INR PRICE LIST No. DFL/07 th Effective 1 May, 1.
Limited Warranty And Exclusive Remedy Deepak Fasteners through its Unbrako Division warrants that these products conform to industry standards specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its sole determination were not manufactured in compliance with the warranty given above. The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak Fasteners to give any other warranty, written or oral, pertaining to the products.. Disclaimer All information contained in this catalogue has been prepared to assist users in their requirements for Fasteners. The information is based on Fastener Standards. All such source material and information beyond the control of Deepak fastener Ltd (DFL) is subject to change.. Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss resulting from the use of any information contained in this catalogue. Customers are advised to make their own enquiries or seek independent advice regarding the fitness and suitability of the products listed.. Deepak Fasteners Ltd. has the right to change the price, specifications and other particulars contained in this pricelist, without any prior notice. The products listed in this catalogue might not be stocked at DFL at all times and customers are advised to enquire the availability of the same. E. & O.E.. Note Surface Finish : All the products, unless otherwise order, are supplied in black thermal finish with a coat of rust preventive oil. Packing Plating : All products are supplied in standard packing as described in respective price tables. For sizes M (1/) and above % extra packing charges will be applicable if the order quantity is less than one carton. : No guarantee can be given for Unbrako products which are plated by users or by outside plates, who may not have considered hydrogen embrittlement problem. The Price, specifications and other particulars contained in this pricelist are subject to change with notice.
About Us Unbrako Unbrako is a single source, full service provider of engineered, high strength precision fasteners for industrial, infrastructure, petrochemical, automotive and other custom designed applications where Quality, Performance and Reliability make the difference. Unbrako products are primarily used in performance critical applications and incorporate unique design and workmanship features that enable them to withstand high fatigue loads and cycles over prolonged periods. Unbrako's manufacturing and engineering facilities operate around the clock to cater for the needs of its customers.
Unbrako DFL Global Strength Since 1911, Unbrako has been a leader in advancing the technology of bolted joints and meeting the needs of industry for stronger and better performing fasteners. Products such as the famous Unbrako socket head cap screw and Durlok fasteners are the solutions of choice for engineering applications across the world. Today, Deepak Fasteners (DFL) along with its Unbrako division operates in over countries across continents and supplies the automotive, aerospace, engineering and construction industries with advanced products and sophisticated fastening solutions. Commitment To Excellence Unbrako is committed to total customer satisfaction. This is achieved through continuous improvement in every operational aspect, via Unbrako Quality Assurance system that aims at Zero defect manufacture and supply. Unbrako's True goal is to provide the best solution at optimal cost, every time and on time.
Capabilities With advanced manufacturing, engineering and logistics facilities such as modern cold heading and thread rolling, state-of-the-art heat treatment plant and a sophisticated sourcing and logistics network, Unbrako provides a full-service package, designed to suit customer needs. Unbrako is equipped and prepared to provide technical support through the entire design, development and manufacturing/supply cycle. Unbrako's focus is on building long term relationships with its customers and raw material or part supply partners, ensuring better understanding of customer needs and resulting in superior customer satisfaction. Supply Chain Utilizing the international network of DFL and allied companies and focusing on the long term relationships, Unbrako, with ISO/TS accreditation, provides a full range of offerings including sourcing and procurement of complete range of industrial fastening hardware (bolts, screws, SEM's, nuts, studbolts, self locking fasteners, thread forming fasteners etc.) and full-service supply of complete hardware packages to a plant or production line. Full-service supply includes engineering and design support, procurement and purchasing services, localized warehousing and transport, a variety of packaging options and choice of delivery frequencies - they are all available to provide the right answer to any customer need.
