2446.2 en.qxd 03-08-2006 15:32 Pagina 1 Help? If this instruction manual does not give an answer or if Tips do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. Model: 37PF7320/79 37PF7320/98 42PF7320/79 42PF7320/98 42PF7420/79 42PF7420/98 50PF7320/79 50PF7320/98 42PF7520Z/79 Product No: Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Preparation.....................................2 To use the menus................................3 Remote control..............................4-5 The keys on the right side of the TV set..............6 Rear connections................................6 Recorder (VCR-DVD+RW)......................7 Devices with Component Video Output connectors...8 Devices with Progressive Scan output............. 9 Devices with HDMI connector..................10 Devices with DVI connector to the HDMI connector of the TV...................................10 Computer with VGA connector to the PC-VGA connector of the TV..........................11 Side connections................................12 Record with your recorder........................13 How to search for and store TV channels.............14 Give name..................................16 Editing of channels............................16 Features menu..................................17 PIP (Picture in Picture)........................17 Child lock.................................. 18 Teletext.......................................19 Using in PC monitor mode........................20 Using in HD (High Definition) mode.................21 Tips..........................................22 English Recycling The materials used in your set are either reusable or can be recycled. To minimise environmental waste, specialist companies collect used appliances and dismantle them after retrieving any materials that can be used again (ask your dealer for further details). 3104 315 2446.2 1
2446.2 en.qxd 03-08-2006 15:32 Pagina 2 Care of the screen Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage. Do not use liquid cleaners or aerosol cleaners. Wipe off saliva or water drops as soon as possible.their long time contact with the screen causes deformations and colour fading. Warning concerning stationary images on the TV screen A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen.this is called phosphor burn in. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen. Black Bars When black bars appear at the left and right side of the screen, it is recommended to change to a picture format so that the picture fills the entire screen. Preparation & Wall mounting instructions/table stand According to the type of TV you ve purchased a wall mount bracket and/or stand may be supplied. How to mount the supplied stand and/or wall mount bracket, see the supplied Quick Start Guide. Make sure that the wall mount is being fixed securely enough so that it meets safety standards. The weight of the TV (excl. packaging) is about 23,2 kg (37PF7320); 37,3 kg (42PF7320/7520Z); 27kg (42PF7420); 50 kg (50PF7320). Note: Other (not supplied) stands are optional accessories. Consult your dealer. é For ventilation, leave at least 5 cm free all around the TV. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity.avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. For best picture quality use the suppressor-aerial cable supplied. To connect peripheral equipment, see p. 6. ( Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of 110-220V / 220-240V (see p.22). To prevent damaging the power (AC) cord which could cause a fire or electric shock, do not place the TV on the cord. Remote control: Pull out the plastic insulation sheet from the battery, this will activate the remote control. The battery supplied with the appliance does not CR 2025 contain mercury or nickel cadmium so as to protect the environment. Please do not discard your used batteries, but use the recycling methods available (consult your distributor). è Switch the TV on :Press the power switch B at the right side of the TV. An indicator on the front of the TV lights up. Press the -P+ keys or the B key on the remote control. 2
