KVT Split cable glands

KVT Split cable glands Description Type Order Inserts KT Thread PU No. small large Thread length KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Polyamide locknuts are included in the shipment. KVT 2* 403 1 - M2 x 1. For routing SUB-D, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required. The cut-out dimensions are listed on page 126. * max. Cable diameter 1mm KVT 32 4036 1 - M32 x 1. Locknuts Special locknuts with cut-outs are separate available. KVT 32 + KGM-SUB-D9 4037 1 - M32 x 1. KGM-SUB-D9 (Order No. 4) fits SUB-D9 connectors. KVT 40 4203 1 - M40 x 1. KGM-PB (Best.Nr. 47) fits DVI and PROFIBUS connectors. KGM-SUB-D2 (Order No. 48) fits SUB-D2 connectors. KVT 40 + KGM-PB 420 1 - M40 x 1. 18 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

KVT Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT 0 2 4204 2 - KVT 0 2 + KGM-SUB-D2 4206 2 - M0 x 1. M0 x 1. Advantages Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment Specification KVT 63 1** 4211-1 KVT 63 4** 4214 4 - M63 x 1. M63 x 1. Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes KT Cable inserts KVT-EMC bracket Locknuts Page 24 28 Page 9 Page 126 ** For KVT 63 a locknut M63 (brass-nickel plated) is included in delivery. www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 19

KVT 80 Split cable glands Description Type Order No. Inserts KT PU small large The KVT 80 split cable glands are designed for routing and sealing pre-terminated cables. By connecting the two half-shells with attached screws, the inserts provide sufficient pressure on the routed cables to obtain a high degree of strain relief. The KVT 80 is applicable for wall thicknesses from 1. mm to mm. KVT 80 3 4236 2 1 1 KVT 80 6 4237 6-1 Advantages Insertion of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly High packing density, wide variety Provides very good strain relief Quick and easy assembly from the front side Note When mounting the KVT 80 on sheet metal, we recommend the following torque values: 1. mm sheet = 1 Nm From 2.0 mm sheet = 1. Nm Specifi cation Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) 80 mm diameter KT Inserts Page 24 28 20 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

KVT - SNAP Split cable glands Type Order Inserts KT Thread PU Description No. small large Thread length KVT - SNAP 32 4130 1 - M32 x 1. Length: 11 mm KVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. Pre terminated cables can be routed through thick walls (> mm) e.g. into cast junction boxes by using the model KVT-SNAP, without the use of tools. KVT - SNAP 40 4134 1 - M40 x 1. Length: 11 mm * For KVT 63 a locknut M63 (brass-nickel plated) is included in delivery. Assembly KVT - SNAP 63 4* 412 4 - M63 x 1. Length: 11 mm SNAP ring is screwed into metric thread tapped into housing (or it can be fastened with a lock nut). Once the SNAP ring is affixed to the housing the KVT equipped with cables is simply pushed into the SNAP ring. Quick and easy installation! Specification KVT - SNAP 63 1* 414-1 M63 x 1. Length: 11 mm KGM 32 227 PA, grey M32 x 1. Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard cut-outs KGM 40 2276 PA, grey M40 x 1. KGM 63 2278 PA, grey M63 x 1. www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 21 KT Cable inserts KVT-EMC bracket Locknuts Page 24 28 Page 9 Page 126

KVT - W90 Split cable glands Description Type Order No. Inserts KT Thread PU with locknut small large Thread length The split KVT-W90 cable glands are used to insert and seal pre-terminated cables and conduits at a 90 0 angle. In particular, the KVT 0-W90 is perfectly suited to hold corrugated or smooth hoses. A large number of cable entry inserts is available to the user. KVT 32 - W90 4404 1 - M32 x 1. Length: 11. mm Polyamide locknuts are included in the shipment. Advantages GMT 32 31120 - M32 x 1. Installation at an angle of 90 0 to the cabinet Insertion of pre-terminated cables and conduits Warranty of pre-terminated cables remains Suitable for standard or metric cut-outs KVT 0 4 - W90 4424 4 - M0 x 1. Length: 11. mm Specification Colour Polycarbonate IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) similar RAL 703 KVT 0 1 - W90 4414-1 M0 x 1. Length: 11. mm KT Cable inserts WST Conduit, split KVT-EMC bracket Locknuts Page 24 28 Page 120 Page 9 Page 126 GMT 0 31140 - M0 x 1. 22 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

21 KT Inserts, small 21 Description Type Order No Order No Clamping range PU grey black BTK BTK 4121 4131 Blind insert KT cable inserts small are used with the following cable entry frames: KEL - Page 6-13 KEL-FG - Page 14-1 KVT - Page 18-21 KVT-W90 - Page 22 The model range KT small is designed for cable diameters from 2 to 17mm. Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. Specification KT grey - 40 C to+ 90 C (static) KT KT 2 39934 41302 2-3 mm KT 3 41203 41303 3-4 mm KT 4 41204 41304 4 - mm KT 4120 4130-6 mm KT 6 41206 41306 6-7 mm KT 7 41207 41307 7-8 mm KT 8 41208 41308 8-9 mm KT 9 41209 41309 9 - mm KT 412 413-11 mm KT 11 41211 41311 11-12 mm KT 12 41212 41312 12-13 mm KT 13 41213 41313 13-14 mm KT 14 41214 41314 14-1 mm KT 1 4121 4131 1-16 mm KT tele KTs 16 39901 39912 16 mm KTs 17 39900 39913 17 mm Specification KT black KT oval KT tele 39929 - Telephone cable UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized KT S1 KT oval 39930 - approx. 8 x 4 mm KT S1 39931-24 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