Our Commitment To Quality Unbrako ISO 9001: CE CERTIFIED: 199 & 1 ISO / TS 199: SELLIHCA ID. 19 DELTA DORKEN APPROVAL WRC PT//009
Quick Production Selection Guide Socket Head Cap Screws Socket Countersunk Head Screws Socket Button Head Cap Screws Socket Head Shoulder Screw PRODUCT TENSILE STRENGTH Property Class Psi. Min. N/mm 190000 1,00 (1.9) Metric M to M 10000 1,0 (1.9) M to M -- 1,0 (1.9) M to M1 SIZE RANGE Diameter -- (1.9) M to M -- Inch* Metric Inch* IS ISO DIN BS ANSI JIS 1/ to 1 to 00 mm /1 to 9 7 91 1 70 B1..1M B117 /1 to / 71 -- 7991 1 B1..M -- to 0 mm to 70 /1 1.1/ -- to -- -- 70 97 1 B1..M -- mm -- to 1 mm EQUIVALENT STANDARDS -- -- 779 91 1 -- -- Socket Set Screws Knurled Cup Durlok Bolt Hex Wrenches Hex Head Bolts 00/0 (.) 1,00 (.9) Hardness HRc Min. Hardness HRc 7 Min. Grade R,S V M to M 1. to mm M to M 1/ to / -- 1.9 M to M -- 1/1 to / 1/ to to mm /1 to 1 to 0 mm -- -- to 00 mm 09 0 07 0 09 91 91 91 91 1 70 -- 0 9 911 1 70 1/ 1 01 to 017 1 91 9 17 B1..M As Per Unbrako Specification B1..M B1..1 B1177 B B110 Hex Nuts Nut Grade / Nut Grade / M to M7 1/ to 1-1/ -- -- 1 0 9 17 B1...1M B1.. B111 High Strength Bolts -- 0 to -- 77 71 91 9 B1...7M B11 Structural Bolts, Nuts,./.9 Nuts -- M1 to M0 00 mm 9 77 71 91 91 B1...M Washers / Stud With Stud B7 1/ 0.1/ A19 Heavy nuts Special Products Nut H -- 00/0 (.) 1,00 (.9) M1-M M to M to -1/ 1/ to 1 to 0 mm to mm to 7 / to 1 A19 As per customer specifications *Thread type in any of the following inch series : BSW, BA, UNC & UNF. ** Thread type in NPTF Note : UNBRAKO standards meet, or in many instances, exceed the requirements of the standards listed. Plating : No guarantee can be given for UNBRAKO products which have been plated by the users and / or outside plates, who may not have considered hydrogen embrittlement problem. 1
Unbrako Thread Size Comparison METRIC PRODUCTS UNIFIED INCH PRODUCTS B.S. INCH PRODUCTS SIZE THREAD PITCH & T.P.I. COARSE PITCH (mm) T.P.I. PITCH (mm) FINE T.P.I. Major Dia mm Inch SIZE T.P.I. Major Dia UNC UNF inch SIZE T.P.I. BSW BSF Major Dia inch T.P.I. BA Major Dia inch M 0. 1.00 0.11 # 0 0.1 1/ 0-0.1 # 0 0.1 BA.1 0.1 BA. 0.1 M 0.70.00 0.17 # 0.1 BA 0.17. 0.11 M 0.0.00 0.197 # 0.190 /1 BA 1. 0.1 1 BA. 0.9 M 1.0.00 0. 1/ 0.0 1/ 0.0. 0. 0 BA M 1. 1.00.00 0.1 /1 1 0.1 /1 1 0.1 M 1. 17 1..00 0.9 / 1 0.7 / 1 0.7 7/1 1 1 0. M1 1.7 1. 1. 1.00 0.7 1/ 1 0.0 1/ 1 1 0.0 (M1).00 1. 1. 17 1.00 0.1 M1.00 1. 1. 17 1.00 0.0 / 11 1 0. / 11 1 0. (M1). 1. 17 1.00 0.709 M. 1. 17.00 0.77 / 1 0.7 / 1 0.7 (M). 1. 17.00 0. 7/ 9 1 0.7 7/ 9 11 0.7 M.00..00 1.00 0.9 1 1 1.000 1 1.000 1-1/ 7 1 1.1 1-1/ 7 9 1.1 (M7).00..00 1 7.00 1.0 M0. 7..00 1 0.00 1.11 1-1/ 7 1 1.0 1-1/ 7 9 1.0 (M). 7..00 1.00 1.99 1-1/ 1 1.0 1-1/ 1.0 M.00.0.00..00 1.17 (M9).00.0.00. 9.00 1. M..0.00..00 1. Note : Sizes in brackets are non-preferred standards Plating : No guarantee can be given for UNBRAKO products which have been plated by the users and / outside plates, who may not have considered hydrogen embrittlement problem.
Socket Head Cap Screw M WRENCH.mm 0 Pcs M WRENCH 1.mm 1 1 0 0 0 Pcs M. WRENCH mm 0 Pcs 11 1 1 1 17 19 1 1,0 0 70 0 90 00 0 0 0 0 0 0 0 11 1 1 1 1 0 0 7 90 0 0 0 0 0 1 00 197 11 170 00 11 0 01 19 007 7000 1 79 9 7 90 0 0 0 0 0 0 0 M WRENCH mm 0 Pcs M WRENCH mm 0 Pcs M WRENCH mm 0 Pcs 11 119 177 01 7 11 01 019 01 0 0 00 10011 7 7 0 1 0 7 79 1 1,1,9 0 0 0 0 0 0 0 0 11 1 19 0 11970 19 09 119 00 01 0 0 00 70007 077 11 1 1 1 7 0 0 0 1,0 1,7 1, 1,9 1,0 1,90, 0 0 0 0 0 1111 17 0 119790 11997 111 190 17 17 11 111 1 07 0 09 01 0 0 0 717 7 7 7 0 9 717 77 9 1,70 1,7 1,1,01,1,,,7 0 1 1 0 0 0 70 7 0 90 0 1 Metric
Unbrako 1 1 0 0 0 70 7 0 90 0 1 1 10 10 1 10 170 10 0 0 0 0 Socket Head Cap Screw 0 1197 0 1 1191 119 111 111 17 1 0 170 0 0 09 070 07 07 07 077 0 1 M WRENCH mm 0 Pcs 91 9 0 7 7 0 7 1,01 1,07 1,17 1,77 1,9 1, 1,7,7,7,1,909,,0,9,, 0 0 0 0 0 0 0 0 0 0 7 00 111 110 111 117 0 1 10 07 117 0 17 090 091 09 09 09 097 0 1 1 M WRENCH mm 0 Pcs 1, 1,09 1,07 1,0 1,19 1,19 1, 1,0 1,71 1, 1,999,10,,0,0,91,9,0, 7,91,9 9,97 11,1 1,1 1,07 0 0 0 0 0 0 0 0 0 1107 1 11 10 1199 117 110 1 10 11 09 099 0 11 1791 7 1 7 1 7 79 0070 1 0071 007 007 M1 WRENCH mm 0 Pcs,0,,1,7,7,99,1,70,0,00,1,07,99,7,9, 7,0,0 9,1, 1,0 1, 1,,091 1, 7,0, 7,1 9,9 M1 WRENCH 1mm 0 Pcs Metric 0 0 0 0 0 00 009 000 001 00 1 00 110 00 00 00 007 00 009 000 00 10 10 10 10 107,9,9,99,,199,1,,70,79,1,09,917 7,07,7 9,, 11, 1,7 1,91 1,17 1,0 1,9 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 9, DIN : 91, ISO : 7.. Threads : ISO Metric (Coarse Series) gg as per IS : 1, ISO : 1, ISO : 9.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part I.. Note : Upto 0MM Dia can be manufactured against request.. For sizes beyond those listed, prices on application.
