Idea Catalogue Ver. 3.2
Idea Catalogue 2 Introduction This Idea Catalogue is designed to give Bang & Olufsen retailers inspiration and ideas to what is possible when it comes to integrating third party products and create exiting solutions for our customers. It serves as illustration only, and we recommend that you attend integration training courses regularly to achieve knowledge about the solutions shown. You can find and book courses in BEOCADeMY. Our contact to retailers, installers and system integrator worldwide ensure we have and are able to share the latest knowledge or best practice with you globally. You can find additional information on BeoWise under the 3rd party products section and if you have questions or need more information, you can contact the Project Sales Support team, check out the suggested website or find instructional videos in the dedicated YouTube section. E-mail: beoliving@bang-olufsen.dk Website: www.beointegration.com YouTube: Beointegration.com
Idea Catalogue 3 Contents Integration with third party products and special set-ups: BeoLink BeoLink SmartHome... 5 Controlling the Home Automation from the TV screen... 6 Add door camera functionality to the customers BeoLink SmartHome system... 7 Control Contact Closure, RS232 or IR devices over WiFi or LAN via BeoLink Gateway... 8 Simple light control solution (Philips Hue)... 9 BeoLink Control Panel (ipad Frames)... 10 BeoGram record players in BeoLink Multiroom... 11 Continue to use a Master Link system without having a Master Link Master in the system... 12 BeoSound 5 / BeoMaster 5 as source center... 41 Video Bang & Olufsen Video Distribution (Atlona)... 4 Chromecast content from Mobile Devices to TV screen... 19 Playing CD s on a Bang & Olufsen TV (OPPO BDP-103/105D)... 21 Connecting wireless Bang & Olufsen speakers to a 3rd party TV... 22 Using a 3rd party TV with BeoSystem 4... 23 Android based UHD player for in-store video... 24 Netflix 4K on the BeoVision Avant-55/75/85 (Sony FMP-X5/X10)... 25 Android TV & 4K content on the BeoVision Avant-55/75/85 (Nvidia SHIELD)... 26 Placing sources away from the TV in a single room (Atlona Switcher) Distance > 10m... 28 Placing sources away from the TV in a single room (Atlona Switcher) Distance < 10m... 29 over CAT 7 Extender (long cable solution)... 30 3 rd party control systems... 31 Mirror TV with BeoSystem 4 (Aquavision)... 32 3D Blu-Ray disc player for Bang & Olufsen TV s (OPPO BDP-103/105D)... 35 Use Apps on your TV screen (Apple TV - 4 th generation)... 37 Kaleidescape (high-end A/V distribution)... 43 Audio Manually control the power on/off on Bang & Olufsen speakers from other systems... 15 Solution for ripping CD s to a NAS drive (RipNAS Solid E)... 18 High Definition Audio Player for BeoLab 90 (Auralic Aries)... 27 Apple AirPlay... 36 Belkin Bluetooth music receiver... 38 Apple AirPort Express as Wi-Fi music receiver (AirPlay)... 39 DLNA (Digital Living Network Alliance)...40 BeoSound 5 A.AUX input... 42 Installation & Infrastructure Making recessed installation behind TV s... 13 Cable Management... 14 Bang & Olufsen s recommendation for a small network infrastructures... 16 Bang & Olufsen s recommendation for a medium and large network infrastructures... 17 PowerLine infrastructure (Devolo)... 20 Alternative stand and bracket solutions (STB Brackets)... 33 Motorized lifts for TV s / Projectors (Future Automation)...34
Idea Catalogue 4 Bang & Olufsen Video Distribution (Atlona) In a multi-screen installation, you get Full-HD/4K distribution, access and control of centally placed media sources from your Bang & Olufsen remote control. CAT7 1...16 Inputs PUC cable 1...16 Outputs IR Blaster IR Blaster IR Blaster CAT7 UHD/4K models available: Atlona 4x4 UHD Matrix AT-UHD-PRO3-44M. Bang & Olufsen part number 8780342 (EU) Up to 100 metres (CAT7) CAT7 PUC cable Atlona 6x6 UHD Matrix AT-UHD-PRO3-66M. Bang & Olufsen part number 8780343 (EU) Atlona 8x8 UHD Matrix AT-UHD-PRO3-88M. Bang & Olufsen part number 8780344 (EU) PUC cable Atlona 16x16 UHD Matrix AT-UHD-PRO3-1616M. Bang & Olufsen part number 8780345 (EU) CAT7 PUC cable Description Each TV can receive all the sources. With a UHD/4K matrix up to 100m on CAT 7 distribution (dependent on selected output on matrix and receiver box used.) Full IR and PUC control for every source from every TV. This solution works using the Bang & Olufsen BeoRemote One, Beo4 as well as the BeoRemote and BeoLink app. Feature Activation key needed for BeoVision 7, BeoVision 10, BeoSystem 3 and BeoPlay V1 (Free of charge) PUC tables in each TV for control Takes up 1x and 1x PUC for each TV For perfect control, use BeoRemote One or BeoLink app Accessories needed: Atlona Matrix (see available models above) Receiver box for each TV PUC cable for connection to B&O TV cables from receiver box to TV and from source to matrix CAT7 installation cable (500m reel 6250027) Ordering from Europe, Africa and Russia via Bang & Olufsen (Retail System/DAILY OPERATION/Ordering 3rd party products /How to order Atlona products) For ordering outside EU, see: www.atlona.com/bang-and-olufsen/ For more information see www.atlona.com/bang-and-olufsen/
Idea Catalogue 5 BeoLink SmartHome This solution offers remote access and control of both your A/V and Home Automation systems, utilizing your local Wi-Fi network. Secure remote access to the system is also possible when using the Khimo online service*). HOME AUTOMATION Internet Router/ Switch Ethernet cable BeoLink Gateway Master Link System BLGW Set-up Areas & Zones(rooms), systems, ressources and sources to get started with basic operation. Capture the products on the different systems that should be part of the BeoLink system and give them names. Program Macros for more detailed operation Network Link TVs Enable forwarding of Light/Control commands to BLGW here: SERVICE MENU -> SETTINGS -> FORWARD LIGHT/CTRL -> Select Product (MLGW/BLGW) Master Link TVs In the Customer Service Menu -> ADJUSTMENTS set STAT TO MLGW OFF CMDS TO MLGW ON Accessories needed: LAN network components Suppported Home Automation system(s)**) Apple ipod Touch, iphone or ipad BeoLink App***) A USB-> RS232 converter may be needed for some systems. Use same as used with Servicetool. *)Khimo is free of charge the first month, but is a paid service after the trial period. See www.khimo.com for more information. **)Find the updated list of supported systems/partners on www.beointegration.com ***)Available in Apple App Store See the BeoLink Gateway Installation guide on BeoWise and www.beointegration.com for for more information.
