7RF Connectors. RF Connectors. Table of Contents

RF Connectors Table of Contents Military Qualified Introduction.........................................................7003 N Series Connectors MIL-C-3902 50 Ohm..................................................... 7004, 7005 NC Connectors MIL-C-3902 50 Ohm..................................................... 7006, 7007 TNC Connectors MIL-C-3902 50 Ohm..................................................... 7008, 7009 SM Connectors MIL-C-3902 Introduction.................................................. 700-702 For Flexible Cable............................................. 703-706 Panel Mount...................................................... 707 For Semi-Rigid Cable........................................... 708-7020 Printed Circuit Mount................................................ 702 In-Series dapters MIL--55339........................................ 702 SM Receptacles MIL-C-8357 Panel Mount.................................................. 7022-7024 Surface Launch.................................................... 7025 End Launch....................................................... 7026 Field Replaceable Launchers......................................... 7027 DSCC pproved SM Series for Semi-Rigid Cable........................................ 7028 SSM Connectors for Semi-Rigid and Flexible Cable........................ 7029 M lindmate Connectors for Semi-Rigid and Flexible Cable................. 7030 P Microminiature Push-On Coaxial Connectors for Semi-Rigid Cable........703 etween Series dapters for Semi-Rigid and Flexible Cable.............. 7032, 7033 Coaxial Cable Termination One-Step NC/TNC Connectors.................................... 7034-7039 P Microminiature Push-On Coaxial Connectors Introduction.................................................... 7040, 704 s.............................................................. 7042 Shrouds...................................................... 7043, 7044 etween Series dapters.............................................. 7044 M Microminiature Connectors Introduction.................................................... 7045, 7046 For Flexible and Semi-Rigid Cables...................................... 7047 SSM Subminiature Coaxial Connectors Introduction.................................................... 7048-7050 For Semi-Rigid Cable................................................. 705 For Flexible Cable.................................................... 7052 Panel Mount Receptacles.............................................. 7053 ulkhead Mount Receptacles........................................... 7053 Panel Mount Receptacles.............................................. 7054 Printed Circuit oards................................................. 7054 Microstrip Transmission Line Circuits..................................... 7054 Hermetically Sealed............................................. 7055, 7056 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 700

RF Connectors Table of Contents (Continued) SSM Subminiature Coaxial Connectors (continued) In-Series dapters................................................... 7057 High Frequency for Semi-Rigid Cable.................................... 7058 pplication Tooling............................................... 7059-7064 Cross Reference..................................................7065-7068 MICRODOT Coaxial Connectors Introduction.........................................................7069 Standard Connectors Performance Data Summary..........................................7070 Screw-On Series...............................................707-7076 Slide-On Series................................................7077-709 Quick-Connect Series...........................................708-7083 Twinax Series......................................................7084 Triax Series and Terminals............................................7085 Module locks.....................................................7086 Caps for Screw-On Series, Receptacle Hoods............................7087 Feed Thru dapters for Screw-On Series................................7088 NC and TNC dapters for Screw-On, Slide-On, Quick-Connect Series...7088, 7089 Gold Plated Crimp Style Coaxial Connector Series Performance Data Summary..........................................7090 Screw-On Series...............................................709-7094 ssembly Tools....................................................7094 LEPR/CON Ultra-Miniature Connectors Performance Data Summary..........................................7095 Screw-On Series Standard Interface.............................7096, 7097 Screw-On Series Locking Interface..............................7098, 7099 Slide-On Series...............................................700, 70 ssembly Tools....................................................70 NC / LEPR/CON dapters.....................................702, 703 Snap-Lock Series...................................................704 Cable ssemblies...............................................705, 706 Cable cceptance Dimensions......................................707-72 Hermetic Connectors Coaxial Screw-On, Slide-On Series................................73, 74 ppendix - Theory and pplication.........................................75-720 - Typical Coaxial Cable Specifications..............................72-723 C - Maximum Power Handling Capabilities for Cables........................724 D - Nominal Loss Characteristics for Cables................................725 7002 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified Introduction MIL-C-3902 Defines the general requirements and tests for radio frequency (RF) connectors used with flexible RF cables and certain other types of coaxial transmission lines. It includes the following series of connectors in this catalog: N, NC, TNC, SM MIL-C-55339 Defines the performance requirements and tests for between series and within series, RF coaxial connector adapters. The In-Series dapters are shown in this catalog MIL-C-8357 Defines the general requirements and test for RF connectors used with coaxial, strip, or microstrip transmission line devices. It includes the SM Receptacles as shown in this catalog Definition of Categories for MIL-C-3902 Category Flexible Cable Field serviceable, no special tools required to assemble. Standard wrenches, soldering equipment, pliers, etc., are not defined as special tools. Captured center contact. Category Flexible & Semi-Rigid Cable Non-field replaceable, special tools may be required. These connectors may be used for original installations. Field replacement is intended to be made by Category or C Connectors. Will not be stocked or procured by the Government. Captured and noncaptured center contacts. Category C Flexible Cable Field replaceable. Requires crimp tool and specified cable stripping dimensions. Captured center contact. Recommended crimp tool kit: Part Number 055236-. Category D Flexible Cable Field replaceable. Requires crimp tool for center contact and outer ferrule; specified cable stripping dimensions (same as Category C) and defined piece parts. Captured center contact. Recommended crimp tool kit: Part Number 055236-. Category E Semi-Rigid Cable Field replaceable. Requires specified cable stripping dimensions. Captured and noncaptured center contact. Uses standard tool kit: Part Number 055420-. Category F Semi-Rigid Cable Field replaceable. Requires crimp tool and specified cable stripping dimensions. Captured center contact. Recommended crimp tool kit: Part Number 055835-. 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7003

Military Qualified N Series Connectors MIL-C-3902 50 Ohm Product Facts Dual O Crimp connectors are MIL-C-3902, Class II, Category qualified Captive center contacts Completely crimpable application one hand tool crimps all cables with single or double braided shields of a given size Impedance matching crimps road band performance low VSWR Superior cable retention TEFLON dielectric Silver finish The MP N MIL-C-3902 Connector, featuring a.625 [5.88] - 24 threaded coupling for optimum stability, is highly suited for critical applications and environments. This medium sized connector can withstand shock and vibration for a low noise level and has a constant impedance of 50 ohms. It also features a captive center contact and provides excellent performance at frequencies up to GHz, with voltages to 000 volts rms. This connector offers the added benefits of low overall applied cost with a labor-saving two-crimp assembly. The contact is simply crimped to the cable s center conductor, then both braid and cable support are simultaneously crimped to complete the termination. N Series Connectors are available in standard plug, jack, bulkhead jack and rightangle plug configurations. Materials rass QQ--626 eryllium Copper QQ-C-530 Dielectric TEFLON TEFLON MIL-P-9468 Copper, nnealed QQ-C-576 Phosphor ronze QQ--750 Silicone Rubber ZZ-R-765 Plating ody Silver per QQ-S-365 Center Contact Gold per STM 488, type 3, grade C Electrical Characteristics Nominal Impedance 50 ohms Working Voltage 000 volts, rms at sea level Frequency Range 0 to GHz Voltage Standing Wave Ratio (VSWR) Straight Plug or -.3: max. Right-ngle Plug.35 max. at 0 to 9.0 GHz.50 max. at 9.0 to.0 GHz Contact Resistance Outer Contact 0.2 milliohms Center Contact.0 milliohms Right-ngle 2.5 milliohms Insulation Resistance 5000 megohms min. Dielectric Withstanding Voltage 2500 Volts, rms at sea level RF Leakage -90 d min. at 2 to 3 GHz RF Insertion Loss 0.5 d max. at 0 GHz; Right-ngle Plug, 0.3 d max. at 0 GHz Corona Level 500 volts min. at 2 336 m [70,000 ft.] Mechanical Characteristics Mating/Unmating Threaded coupling Cable ttachment Crimp type - center contact and braid Coupling Nut Retention 445 N [00 lbs.] min. Cable Retention 400 N [90 lbs.] min. RG 24/U Cable Durability 500 cycles per MIL-C- 3902 Captive Contact 27 N [6 lbs.] min. axial retention, either direction Environmental Characteristics Temperature Range -85 F to +329 F [-65 C to +65 C] Vibration MIL-STD-202, Method 204, Test Cond. Shock MIL-STD-202, Method 23, Test Cond. I Moisture Resistance MIL-STD- 202 Method 06 Salt Spray MIL-STD-202, Method 0, Test Cond Temperature Cycling MIL-STD- 202, Method 07, Test Cond. (except high temperature is +85 C) Note: ll data pertains to use with MIL-C-3902 specified cables only. Termination Tooling Integral Die Hand Tool Part Number 22005-7004 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified N Series Connectors MIL-C-3902 50 Ohm (Continued) Dual Crimp Plugs MIL-C-3902/0.750 [9.05] Max. L Max. Military MP Dim RG/U L Cable 0007 Weatherproof 225092-2.859 47.22 8, 8, 23 0007 5692-2.687 42.85 8,8,23 003 5692-4.687 42.85,, 26 002 Weatherproof 225092-7.859 47.22 225 0008 Weatherproof 225092-.859 47.22 9, 9, 9, 24 0008 5692-.687 42.85 9, 9, 9, 24 Crimp s MIL-C-3902/02 Military MP RG/U Cable 0008 225093-2 8, 8, 23.627 [5.93] Max..937 L [49.9] Max. Crimp ulkhead s MIL-C-3902/03.885 [22.48] Max. 2.25 L [53.98] Max..630/.645 [6/6.38].532/.543 [3.5/3.79] Maximum Panel Thickness [6.35] Recommended Panel Cutout 7RF Connectors Military MP RG/U Cable 0004 Weatherproof 225094-2 8, 8, 23 0005 Weatherproof 225094-9, 9, 9, 24 Crimp Right-ngle Plugs MIL-C-3902/05 2.0 [.827] Max. 35.86 [.42] Max. L Max. Military MP Dim RG/U Part No L Cable 0002 22504-2 2.275 57.79 8, 8, 23 0002 Weatherproof 225389-2 2.453 62.3 8, 8, 23 0003 22504-3 2.275 57.79 9, 9, 9, 24 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7005

Military Qualified NC Connectors MIL-C-3902 50 Ohm Product Facts Dual O Crimp Connectors are MIL-C-3902, Class II, Category or qualified ayonet lock coupling for quick connect/disconnect Various connectors available in 50 ohm versions Fully intermateable with comparable NC UG/U connectors Low VSWR Related Product Data Performance Specifications See chart below Material Specifications See chart below Military Category ll MIL type O crimp connectors are Category Type (MP Crimp Tooling), unless otherwise noted. Packaging ll connectors are packaged individually. The MP NC RF MIL-C- 3902 connector family with bayonet locking coupling provides highly reliable, quick connect /disconnect coaxial connections. Exclusive O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. vailable in 50 ohm versions, these connectors feature numerous styles including cable plugs and jacks. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-3902 specifications. 7006 Characteristics Category O Crimp (MIL Type) Electrical Impedance, Nom. (Ohms) 50 Working Voltage (Volts RMS) 500 Contact Resistance Inner:.5 (Milliohms) Outer: 2.0 Initial Insulation Resistance (Megohms) 5000 Dielectric Withstanding Voltage (VC) 500 Corona Level at 70,000 ft. (Volts, RMS) 375 RF Leakage, Max. (d) -55 at 2-3 GHz RF Insertion Loss, Max. (d) 0.2 at 3 GHz Frequency Range (GHz) 0-4 VSWR in Frequency Range Max..30 Mechanical Force to Engage (lbs. [N])/couple, 3.3/.2 (in-lbs. [N-M]) max. [3/2.5] Coupling Nut Retention, 444.8 Min. N [lbs.] [00] Cable Retention, 266.9 [60] N [lbs.] (RG58C/U) Durability (Cycles) 500 Jam Nut Mounting Torque, 25 Max. [N m] (in. lbs.) [2.8] Environmental Temperature Range, Operating (C ) -65 to +65 / -55 to +85 2 Vibration MIL-STD-202 Method 204 Cond. Physical Shock MIL-STD-202 Method 23 Cond. G, 50 G s Thermal Shock MIL-STD-202 Method 07 Moisture Resistance MIL-STD-202 Method 06 Salt Spray MIL-STD-202 Method 0 Cond. Product Specification 08-2020 ssembled to cable with polytetrafluoroethylene dielectric. 2 ssembled to cable with polyethylene dielectric. Connector Component Connector Material Collar Outer Contact (Plug) Shell () Dielectric Center Contact (Plug) Center Contact () Gasket Ferrule Connector Primary Finishes Category & O Crimp (MIL Type) rass, QQ--626 Phos. ronze, QQ--750 rass, QQ--626 TEFLON, MIL-P-9468 rass, QQ--626 eryl. Copper, STM--643 QQ-C-530 Silicon Rubber, QQ-R-765 Copper, QQ-C-576 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Collar Outer Contacts (Plug & ) Center Contacts (Plug & ) Ferrule 2 Silver, QQ-S-365 right Nickel, QQ-N-290 Silver, QQ-S-365 right Nickel, QQ-N-290 Gold MIL-G-45204 Silver, QQ-S-365 Tin Lead, STM--545 If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 2 Ferrules with tin-lead finish are used with nickel plated outer contacts.