2446.2 en.qxd 03-08-2006 15:32 Pagina 3 To use the menus & Press the MENU key on the remote control to summon the main menu. é Use the cursor up/down to select Picture, Sound, Features or Install. Use the cursor in the right direction to select the menu item. Use the cursor up/down again to select a setting. ( Use the cursor left/right to adjust. To exit the menus, press the MENU key repeatedly. Note: Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected. TV menu TV Menu Picture π Sound Features Install Picture Brightness π Colour Colour Contrast Contrast Sharpness Colour Temp Hue Colour Temp. p π Picture menu: Brightness: this changes picture brilliance. Colour: this changes the intensity of the colour. Contrast: this changes the difference between the light and dark tones. Sharpness: this changes the picture definition. Hue: this adjusts the picture to obtain natural skintones. Colour Temp.: this changes the colour rendering: Cool (bluer); Normal (balanced) or Warm (redder). TV Menu Picture Sound π Features Install Sound Equalizer Brightness π Colour Balance Contrast (AVL) Dolby Sharpness Virtual Colour Temp 120 Hz 500 Hz 1500 Hz 5 khz 10 khz * Manufactured under license from Dolby Laboratories. Dolby Pro Logic and the double-d symbol are trademarks of Dolby Laboratories. Sound menu: Equalizer: to adjust the sound tone (from bass 120 Hz to treble 10 khz). Balance: this balances the sound on the left and right speakers. (AVL (Automatic Volume Leveller): this is used to limit increases in sound, especially on programme change or advertising slots.) Dolby Virtual: simulates the surround sound experience from two speakers using Dolby Pro Logic* providing the listener with the sensation of being surrounded by additional speakers. TV Menu Picture Sound Features π Install Features Timer π Brightness Child Lock Colour Contrast+ Contrast NR Sharpness PIP Colour Temp (Sleep) Time Start Time Stop Time Channel Features menu: Timer, Child lock and PIP: see p. 17-18. Contrast+: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black. NR: attenuates picture noise (snow) in difficult reception conditions. Install menu: see p. 14 3
2446.2 en.qxd 03-08-2006 15:32 Pagina 4 Use of the remote control x Pixel Plus demo on/off (Only available on certain versions.) Press the x key. The screen is divided into 2 parts: - in the left part Pixel Plus is switched off; - In the right part Pixel Plus is switched on. Press the x key again to switch the Pixel Plus demo off. Ò π Video recorder or DVD keys Q Surround mode Virtual Dolby* Surround Optimal with Dolby surround signals. Enables you to experience the effect of Dolby surround Pro Logic, reproducing a rear sound effect. See Sound menu, Dolby Virtual, p. 3. Note:You can make the same selection in the Sound menu, p. 3. AV To display the Source list to select TV or peripheral equipment connected to CVI-1, AV, PC- VGA/CVI-2, HDMI/PC-D or Side. See also p. 6. h Active control Optimizes the picture quality according to the quality of the reception. Press this key to switch between On, On with sensor and Off. MENU Main menu on/off Cursor keys Press the keys oœpπ to navigate through the menus. VOL To adjust the volume. 0/9 Digit keys To select a TV channel. For a two digit programme number, enter the second digit before the dash disappears. B Standby Press to switch the TV on or off from or to standby mode. When switched off, a red indicator on the TV lights up. æpip (Picture in Picture) on/off (p. 17) ı List of programmes To display/clear the list of programmes. Use the keys oœ to select a programme and the key π to display it. X Sound mode To switch from Stereo or Nicam Stereo to Mono or to choose between Dual I or Dual II in case of bilingual transmission. When the sound mode is Mono, the indication is displayed in red. f:gb Teletext Teletext keys. See p. 19. Interrupt the sound or restore it. Smart picture a and sound M To select predefined picture and sound settings. This Philips TV has been set at the factory to look best in bright store environments which use fluorescent lighting. As your home will likely not be as well lit as a store, we recommend you that you cycle through the various smart picture modes to find the one that best stuits your own viewing conditions. Most consumers will find that Natural is the correct choice. P Programme selection To move up or down a programme. The number, (the name) and the sound modes are displayed for a few seconds. For some TV programmes the title of the programme appears at the bottom of the screen. 0 Previous TV channel Press to display the previously selected TV channel. 4