Idea Catalogue 6 Controlling the Home Automation from the TV screen One of the new features of the BeoLink Gateway is the option to access and control your home automation ressources directly from the TV screen. Description With this new feature it is possible to get an overview of all the home automation ressources added to the BeoLink Gateway configuration. Using just a few clicks on the BeoRemote One you can see if anyone has forgotten to switch of the lights somewhere in the house or even see who is outside the door getting the image from an IP camera directly on the TV screen. Accessories: BeoLink Gateway Home Automation ressources supported by BeoLink Gateway See list of supported systems in the BeoLink Gateway installation guide. The menu just overlays whatever content that is shown on the TV and it event works on 4K content.
Idea Catalogue 7 Add door camera functionality to the customers BeoLink SmartHome system When someone rings the doorbell while the customer is watching TV the door camera automatically overlays on whatever is being watched on the TV. Operate the camera and open the door all using the Beo4 / BeoRemote One. Mobotix T25 IP Door Station MxDisplay+ LAN PoE LAN PoE Internet router/ Switch BeoVision TV (NetworkLink) LAN Door Lock Interface with exit button, emergency exit etc. LAN BeoLink Gateway Description: The Mobotix T25 is a professional IP Video Door Station designed for outdoor use and is designed with high flexibility in mind, so that it can fit into any installation. We have made an integration possible that allows the picture from the camera to be shown automatically on the TV screen when someone rings the doorbell and also control the door lock that is connected to the door station via the controls offered by BeoLink SmartHome. See the BeoLink SmartHome section in this catalogue for more information. Contact your nearest Mobotix distributor for more information on the Mobotix solution and contact Project Sales Support for more information regarding the integration with BeoLink SmartHome. Accessories needed: Mobotix T25 IP Video Door Station MxDisplay+ Indoor Display Unit Door Lock Interface (Mx-DoorMaster or MX-OPT-IO1) PoE Switch or PoE Injectors BeoLink Gateway Limitations: Not possible to have audio on the TV & BeoLink App. Audio can be done via the MxDisplay+ In case of power failures it is recommended to use a Mx-DoorMaster that have a backup power source
Idea Catalogue 8 Control Contact Closure, RS232 or IR devices over WiFi or LAN via BeoLink Gateway These small devices from Global Cache are a great way to solve a problem when there is no way to pull a cable or there is no home automation system present. All you need is a standard cabled Ethernet connection or WiFi coverage in order to integrate a device controlled by either RS232, IR or Contact Closure. Internet router/ Switch BeoLink Gateway LAN LAN LAN IP2SL WF2IR IP2CC RS232 IR Contact Closure TV Lift Climate Control Curtain Rail Description: Bang & Olufsen has entered in a strategic partnership with Global Cache. The partnership ensures seamless and simple integration of Global Caché connectivity hardware and Bang & Olufsen s new IP based BeoLink Gateway, part of the Bang & Olufsen BeoLink SmartHome. Used together, any IR, serial, or relay device can be network-enabled and automated using IFTTT (If This Then That) commands and become part of the IoT (Intenet of Things) infrastructure. The Global Caché itach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Based on open systems and industry standards, the ultra-compact device fits almost anywhere (even the palm of your hand), and includes a choice of wireless (WiFi) or wired (TCP/IP) connectivity to infrared (IR), serial (RS232), and contact closure (relay) equipment. Accessories needed: Each type of itach (Serial, IR, CC) comes in three versions LAN (i.e. IP2CC) LAN (PoE) (i.e. IP2CC-P) WiFi (i.e. WF2CC) See http://www.globalcache.com/products/itach/ for more details. Limitations: The WiFi devices only support WiFi 802.11b standard on 2.4 GHz band using channels 1-11 The current rating for the relays in the IP2CC is very low so an external relay should be used for mains power and high current applications.
Idea Catalogue 9 Simple light control solution (Philips Hue) Philips Hue lighting is a great way to make a simple light control solution and get started selling the BeoLink Gateway and all its features to a customer. It is cheap to get started with and is very easy to install as the bulbs communicate wirelessly via ZigBee to the bridge. BeoVision TV Philips Hue Starter Kit BeoLink App Bang & Olufsen Remote BeoLink Gateway Internet Router/ Switch Description The Philips Hue system can now be purchased in many countries around the world and they have quite an extensive product range with many types of lamps and sockets for different purposes. You can connect up to 50 Hue light bulbs to a single system all wirelessly, while using as much as 80% less energy than traditional bulbs. Just setup the Hue system with the Hue App and name the lamps. Then it is easy to import them into the BeoLink Gateway. It takes approx. 10 minutes to get the lamps programmed for basic control, once the process of adding the lamps in the BLGW has been started. The lamps can be controlled either via the Home Control menu on the TV screen, the BeoLink App or via the Bang & Olufsen remote if some macros are made to adjust the lamps or trigger some scenes. Accessories BeoLink Gateway Philips Hue Starter Kit Philips Hue App See the installation guide for Philips Hue on BeoWise or read the internal help file in the BLGW for more information on setting it up and using the system.