21 KT Inserts, small 21 Type Order No Order No Clamping range PU Description grey black KT 2 2 3993 39936 2x ø 2 mm KT 2 x KT 2 3 39939 39940 2x ø 3 mm KT 2 4 39906 39907 2x ø 4 mm KT 2 41200 39904 2x ø mm KT 2 6 41201 3990 2x ø 6 mm KT cable inserts small are used with the following cable entry frames: KT 2 7 41202 39916 2x ø 7 mm KT 2 8 39917 39918 2x ø 8 mm KT 4 2 39937 39938 4x ø 2 mm KT 4 3 39914 3991 4x ø 3 mm KT 4 x KEL - Page 6-13 KEL-FG - Page 14-1 KVT - Page 18-21 KVT-W90 - Page 22 The model range KT small is designed for cable diameters from 2 to 17mm. KT 4 4 39909 39911 4x ø 4 mm KT 4 39908 399 4x ø mm KT 4 6 39932 39933 4x ø 6 mm KT ASI2 rl KT-ASI 39902 39903 1 ASI-cable KT-ASI2 rl 39922 39924 2 ASI-cables KT-ASI2 ll 39921 39923 2 ASI-cables Assembly When installing the insert, the smooth side of the insert faces the middle of the cable entry frame. Specification KT grey KT ASI2 ll - 40 C to+ 90 C (static) KTRS 12 39990 - KTRS KTRS 13 39992 - KTRS 16 39996 - Specification KT black UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 2

KT Inserts, large 41, 42 Description Type Order No. Order No. Clamping range PU grey black ATG ATG 4123 4133 Adapter insert The KT inserts large accept a wide range of cable diameters from 16 to 34 mm. They are used with the following cable entry frames: KEL - Page 6-13 KEL-FG - Page 14-1 KVT / KVT-W90 - Page 18-22 KEL 183 - Page 32 BTG BTG 4122 4132 Blind insert or - 20 mm ATG adapter inserts provide the possibility to hold a small KT insert to reduce the clamping range down to 2 mm. KT 28 KT 16 41216 41316 16-17 mm KT 17 41217 41317 17-18 mm KT 18 41218 41318 18-19 mm Specification KT grey - 40 C to+ 90 C (static) KT 19 41219 41319 19-20 mm KT 20 41220 41320 20-21 mm KT 21 41221 41321 21-22 mm KT 22 41222 41322 22-23 mm KT 23 41223 41323 23-24 mm KT 24 41224 41324 24-2 mm Specification KT black KT 2 4122 4132 2-26 mm KT 26 41226 41326 26-27 mm UL-94 HB - 30 C to + 90 C (static) higher chemical resistance, UV-stabilized KT 27 41227 41327 27-28 mm KT 28 41228 41328 28-29 mm KT 29 41229 41329 29-30 mm KT 30 41230 41330 30-32 mm KT 32 41232 41332 32-33 mm KT 34 41234 41334 33-34 mm 26 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

21 41,0 KTMB Inserts, multi-range 21 42 KTMB large KTMB small Type Order No. Size Clamping range PU Description grey KT KTMB-A 41432 KT small 2. - 6. mm KTMB-D KTMB-B 41434 KT small 4.0-7. mm KTMB-C 41436 KT small 6. - mm KTMB-D 41438 KT small 9. - 13 mm KTMB The KTMB inserts accept a wide range of cable diameters. A great benefit when exact cable diameter is not known in advance. The KTMB inserts are not split and therefore only usable for cables without connectors. KTMB-E 41440 KT small 13-16 mm Cross section KTMB Specification KTMB grey KTMB-G 41460 KT large 13-18 mm KTMB-H 4146 KT large 18-23 mm - 40 C to+ 90 C (static) KTMB-I 41470 KT large 23-28 mm KTMB-J 4147 KT large 28-33 mm The correct size of the KT inserts can easily be determined by using the cable template. Determining the diameter of the cable using the cable template Selecting the KT inserts according the data on the cable template KTMB-K 41480 KT large 2x 13-18 mm Order-No. 39800 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 27

DT Cable entry inserts Description Type Order No. Number of PU cables The DT cable inserts are designed for standard cables (without connectors). A large number of cables can be routed utilizing minimal space. DT 1 4100 12x max. 6. mm 2x max. 12.2 mm DT inserts are designed to fit in KT large insert spaces: KEL 24 KEL 16 KEL KEL-B - Page 6-9 KEL 24 Extensions - Page 11-13 KEL-FG - Page 14-1 KEL 183 - Page 32 DT 2 41 16x max. 7.1 mm Advantages DT 3 4120 4x max. 6. mm 3x max. 9. mm 3x max. 11.3 mm Combination of routing pre-terminated and standard cables with one cable entry frame Enables a sub-assembly of cable harnesses High packing density DT 4 4130 9x max. 9. mm Specification IP 4-40 C to + 90 C (static) 28 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