2446.2 en.qxd 03-08-2006 15:32 Pagina 5 MODE* Press this key to switch between TV, DVD and AUX functions. q 16:9 formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 picture sometimes have a black band at the top and the bottom of the screen (letterbox format). This function allows you to optimise the picture display on screen. Using the different formats Press the q key or use the keys pπ to select the different modes: 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle Zoom, Superzoom and Widescreen. 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Movie Expand 14:9 The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture. Movie Expand 16:9 The picture is enlarged to 16:9 format.this mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format). Subtitle Zoom This mode is used to display 4:3 pictures using the full surface of the screen leaving the subtitles visible. Superzoom This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture. Widescreen This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. Note: If you display a 4:3 picture in this mode, it will be enlarged horizontally. i Screen information To display/remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen. * Mode selector The remote control lets you control the main functions of the VCR or DVD. Press the MODE key to select the required mode: DVD or AUX (VCR). The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle.the remote control automatically returns to TV mode. The following keys are operational, depending on the equipment: B, X, Ò π, OK, MENU, cursor keys, -P+, digit keys, i, 0. 5
2446.2 en.qxd 03-08-2006 15:32 Pagina 6 Keys on the right side of the TV - VOLUME + MENU/OK - PROGRAM + POWER Should your remote be lost or broken you can still change some of the basic settings with the keys on the right side of your TV. Press: POWER : to switch the TV on or off. + VOLUME - : to adjust sound level. + PROGRAM - : to select programmes. MENU : to access or close menus. The + PROGRAM - keys can be used to select an adjustment and the + VOLUME - keys to make that adjustment. Rear connections There is a wide range of audio and video devices that can be connected to your TV.The following connection diagrams show you how to connect them to the TV. CVI-1 can handle YPbPr and Audio L/R; AV CVBS,Y/C and Audio L/R; PC-VGA/CVI-2 VGA or YPbBr and Audio L/R; HDMI/PC-D HDMI or DVI. MONITOR OUT CVI-1 /PC-D PC-VGA/CVI-2 6
2446.2 en.qxd 03-08-2006 15:32 Pagina 7 Recorder (VCR-DVD+RW) CABLE 3 4 IN OUT RECORDER Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5m from the screen. & Connect the RF Antenna cable 1 to the RF IN socket of your recorder. é Connect another RF cable 2 from the output OUT of your recorder to the TV s input x ANTENNA 75 Ω jack. Better playback quality can be obtained if you also connect the Video,Audio Left and Right (only for stereo equipment) AV cables 3 to the VIDEO, AUDIO L and R input jacks of AV. Press the AV key on the remote control repeatedly until AV is selected. If your recorder has an S-VHS video jack: For improved picture quality, connect an S-video cable 4 with the S-VIDEO input. S-Video does not provide audio, so audio cables must still be connected to provide sound. MONITOR OUT 6 VIDEO L/Mono R The MONITOR OUT connector can be used for daisy chaining or to record programs from your TV 6. Only when a recorder is connected to MONITOR OUT it is possible to record an analog program from your TV. See Record with your recorder, p. 13. IN OUT RECORDER 7
2446.2 en.qxd 03-08-2006 15:32 Pagina 8 Devices with Component Video Output Connectors (YPbPr) CVI-1 can handle 480i, 480p, 576i, 576p, 720p and 1080i signals. CVI-1 CVI-1 CABLE 4 3 2 OUT 1 IN & Connect the RF Antenna cable 1 to the RF IN socket of your recorder. é Connect another RF cable 2 from the output OUT of your recorder to the TV s input ANTENNA x 75 Ω jack. Connect the three separate component video cables 3 to the device having component video outputs (YPbPr), such as DVD-players, laser-disc players, videogame players, satellite receivers, or other equipment and to the Y, Pb and Pr jacks of CVI-1 on the TV. Connect the audio cable 4 to the device s AUDIO L and R jacks and to the L and R audio jacks of CVI-1. Note: the labels for the component video sockets may differ depending on the DVD player or the device connected. Although the abbreviations may vary the letters B and R stand for blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player s or device s instructions for use for definitions and connection details. ( Press the AV key on the remote control repeatedly until CVI-1 is selected. 8