Idea Catalogue 10 BeoLink Control Panel (ipad Frames) This aluminum mount keeps your ipad completely secure while easily displaying its functions. The slim design presents your device in a stylish manner and is ideal for operating home automation systems in residential and commercial settings. Available in both an InWall and OnWall mount, turn your ipad Air or ipad Mini into a conveniently mounted touch panel. that allows for easy connectivity to compatible control systems via Wi-Fi for operating home integration systems. Accessories needed: Landscape Mode: Item 28002 - ipad holder - Air on-wall aluminium Item 28004 - ipad holder - Air in-wall aluminium Item 28003 - ipad holder - Mini on-wall aluminium Item 28005 - ipad holder - Mini in-wall aluminium Item 28064 - ipad holder - Air on-wall Black Item 28062 - ipad holder - Air in-wall Black Item 28065 - ipad holder - Mini on-wall Black Item 28063 - ipad holder - Mini in-wall Black Item 28037 - ipad holder - Pro on-wall aluminium Item 28038 - ipad holder - Pro in-wall aluminium Portrait Mode: Item 300030 - ipad holder - Mini in-wall aluminum NOTE: Order the parts above as store inventory
Idea Catalogue 11 BeoGram record players in BeoLink Multiroom Many customers still have an old BeoGram record player around the house somewhere and as vinyls are getting more and more popular many new customers are also requesting a way to distribute their vinyls in a multiroom system. Below are two examples of how you can integrate an old BeoGram recordplayer with BeoLink Multiroom. Solution 1: Phono / RCA Phono / RCA BeoGram Record Player RIAA Amplifier BeoSound Moment / Any multiroom audio product with Line-In Solution 2: Master Link BeoLink Converter NL/ML AUDIO AUX LINK BeoLink Converter 1611 BeoMaster 6500 / BeoMaster 7000 Power Link Description: Solution 1: Feed the record player into any Bang & Olufsen audio system with an AUX input / Line-in and distribute it from there to any room in the house either wired or wireless. Solution 2: Upgrade your old BeoMaster to become a nearly full-blown member of the BeoLink Multiroom family. It will show up in the BeoMusic App (BeoLink Converter NL/ML) as a product and you can select the sources available on it and control the volume. That must be one of the first (and coolest) app controlled record players in the world. Setup BeoLink Converter NL/ML as Video Master and select Product Controlled by Apps as BeoLink Converter with speakers. Give it a Frindly name like BeoMaster 6500 and setup/rename the sources shown in BeoMusic App under Experience mapped to NL. Accessories needed: Solution 1: Record Player (B&O or non-b&o) RIAA Amplifier Phono / RCA cables Solution 2: BeoMaster 6500 / BeoMaster 7000 Converter 1611 (obsolete, but can be found as second life) BeoLink Converter NL/ML Master Link & Audio Aux Link cables Limitations: Solution 1: Not possible to control record player Solution 2: Local operation of BeoMaster does not initiate playback on BeoLink Converter NL/ML. Must be started from IR or BeoMusic App. Please note that this solution is not officially supported.
Idea Catalogue 12 Continue to use a Master Link system without having a Master Link Master in the system If a customer have a number of Link rooms with e.g. BeoLink Active and Passive, and update the Audio and Video master to new Network Link products, it is necessary to install a ML Power box. BeoLink Converter NL/ML Socket Panel IR LINE IN USB POWERLINK RJ45 NETWORK POWER ML MASTERLINK ML Power Box Connect to Master Link either via Master Link connector or RJ45 via ML Power Box TO ML Description: The ML Power Box will make it possible to use BeoLink Converter NL/ML on Master Link without any other master, i.e. up to 15 units of BeoLab 2000, BeoLab 3500, BeoLink Active, BeoLink Passive, BeoLink Video and BeoVision MX 4002. The BeoLink Converter NL/ML can act as a ML Key Master on the Master Link system from firmware release 1.4.0. The BeoLink Converter NL/ML does not include the power functionality to drive the Master Link data bus. This power will have to come from the ML Power Box. The ML Power Box has two RJ45 sockets, so it is possible to link to other ML products via CAT7 cables. Accessories needed: ML Power Box Part no. 8052447 USB A USB B mini cable. Part no. 6270848 The BeoLink Converter NL/ML will handle the Audio/Video Master function on the Master Link including timer for BeoLab 3500. The ML Power Box will take the 5V DC from the USB port on the BeoLink Converter NL/ML and input the ML power via the RJ45 ML connector on the BeoLink Converter NL/ML.
Idea Catalogue 13 Making recessed installation behind TV s A way to make discrete installations behind TV s can be to use a Sync-box. It allows installations behind a flat on wall TV. Description: Power outlets are available for different European standards. Other cable outlet can be e.g. a brush module where cables come direct out of wall or Keystone moduls are available so Bang & Olufsen CAT 7 connectors and F-connectors can be clipped in. Purchase: For more information and where to purchase, visit: http://www.sync-box.com/ Similar solutions available for US standard from e.g. https://www.powerbridgesolution.com/ Accessories needed: Bang & Olufsen part no for connectors that fit into Sync box keystone modules CAT 7 connector (straight), 7221710 CAT 7 connector (angeled), 7221711 F-Connector 7221628
Idea Catalogue Cable Management A successful sale and a satisfied customer is depending on making the details correct. One important thing is to ensure a nice looking installation. To help making perfect installations Bang & Olufsen can deliver a series of cable managers. The cable managers are self-wrapping and can be wrapped around the cables after installation. It is same type as used for cable management on the BeoVision Avant Floor Stand The cable managers are available in three different colors. and 3 different sizes. Description: It is delivered in a box with 30m (one pcs = 30m) Part number for ordering is listed below. Cable manager, 10mm Cable manager, 10mm Cable manager, 10mm Cable manager, 19mm Cable manager, 19mm Cable manager, 19mm Cable manager, 25mm Cable manager, 25mm Cable manager, 25mm Please beware that the white is semi transparent, we therefore recommend to use it with white cables. Black Pearl Grey White transparent Black Pearl Grey White transparent Pearl Grey White transparent Black 3390736 3390737 3390738 3390739 3390741 3390742 3390743 3390744 3390745 14
Idea Catalogue 15 Manually control the power on/off on Bang & Olufsen speakers from other systems In many cases it is requested to have precise control of when the speakers turn on and off instead of relying on the Line-In sense functionality built into many of the speakers. Also some of the speakers like BeoLab 2 doesn t have line-in sensing. 3 rd Party System ZONE 1 12V TRIGGER OUT OUTPUT 5V - 12V DC Mono Mini-Jack Stereo RCA cable or gender changer RJ45 PowerLink RJ45 PowerLink DIN Female PL DIN Male PL STEREO RCA + POWER -> DIN Female PowerLink (6271030) Description: By means of this 8 pin DIN to stereo female RCA/Phono/cinch connector and a 5V-12V DC 3.5 mm mini-jack connector, it is possible to connect Bang & Olufsen active speakers to non-bang & Olufsen stereo equipment via Line-in. Sometimes when other audio distribution equipment than Bang & Olufsen is used for multiroom distribution or a control system is used, we often get requests for controlling the power on/off from a trigger signal. This cable above makes it easy to connect the speakers to third part equipment. Accessories needed: Stereo RCA + power -> DIN Female PowerLink (6271030) Stereo RCA cable or gender changer Mono mini-jack cable DIN Male -> RJ45 PowerLink cable (If newer speaker) DIN Male -> DIN Male Power Link cable (if older speaker) Limitations: Doesn t work with BeoLab 5 To reduce possible humming, we recommend removing the 5V when connecting and disconnecting equipment.
