switching, distribution, interfacing and control products for computer graphic, multi-media and audio visual systems integration

switching, distribution, interfacing and control products for computer graphic, multi-media and audio visual systems integration

Contact details Procon Technology 3 Avebury Court Hemel Hempstead Hertfordshire England HP2 7TA UK Tel +44 (0)1442 242 224 Fax +44 (0)1442 245 312 E-Mail sales@procon.co.uk Web www.procon.co.uk Office hours 0900 to 1700 (UK Local Time) Monday to Friday Dealer network Our products are only available through our Registered Dealers and Distribution Network. Please contact us for details of your local stockist or dealer. Technical support Committed to providing the very best support Procon Technology can be contacted on +44 (0)1442 242224 via e-mail technical@procon.co.uk or visit our web site www.procon.co.uk for further help and advice. EU manufacturer Procon Technology is an engineering, manufacturing company based within the UK. Our products are available through distributors and dealers throughout Europe. For OEM enquiries please contact us directly at sales@procon.co.uk 5 year warranty All Procon products are backed up by our 5-year parts and labour warranty. Within this period, we guarantee all items to be free from defects. In the unfortunate event of an item failing please contact us for an RMA number. conformity All our products carry the mark. This ensures that products meet the essential requirements of all relevant EU directives for electrical safety, emissions and immunity. RoHS All products conform to the EU directive for the restricted use of certain hazardous materials in electrical and electronic products. WEEE To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate items marked with this symbol from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

UK based ProCon Technology has been manufacturing audio visual products since 1989. We are proud to have pioneered a number of key innovations within the industry from the early days of computer interfacing through to developing the first seamless switching system for use in rental and staging. Our innovative spirit continues today, with the introduction of cost effective, simple to use room control products. Amongst recent product launches is our IP control interface range, which allows the monitoring, control and management of audio visual devices over a network using our Site Manager software. Our aim is to provide all of our customers with the highest quality products for simple cost effective system integration. control systems 02 IP control 13 input plates 16 switchers & matrices 23 distribution amplifiers 33 accessories & fixings 42 RS232 protocols 44 case studies 46 warranty 47 product index 48 procon catalogue 01

control systems 86X Display Controllers The latest in the series of Control Panels from ProCon offers new and unique entry level control of display devices such as LCD and DLP projectors and LCD and Plasma displays. The highly cost effective new 86X Display Controllers feature simple downloadable programs from the website www.procon.co.uk for most makes and model of device. Flexibility is uncompromised as custom programs can also be written from within the 86X programming software, also downloadable from the website. The 86X Panels feature both RS232 and Infra-red control ports as well as Input port which when used in conjunction with a PIR motion detector can start Down routines in order to increase lamp and display life when a system is not being used. 84X Master Control Panels The most versatile and expandable Control Panels offering total compatibility along with exceptional programming capabilities yet providing affordable and flexible control of Audio Visual environments. 85X Slave Control Panels The Slave Panels are designed to enhance systems providing even more control. They link to Master Control Panels to provide extra buttons or to repeat a set of buttons already used. Additionally, they can be used as human interface for the 87X series Control System as well as any other manufacturers control system that can be programmed to listen to RS232 commands sent from any of the Slave Panels. 87X Control System The new 87X Control System provides all of the capabilities of the ProCon range of Control Panels within one simple unit that can be rack mounted for easy system integration. Offering a host of connectivity for RS232, Infra-red, Relay Contacts, IO port and optional IP Control the 87X can be controlled from ProCon Slave Panels or any other manufacturers RS232 device. The ProCon IR to Serial convertor (page 12) however now makes the ProCon Control System solution even more versatile by allowing portable remote control from anywhere within the room. IP Control Units Remote management, control and monitoring of AV devices for single and multi-room AV installations alike. The IP Control Units integrate products from different manufacturers into a single controllable solution either over an IP network with device and group scheduling, email alerts, lamp, power and security monitoring features or an isolated environment with the on-board control function scheduler. Site Manager Enables the remote access to the IP Control Units over the network or local schedule programming and is available as single and multiuser version. 02 procon catalogue

SPECIFICATION Switches Tactile 4 Ports 1 RS232 TX + Gnd 1 Infra-red TX + Gnd 1 Input RS232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms Input Port External switch detect 12V Size 8604-01 UK 2-gang 21mm depth 8654-01 DIN 2-gang 21mm depth Program 12V Supply IR Transmitter Head 86X Software see page 43 for mounting options 8604-01 8654-01 FEATURES Projector, Plasma, LCD display control RS232 Serial, Infra-red control Logic Input port Preconfigured downloadable device drivers 4 Button Display Control Panel The 86X Display Control Panels are simple interfaces for Audio Visual control. Designed for easy use and installation the 86X Panels support both Infra-red and RS232 Serial controlled projector, plasma and LCD displays. The intuitive look and feel allows a user to walk-in and operate the system with little or no instruction. The 8604-01 and 8654-01 feature 4 buttons. The circular red backlit power toggle button and three Data, Video, and Blank green backlit buttons for source selection. Complex programming with additional 86X software down routines for lamp and power saving 4 Coloured backlit buttons 2 Gang UK and DIN mounting plates The 86X Control Panel are pre-assembled with all buttons and legends silk screened on the faceplate meaning a faster installation. Programming is via simple downloadable programs for basic installations, just select the model of the device and download it to the panel with the 86X software, more complex programs can be written with the software for those requiring a customized environment. Connections on the rear of the 86X Panels are for Infra-red and RS232 Serial control and can be used simultaneously to operate a number of devices, for example a projector and an AV amplifier. new 8606-01 8656-01 FEATURES Projector, Plasma, LCD display control RS232 Serial, Infra-red control Logic Input port Preconfigured downloadable device drivers 6 Button Display Control Panel The 86X Display Control Panels are simple interfaces for Audio Visual control. Designed for easy use and installation the 86X Panels support both Infra-red and RS232 Serial controlled projector, plasma and LCD displays. The intuitive look and feel allows a user to walk-in and operate the system with little or no instruction. The 8606-01 and 8656-01 feature 6 buttons. The circular red backlit power toggle button and three Data, Video, and Blank green backlit buttons for source selection. In addition 2 yellow backlit buttons offer the user volume control. Complex programming with additional 86X software down routines for lamp and power saving 6 Coloured backlit buttons 2 Gang UK and DIN mounting plates The 86X Control Panel are pre-assembled with all buttons and legends silk screened on the faceplate meaning a faster installation. Programming is via simple downloadable programs for basic installations, just select the model of the device and download it to the panel with the 86X software, more complex programs can be written with the software for those requiring a customized environment. Connections on the rear of the 86X Panels for are Infra-red and RS232 Serial control and can be used simultaneously to operate a number of devices, for example a projector and an AV amplifier SPECIFICATION Switches Tactile 6 Ports 1 RS232 TX + Gnd 1 Infra-red TX + Gnd 1 Input RS232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms Input Port External switch detect 12V Size 8606-01 UK 2-gang 21mm depth 8656-01 DIN 2-gang 21mm depth Program 12V Supply IR Transmitter Head 86X Software see page 43 for mounting options new procon catalogue 03

new SPECIFICATION Switches Tactile 7 Ports 1 RS232 TX + Gnd 1 Infra-red TX + Gnd 1 Input RS232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms Input Port External switch detect 12V Size 8607-01 UK 2-gang 21mm depth 8657-01 DIN 2-gang 21mm depth Program 12V Supply IR Transmitter Head 86X Software see page 43 for mounting options 8607-01 8657-01 7 button Display Control Panel FEATURES Projector, Plasma, LCD display control RS232 Serial, Infra-red control Logic Input port Preconfigured downloadable device drivers The 86X Display Control Panels are simple interfaces for Audio Visual control. Designed for easy use and installation the 86X Panels support both Infra-red and RS232 Serial controlled projector, plasma and LCD displays. The intuitive look and feel allows a user to walk-in and operate the system with little or no instruction. The 8607-01 and 8657-01 feature 7 buttons. The circular red backlit power toggle button and four Data 1, Data 2, Video, and S-Video green backlit buttons for source selection. In addition 2 yellow backlit buttons offer the user volume control. Complex programming with additional 86X software down routines for lamp and power saving 7 Coloured backlit buttons 2 Gang UK and DIN mounting plates The 86X Control Panel are pre-assembled with all buttons and legends silk screened on the faceplate meaning a faster installation. Programming is via simple downloadable programs for basic installations, just select the model of the device and download it to the panel with the 86X software, more complex programs can be written with the software for those requiring a customized environment. Connections on the rear of the 86X Panels are for Infra-red and RS232 Serial control and can be used simultaneously to operate a number of devices, for example a projector and an AV amplifier. 8404-03 4 Button Master Control Panel FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8404-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 4 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 2 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons to be activated. ProCon Slave (see page 07) Panels can be connected to one of the dedicated RS232 ports to replicate or add more control buttons to an existing Master Panel. 24 buttons can be programmed in any system with the 84X software down routines for lamp and power saving 4 Blue backlit buttons 2 Gang UK mounting plates (downloadable from www.procon.co.uk/support) as well as Start-Up and Timeout routines to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for visual status information. All connections are on the rear of the panel via screw terminals. The 8404-03 is supplied in either Grey, White or Brushed Silvered Aluminium finish and comes complete with the 12V power supply and an infra-red blink transmitter head. The buttons can be labelled using the selection of preprinted inserts on page 08 or customized by printing onto acetate. GENERAL SPECIFICATION Switches 4 x tactile Ports 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) Memory 500 Bytes RS 232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12 V Size 8404-03 UK 2-gang 29mm depth Program 12V Supply IR Transmitter Head 84X Software Models available 8404-03A Brushed silvered aluminium 8404-03G Grey 8404-03W White see page 43 for mounting options 04 procon catalogue

8406-03 6 Button Master Control Panel SPECIFICATION Switches 6 x tactile Ports 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) Memory 500 Bytes Ram RS 232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12 V Size 8406-03 UK 2-gang 29mm depth Program 12V Supply IR Transmitter Head 84X Software Models available 8406-03A Brushed silvered aluminium 8406-03G Grey 8406-03W White see page 43 for mounting options FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8406-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 4 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 2 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons to be activated. ProCon Slave (see page 07) Panels can be connected to one of the dedicated RS232 ports to replicate or add more control buttons to an existing Master Panel. 24 buttons can be programmed in any system with the 84X software down routines for lamp and power saving 6 Blue backlit buttons 2 Gang UK mounting plates (downloadable from www.procon.co.uk/support) as well as Start-Up and Timeout routines to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for totally flexible programming of the system whilst allowing excellent visual status information. All connections are on the rear of the panel via screw terminals. The 8406-03 is supplied in either Grey, White or Brushed Silvered Aluminium finish and comes complete with the 12V power supply and an infra-red blink transmitter head. The buttons can be labelled using the selection of preprinted inserts on page 08 or customized by printing onto acetate. 8408-03 8 Button Master Control Panel FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8408-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 4 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 2 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons to be activated. ProCon Slave (see page 07) Panels can be connected to one of the dedicated RS232 ports to replicate or add more control buttons to an existing Master Panel. 24 buttons can be programmed in any system with the 84X software down routines for lamp and power saving 8 Blue backlit buttons 2 Gang UK mounting plates (downloadable from www.procon.co.uk/support) as well as Start-Up and Timeout routines to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for totally flexible programming of the system whilst allowing excellent visual status information. All connections are on the rear of the panel via screw terminals. The 8408-03 is supplied in either Grey, White or Brushed Silvered Aluminium finish and comes complete with the 12V power supply and an infra-red blink transmitter head. The buttons can be labelled using the selection of preprinted inserts on page 08 or customized by printing onto acetate. SPECIFICATION Switches Ports Memory RS 232 8 x tactile 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) 500 Bytes Ram Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12 V Size 8408-03 UK 2-gang 29mm depth Program 12V Supply IR Transmitter Head 84X Software Models available 8408-03A Brushed silvered aluminium 8408-03G Grey 8408-03W White see page 43 for mounting options procon catalogue 05

new SPECIFICATION Switches Ports Memory RS 232 8 x tactile 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) 500 Bytes Ram Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12V Size 2U 29mm depth Program 12V Supply 84X Software 8808-03 8828-03 FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8808-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 3 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 1 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons activated. For the 8828-03 an 8 Button Slave Panel is connected to make a total of 16 buttons. With the 84X software (downloadable from www.procon.co.uk/support) Start-Up 8 Button Master Control Panel 8 Button Master and 8 Button Slave Control Panel down routines for lamp and power saving 8/16 Blue backlit buttons 2U Rack Mount and Timeout routines can also be programmed to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for totally flexible programming of the system whilst allowing excellent visual status information. All connections are on the rear of the panel via screw terminals. The 8808-03 is supplied complete with the 12V power supply and an infra-red blink transmitter head. The buttons can be labelled using the selection of pre-printed inserts on page 08 or customized by printing onto acetate. 8416-03 16 Button Master Control Panel FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8416-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 4 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 2 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons activated. ProCon Slave (see page 07) Panels can be connected to one of the dedicated RS232 ports to replicate or add more control buttons to an existing Master Panel. 24 buttons can be programmed in any system with the 84X software down routines for lamp and power saving 16 Blue backlit buttons (downloadable from www.procon.co.uk/support) as well as Start-Up and Timeout routines to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for totally flexible programming of the system whilst allowing excellent visual status information. All connections are on the rear of the panel via screw terminals. The 8416-03 is supplied in either Grey, White or Brushed Silvered Aluminium finish and comes complete with the 12V power supply and two infra-red blink transmitter head. The buttons can be labelled using the selection of preprinted inserts on page 08 or customized by printing onto acetate. SPECIFICATION Switches 16 x tactile Ports 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) Memory 1000 Bytes Ram RS 232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12 V Size 215 x 100 x 35 Program 12V Supply IR Transmitter Head x2 84X Software Models available 8416-03A Brushed silvered aluminium 8416-03G Grey 8416-03W White see page 43 for mounting options 06 procon catalogue