2446.2 en.qxd 03-08-2006 15:32 Pagina 9 Devices with Progressive scan output (e.g. a digital Set Top box, a video game console or Progressive scan DVD player (480p, 576p, 720p or 1080i) PC-VGA/CVI-2 PC-VGA/CVI-2 1 2 DVD & Connect the device with 2Fh YPbPr output to the VGA connector 1 (with the supplied adapter cable VGA to cinch) and to the L and R AUDIO jacks 2 of PC-VGA/CVI-2. See also the manual of your High Definition device. é Press the AV key on the remote control repeatedly until PC-VGA/CVI-2 is selected. Note:This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries Association standard EIA770.3. Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display. Warning: In case you notice scrolling images, wrong colors or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the correct way or move your digital device further away from your TV. 9
2446.2 en.qxd 03-08-2006 15:32 Pagina 10 Devices with HDMI (High Definition Multimedia Interface) connector HDMI is the leading new standard for Digital High Definition video and audio interconnection. Eg. with a HDMI/PC-D Digital Set top box, with HDMI-equipped devices like a PC-VGA/CVI-2 DVD-R,AV receiver... /PC-D The HDMI connector allows the following TV and monitor display modes via the AV key on the remote control, for High Definition (HD) and computer (PC) equipment: ENHANCED DEFINITION TV (EDTV) 720 x 576p HIGH DEFINITION (HDTV) 1280 x720p 1920 x1080i 1 VGA (PC) 640 x 480 60 Hz SVGA 800 x 600 60 Hz XGA 1024 x 768 60 Hz 1280 x1024 60 Hz & Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the HDMI/PC-D connector of your TV 1. Notes: - Proper working is only guaranteed with HDMI compliant consumer products. - Digital devices from different manufacturers have the possibility of differing output standards which may cause for the television to properly display; - If the set is cold, there may be a small flicker when the set is turned on.this is normal, there is nothing wrong with the set. é Press the AV key on the remote control repeatedly until HDMI/PC-D is selected. Press the X key on the remote control repeatedly to select HDMI Audio. Computer or device with DVI connector to the HDMI connector of the TV HDMI/PC-D /PC-D HDMI 1 PC-VGA/CVI-2 2 & In case a HD-DVI device (connected with a DVI to HDMI cable) 1 is connected, also connect the audio cable 2 (if audio is present) to the AUDIO outputs of your HD device and the R (right) and L (left) CVI-2 inputs of the panel of the TV. é Press the AV key on the remote control repeatedly until HDMI/PC-D is selected. Press the X key on the remote control repeatedly to select PC-HD Audio. DVI 10
2446.2 en.qxd 03-08-2006 15:32 Pagina 11 Computer with VGA connector to the PC-VGA connector of the TV PC-VGA/CVI-2 PC-VGA/CVI-2 1 2 & Connect one end of a VGA cable 1 to the video card of the computer and the other end to the VGA connector at the bottom of the TV. Fix the connectors firmly with the screws on the plug. é In case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your Multimedia computer and to the AUDIO R (right) and L (left) inputs. Press the AV key on the remote control repeatedly until PC-VGA/CVI-2 is selected. The VGA connector allows the following TV and monitor display modes: VGA 640 x 480 60 Hz SVGA 800 x 600 60 Hz 1024 x 768 60 Hz XGA 1024 x 768 60 Hz 1280 x 1024 60 Hz Note: If possible, use the XGA1024x768@60Hz video mode to obtain the best image quality. 11
2446.2 en.qxd 03-08-2006 15:32 Pagina 12 Side connections (camcorder, video games, headphone,...) 1 3 IN 2 IN 2 1 IN 3 IN Camera, Game or Camcorder & Connect your camera, game or camcorder as shown. é Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3. S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S- VIDEO input 1 and AUDIO inputs 3. Do not connect cable 1 and 2 at the same time;this may cause picture distorton. Press the AV key on the remote control. Press the cursor up/down to select REAR/SVHS. ( Press the cursor right. Headphone Insert the plug into the headphone socket L as shown. The headphone impedance must be between 8 and 4000 Ohm.The headphone socket has a 3.5 mm jack. 12