Socket Head Cap Screw 0 0 0 70 7 0 90 0 1 1 10 10 1 10 170 10 0 0 0 0 00 11 11 171 11 117 117 119 11 119 1 1 1 1 1 1 17 1 19 101 70 7 007 11 007 007 0077 007 M1 WRENCH 1mm 0 Pcs,79,79,79,77,,97,7,09,1,0,7,,97 7,7,09 9,, 11,791 1,7 1,,79 9,0 9,0,97,0,1,7,,1 7,07 19 001 00 000 0 00 00 00 00 007 009 00 001 00 00 1011 109 1007 100 01 M1 WRENCH 1mm 0 Pcs 1,97 1,1 1,10 1, 1, 1, 1,9 1, 1, 1,7 17,0 17, 1,,1,0,7,, 0,07,009 1,1 1 7 7 10 11 1 1 17 1 11 1 1 1 1 1 1 1 11 1 7 109 7 7 00 101 00 00 00 007 M WRENCH 17mm 0 Pcs 1,1 1,1 1,9 11,991 1,07 11, 1, 11,71 1,1 1,97 1,1 1,717 1,77 1, 17,09 1,7,7,009,77 1,7,, 7, 9,97,71 1,7 7,7 9,7 9,17 M WRENCH 17mm 0 Pcs Metric 1011 101 101 101 101 7 101 1017 101 1019 10190 10191 1019 1019 1019 1019 1019 9 11 1 1,7 1,7 19,7 1, 1,,17,1,7,9 9,11 1,7 1,0,7,9 7, 1,1 7,9 9,,91 111,0 119,19 17, Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 9, DIN : 91, ISO : 7.. Threads : ISO Metric (Coarse Series) gg as per IS : 1, ISO : 1, ISO : 9.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part I.. Note : Upto 0MM Dia can be manufactured against request.. For sizes beyond those listed, prices on application.
Unbrako 0 70 7 0 90 0 1 1 10 10 1 10 10 0 0 0 00 Socket Head Cap Screw 1 1 17 1 19 10 11 1 1 1 1 17 1 170 171 1 1 17 000 001 00 00 00 M WRENCH 19mm 0 Pcs 1, 1, 1,7 17,1 1,0 19,7, 1,70,,07,19,9 0,1,,,0 0,1,,99 7,0 7,777 79,1,01 M7 WRENCH 19mm 0 Pcs,11, 7,11 0,9,7,0 9,1,,9,009 91,7 1,00 9,0 1,970 11,77 1,19 17, 1,11 M0 WRENCH mm 0 Pcs Metric 1,1 1,,9,9 7,7 9,19,7, 9,1,97,9,07 7,9 9,1,99 10,7 10,9 19,99 19, 19,7 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 9, DIN : 91, ISO : 7.. Threads : ISO Metric (Coarse Series) gg as per IS : 1, ISO : 1, ISO : 9.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part I.. Note : Upto 0MM Dia can be manufactured against request.. For sizes beyond those listed, prices on application.