Military Qualified NC Connectors MIL-C-3902 50 Ohm (Continued) Dual Crimp Plugs MIL-C-3902/6.572 4.53 [4.53] [.572] Max. L Max. Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dim Dies for Hand Category RG/U Hand Tool 354940- L Cable or Tool 6970- PRO-CRIMPER & 626 Pneu. dapter 679304- Head 386-0004 2-33350-.328 33.74 58,58,58,58C, 22089-3 or 990-69727 0007 2-33350-9.88 30.8 42,42,42,400, 22089-3 or 990-69727 0008 33350.88 24, 40, 20, 62, 30.8 62, 62, 59, 59, 59 elden 929, 9209, 9269 58537-69669- Dual Crimp s MIL-C-3902/7.436 [.08] Max..20 [30.48] Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dies for Hand Category RG/U Hand Tool 354940- Cable or Tool 6970- PRO-CRIMPER & 626 Pneu. dapter 679304- Head 386-0004 2-3335- 58, 58, 58, 58C 22089-3 or 990-69727 24, 40, 20, 62, 0008 3335 62, 62, 59, 59 59 58537-69669- elden 929, 9209, 9269 Dual Crimp ulkhead s MIL-C-3902/9 +.005.505 -.000 [2.83 +0.3] -0.00 H.625 [4.28] H = /6" across flats,.800 [20.32] Max. across points +0.3.28-0.00 [5.54 +.005] -.000 Recommended Panel Cutout Maximum Panel Thickness.25 [3.8] Interchangeable Dies For PRO-CRIMPER Interchangeable Military MP Dies for Hand Category RG/U Hand Tool 354940- Cable or Tool 6970- PRO-CRIMPER & 626 Pneu. dapter 679304- Head 386-0003 -33693-58, 58, 58, 58C 22089-3 or 990-69727 24, 40, 20, 62, 0007 33693 62, 62, 59, 59, 59, 58537-69669- elden 929, 9209, 9269 7RF Connectors Field Serviceable ulkhead MIL-C-3902/9 +.005.505 -.000 [2.83 +0.3] -0.00 H H = /6" across flats,.800 [20.32] Max. across points Military MP Category RG/U Cable 24, 40, 20, 62, 62, 62, 59, 59, 59, elden 929, 9209, 9269, -002 2233-2 89269, 8824, Hi-Temp 62, Times PL-62, erk-tek TDC-59, TDC-62, 302, 7, 7, 7 Recommended Panel Cutout Maximum Panel Thickness.240 [6.0] Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967.200 [30.48] +0.3.28-0.00 [5.54 +.005] -.000 7007

Military Qualified TNC Connectors MIL-C-3902 50 Ohm Product Facts Dual O Crimp Connectors are MIL-C-3902, Class II, Category qualified 50 ohm versions available Provides excellent performance at frequencies up to GHz Standard and weatherproof versions available Plugs available for high temperature cable Related Product Data Military Category ll crimp connectors are Category Type (MP Crimp Tooling), unless otherwise noted. Packaging ll connectors are packaged individually. The MP TNC RF MIL-C- 3902 connector family, with 7/6-28 threaded couplings, provides low noise levels and optimum stability, and can withstand the shock and vibration often present in harsh environments. vailable in 50 ohm versions, these connectors feature cable plugs and jacks. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-3902 specifications. Characteristics Category O Crimp (MIL Type) Electrical Impedance, Nom. (Ohms) 50 Working Voltage (Volts RMS) 500 Contact Resistance Inner:.5 (Milliohms) Outer: 0.2 Initial Insulation Resistance (Megohms) 5000 Dielectric Withstanding Voltage (VC) 500 Corona Level at 70,000 ft. (Picocoulombs) 5 max. @375 VRMS RF Leakage, Max. (d) 60 at 2-3 GHz RF Insertion Loss, Max. (d) 0.8 at 9 GHz Frequency Range (GHz) 0- VSWR in Frequency Range Max..3 Mechanical Force to Engage/Couple, 2/2 lbs. [N] [8.9/8.9] Coupling Nut Retention, 00 Min. lbs. [N] [444.8] Cable Retention, 60 [266.9] lbs. [N] RG58C/U Durability (Cycles) 500 Jam Nut Mounting Torque, 25 Max. lbs. [N m] [2.8] Environmental Temperature Range, Operating (C ) -65 to +65 / -55 to +85 2 Vibration MIL-STD-202 Method 204 Cond. Physical Shock MIL-STD-202 Method 23 Cond. I, (00 G s) Thermal Shock MIL-STD-202 Method 07 Cond. Moisture Resistance MIL-STD-202 Method 06 Salt Spray MIL-STD-202 Method 0 Cond. Product Specification 08-200 ssembled to cable with polytetrafluoroethylene dielectric. 2 ssembled to cable with polyethylene dielectric. Characteristics Connector Material Collar Outer Contact (Plug) Outer Contact () Dielectric Center Contact (Plug) Center Contact () Gasket Ferrule Connector Primary Finishes Collar Outer Contact (Plug & ) Center Contact (Plug & ) Ferrule Category O Crimp (MIL Type) rass, QQ--626 Phos. ronze, QQ--750 eryl. Copper, QQ-C-530 rass, QQ--626 TEFLON, MIL-P-9468 rass, QQ--626 eryl. Copper, STM--643 QQ-C-530 Silicon Rubber, QQ-R-765 Copper, QQ-C-576 Silver, QQ-S-365 right Nickel, QQ-N-290 Silver, QQ-S-365 Gold, MIL-G-45204 If several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specification. 7008 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified TNC Connectors MIL-C-3902 50 Ohm (Continued) Dual Crimp Plugs MIL-C-3902/26 (Weatherproof).640 [6.26]Max..375 [34.93] Military MP RG/U Interchangeable Dies Cable for PRO-CRIMPER Frame 354940-0005 225550-2 58, 58, 58, 58C 9902-0006 225550-6 42, 42, 42, 400 9902-0007 225550-3 24, 40, 20, 62, 62, 62, 59, 59, 59, elden 929, 9209, 9269 9903-006 225550-55,55, 55, 223 9902- Crimp s MIL-C-3902/27 (Weatherproof) Crimp Panel MIL-C-3902/29.450 [.43] Max..406 Max. [35.72] Military MP RG/U Interchangeable Dies Cable for PRO-CRIMPER Frame 354940-0005 22555-2 58, 58, 58, 58C 9902-005 22555-5 4, 4, 303 9902-006 22555-55, 55, 55, 223 9902-0006 22555-6 42, 42, 42, 400 9902-.500 ±.004 [2.7 ±0.].44 [.2] Min. 7RF Connectors.703 Sq. [7.86] Max..375 [34.93].07 [2.7] Min. Clearance for 3-56 Screws (4 Holes).500 ±.004 [2.7 ±0.] Recommended Panel Cutout Military MP RG/U CERTI-CRIMP Cable Hand Tool with Integral Die 0005 225348-2 58, 58, 58, 58C 220045-2 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7009

Military Qualified SM Connectors MIL-C-3902 Product Facts Performance to 8 GHz Uses industry standard crimp tools and processes Qualified to MIL-C-3902 Tyco Electronics offers a complete line of SM connectors. To satisfy the broad range of applications, SM connectors are available in a broad range of standard configurations including; straight and rightangle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in-series adapters, including connectors for semirigid cable and micro-strip applications. 700 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Connectors MIL-C-3902 (Continued) Electrical Properties MIL Type Cable Contact Resistance Insulation Dielectric Corona Frequency RF High VSWR (milliohms max.) Resistance Withstanding Extinction RF Military Potential RF Max. (fghz) Center Outer (megohms Voltage Voltage at Transmission Slash Sheet at 5 MHz Leakage (GHz) Contact Contact min.) (Volts RMS) 70,000 Ft. Loss M7/ (V RMS) (d min.) (V RMS min.) (GHz) 93-RG78 2.4.20+0.025 3 2 5,000 500 25 0.06 x sqrt (freq) 335-60 54-RG22, 9-RG74, 94-RG79, 3-RG36, 2.4.5+0.02 3 2 5,000 750 90 0.06 x sqrt (freq) 500-60 52-28-RG058, 60-RG42, 84-RG223, -RG303, 2.4.5+0.0 3 2 5,000 000 250 0.06 x sqrt (freq) 670-60 MIL-C-3902/55 28-RG400 69-0000 2.4.5+0.0 3 2 5,000 500 25 0.06 x sqrt (freq) 335-60 73-0000, 72-0000, 57-0000 2.4.5+0.0 3 2 5,000 750 90 0.06 x sqrt (freq) 500-60 55-000, 58-0000, 67-0000, 70-0000, 2.4.5+0.0 3 2 5,000 000 250 0.06 x sqrt (freq) 670-60 75-0000 93-RG78 2.4.20+0.03 4 2 5,000 500 25 0.5 x sqrt (freq) 335-60 54-RG22, 9-RG74, 94-RG79, 3-RG36, 2.4.5+0.03 4 2 5,000 750 90 0.5 x sqrt (freq) 500-60 52-0000 28-RG058, 60-RG42, 84-RG223, -RG303, 2.4.5+0.02 4 2 5,000 000 250 0.5 x sqrt (freq) 670-60 MIL-C-3902/56 28-RG400 69-0000 2.4.5+0.02 4 2 5,000 500 25 0.5 x sqrt (freq) 335-60 73-0000, 72-0000 57-0000 2.4.5+0.02 4 2 5,000 750 90 0.5 x sqrt (freq) 500-60 55-000, 58-0000, 67-0000, 70-0000, 2.4.5+0.02 4 2 5,000 000 250 0.5 x sqrt (freq) 670-60 75-0000 93-RG78 2.4.20+0.025 3 2 5,000 500 25 0.06 x sqrt (freq) 335-60 54-RG22, 9-RG74, 3-RG36 2.4.5+0.02 3 2 5,000 750 90 0.06 x sqrt (freq) 500-60 28-RG058, 60-RG42, 84-RG223, -RG303, 2.4.5+0.0 3 2 5,000 000 250 0.06 x sqrt (freq) 670-60 MIL-C-3902/57, 28-RG400 /58 & /59 69-0000 2.4.5+0.0 3 2 5,000 500 25 0.06 x sqrt (freq) 335-60 73-0000, 72-0000, 57-0000 2.4.5+0.0 3 2 5,000 750 90 0.06 x sqrt (freq) 500-60 55-000, 58-0000, 67-0000, 70-0000, 2.4.5+0.0 3 2 5,000 000 250 0.06 x sqrt (freq) 670-60 75-0000 MIL-C-3902/60, & /6 N/ N/ 3 2 5,000 000 250 N/ 670 N/ 33-RG405, 33-0000 Thru 33-000 Captive 8.07+0.0 3 2 5,000 000 250 0.03 x sqrt (freq) 670-90 30-RG402, 30-0000 Thru 33-00007 Captive 8.05+0.0 3 2 5,000 500 375 0.03 x sqrt (freq) 000-90 MIL-C-3902/79 33-RG405, 33-0000 Thru 33-000 8.07+0.008 3 2 5,000 000 250 0.03 x sqrt (freq) 670-90 Non-Captive 30-RG402, 30-0000 Thru 30-00007 8.05+0.008 3 2 5,000 500 375 0.03 x sqrt (freq) 000-90 Non-Captive MIL-C-3902/80 33-RG405, 33-0000 Thru 33-000 8.0+0.0 4 2 5,000 000 250 0.05 x sqrt (freq) 670-90 30-RG402, 30-0000 Thru 30-00007 8.0+0.0 4 2 5,000 500 375 0.05 x sqrt (freq) 000-90 33-RG405, 33-0000 Thru 33-000 Captive 8.07+0.0 3 2 5,000 000 250 0.03 x sqrt (freq) 670-90 30-RG402, 30-0000 Thru 33-00007 Captive 8.05+0.0 3 2 5,000 500 375 0.03 x sqrt (freq) 000-90 MIL-C-3902/8, 33-RG405, 33-0000 /82 & /83 Thru 33-000 8.07+0.008 3 2 5,000 000 250 0.03 x sqrt (freq) 670-90 Non-Captive 30-RG402, 30-0000 Thru 30-00007 8.05+0.008 3 2 5,000 500 375 0.03 x sqrt (freq) 000-90 Non-Captive MIL-C-3902/92 8.035+0.005 N/ 2 5,000 N/ 250 0.03 x sqrt (freq) 670-90 MIL-C-3902/93 & /94 8 N/ 3 2 5,000 000 250 N/ 670 N/ 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 70

Military Qualified Mechanical and Environmental Properties SM Connectors MIL-C-3902 (Continued) MIL Type Force to Coupling Coupling Recommended Engage Nut Proof Cable Retention Insertion Withdrawal Connector Mating (in-lbs) Retention Torque Lbs. Min. In.-Ounces Durability Torque (lbs.) (in-lbs) (in lbs.) 0.036 [0.9] 0 MIL-C-3902/55 2 max. 60 5 min. 0.067 [.70] 0.0 [2.79] 20 30 N/ N/ N/ 500 cycles min. 7-0 0.22 [3.0] 40 0.036 [0.9] 0 MIL-C-3902/56 2 max. 60 5 min. 0.067 [.70] 0.0 [2.79] 20 30 N/ N/ N/ 500 cycles min. 7-0 0.22 [3.0] 40 0.036 [0.9] 0 MIL-C-3902/57, /58 & /59 2 max. N/ N/ 0.067 [.70] 0.0 [2.79] 20 30 N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min. 7-0 0.22 [3.0] 40 MIL-C-3902/60, & /6 2 max. N/ N/ N/ N/ N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min. 7-0 MIL-C-3902/79 2 max. 60 5 min. 33-RG405, 33-0000 Thru 33-000 30 6 30-RG402, 30-0000 Thru 30-00007 60 55 N/ N/ 500 cycles min. 7-0 MIL-C-3902/80 2 max. 60 5 min. 33-RG405, 33-0000 Thru 33-000 30 6 30-RG402, 30-0000 Thru 30-00007 60 55 N/ N/ 500 cycles min. 7-0 33-RG405, 33-0000 30 6 MIL-C-3902/8, Thru 33-000 2 max. N/ N/ 2 lbs. max. w/ oz. min. w/ /82 & /83 30-RG402, 30-0000.0370 dia. pin.0355 dia. pin Thru 30-00007 60 55 500 cycles min. 7-0 MIL-C-3902/92 2 max. 60 5 min. N/ N/ N/ N/ N/ 00 cycles min. 7-0 MIL-C-3902/93 & /94 2 max. N/ N/ N/ N/ N/ 2 lbs. max. w/.0370 dia. pin oz. min. w/.0355 dia. pin 500 cycles min. 7-0 Environmental MIL Type Vibration Shock Thermal Shock Corrosion (Salt Spray) Moisture Resistance MIL-C-3902/55 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except THI 85C with 5 min. of removal from humidity MIL-C-3902/56 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 85C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/57, Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity /58 & /59 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 85C with 5 min. of removal from humidity MIL-STD-344 MIL-STD-344 MIL-STD-344 MIL-STD-344 MIL-STD-344, Method 002, Type II MIL-C-3902/60, Method 2005 Method 2004 Method 003 Method 00 No Measurement @ High Humidity & /6 Cond. IV Cond. G Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 200C with 5 min. of removal from humidity MIL-C-3902/79 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-C-3902/80 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/8, Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity /82 & /83 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-C-3902/92 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 5C with 5 min. of removal from humidity MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202, Method 06 MIL-C-3902/93 Method 204 Method 23 Method 07 Method 0 No Measurement @ High Humidity & /94 Cond. D Cond. Cond. Cond. Insulation Resistance 200 Megaohms No Discontinuity No Discontinuity Except T HI 25C with 5 min. of removal from humidity 702 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Connectors MIL-C-3902 For Flexible Cable MIL-C-3902/55 Plug.32 [7.92] [6.35] Outer Sleeve Plug.32 [7.92] Outer Sleeve Plug.32 [7.92] Crimp Sleeve.330 [8.38].72 [8.3] L Max..330 [8.38] L Max. Outline Outline 2.360 [9.4].00 [25.40] Outline 3.32 [7.92] L Max. Outline 4 Military MP M/-COM 6 RG/U Outline Cat. Cable Dim. L -3006 05757-203-8006-92 78.030 [26.6] -3007 05759-203-8007-92 74, 36.030 [26.6] -3008 05760-203-8008-92 2 22.030 [26.6] -3009 05762-203-8009-92 2 58, 42, 223.030 [26.6] -300 05763-203-800-92 2 303.030 [26.6] 30 05764-203-80-92 78 [3.75] 302 05766-203-802-92 2 74, 36 [3.75] 303 05767-203-803-92 2 22 [3.75] 304 05768-203-804-92 2 58 [3.75] 305 05769-203-805-92 2 42 [3.75] 306 05770-203-806-92 2 223 [3.75] 307 48454-203-807-92 2 303 [3.75] 308 0577-203-808-92 78.375 [34.93] 309 05643-203-809-92 74, 36.375 [34.93] 309 225532-4 2 4 74, 88,.950 [24.3] 88, 36 3020 05774-203-8020-92 2 22.375 [34.93] 302 05775-203-802-92 2 58.375 [34.93] 302 225532-2 4 58, 58,.030 [26.6] 58, 58C 3022 05776-203-8022-92 2 42.375 [34.93] 3022 225532-3 2 4 42, 42, 42,.030 [26.6] 400, elden 8442 3023 05777-203-8023-92 2 223.375 [34.93] 3023-225532-0 2 4 223, 55,.030 [26.6] 55, 55 3024 05778-203-8024-92 2 303.375 [34.93] 3024 225532-9 2 4 4, 4,.030 [26.6] 303-3025 05780-203-8025-92 C 78 [3.75] -3026 05782-203-8026-92 C 74, 36 [3.75] -3027 05783-203-8027-92 2 C 22 [3.75] -3028 05785-203-8028-92 2 C 42, 223 [3.75] -3029 05787-203-8029-92 2 C 58, 303 [3.75] *-306 05789-203-806-92 78.030 [26.6] Military MP * No safety wire holes. Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Use Integral Die Crimp Tool Part Number 22006-. 3 Crimp Tool M22520/5-0 and M22520/5-35 Closure. lternate Crimp Tool M22520/0-0 and M22520/0-3. 4 Crimp Tool M22520/5-0 and M22520/5-4 Closure. lternate Crimp Tool M22520/0-0 and M22520/0-7. 5 Crimp Tool M22520/5-0 and M22520/5-9 Closure. lternate Crimp Tool M22520/0-0 and M22520/0-2. 6-92 indicates passivated stainless steel finish. See page 7003 for description of categories and pages 7059-7064 for tooling (unless noted otherwise). M/-COM 6 RG/U Outline Cat. Cable Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Dim. L *-307 0579-203-807-92 74, 36.030 [26.6] *-308 05792-203-808-92 2 22.030 [26.6] *-309 05794-203-809-92 2 58, 42, 223.030 [26.6] *-30 05795-203-80-92 2 303.030 [26.6] *3 05796-203-8-92 78 [3.75] *32 05797-203-82-92 2 74, 36 [3.75] *33 05798-203-83-92 2 22 [3.75] *34 05799-203-84-92 2 58 [3.75] *35 05800-203-85-92 2 42 [3.75] *36 0580-203-86-92 2 223 [3.75] *37 05802-203-87-92 2 303 [3.75] *38 05803-203-88-92 78.375 [34.93] *39 05804-203-89-92 74, 36.375 [34.93] *320 05805-203-820-92 2 22.375 [34.93] *32 05806-203-82-92 2 58.375 [34.93] *322 05807-203-822-92 2 42.375 [34.93] *323 05808-203-823-92 2 223.375 [34.93] *324 05809-203-824-92 2 303.375 [34.93] *-325 0580-203-825-92 C 78 [3.75] *-326 0582-203-826-92 C 74, 36 [3.75] *-327 0583-203-827-92 2 C 22 [3.75] *-328 0585-203-828-92 2 C 42, 223 [3.75] *-329 0586-203-829-92 2 C 58, 303 [3.75] -3502 05788-203-8052-92 2 D 42, 400 [3.75] *-3602 0587-203-862-92 2 D 42, 400 [3.75] -4026 53229-5 3 3 C 74, 36 *-426 53229-6 3 3 C 74, 36-4027 53229-7 4 3 C 22 *-427 53229-8 4 3 C 22-4028 53229-9 5 3 C 42, 223 *-428-53229-0 5 3 C 42, 223-4029 -53229-5 3 C 58, 303 *-429-53229-2 5 3 C 58, 303 703 7RF Connectors

Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/56.67 [7.0].54 [3.7].330 [8.38].63 [6.0].50 [2.7].330 [8.38].705 Max..750 [7.9] Max. [9.05] Plug Plug.32 [7.92] Outer Sleeve L Max..32 [7.92] L Max..32 [7.92] L Max..32 [7.92] L Max. Outer Sleeve Outline Outline 2 Outline 3 Outline 4 Military MP M/-COM 3 RG/U Outline Cat. Cable Dim. L -3006 05249-2037-8006-92 78.25 [28.58] -3007 0525-2037-8007-92 74, 36.25 [28.58] -3008 05252-2037-8008-92 22.25 [28.58] -3009 05254-2037-8009-92 58, 42, 223.25 [28.58] -300 05255-2037-800-92 303.25 [28.58] 30 05256-2037-80-92 78 [3.75] 302 05257-2037-802-92 74, 36 [3.75] 303 05258-2037-803-92 22 [3.75] 304 05259-2037-804-92 58 [3.75] 305 05260-2037-805-92 42 [3.75] 306 0526-2037-806-92 223 [3.75] 307 05262-2037-807-92 303 [3.75] 308 05263-2037-808-92 78.375 [34.93] 309 05265-2037-809-92 74, 36.375 [34.93] 309 225609-4 2 3 74, 88,.87 [30.5] 88, 36 3020 05266-2037-8020-92 22.375 [34.93] 302 05267-2037-802-92 58.375 [34.93] 302 225609-2 4 58, 58, [3.75] 58, 58C 3022 05268-2037-8022-92 42.375 [34.93] 3022 225609-3 2 4 42, 42, 42, [3.75] 400, elden 8442 3023 05269-2037-8023-92 223.375 [34.93] 3024 05270-2037-8024-92 303.375 [34.93] -3025 0527-2037-8025-92 C 78.375 [34.93] -3026 05273-2037-8026-92 C 74, 36.375 [34.93] -3027 05274-2037-8027-92 C 22.375 [34.93] -3028 05276-2037-8028-92 C 42, 223.375 [34.93] * No safety wire holes. Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Use Integral Crimp Tool Part Number 22006-. 3-92 indicates passivated stainless steel finish. See page 7003 for description of categories and pages 7059-7064 for tooling (unless noted otherwise). Military MP M/-COM 3 RG/U Outline Cat. Cable Dim. L -3029 05277-2037-8029-92 C 58, 303.375 [34.93] *-306 05279-2037-806-92 78.25 [28.58] *-307 0528-2037-807-92 74, 36.25 [28.58] *-308 05282-2037-808-92 22.25 [28.58] *-309 05284-2037-809-92 58, 42, 223.25 [28.58] *-30 05285-2037-80-92 303.25 [28.58] *3 05286-2037-8-92 78 [3.75] *32 05287-2037-82-92 74, 36 [3.75] *33 05288-2037-83-92 22 [3.75] *34 05289-2037-84-92 58 [3.75] *35 05290-2037-85-92 42 [3.75] *36 0529-2037-86-92 223 [3.75] *37 05292-2037-87-92 303 [3.75] *38 05293-2037-88-92 78.375 [34.93] *39 05294-2037-89-92 74, 36.375 [34.93] *320 05295-2037-820-92 22.375 [34.93] *32 05296-2037-82-92 58.375 [34.93] *322 05297-2037-822-92 42.375 [34.93] *323 05298-2037-823-92 223.375 [34.93] *324 05299-2037-824-92 303.375 [34.93] *-325 05220-2037-825-92 C 78.375 [34.93] *-326 052203-2037-826-92 C 74, 36.375 [34.93] *-327 052204-2037-827-92 C 22.375 [34.93] *-328 052206-2037-828-92 C 42, 223.375 [34.93] *-329 052207-2037-829-92 C 58, 303.375 [34.93] -3502 05278-2037-8052-92 2 D 42, 400.375 [34.93] *-3602 086723-2037-862-92 2 D 42, 400.375 [34.93] 704 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/57.32 [7.92] [6.35] Outer Sleeve.32 [7.92] Outer Sleeve.59 [5.0] L Max. [6.35] L Max..53 [3.5] Outline Outline 2 Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L -3006 09074-2032-8006-92 78.960 [24.38] -3007 05900-2032-8007-92 74, 36.960 [24.38] -3008 0590-2032-8008-90 2 22.960 [24.38] -3009 05902-2032-8009-90 2 58, 42, 223.960 [24.38] -300 05903-2032-800-90 2 303.960 [24.38] 30 05904-2032-80-92 78.265 [32.3] 302 05905-2032-802-92 74, 36.265 [32.3] 303 05906-2032-803-92 2 22.265 [32.3] 304 05907-2032-804-92 2 58.265 [32.3] 305 05908-2032-805-92 2 42.265 [32.3] 306 05909-2032-806-92 2 223.265 [32.3] 307 0590-2032-807-92 2 303.265 [32.3] 308 059-2032-808-92 78.265 [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve. 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L 309 0592-2032-809-92 74, 36.265 [32.3] 3020 0593-2032-8020-92 2 22.265 [32.3] 302 0594-2032-802-92 2 58.265 [32.3] 3022 0595-2032-8022-92 2 42.265 [32.3] 3023 0596-2032-8023-92 2 223.265 [32.3] 3024 0597-2032-8024-92 2 303.265 [32.3] -3025 0598-2032-8025-92 C 78.265 [32.3] -3026 0599-2032-8026-92 C 74, 36.265 [32.3] -3027 05920-2032-8027-92 2 C 22.265 [32.3] -3028 0592-2032-8028-92 2 C 42, 223.265 [32.3] -3029 05922-2032-8029-92 2 C 58, 303.265 [32.3] -3502 05923-2032-8052-92 2 D 42, 400.265 [32.3] MIL-C-3902/58.02 [2.59] 4 Plcs..500 Sq. [2.70].340 [8.64] Typ..385 [9.78].065 [.65] L Max. Outer Sleeve.375 [9.53] L Max..065 [.65] [6.35] Outer Sleeve 7RF Connectors Outline 3 Outline 4 Military MP M/-COM 2 RG/U Outline Cat. Cable Dim. L -3006 052037-2036-8006-92 4 78.960 [24.38] -3007 052038-2036-8007-92 4 74, 36.960 [24.38] -3008 052039-2036-8008-90 3 22.960 [24.38] -3009 052040-2036-8009-90 3 58, 42, 223.960 [24.38] -300 05204-2036-800-90 3 303.960 [24.38] 30 052042-2036-80-92 4 78.265 [32.3] 302 254028-2036-802-92 4 74, 36.265 [32.3] 303 484499-2036-803-92 3 22.265 [32.3] 304 484500-2036-804-92 3 58.265 [32.3] 305 052043-2036-805-92 3 42.265 [32.3] 306 48450-2036-806-92 3 223.265 [32.3] 307 484502-2036-807-92 3 303.265 [32.3] 308 052044-2036-808-92 4 78.265 [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve. 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 2 RG/U Outline Cat. Cable Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Dim. L 309 484503-2036-809-92 4 74, 36.265 [32.3] 3020 484504-2036-8020-92 3 22.265 [32.3] 302 484505-2036-802-92 3 58.265 [32.3] 3022 052045-2036-8022-92 3 42.265 [32.3] 3023 484506-2036-8023-92 3 223.265 [32.3] 3024 484507-2036-8024-92 3 303.265 [32.3] -3025 052046-2036-8025-92 4 C 78.25 [28.58] -3026 052047-2036-8026-92 4 C 74, 36.25 [28.58] -3027 052048-2036-8027-92 3 C 22.25 [28.58] -3028 052049-2036-8028-92 3 C 42, 223.25 [28.58] -3029 052050-2036-8029-92 3 C 58, 303.25 [28.58] -3502 05205-2036-8052-92 3 D 42, 400.25 [28.58] 705

Military Qualified SM Connectors MIL-C-3902 For Flexible Cable (Continued) MIL-C-3902/59 +.004.28.000 + 0.0 [7.4 0.00] O-Ring Lockwasher.32 [7.92].437 [.0] [6.35] Outer Sleeve O-Ring Lockwasher.32 [7.92].437 [.0] [6.35] Outer Sleeve O-Ring Lockwasher.32 [7.92] Crimp Sleeve +.003.25.000 + 0.08 [3.8 0.00] Recommended Mounting Hole.055.03 [.40 2.62] Panel.450 [.43] L Max..055.03 [.40 2.62] Panel.450 [.43] L Max. Mtg. Nut.055.03 [.40 2.62] Panel.40 [0.44].93 Max. [23.62] Outline Outline 2 Outline 3 Military MP M/-COM 5 RG/U Outline Cat. Cable Dim. L -3006 0598-2034-8006-92 78.960 [24.38] -3007 05982-2034-8007-92 74, 36.960 [24.38] -3008 05983-2034-8008-90 2 22.960 [24.38] -3009 05984-2034-8009-90 2 58, 42, 223.960 [24.38] -300 05985-2034-800-90 2 303.960 [24.38] 30 36226-2034-80-92 78.265 [32.3] 302 05986-2034-802-92 74, 36.265 [32.3] 303 083993-2034-803-92 2 22.265 [32.3] 304 33293-2034-804-92 2 58.265 [32.3] 305 253627-2034-805-92 2 42.265 [32.3] 306 2265-2034-806-92 2 223.265 [32.3] 307 484542-2034-807-92 2 303.265 [32.3] 308 05987-2034-808-92 78.265 [32.3] 309 05988-2034-809-92 74, 36.265 [32.3] 3020 484543-2034-8020-92 2 22.265 [32.3] Category : solder sleeve; Categories, C and D: crimp sleeve. 2 Crimp tool M22520/5-0 and M22520/5-35 Closure. lternate crimp tool M22520/0-0 and M22520/0-3. 3 Crimp tool M22520/5-0 and M22520/5-4 Closure. lternate crimp tool M22520/0-0 and M22520/0-7. 4 Crimp tool M22520/5-0 and M22520/5-9 Closure. lternate crimp tool M22520/0-0 and M22520/0-2. 5-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling (unless noted otherwise). Military MP M/-COM 5 RG/U Outline Cat. Cable Dim. L 302 087842-2034-802-92 2 58.265 [32.3] 3022 05989-2034-8022-92 2 42.265 [32.3] 3023 05990-2034-8023-92 2 223.265 [32.3] 3024 0599-2034-8024-92 2 303.265 [32.3] -3025 05992-2034-8025-92 C 78.25 [28.58] -3026 05994-2034-8026-92 C 74, 36.25 [28.58] -3027 05995-2034-8027-92 2 C 22.25 [28.58] -3028 05996-2034-8028-92 2 C 42, 223.25 [28.58] -3029 05997-2034-8029-92 2 C 58, 303.25 [28.58] -3502 05998-2034-8052-92 2 D 42, 400.265 [32.3] -4026-53229-3 2 3 C 74, 36-4027 -53229-4 3 3 C 22-4028 -53229-5 4 3 C 42, 223-4029 -53229-6 4 3 C 58, 303 706 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Connectors MIL-C-3902 Panel Mount MIL-C-3902/60.02 [2.59] 4 Plcs..340 [8.64] Typ..500 Sq. [2.70].375 [9.52].58 [4.7].03 [0.78].050 [.27].065 [.65].223 [5.66].02 [2.59] 2 Plcs..48 [2.22].625 [5.88] Outline Outline 2.065 [.65].375 [9.53].58 [4.7].035 [0.89].050 [.27].62 [4.].035 [0.89] Max. Military MP M/-COM Outline -300 052924-2052-800-92 -3002 052926-2052-8002-92 2-92 indicates passivated stainless steel finish. MIL-C-3902/6 +.004.28.000 + 0.0 [7.4 0.00] O-Ring Lockwasher.32 [7.92].437 [.0].03 [0.79].437 [.0] O-Ring Lockwasher.32 [7.92].03 [0.79] +.003.25.000 + 0.08 [3.8 0.00] Typical Recommended Mounting Hole.045.03 [.4 2.62] Panel.500 [2.70].78 Max. [8.24] Outline 3.050 [.27].045.03 [.3 2.62] Panel.30 [7.87] Military MP M/-COM Outline -300 0538-2056-80-92 3-3002 48456-2058-802-92 4.550 [3.97].68 [7.3] Outline 4.050 [.27] 7RF Connectors -92 indicates passivated stainless steel finish. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 707

Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable MIL-C-3902/79.32 [7.92] Plug.32 [7.92] Plug.28 [5.54] Plug.32 [7.92].32 [7.92] Plug.330 [8.38].44 [.2] Outline.568 Max. [4.43].76 [9.3] Outline 2 Outline 3.544 Max. [4.07] Outline 4 Military MP M/-COM 4 RG/U Outline Category Cable 300 050774-200-800-92 405 3002 050776-200-8002-92 402 3003 050777-200-8003-92 3 405 3003 05083-200-899-92 2 405 3003 089686-2 200-8203-92 2 405 3004 050779-200-8004-92 3 402 3004 050792-2 200-8204-92 2 402-3007 05078-200-8007-92 3 E 405-3008 050783-200-8008-92 3 E 402 *30 050785-200-80-92 405 *302 050786-200-802-92 402 *303 050787-200-803-92 3 405 *303 050797-2 200-8303-92 2 405 *303 05082-200-898-92 2 405 MIL-C-3902/80 Plug.330 [8.38].67 [7.0].54 [3.7].32 [7.92] Outer Sleeve Outline 5 Military MP M/-COM 2 RG/U Outline Category Cable 300 0560-2007-800-92 5 405 3002 056-2007-8002-92 5 402 3003 0563-2007-8003-92 5 405 3004 0564-2007-8004-92 5 402-3005 0565-2007-8005-92 5 E 405-3006 0566-2007-8006-92 5 E 402-3007 0568-2007-8007-92 5 E 405-3008 0570-2007-8008-92 5 E 402 *30 057-2007-80-92 5 405 *302 0572-2007-802-92 5 402 * No safety wire holes. Use Hand Tool Kit Part Number 5998- which includes Die Set Part Number 32253- and Locator Part Number 3273-. 2-92 indicates passivated stainless steel finish. See page 7003 for description of categories and pages 7059-7064 for tooling 708 (unless noted otherwise). Military MP M/-COM 4 RG/U Outline Category Cable *303 227868-3 4 405 *304 050788-200-804-92 3 402 *304 050799-200-8304-92 2 402 *304 227743-3 4 402 *-307 050789-200-807-92 3 E 405 *-308 050790-200-808-92 3 E 402-3207 050793-200-8207-92 2 F 405-3207 228639-3 3 4 F 405-3208 050794-200-8208-92 2 F 402 *-3307 050800-200-8307-92 2 F 405 *-3307 228639-3 4 F 405 *-3308 05080-200-8308-92 2 F 402 *-3308 228634-3 4 F 402-33 050803-200-83-92 2 F 405 * No safety wire holes. Low profile version; overall length.393 [9.98] max. 2 OSCC solderless compression crimp version. 3 Use Hand Tool Kit Part Number 5998- which includes Die Set Part Number 32253-2 and Locator Part Number 22022-2. 4-92 indicates passivated stainless steel finish. See page 7003 for description of categories and pages 7059-7064 for tooling (unless noted otherwise). Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967.305 [7.75].520 [3.2] Max..32 [7.92].670 Max. [7.02] Outline 6.554 [4.07] Max. Military MP M/-COM 2 RG/U Outline Category Cable *303 0573-2007-803-92 5 405 *304 0574-2007-804-92 5 402 *-305 0575-2007-805-92 5 E 405 *-306 0576-2007-806-92 5 E 402 *-307 0577-2007-807-92 5 E 405 *-308 0578-2007-808-92 5 E 402-3207 228583-3 6 F 405 *-3307 228583-6 F 405-3308 228626-6 F 402

Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable (Continued) MIL-C-3902/8 [6.35].32 [7.92] [6.35].25 [3.8] Min..500 [2.70].235 [5.97].73 [8.].25 [3.8] Min..63 [6.03] Max..28 [5.54] Outline Outline 2 Outline 3 Military MP M/-COM 2 RG/U Outline Category Cable 300 050923-2002-800-90 405 3002 050924-2002-8002-90 402 3003 084643-2002-8003-92 2 405 3003 050932-2002-8203-92 3 405 3004 050925-2002-8004-92 2 402 3004 050933-2002-8204-92 3 402 OSCC solderless compression crimp version. 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 2 RG/U Outline Category Cable -3005 050926-2002-8005-90 E 405-3006 050928-2002-8006-90 E 402-3007 050929-2002-8007-92 2 E 405-3008 05093-2002-8008-92 2 E 402-3207 050934-2002-8207-92 3 F 405-3208 050935-2002-8208-92 3 F 402 MIL-C-3902/82.02 [2.59] 4 Plcs..30 [7.87].340 [8.64] Typ..500 Sq. [2.70].065 [.65].375 [9.53].565 Max. [4.35] Outline 4.065 [.65].375 [9.53].63 Max. [6.03].28 [5.54].065 [.65].375 [9.53].73 [8.] Outline 5 Outline 6.32 [7.92] 7RF Connectors Military MP M/-COM 2 RG/U Outline Category Cable 300 05087-2006-800-90 4 405 3002 05088-2006-8002-90 4 402 3003 05089-2006-8003-92 6 405 3003 05095-2006-8203-92 5 405 3004 05090-2006-8004-92 6 402 3004 05096-2006-8204-92 5 402 OSCC solderless compression crimp version. 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 2 RG/U Outline Category Cable -3005 0509-2006-8005-90 4 E 405-3006 05092-2006-8006-90 4 E 402-3007 05093-2006-8007-92 6 E 405-3008 05094-2006-8008-92 6 E 402-3207 05097-2006-8207-92 5 F 405-3208 05098-2006-8208-92 5 F 402 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 709

Military Qualified SM Connectors MIL-C-3902 For Semi-Rigid Cable (Continued) MIL-C-3902/83 +.004.28.000 + 0.0 [7.4 0.00] O-Ring Lockwasher.32 [7.92].437 [.0] O-Ring Lockwasher.32 [7.92].437 [.0] cross [6.35] Flats O-Ring Lockwasher.32 [7.92].437 [.0] +.003.25.000 + 0.08 [3.8 0.00] Recommended Mounting Hole.055.03 [.40 2.62] Panel.45 [0.54].500 [2.70].75 [9.0] Outline.055.03 [.40 2.62] Panel.450 [.43].850 Max. [2.59].055.03 [.40 2.62] Panel.45 [0.54].500 [2.70].652 Max. 2 [6.56] Outline 2 Outline 3.28 [5.54] Military MP M/-COM 3 RG/U Outline Category Cable 300 05022-2004-800-90 405 3002 05023-2004-8002-90 402 3003 05024-2004-8003-92 2 405 3003 05030-2004-8203-92 3 405 3004 05025-2004-8004-92 2 402 3004 0503-2004-8204-92 3 402 OSCC Solderless Compression Crimp version. 2 Category F Only: Overall Length;.620 [5.75] Max. 3-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 3 RG/U Outline Category Cable -3005 05026-2004-8005-90 E 405-3006 05027-2004-8006-90 E 402-3007 05028-2004-8007-92 2 E 405-3008 05029-2004-8008-92 2 E 402-3207 05032-, 2 2004-8207-92 3 F 405-3208 05033-, 2 2004-8208-92 3 F 402 MIL-C-3902/92 Plug.32 [7.92] Plug.32 [7.92].32 [7.92].33 [8.38].43.46 [3.63 3.7].4 [0.4].28 [5.54].368 Max. [9.35] Outline 4 Outline 5 Outline 6 Military MP M/-COM 3 RG/U Outline Category Cable 300 050805-200-890-92 4 402 300 050808-200-892-92 5 402 300 48457-200-894-92 4 402 *30 050807-200-89-92 4 402 *30 050809-200-893-92 5 402 * No safety wire holes. OSCC Solderless Compression Crimp version. 2 Use Hand Tool Kit Part Number 5998- which includes Die Set Part Number 32253- and Locator Part Number 220220-2. 3-92 indicates passivated stainless steel finish. See page 7003 for description of categories and pages 7059-7064 for tooling. Military MP M/-COM 3 RG/U Outline Category Cable *30 05080-200-895-92 4 402 30 22753-2 6 402-320 05079-200-820-92 5 F 402 *-330 050796-200-830-92 5 F 402-330 228635-2 6 F 402 7020 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Connectors MIL-C-3902 Printed Circuit Mount MIL-C-3902/93.065 [.65].375 [9.53].050 [.27].200 [5.08] Typ. [6.35] Sq. Outline.040 Sq. Typ. [.02] 4 Plcs. Military MP M/-COM Outline -300 053372-2062-800-90 -3002 053374-2062-8002-90 -3003 053376-2062-8003-90 -90 indicates gold plated finish. Dimension.55 3.94.25 3.8.093 2.36 MIL-C-3902/94 [6.35].583 [4.8].458 [.63].380 [9.65] Max..050 [.27] Outline 2 [6.35] Sq..040 Sq. Typ. [.02] 4 Plcs..200 [5.08] Typ. Military MP M/-COM Outline -300 053396-2064-800-90 2-3002 053398-2064-8002-90 2-3003 053400-2064-8003-90 2-90 indicates gold plated finish. Dimension.55 3.94.25 3.8.093 2.36 In-Series dapters MIL--55339 MIL--55339 Plug.635 Max. [6.3].50 Max. [2.95].330 [8.38].585 [4.86].459 [.66] Outline.32 [7.92].4.44 [3.58 3.66].375 [9.53].32 32, [7.92] UNEF-2 Thd..34.39 [7.98 8.0].055.90 [.40 4.83] Panel Recommended Mounting Hole.550 [3.97].875 [22.23] Outline 2 Lockwasher Gasket.325 [8.26].090 [2.29].500 [2.70] 7RF Connectors.32 [7.92] Typ. Plug.28 cross [5.54] Flats Plug.25 [3.8].02 [2.59] 4 Plcs..25 [3.8] Min..880 [22.35] Outline 3.500 [2.70] Outline 4.28 cross [5.54] Flats Military MP M/-COM Outline /02-3000 05509-2088-800-92 /28-3000 054986-2084-800-92 2 /28-30002 054988-2084-8002-92 5 /29-3000 053765-208-800-92 3 */29-300 053767-208-80-92 3 /3-3000 053633-2080-800-92 4 * No safety wire holes. -92 indicates passivated stainless steel finish..065 [.65].375 [9.53].720 [8.29] Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967.345 [8.76] Outline 5.340 [8.64] Typ..500 Sq. [2.70] 702

Military Qualified SM Receptacles MIL-C-8357 Panel Mount MIL-C-8357/.065 [.65].375 [9.53] [2.59] 2 Plcs. Tab Width.48 [2.22] +.002.005.00 + 0.05 [0.3 0.03 ] +.000.00.00 + 0.00 [2.54 0.25].02.2 [2.84].24 [6.].223 [5.66].625 [5.88].065 [.65].375 [9.53].02 [2.59] 4 Plcs. Tab Width +.002.005.00 + 0.05 [0.3 0.03] +.000.00.00 + 0.00 [2.54 0.25].70 [4.32] Typ..50 Sq. [2.95] Max..340 Typ. [8.64] Outline Outline 2 Military MP M/-COM Outline -300 052928-2052-8003-92 -3002 052930-2052-8004-92 -3003 052932-2052-8005-92 2-3004 052934-2052-8006-92 2 Dimension.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025 Military MP M/-COM Outline -3200 052927-2052-8003-90 -32002 052929-2052-8004-90 -32003 05293-2052-8005-90 2-32004 052933-2052-8006-90 2 Dimension.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. MIL-C-8357/2 Plug.32 [7.92] Ref. Plane.065 [.65].390 [9.9].528 [3.4] Max..02 [2.59] 2 Plcs. Tab Width +.002.005.00 + 0.05 [0.3 0.03].30 [3.30].00 ±.00 [2.54 ± 0.25].24 [6.].260 [6.60].48 [2.22].625 [5.88].02 [2.59] 4 Plcs..70.32 Typ. [4.32] [7.92] Tab Width Plug.340 [8.64] +.002.005 Typ..00 + 0.05 [0.3 0.03] Ref. Plane.065 [.65].390 [9.9].528 [3.4] Max..00 ±.00 [2.54 ± 0.25].50 Sq. [2.95] Max. Outline 3 Outline 4 Military MP M/-COM Outline -300 052409-205-800-92 3-3002 0524-205-8002-92 3-3003 05243-205-8003-92 4-3004 05245-205-8004-92 4 Dimension.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025 Military MP M/-COM Outline -3200 052408-205-800-90 3-32002 05240-205-8002-90 3-32003 05242-205-8003-90 4-32004 05244-205-8004-90 4 Dimension.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025.020 ±.002 0.5 ±.05.050 ±.00.27 ±.025-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. 7022 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Receptacles MIL-C-8357 Panel Mount (Continued) MIL-C-8357/3.065 [.65].375 [9.53].050 ±.00 [.27 ± 0.03] Slot Width.050 ±.00 [.27 ± 0.25] Slot Width.065 [.65].375 [9.53].630 ±.00 [6.00 ± 0.25].050 ±.00 [.27 ± 0.03].62 ±.002 [4. ± 0.05].00 ±.005 [2.54 ± 0.3].035 ±.00 [0.89 ± 0.25].02 [2.59] 2 Plcs..223 [5.66].24 [6.].2 [2.84].48 [2.22].625 [5.88] Outline Outline 2.02 [2.59] 4 Plcs..70 Slot Typ. [4.32] Width.340 [8.64] Typ..065 [.65].375 [9.53].050 ±.00 [.27 ± 0.25].050 ±.00 [.27 ± 0.25] Outline 3.50 Sq. [2.95] Max. Military MP M/-COM Outline -300 052936-2052-8007-92 -3002 052938-2052-8008-92 -3003 052940-2052-8009-92 -3004 052942-2052-800-92 3-3005 052944-2052-80-92 3-3006 052946-2052-802-92 3-3007 052948-2052-803-92 2 Dimension.02 +.003/.00 0.30 +0.08/ 0.03.08 +.003/.00 0.46 +0.08/ 0.03.028 +.003/.00 0.7 +0.08/ 0.03.02 +.003/.00 0.30 +0.08/ 0.03.08 +.003/.00 0.46 +0.08/ 0.03.028 +.003/.00 0.7 +0.08/ 0.03.025 ±.002 0.64 ±0.05 Military MP M/-COM Outline -3200 052935-2052-8007-90 -32002 052937-2052-8008-90 -32003 052939-2052-8009-90 -32004 05294-2052-800-90 3-32005 052943-2052-80-90 3-32006 052945-2052-802-90 3-32007 052947-2052-803-90 2 Dimension.02 +.003/.00 0.30 +0.08/ 0.03.08 +.003/.00 0.46 +0.08/ 0.03.028 +.003/.00 0.7 +0.08/ 0.03.02 +.003/.00 0.30 +0.08/ 0.03.08 +.003/.00 0.46 +0.08/ 0.03.028 +.003/.00 0.7 +0.08/ 0.03.025 ±.002 0.64 ±0.05 7RF Connectors -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7023