2446.2 en.qxd 03-08-2006 15:32 Pagina 13 Record with your recorder Record a TV program You can record a TV program using your recorders tuner without affecting your TV. & Select the channel number on your recorder. é Set your recorder to record. See the handbook for your recorder. Switching channel numbers on your TV does not disturb recording! Record a programme from MONITOR OUT You can record a program on your recorder from the TV tuner, and from a device connected to AV or the side connectors. Note: you cannot record from a CVI or HDMI connected device. & Select the programme you want to record and the correct input on your recorder. é Set your recorder to record. Do not switch to another TV channel, AV programme or programme from a device connected to the side while recording. Switching to a programme from a device connected to CVI or HDMI does not disturb recording. 13
2446.2 en.qxd 03-08-2006 15:32 Pagina 14 How to search for and store TV channels TV Menu Picture Sound Features Install π Language Auto Store Manual Store Sort Name Channel Edit To install your TV proceed as follows: & Press the MENU key on the remote control. é Use the cursor up/down to select Install. Press the cursor right to enter the Install menu. Use the cursor left/right to select your language. Auto store Auto Store Channel π... TV π freq p o œ π & Select Auto Store in the Install menu. The autostore option label Start? appears. é Press the cursor right. The progress of autoprogramming is displayed. You can use the Sort menu to renumber the stored TV channels. Note: Channel numbers will always be written in Latin characters, even when a language has been selected which uses other characters. Sorting TV channels Install Language... Auto Store 10 p Manual Store 11 Sort π 12 π Name 13 Channel Edit & Select Sort in the Install menu and press the cursor right é Select the TV channel you want to move using the cursor up/down and press cursor right. Select the new number and validate with the cursor left. Repeat steps é and for each TV channel you wish to renumber. ( To exit the menus, press the MENU key repeatedly. 14
2446.2 en.qxd 03-08-2006 15:32 Pagina 15 Manual store Install Language Colour System Auto Store Sound System Manual Store π Search Sort Channel Name Fine tune Channel edit Searching for and storing TV channels is done channel by channel.you must go through every step of the Manual Installation menu. & Select Manual Store in the Install menu and press the cursor right to enter. é Select Colour system and press the cursor right. If Auto is selected, the respective colour system will be automatically selected according to the transmission system. If the reception is poor, select another colour system with the cursor left/right. Press the cursor down. Select Sound system and press the cursor right. If Auto is selected, the respective sound system will be automatically selected according to the transmission system. Note: if the reception is poor, select another sound system with the cursor left/right. ( Press the cursor down. Search for a TV channel: Press the cursor down to select Search and press the cursor right to start searching. Direct selection of a TV channel: If you know the frequency, enter it directly with the digit keys 0 to 9. Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook. è Press the cursor down and enter the programme number with the digit keys.! Fine tune: In case of poor reception, you can improve the reception by adjusting the frequency with the cursor left/right. ç To store your TV channel, select Store and press the cursor right. Repeat steps é to! to store another TV channel. 0 To exit from the menu press the MENU key on the remote control repeatedly. 15
2446.2 en.qxd 03-08-2006 15:32 Pagina 16 Give name Install Language 10 Auto Store 11 Manual Store... Sort Name π Channel Edit It is possible to change the name stored in the memory or to assign a name to a TV channel or external for which a name has not yet been entered.a name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. Note : It is not possible to rename the VGA source. & Select Name in the Install menu and press the cursor right. é Select the programme number. Press the cursor right. Select the following character with the cursor up/down. ( Select the following position with the cursor right. Select the following character. è Press the cursor left repeatedly when finished.! Select another programme number and repeat steps é to è. ç Press the MENU key to return to the TV menu. Press again to exit the TV menu. Note: space, numbers and other characters are located between Z and A. Editing of channels Install Language Channel Auto Store Skipped Manual Store Sort Name Channel Edit π This feature allows you to edit or skip channels from the channel list which have bad of weak signals or channels which you do not watch often. Note: Once a channel is skipped, you cannot select it with the -P+ key; you can only access the channel with the digit keys. & Select Channel edit in the Install menu; é Press the cursor right to enter the channel list. Select the channel you want to skip with the cursor left/right. Press the cursor down to select Skipped On or Off. ( Press the cursor up/down to select another channel and repeat step. Press the MENU key to return to the Install menu. 16