Socket Head Cap Screw 7 0 90 0 1 1 10 10 1 10 10 0 0 0 00 M WRENCH mm 0 Pcs,91,91 0,79,9,7 7,01 7,7 1,1,1 11,9 1,71 1,90 19,19 1,19 190,1 1,11 1,1 M WRENCH 7mm 0 Pcs,9 71,97 7,1 77,99 0,71,1 9,09 9,1 1,0 1, 1,0 19,7 197, 11,,0 9,7 M WRENCH mm 0 Pcs,7 1,9 11, 1, 19,99 1, 1,17 19,79 1,1 0,1 0,9 01,07 1,19 1, 1,7 Metric Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 9, DIN : 91, ISO : 7.. Threads : ISO Metric (Coarse Series) gg as per IS : 1, ISO : 1, ISO : 9.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part I.. Note : Upto 0MM Dia can be manufactured against request.. For sizes beyond those listed, prices on application. 7
Unbrako Socket Head Cap Screw Inch /1 WRENCH / mm 0 Pcs 1/ WRENCH /1 mm 0 Pcs /1 WRENCH 7/ mm 0 Pcs / WRENCH /1 mm 0 Pcs / 000 0 000 7 1/ 0007 0 0009 7 000 001 99 / 000 77 00070 000 7 00 9 / 0009 0 00071 7 0007 00 00 1 7/ 0007 000 00 9 1 0001 0007 0009 9 00 9 1-1/ 000 1 0007 0 00090 77 00 1,0 0 1-1/ 000 7 0007 71 00091 007 1,1 0 1-/ 000 0007 0009 1,01 0011 1,7 000 00077 0009 1,01 009 1,1 0-1/ 1 77 0007 1, 0009 1,1 001 1, 0-1/ 000 00079 1,71 0009 1,1 0 00111 1,7 0 -/ 0000 1,91 0 1, 0 0011 1,9 0 0001 1,91 0009 1, 0 0011 1,9 0-1/ 000, 70,1 0 0011,90-1/ 000, 0009,1 0 0011,97 000,7 0 00099,9 0 0011,9-1/ 000,19 0 00117,1 700, 0 0011, -1/ 0011 7,1 00119 7,77 Grey highlighted items are full threaded 1. Specifications : Generally conforming to BS : 70.. Threads : BS Whitworth Fine, Medium as per BS :.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : As per BS 70. Note : Upto Inch Dia can be manufactured against request.
Socket Head Cap Screw / 7/ 1 1-1/ 1-1/ 1-/ -1/ -1/ -/ -1/ -1/ -1/ -1/ -1/ 7 7-1/ -1/ 9 0011 001 001 001 001 709 0017 7 001 0019 9 0 1 7/1 WRENCH /1 mm 0 Pcs,,,9,,,7,91,1,9,,,97 7,09 7,09,0,09 0 0 0 0 0 0010 09 0011 001 001 001 001 001 0017 001 0019 0010 0011 001 001 001 001 001 0017 001 0019 1/ WRENCH / mm 0 Pcs,0,0,7,,7,9,71,1,0,0,,0,0,, 7,1,,9 17,70 1, 19,9, 0 0 0 0 1 1 001 0011 001 001 001 001 001 0017 001 709 0019 0010 0011 001 001 001 001 001 0017 7 / WRENCH 1/ mm 0 Pcs,919,919,7,,707,91,7,7,1,1,7,,17, 9, 11,9 1,901 7,0 7,0, 0, 9,7 99 1 Inch 1 1 Grey highlighted items are full threaded 1. Specifications : Generally conforming to BS : 70.. Threads : BS Whitworth Fine, Medium as per BS :.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : As per BS 70. Note : Upto Inch Dia can be manufactured against request. 9
Unbrako Socket Head Cap Screw Inch / WRENCH 9/1 mm 0 Pcs 7/ WRENCH 9/1 mm 0 Pcs 1 WRENCH / mm 0 Pcs 1 9 1,77 1-1/ 001 1,77 1-1/ 0019,7 0017 17, 1,90 1 1-/ 00170 11,07 1,17 1,7 1 00171 11,07 001 1,17 0019 17,1-1/ 0017 11,1 07 19,7 071 1, -1/ 0017 11,1 0019 19,7 0019 1, -/ 0017 1,7 1,99 1,01 0017 1,7 00190,00 0019 1,01-1/ 0017 1,77 7011, 7,10-1/ 00177 1,77 00191, 00197,10 0017 1,07 0019,0 0019,0-1/ 00179 17,0 7011 0, 00199,1 0010 1,7 70117,1 00 0,90-1/ 70011,1 7,1 17,09 001, 0019,7 001,90-1/ 001 9,,00 9 9,0 7 001 0, 70119,00 00 1,19 7-1/ 0 0,90,19 0,1 001 1, 1 7,77 00, -1/ 1, 71,7 1 71, 9 001, 71,7 7,9 70117 0,9 1, Grey highlighted items are full threaded 1. Specifications : Generally conforming to BS : 70.. Threads : BS Whitworth Fine, Medium as per BS :.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : As per BS 70. Note : Upto Inch Dia can be manufactured against request.
