EZ-STATUS WLS8- Multicolor LED Strip Light Datasheet Banner's WLS8- Multicolor LED Strip Lights have sturdy aluminum housings, shatterproof windows, and environmental ratings that make it ideal for harsh indoor and outdoor applications. EZ-STATUS combines lighting and indication in one device to illuminate an area or machine, and show status change Models with or 5 colors available, all with only inputs Four available lengths from 85 mm to 0 mm Daisy chain power to multiple lights Stand-Alone Light or End Light in a Cascade First or Middle of a Cascade Available as stand-alone models, or as cascade models that can be daisy-chained together for a continuous length of lighting, with a minimum of wiring. Stand-alone models have a male quick disconnect at one end for power connection and no connections at the opposite end. A stand-alone model may be used as the last model in the cascade series. Cascade models have a male quick disconnect at one end for power connection, and a female quick disconnect at the opposite end for connecting to other lights in the cascade. A double-ended accessory cordset must be used between each pair of lights in a cascade. Models Family WLS8- Colors -5 Lighted Cascadable and Control Length (mm) Window Construction Voltage Connector X WGRXX 085 D X Q C = Cascadable X = Non-cascadable 085 0570 0850 0 X = Not sealed S = Sealed Blank = m integral cable Q = Integral -pin M/Euro-style quick disconnect* WGRXX = White, Green, and Red with override control GYRXX = Green, Yellow, and Red with override control WYRXX = White, Yellow, and Red with override control WGRYB5 = White, Green, Red, Yellow, and Blue with binary control WGRXX6 = White, Green, and Red with I/O Block control WYRXX6 = White, Yellow, and Red with I/O Block control GYRXX6 = Green, Yellow, and Red with I/O Block control Blank = Clear plastic D = Diffused plastic L5 = 5 lensed window = V * Models with a quick disconnect require a mating cordset Wiring Diagrams Key Pin- Brown: Input Pin- White: Input Pin- Blue: DC Common Pin- Black: Input Original Document 0557 Rev. A 0 May 08 0557
EZ-STATUS WLS8- Multicolor LED Strip Light Color Override Control (Color overrides Colors and, Color overrides Color ) 5 Color Binary Control (Binary input state controls color) Input : Pin Brown Wire Input : Pin Black Wire Input : Pin White Wire LED Color Input : Pin Brown Wire Input : Pin Black Wire Input : Pin White Wire LED Color Light OFF + V dc Color ON + V dc Color ON + V dc + V dc Color ON + V dc Color ON + V dc + V dc Color ON + V dc + V dc Color ON + V dc + V dc + V dc Color ON Light OFF + V dc Color ON + V dc Color ON + V dc Color ON + V dc + V dc Color ON + V dc + V dc Color 5 ON + V dc + V dc Light OFF + V dc + V dc + V dc Light OFF Color I/O Block Control (Input is always ON through the block) Input : Pin Brown Wire Input : Pin Black Wire Input : Pin White Wire LED Color + V dc Light OFF + V dc + V dc Color ON + V dc + V dc Color ON + V dc + V dc + V dc Color ON Specifications Supply Protection Circuitry Protected against reverse polarity and transient voltages Supply Voltage V dc (+ 0% / - 0%) Use only with suitable Class power supply (UL) or a SELV power supply (CE) Lighted Length Typical Current (A) at 5 C Maximum Current (A) 85 mm 0.5 0.00 570 mm 0.60 0.800 850 mm 0.95.00 0 mm.60.600 Leakage Current Immunity 00 µa LED Lifetime Lumen Maintenance - L 70 When operating within specifications, output decreases less than 0% after 50,000 hours Mounting SMBWLS8RA swivel brackets and screws included Connections Integral -pin M/Euro-style quick disconnect Construction Clear anodized aluminum housing; painted zinc end caps; polycarbonate window on clear and diffuse plastic models; acrylic window on L5 models; zinc plated steel brackets Values shown at 5 C - current and lumen values decrease 0.% per C from ambient. For example, a 0 mm unit will have a maximum current of.600 A at -0 C and. A at +50 C. www.bannerengineering.com - Tel: +-76-5-6 P/N 0557 Rev. A