Idea Catalogue 16 Bang & Olufsen s recommendation for a small network infrastructures For smaller set-up s our recommendation is to use a Linksys Router and where extra wired ports are needed, a Cisco Switch. The parts have been tested together with the Bang & Olufsen and B&O PLAY products and can be ordered from Bang & Olufsen in Europe. When setting up Bang & Olufsen or B&O PLAY products we recommend to make a separate network to support the products. You can find more information on how to set-up in the BeoLink Manual. The manual can be found under Link section in BeoWise. Cisco SLM 2008T/SG 200-08 Linksys EA6900 Accessories needed: Linksys EA6900 Router Part no. 8780066 (EU) Part no. 8780065 (UK) Cisco 8 port switch (SLM 2008T/SG 200-08) Part no. 8780018 (EU) Part no. 8780019 (UK) Outside Europe, please source the products locally As a supplement we recommend to use Devolo Powerline components (see section on Devolo products)
Idea Catalogue 17 Bang & Olufsen s recommendation for a medium and large network infrastructures For medium/large systems (e.g. BeoLink Multiroom or BeoLink SmartHome) we recommend either Pakedge or Cisco Meraki. The two systems are performing on the same level and within the same price range. When setting up Bang & Olufsen or B&O PLAY products we recommend to make a separate network to support the products. A Pakedge system could e.g. consist of: Pakedge RE-2 (Router) Pakedge SX-24P (Switch) Pakedge WK-1 (AP) (two or more units depending on the environment) Pakedge NK-1 (Network Controller) A Cisco Meraki system could e.g. consist of: Z1 Cloud managed Teleworker Gateway (router) MR 220-24P Cloud Managed 24port GigE Switch MR 32 Cloud Managed Access Point (two or more units depending on the environment) Description: Both systems above can both be monitored and configured via the Cloud so that basic troubleshooting can be done from your workshop without having to visit the customer. Purchase: Bang & Olufsen are not selling the products but recommend the products for allowing us to give best possible support. Please source the products locally. Bang & Olufsen recommends that you attend the training courses provided by Pakedge Devices and Software and Cisco Meraki to gain in depth knowledge on how to install, configure and maintain the devices. Please note that a yearly license fee apply to some products.
Idea Catalogue 18 Solution for ripping CD s to a NAS drive (RipNAS Solid E) When needing a solution for ripping a customers CD to a NAS drive we have found the below product to perform well. With fanless design the RipNAS is more reliable and noiseless. It has a very small form factor and a very low power consumption. BeoSound 5 / BeoSound 5 Encore RipNAS Solid E BeoSound Moment Internet Router/ Switch BeoPlay A9 Description If you need to rip many CDs, then the RipNAS Solid E is a good choice. It is delivered with a 1 TB HDD preinstalled. Storage can be expanded or backed up using USB HDD connected to the RipNAS. Metadata is received from 5 different online databases. For more details and where to buy please see: http://www.hfx.at/ NOTE: In some countries it might be illegal to RIP CD s even for personal use, i.e. United Kingdom (July 2015)
Idea Catalogue 19 Chromecast content from Mobile Devices to TV screen With Chromecast it is possible to cast a wide variety of content from ios and Android devices to the televison screen. It is simply a dongle connected to the TV s inputs and it is powered by a USB connection. Optional Accessory: extension cable 1m Optional Accessory: Cabled LAN adaptor *) Description The Mobile device acts as the controller of the casting, but the actual streaming is done by the Chromecast device directly from the internet which conservers the battery of the mobile device. Many Apps has now built-in support for Chromecast and the list keeps growing. Accessories Chromecast extension cable for getting better WiFi signal (Optional) Cabled LAN adaptor for faster connection (Optional) *) *) Check availability in your country. Only available in US (as of July 2015)
Idea Catalogue 20 PowerLine infrastructure (Devolo) Bang & Olufsen has chosen to offer Powerline products from Devolo as Devolo is the technology leader within Powerline technology. Below please find a short description of the product and usage. Cable Replacement Cable Replacement with Wireless Access Point Description Powerline is a technology that allows a data signal to be transmitted on the power cables (120/230V) that already are installed in all private homes. It can be used as an alternative to Wi-Fi in installations where it is not possible to use CAT7 cables. In homes with e.g. concrete walls, floor or ceiling where Wi-Fi can be problematic. In many cases Powerline has been seen as more stable than a Wi-Fi connection, however like with Wi-Fi there will be situations where Powerline may also have problems. It can also be used as an easy way to enhance Wi-Fi coverage in a home. For more information see www.devolo.com or BeoWise > 3rd party products > Active Network Components > devolo Accessories dlan 650 tripple+ dlan 500 duo dlan 500 AV Wireless+ dlan 500 WiFi (Ethernet cable replacement, 3x LAN) (Ethernet cable replacement, 2x LAN) (Wireless AP via Powerline, 3x LAN) (Wireless AP via Powerline, 1x LAN) Devolo products can be ordered from Bang & Olufsen in Europe only. Outside Europe we refer to source similar products locally. dlan 650 tripple+, Starter Kit EU 8780101 / UK 8780102 dlan 500 duo, Starter Kit EU 8780052 / UK 8780053 dlan 500 AV Wireless+, Starter Kit EU 8780056 / UK 8780057 dlan 500 WiFi, Starter Kit EU 8780058 / UK 8780059 dlan 500 WiFi, Single Unit EU 8780060 / UK 8780061
Idea Catalogue 21 Playing CD s on a Bang & Olufsen TV (OPPO BDP-103/105D) If not possible to use a Bang & Olufsen CD player, the next best thing is to utilize an Oppo player as a CD player connected to a Bang & Olufsen Television. OPPO BDP-103 player PUC IR cable cable Compatible with all Bang & Olufsen products with an input connector) Description Because it can be controlled by PUC it is possible to change tracks in a multiroom setup. If the TV is on while playing CD it will automatically get the coverart and metadata from Gracenote and show it on the screen. Order special B&O version without OPPO startup and pause logo. EU version:bdp-103eubo www.oppodigital.co.uk mail to: harriet@oppodigital.co.uk US/ROW version: BDP-103USBO www.oppodigital.com mail to: kevin@oppodigital.com Accessories: IR mini jack pn 6271086 (2.5 m), 6271097 (10m) IR mini jack/rj45 part no 6271214 (7.5 m) NOTE: If OPPO Blu-ray is connected to an Atlona matrix, a special PUC cable is needed. Please see service tip on BeoWise. OPPO EU mains cord UK and standard EU mains cords will be delivered along with the product. For Denmark, Switzerland and Italy, a separate mains cord must be purchased for proper installation with earth. Denmark (no. 6100036) Switzerland (no. 6100426) Italy (no. 6100429)
Idea Catalogue 22 Connecting wireless Bang & Olufsen speakers to a 3rd party TV RCV3000 makes it possible to connect a Samsung, LG or Sony TV to the BeoLab Transmitter 1 while still using the TV s own remote to control the volume level. Description The TV can be connected to the BeoLab Transmitter 1 via TOSLINK or fixed line-out. RCV 3000 key features Is connected directly to the BeoLab Transmitter 1 via the included USB cable Requires no batteries to operate as the power is provided directly from the USB interface Captures IR signals from the latest generation of Samsung, LG and Sony remote controls** Passes on the following volume commands to BeoLab Transmitter 1: Volume up / volume down /mute / de-mute Specifications and prices Dimensions: 50 x 50 x 19 mm Cable length: 1.5 meter Availability: Now B&O Part no.: 6271259 RCP: Check ROS * Requires SW v1.1 in BeoLab Transmitter 1 ** Check BeoWise for further information on compatibility
Idea Catalogue 23 Using a 3rd party TV with BeoSystem 4 When customers are demanding a TV smaller than 40 inches or bigger than 85 inches it may be required to integrate with a 3rd party television. IR Blaster cable IR cable CAT7 (max. 100m) Power Link Power Link Settings: Make sure that the TV supports Full-HD resolution See the BeoLink Handbook for connection/wiring details regarding the IR eye and IR Blaster Set it up as a monitor and download the IR codes matching the TV manufacturer to BeoSystem 4. If none of the existing codes are working, they can be made by you using PUCtool3 or alternatively send the remote to your local PUC representative to learn the IR codes.. Set remaining BeoSystem 4 settings up as you would any other normal system. The external speakers should be connected to BeoSystem 4 s Power Link outputs. This way they can be used for both BeoLink Multiroom and for TV viewing. Accessories needed: 3rd party monitor* IR blaster cable 6271234 IR eye 8087030 CAT7 Product Cable *)Purchase locally Limitations: Not possible to get the sound from the Built-in apps on the TV i.e. YouTube to the Bang & Olufsen speakers connected All sources has to be connected to BeoSystem 4 in order to get sound from them The TV s own speakers cannot be used for audio. Speakers connected to BeoSystem 4 has to be used.