SPECIFICATION Switches 16 x tactile Ports 2 x IR or RS232 (1 and 2) 1 x RS232 TX + Gnd (3) 1 x RS232 TX, RX + Gnd (X-port) Memory 1000 Bytes Ram RS 232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 12 V Size 2U Program 12V Supply IR Transmitter Head x2 84X Software 8816-03 FEATURES RS232 Serial, Infra-red control Logic Input/Output port Library driven programming with 84X software The 8816-03 Control Panels offer the complete solution for a cost-effective control system in a single unit. 4 ports are available for connection to Infra-red and RS232 serial controlled devices, 2 of these ports can be programmed for either IR or RS232 while 2 ports remain dedicated to RS232. Each button can be programmed to perform a single event or series of events (macro) either on pressing, releasing or toggling (max 4) the button. These events can include RS232, Infra-red and external relay commands, time delays, button feedback, and advanced features such as Advance Toggle and Bank Enable allowing groups of buttons to be activated. ProCon Slave (see page 07) Panels can be connected to one of the dedicated RS232 ports to replicate or add more control buttons to an existing Master Panel. 24 buttons can be programmed in any system with the 84X software Rack Mounted 16 Button Master Control Panel down routines for lamp and power saving 16 Blue backlit buttons 2U Rack Mount (downloadable from www.procon.co.uk/support) as well as Start-Up and Timeout routines to automatically set the environment and preserve lamp life and power. The 84 Master and 85 Slave Series panels feature buttons which can be labelled according the user requirement and include blue LED backlight as well as programmable On and Flash modes. Groups of button feedback can be created for totally flexible programming of the system whilst allowing excellent visual status information. All connections are on the rear of the panel via screw terminals. The 8816-03 comes complete with the 12V power supply and two infra-red blink transmitter head. The buttons can be labelled using the selection of pre-printed inserts on page 08 or customized by printing onto acetate. new 8504-03 8506-03 8508-03 8516-03 8580-03 Slave Control Panels SPECIFICATION Switches Ports 4, 6, 8, 16 x tactile 2 x RS232 1 From Master 1 Slave RS 232 Baud Rate 9600 Data Bits 8 Stop Bits 1 Parity None 12 V Size 4, 6, 8 UK 2-gang 16 215 x 100 x 35 12V Supply FEATURES 4, 6 and 8 Button 16 Button Transport/Menu/Camera Control The Slave Panels provide additional control for the ProCon Master Panels and either replicate an existing panel or add more buttons up to 24 in any system. Connections for these are on a bi-directional Serial bus and 12V is required to power the units. The Slave Panels do not require programming as this is a part of the Master Panel function. Blue LED Backlit Buttons Selection of finishes The Slave panels are supplied in either Grey, White or Brushed Silvered Aluminium finish and come complete with the 12V power supply. The buttons can be labelled using the selection of pre-printed inserts on page 08 or customized by printing onto acetate. Models available Brushed silvered aluminium 8504-03A 4 Button 8506-03A 6 Button 8508-03A 8 Button 8516-03A 16 Button 8580-03A 8 Transport/Menu Button Grey 8504-03G 4 Button 8506-03G 6 Button 8508-03G 8 Button 8516-03G 16 Button 8580-03G 8 Transport/Menu Button White 8504-03W 4 Button 8506-03W 6 Button 8508-03W 8 Button 8516-03W 16 Button 8580-03W 8 Transport/Menu Button see page 43 for mounting options procon catalogue 07

89 Series Pre-Labelled Button Inserts 8901-00 On 8913-00 PC1 8924-00 Sat 8935-00 Proj On/Off 8902-00 Off 8914-00 PC2 8925-00 Ch+ 8936-00 Proj On 8903-00 On/Off 8915-00 Aux 8926-00 Ch- 8937-00 Proj Off 8904-00 VHS 8916-00 Screen 8927-00 PC/Video 8938-00 Cass 8905-00 DVD 8917-00 Doc Cam 8928-00 Video 8939-00 PC 8906-00 Play 8918-00 Pause (16 button) 8929-00 Screen Up 8940-00 TV 8907-00 >> 8919-00 Stop (16 button) 8930-00 Screen Down 8941-00 VHS/DVD 8908-00 Stop 8920-00 >> (16 button) 8931-00 Auto Image 8942-00 Visualiser 8909-00 Video Conf 8921-00 Pause 8932-00 Pic Mute 8943-00 Blank Screen 8910-00 Volume Up 8922-00 Blank 8933-00 Vol Mute 8944-00 DVD Menu 8911-00 Volume Down 8923-00 Mute 8934-00 Main PC 8945-00 DVI 8912-00 Laptop 8360-01 IR Transmitter Head 8365-01 IR Transmitter Head 8370-01 Dual IR Transmitter Head 8100-01 8110-01 Programming Cable 84x Panels 87X 8300-03 8350-01 Programming Cable 86x Panels 08 procon catalogue

GENERAL SPECIFICATION Memory 8K Bytes Ram RS 232 Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity None, Odd, Even Command String 1-22 Bytes Infra-red IR Transmit PPM or PWM PWM Frequency 30-62KHz PPM Period Range 100us-2ms IO Port Input External switch detect Output Hi or Low state 100-240V 50/60Hz 8700-03 8701-03 87X Programmable Rack Control System new Program 87X Software Optional Rack mount 3900-00 FEATURES Programmable Control System Infra-red Control RS2332 Serial Control Auxiliary Ports The new 87X Programmable Rack Control System combines many of the features of ProCon Control panels along with built-in mains Relay control. The unit is also available with optional IP Control for remote management, control and monitoring using ProCon s Site Manager software. For added flexibility more ports are available for connection to RS232, Infra-red and auxiliary ProCon products. The system can be controlled from any RS232 Serial device such as a ProCon Slave Panel or the 8230-01 Infra-red to RS232 Convertor along with an IR learnable handset. IR/RS232 Ports 2 transmit ports for Infra-red or RS232 Serial control depending on the requirements and program. Two IR transmitter heads can be attached to each port or multiple RS232 devices attached in parallel. RS232 Ports 2 ports for Serial transmit only or bi-directional communications when the IP option is enabled to allow monitoring and control of any device attached to those ports. Closed Loop Port provides security when IP Control is installed. A closed loop attached to all vulnerable equipment sends an E-mail alert when broken via the 2 Internal Relays with power IO Port Rack mountable Optional IP Control on-board SMTP server. I/O Port logic level port for triggering events either from an input detection or triggering an output to control external devices. This port is programmed for either an Input or Output but does not provide any current drive for relay control. Aux Ports 2 auxiliary ports for connection of any Serial controller or controlled device such as 85X Series Slave Panels. Relay 2 internal mains relays can be used for either high or low current devices. These are wired inside the unit for complete isolation and can be used to control screens, curtains, hoists, or projector power or just provide a simple contact closure interface to lighting circuits etc. Programming is via the optional 8100-01 cable with software available from the website at www.procon.co.uk/support. Relay connection examples Models available 8700-03 Programmable 87X Control System 8701-03 Programmable 87X Control System with IP procon catalogue 09

8200-03 Low Voltage and Mains Switching Relay Unit Mains relay Double Pole Normally Open Rating 10A 240VAC Contacts Silver Alloy Low Voltage Relays 1 to 6 Single Pole Normally Open Rating 2A at 28VDC Contacts Silver Alloy Relay States On/Off Momentary for up to 1 minute Control RS232 or ProCon Control System Front Panel Mains relay Operation Test for low voltage relays 12V Dimensions w-220 h-44 d-115 1.5kg 6 Amp mains switching on IEC 7 x 2 Amp Low Voltage switching using rewireable plugs ProCon Control Panel compatible RS232 controllable Addressable Optional rack mounting kit 12V supply Optional Rack mount 3900-00 The ProCon 8200-03 is a versatile relay unit ideally suited as an interface between serial communication and high and low voltage switching. It can be added to the range of ProCon Control Panels to allow additional functionality as an easy solution for powering and controlling equipment by contact closure. The 8200 is also controllable from any other control system by using a simple set of RS232 commands. The unit can be stand-alone or with the 1U rack mount option it can be easily integrated into a complete system. Typical applications for the main relays may be system or rack power on and off, or projector power on and off. For the low voltage relays, low voltage and current electric screens, curtain control, low voltage lighting or loudspeaker switching. 8210-03 High Voltage Relay Unit 6 Amp Mains switching IEC 2 x 10 Amp High/Low Voltage switching Safety covered rewireable plugs Mains lighting/curtains/screen/hoist control ProCon Control Panel compatible RS232 controllable Addressable Rackmount Option Mains relay Double Pole Normally Open Rating 10A Contacts Silver Alloy High Voltage relays Single Pole Changeover Rating 10A 30V 10A 240V Contacts Silver Alloy Relay States On/Off Momentary up to 1 minute Control RS232 or ProCon Control System 100-240V 50/60Hz Dimensions w-220 h-44 d-115 1.5kg Optional Rack mount 3900-00 The ProCon 8210 is a versatile relay unit ideally suited as an interface between serial communication and high voltage switching. It can be added to our range of ProCon control Panels to allow additional functionality as an easy solution for heavy duty switching of equipment by contact closure. The unit is also controllable from any other control system by using a simple set of RS232 commands. The unit can be stand-alone or with the 1U rack mount option it can be easily integrated into a complete System. Typical applications for the mains switching relay are system or rack power on and off, or projector on and off whilst the 10A relays are suitable for high voltage/current electric screens and curtain control. 10 procon catalogue

8300-03 Infra-red Expansion Unit Infra-red transmission PPM or PWM Frequency range PWM 30Khz 62Khz PPM Minimum Period Range 100uS to 2mS Transmission states 1 to 50 pulses continuous Input / Output states Logic 0 0V Logic 1 +5V Control RS232 or ProCon Control System 100-240V 50/60 Hz Dimensions w-220 h-44 d-115 1.5kg Program Optional Rack mount 3900-00 83x or 84x Software 6 x Infra-red transmission ports 2 x Input/Output ports LED status indication On-board infra-red learning ProCon Control Panel compatible RS232 controllable Addressable Optional rack mount The ProCon 8300-03 is a versatile unit ideally suited as an interface between serial communication and infra-red control. It can be added to our range of ProCon Control Panels to allow easy expansion of the infra-red capabilities of the system. It can provide an additional 6 infra-red control ports each with LED indication during transmission. The 8300 can also be used as a learner for creating additional files to add to the infra-red library in the ProCon programming software. Two input/output ports are provided and they can be configured to set a logic state on the ports or can be set to detect a change in logic state on the ports. The unit is also controllable from any other control system by using a simple set of RS232 commands to create a simple RS232 to infra-red interface. The 8300-03 is mains powered and supplies 12V out to any ProCon Control Panel and may be fitted with the optional rack mount for easy integration into a system. 8350-01 Infra-red Learning Unit Learner software requirements: PC with windows 95/98/XP version for 2000 available Infra-red learner type PPM/PWM Frequency range PWM 30KHz 62KHz PPM Minimum Period Range 100uS-2mS Test Transmission 5 pulses 100-240V 50/60Hz Dimensions w-220 h-44 d-115 1.5kg Infra-red learning Creates library files for ProCon software LED status indication Built in infra-red transmitter for testing Learning 84x, 86x, 87x Software The ProCon 8350 unit is used as a learner for creating additional files to add to the Infra-red library in the ProCon programming software. Files are created using simple to use software. The 8350-01 and IR learning now supports USB to serial adaptors with the latest 84x v6.0 available at www.procon.co.uk. A built-in infra-red transmitter is available for testing the captured functions. procon catalogue 11

new SPECIFICATION RS232 Ports 10 Receive 1 Transmit Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity NEO Connections RX 13 pin Rewirable TX 2 pin Rewirable 2.1 DC 12V DC Size w 75mm h 25mm d 103mm 230g 8220-01 FEATURES 10 RS232 Receive Ports Serial Combiner Rewirable Plug Connections 12V Supply 1 RS232 Transmit Port 12V The 8220-01 Serial Combiner is a unique solution to allow multiple RS232 transmit devices such as ProCon Control Panels to talk to a single RS232 receive device. With 10 receive ports and a single transmit port the Serial Combiner means a single device can easily be controlled from up to 10 points. The 8220-01 is housed in a metal enclosure with fixing points and has rewirable contacts for easy installation. new 8230-01 IR - RS232 Converter FEATURES IR Receiver Receive/ Transmit LED RS232 Transmit IR Transmitter for Learning 16 Programmable Commands 12V DC UK 1-gang wall plate SPECIFICATION Infra-Red Receive Transmit RS232 Ports 1 Transmit Baud Rate 1200-57600 Data Bits 7/8 Stop Bits 1/2 Parity NEO Connections TX 3 pin Rewirable TX/Gnd 2.1 DC or Pin 3 of TX plug 12V DC Size UK 1 Gang 51g Program 12V Supply 82x Software The highly compact 8230-01 IR to RS232 Serial Convertor provides the interface for devices normally controlled by RS232 to now be controlled from Infra-red. The Infra-red source could be any learnable handset as the 8230-01 has a built-in transmitter to learn from. Software allows 16 serial commands to be programmed into the unit and transmitted when the corresponding IR signal is received. The IR to RS232 Convertor is supplied in a discrete white mountable enclosure and with a 12V power supply. Programming is via the optional 8100-01 cable and software is available from the website at www.procon.co.uk/support. 12 procon catalogue