2446.2 en.qxd 03-08-2006 15:32 Pagina 17 Features menu Timer TV Menu Picture Sound Features π Install Features Timer π Child Lock Contrast+ NR PIP Brightness Colour Contrast Sharpness Colour Temp (Sleep) Time Start Time Stop Time Channel Activate Display This menu lets you use the TV set as an alarm. & Press the MENU key. é With the cursor, select Features, then Timer. Sleep (only available on certain versions): to select an automatic standby period. Time: enter the current time. ( Start Time: enter the start time. Stop Time: enter the standby time. è Channel: enter the number of the channel for the wake-up alarm.! Activate: the settings include: Once for a single alarm; Daily for each day, Off to cancel. ç Display:press the cursor right to select On or Off, according to if you want to display the current time on the TV screen or not. 0 Press the B key on the remote control to put the TV set in standby. It will automatically come on at the time programmed. If you leave the TV set on, it will just change programmes at the time entered (and will go to standby mode at the Stop Time). Note: By combining the Child lock and Timer functions, you can restrict the period during which the TV set is used, for example by your children. PIP (Picture in Picture) PIP Combinations MAIN PIP TV/AV/VGA/SIDE TV/AV/VGA/SIDE HD DVI / HDMI PC-D HD DVI / HDMI PC-D TV/AV/VGA/SIDE TV/AV/VGA/SIDE The Picture In Picture feature allows you to call up a subscreen within your main screen enabling you to watch a TV channel, a picture from a device connected to the VGA, AV or SIDE connectors and a picture from a device connected to HDMI/PC-D (e.g. Digital High Definition device), at the same time. & Press the MENU key. é With the cursor, select Features, then PIP. Press the cursor right to select the available PIP sizes: Off, Small, Medium, Large or Side-by-side. When having selected a size, and a device is connected to HDMI/PC-D and switched on, the PIP window automatically appears. Press the P- or P+ key or the digit keys to select the TV/AV/VGA or SIDE pictures or to display the HDMI/PC-D device window in the main screen. Select Horizontal or Vertical to move the PIP window to another corner of the main screen. Note : you can also access the PIP window directly via the æ key on the remote control. - Press the æ key to display the PIP window; - Press the æ key repeatedly to toggle through the various PIP window sizes and select your desired size; - Use the cursor left/right to move your PIP window horizontally or vertically; - Use the P-/+ key to change the programme on the PIP screen. 17
2446.2 en.qxd 03-08-2006 15:32 Pagina 18 Child lock TV Menu Picture Timer Sound Child Lock Features π Contrast+ Install NR Features Colour Temp Timer Lock Channel Child Lock π Change Code Contrast+ Clear All NR Lock All PIP Important: you have forgotten your Access code Remember that 0,7,1,1 is the default Child lock code. If your access code has been changed by someone other than you (a child, for example) or you have forgotten the code, you can always get in by inputting the default code. The Child lock feature receives and processes data sent by broadcasters or other programme providers that contain programme content advisories.when programmed by the viewer, the TV can respond to the content advisories and block program content that may be found objectionable. Child lock allows parents to block out or censor any channels they think children should not watch.a channel blocked cannot be viewed until a correct access code is used to unlock the channel for viewing. & Press the MENU key. é With the cursor, select Features, then Child lock. Press the cursor right to enter the Child lock menu. You are asked to enter your Access Code. Press 0, 7, 1, 1 on the remote control. Incorrect will appear on the screen. Press 0, 7, 1, 1 on the remote control again. New Code will appear on the