Idea Catalogue 24 Android based UHD player for in-store video Directly out of the box you have a video player that supports UHD/4K. The box runs on Android 4.4.2 (aka KitKat). It has built-in IR sensor and the remote control is very basic. PUC codes have been made and is available to download from BeoPortal. cable PUC IR cable Description MX3 Android 4.4 Quad Core 2G/8G XBMC 4k TV Box Features: - 2.0 Please note that Netflix with 4K will never be available on this, because it come directly rooted (not locked) and Netflix doesn t allow 4K on rooted device. Available from Amazon. In order to get the correct power adaptor, please order it locally. - H.265 and HEVC PUC filename: Android TV BOX MX3 - Ethernet LAN 1 Gigabit - Quad core Set output manually: Settings/Display/ Output mode settings/4k2-30hz - Built in IR receiver
Idea Catalogue 25 Netflix 4K on the BeoVision Avant-55/75/85 (Sony FMP-X5/X10) Since BeoVision Avant does not have the built-in capabilities to decode H.265 HEVC codec that is required to for viewing Netflix 4K, we have come up with solution that enables the customer to watch Netflix 4K content on their BeoVision Avant. BeoVision Avant-55/75/85 PUC cable (IR) Sony FMP-X5 / Sony FMP-X10 (4K approved) Description: The Sony FMP-X5 / FMP X-10 is a media player that comes pre-installed with Netflix with the possibility to show 4K content. We have made the PUC codes available for it, so that you will be able to control it with the Bang & Olufsen remote as if it was built into the TV. It is also possible to use this through the Atlona UHD matrix line, but be aware that UHD TV s can not watch the player at the same time with Full-HD TV s. A dedicated player is required for UHD TV s in that case. Requirements: B&O SW 1.0.10 or higher is required for BeoVision Avant 55/75/85 Connect it to 1 on the Avant. Only this input supports 2.0 and HDCP 2.2 which is required for Netflix 4K. Accessories needed: Sony FMP-X5 / X10 (Purchase locally) UHD capable cable 0.5 m class 2 (UHD capable) 6271258 0.75 m (UHD capable) 6270940 1 m fully shielded (UHD capable) 6271254 1 m (UHD capable) 6270942 1.2 m (UHD capable) 6270957 5 m class 2 (UHD capable) 6271256 10 m (UHD capable) 6271257 IR blaster cable 6271234 NOTE: The player does not fit into the socket panel of any of our TV s.
Idea Catalogue 26 Android TV & 4K content on the BeoVision Avant-55/75/85 (Nvidia SHIELD) Since BeoVision Avant does not have the built-in capabilities to decode H.265 HEVC codec that is required for viewing Netflix & YouTube 4K, we have tested a solution that enables the customer or the store personnel to demo and watch 4K content on their BeoVision Avant. BeoVision Avant-55/75/85 PUC cable (IR) Nvidia SHIELD (4K approved) Using Nvidia Shield for 4K demo in the store with MX Player: Download configuration file from BeoWise -> BeoVision Avant -> Tips -> Using Nvidia Shield for 4K demo in the store and place it on a USB stick in the same folder as the demo video s. Place the USB stick in the input on the back of the Nvidia Shield 1. Log in to Google Play Store (If you do not have a Google account, you need to register one). 2. Search for and install MX Player from Play Store. 3. Open MX Player and select settings. (Select the 3 dots in the upper right corner and then Settings ). 4. Select General. 5. In the bottom of the list, select Import. 6. Step one or two levels up until you can select Usbdrive or Usbdrive2 depending on which USB input you are using on the Nvidia Shield. 7. When input has been selected, select MX_Player_Settings.xml and press OK. 8. Program must be restarted (happens automatically) and then the player is ready to play and repeat the videos that are placed in the same folder on the USB stick. Description: The Nvidia SHIELD is a media player that comes pre-installed with Android TV with the possibility to show 4K content from YouTube & Netflix. We have made the PUC codes available for it. It is also possible to use this through the Atlona UHD matrix, but be aware that UHD TV s cannot share the player with Full HD TV s. Requirements: B&O SW 1.0.10 or higher is required for BeoVision Avant 55/75/85 Connect it to 1 on the Avant. Only this input supports 2.0 and HDCP 2.2 which is required for Netflix 4K. The player must be connected to the internet using a cable to ensure enough bandwidth for 4K (UHD) For optimal Netflix 4K viewing experience, manually adjust the output resolution to 4K 23.976 Hz here: SETTINGS > > RESOLUTION Accessories needed: Nvidia SHIELD (Purchase locally) UHD capable cable 0.5 m class 2 (UHD capable) 6271258 0.75 m (UHD capable) 6270940 1 m fully shielded (UHD capable) 6271254 1 m (UHD capable) 6270942 1.2 m (UHD capable) 6270957 5 m class 2 (UHD capable) 6271256 10 m (UHD capable) 6271257 IR blaster cable 6271234 NOTE: The player does not fit into the socket panel of any of our TV s.
