics The principal musical instruments and their acoustic behaviour Music theory and is able to read music Audio production in a studio Audio production in the broadcast media Audio production in webcasting Business management of audio production and the key markets Funds and grants The student has the competence to Record sounds; the spoken word, music or high quality sound effects Mix and prepare music for broadcast or album release Compose music using multi-track audio production software Recognise high quality sound from low quality, regardless of fashion trends Organise a recording and be able to estimate the need for equipment for each project Set up sound systems for concerts Work professionally and co-operate with professional people in various fields Make an operational plan for recording, production and/or releasing Take part in the marketing of a company or a product 2

The setup of the acoustics study programme Course unit Total hours 1st semester 2nd semester 3rd semester Credits (ECTS) Acoustics HLF 84 84 4 Theory of sound electronics HRF 210 105 105 10 Music theory and relative pitch HTF 210 105 105 10 Recordings HUT 336 112 112 112 16 Audio production HLV 336 112 112 112 16 Composition HTL 210 105 105 10 Business management HRE 105 105 5 Dubbing HHS 399 199,5 199,5 19 Total hours: 1890 623 633,5 633,5 Total credits (ECTS): 90 NQF 3 NQF 4 The acoustics study programme is for the most part organised on the third and fourth levels as the students have to have considerable experience in audio production or playing a musical instrument. The study programme is comparable to diploma study programmes in other countries and belongs therefore in most cases to level four. Level two to four conform to the National Qualification Framework (NQF) and the acoustics study programme is on levels NQF 2-4. NQF conforms to the European Qualification Framework (EQF) and the acoustics study programme is on levels EQF 3-5. 3

Course name: Acoustics, microphones, the history Acronym: HLF Total number of credits (ECTS): 4 Total number of hours: 84 Number of phases: 1 Number of hours in phase 1: 84 Number of hours in phase 2: Number of hours in phase 3: Students understand the physics of sound and the behaviour of sound and how different types of microphones convert sound into electrical signals. Students understand terms such as phase-shift, projection and reverberation and the difference in the speed of sound in various materials. Students have understood the effects of sound (under and over the audible frequency range). Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, The physics of sound, the structure of various transducers in microphones and how sounds are converted into electrical signals. The different types of microphones and how their characteristics are presented in the product information. The audio function of the ear and the brain. Electronic noise ratio, amplitude ratio, noise endurance, pain threshold. Calculate wavelength from frequency and explain terms such as self-resonance in musical instruments, how sound travels, how the ear detects sound and how the brain converts sound into electronic signals. Select and install microphones for musical instruments for the best possible recording. Choose the best method and the optimum conditions for recording. 4

Course name: Theory of sound electronics Acronym: HRF Total number of credits (ECTS): 10 Total number of hours: 210 Number of phases: 2 Number of hours in phase 1: 105 Number of hours in phase 2: 0 Number of hours in phase 3: 105 The students know Ohm s Law, can calculate voltage, current, resistance and power from given or measured values and know Watt s Law on power and can calculate the power on an audio cable. The students know the Decibel scale from voltage, power or currents. The students know the main terms used in the theory of electronics related to sound and audio production and the difference in VU versus PPM audio metering. The students know the correct way of connecting audio cables to prevent ground loop (RCA, XLR, jack etc.). The students understand the importance of a balanced signal, using two phase audio cables. The students know the major sources of electrical noise and disturbances in the environment. The students know the principles of logic circuits, the binary code. The students know the functions of A/D converters, sampling rate and bitrate. The students understand the importance of sampling rate and bitrate in sampling. The students know PCM coding and principal compression standards. The students are familiar with digital audio cables and distortion problems. The students are familiar with different means of digital storage such as CD and DVD; jitter due to poor quality of cables, connectors or clock and DAT recorders and their structure. Description of the topic of the course on level 2 (knowledge, skill, competence, acquire, analyse, Terms related to voltage, current, resistance, impedance, power and energy. Faraday s span law, the Decibel scale, VU and PPM audio metering. Analogue signal transmission. Measure current, voltage and resistance. Measure sound intensity and calculate it in decibels. Convert between VU and PPM scales. Solder XLR connectors and cables. Repair audio cables, set up an analogue studio. Diagnose malfunction. 5

Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, Digital recording, the binary code, A/D converters, the principles of digital recording and compression. The PCM code. Record sound from a microphone directly into a digital recording equipment without distortion. Compress for different media. Repair audio cables for digital transfer of signals, set up a digital studio. Diagnose malfunction. 6

Course name: Music theory and relative pitch Acronym: HTF Total number of credits (ECTS): 10 Total number of hours: 210 Number of phases: 2 Number of hours in phase 1: 105 Number of hours in phase 2: 105 Number of hours in phase 3: 0 The students can read sheet music in order to follow the playing of an orchestra, soloist or singers and tag the recording. Description of the topic of the course on level 2 (knowledge, skill, competence, acquire, analyse, Sheet music and most musical instruments as well as musical scales. Read sheet music with a soloist or one musical instrument. Follow sheet music of singing or single instrument to insert cues or tags. Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, Sheet music and most musical instruments as well as musical scales. Read sheet music to follow the playing of an orchestra. Follow sheet music of the playing of an orchestra in order to insert cues or tags and change the mixing or the emphasis in the recording. 7