EZ-STATUS WLS8- Multicolor LED Strip Light Light Characteristics Daylight White Efficacy: 85 lumens/watt typical at V dc at 5 C (77 F) CRI: 80, minimum Color Dominant Wavelength (nm) or Color Temperature Lighted Length Lumens (Typical at 5 C) 85 mm 570 mm 850 mm 0 mm Green 55 nm 00 800 00 600 Red 65 nm 85 70 555 70 Yellow 580 nm 570 0 70 80 Blue 70 nm 5 50 75 500 Daylight White 5000 K (±00 K) 650 00 950 600 Environmental Rating Non-sealed models: IEC IP50 Sealed models: IEC IP65, IEC IP67, IEC IP69 Vibration and Mechanical Shock Vibration: 0 Hz to 55 Hz,.0 mm peak-to-peak amplitude per IEC 60068--6 Shock: 5G ms duration, half sine wave per IEC 60068--7 Operating Temperature 0 C to +50 C ( 0 F to + F) Storage Temperature: 0 C to +70 C ( 0 F to +58 F) Application Notes When connecting cascadable lights in series it is important not to exceed maximum current limitations: Maximum length of light at V dc:.0 m (9.8 ft) Do not spray cable with high-pressure sprayer, or cable damage will result Certifications D Dimensions [.55] 8 [.]. [.7] 8 [.0] 9.5 [.7] 9 [.75] 0 [.8] 8 [.0] ø 5 [.0] [.8].5 [.5].5 [.] 0.5 [.] Dimensions are shown with the included SMBWLS8RA brackets. IP50 Models IP67/IP69K Models L L L L WLS8-..085 WLS8-..85S 6 mm (. in) 6 mm (.6 in) 86 mm (.6 in) 6 mm (. in) WLS8-..0570 WLS8-..570S 6 mm (5. in) 68 mm (.7 in) 568 mm (.6 in) 598 mm (.5 in) WLS8-..0850 WLS8-..850S 96 mm (6.5 in) 90 mm (5.8 in) 850 mm (.6 in) 880 mm (.6 in) WLS8-..0X WLS8-..0S 08 mm (7.6 in) 9 mm (6.9 in) mm (.57 in) 6 mm (5.7 in) All measurements are listed in millimeters [inches], unless noted otherwise. Accessories Cordsets Use single-ended cordsets between the power source and the quick disconnect connection of a stand-alone light or the first light in a cascade. Use double-ended cordsets between lights in a cascade. Values shown at 5 C - current and lumen values decrease 0.% per C from ambient. For example, a 0 mm unit will have a maximum current of.600 A at -0 C and. A at +50 C. P/N 0557 Rev. A www.bannerengineering.com - Tel: +-76-5-6
EZ-STATUS WLS8- Multicolor LED Strip Light -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout () MQDC-06.8 m (6 ft) Typ. MQDC-5 MQDC-0 MQDC-50 MQDC-06RA MQDC-5RA MQDC-0RA MQDC-50RA.57 m (5 ft) 9. m (0 ft) 5. m (50 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Right-Angle M x ø.5 [0.57"] Typ. [.6"] M x ø.5 0 Typ. [.8"] = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Cordsets Double Ended Model Length Style Dimensions Pinout MQDEC-0SS 0. m ( ft) MQDEC-0SS MQDEC-06SS MQDEC-SS 0.9 m ( ft).8 m (6 ft).66 m ( ft) 0 Typ. [.58"] MQDEC-0SS MQDEC-0SS MQDEC-50SS 6.0 m (0 ft) 9. m (0 ft) 5. m (50 ft) Straight/ Straight M x ø.5 [0.57"] Typ. [.7"] M x ø.5 [0.57"] = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Cordsets Washdown, Stainless Steel Model Length Style Dimensions Pinout () MQDC-WDSS-006.8 m (6 ft) MQDC-WDSS-05 MQDC-WDSS-00.57 m (5 ft) 9. m (0 ft) Straight Ø5.5 mm.5 mm Ø.8 mm = Brown = White = Blue = Black www.bannerengineering.com - Tel: +-76-5-6 P/N 0557 Rev. A
EZ-STATUS WLS8- Multicolor LED Strip Light -Pin Threaded M/Euro-Style Cordsets Double Ended, Washdown, Stainless Steel Model Length Style Dimensions Pinout MQDEC-WDSS-0SS 0. m ( ft) MQDEC-WDSS-0SS MQDEC-WDSS-06SS 0.9 m ( ft).8 m (6 ft) 0 Typ. MQDEC-WDSS-SS.66 m ( ft) Straight/ Straight M x.9.5 Typ..9 = Brown = White = Blue = Black -Pin Threaded M/Euro-Style Splitter Cordsets Flat Junction Model Branches () Trunk () Pinout CSB-M0M0 No branch No trunk CSB-M0M No trunk CSB-MM CSB-M8M CSB-M5M x 0.0 m ( ft) 0.0 m ( ft).50 m (8 ft).57 m (5 ft) CSB-M5M 7.60 m (5 ft) CSB-UNT5M Ø.5 [0.57"] M x 0 Typ. [.58"] 5 [.8"] Ø.5 [0.8"].0 [.69"] 8.0 [0.7"] 7.60 m (5 ft) Unterminated Typ. [.7"] Ø.5 [0.57"] M x = Brown = White = Blue = Black Brackets SMBWLS8RA The bracket kit is available as a replacement for the one that comes with the Work Light Strip. The kit contains two end brackets and four screws. SMBWLS8SM This kit allows the light to be mounted at a right angle to the mounting surface. The kit contains two end brackets and four screws. P/N 0557 Rev. A www.bannerengineering.com - Tel: +-76-5-6 5
EZ-STATUS WLS8- Multicolor LED Strip Light SMBWLS8SP Stainless steel snap bracket kit Includes two brackets SMH6 This kit allows the light to be mounted to a /6-inch Unistrut channel. The kit includes: #0- spring nuts (qty ) #0- socket head cap screws (qty ) #0 lock washers (qty ) SMBWLSMAG Magnetic mounting bracket for easy attachment to steel surfaces SMBWLSMAGR Protective cover also available to prevent scratches to painted surfaces Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. Banner Engineering Corp. All rights reserved