Idea Catalogue 27 High Definition Audio Player for BeoLab 90 (Auralic Aries) In case you want to display an alternative media player to the BeoSound Moment, we recommend the Auralic Aries player. The Auralic Aries is a compact, affordable and globally available media player that is highly regarded among hi-fi enthusiasts. NAS drive (optional) USB Harddrive BeoLab 90 - Master LAN LAN Auralic Aries USB USB / OPTICAL / S/P-DIF Router ipad Description: Controlled from ipad using dedicated Auralic app. Accepts multiple audio file formats PCM formats: AAC, AIFF, ALAC, APE, FLAC, MP3, OGG, WAV, WV, WMA DSD formats: DIFF, DSF Multiple digital output formats (all supported by BeoLab 90) --USB-Audio --S/P-DIF --Optical Audio Does not introduce unnecessary processing. If BeoLab 90 can accept the format, the bits in the file are passed directly through. If the BeoLab 90 cannot meet the sampling rate, the Aries will down sample Compatible with network and local (USB) drives. Note that we (B&O) recommend that you connect the Aries to your network with an Ethernet cable. Wireless does work, but you may experience dropouts with a network drive, depending on your router. Customer can plug in a USB stick and start listening (Note that some time is required to catalogue the drive. The amount of time is dependent on the number of tracks on the USB drive.) Can be used as an Airplay or Songcast receiver Dimensions: 25 cm x 20 cm x 7 cm Other Specifications: http://www.auralic.com/ Can be used to stream Tidal and Qobuz from the Internet Globally available, see store locator http://www.auralic.com/storelocator.html
Idea Catalogue 28 Placing sources away from the TV in a single room (Atlona Switcher) Distance > 10m Customers want to hide away their sources like Blu-ray players, Apple TV etc. Having many sources connected requires an cable and a PUC cable for each source, which results in a huge cable bundle to hide away in cable trays on the wall or cable conduits in the wall. BeoVision TV IR Splitter AT-BO-RJ45-UHD-1MIR AT-UHD-EX-100CE-RX AT-UHD-SW-52ED IR Apple TV TViX IR Blaster IR Blaster CAT7 Kaleidescape IR Blaster Description: With the use of an Atlona 5x2 UHD switcher it is possible to hide away up to 5 sources. The switch is controlled as if it was a matrix. A PUC code is available for the switch. Setup as a MATRIX under MENU / SETUP / PRODUCT INTEGRATION and download the PUC file on the TV. Use the Atlona AT-UHD-SW-52ED IR codes. Download PUC files for the sources and setup the matrix sources. For more detailed installation instructions please see here: BeoWise > 3rd party products > distribution > Atlona > Switch/Expander > AT-UHD-SW-52 Accessories needed: Atlona AT-UHD-SW-52ED incl. power supply Atlona AT-UHD-EX HDBaseT receiver Atlona PUC cable AT-BO-RJ45-UHD-1MIR Partno. 8780339 IR extender kit (Ebay) Mini-jack stereo plug 5 pcs B&O IR blasters with 3.5mm mini jack (if not included in IR extender kit) Partno. 8330352 Limitations: Not possible to have more than one of each type of source connected. Only HDCP version 1.4 in the switcher, so 4K content with HDCP 2.2 is not supported through the switcher.
Idea Catalogue 29 Placing sources away from the TV in a single room (Atlona Switcher) Distance < 10m Customers want to hide away their sources like Blu-ray players, Apple TV etc. Having many sources connected requires an cable and a PUC cable for each source, which results in a huge cable bundle to hide away in cable trays on the wall or cable conduits in the wall. BeoVision TV IR Splitter IR-blaster cable w RJ45 Partno. 6271234 Apple TV IR Blaster AT-UHD-SW-52 Front IR TViX IR Blaster Kaleidescape IR Blaster Description: With the use of an Atlona 5x2 UHD switcher it is possible to hide away up to 5 sources. The switch is controlled as if it was a matrix. A PUC code is available for the switch. Setup as a MATRIX under MENU / SETUP / PRODUCT INTEGRATION and download the PUC file on the TV. Use the Atlona AT-UHD-SW-52ED IR codes. Download PUC files for the sources and setup the matrix sources. For more detailed installation instructions please see here: BeoWise > 3rd party products > distribution > Atlona > Switch/Expander > AT-UHD-SW-52 Accessories needed: Atlona AT-UHD-SW-52 incl. power supply IR-blaster cable w RJ45 Partno. 6271234 IR extender kit (Ebay) Mini-jack stereo plug 5 pcs B&O IR blasters with 3.5mm mini jack (if not included in IR extender kit) Partno. 8330352 Limitations: Not possible to have more than one of each type of source connected. Only HDCP version 1.4 in the switcher, so 4K content with HDCP 2.2 is not supported through the switcher.
