Index Solid
About Index Solid enables customizable graphic, textural patterning with a single repeated element of 2'-0" x 6" (61 x 15.2 cm) tiles. 63 colors options allow bold to subtle compositions using the standard tile. Tiles are made with high quality 100% Wool Design Felt, natural cork composite backing, and low VOC adhesive. Index Solid can be specified with up to four colors per wall and install easily with heavy-duty wallcovering adhesive. info@filzfelt.com filzfelt.com 1
About Wall Surface Index Solid Pattern Element 1 Exploded Axonometric Not to scale info@filzfelt.com filzfelt.com 2
About 2'-0" (61 cm) 6" (15.3 cm) 2 Elevation Scale: Not to scale 6 mm (1/4 in) Cork Composite Backing 3mm Wool Design Felt 3mm Wool Design Felt 3 Plan Detail Not to scale 6 mm (1/4 in) End-of-Run Trim applied following tile installation Cork Composite Backing 3mm Wool Design Felt 1" (2.54 cm) 4 Plan Detail at Trim Not to scale info@filzfelt.com filzfelt.com 3
Suggested 2-Color Configurations 2-Color Pattern 1 Code: FF-SU-INDS-001 2-Color Pattern 2 Code: FF-SU-INDS-002 info@filzfelt.com filzfelt.com 4
Suggested 3-Color Configurations 3-Color Pattern 1 Code: FF-SU-INDS-003 3-Color Pattern 2 Code: FF-SU-INDS-004 info@filzfelt.com filzfelt.com 5
Suggested 4-Color Configurations 4-Color Pattern 1 Code: FF-SU-INDS-005 4-Color Pattern 2 Code: FF-SU-INDS-006 info@filzfelt.com filzfelt.com 6
Specifications Designer Name Content Tile Thickness Tile Size Color Options Color Specification Trim Options Durability Maintenance Lead Time Environmental Installation Custom Variation Submaterial Index Solid 100% Wool Design Felt Face + Cork Composite Backing 1/4 in (6 mm) 2'-0" x 6" (61 x 15.2 cm) 1-Color, 2-Color, 3-Color, or 4-Color per wall For 1-Color, specify one color in 3mm For 2-Color, specify two colors in 3mm For 3-Color, specify three colors in 3mm For 4-Color, specify four colors in 3mm End-of-Run Trim + Outside Corner Trim Contract or residential Vacuum occasionally to remove general air-borne debris. Should soiling occur, spot clean with mild soap and lukewarm water. Avoid aggressive rubbing as this can continue the felting process and change the surface appearance of the felt. Refer to 100% Wool Design Felt Maintenance + Cleaning for detailed care instructions. Made to order and certain lead times will apply 100% Wool Design Felt is 100% biodegradable and Cork Composite Backing is 93% pre-consumer recycled content Contains no formaldehyde, low VOC, no chemical irritants, free of harmful substances Cork composite backing is GREENGUARD-certified Contributes to LEED v4 Each order includes equal numbers tiles per color. Tiles attach to a wall surface using a heavy-duty wallcovering adhesive. Tiles may be trimmed to size with a utility knife. 5-Color or more per wall is available and must be quoted Wool felt is a natural material and color variation and inclusions of natural fiber on the surface are evidence of the 100% natural origin of the material. Product color is only indicative, as it is not possible to assure consistency of color in a natural product due to the natural color of raw wool and absorption of dyes. Color matching cannot be guaranteed on shipments and variation will be more pronounced beyond the normal commercial range. Acoustics ASTM C 423: NRC 0.20, SAA 0.21 Colorfastness to Light Colorfastness to Crocking Environmental Flammability Class 4 5 (40 hours) Class 3 4 (wet), Class 4 5 (dry) Oeko-Tex Standard 100 Certified Product Class II (100% Wool Design Felt) FSC (Forest Stewardship Council ) Certified (cork composite backing) Test reports available upon request info@filzfelt.com filzfelt.com 7
Standard 3mm Colors 100 102 105 110 116 124 125 131 136 150 151 156 160 170 173 175 179 180 200 201 203 209 220 231 242 250 255 265 269 272 274 282 284 286 300 308 312 319 331 343 377 378 384 385 408 415 423 425 426 437 448 467 476 497 503 534 540 548 613 626 686 713 732 info@filzfelt.com filzfelt.com 8
Sound Absorption Results Frequency (Hz) Sound Absorption Coefficient (Sabins / Unit) 100 0.01 1 0.9 0.8 125-0.03 160-0.01 200 0.03 250 0.03 315 0.03 400 0.04 500 0.06 630 0.09 800 0.15 1000 0.24 1250 0.31 1600 0.43 Sound Absorption Coefficient (Sabins / Unit) 0.7 0.6 0.5 0.4 0.3 0.2 2000 0.53 2500 0.60 0.1 3150 0.68 4000 0.73 5000 0.81 0 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000 SAA = 0.21 NRC = 0.20 Frequency (Hz) Test Report Submaterial Collection For the Submaterial Collection, the test report quotes the frequency dependent sound absorption data as well as the single number ratings. Data taken from Test Report RAL TM -A16-042 conducted by Riverbank Acoustical Laboratories. Complete test results are available upon request. info@filzfelt.com filzfelt.com 9 07/18