IP Control and Site Manager software V2 The NEW range of IP Control Units and Site Manager software provide the solution for control, monitoring and management of Audio-Visual equipment over a network. Devices such as projectors, plasma and LCD displays, a-v switchers and control systems can be attached to the IP Control Unit and their status displayed over the network using the Site Manager software. Site Manager will control the attached devices as well as monitor displays for status of power and lamp-life. Alarms can be triggered and alerts sent for lamps approaching end-of-life and breaches of security with unauthorised removal of equipment. Alerts can be audible, visual or via e-mail from the on-board SMTP server. Site Manager features Building and Room views of the connected IP Control Units which are displayed in a tree structure giving an at a glance view of the current status. Schedules of events can be setup and downloaded to the IP Control Unit with the Site Manager software for unattended 24/7 control and bring power and lamp-life savings to reality. The latest version 2 IP Control Units and Site Manager software include TCP/IP network communications, Default Gateway and Subnet Mask properties for crossing subnets and on-board non-volatile memory for scheduled events in case of network failure. Router 192.168.3.1 PC with Procon Site Manager IP Control Unit 192.168.1.2 TCP/IP NETWORK IP Control Unit 192.168.2.2 Router 192.168.1.1 Router 192.168.2.1 IP Control Unit 192.168.1.3 IP Control Unit 192.168.2.3 X-Port Serial TX Stand-alone control or network compatible IP Control Unit Features Internal Links Serial Serial Projector TCP/IP network connection Static or DHCP IP address Default Gateway and Subnet Mask properties On-board SMTP e-mail sever 2 Internal Timers IR Port Security Closed Loop port 1 or 3 Serial Port versions Optional Real-time Clock versions Non-volatile Schedules memory 12V DC Output Site Manager Software Features Administrator and Client versions At-a-glance visual status Device interrogation and control with feedback Create, import and export Profiles of Site Lists Create, import and export Device Libraries Other IP Devices / Webcams support Displays Global Control and Status Room Media Resource record Device Log file Network Firmware upgradeable AV Switcher procon catalogue 13

version 2 SPECIFICATION Ethernet Connector Data Rate Protocols Default Settings 1 x RJ45 with Activity and Link Status LEDs 10/100Base-T Half/Full Duplex with auto detect TCP/IP DHCP acquired IP, subnet mask and default gateway. Control Baude Rate 9600-115200 Timers 2 internal timers Memory Non-volatile memory (all models), battery backup on Real-time Clock version 8450-02 3 x RS232 Bi-directional 1 x RS232 Receive port 1 x Closed Loop 1 x IR Transmit port 8460-02 3 x RS232 Bi-directional 1 x RS232 Receive port 1 x Closed Loop 1 x IR Transmit port 1 x Real-time Clock Connector 2.1mm DC Voltage 12VDC Current Consumption 300mA (max). 350mA with 8416-03 connected Dimensions w-95 h-25 d-102 Fixing 2 x fixing holes 230g 12V Supply 8450-02 8460-02 3 independent bi-directional RS232 serial ports RS232 loop-through port 2 independent timers with non-volatile memory Real-time Clock option The 8450-02 is designed for monitoring, control, and management of three RS232 serial controlled devices. The three bi-directional serial ports provide for connection to projectors, plasma and LCD displays, switchers and local control systems. Each RS232 port is monitored over the network with feedback to the Procon Site Manager software. Control of any of these devices can then be made from the Site Manager software either by scheduling events, global power on/off command and viewer, or with a pre-built remote control GUIs. With the IP to RS232 Control Unit with 3 RS232 Ports Static or DHCP IP addressing IR port Closed loop alarm port 8450-02s two built-in timers and realtime monitoring of important data such as lamp-life management of any system is made even easier. The 8450-02 incorporates a closed loop port for security and an IR transmit port which can also be controlled over the network. The 8450-02 is supplied complete with a licence to use the Procon Site Manager software which allows multiple 8450-02 IP control units to be easily accessed with simple building and room views. version 2 8455-02 8465-02 Single RS232 serial port 2 independent timers with non-volatile memory Static or DHCP IP addressing The 8455-02 is designed for monitoring, control, and management of a single RS232 serial controlled device. The bi-directional serial port provides connection to projectors, plasma and LCD displays, switchers or local control systems. The RS232 port is monitored over the network with feedback to the Procon Site Manager software. Control of any of these devices can then be made from the Site Manager software either by scheduling events, global power on/off command and viewer, or with a pre-built remote control GUIs. With the 8455-02s two IP-RS232 Control Unit with one RS232 Port IR port Closed loop alarm port Real-time Clock option built-in timers and realtime monitoring of important data such as lamp-life management of any system is made even easier. The 8455-02 incorporates a closed loop port for security and an IR transmit port which can also be controlled over the network. The 8455-02 is supplied complete with a licence to use the Procon Site Manager software which allows multiple 8450-02 and 8455-02 IP control units to be easily accessed with simple building and room views. SPECIFICATION Ethernet Connector Data Rate Protocols Default Settings 1 x RJ45 with Activity and Link Status LEDs 10/100Base-T Half/Full Duplex with auto detect TCP/IP DHCP acquired IP, subnet mask and default gateway. Control Baude Rate 9600-115200 Timers 2 internal timers Memory Non-volatile memory (all models), battery backup on Real-time Clock version 8455-02 1 x RS232 Bi-directional 1 x Closed Loop 1 x IR Transmit port 8465-02 1 x RS232 Bi-directional 1 x Closed Loop 1 x IR Transmit port 1 x Real-time Clock Connector 2.1mm DC Voltage 12VDC Current Consumption 300mA (max). 350mA with 8416-03 connected Dimensions w-95 h-25 d-102 Fixing 2 x fixing holes 230g 12V Supply 14 procon catalogue

ProCon Site Manager Software version 2 Site List and Profiles - for easy organisational management, create a Site List with Building and Room names to match your environment. Save and load Site Profiles for flexibility and changing needs. The Site List is a tree structure that can be collapsed and expanded and also shows visual alerts for Building and Room status. A green tick to indicate all is well, a red cross to show a network failure and a red exclamation for a device alert triggered by the Closed Loop alarm or the Lamp Hours timer (1). Device Info - window includes information about connections to the IP Control Unit such as projectors, control panels, AV switchers etc. as well as displaying the Clock run time and the Closed Loop Status. Settings allow alert messages to be sent from Opening the Closed Loop and indicating a breach in security, Clock 1 run time alarm setting and either Clock 2 run time alarm setting or the actual Lamps Hours run time alarm setting (1). Properties can be saved to the IP Control Unit for either DHCP assigned or Static IP addresses as well as Default Gateway and Subnet Mask settings. The MAC address is also indicated for information purposes only. E-Mail settings can be stored within the IP Control Unit as well as upto 2 recipients can be named and stored. Scheduling - of events for any serial device connected to the IP Control Unit can be set on a 24/7 timer with any number of events being selected over that period. Multiple events can by triggered by actioning a button on a Control Panel for example. The events can also be sent a number of times with short 300ms delays so devices will respond correctly usually to Off commands or when a device has gone into sleep mode. These events are then stored in the IP Control Unit so even in the event of a network failure the scheduled sequence will still take place. Password - setting for secure access to your Site Manager software and details of the Site as well as the settings within it. Libraries for device drivers of Projectors, Plasma and LCD displays. Easy to update with import and export facility and allows you to create your own libraries for custom equipment requiring IP Control. Command strings can be entered in either ACSII or Hex and allows device name and model number as well as command protocols with baud rates from 1200 to 115200, 7 or 8 Data Bits, 1 or 2 Stop Bit and none, even or odd Parity Checking. A customisable device panel with 10 buttons is also available for configuration and control of other RS232 devices. Global Control - of display device power allows visual and easy switching on or off of Projectors, Plasma or LCD displays. The Global Display Control panel also enables you to create groups of displays and control On and Off within the groups as well as scheduling On and Off for each day of the week. The panel indicates Room name, Display name, current Lamp Hours (1) and power Status. Within the Settings menu the string command can be sent number times to wake-up displays which may go into sleep mode. Other IP devices - such as web cams can also be added to rooms and used to help provide remote support for a user or to verify a Closed Loop alarm indicating a theft is taking place. Room Information - provides an easy to use asset register working from Microsoft Word it allows the tracking of equipment within each room. This can be useful for logging serial numbers as well as maintenance schedules. Log - recording of alerts that occur within each room or over the network allow you to monitor the performance of the systems. Both for AV and network systems this is particularly useful in helping to track problems that may occur and preventing unnecessary alerts being triggered. Audible Alerts - can be heard when an alert takes place. Effectively ringing a bell when an alert is activated, this can be used in conjunction with visual alerts. Display Lamp Alarm - with the Settings menu when checked will display and the current Lamp Hours (1) of the device and issue an alert after a preset number hours. This could for example be used to pre-warn for an impending lamp change. Command Capture tool - allows the experienced user to capture new device RS232 return strings for verification of status. Firmware Update - allows IP Control Units to be firmware updated if necessary over the existing network and whilst in situ. Note (1) Assumes display is capable of sending this information. procon catalogue 15

input plates 1300-01 UK Single Gang PC and Audio 1311-01 DIN Single Gang PC and Audio 1301-01 UK Single Gang PC and Audio with AV s 1312-01 DIN Single Gang PC and Audio with AV s 1302-01 UK Double Gang PC and Audio with AV s 1303-01 UK Double Gang PC and Audio 1304-01 UK Double Gang PC and Audio with AV s 1305-01 UK Double Gang PC and Audio with AV s and S Video 1307-01 UK Single Gang Speaker 1308-01 UK Double Gang PC and Audio with AV, S Video and Control 1309-01 UK Double Gang Twin PC and Audio with AV + S-Video 1133-01 UK Double Gang PC and Audio Pass Thru 1134-01 UK Double Gang PC and Audio Pass Thru with AV and S-Video 1135-01 UK Double Gang PC and Audio Active 1136-01 UK Double Gang PC and Audio Active with AV and S-Video 1160-01/1175-01 Screw Terminal Floor Plates 1137-01/1173-01 Active and Passive BNC Floor Plates stop press - see page 42 16 procon catalogue

SPECIFICATION Input Connections PC PC Audio Output Connections PC PC Audio Size 1 x HDD15 1 x 3.5mm Stereo 1 x Screw Terminals 1 x Screw Terminals UK and DIN 1 Gang 1300-01 1311-01 Wall Box Input Plate Models available 1300-01 A UK Brushed silvered aluminium 1300-01 W UK White 1311-01 A DIN Brushed silvered aluminium 1311-01 W DIN White PC and Audio screw terminals White or brushed silver aluminium finish This quick and easy to install wall input plate is designed for fitting into standard single back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK + DIN single gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. 1301-01 1312-01 PC and Audio screw terminals White or brushed silver aluminium finish Wall Box Input Plate This quick and easy to install wall input plates is designed for fitting into standard single gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK + DIN single gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. SPECIFICATION Input Connections PC PC Audio Video Audio Output Connections PC PC Audio Video Size Audio 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 2 x RCA White/Red 1 x Screw Terminals 1 x Screw Terminals 1 x RCA Yellow Solder Bucket 2 x RCA White/Red Solder Bucket UK and DIN 1 Gang Models available 1301-01 A UK Brushed silvered aluminium 1301-01 W UK White 1312-01 A DIN Brushed silvered aluminium 1312-01 W DIN White SPECIFICATION Input Connections PC PC Audio Video Audio Output Connections PC PC Audio Video Audio Size 1 x HDD15 1 x 3.5mm Stereo 1 x BNC 2 x RCA White/Red 1 x Screw Terminals 1 x Screw Terminals 1 x BNC 2 x RCA White/Red Solder Bucket UK 2 Gang 1302-01 Wall Box Input Plate Models available 1302-01 A UK Brushed silvered aluminium 1302-01 W UK White PC and Audio screw terminals White or brushed silver aluminium finish This quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. procon catalogue 17

SPECIFICATION Input Connections PC PC Audio Output Connections PC PC Audio Size 1 x HDD15 1 x 3.5mm Stereo Screw Terminals Screw Terminals UK 2 Gang Plate 1303-01 Wall Box Input Plate Models available 1303-01 A UK Brushed silvered aluminium 1303-01 W UK White PC and Audio screw terminals White or brushed silver aluminium finish These quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. 1304-01 PC and Audio screw terminals White or brushed silver aluminium finish Wall Box Input Plate These quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. SPECIFICATION Input Connections PC PC Audio Video Audio Output Connections PC PC Audio Video Size Audio 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 2 x RCA White/Red Screw Terminals Screw Terminals 1 x RCA Yellow Solder Bucket 2 x RCA White/Red Solder Bucket UK 2 Gang Models available 1304-01 A UK Brushed silvered aluminium 1304-01 W UK White SPECIFICATION Input Connections PC PC Audio Video YC Audio Output Connections PC PC Audio Video Size YC Audio 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 1 x 4-pin Mini DIN 4 x RCA White/Red 1 x Screw Terminals 1 x Screw Terminals 1 x RCA Yellow Solder Bucket 1 x 4-pin Mini DIN Solder Bucket 4 x RCA White/Red Solder Bucket UK 2 Gang Models available 1305-01 A UK Brushed silvered aluminium 1305-01 W UK White 1305-01 PC and Audio screw terminals White or brushed silver aluminium finish Wall Box Input Plate These quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. 18 procon catalogue

