HDR2250T Twin Tuner PVR
WARRANTY PROCEDURE v1.7b: July 2016 for 12M Repair Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures. 1. Please read this warranty card. 2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. 3. If you require Warranty Service, please contact the TEAC Warranty Service Hotline at 1300 553 315 for assistance. Please ensure that you have the model number, serial number and purchase receipt ready when you call. Please complete the section below and keep this information for your own records. Owner s Name Owner s Address Postcode Model Name/No. Serial No. Dealer s Name Dealer s Address Postcode Thank you for selecting a TEAC product If your TEAC product malfunctions, please call us directly for warranty support between Monday to Friday at 8.30AM 5PM AEST at the TEAC Warranty Service Hotline 1300 553 315 For other enquiries, please contact us at: www.teac.com.au When calling to receive warranty service, please have: 1. Your model and serial number 2. Proof of purchase 3. And your product in front of you NOTE: - You are required to provide a copy of your proof of purchase in order to have your claim processed. - Please read the Terms and Conditions for details of your warranty entitlement.
TERMS AND CONDITIONS v1.7b: July 2016 for 12M Repair Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill. Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC warranty only applies to TEAC products purchased NEW from a TEAC Authorised Retailer in Australia. This warranty only applies to the original purchaser and cannot be transferred. 2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates, being the Australian Consumer Law. 3. Refund or replacement via your TEAC Authorised Retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind. 4. Subject to the terms herein, this warranty effectively covers TEAC products under the 12 Month Repair Warranty Scheme, 12 months from the date of original purchase. 5. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if: a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or entry of liquids, objects or creatures into the product, cockroach infestations, or d) The customer is unable to provide proof of purchase of the product for verification, or e) The serial number of the product is missing or has been tampered with. 6. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the sale of any equipment other than as stated in this warranty and outlined above. 7. TEAC and/or its Authorised Service Centres reserve the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers/retailers.
Content 1.Reference...2 1.1General Features...2 1.2 Accessories...2 1.3 Basic Function...3 1.3.1 Front and Real Panel...3 2.Remote Control Unit (RCU)...4 3.Installation...5 3.1 Terrestrial Auto Search...5 3.2 Terrestrial Manual Search...5 3.3 Backup & Recovery...6 4.Channel Edit...6 4.1 Channel Edit...7 4.2 Delete All Channels...8 4.3 Vertical Epg...8 4.4 Horizontal Epg...8 5. Setting...9 5.1 Audio&Video Output Setting...9 5.2 Osd Setting...9 5.3 Time...10 5.4 Parental Control...10 5.5 System Information...11 5.6 Firmware Update...11 5.7 Factory Default...11 6.PVR...11 6.1 Record File Browser...11 6.2 Media Browser...12 6.3 Picture Browser...12 6.4 Timer List...12 6.5 Storage...13 6.6 PVR Setting...13 7. Additional Information...13 7.1 Problem Solving...13 7.2 Technical Specification Tuner & Demodulator...14 1
1.Reference 1.1General Features Fully DVB T2/T compliant Max 5000 Channels memory space Multi-language OSD support with subtitles function Easy and fast software upgrade via USB Support Auto/NTSC/PAL and 4:3 16:9 widescreen Parental lock function 8 Favourite channel groups Channel search in automatic, manual and network search 7 days searchable EPG with program info Powerful PVR and time-shift function Various channel editing functions (favourite, move, lock rename) NTFS file system playback FAT32 recording Scheduled recording via EPG 500GB Internal hard disk Record 2 channels while watching a 3rd Series record 1.2 Accessories User manual A/V Cable DC12V Power Adaptor HDMI cable Remote Control 2
Model No.:HDR2250T 100-240V~ 50/60Hz 25W MAX Standby: <1W 1.3 Basic Function 1.3.1 Front and Real Panel Y PB PR LOOP OUT ANT IN SPDIF HD-OUT CVBS L R 12V 3