Military Qualified SM Receptacles MIL-C-8357 Panel Mount (Continued) MIL-C-8357/4.065 [.65].375 [9.53].080 ±.00 [27.43 ± 0.25].590 ±.00 [4.99 ± 0.25].050 ±.00 [.27 ± 0.03].62 ±.002 [4. ± 0.05].00 ±.002 [0.25 ± 0.05].085 ±.002 [2.6 ± 0.05].065 [.65].050 ±.00 [.27 ± 0.25].375 [9.53].02 [2.59] 4 Plcs..50 Max. [2.95] Sq..340 Typ. [8.64].70 [4.32] Typ. Outline Outline 2.00 ±.002 [0.25 ± 0.05].085 ±.002 [2.6 ± 0.05].065 [.65].050 ±.00 [.27 ± 0.25].375 [9.53] Outline 3.223 [5.66].02 [2.59] 4 Plcs..24 [6.].2 [2.84].48 [2.22].625 [5.88] Military MP M/-COM Outline Dimension -300 052950-2052-804-92 3.057 ±.003.45 ±.076.25 ±.003-3002 052952-2052-805-92 3 3.8 ±.076-3003 052954-2052-806-92 2.057 ±.003.45 ±.076-3004 052956-2052-807-92 2.25 ±.003 3.8 ±.076-3005 052958-2052-808-92 N/ -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. MIL-C-8357/5 Plug Ref. Plane.065 [.65].390 [9.9].528 Max. [3.4].997 Ref. [25.32] Military MP M/-COM Outline Dimension -3200 052949-2052-804-90 3.057 ±.003.45 ±.076.25 ±.003-32002 05295-2052-805-90 3 3.8 ±.076-32003 052953-2052-806-90 2.057 ±.003.45 ±.076-32004 052955-2052-807-90 2.25 ±.003 3.8 ±.076-32005 052957-2052-808-90 N/.62 ±.002 [4. ± 0.05].050 ±.00 [.27 ± 0.03].330 ±.00 [8.38 ± 0.25].490 ±.00 [2.45 ± 0.25] Outline 4.02 [2.59] 4 Plcs..50 Max. [2.95] Sq..70 Typ. [4.3].340 Typ. [8.64] 7024 Military MP M/-COM Outline -300 05247-205-8005-92 4-3200 05246-205-8005-90 4-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Receptacles MIL-C-8357 Surface Launch MIL-C-8357/6.085 [2.6].375 [9.53].050 ±.00 [.27 ± 0.03].072 ±.004 [.83 ± 0.0].00 ±.002 [0.25 ± 0.05].438 [.3] Outline.570 [4.48] Max..086 [2.8]-56, UNC-2 8 Plcs. Military MP M/-COM Outline -300 053423-2066-800-92 -3002 053425-2066-8002-92 -3200 053422-2066-800-90 -32002 053424-2066-8002-90 -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. Dimension.060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08.060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08 MIL-C-8357/7 Ref. Plane Plug.085 [2.6].390 [9.9].528 Max. [3.4].050 ±.00 [.27 ± 0.03].072 ±.004 [.83 ± 0.0].00 ±.002 [0.25 ± 0.05] Outline 2.570 [4.48] Max..086 [2.8]-56, UNC-2 8 Places.483 [.3] Military MP M/-COM Outline -300 053429-2067-800-92 2-3002 05343-2067-8002-92 2-3200 053428-2067-800-90 2-32002 053430-2067-8002-90 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish. Dimension.060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08.060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08 MIL-C-8357/8.480 Max. [2.9].340 [8.63].085 [2.6].00 ±.002 [0.25 ± 0.05].072 ±.004 [.83 ± 0.0].05 [0.38] Min. Mounting Plane.00 Max. [2.54].570 [4.48] Max..438 [.3] 7RF Connectors.475 [2.07] Max. See Detail.050 ±.00 [.27 ± 0.03].0355.0370 [0.902 0.940].05 Max..086 [2.8]-56, [0.38] Flat UNC-2 8 Places Detail Transition End Outline 3 Military MP M/-COM Dimension Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Outline -300 05345-2068-800-92 3-3002 053453-2068-8002-92 3-3200 053450-2068-800-90 3-32002 053452-2068-8002-90 3-92 indicates passivated stainless steel finish. -90 indicates gold plated finish..060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08.060 ±.003.52 ±0.08.20 ±.003 3.05 ±0.08 7025

Military Qualified SM Receptacles MIL-C-8357 End Launch MIL-C-8357/9.090 ±.003 Thru [2.29 ± 0.08] 2 Plcs..562 [4.27].375 [9.53] SC.230 [5.84].375 [9.53].09 [2.77] SC Mounting Hole Pattern Outline.375 [9.53].60 ±.00 [5.27 ± 0.25] +.002.005.00 + 0.05 Thick x [0.3 0.03].00 ±.00 [2.54 ± 0.25] Long x Tab Width.090 ±.003 Thru [2.29 ± 0.08] 2 Plcs..230 [5.84] +.000.005 + 0.00 [6.35 0.3].767 [9.48].580 [4.73] SC.00 [0.25].09 SC [2.77] Mounting Hole Pattern.375 [9.53].60 ±.00 [5.27 ± 0.25].375 [9.53] +.002.005.00 + 0.05 [0.3 0.03] Thick x.00 ±.00 [2.54 ± 0.25] Long x.050 ±.00 Tab Width [.27 ± 0.03] Outline 2 Military MP M/-COM Dimension Dimension Outline -300 053476-2070-800-92.057.064.025 ±.002.45.63 0.64 ±0.05-3002 053478-2070-8002-92.20.27.050 ±.00 3.05 3.23.27 ±0.03-3003 053480-2070-8003-92.245 6.22 6.35.050 ±.00.27 ±0.03-3004 053482-2070-8004-92 2 N/ N/ -3200 053475-2070-800-90.057.064.45.63.025 ±.002 0.64 ±0.05-32002 053477-2070-8002-90.20.27.050 ±.00 3.05 3.23.27 ±0.03-32003 053479-2070-8003-90.245 6.22 6.35.050 ±.00.27 ±0.03-32004 05348-2070-8004-90 2 N/ N/ -92 indicates passivated stainless steel finish. -90 indicates gold plated finish. 7026 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Military Qualified SM Receptacles MIL-C-8357 Field Replaceable Launchers MIL-C-8357/0.375 [9.53].02 [2.59] 2 Plcs..065 ±.00 [.65 ± 0.25].223 ±.00 [5.66 ± 0.25].2 [2.84].375 [9.53].065 ±.00 [.65 ± 0.25].50 Max. Sq. [2.95].480 [2.27].2405 [6.09].625 ±.00 [5.88 ± 0.25].70 [4.32] Typ..340 Typ. [8.63].02 [2.59] 4 Plcs. Outline Outline 2.00 ±.00 [2.54 ± 0.25].075 [.9].05 Max. [0.38] Flat.05 [0.38] Min. +.002.005.00 x + 0.05 ±.002 [0.3 0.03] [± 0.05].0355.0370 [0.902 0.940] Transition Pin Detail Military MP M/-COM Dimension Outline -300 052959-2052-809-92 -3003 052962-2052-802-92 2-3005 052963-2052-8023-92.020 ±.002 0.5 ±0.05-3006 48458-2052-8024-92.050 ±.002.27 ±0.05-305 48459-2052-8033-92 2.020 ±.002 0.5 ±0.05-306 484520-2052-8034-92 2.050 ±.002.27 ±0.05-3200 48452-2052-809-90 -32003 05296-2052-802-90 2-32005 484522-2052-8023-90.020 ±.002 0.5 ±0.05-32006 484523-2052-8024-90 -3205 484524-2052-8033-90 2-3206 484525-2052-8034-90 2-92 indicates passivated stainless steel finish. -90 indicates gold plated finish..050 ±.002.27 ±0.05.020 ±.002 0.5 ±0.05.050 ±.002.27 ±0.05 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7027

DSCC pproved SM Connectors for Semi-Rigid Cable Captured Center Contact.32 [7.92] Plug.223 [5.66].48.625 [2.22] [5.88].330 [8.38].440 [.7].065 [.65].375 [9.53].500 [2.70] Outline 66 Outline 67.02 [2.59] 2 Plcs..330 [8.38].680 [7.27].540 [3.72] Plug.32 [7.92].30 [7.87] Outline 68 DSCC M/-COM ssembly Part Number Part Number Outline Dim. Procedure 408- RG/U Cable MP Part Number 8449SSG 200-5397-02 66.80 4.57 4943 402 050605-8449SSG- 200-5557-02 66.80 4.57 4764 402 050629-8449SSG 200-543-02 66.20 3.05 405 050609-8449SSG- 200-5558-02 66.20 3.05 4765 405 05063-85022SSG 2006-55-00 67.80 4.57 402 05063-85022SSG- 2006-592-00 67.80 4.57 4767 402 2262-85022SSG 2006-550-00 67.20 3.05 4857 405 05062-85022SSG- 2006-593-00 67.20 3.05 4833 405 05067-85037SSG 2007-55-02 68.80 4.57 4830 402 059-85037SSG 2007-56-02 68.20 3.05 405 0520-7028 * Defense Electronics Supply Center, Dayton, Ohio Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

DSCC pproved SSM Connectors for Semi-Rigid Cable and Flexible Cable Non-Captured Center Contact [6.35].72 Min. [4.37] O-Ring Lock Washer [6.35].375 [9.53] [6.35] OSSM Plug.330 [8.38].467 [.86].88 Min. [4.78] OSSM Recommended Mounting Hole.450 [.43].555 [4.0].690 Max. [7.53].25 Max. [3.8] Panel OSSM Plug.330 [8.38].460 [.68].550 [3.97].20 [5.33] Outline 69 Outline 70 Outline 7 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 866ZSG 00-5045-92 69 4622 405 045358-867ZSG 004-5005-90 70 405 045398-868ZSG 007-505-92 7 4968 405 04548- Captured Center Contact OSSM Plug.330 [8.38].600 [5.24] [6.35] Typ..062 Max. [26.97].330 [8.38] OSSM Plug [6.35].500 [2.70].460 [.68].490 [2.45].900 [22.86] Max. 7RF Connectors.28 [32.54] Max. Outline 72 Outline 73 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 869ZSG 03-503-92 72 74, 36, 79 045486-8620ZSG 037-5032-92 73 4759 74, 36, 79 04557- * Defense Electronics Supply Center, Dayton, Ohio Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7029

DSCC pproved M lindmate Connectors for Semi-Rigid and Flexible Cable.280 [7.].560 ±.004 [4.22 ± 0.0] 2-56 UNC-2 Thd. 2 Plcs..020 Min. [0.5] Radial Float OSP +.002.377.00 + 0.05 [9.57 0.03] Recommended Mounting Hole.25 Max. [3.8] Panel.372 [9.45] Mounting Surface.065 [.65].70 [8.03].060 Min. [.52] xial Float.02 [2.59] 2 Plcs..560 [4.22].375 [9.53].750 [9.05].240 ±.00 [6.0 ± 0.03] OSP Plug.690 [7.53].477 [.35].065 [.65].437 [.0] +.00.242 O-Ring.000 + 0.03.32 [6.4 0.00].500 [7.92].25 Max. [2.70] Lockwasher [3.8] Panel Max. Recommended Mounting Surface Mounting Hole Outline 74 Outline 75.375 Max. [34.93] 2-56 UNC-2 Thd. 2 Plcs..280 [7.].560 ±.004 [4.22 ± 0.0].25 Max. [3.8] Panel.020 Min. [0.5] Radial Float +.002.377.00 + 0.05 [9.57 0.03] Recommended Mounting Hole.372 [9.45] OSP Mounting Surface.065 [.65].875 ±.020 [22.23 ± 0.5].400 [35.56] Max..060 Min. [.52] xial Float.02 [2.59] 2 Plcs..560 [4.22].380 [9.65].750 [9.05] +.00.242.000 + 0.03 [6.4 0.00].240 ±.00 [6.0 ± 0.03] OSP Plug Recommended Mounting Hole O-Ring.32 [7.92] Lockwasher.833 ±.020 [2.6 ± 0.5].477 [.35].065 [.65].32 [7.92].25 Max. [3.8] Panel Mounting Surface Outline 76 Outline 77 DSCC M/-COM ssembly Part Number Part Number Outline Procedure 408- RG/U Cable MP Part Number 8507ZSG 4506-505-02 74 8260 402 059424-8507ZSG 4506-506-02 74 8263 405 059426-85072ZSG 4503-5022-00 2 75 8259 402 059384-85072ZSG 4503-5023-00 2 75 8265 405 059386-85073ZSG 4536-5007-02 3 76 8266 79, 55, 87, 88, 36 059529-85073ZSG 4536-5008-02 3 76 8267 55, 42, 223, 400 059530-85074ZSG 4533-5007-02 3 77 827 79, 74, 87, 88, 36 05958-85074ZSG 4533-5008-02 3 77 8270 55, 42, 223, 400 05959- Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. 2 Finish: Housing that is soldered to cable outer conductor is gold plated. 3 Finish: Passivated stainless steel. For gold plate, change the Part Number suffix from -02 to -00. * Defense Electronics Supply Center, Dayton, Ohio 7030 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

DSCC pproved P Microminiature Push-On Coaxial Connectors for Semi-Rigid Cable Straight Cable Solder ttachment [6.4].35 Max. [3.4].33 [3.4] Right ngle Cable Solder ttachment EMI Ring nti-rock Ring DSCC M/-COM Part Number Part Number RG/U Cable MP Part Number 94008ZCG-2 2902-5005-62.047 Semi-Rigid 05652-94008ZCG- 2902-5006-62 RG-405 056522-.6 [4.] Max..230 [5.8] Max. nti-rock Ring EMI Ring.35 [3.4] Max. DSCC M/-COM Part Number Part Number RG/U Cable MP Part Number 94008ZCG-4 2908-5006-62.047 Semi-Rigid 056550-94008ZCG-3 2908-5007-62 RG-405 05655- to dapter (ullet).2525/.2555 [6.4 / 6.5].33 [3.4].35 Max. [3.4] DSCC M/-COM RG/U MP Part Number Part Number Cable Part Number 94007ZCG- 2980-5004-62 056703-7RF Connectors Shroud 2-Hole Flange Surface Mount C.20 [3.0].65 [4.2] D 2 Plcs..045 [.] DSCC M/-COM Dimension Dimension Dimension Dimension MP C D Part Number 94007ZSP-3 2998-5039-02.480 2.2.328 8.3.87 4.7.098 2.5 056740-94007ZSP-4 2998-5040-02.625 5.8.48 2.2.223 5.7.02 2.6 05674-94007ZSP-5 2998-504-02.400 0.2.282 7.2.65 4.2.073.9 056742- Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 703