SPECIFICATION Input Connections Speaker Output Connection Speaker Size 4-pole Speakon 4-pole Solder Bucket UK 1 Gang 1307-01 Wall Box Input Plate Models available 1307-01 A UK Brushed silvered aluminium 1307-01 W UK White 4 Pole Speakon White or brushed silver aluminium finish These quick and easy to install wall input plate is designed for fitting into standard UK single gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK single gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. 1308-01 PC and Audio screw terminals White or brushed silver aluminium finish Wall Box Input Plate These quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. SPECIFICATION Input Connections PC PC Audio Video YC Audio Control Output Connections PC PC Audio Video Size YC Audio Control 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 1 x 4-pin Mini DIN 4 x RCA White/Red 1 x 9-pin D 1 x Screw Terminals 1 x Screw Terminals 1 x RCA Yellow Solder Bucket 1 x 4-pin Mini DIN Solder Bucket 4 x RCA White/Red Solder Bucket 1 x 9-pin D Solder Bucket UK 2 Gang Models available 1308-01 A UK Brushed silvered aluminium 1308-01 W UK White SPECIFICATION Input Connections PC PC Audio Video YC Audio Output Connections PC PC Audio Video Size YC Audio 2 x HDD15 2 x 3.5mm Stereo 1 x RCA Yellow 1 x 4-pin Mini DIN 4 x RCA White/Red 2 x Screw Terminals 2 x Screw Terminals 1 x RCA Yellow Solder Bucket 1 x 4-pin Mini DIN Solder Bucket 4 x RCA White/Red Solder Bucket UK 2 Gang Models available 1309-01 A UK Brushed silvered aluminium 1309-01 W UK White 1309-01 PC and Audio screw terminals White or brushed silver aluminium finish Wall Box Input Plate These quick and easy to install wall input plate is designed for fitting into standard UK double gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK double gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. procon catalogue 19

SPECIFICATIONS 1133-01 Input Connections PC PC Audio Output Connections PC PC Audio 1 x HDD15 1 x 3.5mm Stereo 1 x HDD15 at 90 degrees 1 x Screw Terminals Plug 1133-01 1134-01 Passive Wall Box Input Plates 1134-01 Input Connections PC PC Audio Video YC Audio Output Connections PC PC Audio Video YC Audio 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 1 x 4-pin Mini DIN 2 x RCA White/Red 1 x HDD15 at 90 degrees 1 x Screw Terminals Plug 1 x RCA Yellow Solder Bucket 1 x 4-pin Mini DIN Solder Bucket 2 x RCA White/Red Solder Bucket 1134-01 Version shown 1133-01 Version shown Computer HDD15 and 3.5mm audio input 90 degree HDD15 and audio output Passive pass through Fits UK double gang back box The 1133 and 1134 series wall box input plates allow for an easy installation with high quality finish for a PC and audio input connection using a standard UK double gang back box. They are available in passive pass through with or without passive AV sockets. The PC outputs are on HDD15 and screw terminal contacts and are at 90 degrees to the input. Models available 1133-01G Passive PC and Audio Input (Grey) 1133-01W Passive PC and Audio Input (White) 1134-01G Passive PC and Audio Input with AV s (Grey) 1134-01W Passive PC and Audio Input with AV s (White) 1135-01 Active Wall Box Input Plates 1136-01 SPECIFICATION (Active Version): RGB Input Connector HDD15 socket Max Level 1V p-p Sync Input Type Analogue/TTL Impedance 470 ohm RGB Video Bandwidth 350MHz -3dB RGB Return Loss -45dB@10MHz, -27dB@100MHz Sync Processing TTL restore 1136-01 Version shown 1135-01 Version shown RGB Output Connector HDD15 socket Models available Computer HDD15 and 3.5mm audio input 1135-01G Active PC and Audio Input (Grey) Sync Output Level TTL 90 degree HDD15 and audio output 1135-01W Active PC and Audio Input (White) Audio Output Balanced/ Active version 1136-01G Active PC and Audio Input unbalanced Fits UK double gang back box with AV s (Grey) Input Voltage 12V Consumption 1W 1136-01W Active PC and Audio Input Dimensions (mm) w-147 h-86 d-30 with AV s (White) 186g The 1135 and 1136 series wall box input plates allow for an easy installation with high quality finish for a PC and audio input connection using a standard UK AV connections See 1134-01 above double gang back box. They are available in active versions with or without passive AV sockets. The PC outputs are on HDD15 and screw terminal contacts and are at 90 degrees to the input. The active versions feature 75 ohm driven outputs and TTL sync restore for connection to longer cable run. 12V Supply 20 procon catalogue

Screw Terminal Floor Box Fitting with Screw Terminal Connections 33mm PC and Audio screw terminals 65 degree PC input These quick and easy to install floor input plates are designed for fitting various standard and non standard floor box compartments. The passive floor Optional composite video and audio sockets connections provide the simple solution with the PC and Audio Inputs terminated onto screw terminals to reduce the need for complicated on-site soldering. Product Size PC + Audio PC + Audio + AV (3RCA) 1160-01 66 x 173 1161-01 66 x 173 1162-01 87 x 173 1163-01 87 x 173 1164-01 Ackermann GES9B 1165-01 Ackermann GES9B 1168-01 100 x 175 1169-01 100 x 175 1174-01 Ackermann 77 x 186 1175-01 Ackermann 77 x 186 1166-01 Custom Cut-To-Size 1167-01 Custom Cut-To-Size SPECIFICATIONS PC Input Connections PC 1 x HDD15 PC Audio 1 x 3.5mm Stereo AV Input Connections Video 1 x RCA Yellow Audio 2 x RCA White/Red Output Connections PC 1 x Screw Terminals PC Audio 1 x Screw Terminals AV Output Connections Video 1 x RCA Yellow Solder Bucket Audio 2 x RCA White/Red Solder Bucket Size As detailed Depth 33mm procon catalogue 21

Floor Box Fitting with BNC Tails SPECIFICATION (Active Version): RGB Input Connector HDD15 socket Max Level 1V p-p Sync Input Type Analogue/TTL Impedance 470 ohm RGB Video Bandwidth 350MHz -3dB RGB Return Loss -45dB@10MHz, -27dB@100MHz Sync Processing TTL restore RGB Output Connector Flying BNC sockets Sync Output Level TTL Audio Output Balanced/ unbalanced Input Voltage 12V Consumption 1W 186g 1137-01 Version shown 1138-01 Version shown Computer HDD15 and 3.5mm audio input 65 degree PC input BNC socket on output Active and passive versions 66 & 87 mm wide, GES9B and cut-to-size versions The 1137 series floor box input plates allow for an easy installation with high quality finish for a PC and audio input. They are available in passive, pass through, or active versions and with or without passive AV sockets. The outputs are on flying BNC sockets and screw terminal contacts. The active versions feature 75 ohm driven outputs and TTL sync restore for connection to longer cable runs. Product Size Active Passive PC + Audio PC + Audio+ AV 1137-01 66 x 173 1138-01 66 x 173 1139-01 66 x 173 1140-01 66 x 173 1141-01 87 x 173 1142-01 87 x 173 1143-01 87 x 173 1144-01 87 x 173 1145-01 Ackermann GES9B 1146-01 Ackermann GES9B 1147-01 Ackermann GES9B 1148-01 Ackermann GES9B 1156-01 100 x 175 1157-01 100 x 175 1158-01 100 x 175 1159-01 100 x 175 1170-01 Ackermann 77 x 186 1171-01 Ackermann 77 x 186 1172-01 Ackermann 77 x 186 1173-01 Ackermann 77 x 186 1151-01 Custom Cut-To Size 1152-01 Custom Cut-To Size 1153-01 Custom Cut-To Size 1154-01 Custom Cut-To Size Depth of all units = 33mm 22 procon catalogue

switchers 2020-01 2 x PC, 3 x Video and 5 x Audio, Auxiliary Audio and Mic with Volume Control Integration Switcher 2010-03 4 x PC, 6 x Video and 10 x Audio with Volume Control Integration Switcher 1113-05 PC 2 x 1 with Audio 1401-01 PC 2 x 2 with Audio 1600-04 PC 4 x 1 with Audio 1501-04 PC 6 x 2 with Audio 3805-03 Video and Audio 5 x 1 with Volume Control 3810-03 Video and Audio 10 x 1 with Volume Control 3505-03 Video 5 x 1 3510-03 Video 10 x 1 3705-03 S-Video 5 x 1 3710-03 S-Video 10 x 1 3605-03 Audio 5 x 1 with Volume Control 3610-03 Audio 10 x 1 with Volume Control 7500-03 Video Matrix 8 x 8 7540-03 S-Video Matrix 4 x 4 7600-03 Audio Matrix 8 x 8 7700-03 AV Matrix 8 x 8 7000-01 RGBHV Universal Matrix 4 x 2 to 8 x 8 procon catalogue 23

new RGB Input Number 2 Connectors HDD15 socket Max Level 1V p-p RGB Video Bandwidth 250MHz -3dB RGB Return Loss -38dB@10MHz, -20dB@100MHz Adjacent Input -80dB@10MHz, Crosstalk -70dB@100MHz Sync Input Level TTL/Analogue Max Level 5v p-p Video Input Number 3 Connectors RCA and 4pin Mini DIN Type CV or YC Video Bandwidth 50MHz -3dB Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase Error 0.05% Differential Gain Error 0.03% Input Crosstalk -60dB@1MHz Audio Input Number 6 Connectors RCA Type Unbalanced analogue Max Level 2V p-p Impedance 47K ohm Audio Response 20Hz-50KHz Microphone Balance/Unbalanced Phantom Switchable 12V Internal 48V External RGB Output Number 2 Sync Output Level TTL Video Output Number 2 Connectors RCA and 4-pin Mini DIN Audio Output Switched Unbalanced with volume control Mixed Balanced/Unbalanced Impedance 600 ohm Dimensions w-441 h-44, d-174 1U Rackmounting Included 200-240V 50/60Hz Consumption 15W 1.4kg 2020-01 Mini Integration Switcher Features 2 PC Inputs 2 Dual Driven PC Outputs PC Black mode 3 Composite or S Video inputs Video transcoded to Composite and S Video outputs 5 Audio and Auxiliary inputs with Volume Control Audio follow video and breakaway switching of all sources The 2020-01 Integration Switcher combines switching of PC, computer, video and audio for presentation and conference rooms, home cinema, AV Rental Companies and any environment where a number of mixed source types need to be displayed. The 2020-01 features a total of 5 AV inputs and a programmable serial output for controlling projectors, plasma and LCD displays. There are 2 wide-band (250MHz -3dB) computer inputs on HDD15 connectors, 3 video inputs each of which can be either composite or YC. 5 stereo audiofollow-video/computer inputs on RCA/Cinch connectors each with independent volume control and preset input attenuation which is retained within the non volatile memory of the 2020-01. Full video and audio breakaway is available with RS232 control along with a master volume control for total flexibility. Regardless of the video input type (CV or YC), both CV and YC outputs are available simultaneously which allows mixed format inputs to be displayed without switching. The 2020 also supports a balanced microphone (with phantom power if required) for which the gain and tone can easily be adjusted from the PC based setup software. The microphone input can be mixed onto the switched audio output and is then presented on a balanced mixed output. Phantom power and balanced microphone input 3 Band EQ on mic input Mix line and mic inputs to balanced output Rs232 and Front Panel Control RS232 Projector Control Projector status feedback to front panel (1) Software setup Control of the 2020 Integration Switcher can be from the front panel or by RS232 control from a computer or AV control system. The programmable serial output will control power on and off and switch the inputs of the projector or display. It is easily programmed from software which includes a library of common display devices to reduce installation time. Projector control includes programmable RS232 commands for ON/OFF, RGB, YC and CV inputs and when supported, the devices power status is interrogated and displayed on the front panel. (1) If supported by projector 24 procon catalogue

2010-03 Integration Switcher RGB Input Number 4 Connectors HDD15 socket Max Level 1V p-p RGB Video Bandwidth 350MHz -3dB RGB Return Loss -38dB@10MHz, -20dB@100MHz Adjacent Input -80dB@10MHz, Crosstalk -70dB@100MHz Sync Input Level TTL/Analogue Max Level 5v p-p Video Input Number 6 Connectors BNC Type CV or YC can be mixed Video Bandwidth 50MHz -3dB Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase Error 0.05% Differential Gain Error 0.03% Input Crosstalk -60dB@1MHz Audio Input Number 10 Connectors RCA phono socket Type Unbalanced analogue Max Level 2V p-p Impedance 47K ohm Audio Response 20Hz-50KHz RGB Output Sync Output Level TTL Video Output Number 2 Connectors BNC Type 2 x CV and 1 x YC Audio Output Type Unbalanced Gain with volume control Impedance 600 ohm Dimensions w-441 h-88, d-174 Control Baud Rate 9600-38400 2U Rackmounting Included 100-240V 50/60Hz Consumption 15W 6.15kg 4 x HDD15 inputs 400MHz -3dB video bandwidth 10 x stereo audio inputs 6 x YC or composite inputs Audio volume and master volume control The 2010 Integration Switcher combines switching of PC, computer, video and audio for presentation and conference rooms, home cinema, AV Rental Companies and any environment where a number of mixed source types need to be displayed. The 2010 features a total of ten inputs and a programmable serial output for controlling projectors, plasma displays and other display devices. There are 4 wide-band (350MHz -3dB) computer inputs on HDD15 connectors, six video inputs each of which can be set to composite or YC on BNCs and 10 stereo audio-follow-video/computer inputs on RCA/Cinch connectors each with volume control and memory. Full video and audio breakaway is available when controlling the 2010 by RS232. Programmable serial output Projector control Projector auto power ON/OFF Front panel and RS232 control 100-240V Internal power supply Control of the 2010 Integration Switcher can be from the front panel or by RS232 control from a computer or AV control system. The programmable serial output will control power on and off and switch the inputs of the projector or plasma. It is easily programmed from software supplied with the 2010. Projector control includes programmable RS232 commands for ON/OFF, RGB, YC and CV inputs. Baud rate, Data Bits, Stop Bit, Parity Checking, with each command string being up to 22 bytes. PC Windows based software procon catalogue 25