2. Remote Control Unit (RCU) Key Function Turn on unit/switch to standby mode Media Enter Media Browser menu 0~9 Enter digits or channel number Output mode Aspect ratio Sleep time Subtitles CH. FAV Enter Favourite Channel mode Recall / (VOL) Increase/decrease volume (CH) Switch channels Mute sound. Press again to unmute AUDIO Audio menu PVR LIST View PVR list RECALL To Back to last played channel. MENU To enter or exit the main menu. SCHEDULE Browse schedule EPG View electronic program guide INFO Show current channel info ARROWS Navigate menu up, down, left and right OPTION Show options during playback EXIT To return to the previous menu screen or escape from the menu. Function RED/GREEN/ YELLOW/ BLUE: Extended function key OK/LIST To enter the highlight menu or perform an operation you select. / Rewind / Fast Forward Play / Pause Stop Playing Series Record REPEAT Repeat mode Start recording current channel / Play previous/next media file 4
3. Installation There are three sub items: DTV Auto Search DTV Manual Search Backup & Recovery: To import or export database Use the Installation menu to search for and add new channels. 3.1 DTV Auto Search Enter DTV Auto Search to search for channels automatically. 5
3.2 DTV Manual Search DTV Manual Search Press OK button to selected the frequency, then press red button to search the channels 3.3 Backup & Recovery Select to import or export Database from USB 4. Channel Edit The channel edit menu has four items: Channel Edit, Delete All Channels, Vertical EPG, Horizontal EPG. To enter Channel Edit page, press [UP/DOWN] keys to highlight the channel item and then press [OK] to enter. 6
4.1 Channel Edit A password is required to enter the Channel Edit menu (the default password is 0000 ) Press [OK] to play the highlighted channel. Press Blue button to lock/unlock channels selected. Press Yellow button to delete channels selected. Press Green button to select/unselect the highlighted channel. Press Red button to sort channel list of current group, you can sort by Name/TP/Fav/FTA_CA/HD_SD/default/LCN. Press [0] to move selected channels Press [1] to add highlighted channel to a favourite list, on fav list menu you can also press [2] to rename fav list name. Press [2] to editthe name of highlighted channel. 7
4.2 Delete All Channels A password is required to enter the Delete All Channels menu (default password is 0000 ) Afterwards, all channels can be deleted. Warning: Please note that once you perform Delete All, all channels will be deleted. This operation cannot be reversed. 4.3 Vertical EPG Press [EPG] button to switch between vertical EPG and horizontal EPG, Press Red button to set record timer for the highlighted EPG content. Press Green button to set reminder timer for highlighted EPG content. Press Yellow button to view previous day EPG content. Press Blue button to view next day EPG content. 4.4 Horizontal EPG Press [EPG] button to switch between vertical EPG and horizontal EPG, Press Red button to set record timer for the highlighted EPG content. Press Green button to set reminder timer for highlighted EPG content. Press Yellow button to view previous day EPG content. Press Blue button to view next day EPG content. 8
5. Settings 5.1 Audio & Video Output Setting Video Resolution: Press [OK] button and then press [UP/DOWN] button to set video resolution (1080p,1080i,720p,PAL,NTSC). TV Aspect Ratio: Press left/right button to set set aspect ratio of TV picture(auto,4:3 or 16:9.). Aspect Ratio Conversions: Press left/right button to set set aspect ratio mode(full,letter Box,Pan Scan). Digita Audio Format: Press left/right button to set audio mode(pcm,bit Stream). 5.2 OSD Setting OSD Transparency: Set the screen transparency. OSD Timeout: Set the time duration of the OSD display menu Language Setting: Set OSD language. Auto Standby Mode: If ON, the system will go into auto standby after an idle time period. 9
5.3 Time Enter Time Menu to edit time settings. Mode:In Auto, time info is obtained from TS. Display current date:manually set current date. Display current time:manually set current time. Daylight Savings Time:Enable/disable Daylight Savings Time. Region:Set time zone. 5.4 Parental Control A password is required to edit Age Control settings. Default password is 0000. You can edit Lock Setting for the Installation menu, Setting menu and PVR menu. New password is required once Installation menu is set to Lock. 10