Socket Countersunk Head Cap Screws (CSK) M WRENCH mm 0 Pcs M WRENCH.mm 0 Pcs M WRENCH mm 0 Pcs M WRENCH mm 0 Pcs Metric M WRENCH mm 0 Pcs 77 0 919 09 99 1 7 0 97 11 99 19 1 0 1,09 1 9 9 9 7 7 1 0 1, 1 9 1 9 0 17 7 0 1,1 1 17 1 1 0 0 7 1, 1 719 719 77 1 90 0 17 9 9 9 1,0 1 1,0 9 1,17 1,011 1,17 0 1,99 1,0 1,17 1,1,170,09,00 97 1,7,11 7, 9,7 11,1, 1,1 0 1,07 Qty. Per 1. Note : All sizes are fully threaded.. Specification : Generally conforming to IS : 71, DIN 7991.. Threads : ISO Metric, gg as per IS : 1.. Material : UNBRAKO High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part - 1 11
Unbrako Socket Countersunk Head Cap Screws (CSK) 1 0 0 0 70 7 0 90 0 1 1 10 Qty. Per M WRENCH mm 7 9 1 0 0 0 1 1 1 17 1 19 0 0 Pcs 1,19 1,11 1,9 1, 1,70 1,9,,,1,07,1,7,1,91, M1 WRENCH mm 7 11 1 1 1 0 Pcs,179,9,,97,7,7,1,7,,7,,7 M1 WRENCH mm 9 0 1 1 190 1 91 0 Pcs,9,0,1,9,1 7, 7,,,7 9,1,7 11,1 1,77 M WRENCH 1mm 7 191 191 9 1 9 0 1 0 Pcs,7 11, 1,9 1,9 1,70 1,0 1,7 1,,1 1,,1 7, 9,9 1,90 019 0190 0191 019 019 701 1179 701 Metric M WRENCH 1mm 0 Pcs 19,7 1,9,0,9,,00 9,7,9 7,,00, 1,0 per box per box 1. Note : All sizes are fully threaded.. Specification : Generally conforming to IS : 71, DIN 7991.. Threads : ISO Metric, gg as per IS : 1.. Material : UNBRAKO High Grade Alloy Steel.. Mechanical Properties : Property Class 1.9 as per IS : 17, ISO : 9 Part - 1. Bold black lines are used to indicate quantity per box. 1
New Socket Head Shoulder Screws M (M) WRENCH mm 0 Pcs M (M) WRENCH mm 0 Pcs M (M) WRENCH mm 0 Pcs M1 (M) WRENCH mm 0 Pcs 1 1 1 0 0 0 70 0 90 0 01 70 7 7,7,,,,, 7,1,19 7 01 77 79 0 1,7,9,9,9,0 7,17, 9, 017 90 9 9 9 9 9 0,919,0,7 7,1,,1, 11,1 1, 1,091 01 0 0 07 11 1 1 17 7 1,1 7,91,70 9,70,9 1,9 1,190 1,11 17,11 17,900 1,11 1, M1 (M1) WRENCH mm 0 Pcs M (M1) WRENCH mm 0 Pcs M (M) WRENCH 1 mm 0 Pcs 0 0 0 70 0 90 0 1 7 0 1,0 19,,7,1,0 9,9 0,999,709, 1 9 7,1 1,07,9,907, 7,7 0,9 9,9 01 019 0190 0191 019 019 019 1,17 170,7 1,7,0 1,90 9,1 9,0 1. Specification : Generally conforming to BS: 1, DIN 91, ISO 779.. Thread Class : gg (Precision Ground to h tolerance on the Shoulder (Size Indicator Ground Diameter). Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Properties Class conforming to 1.9 as per ISO: 9 Part-I.. Method of Specifying : The nominal diameter of a shoulder screw is the diameter of the shoulder & not the thread diameter but it is recommended that both are quoted, e.g. 1mm (M1) x 70mm long to BS 1. Separate catalogue is available on request 1
Unbrako Socket Set Screws (Grub Screws) Metric Knurled cup point M Wrench 1. mm M Wrench mm M Wrench. mm M Wrench mm M Wrench mm 0 Pcs 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1 1 0 0 0 Qty. Per 07 17 17 17 177 17 179 10 9 1 1 7 1 1 1 17 1 19 191 19 70191 09 179 10 70 70 7 7 9 1 9 1,079 1, 1,7 19 19 19 197 19 199 11179 9 17 191 191 7 91 9 9 1,00 7 9 11 1 1 17 1 19 1 191 7 1 71 9 1,0 1,1 1,71 1000 7 9 0 1 7 70199 0 9 9 97 0 91 7 1,0 1,1 1,79,,1,791 1. Specification : Generally conforming to the following standards. Threads : ISO Metric, gg as per IS:1. ISO 1, ISO 9.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Property Class H as per IS : 17, ISO:9 Part V.. NOTE : PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE % EXTRA. ISO ISO-0 ISO-07 ISO-0 ISO-09 1