Idea Catalogue 30 over CAT 7 Extender (long cable solution) For connection of sources that are placed more than 10 m away from the TV. Connecting a TV monitor or Projector that are more than 10 m away from BeoSystem 4. BeoVision 12-65 / BeoVision 4 RS232 IR Projector CAT7 (max. 100m) Stand Cable (max. 100m) IR cable (max. 100m) CAT7 (max. 100m) RS232 BeoSystem 3 / BeoSystem 4 BeoSystem 3 / BeoSystem 4 IR Projector Description Can transmit over one CAT 7 cable (up to 100 m). Supports 4K/ UHD/3D Accessories needed: Atlona Extender: AT-UHD-EX-70C-KIT (Max. 70 m) B&O partnr. 8780348 AT-UHD-EX-100CE-KIT (Max. 100 m) B&O partnr. 8780349 Atlona Optocoupler cable AT-BO-HD4V110-1MIR (PUC connection from BeoSystem 4 to Sender box (AT-HD- V110S) cables from BeoSystem 4 to box and from box to Monitor/ Projector (or from source to box and from box to TV). Find part no under Cables in the Catalogue in the Retail System or in the BeoLink Handbook). PUC-IR blaster or PUC minijack cables to controllable sources (find part no under PUC in the Catalogue in the Retail System or in the BeoLink Handbook)
Idea Catalogue 31 3rd party control systems Alternative control interface to Bang & Olufsen audio/video setups, typically involving large scale home automation installations. For control of Master Link products a BeoLink Gateway / MasterLink Gateway is needed. If the setup consists only of Network Link products it is possible to talk directly to the products without a gateway, using the drivers available via www.beointegration.com. MLGW/BLGW drivers are available for the following manufacturers: Direct IP drivers are available for the following manufacturers: Crestron, AMX, Control4 & Beckhoff Crestron, Control4, RTI & Savant Control processor Ethernet cable RF Remote / Touchpanel RS232 Network Link Ethernet cable Internet router/ Switch Network Link MLGW / BLGW Master Link System Important settings: Network Link TVs: Enable Quick Start Timers and Wake on LAN Set a fixed IP address for NL products or make a DHCP reservation in the router. Master Link TVs: In the Customer Service Menu > ADJUSTMENTS set STAT TO MLGW ON CMDS TO MLGW ON Make sure POWER SAVING is disabled in the main menu BLGW / MLGW: Enable MLGW Protocol over IP or RS232 (dependent on setup) Perform product assignment as guided in the menu (MLN Node number) Accessories needed: Recommended Internet router/switch MLGW or BLGW ( if any Master Link products) *) Drivers and demo program **) Ethernet cables *) Check BeoWise/Link/ML Gateway/Tips for MLGW/BLGW compatible products **)Download from http://www.beointegration.com Stay updated about new drivers and functionality from www.beointegration.com
Idea Catalogue 32 Mirror TV with BeoSystem 4 (Aquavision) TV integrated in the mirror in wet rooms connected to BeoSystem 4 offering full Bang & Olufsen remote control and linking to your home automation system via BeoLink Gateway. IR Blaster (Blaster end) IR Blaster (RJ45 end) cable Power Link Power Link CAT7 (max. 100m) IR cable CAT7 (max. 100m) cable Settings: Make sure the Aquavision TV supports Full-HD See the BeoLink Handbook for connection/wiring details regarding the IR eye and IR Blaster Set it up as a monitor and download the AquaVision IR codes to BeoSystem 4 Set remaining BeoSystem 4 settings up as you would any other normal system. The external speakers should be connected to BeoSystem 4 s Power Link outputs. This way they can be used for both BeoLink Multiroom and for TV viewing. Accessories needed: AquaVision monitor* IR blaster cable 6271234 IR eye 8087030 CAT7 Product Cable Atlona Extender: AT-UHD-EX-70C-KIT (Max. 70 m) B&O partnr. 8780348 AT-UHD-EX-100CE-KIT (Max. 100 m) B&O partnr. 8780349 *)Purchase locally
Idea Catalogue 33 Alternative stand and bracket solutions (STB Brackets) Company information STB Brackets has been making brackets complimentary to Bang & Olufsen since 1998. It has been recognised that STB supplements the stand program and delivers excellent solutions to the distribution. These solutions give increased flexibility when dealing with customer s needs. STB Brackets holds an official status as Bang & Olufsen s preferred partner for brackets and stands. Contact details Webpage: http://www.stbbrackets.co.uk Please e-mail your questions to: contact@stbbrackets.co.uk You can contact them on the telephone during normal office hours (9 am - 5.30 pm) (GMT) Monday to Friday Tel : +44 1 522 522 400 Note: STB brackets only have EU approval despite selling outside of Europe.
Idea Catalogue 34 Motorized lifts for TV s / Projectors (Future Automation) Description Experience and a background in custom installation gives Future Automation an unrivalled understanding of the challenges you face. It is this insight that has allowed them to develop the most comprehensive product range of its kind which, when combined with their bespoke service, means that they can deliver a solution for every project; whatever the size and however challenging. Contact details Accounts/sales/orders: info@futureautomation.co.uk or graham@futureautomation.co.uk North America / Marine: ollie@futureautomation.co.uk They also deliver the projector lift used for BeoLiving rooms and a ceiling bracket for projectors.
Idea Catalogue 35 3D Blu-Ray disc player for Bang & Olufsen TV s (OPPO BDP-103/105D) 3rd party DVD /Blu-Ray player (OPPO BDP-103/105D) to support Bang & Olufsen televisions that need a 3D and/or 2D disc player connected. OPPO BDP-103 player PUC IR cable cable Compatible with all Bang & Olufsen products with an input connector) Description With a IR PUC cable from the Bang & Olufsen televisions PUC output to the OPPO BDP-103/105D IR connector at the backside, the customer can operate the Blu-ray player using a Bang & Olufsen remote control. See the installation guide on BeoWise for more details. Order special B&O version without OPPO startup and pause logo. EU version:bdp-103eubo www.oppodigital.co.uk mail to: harriet@oppodigital.co.uk US/ROW version: BDP-103USBO www.oppodigital.com mail to: kevin@oppodigital.com Accessories: IR mini jack pn 6271086 (2.5 m), 6271097 (10m) IR mini jack/rj45 part no 6271214 (7.5 m) NOTE: If OPPO Blu-ray is connected to an Atlona matrix, a special PUC cable is needed. Please see service tip on BeoWise. OPPO EU mains cord UK and standard EU mains cords will be delivered along with the product. For Denmark, Switzerland and Italy, a separate mains cord must be purchased for proper installation with earth. Denmark (no. 6100036) Switzerland (no. 6100426) Italy (no. 6100429)
Idea Catalogue 36 Apple AirPlay Use your ipod/iphone/ipad as your music server and push content from your device to any AirPlay device you have. Push to Speakers Swipe up from the bottom of your AirPlay device and the AirPlay icon is shown if any Airplay devices are on the same LAN. Select the device of your choice, and the sound will start playing. *) or BeoSound Essence Push to TV Router Apple TV PUC Router Linked via Network (Multiroom) Linked via network operates in a very similar Apple TV way as the above, except that all content is pulled from your itunes application on your PC/Mac. PUC Ethernet or WiFi* PUC Apple TV PUC Router Mac or PC running itunes *Powerline is an option. Description You can push both video and music from your handheld device to your TV or speaker setup. The limitation is that only one device can be used at the time, and only one linked AirPlay device can be pushed to at any one time. See additional information under Apple TV or Apple Airport Express Apple System Apple itunes must be running on your computer if you want to see/hear music, photo or video from your computer. This system works by pulling content from the itunes computer to the device that you are using. The main benefit is that you can pull different content to different devices at the same time. PUC filename: Apple Remote www.apple.com/airplay/