Course name: Recordings Acronym: HUT Total number of credits (ECTS): 16 Total number of hours: 336 Number of phases: 3 Number of hours in phase 1: 112 Number of hours in phase 2: 112 Number of hours in phase 3: 112 The students know all the major types of microphones and can select the appropriate microphone for each situation. The students can use simple recording equipment both inside and outside a studio. The students know how to connect the various devices to peripheral equipment. The students can record sound in difficult situations. The students can do audio production in a multi-track programme. The students can apply most sound effects in audio production. The students can record sound simultaneously into many audio tracks. The students can prepare an audio production and know the mastering process prior to a release. Description of the topic of the course on level 2 (knowledge, skill, competence, acquire, analyse, Microphones, peripheral equipment, recording equipment both digital and analogue. Set up equipment for recording, digital or analogue. Make high quality recording of any sound such as instruments, singing, the spoken word, sound effects etc. Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, Audio recording equipment of various kinds, different microphones and different kinds of peripheral equipment. Assess and communicate which equipment is suitable for each situation. Select equipment for recording, set it up and record. Manage a recording outside as well as inside a studio, with the appropriate equipment and record a classical orchestra, alone or in cooperation with others. 8

Course name: Audio production Acronym: HLV Total number of credits (ECTS): 16 Total number of hours: 336 Number of phases: 3 Number of hours in phase 1: 112 Number of hours in phase 2: 112 Number of hours in phase 3: 112 The students learn to use any kind of audio recording equipment. The student can record, mix, use sound effects and fully process sound in a programme such as ProTools pro. The student is equally capable of audio recording with digital as well as analogue equipment and can process sound with both methods. The student can use computers in an organised way, knows how to copy, tune, edit, restore and beat detect etc. before turning in his projects to others. Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, Digital recording equipment, major terms used in audio recording, processing and adding sound effects. Use equipment in a systematic way in production and playback. Record and process a multitrack recording and forward it to additional or final processing. Work with a producer at audio recording and production inside a studio or at a setting. Turn in an audio production, in raw format or compressed. Description of the topic of the course on level 4 (knowledge, skill, competence, acquire, analyse, Digital and analogue recording equipment and processing equipment for recording and complete processing of sound. Record, edit, mix, apply special effects and turn in a completely processed sound either in an analogue or digital form. Set up recording equipment according to the producer s specifications and record and process Course sound inside description or outside a studio. - Acoustic 9

Course name: Composition Acronym: HTL Total number of credits (ECTS): 10 Total number of hours: 210 Number of phases: 2 Number of hours in phase 1: 105 Number of hours in phase 2: 105 Number of hours in phase 3: 0 The student is introduced to and is able to compose music using digital equipment. The student gets an insight into the world of electronic music and can use equipment such as multi-track audio recording equipment to make sequences to use in music. The student learns to use a sampler, a sequencer, a synthesiser and other specialised software. Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, Digital audio production equipment for making special effects. Equipment for audio production such as audio generator or function generator. The student acquires knowledge of and: Can use equipment systematically to make tones and sounds and is also able to record and playback. Compose music with special effects. Description of the topic of the course on level 4 (knowledge, skill, competence, acquire, analyse, Digital and analogue audio production equipment for making special effects. Equipment for audio production such as audio generator or function generator. The student acquires knowledge of and: Can compose five minutes of music with special effects mixed with instruments. Compose music with special effects mixed with instrumental playing and recording of various sounds. 10

Course name: Business management Acronym: HRE Total number of credits (ECTS): 5 Total number of hours: 105 Number of phases: 1 Number of hours in phase 1: Number of hours in phase 2: Number of hours in phase 3: 105 The students learn about the business environment of the sound industry. The students get an insight into the history of the music industry, how it has developed in the last century and they learn about the major music businesses, in Iceland as well as internationally. The students learn about the key opportunities in the business, its current challenges and where likely opportunities can be found. The students get a solid knowledge in marketing in order to be able to market music domestically as well as internationally. The theory of advertising is introduced as well as the possibilities of the internet. Technical development in the sound industry is analysed as well as the analogue and digital possibilities. Music in the computer game industry is studied. Matters concerning rights are looked into as well as regulations and laws regarding copyright. The role of STEF (the Icelandic Copyright Bureau), contracts and regulations of the music industry with respect to music, music in advertising, film scores etc. Business models for the domestic as well as international music business are studied. Marketing on different levels such as DVD sales, releases, concerts, licences and merchandise connected with the music and film industry. Future possibilities are considered with regard to a changing methodology and environment. The finances and the operation of a company is examined, looking into the theory of finance, accounting, statement of operations, balance sheet, cash flow, budgeting and making a budget for a record and a film. Description of the topic of the course on level 3 (knowledge, skill, competence, acquire, analyse, The music and the film market and knows the tax laws in connection with releasing. Knows the history of the music business and the main jobs in the business. The major contracts in the music business. The Icelandic Copyright Bureau. The legal aspects regarding releasing. Use spread sheets and software for accounting as well as tax settlement. Make a marketing plan for a record, a concert, music or a film. 11

Course name: Dubbing Acronym: HHS Total number of credits (ECTS): 19 Total number of hours: 400 Number of phases: 3 Number of hours in phase 1: Number of hours in phase 2: 200 Number of hours in phase 3: 200 Main emphasis is placed on teaching the principles of dubbing films and TV shows. The students learn to record voices and dub them to film in sync. The students can also mix a soundtrack in mono and stereo. The students learn to use three dimensional sound and are introduced to Surround 5.1. The students learn about the demands for sound in cinemas and the difference in audio production for TV on the one hand and for cinema on the other. Description of the topic of the course on level 4 (knowledge, skill, competence, acquire, analyse, Audio recording and software for dubbing. Use his knowledge to record sound and use sound effects to dub a short film, a cartoon or a film. Work with actors at recording and audio production. Can dub a film with the spoken word, sound effects and music and turn it in using e.g. Dolby Surround 5.1 or the form requested by the cinemas and distribution companies. 12