LED Panel Light Specialists in High Efficiency Lighting DLC 4.0 E485145 E485145
Dimmable Optional Same cost for dimmable or non dimmable lamps, as same design products can help to reduce product categories for our store. DLC 4.0 List DLC4.0 can reach 10lm/w. NO Flicker,top power efficiency PF>0.9 and high CRI (Ra>80), THD<15%. PMMA Guide Plate PMMA highly-efficiency light guide plates with uniform light effect and high illumination. We guarantee no color variation to our LED panel light within 5 years. AIG Insured All of our LED lighting products are insured with AIG Product Liability Insurance. It ensures peace of mind in the rare event of any manufacturing faults or defects by guaranteeing our warranty and compensation. www.seniorled.com
Technique In Optics FLUX PRESERVER DISSIPATING LAMP BODY OPTICS SYSTEM DIFFUSER FLUX PRESERVER High-reflectance aluminium and PVC panel reduces light dispersion and improves upward heat sinking. DISSIPATING LAMP BODY A printed circuit for highly-efficient SMD LEDs, adjusted for longitudinal emission, is placed inside this extruded aluminium profile. OPTICS SYSTEM This highly transparent extruded PMMA panel undergoes a special silk-screening process to improve light emission conveyance and distribution. DIFFUSER This one-side satin-finished cast PMMA shade provides high protection and an optimum light diffusion. www.seniorled.com 3
Specification Item No. Watt (W) Voltage (V) Dimmable LED Lumious Efficiency Lm/W Dim. (mm) Net Weight (Kg) SL-36W-66-8-TG-01 36W 603*603*10 3.7 SL-40W-66-8-TG-07 40W 603*603*10 3.7 SL-45W-66-8-TG-01 36W 603*603*10 3.7 SL-40W-13-8-TG-07 40W AC 100-77V Yes 10lm/W 113*301*10 3.8 SL-45W-13-8-TG-01 45W 113*301*10 3.8 SL-50W-16-8-TG-05 50W 11*603*10 7. SL-60W-16-8-TG-05 60W 11*603*10 7. SL-7W-16-8-TG-13 7W 11*603*10 7. JJ-DM0-10V 0-10V Dimmer 0.0 JJ-DM-B Bottom base 0.10 Surface mounting Fixture Hanging Kits *ft 1*4ft *4ft 4pcs a kit for * / 1*4 6pcs a kit for *4 www.seniorled.com 4
Packing Size (mm) Pcs per Carton Carton Size (mm) Pcs pe 0GP Pcs per 40HQ 595*595 5 635*190*685 100 700 603*603 4 680*75*67 768 178 60*60 5 660*190*710 880 1980 1195*95 5 135*190*400 1000 50 11*301 175*178*370 768 178 1195*595 135*85*675 416 936 11*603 175*18*673 88 648 www.seniorled.com 5
Product Data Details SMALL AND MEDIUM SIZE ENVIRONMENTS EXECUTIVE OFFICE Product: SL-36W-66-8-TG-01-36W Office dimensions: 4,0 x 5,40 m Installation / room height: 3,00 m Average illuminance over desks: ~500 lux Average illuminance on floors: ~300 lux UGR for workstations: <17 Installation centre-to-centre distance: 180x40 cm Product: SL-40W-13-8-TG-07 Office dimensions: 3,15 x 4,40 m Installation height:,0 m Altezza locale: 3,00 m Average illuminance over desks: ~500 lux UGR for workstations: <19 LARGE ENVIRONMENTS Product: SL-50W-16-8-TG-05 Office dimensions: 11,40 x 5,40 m Installation / room height: 4,00 m Average illuminance over desks: ~450 lux Average illuminance on floors: ~300 lux UGR for workstations: <18 Installation centre-to-centre distance: 180x40 cm The project conditions above refer to standard models. www.seniorled.com 6
The Embedded Installation 1 Take down the same size of gypsum board, as per picture 1; Connect the power cord, as per picture Picture 1: Take down the gypsum. Picture : Connect the power core. 3 Put the panel light on the ceiling position, as per picture 3; 4 Keep flat the panel light, as per picture 4 Picture 3: Put the panel light on the ceiling position. Picture 4: Keep flat the panel light. 5 Turn on the light and check if it is ok 6 The lighting effect Picture 5: The lighting. www.seniorled.com 7
Suspension Mount 1 3 4 A B 1. Lossen the 8pcs screws by screw driver as the drawing snowed.. Fix four/six L type brackets onto the panel plate by six M3* 6 head screws. 3. A. Drill five holes (diameter 7~8mm) on the ceiling by hand drill, the center hole is an outlet for power cable. B. Fix accessories holder into the other four holes at each side. C. Assemble SP4*3 head self-tapping screws and holder together and fix them into four holes by screwdriver. D. Pass the steel cable through holder, rotate and connect with the other holder then tighten it. 4. Fix the steel cable to the lock devic in L type bracket, adjust the length to be 15MM by pressing the lock device. 5. After its installation, position wires tightly in lock device with hex wrench, to avoid the lights unbalance. 6. Adjust the positons of driling holes in ceilings according to specification. www.seniorled.com 8
Surface Mount 1 * (A1/A) (A1) * (B1/B) (B1) (A) 3 4 (B1) (A1) DRIVER DRIVER (B) (A) LED panel light (A) 1. Parts A1, A, B1, B;. First install A1, A, and B1 (as illustrated); 3. As is shown in the figure, fix A1 and A on the ceiling or on the roof, and then insert the panel light directly (the end with poer source enters later); 4. Install B, finish installation. www.seniorled.com 9