DSCC pproved etween Series dapters TNC.437 [.0].87 cc. [4.75] Panel See Part Numbers TNC EMI Gasket Lockwasher.562 [4.27].093 [2.36].000 [25.40].32 [7.92].500 [2.70] Typ..687 [7.45] Sq..30 [33.27] Max [6.35] Panel.45 [0.54] Flat.656 [6.66] Outline 78 Outline 79 Type N Plug Plug.32 [7.92] Type N Plug.32 [7.92].668 [6.97].28 [32.54].562 [4.27].828 [2.03].279 [32.49].687 [7.45] Outline 80 Outline 8 Type N Type N Plug.232 [3.29] Outline 82.687 [7.45].668 [6.97].28 [32.54].562 [4.27].828 [2.03] Outline 83 DSCC M/-COM Part Number Part Number Outline Description MP Part Number 85084FP- 380-4034-02 78 SM to TNC 057848-85084FP-2 2 380-4036-02 2 78 SM to TNC 080294-85084FP-3 384-4002-02 79 SM to TNC 0579-860442SP- 38-4002-02 80 SM Plug to Type N Plug 0573-860442SP-2 3082-4022-02 8 SM Plug to Type N 057400-860442SP-3 3080-404-02 82 SM to Type N 057356-860442SP-4 3082-403-02 83 TNC Plug to SM 057403-.25 [3.20] Typ. (4 Plcs.) 2 Tapped holes to accommodate 3-56 UNF mounting screws. 7032 * Defense Electronics Supply Center, Dayton, Ohio Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

DSCC pproved etween Series dapters (Continued) Gasket Type N.630 [6.00] Max. See Part Numbers Mounting Nut.625-24 UNEF -2 Thd. Type N.53 cross [3.49] Flats Lockwasher.87 Max. [4.75] Panel.234 [3.34].79 Typ. [8.26].000 [25.40] Sq. Max. [6.35] Panel.867 [22.02].232 [3.29].867 [22.02].750 [9.05] Outline 83 Outline 84 Type N See Part Numbers.630 [6.00] Max..87 Max. [4.75] Panel.279 [32.49] Outline 85.79 [8.26] Typ..000 [25.40] Sq..32 [7.92] DSCC M/-COM Part Number Part Number Outline Description MP Part Number 850382FP- 3080-400-02 83 SM to Type N 057354-850382FP-2 2 3080-405-02 2 83 SM to Type N 057357-850382FP-3 3084-400-00 84 SM to Type N 057465-850382FP-4 3082-4028-02 85 SM Plug to Type N 057402-850382FP-5 2 3082-4029-02 2 85 SM Plug to Type N 252992-850382FP-6 3080-409-02 83 SM to Type N 057359-850382FP-7 2 3080-4020-02 2 83 SM to Type N 087866-.25 [3.20] Typ. (4 Plcs.) 2 Tapped holes to accommodate 3-56 UNF mounting screws. 7RF Connectors * Defense Electronics Supply Center, Dayton, Ohio Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7033

Coaxial Cable Termination One-Step NC/TNC Connectors Product Facts Easy, quick installation Outstanding cable-retention force Solder-solder connection type (center conductor and braid) One-step termination for easy, quick installation and lower installed cost Exceptional cable retention force to withstand high vibration and frequent mates and unmates Fully soldered center conductor and braid Excellent built-in strain relief against vibration and excessive handling Long-term reliability Controlled soldering termination Use with standard RG/U cables and Raychem Cheminax cables Three product sizes to accommodate a wide range of cables Meets performance requirements of MIL-C-3902 up to 2.8 GHz pplications One-Step NC/TNC connectors are single-piece assemblies for terminating the center conductor and the braid of a broad range of coaxial cables. The connectors are fully intermateable with MIL-C-3902 connectors and are available in 50-ohm and 75-ohm versions. Specifications Installation For proper installation of these devices, the correct heating tool and reflector Raychem attachment must be used. Refer to Raychem installation procedure R-5 ny one of the following Raychem RPIP 683-00 for detailed instructions. heating tools is recommended: Steinel Model HL802E CV-98 7034 METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287

Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) Product Options and Part Numbering System Connector Style Dash No. Style Connector Type RXX-XX-X-XX -XX TNC NC 24.5 Max. [.965] 24.5 max. [.965] -00 Straight plug 33.5 Max. [.32] 3.5 max. [.23] -0 Right-angle plug 28 [.09] 28 [.09] Male 25.4 max. [.0] 25.4 Max. [.0] -02 Straight bulkhead jack 25.4 max. [.0] 25.4 Max. [.0] -03 Straight jack 25.4 Max. [.0] 25.4 Max. [.0] Female -04 Straight panel jack Connector size L = Large M = Medium S = Small 50 = 50 ohms 75 = 75 ohms 4 x M2.5 x 0.45 4 x M2.5 x 0.45 7RF Connectors D = Nickel-plated brass body, gold-plated brass pin = NC T= TNC Example: RD-50-L-00 is a NC connector, 50 ohms, large size, with straight plug body. METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287 7035

Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) Product Characteristics Solder Transition Center Contact Dielectric Insulator Connector ody Insulation Sleeve Shield Insulation Sleeve and Solder Material Center contact Dielectric insulator Transition Connector body Solder and flux raided shield Insulation sleeve Strain relief/sealing sleeve Typical Performance Dielectric withstand voltage Insulation resistance Temperature rating Contact resistance-straight Contact resistance right-angle Cable retention force Voltage rating Connector durability Electrical Performance Nominal impedance Frequency range Gold-plated beryllium copper (female) Gold-plated brass (male) PTFE Silver-plated brass Nickel-plated brass Sn63Pb37, RM flux Tin-plated copper wire per STM 3 Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black 500 V 5000 megohms -55 C to 50 C [-67 F to 302 F] Inner =.5 milliohms, outer =.0 milliohm Inner = 2.5 milliohms, outer =.5 milliohms 295N (66 lb) to 822N (96 lb) 500 V RMS 500 mating cycles minimum 50 and 75 ohms Up to 2.8 GHz Part Selection Process. From Product Options and Dimensions on page 7035, select the connector style you need (NC or TNC, plug or jack, male or female contacts). 2. From the tables that follow, find the appropriate table for the connector style you selected. 3. From the appropriate table, select the connector part number based on the RG cable type or Raychem cable part number. For cable types not shown use the cable dimensions. Note: The cable dimensions in each table are keyed to the diagram below. D E F G 7036 METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287

Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) NC Coaxial Connectors Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) NC Straight Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.00 5 0.90-3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.26] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00.2.50 4.0 9.50 7.3 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] NC Right-ngle Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4. 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.50 0.9-3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 5243, 752837 3.50 7.00 2. 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00 2.50 4. 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] NC Straight ulkhead s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.00 5 0.90-3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00-2.50 4.0 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] NC Straight s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.50 0.90 3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00 2.50 4.0 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] NC Straight Panel s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.50 0.90 3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00 2.50 4.0 9.5o 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287 Part No. RD-50-S-00 RD-50-M-00 RD-50-L-00 RD-75-S-00 RD-75-M-00 RD-75-L-00 RD-50-S-0 RD-50-M-0 RD-50-L-0 RD-75-S-0 RD-75-M-0 RD-75-L-0 RD-50-S-02 RD-50-M-02 RD-50-L-02 RD-75-S-02 RD-75-M-02 RD-75-L-02 RD-50-S-03 RD-50-M-03 RD-50-L-03 RD-75-S-03 RD-75-M-03 RD-75-L-03 RD-50-S-04 RD-50-M-04 RD-50-L-04 RD-75-S-04 RD-75-M-04 RD-75-L-04 7037 7RF Connectors

Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) TNC Coaxial Connectors 2.7 [.5] = = RD-XX-X-04 RTD-XX-X-04 2.7 [.5] Panel thickness: 3.2 [.25] max. = =.2 [.44] 3 [.2] RD-XX-X -02 RTD-XX-X -02 20.5 [.8] min. 2 [.47] 8 [.7] min. 2.9 [.5] Hole Pattern for Panel-Mounted Products Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) TNC Straight ulkhead s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.5 7.0 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.0 2.5 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.5 5.5 0.90 3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.5 7.0 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.0 2.5 4.0 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] TNC Right-ngle Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.50 0.90 3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.0 2.5 4.0 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] Part No. RTD-50-S-02 RTD-50-M-02 RTD-50-L-02 RTD-75-S-02 RTD-75-M-02 RTD-75-L-02 RTD-50-S-0 RTD-50-M-0 RTD-50-L-0 RTD-75-S-0 RTD-75-M-0 RTD-75-L-0 7038 METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287

Coaxial Cable Termination One-Step NC/TNC Connectors (Continued) TNC Coaxial Connectors Cable Type Cable Dimensions Impedance D E F G (ohms) RG Cables Raychem Cables (Min. Max.) (Min. Max.) (Max.) (Max.) TNC Straight Plugs, Male Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.50 5.50 0.90 3.00.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.50 7.00 2.0 5.00 3.00.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.00 2.50 4.0 9.50 7.30 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.50 5.50 0.90-3.00.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.50 7.00 2.0 5.00 3.70.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.00 2.50 4.0 9.50 7.30 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] TNC Straight s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.5 5.5 0.9 3.0.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.5 7.0 2. 5.0 3.0.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.0 2.5 4. 9.5 7.3 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.5 5.5 0.9 3.0.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.5 7.0 2. 5.0 3.7.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.0 2.5 4. 9.5 7.3 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] TNC Straight Panel s, Female Contacts 50 RG-74, RG-78, RG-88, 50263, 502837,.5 5.5 0.9 3.0.55 0.65 RG-96,RG 36 503037 [.060.27] [.035.8] [.060] [.025] 50 RG-58, RG-4, RG-42, 509D338, 502D33, 3.5 7.0 2. 5.0 3.0.25 RG-303, RG-400 50203 [.38.276] [.083.97] [.8] [.050] 50 RG-65, RG-25, RG-23, 502F3332, 50233 5.0 2.5 4. 9.5 7.3 2.45 RG-225, RG-24 [.97.500] [.6.375] [.287] [.00] 75 RG-79, RG-87 753037.5 5.5 0.9 3.0.55 0.65 [.060.27] [.035.8] [.060] [.025] 75 75243, 752837 3.5 7.0 2. 5.0 3.7.25 [.38.276] [.083.97] [.46] [.050] 75 RG-6, RG-, RG-2, RG-59 5.0 2.5 4. 9.5 7.3 2.45 RG-44, RG-26 [.97.500] [.6.375] [.287] [.00] Part No. RTD-50-S-00 RTD-50-M-00 RTD-50-L-00 RTD-75-S-00 RTD-75-M-00 RTD-75-L-00 RTD-50-S-03 RTD-50-M-03 RTD-50-L-03 RTD-75-S-03 RTD-75-M-03 RTD-75-L-03 RTD-50-S-04 RTD-50-M-04 RTD-50-L-04 RTD-75-S-04 RTD-75-M-04 RTD-75-L-04 7RF Connectors METRIC Dimensions are millimeters over inches Catalog 308940 Dimensions are in millimeters Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 Revised 5-03 and inches unless otherwise reference purposes only. Canada: -905-470-4425 Japan: 8-44-900-502 specified. Values in brackets Specifications subject Mexico: 0-800-733-8926 Singapore: 65-4866-5 www.tycoelectronics.com are U.S. equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-793-5287 7039

P Microminiature Push-On Coaxial Connectors Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For P etween Series dapters, see page 7044. P microminiature push-on coaxial connectors provide solutions for today s modular designs with denser packaging requirements. The extremely small size of the P offers a versatile solution for high density packaging allowing connector center-to-center spacing of 0.7 [4.32]. The push-on interface facilitates easier assembly and test with a positive snap-in feature to indicate a fully mated connection. The rugged P interface can better withstand harsh environments of mechanical shock and vibration, typically found in military or aerospace related applications. This P connector interface is the standard used by Defense Electronics Supply Center (DSCC) to generate the SMP push-on connector series. P Shroud and -to- dapter ssembly P connectors can be your design solution for mechanical packaging and frequency response. The P interface provides 0.020" of radial misalignment for critical blindmate applications. Mating forces are strictly controlled for reliable connections per mated pair or when simultaneously mating multiple connectors. Cable jacks include an anti-rocking ring for reliable mechanical performance for harsh operating environments. P connectors offer enhanced broadband VSWR performance of VSWR.50:.40:.30:.20:.0:.5: max thru 26GHz and.40: max thru 40GHz. Standard design P configurations include cable connectors, straight and right-angle, for 0.047 and 0.085 semi-rigid cable, full detent, limited detent and smooth bore mating shrouds that can be bulkhead or flange mounted and glass feedthroughs for coax to circuit launchers. In-series adapters for module-to-module intermating and between series adapters for integrating or testing systems or components parameters. 0.0 8.0 6.0 24.0 32.0 40.0 GHz Typical VSWR for P -to- dapter Part Numbers 059829- and 05672-7040 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

P Microminiature Push-On Coaxial Connectors Introduction (Continued) Specifications General Materials and Finishes Housings and Center Contacts Dielectric Shrouds Hermetic Seal Electrical Frequency Range VSWR Voltage Rating Insertion Loss Insulation Resistance Dielectric Withstanding Voltage RF High Potential Impedance RF Leakage Contact Resistance eryllium Copper per STM--96; gold plate over nickel plate PTFE Fluorocarbon per STM-D-457 Stainless steel per STM-582 Type 303; passivate per STM-380 Glass bead dc - 40.0 GHz.0: Maximum dc - 23.0 GHz.5: Maximum 23.0-26.0 GHz.40: Maximum 26.0-40.0 GHz 335 Vrms maximum at sea level 0.0 f (GHz) maximum 5000 megohms minimum 500 volts (VRMS minimum) 325 volts (VRMS minimum) @ 5 MHz 50 ohms nominal -80d to 3 GHz, -65d from 3 to 26.5 d minimum Initial center contact 6.0 milliohms maximum Outer contact 2.0 milliohms maximum Mechanical Durability 00 mating cycles minimum Radial Misalignment ±0.020 minimum xial Misalignment.000/.00 Force to Engage full detent 5.0 lbs. maximum half detent 0.0 lbs. maximum smooth bore 2.0 lbs. maximum Force to Disengage full detent 5.0 lbs. minimum half detent 2.0 lbs. minimum smooth bore 0.5 lbs. minimum Center Contact Retention.5 lbs. minimum axial force Environmental Operating Temperature -85 F to +329 F [-65 C to +65 C] Vibration per mil-std-202, method 204, test condition D Shock per mil-std-202, method 23, test condition I Thermal Shock per mil-std-202, method 07, test condition Moisture Resistance per MIL-STD-202 method 06, except step 7b shall be omitted. Resistance shall be 200 megohms within 5 minutes after removal from humidity. 7RF Connectors Interface Dimensions Shroud EMI Ring.32 [3.40] Min. Full Detent.0 ±.002 [2.80 ±.050].45 [3.70] Max..35 [3.43] Max..42 ±.003 [8.60 ±.076] nti-rock Ring ullet.2 [2.80] Min. Smooth ore.35 [3.43] Max..25 ±.002 [3.20 ±.050] Note: The U.S. Government (DSCC) has determined that the above specified interface dimensions are interchangeable and intermateble with Gilbert GPO Series RF Connectors. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 704

