S--9 OS (Oval ontact System) S IS igh ensity: wide variety of insert arrangements available atterns range from () to (), 00 Ohm differential pairs capable of delivering data transfer speeds of 0bps per pair I--8999 shell styles available from size 9 to 5 ront-release, rear-removable contact system for easy repair eets environmental requirements of I--8999 ses off-the-shelf il Spec backshells ails contacts available, sockets only, epoxy backfilled. IIOS igh Speed pplications-for use with, but not limited to, the following electrical protocols*: 0 ase I ibre hannel (I) 0 ase- S.0,.0 Serial apidio I xpress.0 IW he OS (Oval ontact System) is the newest 8999 Interconnect roduct offering that provides many advantages for high speed data transmission. OS I/YSI IS ating ycles 500 (min.) Operating temperature 65 to 75 ontact materials platings consistent w/s909 OS SI IIY ata rate: 0bps per pair Insertion loss: <0. d up to 5 z eturn loss: >0 d up to 5 z X X: >0 d up to 5 z ifferential to common mode conversion: >50 d up to 5 z lug eceptacle * able selection may limit data rate of protocols. our of mphenol s OS ontacts fit into the 8999 onnector shell size O S: Sra Wildenstein -mail: swildenstein@amphenol-aao.com hone: 607-56-579 all 0-678-0 or visit us at www.amphenol-aerospace.com
OS (Oval ontact System) S--9 OS (Oval ontact System) onnectors OS ontact ye attern at 0 bps.5.... 0.9 0.8 0.7 0.6 0.5 0. 0. 0. 0. 0 0. 0. 0. 0. 0.5 ye diagram (eal art) 0 50 00 50 50 00 Individually Shielded winax cable is recommended for use with the OS connectors. Other type of wires can be used but will not be compatable with the rear accessory supplied with the connectors. elow is a list of recommended cables. dditional cables can be used if they meet specifications. he provided grommet assembly will accommodate cable diameters ranging from Ø. to Ø.75. arger diameters may work based on cable construction. able art umber ore 90- (6 thernet)* ore 90-6 (6 thernet)* airs onductor (W) 00 6 00 ensolite 6/905X-() 00 hermax X00-00 I 0 00 ore S-05-8559-00 (space rated) 00 ore X60 00 *Optimized for -5 insert pattern. OS cable assemblies available consult factory for details Impedance (Ohms) all 0-678-0 or visit us at www.amphenol-aerospace.com O S: Sra Wildenstein -mail: swildenstein@amphenol-aao.com hone: 607-56-579
OS (Oval ontact System) all 0-678-0 or visit us at www.amphenol-aerospace.com OS (Oval ontact System) onnectors Insert rrangements - ront face of pins illustrated S--9 5-5 -5-5 9-5 5-59 Insert rrangement 9-5 -5-5* 5-5 5-59* umber of ontacts 6 5 OS, Insert rrangement -58* 5-9* umber of ontacts 8 Insert rrangement 7-65 9-86* -57* umber of ontacts 8 0 7-65 -57 5-5 -5-5 9-5 7-65 9-86 X Y W 5-9 -58-57 5-59 * Indicates Insert currently tooled esignates pin location within the OS contact assembly 5-5 -5-5 9-5 7-65 9-86 X Y W 5-9 -58-57 5-59 5-5 -5-5 9-5 9-86 -57
OS (Oval ontact System) S--9 OS (Oval ontact System) onnectors 00 - rimp, etal 00 - rimp, omposite Wall ounting eceptacle S S S O ISIOS S OI S.005. S * Shell Size hread lass 0.-0.- S (lated) ax. () ax. () +.000.005 () +.000.005 () S ax. ±.008 ack anel ount ront anel ount ax. anel hickness +.006.000 () ±.005 () ±.008 hread etric 9.650.09.086.80.77.79.59.98.8.655.85..905.908.6 X-6g.7500.09.086.80.77.8.79.0.8.796.96..905.908.9 5X-6g.8750.09.086.80.77.906.8.7.8.9.08..905.908.9 8X-6g 5.0000.09.086.80.77.969.906..8.07.9..905.908.7 X-6g 7.875.09.086.80.77.06.969..8.9.57..905.908.9 5X-6g 9.500.09.086.80.77.56.06.9.8.97.75..905.908.9 8X-6g.750.069.8.790.7.50.56.575.8..59.0.905.90.9 X-6g.5000.069.8.790.7.75.50.70.5.57.7.0.905.90. X-6g 5.650.069.8.790.7.500.75.8.5.67.89.0.905.90. 7X-6g ed b indicates fully mated * dimensions are larger than stard 8999 dimensions to accomodate backshell. ll dimensions for reference only. he rear accessory shown above is provided kitted with each connector is for environmental sealing. he grommet included is insert arrangement specific, shown at right is the -5 pattern. he provided grommet assembly will accommodate cable diameters ranging from Ø. to Ø.75. arger diameters may work based on cable construction. Integral ackshell Style all 0-678-0 or visit us at www.amphenol-aerospace.com headed ackshell Style