1113-05 PC and Audio Switcher 2 x 1 RGB Input Number 2 Connectors HDD15 socket Max Level 1V p-p Sync Input Level TTL/Analogue Max Level 5v p-p Audio Input Number 2 Connectors 3.5mm stereo socket Type Unbalanced analogue Max Level 2V p-p Impedance 47K ohm RGB Video Bandwidth 200MHz -3dB RGB Return Loss -45dB@10MHz, -27dB@100MHz Adjacent Input Crosstalk -73dB@10MHz, -50dB@100MHz Audio Response 20Hz-50KHz RGB Output Sync Output Level TTL Audio Output Type Balanced Unbalanced Impedance 600 ohm Control Manual, Auto, RS232 and contact Input Voltage 100-240V 50/60Hz Consumption 15W Dimensions (mm) w-115 h-30 d-53 0.65kg 2 PC inputs 2 Audio Inputs Balanced/unbalanced audio out Control options for Front panel, RS232, contact closure, auto-switching, priority switching The ProCon 1113-05 is the perfect solution for all 2 x 1 PC switching solutions. Designed for permanent installations and rental companies alike. The 1113 incorporates high resolution switching circuitry for all PC applications up to UXGA. The 1113 can be user set to operate in either manual, auto, or remote switching modes. The remote options include control from both RS232 and Contact Closure whilst Auto modes allow either priority or last presented input switching. Internal 100-240V power supply Driven RGB output for connection to long cable runs (up to 75m) Optional fixing brackets The outputs are both 75 ohm driven with TTL sync restore for connection to long cable runs. The audio inputs automatically follow the video input and are converted to be either balanced or unbalanced signals on the output. The 1113-05 includes it own internal 100-240V power supply. 1401-01 Dual Input PC Interface with Audio High resolution 250MHz RGB bandwidth (-3dB) Dual PC input with monitor loop Dual RGB output Manual, auto, RS232, and contact closure switch control The 1401-01 is a two input PC switcher with the added features of a computer video interface. Known as the 'Xtra 2' because of its additional input for laptop, visualiser or scaler. Switching between sources can be controlled from RS232, the front panel, auto switching with priority or via contact closure connection. Two simultaneous main outputs are available on both BNC and HDD15 connectors. The Internal 100-240V power supply Metal enclosure 5 year warranty outputs are both 75 ohm driven with TTL sync restore for connection to long cable runs. The audio inputs follow the video and are converted to balanced or unbalanced outputs. The 1401-01 also includes an internal worldwide power supply. RGB Input Connectors Level Max Level Impedance Sync Input Level Max Level Impedance Audio Input Type Max Level Impedance RGB Video Bandwidth Channel A Channel B Return Loss RGB Output Connectors Level Gain Impedance Sync Output Level Impedance Audio Output Type Impedance Control Switch HDD15 socket Analogue 1V p-p 75 ohm Analogue/TTL 5V p-p 470 ohm Unbalanced analogue 2V p-p 47K ohm 250MHz -3dB, 250MHz - 3dB RGB -45dB@10MHz, -32dB@100MHz 5 x BNC sockets, 1 x HDD15 socket Analogue Unity 75 ohm TTL 75 ohm Balanced/ unbalanced 600 ohm Contact closure, Auto-switch, Front panel RS232 100-240V 50/60Hz 5W Input Voltage Consumption Dimensions (mm) w-220 h-56 d-120 1.3kg 26 procon catalogue

1600-04 HDD15 and Audio Switcher 4 x 1 RGB Input Number 4 Connectors HDD15 socket Max Level 1V p-p Termination 75 ohm Sync Input /TTL Max Level 5V p-p Impedance 470 ohm Monitor Loop RGB Video Bandwidth 350MHz -3dB RGB Return Loss -45dB@10MHz, -32dB@100MHz RGB Output Connectors HDD15 Sync Output Level TTL Audio Output Balanced/ unbalanced Control RS232 and Front Panel Input Voltage 100-240V 50/60Hz Consumption 5W Dimensions (mm) w-202 h-60 d-120 1.5kg Optional Rack mount 3900-00 12V supply 350MHz (-3dB) video bandwidth 4 terminated input Audio follow video switching The ProCon 1600-04 is a wideband high resolution 4 x 1 HDD15 and Audio switcher for all computer presentation applications up to UXGA. The 1600 incorporates a driven output for connection to long cable runs. Control of the 1600-04 is from the front panel or via RS232. The 1600-04 will also output a black signal if a source is present on input 1. Balanced Audio Output Manual or RS232 control Optional rack mount The audio switcher will follow the video selected input and is stereo balanced or unbalanced. The 1600-04 is power by an external 12V power supply (supplied with the unit) and is housed in a metal enclosure. Optional 1U rack mounts are available. 1501-04 HDD15 and Audio Switcher 6 x 2 350MHz (-3dB) video bandwidth 6 terminated input 2 distributed outputs Audio follow video switching The ProCon 1501-04 is a wideband high resolution 6 x 2 HDD15 and Audio switcher for all computer presentation applications up to UXGA. The 1501 incorporates two simultaneously driven outputs for connection to long cable runs. Control of the 1501-03 is from the front panel, via RS232 or it can be set to operate in auto-switch mode which will switch the source to the last detected sync input. The 1501-04 Balanced Audio Output Manual, RS232 or auto switch modes 1U rack mount enclosure 100-240V internal power supply will also output a black signal if a source is present on input 1. The audio switcher will follow the video selected input and is stereo unbalanced to balanced out. The 1501-04 features an internal 100-240V power supply and is housed in a 1U metal enclosure. RGB Input Number 6 Max Level 1V p-p Sync Input Level TTL/Analogue Max Level 5v p-p Audio Input Number 6 Connectors 3.5mm stereo socket Type Unbalanced analogue Max Level 2V p-p Impedance 47K ohm RGB Video Bandwidth 350MHz -3dB RGB Return Loss -38dB@10MHz, -20dB@100MHz Adjacent Input Crosstalk -80dB@10MHz, -70dB@100MHz Audio Response 20Hz-50KHz RGB Output Number 2 (distributed) Sync Output Level TTL Audio Output Type Balanced/Unbalanced Impedance 600 ohm Control Switch RS232, Front Panel, Auto-Switch Rackmounting 1U included Input Voltage 100-240V 50/60Hz 12V to supply ProCon splitters via Pin 9 (1111-recommended) Consumption 15W Dimensions (mm) w-441 h-43, d-174 3.15kg procon catalogue 27

3805-03 Composite Video and Stereo Audio Switcher 5 x 1 Video Input Number 5 and 10 Connectors BNC Max Input 1V p-p Audio Input Number 5 and 10 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 47K Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz -22dB@5MHz Differential Phase 0.05% Differential Gain 0.03% Input Crosstalk -60dB@1MHz Video Output Number 1 -main output 1 - via expansion port Connectors BNC - main, 9-pin mini DIN secondary Audio Output Number 1 -main output 1 - via expansion port Attenuation 0-78dB Impedance 600 ohm Control Switch RS232 or Front panel Vertical interval switching for genlocked systems Connector RS232 and 4-pin rewireable Input Voltage 12V Consumption 2W Dimensions w-220 h-44 d-115 mm 3.15kg 3805-03 Version shown 5 and 10 way terminated BNC inputs 5 and 10 terminated RCA inputs Audio volume control Front panel control The 3805-03 and 3810-03 are 5 and 10 way composite analogue video and stereo unbalanced switchers. The video inputs are 75 ohm terminated and the outputs 75 ohm driven for connection to long cable runs. The audio inputs have 47K input termination and 600 ohm on the output. The ultra fast switching provides minimal disturbance to the picture when switching between sources and when used in conjunction with a genlocked system provides vertical interval switching. Volume control is available through either the front panel or via RS232. When used with RS232 the 3805 and 3810 RS232 control Vertical interval switching Secondary output remove the need for volume cards or controlling amplifier volumes as they can provide independent input levels and master volume control. The selected input is indicated by an LED on the front panel. A secondary expansion output is available for onward connection to another video switcher to provide more inputs. Housed in 1U metal enclosures the 3805 and 3810 are powered by an external 12V power supply. Models available 3805-03 Composite Video and Stereo Audio Switcher 5 x 1 3810-03 Composite Video and Stereo Audio Switcher 10 x 1 3505-03 Composite Video Switcher 5 x 1 3505-03 Version shown 5 and 10 terminated BNC inputs Front panel control RS232 control The 3505-03 and 3510-03 are 5 and 10 way composite analogue video switchers. All inputs are 75 ohm terminated and the outputs 75 ohm driven for connection to long cable runs. The ultra fast switching provides minimal disturbance to the picture when switching between sources and when used in conjunction with a genlocked system provides vertical interval switching. The 3505 and Models available 3505-03 Composite Video 5 x 1 3510-03 Composite Video 10 x 1 Vertical interval switching Secondary output Optional 1U mounting 3510 are front panel and RS232 controllable with LED indication on the front panel. A secondary expansion output is available for onward connection to another video switcher to provide more inputs. Housed in metal enclosures the 3505 and 3510 are powered by an external 12V power supply. Video Input Number 5 and 10 Connectors BNC Max Input 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz -22dB@5MHz Input Crosstalk -60dB@1MHz Video Output Number 1 -main output 1 - via expansion port Connectors BNC main, 9-pin mini DIN secondary Control RS232 or Front Panel Vertical interval switching For genlocked systems Connector RS232 and 4-pin rewireable Input Voltage 12V Consumption 1W Dimensions (mm) w-220 h-44 d-115 1.5kg Optional Rack mount 3900-00 12V supply 28 procon catalogue

3705-03 S-Video Switcher 5 x 1 Video Input Number 5 and 10 Connectors 4-pin mini DIN Max Input 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase Error 0.05% Differential Gain Error 0.03% Video Output Number 1 -main output, 1 - via expansion port Connectors 4-pin Mini DIN- main, 9-pin mini DIN secondary Control Switch RS232 or Front panel Vertical interval switching for genlocked systems Connector RS232 and 4-pin rewireable Input Voltage 12V Consumption 1W Dimensions (mm) w-220 h-44 1U d-115 1.5kg 3705-03 Version shown 5 and 10 terminated 4-pin Mini DIN inputs Front panel control RS232 control The 3705-03 and 3710-03 are 5 and 10 way s-video YC switchers. All inputs are 75 ohm terminated and the outputs 75 ohm driven for connection to long cable runs. The ultra fast switching provides minimal disturbance to the picture when switching between sources and when used in conjunction with a genlocked system provides vertical interval switching. The 3705 and 3710 are front panel and Vertical interval switching Secondary output Optional 1U mounting RS232 controllable with LED indication on the front panel. A secondary expansion output is available for onward connection to another video switcher to provide more inputs. Housed in metal enclosures the 3705 and 3710 are powered by an external 12V power supply. Optional Rack mount 3900-00 12V supply Models available 3705-03 S-Video Switcher 5 x 1 3710-03 S-Video Switcher 10 x 1 3605-03 Stereo Audio Switcher with Volume Control 5 x 1 3605-03 Version shown 5 and 10 terminated RCA inputs Front panel control RS232 control with RX and TX The 3605-03 and 3610-03 are 5 and 10 way stereo unbalanced audio switchers. All inputs are 47K ohm terminated and the outputs 600 ohm driven for connection to long cable runs. Volume control is available through either the front panel or via RS232. When used with RS232 the 3605 and 3610 remove the need for volume cards or controlling amplifier volumes as they can provide independent input levels and master volume control. The selected input Audio volume control Secondary output Optional 1U mounting is indicated by an LED on the front panel. A secondary expansion output is available for onward connection to another video switcher to provide more inputs. Housed in metal enclosures the 3605 and 3610 switchers are powered by an external 12V power supply. Audio Input Connectors RCA socket Level Stereo unbalanced analogue Max Input 2V p-p Impedance 47K Audio Response 20Hz-50KHz S/N Ratio 95dB Input Crosstalk 80dB@1KHz Audio Output Number 1 -main output, 1 - via expansion port Connectors RCA - main, 9-pin mini DIN secondary Attenuation 0-78dB Impedance 600 ohm Control Switch RS232 or Front panel Connector RS232 and 4-pin rewireable Input Voltage 12V Consumption 1W Dimensions(mm) w-220 h-44 1U d-115 1.5kg Optional Rack mount 3900-00 12V supply Models available 3605-03 Stereo Audio Switcher with Volume Control 5 x 1 3610-03 Stereo Audio Switcher with Volume Control 10 x 1 procon catalogue 29

7500-03 Composite Video Matrix 8 x 8 Video Input Number 8 Connectors BNC Max Input 1V p-p Video Bandwidth 30MHz -3dB Video Return Loss -25dB@1MHz, -17dB@5MHz Input Crosstalk -60dB@1MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 8 Connectors BNC Control Switch RS232 or Front panel Vertical interval switching for genlocked systems Input Voltage 100-240V 50/60Hz Consumption 8W Dimensions (mm) w-441 h-44 1U d-182 3.1kg 8 terminated BNC inputs 8 driven BNC outputs Front panel control The ProCon 7500-03 composite video matrix has 8 inputs and 8 outputs. Any input can be assigned to any one or multiple outputs and of course all inputs and outputs may be active simultaneously. The 7500 matrix can be controlled either from the front panel or via RS232 from a PC or control system. When used with genlocked systems the 7500 provides vertical interval switching for seamless transitions between sources. RS232 control Vertical interval switching 1U rack mounting The 7500 video matrix is ideal for studio, video conferencing, home automation, presentation, leisure and rental applications. The 7500-03 video matrix is housed in a metal 1U enclosure and has a built-in 100-240 power supply. 7540-03 S-Video Matrix 4 x 4 4 terminated BNC inputs 4 driven BNC outputs Front panel control The ProCon 7540-03 s-video BNC matrix has 4 inputs and 4 outputs. Any input can be assigned to any one or multiple outputs and of course all inputs and outputs may be active simultaneously. The 7540 matrix can be controlled either from the front panel or via RS232 from a pc or control system. When used with genlocked systems the 7540 provides vertical interval switching for seamless transitions between sources. RS232 control Vertical interval switching 1U rack mounting The 7540 video matrix is ideal for studio, video conferencing, home automation, presentation, leisure and rental applications. For larger systems requiring 8 inputs and 8 outputs two 7500 composite video matrix switchers may be used. The 7540-03 video matrix is housed in a metal 1U enclosure and has a built-in 100-240 power supply. Video Input Number 4 Connectors BNC Max Input 1V p-p Video Bandwidth 30MHz -3dB Video Return Loss -25dB@1MHz, -17dB@5MHz Input Crosstalk -60dB@1MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 4 Connectors BNC Control Switch RS232 or Front panel Vertical interval switching for genlocked systems Input Voltage 100-240V 50/60Hz Consumption 8W Dimensions (mm) w-441 h-44 1U d-182 3.1kg 30 procon catalogue