Socket Set Screws (Grub Screws) Knurled Cup Point Metric M Wrench mm 0 Pcs M1 Wrench mm 0 Pcs M1 Wrench mm 0 Pcs M Wrench mm 0 Pcs 10099 1 17 1 9 9 1 9 1,9 0 9 79 7 1, 19,70 7 7 0 1,091 7 1,99,9 0 9 1,00 1 1,1 77,0 7,0 1 1, 1,71 7,,91 0 1, 1,99 79, 9 7,7 1, 9,9 1,70 90, 1, 70,0,7 9 9,9 9,9 71,97, 9 11,1 0 1091, 7,, 9 11,0 99,70 10, 1 7,1 1 1,0 70 11,99 1790 9, 1 1,0 7 1,9 17 1, 0 1,90 Qty. Per 0 per box 1. Specification : Generally conforming to the following standards ISO Metric, gg as per IS:1. ISO 1, ISO 9. Unbrako High Grade Alloy Steel.. Threads :. Material :. Mechanical Properties : Property Class H as per IS : 17, ISO:9 Part V.. NOTE : PRICE FOR SPECIAL POINT SHOWN BELOW WILL BE % EXTRA.. Bold black lines are used to indicate quantity per box. ISO ISO-0 ISO-07 ISO-0 ISO-09 1
Socket Set Screws (Grub Screws) /1 Wrench / mm 0 Pcs 1/ Wrench 1/ mm 0 Pcs /1 Wrench / mm 0 Pcs Unbrako / Wrench /1 mm /1 1/ /1 / 1/ / / 1 1 1/ 1 1/ 1 / 0099 0091 009 009 009 19 009 0097 17 191 191 7 7 1 7 0091 009 009 0097 0099 00970 0097 0097 0097 1 1070 1 0 71 7 90 1,1 1, 009 00977 0097 00979 0090 009 009 009 19 009 0 01 9 71 1, 1,1 1,7 009 0099 00990 00991 0099 0099 0099 0099 00997 Qty. Per 0 0 Pcs 7 9 9 1,7,0,9 Inch 1/ Wrench 1/ mm 0 Pcs / Wrench /1 mm 0 Pcs 1/ 00 1 / 00 700 01 1, / 00 01 1,7 1 00 1,091 017,01 1 1/ 009 1, 01, 1 1/ 00, 019,9 1 / 01,0 0,1 01,07 01,7 1/ 01, 0,0 700 7,77 0,90 Qty. Per 0 / Wrench / mm 0 0 11 0 07 0 09 00 0 Pcs,77,,9 7,7 9,1,7 1,1 1,90 1. Specification : As per standard ASME/ANSI:B1... Threads : BS Whitworth, Medium as per BS :. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : As per BS : 70.. NOTE : PRICES FOR SPECIAL POINTS % EXTRA.. Socket set screws with BSF/UNC/UNF threads can also be manufactured subject to MOQ. Price on request. 7. Bold black lines are used to indicate quantity per box. 1
New ISO Metric Button Head Socket Screws M Wrench mm M Wrench.mm M Wrench mm M Wrench mm 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1 1 1 1 0 10 7 9 0 0 1 70 91 10 0 1 011 9 9 9 9 7 7 109 1017 0119 7 09 01 9 70 9 99 9 9 1, 7 1,1 91 1,00 109 7 7 01 7 01 7 7 7 1,771 7 7 7 7 09 0 M Wrench mm 0 Pcs M Wrench mm 0 Pcs M1 Wrench mm 0 Pcs 1 1 1 0 0 79 0 01 9 90 1,079 91 9 9 91 1,1 1,90 1,71 1,79 9 9 9 99 01 0 1,7 1,7 1, 1, 1,1,00 0 0 0 0 0 07 0 1,1,00,1,9,,07,1 0 0 0 0 0 1. Specification : Generally conforming to BS: 1.. Thread : ISO Metric (Coarse Series) gg.. Material : Unbrako High Grade Alloy Steel.. Mechanical Properties : Properties Class conforming to 1.9 as per BS:, ISO: 9 Part-I. 17
Hex Head Bolts/Screws Metric M M M M 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1 1 1 0 0 0 70 7 0 90 0 1 1 10 10 1 170001 17000 17000 17000 17000 17000 170007 17000 170009 1700 170011 17001 0001 000 7 71 71 70 79 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 17001 17001 17001 17001 170017 17001 170019 1700 17001 1700 1700 1700 1700 1700 17007 1700 000 7 1 1 7 70 70 9 9 1 7 779 0 0 0 0 0 0 0 0 0 0 0 0 0 17009 17000 17001 1700 1700 1700 1700 1700 17007 1700 17009 17000 17001 1700 1700 1700 1700 1700 17007 1700 117 7 9 1 9 7 7 9 19 71 0 7 70 71 7 7 91 1,9 1,7 1,97 1,1 1,9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 17009 1700 17001 1700 1700 1700 1700 1700 17007 1700 17009 17000 17001 1700 1700 1700 1700 1700 17007 00 0011 001 1 70 70 7 91 1,01 1,0 1,10 1,1 1, 1,7 1,91,9,97, 0 0 0 0 0 0 0 0 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 1, ISO : 01/017, DIN 91/9.. Threads : ISO Metric g as per IS:1.. Material and Mechanical Properties : Property Class.9 as per IS : 17.. Note : Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Orders for Property class. can be accepted subject to our confirmation on the basis of item wise quantities. Price list for. available separately.. Upto 0MM Dia can be manufactured against request. 1
