TFT LED Monitor Monitor TFT LED USUR MANUAL TBK-M1911 / TBK-M1920 *Important Notice: Please read this manual carefully before use.
Contents 1. Intended used 1 2. Explanation of symbols 1 3. Safety instructions 1 4. Main accessory...3 5. Aspect instruction..3 6. Connection...5 7. Basic OSD setup.6 8. PC resolution..11 9. Specification...11 10. Trouble shooting.12-1-
1. Intended used To protect against any hazard, please follow the safety notices below when you set up, use or maintain the LCD monitors. All the safety or operation instructions should be read before this equipment is operated. This manual should be retained for future reference. The machine has high voltage, do not open the housing to avoid electrical shock Maintenance should be entrusted to professionals. Incorrect method of operation may cause electric shock or fire. To ensure your safety and the life of color LCD monitor, please read this manual carefully before use. 2. Explanation of symbols A lightning symbol in a triangle indicates a health hazard, e.g. danger of electronic shock. The exclamation mark in the triangle indicates a particular risk in handling, operating or controlling the product. 3. Safety instructions The guarantee will be void if damage is incurred resulting from non-compliance with these operation instructions. We assume no liability for any consequential damage. We do accept any liability for personal injury or damage to property caused by incorrect handling or non-observance of the safety instructions. In such cases the warranty / guarantee is voided. Please read this manual carefully before use. -2-
Manual must be kept to the needs of future. Do not use the accessories which manufacturer did not recommend. Only 12V DC power supply applicable for the unit. Don t place this equipment on uneven or unstable cart, stand, bracket or table. This equipment will fall, causing serious injury to a child or adult, and serious damage to this equipment. Please operate the equipment under the instructions on back cover. Don t overload the wall outlets and extension cords. Please use the cord carefully. Don t place heavy items on the AC cord. Don t touch the AC cord during a lightning storm, Please unplug the cord from the wall outlet if it is unused for long periods of time. Don t place the equipment near water. Don t expose the equipment to liquid, rain or moisture. Never spill liquid of any kind onto the equipment. Refer all services to quality service personnel. Don t attempt to service this equipment yourself. You are in the danger of high voltage if you remove the back cover, so please contact quality personnel. Please cut off the power from outlet before cleaning the equipment. Don t touch screen with any solid, tip-head item. Please clean the equipment with soft dry cloth, not chemical liquid cleaners or spray cleaners. Don t expose this equipment to high or low temperature or direct sunlight, which will cause this equipment overheat and damage the equipment. Don t block ventilation slots or openings and install this equipment in a place where ventilation may not be obstructed. Never place this equipment on bed, sola, rug or other similar surface, or near cloth, wall, bookcase rack, or other similar places unless proper ventilation is provided. Each switching time intervals do not less than 3 seconds. -3-
4. Acesorios 1) 1 ud alimentador 2) 1 ud cable alimentación 3) 1 ud soporte 4) 1 ud cable VGA 5) 1 ud mando remoto CR2025 5. Aspect instruction (1) Front panel 1. REM: Remote control receiver 2. LED: LED light 3. POWER: Power 4. MENU: Enter OSD Menu 5. +: Up 6. - : Down 7. AUTO: Image mode selection Notice: If has video signal, the LED light of front panel is on green; if no signal, it will turn red. -4-
(2) Back panel HDMI:High Definition Multimedia Interface VGA: Connect computer or other image signal output terminal AV1 INPUT/ AV2 INPUT: Video 1 input, video 2 input VIDEO OUT: Video output AUDIO INPUT: Audio input AUDIO OUTPUT: Audio output (3) Remote control Special Note POWER:Power on/off MUTE Mute:Press to mute the sound. Press again to un-mute. PICTURE: Image mode selection INPUT: Input mode selection, HDMI / VGA / AV1 / AV2 UP: Menu selection DOWN: Menu selection RIGHT:Volume selection and menu adjustment and Enter. LEFT: Volume selection and menu adjustment. MENU:Press to bring up the main menu to the screenand exit the current menu. VGA:VGA mode selection HDMI:HDMI mode selection AV:AV mode selection, AV1 / AV2 RIGHTKey also has the function of entering a menu, equivalent of ENTER key. -5-
6. Connection 1) P C connection Connect LCD monitor to the PC, you can enjoy a more realistic picture and clear sound. Make sure the power of LCD monitor and PC have been shut down. Connect the VGA output of the PC to the VGA jack on the set. Connect the PC audio output to audio input jack on the set. Connect the power cord. Power on the LCD monitor and then PC. Select the VGA mode via the remote controller. The LCD monitor can support the resolution shows on sheet 1, other resolution can not support. 1280 1024 is suggested. 2) AV INPUT and AV OUTPUT connection Connect the BNC in cable output of the DVR to the AV input on the set. Connect the BNC out cable input of the other monitor to the VIDEO OUTPUT on the set. Select AV1 or AV2 input source with pressing the AV button on the remote controller. 3) HDMI connection HDMI (High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports uncompressed standard. One jacksupports both video and audio information. Make sure the power of LCD monitor and DVR have been shut down. Connect HDMI output of the DVR to the HDMI input jack on the set. Connect the power cord. Power on the LCD monitor and then DVR Select the HDMI mode via the remote controller 7. Basic OSD setup Press the MENU button into main menu. Press UP, DOWM, LEFT, RIGHT button select OSD menu. Press RIGHT button to enter, please refer the following sheet. Following OSD menu are the ones which have video signal input. -6-
8. PC resolution Panel size Resolution Horizontal frequency KHz Vertical frequency Hz Pixel clock MHz Sync direction 17 19 1280 x 1024 / 60Hz 60.680 64.030 54.000 +/+ 9. Specification Item TBK-M1911 TBK-M1920 Tamaño de panel 19 (4:3) Tipo panel Área de visualización activa Brillo TFT LED 367 301mm 250cd/ m2 Ratio de contraste 1000:1 Tiempo de respuesta 5ms Colores 16.7M Resolución 1280 1024 Ángulo de vision Estándar Idioma OSD Alimentación Consumo Temperatura de Operación 170 /160 (H/V) PAL Inglés DC 12V 5A 39W 0-60 C Humedad de Operación 10%-85% Temperatura de Almacenamiento Humedad de almacenamiento -20-60 c 5%-90% TFT LED Marco metálico -7-
10. Trouble shooting In the event that you experience with your monitor, check the following items before contacting dealer whom the monitor is purchased. Problem Display screen doesn t work Trouble shooting tips Check the plug of AC adapter has been connected properlyto wall outlet Check that the power is ON Check that the equipment is ON No image on display Check the signal cord has been connected and signal cordis OK Check the input video mode iscorrect Check that the power switch of input signal is ON Abnormal image Checkmonitor has been connected to outside equipmentproperly Check outside equipment is OK Refer to this manual to check other parts or restore out-factory setting. Image become darker Setting can not be adjusted Strip on image or color and sound isabnormal The screen illumination tubereachedlifetime Check the PICTURE MODE selection is USER, settingcan be adjusted only on USER mode. Keepthemonitorawayfromdisturbancesources. -8-