7600-03 Stereo Audio Matrix 8 x 8 Audio Input Number 8 Connectors RCA phono Type Stereo unbalanced analogue Max Input 2V p-p Impedance 47K Audio Response 20Hz-50KHz Audio Output Number 8 Connectors RCA phono Type Stereo unbalanced analogue Impedance 600 ohm Control Switch RS232 or Front panel Rackmountable Yes Input Voltage 100-240V 50/60Hz Consumption 20W Dimensions (mm) w-441 h-44 1U d-182 3.05kg 8 terminated RCA inputs 8 driven RCA outputs Front panel control RS232 control Silent switching The ProCon 7600-03 stereo unbalanced audio matrix has 8 inputs and 8 outputs. Any input can be assigned to any one or multiple outputs and of course all inputs and outputs may be active simultaneously. The 7600 matrix can be controlled either from the front panel or via RS232 from a pc or control system. The 7600 audio matrix is ideal for studio, video conferencing, home automation, presentation, leisure and rental applications. The 7600-03 video matrix is housed in a metal 1U enclosure and has a built-in 100-240 power supply. 7700-03 Composite Video and Stereo Audio Matrix 8 x 8 8 Video terminated BNC inputs 8 Video driven BNC outputs 8 Audio terminated RCA phono inputs 8 Audio driven RCA phono outputs The ProCon 7700-03 composite video and stereo unbalanced audio matrix has 8 inputs and 8 outputs. Any input can be assigned to any one or multiple outputs and of course all inputs and outputs may be active simultaneously. The 7700 matrix can be controlled either from the front panel or via RS232 from a pc or control system. Switching between sources can be selected to be audio-follow-video, video only or audio only to allow full breakaway and assignment of signals. When used with genlocked Front panel display Front panel control RS232 control Vertical interval switching 2U rack mounting systems the 7700 provides vertical interval switching for seamless transitions between sources. The 7700 video matrix is ideal for studio, video conferencing, home automation, presentation, leisure and rental applications. The 7700-03 video matrix is housed in a metal 2U enclosure, with front panel status display and has a built-in 100-240 power supply. Video Input Number 8 Connectors BNC Max Input 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz, -22dB@5MHz Input Crosstalk -60dB@1MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Audio Input Number 8 Connectors RCA Type Stereo unbalanced analogue Max Input 2V p-p Impedance 47K ohm Audio Response 20Hz-50KHz Video Output Number 8 Connectors BNC Audio Output Number 8 Connectors RCA Type Stereo unbalanced analogue Impedance 600 ohm Control Switch RS232 or Front panel Vertical interval switching for genlocked systems Input Voltage 100-240V 50/60Hz Consumption 30W Dimensions (mm) w-441 h-88 2U d-182 6.05kg procon catalogue 31

7000 Series RGB HV Universal Matrix RGB Inputs 7042-01 4 7062-01 6 7082-01 8 7044-01 4 7064-01 6 7084-01 8 7088-01 8 Connectors BNC Max Input 1V p-p Sync Input /TTL Max Level 5V p-p RGB Bandwidth 400MHz -3dB RGB Return Loss -40dB@10MHz, -24dB@100MHz Adjacent Input Crosstalk-78dB@10MHz, -70dB@100MHz RGB Output 7042-01 2 7062-01 2 7082-01 2 7044-01 4 7064-01 4 7084-01 4 7088-01 8 Sync Output Control Switch RS232 or Front panel Vertical interval switching for genlocked systems RGB Delay 0-9 sec for each input Instant (single) and Preset (Cue) switch modes Connector 3-pin rewireable Rackmountable 3U Input Voltage 100-240V 50/60Hz Consumption 50W max Dimensions (mm) w-447 h-132 3U d-285 7.93kg max SORRY NOW DISCONTINUED NEW RANGE AVAILABLE 2007 7000-01 Version shown Terminated BNC inputs Driven BNC outputs 400MHz -3dB video bandwidth RGB and Sync delay switch Front panel control The ProCon 7000 series universal RGB ultra-wide bandwidth matrix switchers are the perfect solution for high resolutions presentation applications. As a true matrix the 7000 series can take any input to one or multiple outputs and of course this can apply to one or more inputs simultaneously. There are 7 standard configurations available in the range, however ProCon can offer any custom combination for up to 8 inputs by 8 outputs. The 7000 series RGB matrices include front panel and RS232 control with front panel status display. Switching can be set to either instant, one input to one output, or preset, multiple inputs to multiple outputs, and triggered by the Cue button on the front panel. RGB HV, RGBS, RGsB, YUV, S-Video and Composite Video alike can all be switched through the state-ofthe-art switching circuitry which includes vertical interval and RGB delayed switching. RS232 control Vertical interval switching Control output to audio switch or matrix 3U rack mounting The 7000 series Matrices include an internal 100-240V power supply and are house in a rugged 3U metal enclosure. As with all ProCon products the RS232 is bi-directional and has 16 address settings. The RS232 can easily be looped through the matrix from a control system on to other devices within the system. A downloadable PC based control programme is available from our web site www.procon.co.uk for this and other products within our range of switcher and matrices. ProCon also has a range of audio switchers with volume control or an audio 8 x 8 matrix switcher depending on the application, as well as control panels for simple remote operation. Model options 7042-01 4 x 2 Universal Matrix 7062-01 6 x 2 Universal Matrix 7082-01 8 x 2 Universal Matrix 7044-01 4 x 4 Universal Matrix 7064-01 6 x 4 Universal Matrix 7084-01 8 x 4 Universal Matrix 7088-01 8 x 8 Universal Matrix 32 procon catalogue

distribution amplifiers 1200-01 PC 1 x 2 1101-02 PC 1 x 2 with Audio 3403-01 RGBHV 1 x 3 4516-01 RGBHV 1 x 6 3404-01 PC 1 x 4 4616-01 PC 1 x 6 2813-01 Video and Audio 1 x 3 2913-01 S-Video and Audio 1 x 3 3815-01 Video and Audio 1 x 5 3820-01 Video and Audio 1 x 10 2513-01 Video 1 x 3 2523-01 Video 1 x 3 3515-01 Video 1 x 5 3520-01 Video 1 x 10 2713-01 S-Video 1 x 3 3715-01 S-Video 1 x 5 3720-01 S-Video 1 x 10 3615-01 Audio 1 x 5 3620-01 Audio 1 x 10 procon catalogue 33

1200-01 PC Distribution Amplifier 1 x 2 RGB Input Connector Level Max Level Impedance Sync Input Type Impedance RGB Video Bandwidth RGB Return Loss HDD15 socket Analogue 1V p-p 75 ohm Analogue/TTL 470 ohm 350MHz -3dB -45dB@10MHz, -27dB@100MHz Sync Processing TTL restore RGB Output Number 2 Connector HDD15 socket Sync Output Level TTL Input Voltage 12V Consumption 3W Dimensions w-115 h-30 d-54 280g 12V supply 1 x 2 PC distribution amplifier 350MHz video bandwidth (-3dB) Designed for connection to long cable runs TTL Sync restore The 1200-01 is a high bandwidth, high resolution 1 x 2 VGA through to UXGA distribution amplifier. With a video bandwidth in excess of 350MHz the 1200 is the ideal choice for all presentation applications. The 1200 incorporates buffered outputs to ensure signal integrity when distributing data and Compatible with all VGA/SVGA/XGA/SXGA and UXGA Metal enclosure 5 year warranty video to projectors, monitors and plasma displays. The 1200 comes complete with an external 12V power supply. Signal and picture quality can be further maintained over long distances by using true high quality VGA cable. 1101-02 PC Splitter with Audio and Internal Supply 350MHz (-3dB) RGB video bandwidth Buffered input splits signal to local monitor and main output Designed for connection to long cable runs (up to 75m) The ProCon 1101-02 is a high resolution wideband PC Splitter with exceptional characteristics and features second to none. With an RGB video bandwidth in excess of 350Mhz (-3dB) the 1101 is the perfect choice for all presentation applications. The buffered input provides for a local monitor loop through and main output for onward connection to monitors, projectors and plasma displays. The main Internal 100-240V power supply Metal enclosure 5 year warranty output features 75 ohm drive for connection to long cable runs and TTL Sync restore for total compatibility. The 1101-02 incorporates an internal worldwide power supply and the audio input is converted to provide either balanced or unbalanced outputs. RGB Input Connector Level Max Level Impedance Sync Input Type Impedance RGB Video Bandwidth RGB Return Loss HDD15 socket Analogue 1V p-p 75 ohm Analogue /TTL 470 ohm 350MHz -3dB -45dB@10MHz, -27dB@100MHz Sync Processing TTL restore RGB Output Connectors HDD15 socket Sync Output Level TTL Audio Output Balanced/ unbalanced Control Monitor ID bits Input Voltage 100-240V 50/60Hz Consumption 3W Dimensions (mm) w-115 h-30 d-54 650g Optional Bracket 3913-00 34 procon catalogue

3403-01 RGB HV BNC Distribution Amplifier 1 x 3 RGB Input Number 1 Connector BNC socket Max Level 1V p-p Sync Input Type Analogue/TTL RGB Video Bandwidth 350MHz -3dB RGB Return Loss -45dB@10MHz, -28dB@100MHz Adjacent Channel X-talk -70db@10MHz, -50dB@100MHz RGB Output Number 3 Connectors BNC Sync Output Level TTL Input Voltage 12V Consumption 8W Dimensions(mm) w-224 h-43 1U d-115 1.5kg Optional Rack mount 3900-00 12V supply Terminated input 350MHz -3dB video bandwidth 3 buffered outputs This RGB HV BNC distribution amplifier is a high quality wide bandwidth distribution amplifier. With a video bandwidth in excess of 350MHz (-3dB) the 340-01 is suitable for all RGB HV, RGBS, RGsB and YUV type signals and can be used as a composite video distribution amplifier. The terminated inputs and 75 ohm driven outputs make the 3403-01 ideal Designed for connection to long cable runs Optional 1U rack mounting 12V power supply included for connection to long cable runs. The 3403 is housed in a metal enclosure and is powered by the supplied external 12V power adaptor. The 3403-01 can be rack mounted with the optional 3900-00 adaptor. 4516-01 RGB HV BNC Distribution Amplifier 1 x 6 Terminated input 350MHz -3dB video bandwidth 6 buffered outputs The ProCon 4516-01 is a 1 in 6 out RGB HV distribution amplifier on BNC connectors. All outputs are 75 ohm driven for connection to long cable runs. The high performance wide bandwidth circuitry ensures compatibility across all resolutions and the Designed for connection to long cable runs 1U rack mounting Internal universal power supply 4516 can be used for RGB HV, RGBS, RGsB, YUV, and composite video. The 4516 is housed in a 1U metal enclosure and features an internal 100-240V power supply. RGB Input Connector Level Max Level Impedance Sync Input Type Impedance RGB Video Bandwidth RGB Return Loss BNC Analogue 1V p-p 75 ohm Analogue or TTL 75 ohm 350MHz -3dB -40dB@10MHz, -27dB@100MHz Adjacent Channel X-talk -70dB@10MHz, -48dB@100MHz RGB Output Number 6 Connectors BNC Sync Output Input Voltage 100-240V 50/60Hz Consumption 8W Dimensions (mm) w-441 h-44 1U d-170 2.6kg procon catalogue 35

3404-01 RGB HV HD-D15 Distribution Amplifier 1 x 4 RGB Input Connector Level Max Level Impedance Sync Input Type Impedance RGB Video Bandwidth RGB Return Loss HDD15 socket Analogue 1V p-p 75 ohm Analogue/TTL 75 ohm 350MHz -3dB -45dB@10MHz, -27dB@100MHz RGB Output Number 4 Connectors HDD15 socket Sync Output Level TTL Gain TTL restore Input Voltage 12V Consumption 8W Dimensions (mm) w-224 h-43 1U d-115 (mm) 1.5kg Optional Rack mount 3900-00 12V supply Terminated input 350MHz -3dB video bandwidth 4 buffered outputs TTL sync restore This RGB HV HDD15 distribution amplifier is a high quality wide bandwidth distribution amplifier. With a video bandwidth in excess of 350MHz (-3dB) the 3404-01 is suitable for all RGB HV, RGBS, RGsB and YUV type signals The terminated inputs and 75 ohm driven outputs make the 3404-01 ideal for Designed for connection to long cable runs Optional rack mounting 12V power supply included connection to long cable runs. The 3404 is housed in a metal enclosure and is powered by the supplied external 12V power adaptor. The 3404-01 can be rack mounted with the optional 3900-00 adaptor. 4616-01 RGB HV HD-D15 Distribution Amplifier 1 x 6 Terminated input 350MHz -3dB video bandwidth 6 buffered outputs TTL sync restore The ProCon 4616-01 is a 1 in 6 out RGB HV distribution amplifier on HDD15 connectors. All outputs are 75 ohm driven for connection to long cable runs and the unit also has TTL sync restore for compatibility with all display devices. Output 1 of the 4616 can be used as a local monitor output and also includes monitor ident line resolution switching. The high performance wide Designed for connection to long cable runs 1U rack mounting Internal universal power supply bandwidth circuitry ensures compatibility across all resolutions and the 4616 can be used for RGB HV, RGBS, RGsB and YUV. The 4616 is housed in a 1U metal enclosure and features a 100-240V internal power supply. RGB Input Number 1 Connector HDD15 socket Max Level 1V p-p Sync Input Type Analogue or TTL RGB Video Bandwidth 350MHz -3dB RGB Return Loss -45dB@10MHz, -27dB@100MHz Sync Processing None RGB Output Number 6 Connectors HDD15 socket Sync Output Level TTL Gain TTL restore Control Monitor ID bits Input Voltage 100-240V 50/60Hz Consumption 3W Dimensions (mm) w-441 h-44 1U d-170 2.6kg 36 procon catalogue