Unbrako Hex Head Bolts/Screws M M1 M1 M1 Metric 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1 1 0 0 0 70 7 0 90 0 1 1 10 10 1 10 10 0 0 0 00 1700 17009 170070 170071 17007 17007 17007 17007 17007 170077 17007 170079 17000 17001 1700 1700 1700 1700 1700 17007 1700 17009 170090 170091 17009 1 9 7 9 99 1,1 1,00 1, 1, 1,1 1,7 1,17 1,9,1,9,,1,0,09,9,1,1,77 0 0 0 0 0 0 0 0 17009 17009 17009 17009 170097 17009 170099 1700 1701 170 170 170 170 170 1707 170 1709 1701 170111 17011 17011 17011 17011 17011 170117 17011 170119 1701 1,0 1, 1, 1, 1,7 1,91,0,,0,07,70,799,990,19,7,0,,0, 7,00 7,,19,99 1, 1, 1, 1,071 19, 0 0 0 0 0 1 1 17011 1701 1701 1701 1701 1701 17017 1701 17019 17010 17011 1701 1701 1701 1701 1701 17017 1701 17019 17010 17011,1,9,9,7,99,,9,,71,9,1,0,7,,0,70 7,7 9,9,7 11, 1,7 1701 1701 1701 1701 1701 17017 1701 17019 1701 17011 1701 1701 1701 1701 1701 17017 1701 17019 17010 17011 1701 1701 1701 1701 1701 17017 1701 17019 170170,09,09,09,,,,,7,19,9,,0,1,9,9, 7,1, 9,7 9,99 11, 1, 1,0 1,00 19,9,70 1,9,7 0,1 1 1 1 1 1 1 1 1 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 1, ISO : 01/017, DIN 91/9.. Threads : ISO Metric g as per IS:1.. Material and Mechanical Properties : Property Class.9 as per IS : 17.. Note : Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Orders for Property class. can be accepted subject to our confirmation on the basis of item wise quantities. Price list for. available separately.. Upto 0MM Dia can be manufactured against request.
Hex Head Bolts/Screws Metric 0 0 70 7 0 90 0 1 1 10 10 1 10 10 0 0 0 00 170171 17017 17017 17017 17017 17017 170177 17017 170179 17010 17011 1701 1701 1701 1701 1701 17017 1701 17019 00 001 00 00 00 M1 M M 0 Pcs,90,191,,19 7,0 7,70 7,91,0,1,9 9,91,9 11,1 1,07 1, 1,7 1,1 1,099 17,9 19,1,7,1,,09 170190 170191 17019 17019 17019 17019 17019 170197 17019 170199 170 1701 170 170 170 170 170 1707 170 1709 170 17011 1701 1701 1701 0 Pcs,9,9,9,7 7, 7,909,19, 9,01 9,1 9,90,7 11,9 1, 1,7 1,71 1,19 17,17,0 1, 0,0 1,0,0,07 9,0 1701 1701 17017 1701 17019 170 1701 170 170 170 170 170 1707 170 1709 1700 1701 170 170 170 170 170 0 Pcs 9,0,1,9 11,7 1,11 1,9 1,00 1,9 1,0 1,17 17,90 1,19 19,11,00,,1,09 1,179,07,1 1,,1 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 1, ISO : 01/017, DIN 91/9.. Threads : ISO Metric g as per IS:1.. Material and Mechanical Properties : Property Class.9 as per IS : 17.. Note : Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Orders for Property class. can be accepted subject to our confirmation on the basis of item wise quantities. Price list for. available separately.. Upto 0MM Dia can be manufactured against request.
Unbrako Hex Head Bolts/Screws Metric M M7 M0 0 Pcs 0 Pcs 0 Pcs 0 70 7 0 90 0 1 1 10 10 1 10 170 10 190 0 0 0 00 1707 170 1709 1700 1701 170 170 170 170 170 1707 170 1709 1700 1701 00 170 00 170 170 170 170 1707 170 1,0 11,9 1,90 1,90 1,19 1,70 1,079 17,170 1,71 19,11,71 1,,7,0,1 9,17 0, 1,,0 7,00 9,099,79,,9 1709 1700 1701 170 170 170 170 170 1707 170 1709 17070 17071 1707 1707 1707 1707 1707 17077 1707 17079 1700,917,917,917,917,917,79,00 0,,09,1,19 7,71 0,1,9,9 1,9,0 77,9,0 9,1 9,09 99,1 1701 170 170 170 170 170 1707 170 1709 17090 17091 1709 1709 1709 1709 1709 17097 1709 17099 17000 17001 1700,09,09,09,09,09,09,7 7,11 0,1,1,1 7,17,1,91 9,7,91 71,9,777 9, 99,001,7 111,199 Grey highlighted items are full threaded 1. Specifications : Generally conforming to IS : 1, ISO : 01/017, DIN 91/9.. Threads : ISO Metric g as per IS:1.. Material and Mechanical Properties : Property Class.9 as per IS : 17.. Note : Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Orders for Property class. can be accepted subject to our confirmation on the basis of item wise quantities. Price list for. available separately.. Upto 0MM Dia can be manufactured against request.