P Microminiature Push-On Coaxial Connectors s Straight Cable, Solder ttachment [6.40].33 [3.40] Max..33 [3.40] EMI Ring nti-rock Ring Cable M/-COM (Ref. only) Part No..047 Semi-Rigid 2902-7947-62 056526-.085 Semi-Rigid (RG-405) 2902-7985-62 056527- Right-ngle Cable, Solder ttachment.6 [4.0] Max..230 [5.80] Max. EMI Ring nti-rock Ring.35 [3.40] Max. Cable Dim. Dim. M/-COM (Ref. only) Part No..047 Semi-Rigid.90 4.80.230 5.80 2908-7947-62 056553-.085 Semi-Rigid.209.265 (RG-405) 5.30 6.70 2908-7985-62 056554- to dapter (ullet).2525.2555 [6.40 6.50].33 [3.40].35 [3.40] Max. M/-COM Part (Ref. only) No. 2980-0000-62 059829-7042 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

P Microminiature Push-On Coaxial Connectors Shrouds Shroud Threaded.20 [3.00].60 [4.0] Max. Description M/-COM (Ref. only) Full Detent 2998-5045-02 056745- Limited Detent 2998-5043-02 056743- Smooth ore 2998-5044-02 056744- Shroud 2 Hole Flange Surface Mount C.20 [3.00].65 [4.20] D 2 Plcs..045 [.0] Description Dim. Dim. Dim. C Dim. D Full Detent Limited Detent Smooth ore.480.328.87.098 2.20 8.30 4.70 2.50.625.48.223.02 5.80 2.20 5.70 2.60.400.282.65.073 0.20 7.20 4.20.90.480.328.87.098 2.20 8.30 4.70 2.50.400.282.65.073 0.20 7.20 4.20.90.400.282.65.073 0.20 7.20 4.20.90 M/-COM (Ref. only) 2998-500-02 05672-2998-5002-02 056722-2998-5003-02 056724-2998-5028-02 056729-2998-5030-02 05673-2998-5049-02 056749-7RF Connectors Shroud Press Fit Description Full Detent Limited Detent Dim. Dim. M/-COM Part (Ref. only) No..82 4.60.5 2.90 2998-5005-02 056726-.74 4.40.20 3.00 2998-5033-02 056734-.54 3.90.080 2.00 2998-5035-02 056736- Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7043

P Microminiature Push-On Coaxial Connectors Shrouds (Continued) Shroud Solder-In Hermetic.080 [2.00].45 [3.70].40 [3.60].050 [.30].05 [0.40].098 [2.50] Description M/-COM (Ref. only) Full Detent 2998-5054-94 056750- Limited Detent 2998-5055-94 05675- Smooth ore 2998-5056-94 056752- Glass ead ssembly.05 [.400].063 [.60].25 [3.20].099 [2.50] M/-COM Part (Ref. only) No. 2998-5022-94 056728- etween Series dapters etween Series Coaxial Transmission Line dapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent with good electrical performance. The small size, low VSWR, and broad frequency coverage permits a wide range of applications in both measurement and systems use. SM Plug P Plug.690 [7.50] Ref. Part Number 056706- M/-COM (Ref. only) 298-224-00 SM P Plug SM P.498 [2.60].87 [4.70] Part Number 056702- M/-COM (Ref. only) 2980-2240-00 P SM Plug.560 [4.20] SM Plug.632 [6.00] Ref..32 [7.90] P Part Number 056707- M/-COM (Ref. only) 2982-2240-00 Part Number 056708- M/-COM (Ref. only) 2982-224-00 7044 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

M Microminiature Connectors Introduction The microminiature series has been developed to meet the increasing demand for smaller connector size. This series is small, but still very rugged for its relative size. The interface mating design insures precise outer shell alignment before engagement of the inner contacts. The M Series is compatible with smaller diameter semi-rigid cable. Design and Construction ll shell and body parts are made of stainless steel for ruggedness and long life. The dielectric is PTFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. The coupling thread is.38-40 UNF thread. Types The M Series connectors are available for appropriate size semi-rigid and flexible coaxial cables. Panel and bulkhead mount are also available to provide complete flexibility to component and system design. pplication Typical applications include requirements from low RF to high microwave frequencies. The higher order moding for this series is above 45.0 GHz, but the primary feature is the microminiature size. 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7045

M Microminiature Connectors Introduction (Continued) Interface Mating Dimensions Plug Weather Seal Gasket G D Reference Plane F E C.38-40, UNF-2 See Note.38-40, UNF-2 Reference Plane E F C D Dim. Min. Max..0930 2.36.0946 2.43.050 0.38.063 0.42 C 60 90 D.000 0.00.00 0.25 E.055.40.070.78 F.065.65.099 2.29 G.000 0.00.00 0.25 Dim. Min. Max..096 2.44.097 2.46.076.98.082 2.08 C.000 0.00.00 0.25 D.000 0.00.00 0.25 E.75 4.45 F.40 3.56. ID to meet VSWR and contact resistance when mated with.055 +.0008/-.0005 [0.0394 +.0203/-.027] dia. pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. Specifications Requirement MIL-C-3902 pplicable Paragraph Detail General Material 3.3 Steel corrosion resistant per STM--582 and STM--484, Type 303. eryllium copper per STM 96. PTFE Fluorocarbon per STM-D-457. Center contacts shall be gold plated to a min. thickness of.00005 [0.003] in accordance with Finish 3.3 MIL-G-45204, Typ I, Grade C. ll other metal parts shall be finished as to provide a connector which meets the corrosion requirements. Design 3.4 The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348 are met. Electrical Insulation Resistance 3. The insulation resistance shall not be less than 5,000 megohms. Corona Level 3.22 The connector shall not exhibit breakdown when the voltage is 50 volts rms at 70,000 ft. Dielectric Withstanding Voltage 3.7 The magnitude of the test voltage shall be 500 volts rms at sea level. RF HIgh Potential 3.23 The withstanding voltage is 375 volts rms at 5 MHz. Leakage current is not applicable. Contact Resistance 3.6 Center contact resistance: 3.5 milliohms max. Outer contact resistance: 2.8 milliohms max. VSWR 3.4 No military slash sheet applies. Consult factory. Frequency range dependent on cable used. RF Leakage 3.26 No military slash sheet applies. Consult factory. Insertion Loss 3.27 No military slash sheet applies. Consult factory. Frequency range dependent on cable used. Mechanical Force to Engage 3.5. The torque required to engage and disengage shall not exceed in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention 3.25 40 lbs. min. pplicable for plug connectors only. Coupling Proof Torque 3.6 4 in.-lbs. min. pplicable for plug connectors only. Cable Retention 3.24 No military slash sheet applies. Consult factory. pplicable to jack connectors only. Oversize pin.065 [0.49] min. dia.,.045 [.4] deep; insertion Mating Characteristics 3.7 force 3 lbs. max. with.063 [0.44] min. dia. pin; withdrawal force 0.5 oz. min. with.05 [0.38] max. dia. pin. The connector to be tested and its mating connector shall be subjected to 500 insertion and Connector Durability 3.5 withdrawal cycles at 2 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque 2 in.-lbs. Environmental Vibration 3.8 Specification MIL-STD-202, method 204, test condition D. Shock 3.9 Specification MIL-STD-202, method 23, test condition I. Thermal Shock 3.20 No military slash sheet applies. Consult factory. Corrosion (Salt Spray) 3.3 Specification MIL-STD-202, method 0, test condition. Moisture Resistance 3.2 Specification MIL-STD-202, method 06. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. 7046 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

M Microminiature Connectors For Flexible and Semi-Rigid Cables Straight Cable Plug M Plug.687 [7.45] Ref..87 [4.75] Heat Shrink Tubing* Cable ttachment Dim. M/-COM (Ref. only) Part Number RG 96/U Crimp.450 Flexible.40 Ref.. 403-796-00 059057-.047 * Direct.360 Semi-Rigid Solder 9.20 Ref.. 400-7947-00 058955- * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. Straight Cable M.87 [4.75] Cable ttachment Dim. M/-COM Part.650 [6.5] Ref. (Ref. only) Number.047 * Direct.330 Semi-Rigid Solder 8.40 Ref.. 4002-7947-00 058958- Heat Shrink Tubing* * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. ulkhead Feedthrough Cable.28 [3.25] Min..38 [3.5] Min..32 [7.92] Recommended Mounting Hole M.778 [9.76] Ref..87 [4.75] Ref..062 Max. [.57] Panel Heat Shrink Tubing* Cable ttachment Dim. M/-Com Part (Ref. only) Number RG 96/U Crimp.565 Flexible 4.40 Ref.. 4034-796-00 059060-.047 * Direct.458 Semi-Rigid Solder.60 Ref.. 4004-7947-00 058990- * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. Right-ngle Cable Plug M Plug.87 [4.75] Ref. Heat Shrink Tubing*.393 [9.98] Ref..323 [8.20] Ref..600 [5.24] Ref. Cable ttachment Dim. Dim. M/-Com Part Number (Ref. only).047 * Direct.256.78 Semi-Rigid Solder 6.50 Ref.. 4.50 Ref.. 4007-7947-00 058993- * Semi-rigid versions do not use heat shrink tubing. Finish: Gold plate. 7RF Connectors ulkhead Feedthrough.38 [3.5] Min..062 Max. [.57] Panel M.28 [3.25] Min..87 [4.75] Recommended Mounting Hole.438 [.3].358 [9.09].05 [0.38].030 [0.76].027 [0.69].037 [0.94] Description M/-COM Part Number (Ref. only) Captured Center Contact* Turret Terminal 4056-0000-00 059073- Rear Mount * Contact captivation per U.S. patent number 3,292,7. Finish: Gold plate. Printed Circuit oard Straight.95 [4.95].385 [9.78].55 [3.94].56 Sq. [3.96].00 [2.5] Typ. Description M/-COM Part Number (Ref. only) Captured Center Contact* Straight Terminal 4062-0000-00 05908- M.027.020 Sq. Typ. [0.69] [0.5] 4 Plcs. * Contact captivation per U.S. patent number 3,292,7. Finish: Gold plate. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7047

SSM Subminiature Coaxial Connectors Introduction The success of the SM connector created a need for a smaller version for reduced packaging requirements. The SSM series was designed to a size compatible with smaller diameter semi-rigid cable. The coupling thread is 0-36 UNS thread. Design and Construction s with the SM series, all shell and body parts are made of stainless steel for ruggedness and long life. The dielectric is solid PTFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. Types SSM connectors are available for both semi-rigid and flexible coaxial cable. Panel and bulkhead mount, strip transmission line type, microstrip transmission type and hermetically sealed connectors and in-series adapters give designers complete flexibility for component and system design. Upper Operating Frequency Limits The standard SSM series allows operation to 38.0 GHz. The extended frequency SSM series allows high order mode free operation beyond 40.0 GHz. The extended frequency series directly mates with the standard SSM series with minimum discontinuity. 7048 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

SSM Subminiature Coaxial Connectors Introduction (Continued) Interface Mating Dimensions D F G Plug H C Reference Note Note 2 C Reference Plane Note 2.90-36 D UNS-2 Thd. J G D H E.90-36 UNS-2 Thd. Note E F H J G Plug Plug Dim. Min. Max..96 4.98.202 5.3.24.27 3.5 3.22 C.00 2.54.33 3.38 D.000 0.00.007 0.25 E.050.065.27.65 F.000 0.00.00 0.25 G.020 0.50.02 0.53 H.000.00 0.00 0.25 J 70 95 Dim. Min. Max..53 3.89.60 4.06.27.30 3.23 3.30 C.075.9.077.96 D.000 0.00.007 0.25 E.020.040 0.5.02 F.075.9 G.000 0.00.00 0.25 H.90.20 4.83 5.33 J.230 5.84 7RF Connectors. ID to meet VSWR and contact resistance when mated with.020 +.0008/-.0005 [0.5 +.0203/-.027] dia. pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7049

SSM Subminiature Coaxial Connectors Introduction (Continued) Specifications General Materials Finishes Design Electrical Insulation Resistance Corona Level Dielectric Withstanding Voltage RF HIgh Potential Contact Resistance VSWR RF Leakage Insertion Loss Steel corrosion resistant per STM--582 and STM--484, Type 303. eryllium copper per STM 96. PTFE Fluorocarbon per STM-D-457. Center contacts shall be gold plated to a min. thickness of.00005 [0.003] in accordance with MIL-G-45204, Typ I, Grade C. ll other metal parts shall be finished as to provide a connector which meets the corrosion requirements. The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348 are met. The insulation resistance shall not be less than 5,000 megohms. The connector shall not exhibit breakdown when the voltage is 90 volts rms at 70,000 ft. The magnitude of the test voltage shall be 750 volts rms at sea level. The withstanding voltage is 500 volts rms at 5 MHz. Leakage current is not applicable. Center contact resistance: 2 milliohms max. Outer contact resistance: 2 milliohms max. Refer to applicable military slash sheet or consult factory. Frequency range dependent on cable used. Refer to applicable military slash sheet or consult factory. Refer to applicable military slash sheet or consult factory. Frequency range dependent on cable use. Mechanical Force to Engage The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is not applicable. Coupling Nut Retention 60 lbs. min. pplicable for plug connectors only. Coupling Proof Torque 5 in.-lbs. min. pplicable for plug connectors only. Cable Retention Refer to applicable military slash sheet or consult factory. pplicable to jack connectors only. Reference MIL-STD-348 for dimensions; oversize pin Mating Characteristics.02 [0.53] min. dia.,.045 [.4] deep; insertion force 3 lbs. max. with.0208 [0.528] min. dia. pin; withdrawal force oz. min. with.095 [0.495] max. dia. pin. The connector to be tested and its mating connector shall be subjected to 500 insertion and Connector Durability withdrawal cycles at 2 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. Recommended Mating Torque 5 in.-lbs. Environmental Vibration Specification MIL-STD-202, method 204, test condition D. Shock Specification MIL-STD-202, method 23, test condition I. Thermal Shock Refer to applicable military slash sheet or consult factory. Corrosion (Salt Spray) Specification MIL-STD-202, method 0, test condition. Moisture Resistance Specification MIL-STD-202, method 06. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. 7050 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