Video Input Number 1 Connectors BNC Max Input 1V p-p Audio Input Number 1 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 47K Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase 0.05% Differential Gain 0.03% Input Crosstalk -60dB@1MHz Video Output Number 3 Max Input 1V p-p Audio Output Number 3 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 600 ohm Rack Mountable No Input Voltage 12V DC Consumption 2W Dimensions w-216 h-38 d-70 mm 0.55kg 2813-01 Terminated inputs Compact design Designed for connection to long cable runs 12V power The 2813-01 is a 1 x 3 composite video and stereo audio distribution amplifier. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. The 2813-01 distribution amplifier is Composite Video and Audio Distribution Amplifier 1 x 3 designed for connection to long cable with 75 ohm driven outputs. These distribution amplifiers are housed in robust metal enclosures and include an external 12V power supply. 12V supply 2913-01 S - Video and Audio Distribution Amplifier 1 x 3 Terminated inputs Compact design Designed for connection to long cable runs 12V power The 2913-01 is a 1 x 3 S-video and stereo audio distribution amplifier. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. The 2913-01 distribution amplifier is designed for connection to long cable with 75 ohm driven outputs. These distribution amplifiers are housed in robust metal enclosures and include an external 12V power supply. Video Input Number 1 Connectors 4 pin Mini Din Max Input 1V p-p Audio Input Number 1 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 47K Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase 0.05% Differential Gain 0.03% Input Crosstalk -60dB@1MHz Video Output Number 3 Max Input 1V p-p Audio Output Number 3 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 600 ohm Rack Mountable No Input Voltage 12V DC Consumption 2W Dimensions w-216 h-38 d-70 mm 0.55kg 12V supply procon catalogue 37

Video Input Connectors BNC Max Input 1V p-p Audio Input Number 1 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 47K Video Bandwidth 50MHz -3dB Video Return Loss -30dB@1MHz, -22dB@5MHz Differential Phase 0.05% Differential Gain 0.03% Input Crosstalk -60dB@1MHz Video Output Number 5 and 10 Max Input 1V p-p Audio Output Number 5 and 10 Connectors RCA Type Stereo unbalanced analogue Max Level 2V p-p Impedance 600 ohm Input Voltage 100-240V 50/60Hz Consumption 2W Dimensions w-441 h-44 d-115 mm 2.75kg 3815-01 3815-01 Version shown Terminated input 5 or 10 way version Internal power supply The 3815-01 and 3820-01 are 1 x 5 and 1 x 10 composite video and stereo audio distribution amplifiers. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. The 3815 and 3820 distribution amplifiers are designed for connection Models Available: 3815-01 Composite Video and Audio Distribution Amplifier 1 x 5 3820-01 Composite Video and Audio Distribution Amplifier 1 x 10 Composite Video and Audio Distribution Amplifier 1 x 5 1U rack case Designed for connection to long cable runs to long cable runs with 75 ohm driven outputs. These distribution amplifiers are housed in 1U metal enclosures and include an internal 100-240V power supply. 2513-01 Composite Video BNC Distribution Amplifier 1 x 3 1 x 3 distribution amplifier Terminated input BNC connectors 75 ohm driven outputs Metal enclosure 5 year warranty Video Input Number 1 Connector BNC Max Level 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -25dB@1MHz, -17dB@5MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 3 Connectors BNC Input Voltage 12V Connector 2.1mm DC plug Consumption 1W Dimensions (mm) w-113 h-33 d-64 320g The 2513-01 is a high bandwidth 1 x 3 composite analogue video distribution amplifier for studio use and other demanding applications. The 2513 splits the signal from one input source to three identical outputs without degradation. The inputs and outputs are AC coupled for total compatibility and flexibility. to the 2513 is via an external 12V power supply that comes with the unit. Housed in a compact metal enclosure the 2513 is ideal for installation and field work. 12V supply 38 procon catalogue

2523-01 Composite Video RCA Phono Distribution Amplifier 1 x 3 Video Input Number 1 Connector RCA Phono Max Level 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -25dB@1MHz, -17dB@5MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 3 Connectors BNC Input Voltage 12V Connector 2.1mm DC plug Consumption 1W Dimensions (mm) w-113 h-33 d-64 320g 1 x 3 distribution amplifier Terminated input RCA Phono connectors 75 ohm driven outputs Metal enclosure 5 year warranty 12V supply The 2523-01 is a high bandwidth 1 x 3 composite analogue video distribution amplifier for studio use and other demanding applications. The 2523 splits the signal from one input source to three identical outputs without degradation. The inputs and outputs are AC coupled for total compatibility and flexibility. to the 2523 is via an external 12V power supply that comes with the unit. Housed in a compact metal enclosure the 2523 is ideal for installation and field work. 3515-01 Composite Video Distribution Amplifier 1 x 5 3515-01 Version shown Terminated input 5 and 10 way versions 75 ohm driven outputs The 3515-01 and 3520-01 are 1 x 5 and 1 x 10 composite video distribution amplifiers. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. The 3515 and 3520 distribution amplifiers are designed for connection to long cable with 75 ohm driven outputs. Models Available: 3515-01 Composite Video Distribution Amplifier 1 x 5 3520-01 Composite Video Distribution Amplifier 1 x 10 Optional 1U rack mounting 12V power supply included These distribution amplifiers are housed in metal enclosures and are powered by external 12V supply included with the units. An optional 1U rack mount (3900-00) is also available. Video Input Connector Level Max Level Impedance Video Bandwidth Video Return Loss BNC Analogue 1V p-p 75 ohm 30MHz -3dB -25dB@1MHz, -17dB@5MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 5 and 10 Connectors BNC Input Voltage 12V unregulated (psu included) Connector 2-pin rewireable Consumption 1W Dimensions (mm) w-224 h-44 1U d-115 1.5kg 12V supply Optional Rack Mount 3900-00 procon catalogue 39

2713-01 S-Video 4 pin Distribution Amplifier 1 x 3 Video Input Number 1 Connector 4-pin Mini DIN Max Level 1V p-p Video Bandwidth 50MHz -3dB Video Return Loss -25dB@1MHz, -17dB@5MHz Differential Phase Error 0.15% Differential Gain Error 0.15% Video Output Number 3 Connectors BNC Input Voltage 12V Connector 2.1mm DC plug Consumption 1W Dimensions (mm) w-113 h-33 1U d-64 320g 1 x 3 distribution amplifier Terminated input 4-pin Mini DIN connectors 75 ohm driven outputs Metal enclosure 5 year warranty 12V supply The 2713-01 is a high bandwidth 1 x 3 YC analogue video distribution amplifier for studio use and other demanding applications. The 2713 splits the signal from one input source to three identical outputs without degradation. The inputs and outputs are AC coupled for total compatibility and flexibility. to the 2713 is via an external 12V power supply that comes with the unit. Housed in a compact metal enclosure the 2713 is ideal for installation and field work. 3715-01 S-Video 4 pin Distribution Amplifier 1 x 5 3715-01 Version shown Terminated input 5 and 10 driven outputs The 3715-01 and 3720-01 are 1 x 5 and 1 x 10 s-video YC distribution amplifiers. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. The 3715 and 3720 distribution amplifiers are designed for connection to long cable with 75 ohm driven outputs Models Available: 3715-01 S-Video Distribution Amplifier 1 x 5 3720-01 S-Video Distribution Amplifier 1 x 10 Optional rack mounting 12V power supply included These distribution amplifiers are housed in metal enclosures and are powered by external 12V supply included with the units. An option 1U rack mount (3900-00) is also available. S-Video Input Connector Level Max Level Impedance Video Bandwidth Video Return Loss 4-pin mini DIN Analogue 1V p-p 75 ohm 30MHz -3dB -25dB@10MHz, -17dB@100MHz Differential Phase Error 0.15% Differential Gain Error 0.15% S-Video Output Number 5 and 10 Connectors 4-pin mini DIN Input Voltage 12V unregulated Consumption 1W Dimensions (mm) w-224 h-43 1U d-115 1.5kg 12V supply Optional Rack Mount 3900-00 40 procon catalogue

3615-01 Stereo Audio Distribution Amplifier 1 x 5 Audio Input Number 1 Connector RCA Phono Type Stereo unbalanced analogue Max Level 2V p-p Impedance 47K Frequency Response 20Hz-50KHz Audio Output Number 5 and 10 Connectors RCA Phono Type Stereo unbalanced analogue Impedance 600 ohm Input Voltage 12V unregulated Consumption 3W Dimensions (mm) w-224 h-43 1U d-115 1.5kg 3615-01 Version shown Terminated RCA input 5 and 10 active outputs Optional rack mount kit 12V power supply included 12V supply Optional Rack Mount 3900-00 The 3615-01 and 3620-01 are 1 x 5 and 1 x 10 stereo unbalanced distribution amplifiers. The high quality amplification circuitry allows identical signals on each output and with no degradation from the input. These distribution amplifiers are housed in metal enclosures and are powered by external 12V supply included with the units. An option 1U rack mount (3900-00) is also available. Models Available: 3615-01 Stereo Audio Distribution Amplifier 1 x 5 3620-10 Stereo Audio Distribution Amplifier 1 x 10 procon catalogue 41

Connectors 2 x Male XLR 2 x RCA Phono Bi-directional Unbalanced in to balanced out Balanced in to unbalanced out Isolation Audio Transformer Impedance Input 800 ohms Output 800 ohms Frequency Response 60-25KHz Dimensions w-110 h-40 d-50 8050-01 Bi-directional Stereo Audio Balancing/Unbalancing Isolation Unit Unbalanced input to balanced output Balanced input to unbalanced output. The ProCon 8050-01 is a versatile bi-directional stereo audio balancing and unbalancing unit with audio isolation. Ideally suited to permanent installations and rental applications alike the 8050 is a passive device requiring no power. XLRs are provided for the balanced input or output while RCA audio isolation Fixing holes for easy mounting phono connectors are available for the unbalanced input or output. The 8050 is housed in a metal enclosure which has built-in fixing holes for easy mounting. 1155-01 XGA and Audio Module Adaptor HDD15 PC and 3.5mm Audio sockets to screw-terminal connections module. Can be easily panel mounted and provides the ideal solution to fast reliable cable interconnections. stop press SPECIFICATION Input Connections PC PC Audio Video Audio USB Output Connections PC PC Audio Video Audio USB 1 x HDD15 1 x 3.5mm Stereo 1 x RCA Yellow 2 x RCA White/Red Type B Screw Terminals Screw Terminals Solder Bucket Solder Bucket Type A 1313-01 Input Plate Models available 1313-01 A UK Brushed silvered aluminium 1313-01 W UK White PC and Audio with AV and USB connectors White or brushed silver aluminium finish These quick and easy to install wall input plates is designed for fitting into standard UK single gang back boxes. With a choice of either white or brushed silver aluminium finish, the passive wall connections Fits UK + DIN single gang back box provide the simple solution for many different configurations. The PC and Audio Input are terminated onto screw terminals to reduce the need for complicated on-site soldering. 42 procon catalogue

3900 Series Fixing Hardware 3900-00 Rack mount kit 3901-00 Panel mounting kit 3903-00 Surface fixing bracket 3908-00 Double gang white surface moulded box 3909-00 Double gang flush mounting box 3910-00 Double gang partition wall box 3913-00 Fixing bracket (1101-01 and 1113-05) 3915-00 16 Button control panel surface white mounting box 3916-00 16 Button control panel partition wall fixing procon catalogue 43