ST Plugs Type Order No. Diameter Length PU Description D L ST 2 42909 2.0 mm 2 mm 2 ST 3 42901 3.0 mm 2 mm 2 ST 4 42908 4.0 mm 2 mm 2 ST 42906.0 mm 2 mm 2 ST 6 42903 6.0 mm 2 mm 2 Plugs are used to close either KT inserts or KEL-DPZ cable entry plates not equipped with cables. Perfect for appplications where cables have been removed. ST 7 4290 7.0 mm 2 mm 2 ST 8 42899 8.0 mm 20 mm 2 ST 9 42897 9.0 mm 20 mm 2 ST 4289.0 mm 20 mm 2 Advantages Sealing unused cable entries ST 11 42893 11.0 mm 20 mm 2 ST 12 42891 12.0 mm 20 mm 2 ST 13 42889 13.0 mm 20 mm 2 ST 14 42887 14.0 mm 20 mm 2 ST 1 4288 1.0 mm 20 mm 2 ST 16 42883 16.0 mm 20 mm 2 Specification Polyamide, white IP 4-40 C to + 120 C ST 17 42881 17.0 mm 20 mm 2 ST ASI 42877-2 mm 2 KT + DT Cable inserts Cable entry plates DPZ Cable entry plates DP Page 24+2 28 Page 46 1 Page 2 4 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 29

QVT Split cable glands Description Typs Order Cable Thread PU No. Inserts Thread length QVT is a circular split frame for quick and easy installation of cables or complete cable harnesses. QVT 20 469 1 x QT M20 x 1. Length: 13 mm The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. Advantages QVT 2 4702 1 x QT M2 x 1. Length: 13 mm Compact and small structure Routing of assembled cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Locknut is part of delivery. QVT 32 4711 1 x QT M32 x 1. Length: 13 mm Specifi cation Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes QVT 40 2 471 2 x QT M40 x 1. Length: 13 mm QT Cable inserts KVT-EMC bracket KGM locknut Page 43 Page 9 Page 126 QVT 0 4 4722 4 x QT M0 x 1. Length: 13 mm 38 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0

QVT - CLICK Pluggable cable glands Type Order Cable PU Description No. Inserts QVT - CLICK 2 4730 1 x QT QVT-CLICK is a circular split frame for quick and easy installation of cables or complete cable harnesses. The QVT range is especially suitable for small machines, devices and instruments, because of the extremly small structure. QVT - CLICK 32 4732 1 x QT Advantages QVT - CLICK 40 4734 2 x QT Compact and small structure Routing of pre-terminated cables Warranty of pre-terminated cables remains Retrofitting and maintenance can be carried out easily and quickly Suitable for metric or standard hole sizes Assembly within seconds For wall thickness 1. - 2. mm Quick and easy assembly from the front side Specification Colour Cut-out dimension Polycarbonate similar RAL 703 IP 4, with gasket and correct selection of the cable inserts - 30 C to + 0 C (static) metric standard sizes QT Cable inserts Page 43 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 39

QT Inserts Insert QT in combination with QVT-CLICK Type Order No. Clamping range PU Description grey QTB 4240 Blind insert QT 3 4203 3-4 mm QT 4 4204 4 - mm QT 420-6 mm QT 6 4206 6-7 mm QT 7 4207 7-8 mm QT 8 4208 8-9 mm QT 9 4209 9 - mm The QT range supports cable diameters from 3 to 1 mm. They are used with the following cable entry frames: KEL-Quick - Page 36 37 QVT / QVT-CLICK - Page 38 39 KEL-QTA - Page 40 41 QT 42-11 mm QT 11 4211 11-12 mm QT 12 4212 12-13 mm QT 13 4213 13-14 mm QT 14 4214 14-1 mm QT 2 3 4266 2x ø 3 mm Assembly When installing the insert, the smooth side of the insert has to face the middle of the cable entry frame. QT 2 4 4268 2x ø 4 mm QT 2 4270 2x ø mm QT 2. 4271 2x ø. mm QT 2 6 4272 2x ø 6 mm QT 2 6. 4276 2x ø 6. mm QT 2 7 4278 2x ø 7 mm Specification - 40 C to+ 90 C (static) QT 4 3 4280 4x ø 3 mm QT 4 4 4282 4x ø 4 mm QT 4 4. 4283 4x ø 4. mm QT 4 4284 4x ø mm QT 4. 428 4x ø. mm QT 4 6 4286 4x ø 6 mm QT-ASI 1 4273 1x ASI-cable QT-ASI 2 4274 2x ASI-cable QT tele 427 Telephone cable KEL-QUICK Cable entries QVT Cable glands KEL-QTA Cable entries Page 36 37 Page 38 39 Page 40 41 www.icotek.de tel +49 (0) 71 7-923 80 0 fax +49 (0) 71 7-923 80 0 43