Hex Head Bolts/Screws Metric M M M 0 Pcs 0 Pcs 0 Pcs 7 1700, 0 1700 7,99 170 7, 90 1700, 1701 1,719 170 90, 0 1700, 170, 1707 9,709 1 17007, 170,7 170 0,99 1 1700 9,9 170 9,90 1709 1,71 10 17009,17 170 7, 1700,01 10 170 7,090 170 77,70 1701 111,91 1 17011 70,9 1707 1,99 170 117,79 9 10 1701 7,0 170 90,07 170 1,9 9 10 1701 1,9 1709,00 170 1,9 1701,0 1700 11,1 170 11,0 7 1701,9 1701 1,7 170 10,90 7 0 1701 11,1 170 1, 9 1707 19,9 0 17017 1, 170 1, 170 7,797 0 1701 1,00 170 1,99 1709 1,9 00 17019 10, 170 19,09 7 170,7 Grey highlighted items are full threaded 1. Specifications :. Threads :. Material and Mechanical Properties :. Note :.. Generally conforming to IS : 1, ISO : 01/017, DIN 91/9. ISO Metric g as per IS:1. Property Class.9 as per IS : 17. Shaded size are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra. Orders for Property class. can be accepted subject to our confirmation on the basis of item wise quantities. Price list for. available separately. Upto 0MM Dia can be manufactured against request. Important * long delivery items-subject to extended deliveries ( to months ). Users are advised to plan their requirements in advance.
Unbrako Hex Head Bolts/Screws Inch 1/ /1 / 1/ 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1/ 1701 99 0 170 0 1701 7 / 170 9 0 170 0 170 7 / 170 0 170 7 170 77 17000 1,09 0 7/ 170 0 0 1707 170 90 17001 1,9 0 1 170 170 0 170 77 1700 1,9 0 1-1/ 170 1709 170 1700 1,7 0 1-1/ 1707 17070 71 1707 90 0 1700,00 1-/ 170 17071 0 170 1,0 0 1700,19 1709 0 1707 1709 1,191 0 1700,1-1/ 1700 1707 99 0 17090 1,0 0 17007,07-1/ 1701 7 1707 1,01 0 17091 1, 0 1700,77 -/ 170 1 1707 1,11 0 1709 1,9 0 17009,00 170 7 1707 1,17 0 1709 1,91 0 170,71-1/ 007 1,0 17077 1,1 0 1709 1,70 17011,1-1/ 00 1,0 1707 1, 0 1709 1,9 1701,79 -/ 009 1, 0 17079 1, 0 1709, 1701,9 000 1,1 0 1700 1, 0 17097, 1701,099 1/ 1709,1 1701, 1/ 17099,91 1701,7 00,1 17017,10 1/ 00, 1701, 00,97 17019 7,7-1/ 007 9, 7 170 11, 71/ 1701 1, 170 1,17 Grey highlighted items are full threaded 1. Specifications :. Threads :. Material & Mechanical Properties :.Note : : Generally conforming to ANSI B 1..1 for BSF BS : Unified Coarse, A as per ANSI B1.1. For BSF BS :. Grade as per SAE J 9 for BSF BS :. Non-shaded sizes if required in full thread will cost % extra. BSF threading will cost 1% extra Upto Inch Dia can be manufactured against request.
Hex Head Bolts/Screws Inch / / 7/ 1 0 Pcs 0 Pcs 0 Pcs 0 Pcs 1 170,9 1.1/ 170,0 1.1/ 170, 170,07 1707 1,9 1./ 170,700 170,17 170 1,9 1707,7 1707,71 1707 1,91 1709 1,97.1/ 170, 170 7,9 170 1,91 17090 1,.1/ 1709,1 1709 7,7 1709 1, 17091 1,1./ 1700,00 170,0 17070 1, 007 1,191 1701,9 1701,79 17071 1, 1709 17,7.1/ 170,7 170 9,17 1707 1, 1709 1,.1/ 170,0 170 9,91 1707 1, 1709 19,19 / 170,70 170,9 1707 1,90 1709 1,19 170,90 170 11,1 1707 1, 17097 1,19 1/ 170 7,19 170 11,1 1707 17, 1709,9 1/ 1707 7,1 1707 11,9 17077 1, 17099,9 170,7 170 1,70 1707 19,91 1700,99 1/ 1709 9,0 1709 1, 17079,90 1701,09 1700,0 1700 1, 1700, 170 9,9.1/ 1701 11,7 1701 1,9 1701,0 170 1,7 7 170 1, 170 1,9 170,90 170,9 7.1/ 170 1,1 170 17,00 170 7, 170,7 170 1,79 170 1,7 170, 170, 9 170 19, 170, 1707,9 170 1,9 170, 170 7, 11 00,9 1709 9,09 1 170, Grey highlighted items are full threaded 1. Specifications : Generally conforming to ANSI B 1..1 for BSF BS :. Threads : Unified Coarse, A as per ANSI B1.1. For BSF BS :.. Material & Mechanical Properties : Grade as per SAE J 9 for BSF BS :..Note : Non-shaded sizes if required in full thread will cost % extra. BSF threading will cost 1% extra : Upto Inch Dia can be manufactured against request. 7