RS 232 control data Serial RS 232 Protocol and Control Codes Baud Rate 9600 Data Bits 8 Stop Bits 1 Parity None Download Serial Test Programs for all our products from www.procon.co.uk/support Product Header Address Byte 3 Byte 4 Byte 5 1113-05 1401-01 FE 00 0A (Input A) FE 00 0B (Input B) 1501-03 FC 00-0F 00-06 (Input) 1502-03 FC 00-0F 00-05 (Input) 1600-04 E8 00-0F 00-04 (Input) 2010-03 E8 00-0F 01-04 (PC Input) 00-0A (Audio) 05-0A (Video Input) IF=No Change IF=No Change E8 00-0F 10 (Master Volume level increases 0.5dB) E8 00-0F 20 (Master Volume level decreases 0.5dB) E8 00-0F 0D (Input Volume increase 0.5dB) E8 00-0F 0E (Input Volume decrease 0.5dB) E8 00-0F 0F 00 to 7F (= 128 volume levels with 00 as the loudest 0dB) E8 00-0F 0B (Mute On) E8 00-0F 0C (Mute Off) 3505-03 3510-03 E8 00-0F 00-0A (Input) 3605-03 3610-03 E8 00-0F FF (Fade) 00-1F (Attenuation) 00-0A (Input) 00 (Cut) E8 00-0F E1 (Master Volume increases 0.5dB) E8 00-0F E0 (Master Volume decreases 0.5dB) E8 00-0F C9 00 to 7F (128 volume levels with 00 as the loudest 0dB) E8 00-0F DF (Mute Toggle) 3705-03 3710-03 E8 00-0F 00-0A (Input) 3805-03 3810-03 E8 00-0F FF (Fade) 00-1F (Attenuation) 00-0A (Input) 00 (Cut) E8 00-0F E1 (Master Volume increases 0.5dB) E8 00-0F E0 (Master Volume decreases 0.5dB) E8 00-0F C9 00 to 7F (128 volume levels with 00 as the loudest 0dB) E8 00-0F DF (Mute Toggle) 7000-01 EE 00-0F 01-08 (Output) 00-08 (Input) F7 (Cue) 7100-01 EE 00-0F 01 00-08 (Input) 7500-03 EF 00-0F 01-08 (Output) 00-08 (Input) 7540-03 EF 00-0F 01-04 (Output) 00-08 (Input) 7600-03 EF 00-0F 01-08 (Output) 00-08 (Input) 7700-03 EF 00-0F 01-08 (Output) 00-08 (Input) EF 00-0F 09 (AV Mode) EF 00-0F 0A (Video Mode) EF 00-0F 0B (Audio Mode) 8200-03 F3 00-0F 00 (Off) 01-08 (Relay) FF (On) 01-0F (momentary time on X 250ms) 44 procon catalogue

Product Header Address Byte 3 Byte 4 Byte 5 8210-03 F3 00-0F 00 (Off) 01-03 FF (On) 01-0F (momentary time on X 250ms) 8300-03 E3 00-0F X (Reference) 01 to 06 (Port) 01 to 78 (Pulses) E3 00-0F X (Reference) 01 to 06 (Port) 80 (Continuous) E3 00-0F FF (Stop) 8404-03 With feedback Command 1-Button Activated-Acknowledge EC(h) Sent-Script Performed-F0 17 20(h) Sent-Command 2 8406-03 Without feedback Command 1-Button Activated-Delay until Script finished-command 2 8408-03 8416-03 Button No 1st Command 2nd Command 1 F2h 09h 81h 10h 01h F2h 09h 81h 01h 2 F2h 09h 81h 11h 02h F2h 09h 81h 02h 3 F2h 09h 81h 12h 03h F2h 09h 81h 03h 4 F2h 09h 81h 13h 04h F2h 09h 81h 04h 5 F2h 09h 81h 14h 05h F2h 09h 81h 05h 6 F2h 09h 81h 15h 06h F2h 09h 81h 06h 7 F2h 09h 81h 16h 07h F2h 09h 81h 07h 8 F2h 09h 81h 17h 08h F2h 09h 81h 08h 9 F2h 09h 81h 20h 09h F2h 09h 81h 09h 10 F2h 09h 81h 21h 0Ah F2h 09h 81h 0Ah 11 F2h 09h 81h 22h 0Bh F2h 09h 81h 0Bh 12 F2h 09h 81h 23h 0Ch F2h 09h 81h 0Ch 13 F2h 09h 81h 24h 0Dh F2h 09h 81h 0Dh 14 F2h 09h 81h 25h 0Eh F2h 09h 81h 0Eh 15 F2h 09h 81h 26h 0Fh F2h 09h 81h 0Fh 16 F2h 09h 81h 27h 10h F2h 09h 81h 10h 17 F2h 09h 81h 40h 11h F2h 09h 81h 11h 18 F2h 09h 81h 41h 12h F2h 09h 81h 12h 19 F2h 09h 81h 42h 13h F2h 09h 81h 13h 20 F2h 09h 81h 43h 14h F2h 09h 81h 14h 21 F2h 09h 81h 44h 15h F2h 09h 81h 15h 22 F2h 09h 81h 45h 16h F2h 09h 81h 16h 23 F2h 09h 81h 46h 17h F2h 09h 81h 17h 24 F2h 09h 81h 47h 18h F2h 09h 81h 18h 8450-02 8455-02 8460-02 8465-02 Clock 1 Start 9F 49 01 01 Clock 1 Stop 9F 49 01 02 Clock 1 Reset 9F 49 01 04 Clock 2 Start 9F 49 01 08 Clock 2 Stop 9F 49 01 10 Clock 2 Reset 9F 49 01 20 All numbers are in hex. 00 for input is Blank or Mute. All products (except 1113-05 and 1401-01) are bi-directional, for full serial command codes and use please refer to product manuals or the website www.procon.co.uk Serial Connections D9 D9 Hitachi 8 Pin Mini DIN 8 Pin Mini DIN 8 Pin Mini DIN 8 Pin Mini DIN Plug HDD15 Sanyo/Christie NEC Sharp Elmo Transmit 2 3 14 6 7 3 3 Receive 3 2 13 1 1 2 5 Ground 5 5 6/7/10 4 4 5 6 Epson Handshake - Apply 12V to Pin 6 + D9 procon catalogue 45

case studies Our products are working in thousands of real applications everyday, for more information visit our website www.procon.co.uk/casestudies and see how ProCon can provide the solution for you. Warwick University currently have in excess of 40 ProCon 8416 16 Button Control Panels and 2010 Integration Switchers systems in their smaller teaching rooms. Here s what they say about us. The ProCon products have performed reliably, successfully and repeatedly for four years. I also like the fact that I can go to ProCon with challenges that I have, and they are prepared to listen and make product developments to help me. Daniel Bell, Team Leader Audio Visual Services, University of Warwick A recent example demonstrating the flexibility of our Control Panels was when we were asked to provide a solution for following scenario:- Four separate meeting rooms, each with its own lectern containing PC and laptop input as well as video inputs with associated audio displayed on to a projector, and joined by removable partitions needed work either as separate rooms, as two pairs or as one large meeting room. The solution was two sets of master and slave panels for the control with one at each lectern, a 1401-01 PC switcher set to auto switch for the PC and Laptop input, and a 7700-03 AV Matrix to look after the video switching and zoning for the audio output. The 7700-03 was connected to a 8220-01 Serial Combiner for control from two points. This combined with a bit of ingenious programming allowed the user to control individual systems from each lectern, paired systems from the master control panel lecterns, and the one large room from the lectern in room 1. 46 procon catalogue

5 year limited warranty ProCon Technology warrants its products to be free from defects in material and workmanship under normal use, subject to the limitations provided below. 1.1 Warranty Period For first 60 months after the date of shipment from the factory, ProCon Technology will repair or replace any defective part, without charge for labour or parts. Replacement parts will be covered by this limited warranty for the remainder of the warranty period. 1.2 Original Purchaser This Limited Warranty is limited to the original purchaser (end user of the product) from either ProCon Technology, or ProCon Technology authorised dealer, distributor or agent. 1.3 Warranty Service For servicing under this Limited Warranty, the product must be presented to ProCon Technology, or an authorised ProCon Technology service centre. 1.4 Shipping Prior to shipping a product or any sub-assembly to ProCon Technology, a Return Authorisation Number must be obtained from ProCon Technology Customer Service Department. The product must be shipped in the manufacturers original shipping carton or other ProCon Technology approved packaging. All freight and shipping charges to ProCon Technology must be prepaid by the purchaser. Damage resulting from the abuse in shipment of this product is not covered by this Limited Warranty. 1.5 Environmental Damage This Limited Liability does not cover damage or repairs that are necessary due to floods, winds, fires, lightening, accidents, corrosive atmosphere, excessive exposure to water (moisture) or heat, or any other conditions beyond the control of ProCon Technology. 1.6 Serial Number Defacement This Limited Warranty is void for the product if the serial number has been changed, removed or defaced. 1.7 Misuse This Limited Warranty does not cover repairs that are necessary due to; Incorrect Installation; Voltage conditions, blown fuses, open circuit breakers or any inadequacy or interruption of properly grounded electrical services; Misapplication, abuse, improper servicing, or any other improper operation, including misadjustment of any control; Defects in or caused by associated equipment; or; Repair and\or modification of a sub-assembly performed by other than ProCon Technology personnel. 1.8 Disclaimer of Warranties; Limitation of Liability ProCon Technology makes no warranty of any kind, express or implied, in connection with this product except as herein above provided. Implied warranties of merchantability or fitness for a particular purpose or arising from a course of dealing or usage of trade are specifically excluded. Should this product prove to be defective in material or workmanship, the purchaser s sole remedy shall be such repair or replacement as herein above expressly provided and under no circumstances shall ProCon Technology be liable for any loss, or damage, direct, incidental, or consequential, including loss of profits or business opportunities. procon catalogue 47

product index 1101-02 PC Splitter 34 1113-05 PC Switcher 26 1133-01 Wall Plate 20 1134-01 Wall Plate 20 1135-01 Wall Plate 20 1136-01 Wall Plate 20 1137-01 Floor Plate 22 1138-01 Floor Plate 22 1139-01 Floor Plate 22 1140-01 Floor Plate 22 1141-01 Floor Plate 22 1142-01 Floor Plate 22 1143-01 Floor Plate 22 1144-01 Floor Plate 22 1145-01 Floor Plate 22 1146-01 Floor Plate 22 1147-01 Floor Plate 22 1148-01 Floor Plate 22 1151-01 Floor Plate 22 1152-01 Floor Plate 22 1153-01 Floor Plate 22 1154-01 Floor Plate 22 1155-01 Module 42 1156-01 Floor Plate 22 1157-01 Floor Plate 22 1158-01 Floor Plate 22 1159-01 Floor Plate 22 1160-01 Floor Plate 21 1161-01 Floor Plate 21 1162-01 Floor Plate 21 1163-01 Floor Plate 21 1164-01 Floor Plate 21 1165-01 Floor Plate 21 1166-01 Floor Plate 21 1167-01 Floor Plate 21 1168-01 Floor Plate 21 1169-01 Floor Plate 21 1170-01 Floor Plate 22 1171-01 Floor Plate 22 1172-01 Floor Plate 22 1173-01 Floor Plate 22 1174-01 Floor Plate 21 1175-01 Floor Plate 21 1200-01 PC Splitter 34 1300-01 Wall Plate 17 1301-01 Wall Plate 17 1302-01 Wall Plate 17 1303-01 Wall Plate 18 1304-01 Wall Plate 18 1305-01 Wall Plate 18 1307-01 Wall Plate 19 1308-01 Wall Plate 19 1309-01 Wall Plate 19 1311-01 Wall Plate 17 1312-01 Wall Plate 17 1313-01 Wall Plate 42 1401-01 PC Switcher 26 1501-04 PC Switcher 27 1600-04 PC Switcher 27 2010-03 Integration Switcher 25 2020-01 Integration Switcher 24 2513-01 Video DA 38 2523-01 Video DA 39 2713-01 Video DA 40 2813-01 AV DA 37 2913-01 SVA DA 37 3403-01 RGB DA 35 3404-01 PC DA 36 3505-03 Video Switcher 28 3510-03 Video Switcher 28 3515-01 Video DA 39 3520-01 Video DA 39 3605-03 Audio Switcher 29 3610-03 Audio Switcher 29 3615-01 Audio DA 41 3620-01 Audio DA 41 3705-03 S-Video Switcher 29 3710-03 S-Video Switcher 29 3715-01 S-Video DA 40 3720-01 S-Video DA 40 3805-03 AV Switcher 28 3810-03 AV Switcher 28 3815-01 AV DA 38 3820-01 AV DA 38 3900-00 Hardware 42 3901-00 Hardware 42 3903-00 Hardware 42 3908-00 Hardware 43 3909-00 Hardware 43 3910-00 Hardware 43 3915-00 Hardware 43 3916-00 Hardware 43 4516-01 RGB DA 35 4616-01 PC DA 36 7042-01 RGB Matrix 32 7044-01 RGB Matrix 32 7062-01 RGB Matrix 32 7064-01 RGB Matrix 32 7082-01 RGB Matrix 32 7084-01 RGB Matrix 32 7088-01 RGB Matrix 32 7102-01 RGB Matrix 32 7180-01 RGB Matrix 32 7500-03 Video Matrix 30 7540-03 S-Video Matrix 30 7600-03 Audio Matrix 31 7700-03 AV Matrix 31 8050-01 Audio Isolation 42 8100-01 Cable 8 8110-01 Cable 8 8220-01 Serial Combiner 12 8230-01 IR to Serial 12 8200-03 LV Relay 10 8210-03 HV Relay 10 8300-03 IR Expansion 11 8350-01 IR Learner 11 8360-01 IR Head 8 8365-01 IR Head 8 8370-01 IR Head 8 8404-03 Control Panel 4 8406-03 Control Panel 5 8408-03 Control Panel 5 8416-03 Control Panel 6 8450-02 IP Control 14 8455-02 IP Control 14 8460-02 IP Control 14 8465-02 IP Control 14 8504-03 Control Panel 7 8506-03 Control Panel 7 8508-03 Control Panel 7 8516-03 Control Panel 7 8580-03 Control Panel 7 8604-01 Control Panel 3 8606-01 Control Panel 3 8607-01 Control Panel 4 8654-01 Control Panel 3 8656-01 Control Panel 3 8657-01 Control Panel 4 8700-01 Control System 9 8701-01 Control System 9 8808-03 Control Panel 6 8828-03 Control Panel 6 8816-03 Control Panel 7 8901-00 to 8945-00 Buttons 8 Site Manager Software 15 48 procon catalogue

In the aim of continual improvement all specifications are subject to change without prior notice. Whilst every effort is made to ensure the details in this catalogue are correct Procon Technology shall not be liable for any damage, loss or expense incurred from such details. All trademarks are acknowledged as being the property of their respective owners. All rights reserved. Copyright Procon Technology 2006.

edition Distributed by info@procon.co.uk www.procon.co.uk