screen. Enter a new 4-digit code using the number keys. Confirm Code will appear on the screen. Enter your new 4-digit code again. Confirmed will flash on the screen briefly and the highlight bar goes back to Block Channel. Child lock features Lock Channel Select the TV channel you want to block. Press the cursor right to lock the channel. Repeat for any channels you want to lock from viewing. Change Code To change your lock Access Code. Enter your current access code or the overriding code 0,7,1,1 and enter a new personal access code.the previous code is erased and the new code is stored. Clear All To unlock all locked programmes. Lock All To lock all channels and programming at once. In the OFF mode, you go back to the individual locked channels. 18
2446.2 en.qxd 03-08-2006 15:32 Pagina 19 Teletext Only English teletext supported Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press: You will obtain: b Teletext This is used to call teletext, and then exit. on/off The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number. If the channel selected does not broadcast teletext, the indication 100 will be displayed and the screen will remain blank (in this case, exit teletext and select another channel). 0/9 Selecting Enter the number of the page required using the 0 to 9 -P+ a page or -P+ keys. Example: page 120, enter 1 2 0. The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues to search, this means that the page is not transmitted. Select another number. OOOO Direct Coloured areas are displayed at the bottom of the screen. access to The 4 coloured keys are used to access the items or the items corresponding pages. The coloured areas flash when the item or the page is not yet available. i Contents This returns you to the contents page (usually page 100). cursor Enlarge This allows you to display the top or bottom part of the oœ apage page and then return to normal size. g Stop subpage Certain pages contain subpages which are automatically acquisition displayed successively.this key is used to stop or resume subpage acquisition.the indication _ appears top left. : Double page To activate or deactivate the double page teletext display teletext mode.the active page is displayed on the left and the X following page is displayed on the right. Press g if you want to hold a page (i.e. the contents page).the active page is then displayed on the right.to return to normal mode, press X. 19
2446.2 en.qxd 03-08-2006 15:32 Pagina 20 Using in PC monitor mode Your TV can be used as a computer monitor. You must first of all connect the computer, adjust the resolution and refresh rate (see p. 10). Notes: - When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. - For better performance, a good quality HDMI/DVI/VGA cable with good noise isolation filter is recommended. Choosing PC-VGA mode & Press the AV key on the remote control to display the Source list. é Use the keys oœ to select PC-VGA and then press π to switch the TV to PC-VGA mode. To return to TV mode, repeat steps & and é, but select TV instead. Choosing PC-D mode & Press the AV key on the remote control to display the Source list. é Use the keys oœ to select PC-D and then press π to switch the TV to PC-D mode. To return to TV mode, repeat steps & and é, but select TV instead. Using the PC menus PC menu Picture π Brightness Audio Selection Contrast Features Horizontal Reset to Factory Vertical Colour Temp Press the MENU key to access the specific settings of the PC monitor mode. Use the cursor keys to adjust them (the settings are automatically saved). Picture Brightness/Contrast: to adjust the brightness and contrast. Horizontal/Vertical*: to adjust the horizontal and vertical placing of the image. Colour Temp: to adjust the colours (cool, normal or warm). Features Phase Clock Format PIP Auto Adjust Audio selection To choose the sound reproduced on the TV (PC/HD or TV). Note: - You must choose TV mode before going to PC/HD mode. - To listen to the sound from a HD device in PC mode, take care you also connected the audio cables to the HD device. Features Phase/Clock*: eliminates the horizontal (Phase) and vertical (Clock) interfering lines. Format: to choose between large screen (Fullscreen) or the original (Native) format of the PC screens. PIP: change the Size and Position of the PIP window on the screen when the æ key is used. Auto adjust*: position is set automatically. Reset to Factory To return to the factory settings. * These adjustments are not available in PC-D mode. 20