OS (Oval ontact System) S--9 OS (Oval ontact System) onnectors 06 - rimp, etal 06 - rimp, omposite Straight lug Z.59.00.000.85 X SSY OWI OS Q Shell Size hread 0.-0.-S- (lated) Q ia. ax. hread etric 9.650.858 X-6g.7500.98 5X-6g.8750.57 8X-6g 5.0000. X-6g 7.875.06 5X-6g 9.500.56 8X-6g.750.6 X-6g.5000.768 X-6g 5.650.890 7X-6g ll dimensions for reference only. he rear accessory shown above is provided kitted with each connector is for environmental sealing. he grommet included is insert arrangement specific, shown at right is the -5 pattern. he provided grommet assembly will accommodate cable diameters ranging from Ø. to Ø.75. arger diameters may work based on cable construction. Integral ackshell Style all 0-678-0 or visit us at www.amphenol-aerospace.com headed ackshell Style 5
OS (Oval ontact System) S--9 OS (Oval ontact System) onnectors 07 - rimp, etal 07 - rimp, omposite am ut eceptacle.06 I -.5 X ISS * SSY OWI OS -O OI S S ( ).898 X ll dimensions for reference only. hread lass ex Shell 0.-0.- +.00 +.000 +.07 S hread Size S (lated) ax..000.00.06 ef. ±.00 etric 9.650.99.69.657.875.87.06 X-6g.7500.86.85.770.000.87.50 5X-6g.8750.5.00.955..878.75 8X-6g 5.0000.66.5.085..878.500 X-6g 7.875.76.60.0.8.878.65 5X-6g 9.500.99.85.5.56.878.8 8X-6g.750.07.50.60.688.878.98 X-6g.5000.99.65.585.8.878.06 X-6g 5.650..760.70.000.878. 7X-6g ed b indicates fully mated *.059 dia min., lockwire holes, ormed lockwire hole design (6 holes) is optional he rear accessory shown above is provided kitted with each connector is for environmental sealing. he grommet included is insert arrangement specific, shown at right is the -5 pattern. he provided grommet assembly will accommodate cable diameters ranging from Ø. to Ø.75. arger diameters may work based on cable construction. Integral ackshell Style all 0-678-0 or visit us at www.amphenol-aerospace.com headed ackshell Style 6
OS (Oval ontact System).... 5. 6. onnector ype Shell Style Service lass Shell Size Insert rrangement ontact ype lternate eying osition 00 ZW 5. S O Y ri-start Series onnector with metal shells ack panel mounted receptacle with metal shells ri-start Series onnector with composite shells ack panel mounted receptacle with composite shells. S S SY 00 Wall mount receptacle 06 Straight plug 07 am nut receptacle (Z) hreaded ackshell Style. S SI SS (W) Integral ackshell Style* escription Z W lectroless nickel plated Z W lectroless nickel plated ground plane ZW WW Olive drab cadmium plate Olive drab cadmium plated ground ZW WW plane Z W ilronze Z W ilronze ground plane Z W orrosion resistance stainless steel Z W Stainless steel ground plane Z W urmalon plated, ickel- alternative to cadmium Z W roundplane urmalon * Integral ackshell - an integral backshell style eliminates the need for costly backshell accessories, allows the user to attach the shield of their cable directly to the backshell. he integral shell style also provides superior I shielding ease for overmold applications. or unused OS connector cavities: eave the contact insert cavity empty in the connector. Size S788-- (orange color) sealing plug can be installed into the grommet of the backshell large end first. emoval ool OS ontact 0-660-00 (front face shown) otice: Specifications are subject to change without notice. ontact your nearest mphenol orporation Sales Office for the latest specifications. ll statements, information data given herein are believed to be accurate reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement are not recommendations to infringe any patent. he user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical may not apply to all connectors. O is a registered trademark of mphenol orporation. 06 mphenol orporation : /8/06 S S S I YWY S all 0-678-0 or visit us at www.amphenol-aerospace.com S I YWY (front face shown) S S S S--9. Select a Shell Size Insert rrangement Shell Size Insert rrangement are together. irst number represents Shell Size, second number is the Insert rrangement. See page 7 for Insert rrangements. 5. S O Y in contacts -0585-00 S Socket contacts -0586-00 Inner contacts accept 8, 6, awg cable. 6. Select an lternate eying osition lternate ositions below not required for normal position. plug with a given rotation letter will mate with a receptacle with the same rotation letter. S SIZ 7, 7 9,, 5 7 9,, 5 5,, 7 Y & YWY IIIIO * * * * * * S 0 55 05 0 5 6 9 95 90 5 9 5 5 9 66 6 79 5 9 66 6 79 5 9 66 6 79 S 0 8 0 75 97 8 55 56 5 56 6 70 69 5 5 70 69 5 5 70 69 5 5 S 5 8 0 05 97 08 8 95 0 76 8 96 97 96 97 S 65 0 75 0 0 6 9 5 55 98 9 0 57 7 9 0 57 7 9 0 57 7 7