Idea Catalogue 37 Use Apps on your TV screen (Apple TV - 4 th generation) On-screen access to a world of Apps for the TV usings Apples latest tvos.all controlled from your preferred Bang & Olufsen remote control. IR blaster -cable Apple TV Client PC or NAS Ethernet cable or WiFi* Router / Switch NB.*Powerline is an option. See the section on Devolo. Description Apple TV allows you to access internet TV like Netflix content directly on your Bang & Olufsen TV. Access to: App Store with a wide variety of offerings from video service providers like Netflix, HBO and Hulu as well as Media Server Apps for your own local content.i PUC file name: Apple remote Accessories needed: Apple TV (4 th generation) 32 GB / 64 GB. IR blaster (mini-jack) 8330352 IR blaster RJ45 x1 IR blaster = 6271234 IR blaster RJ45 x 2 IR blaster= 6271204 IR blaster RJ45 x 2 minijack (i.e. for OPPO)= 6271214 cable Ethernet cable (recommended) or WiFi B&O recommended router www.apple.com/airplay
Idea Catalogue 38 Belkin bluetooth music receiver Stream music from any bluetooth enabled portable device to the music receiver wirelessly BeoSound 5 Encore Note: Diagram is for illustration purpose only. Only one device can be used at a time. Description The music receiver converts the music stream to analogue signal in high quality. Connection settings: AV Input: Line input Adapter from RCA/phono plug to DIN may be required depending on the audio system used. http://www.belkin.com Accessories: Belkin bluetooth music receiver (find at www.amazon.com) Comes with both stereo, mini jack and RCA/phono plugs TIP: Line input on the audio system should be used Adapter from RCA/Phono plugs to DIN may be required If a BeoLink Gateway is connected to the Bang & Olufsen system, it is possible to control the Bang & Olufsen music system from the BeoLink app (Apple ios) Navigate to: BeoWise/3rd party products/portable Devices/Belkin BT receiver/apple AirPort Express
Idea Catalogue 39 Apple AirPort Express as Wi-Fi music receiver (AirPlay) Stream music from your portable Apple device and connect to the wireless home network. This functionality can also be obtained by using the BeoSound Essence BeoSound 5 Encore or Essence Router BeoSound 9000 or Essence Note: Diagram is for illustration purpose only. Only one device can be used at a time. Description The Apple AirPort Express converts the music stream to an analogue signal in high quality. If a wireless home network exists, the Apple AirPort Express should be connected to this. If no wireless network exists, the Apple AirPort Express must be configured as an access point. Connection settings: Beo4 command (A.AUX) Accessories: Apple AirPort Express Adapter from RCA/phono plug to DIN may be required depending on the audio system used. AUX DIN male to stereo RCA/phono female 20 cm: 6270302 www. apple.com/airplay
Idea Catalogue 40 DLNA (Digital Living Network Alliance) Is a standard used by a large number of manufacturers of consumer electronics to allow entertainment devices within the home to share their content with each other across a home network. It is a connecting standard for photo, video and audio content stored on a digital media. Request for information: BeoSound 5 Main data flow; Wireless data flow: NAS drive Digital Media Server (DMS) These devices store content and make it available to networked digital media players (DMP) and digital media renderers (DMR). Some digital media servers can also help protect your content once stored. Examples: PCs, MAC s and network attached storage (NAS) devices. Digital Media Player (DMP): These devices find content on digital media servers (DMS) and provide playback and rendering capabilities. Examples: TVs, stereos and home theaters, wireless monitors and game consoles. Digital Media Controller (DMC): These devices find content on digital media servers (DMS) and play it on digital media renderers (DMR). Examples: Internet tablets, Smart Phones (Android and ios devices), PC s, MAC s, Wi-Fi enabled digital cameras. DMR can be controlled by a DMC to play content from DMS. Digital Media Renderer (DMR): These devices are controlled from a digital media controller (DMC), which will find content from a digital media server (DMS). Examples: TVs, audio/video receivers, video displays and remote speakers for music. Description You need a home network. We prefer wired networks to co-exist with the Network Link infrastructure which is recommended by Bang & Olufsen. Wireless links or Powerline are optional. DLNA certified devices today connect, discover and communicate with each other over a network such as Network Link.
Idea Catalogue 41 BeoSound 5/BeoMaster 5 as source center BeoSound 5 Option 0/1/2 Option 1/2 AUDIO MASTER = OFF Master Link Description This set-up offers you two new sources (N.Music and N.Radio) on the Master Link system. Basic operation: N.MUSIC = BeoSound 5 stored music N.RADIO = BeoSound 5 Internet Radio CD = Audio master CD RADIO = Audio master radio A.AUX = Audio master (BeoSound 9000) AUX Input Setup: BeoVision option 1/2 Audio master (e.g. BeoSound 9000. Check BeoWise for relevant sw levels) option 0/1/2. BeoMaster 5 audio master option can be found here: (SERVICE MENU ROLES AUDIO MASTER NO)
Idea Catalogue 42 BeoSound 5 A.AUX input Behringer UCA222 (USB A-AUX adaptor). Get music from an external device on your Bang & Olufsen music system. DLNA - is built-in Bluetooth - use the Belkin device AirPlay - use AirPort Express BEOMASTER 5 BEOSOUND 5 Typically to headphone jack BeoSound 5 NB. Not that if you connect third party TV sound it will give a sound delay Additional music from 'Line-in' connection You can now listen to music from an external device on your Bang & Olufsen music system. The BEHRINGER UCA 222 is a USB-to-Audio interface that allows this seamlessly. Plug the UCA222 directly into the USB port on your BeoMaster 5 Plug your external device into RCA input on the UCA 222 Select A.AUX from the mode section on BeoSound 5 Sit back and enjoy. Basic operation N.MUSIC = BeoSound 5 stored music N.RADIO = BeoSound 5 Internet Radio - A.AUX = External device connected via Behringer - BeoSound 5/BeoMaster 5 must be selected and setup as audio master. Note, if sound from a 3rd party TV is added to AUX input, delay will occur (lip sync problem).
Idea Catalogue 43 Kaleidescape (high-end A/V distribution) Kaleidescape Server CAT7 (max 100 metres) CAT7 (max 100 metres) Kaleidescape Client IR blaster Internet router/switch (Gigabit) Cisco CAT7 (max 100 metres) Kaleidescape Client IR blaster Internet CAT7 (max 100 metres) Kaleidescape Client IR blaster CAT7 (max 100 metres) Kaleidescape Client IR blaster Description This solution offers a complete digital audio/video library to be accessed throughout the entire Bang & Olufsen video range in your home. All controlled by your preferred Bang & Olufsen remote control. It is also possible to share one or more players to all the TV s using an Atlona matrix switcher instead of having a player for each TV. PUC file name: G Kaleidescape Accessories needed: Kaleidescape system*) IR blaster (mini-jack) 8330352 IR blaster RJ45 x1 IR blaster = 6271234 IR blaster RJ45 x 2 IR blaster= 6271204 IR blaster RJ45 x 2 minijack (i.e. for OPPO)= 6271214 cable CAT7 cable (500m reel 6250027) *)Find dealer on http://www.kaleidescape.com/buy/