2446.2 en.qxd 03-08-2006 15:32 Pagina 21 Using in HD (High Definition) mode The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the CVI-1, CVI-2 or HDMI input if you are using a HD receiver/equipment that can transmit high definition programming. You must first of all connect your HD equipment (see p. 7). Choosing HD mode & Press the AV key on the remote control to display the Source list. é Depending on your connections, use the keys oœ to select CVI-1 (SD/HD), CVI-2 (SD/HD) or HDMI and then press π to switch the TV to the selected HD mode. To return to TV mode, repeat steps & and é, but select TV instead. Using the HD menus Press the MENU key to access the specific settings of the HD menu. Use the cursor keys to adjust them (the settings are automatically saved). Picture/Sound menu The HD picture/sound settings are the same as the TV picture/sound settings and function exactly the same way as in the TV menu. Features PIP: to adjust the size and position of the PIP screen. Horizontal shift : to adjust the horizontal placing of the image. Vertical shift : to adjust the vertical placing of the image. Kensington Security Slot (if present) Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen.an antitheft Kensington lock has to be purchased separately. The Kensington lock is a plastic-coated steel cable with a lock. One end has to be fixed to the opening of the TV and locked with a special key.the other end is attached to a fixed point. Kensington and MicroSaver are registred US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. All other registered and unregistered trademarks are the property of their respective owners. 21
2446.2 en.qxd 03-08-2006 15:32 Pagina 22 Tips Poor Picture No Picture No picture and power switched on Digital distortion No sound No solution found for your picture or sound problem? Menu Remote control Standby Have you selected the correct TV system in the manual installation menu? Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. See Store TV channels, Manual store,p. 15. Check the HDMI connection. Are the supplied cables connected properly? (The aerial cable to the TV, the other aerial to your recorder, the VGA cables to the display, the power cables.) Has the child lock been switched off? Is your PC switched on? Do you see a black screen and the indicator in front of the TV lights up green, this means that the display mode is not supported. Switch your VGA- or HDMI-source to a correct mode. In case of weak or bad signal, consult your dealer. Your TV has a protective mode in case there is too much heat build-up. Check the clearance around the vents of the device to be certain there are no blocking walls or cabinets which would limit the air flow. The low quality of some digital picture material may be the cause of digital image distortion. In this case select the Soft setting using the Smart picture key a on the remote control. No sound on any channel? Check the volume isn t at minimum. Is the sound interrupted with the mute key? When no TV signal is detected, the TV automatically switches off the sound. This is proper operation and does not indicate a malfunction. Switch your TV off and then on again once. Never attempt to repair a defective TV yourself. Check with your dealer or call a TV technician. Have you selected the wrong menu? Press the MENU key again to exit from the menu. Check if the remote control is in the correct mode. If your TV no longer responds to the remote control, the batteries may be dead. You can still use the MENU key and the -/+ keys on the right side of your TV. Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution. Power consumption: 2 W. Control of accessory devices The infrared signals of the screen may influence the reception sensibility of other peripherals. Solution: replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from within a radius of 1 m. Miscellaneous. Ambient temperature: + 5~ + 40 C. Mains: 50/60 Hz. Auto Voltage ranging from: 110-240V : 42PF7320; 42PF7520Z; 50PF7320; 220-240V : 37PF7320; 42PF7420;. Power consumption: 37PF7320: around 167W; 42PF7320: around 230W; 42PF7420: around 246W; 42PF7520Z: around 305W; 50PF7320: around 420W;. Standby consumption: < 2 W. Weight (excl. packaging): 37PF7320: 23,2 kg; 42PF7320/7520Z: 37,3 kg; 42PF7420: 27 kg; 50PF7320: 50 kg. Dimensions (wxhxd): 37 : 1105x610x97; 42 : 1240x680x104; 50 : 1415x780x104 22