5.5 System Information You can view System Information including build time, and hardware and software version. 5.6 Firmware Update A password is required to update the irmware. Default password is 0000. You can carry out system software upgrade via USB storage Press OK button to start upgrade system will reboot automatically once upgrade is finished. Warning: Do not switch off power during upgrade, software and hardware may occur as a result. You can find and download the latest firmware updates at www.teac.com.au 5.7 Factory Default The default password is 0000. All satellite, TP, Program database and system settings will restore to factory default. Warning: Please note that once you perform factory default, all data and settings will be erased. 6. PVR 6.1 Record File Browser You can view the file which you have recorded. 11
6.2 Media Browser You can view media files in this menu. Press Left/Right button to select All/Recording/Media/Photo, files can also be removed and sorted. Press Red button to select/unselect all files, reverse select files. Press [OK] button to preview the selected file. Press Green button to select files Press Yellow button to Remove file Press Mode button to select the file mode 6.3 Picture Browser You can view and edit all pictures in the Picture Browser. Press [OK] button twice to enter sideshow mode in full screen. 6.4 Timer List Through the Timer List you can manage scheduled programs. In timer menu, you can view and edit the scheduledprogram s name, start time,duration, mode etc. Press [OK] button to edit highlighted timer. Press Red button to add a new timer. Press Green button to remove the highlighted timer. Press Yellow button to clear all timers. Press Blue button to sort timer (sort by run time, sort by create time). 12
6.5 Storage You can view the data on all connected USB storage devices. 6.6 PVR Setting Auto Time Shift: Enable/disable time-shift function. Time Shift Duration: Set the timeshift duration time. Recording Storage: Select USB storage device to record to. Playback Start Position: You can set the playback start position for media and PVR. Auto Play Next Program: You can enable or disable Auto Play Next Program when current playing media ends. 7. Additional Information 7.1 Troubleshooting Issue Possible causes What to do LED on the front panel fail to light up/is not lit. No picture or sound. Main supply cable is not connected. No or weak cable signal. Check if the mains supply cable is plugged in the power socket. Check the signal cable connections or change the cable. No startup menu on screen after turning on STB for the first time. The system is connected by AV/ HDMI cables and the TV is not in AV/EXT mode. Switch the TV to the appropriate AV/HDMI input. The remote control is not working. You have forgotten your password. Battery exhausted. Remote control is not aimed correctly STB is in standby mode. Change the batteries. Aim the remote control at the STB. Check that nothing blocks the front panel. Chek if LED indicator on the front panel is showing the time, press the power button to switch off standby mode. Contact the dealer or Service Provider. They will help you set it up again. 13
7.2 Technical Speci ication Tuner & Demodulator Demodulator Type Constellation Bandwidth DVB-T2 BPSK, QPSK, 16QAM, 64QAM 16/32//128/256 QAM 6Mhz/7Mhz/8Mhz Standard ISO/IEC 13818-1 Input Max. Bit Stream Rate Input connector 1 Input Frequency Input connector 2 Input Frequency MPEG Transport Stream 45MBps IEC Male 51MHz ~ 858MHz IEC Male 51MHz ~ 858MH Profile Level H.264, H.263 Aspect Ratio 4:3,16:9 Video Resolution Audio Decoding Sound Mode MPEG-2 MP@HL P3,MPEG1/2/4,AVC,HEVC,AVS,AVS+,VP8,VC-1 BP/MP/HP up to L4.1, SP/ASP up to L5 720p/1080i/1080p MPEG1/2/, AAC/ HEAAC V1/V2,AC3/EAC3,OGG,FLAC,APE Stereo, mono, dual AV and Data In/Out Connector RCA HDMI Power Input Voltage Power consumption Physical Specification Weight (Net) AUDIO L, R. VIDEO out. HDMI 1.3 transmitter with HDCP 12V-DC 10W(max) Around 1.09kg Operating Temp 0 +40 Storage Temp -40 to +65 14