SSM Subminiature Coaxial Connectors For Semi-Rigid Cable.085 [2.6] Direct Solder ttachment Straight Cable Plug (Without Center Contact).330 Ref. [8.38] [6.35] M/-COM 00-7985-02 045370- MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE Electrical DC 40.0 GHz Straight Cable Plug (With Center Contact).330 Ref. [8.38] [6.35].20 [3.05] M/-COM MP Dim. Dim. RG/U Cable Cable Dielectric 00-5004-02 04535-.088.447 405 Solid 2.22 Min..35 Ref. PTFE Straight Cable (With Center Contact).500 [2.70].87 [4.75] M/-COM 002-7985-00 04538- MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE ulkhead Feed-through Cable.72 Min. [4.37].92 [4.88] Min. Recommended Mounting Hole [6.35] Lock Washer Gasket.685 [7.40].20 [3.05].25 Max. [3.8] Panel.375 [9.53] M/-COM 004-7985-00 04540- MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE 7RF Connectors Flange Mount Cable.500 [2.70].093 [2.36] 4 Plcs..20 [3.05].375 [9.53] Sq..232 [5.89] Typ. M/-COM 006-7985-00 04540- MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE Right-ngle Cable Plug.550 [3.97] Ref. [6.35] M/-COM 007-7985-02 045423- MP Dim. RG/U Cable Cable Dielectric.088 Min. 405 Solid 2.22 PTFE.20 [3.05] Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00. Inner housing that is soldered to cable is gold plated. Refer to recommended assembly tools in pplication Tooling Section. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 705

SSM Subminiature Coaxial Connectors Flexible Cable Solder ttachment Straight Cable Plug, 3 For Flexible Cable.330 [8.38] [3.75] Ref. Heat Shrink Tubing [6.35] M/-COM MP RG/U Cable 03-500-02 045477-78/U, 96 03-5002-02 045482-74/U, 79, 87, 88, 36 Straight Cable 3.87 [30.5] Ref. Heat Shrink Tubing.87 [4.75] M/-COM MP RG/U Cable 032-500-00 045496-78/U, 96 032-5002-00 045497-74/U, 79, 87, 88, 36 Finish: Gold plated. Inner housing that is soldered to cable is gold plated. Right-ngle Cable Plug.550 [3.97] Ref..330 [8.38].000 [25.40] Ref. [6.35] Heat Shrink Tubing M/-COM MP RG/U Cable 037-500-02 045508-78/U, 96 037-5002-02 0455-74/U, 79, 87, 88, 36 Flexible Cable Crimp ttachment Straight Cable Plug, 2.28 [32.54] Ref. M/-COM 03-788-02 045489- MP Dim. RG/U Cable.062 Ref. 74/U, 79, 26.97 87, 88, 36 Heat Shrink Tubing ulkhead Feed-through Cable, 2.77 Min. [4.50].92 Min. [4.88] Recommended Mounting Hole.400 Ref. [35.56].25 Max. [3.8] Panel Heat Shrink Tubing M/-COM 034-796-02 045506-034-788-02 045503- MP Dim. RG/U Cable.050 26.67 Ref 78/U, 96.80 29.97 Ref. 74/U, 79, 87, 88, 36 Right-ngle Cable Plug, 2.550 Ref. [3.97] Heat Shrink Tubing.900 [22.86] Ref. M/-COM 037-788-02 045520- MP Dim. Dim. RG/U Cable.625 Ref.525 Ref. 74/U, 79, 5.88 3.34 87, 88, 36 7052 Refer to recommended assembly tools in pplication Tooling Section.. Finish: Passivated stainless steel, -02. For gold plated coupling nut, change the Part Number suffix from -02 to -00. Inner housing that is soldered to cable is gold plated. 2. Captured contact. 3. Non-captured contact Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

SSM Subminiature Coaxial Connectors Panel Mount Receptacles Solder Pot Terminals Flange Mount Receptacle.575 [4.6].03 [0.79] Min..050 [.27].375 Sq. [9.53].093 [2.36] 4 Plcs. M/-COM MP 052-0000-00 045568- Flange Mount Receptacle.575 [4.6].0 [2.79].03 [0.79] Min..050 [.27].093 [2.36] 2 Plcs..87 [4.75].480 [2.9] M/-COM MP 052-300-02 045582- Flange Mount Receptacle.400 [0.6].645 [6.38].034 [0.86].02 [0.53] Min..0 [2.79].093 [2.36] 4 Plcs..375 [9.53] Sq. M/-COM MP 054-5005-02 04562- ulkhead Mount Receptacles Solder Pot Terminals ulkhead Feed-through Receptacles Rear Mount.600 [5.24].0 [2.79].093 Max. [2.36] Panel.02 [0.53] Min..034 [0.86].92 [4.88] Min..77 Min. [4.50] Recommended Mounting Hole M/-COM MP 056-0000-02 045630-7RF Connectors Rear Mount (With O Ring) Turret Terminal ulkhead Feed-through Receptacle Front Mount.600 [5.24].0 [2.79].600 [5.24].062 Max. [.57] Panel.02 [0.53] Min..034 [0.86].062 Max. [.57] Panel.050 [.27].92 [4.88] Min..77 Min. [4.50] Recommended Mounting Hole.77 Min. [4.50].0.92 [2.79] [4.88] Min. Recommended Mounting Hole M/-COM MP 056-00-02 045632- M/-COM MP 058-0000-02 045637- Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.. Captured Center Contact. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7053

SSM Subminiature Coaxial Connectors Panel Mount Receptacles Straight Terminal Flange Mount.0 Receptacle 2 [2.79].875 [22.23].034 [0.86].093 [2.36] 4 Plcs. M/-COM.375 Sq. [9.53] MP 052-200-2 045576-052-20-02 045578- Tab Terminal Flange Mount Receptacle 2.004 Thick [0.0] x.034 Wide [0.86].093 [2.36] 2 Plcs..480 [2.9] M/-COM MP 052-302-02 045586-.475 Ref. [2.07].87 [4.75] Printed Circuit oards Straight.530 [3.46].034 [0.86].040 Typ. Sq. [.02] 4 Plcs. [6.35] Sq. M/-COM MP 062-0000-00 045672- Finish: Gold plate. Right-ngle.499 [2.67].495 [2.57] [6.35] Sq..034 [0.86].040 Sq. Typ. [.02] 4 Plcs. M/-COM MP 064-0000-00 045677- Circuits Microstrip Transmission Line Circuits, Flange Mount Tab Terminal.005 [0.3] Thick.375 [9.53] Sq. M/-COM 052-32-00 045573- MP Dim. Dim..600 Ref..25 Ref. 5.24 3.8.85 [4.70].093 [2.36] 4 Plcs. Solderless Compression Terminal.093 [2.36] 2 Plcs..034 [0.86] M/-COM.480 [2.9].086 [2.8].375 [9.53].87 [4.75] MP 052-503-00 045607-7054 Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00.. Captured center contact. 2. Non-captured center contact. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

SSM Subminiature Coaxial Connectors Hermetically Sealed Metal-To-Metal Hermetic Seal Receptacle With EMI/RFI Gasket, Field Replaceable Solder and raze-in, 4 Electrical VSWR (GHz).07 +.0f RF Leakage (d) (00 fghz) EMI/RFI Gasket ccepts Contact.02 ±.00 [0.30 ± 0.03].0 Max..005 [2.79] Depth [0.3] Min..375 [9.53].322 [8.8].480.02 ±.00 [2.9] [0.30 ± 0.03].076 [.93].87 [4.75].093 [2.36] 2 Plcs. M/-COM MP 052-3355-02 045598- Feed-through Receptacle, Formable Gasket 2, 4 Electrical VSWR (GHz).05 +.0f RF Leakage (d) (00 fghz) Mechanical Installation Thermal Limit 250 C Formable Gasket.45 [.46].080 [2.03] +.00.62.002 + 0.03 [4. 0.05] [6.35] Recommended Mounting Hole +.00.2.000 + 0.03 [3.07 0.00] M/-COM MP 058-504-00 04565- Feed-through Receptacle, Solder and raze-in 3 Electrical VSWR (GHz).05 +.04f RF Leakage (d) (00 fghz).383 [9.73].060 [.53].02 [0.30].45 [3.68] M/-COM MP 058-3203-00 045647-7RF Connectors Panel Feed-through Receptacle, Solder and raze-in Electrical VSWR (GHz).05 +.04f RF Leakage (d) (70 fghz).400 [0.6].05 [0.38].5 [2.92].45 [3.68] M/-COM MP Dim. 058-32-00 045643-.093 2.36 058-322-00 045645-.25 3.8 058-323-00 045646-.87 4.75 Finish: Gold plate.. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00. 2. Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to -02. For nickel plate, change the suffix from -00 to -0. 3. Finish: Gold plate, -00. This unit has a unique self-matching compensation step, allowing direct attachment to the substrate, resulting in minimal package size. 4. Refer to recommended assembly tools in pplication Tooling section. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7055

SSM Subminiature Coaxial Connectors Hermetically Sealed (Continued) Panel Feed-through Hermetic dapter to -36, UNS-2.235 Min. [5.97].32 [7.92] Lockwasher Gasket.437 [.0] M/-COM MP 084-00-00 045725- Electrical VSWR (GHz).0 +.0f RF Leakage (d) (00 fghz).062 Max. [6.35] [.57] Panel Min..4 [0.44] Recommended Mounting Hole.229.060 [5.82] [.52] O-Ring Gasket Hermetic Seal Flange Mount Receptacle, 2 Electrical VSWR (GHz).05 +.0f RF Leakage (d) (70 fghz).375 [9.53] O-Ring.05 [0.38].45 [3.68].5 [2.92].093 [2.36] 4 Plcs..375 Sq. [9.53] M/-COM MP 052-32-00 045593- Dim..093 2.36 Rear Mount Receptacle, 2 Electrical VSWR (GHz).05 +.04f RF Leakage (d) (70 fghz).72 [4.37] Min..92 [4.88] Min..093 Max. [2.36] Panel Recommended Mounting Hole O-Ring [6.35].500 [2.70] Lockwasher.32 [7.92].05 [0.38].5 [2.92] M/-COM MP 056-300-00 045633- ulkhead Feed-through Front Mount Receptacle.32 [7.92] O-Ring.05 [0.38] M/-COM MP 058-300-00 045642- Electrical VSWR (GHz).05 +.0f RF Leakage (d) (70 fghz).475 [2.07].5 [2.92] 7056. Finish: Gold plate, -00. For passivated stainless steel, change the Part Number suffix from -00 to -02. 2. On passivated versions (-02), pins are pre-tinned using Sn60 solder. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

SSM Subminiature Coaxial Connectors In-Series dapters to dapter.500 [2.70].25 [3.8].56 cross [3.96] Flats M/-COM MP 080-0000-02 04570- Plug to Plug dapter.875 Ref. [22.23].25 [3.8].56 cross [3.96] Flats [6.35] M/-COM MP 08-0000-02 045704- Plug to dapter (Connector Saver).840 Ref. [2.34].25 [3.8].56 cross [3.96] Flats [6.35] M/-COM MP 082-0000-02 045708- ulkhead Mount to dapter.72 Min. [4.36] Recommended Mounting Hole.92 Min. [4.88].070 Max. [.78] Panel Lockwasher.700 [7.78] [6.35] M/-COM MP 084-0000-02 045723-7RF Connectors Right-ngle Plug to dapter.565 [4.35] Ref..523 [3.28] [6.35] M/-COM MP 088-0000-02 045747- Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7057

SSM Subminiature Coaxial Connectors.085 [2.6] and.070 [.78] Direct Solder ttachment Straight Cable Plug (Without Center Contact), 3 High Frequency For Semi-Rigid Cable Specifications Nominal Impedance 50 ohms Frequency Range dc to 40 GHz Voltage Standing Wave Ratio.07 +.00 f (GHz) Insertion Loss.04 x f (GHz) = d max. Voltage Rating 250 volts RMS max. working voltage.330 Ref. [8.38] [6.35] M/-COM MP Dim. RG/U Cable Cable Dielectric 00-7985-00 045369-.087 405 Solid 2.2 PTFE Straight Cable Plug Center Contact, 3 [6.35].20 [3.05] M/-COM MP Dim. Dim. RG/U Cable Cable Dielectric.088.447 40-7985-00 046477-405 Solid 2.22.35 PTFE Straight Cable 3.500 [2.70].20 [3.05].87 [4.75] M/-COM MP Dim. RG/U Cable Cable Dielectric 402-7985-00 046479-.088 2.22 405 Solid PTFE Finish: Gold plate. Panel Mount Straight Terminal Flange Mount Receptacle 2, 4.875 [22.23].00 [2.54].093 [2.36] 4 Plcs..03 [0.79].375 Sq. [9.53] M/-COM MP 452-20-02 402389-7058. Finish: Gold plated, -00. For passivated stainless steel coupling nut, change the Part Number suffix from -00 to -02. Inner housing that is soldered to cable is gold plated. 2. Finish: Passivated stainless steel, -02. For gold plate, change the Part Number suffix from -02 to -00. 3. Refer to recommended assembly tools in ppication Tooling Section. 4. Captured center contact. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

RF Connectors pplication Tooling Hand Tools MP CERTI-CRIMP Hand Tools are our top-of-the-line crimping tools featuring the original ratcheted crimp control. ll tools are designed to exacting specifications, and manufactured using high quality materials to provide long service life. Recommended for low production runs, repairs and prototype work, and applications requiring consistent, highly-reliable terminations. See Catalog 65780 for further information. Hand Tool Kit for SM and lindmate Connectors Part Number 5998- Typical CERTI-CRIMP Hand Tools with Integral (Non-Interchangeable) Dies Part Number 58537- (used with PRO-CRIMPER Tool Frame 354940-) for 50 Ohm NC Dual Crimp MIL Type Connectors Part Number 22005- for 50 Ohm N Connectors CERTI-CRIMP Hand Tool with Interchangeable Dies Part Number 6970 Part Numbers Item Description MP Military (M22520/) Hand Tool 59980-36-0 Plug Locator (without Center Contact) 220220-2 36-06 Plug Locator (with Center Contact) 22022-2 36-04 Locator 220222-2 36-05 Die Set for RG-402/U Cable (.4 [3.58] O.D.) 32253-36-03 Die Set for RG-405/U Cable (.086 [2.8] O.D.) 32253-2 36-02 Cutoff Fixture 3395-36-09 Cable Dressing Fixture 3396-36-07 Trimmer Tool 3237-36-08 Cable end Fixture ssembly Includes following 6 items: 220224-36-0 end Segment, RG-402/U (.25 [3.8] Radius) 3386-36- end Segment, RG-402/U ( [6.35] Radius) 3386-2 36-2 end Segment, RG-405/U 3386-3 36-3 Tool Holder 3392- Limiting Pin 30758- Conforming lock 32067- Hex Wrench 2027-6 Carrying Case 326- Insert, Case 327-7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7059

RF Connectors pplication Tooling (Continued) Solder ssembly Kit rass SM Connectors MP Kit Part Number 055420- M/-COM Kit Part Number 2098-5066-54 For installation of SM connectors to.035 [0.89] and.4 [3.58] diameter semi-rigid cable Inserts Locator Tools Dielectric Insert Tool Item Description MP M/-COM Center Contact Holder 055454-2098-522-0 Dielectric Insert Tool 055448-2098-525-02 055447-2098-524-02 Dielectric Recess Tool 055450-2098-527-54 Fixture Sub-ssembly 055439-2098-5206-54 Inserts.085 [2.6] (2) 05544-2098-5208-54 Inserts.4 [3.58] (2) 055440-2098-5207-54 055442-2098-5209-02 Locator Tool 055443-2098-520-02 055446-2098-523-02 05545-2098-528-02 Retainer Ring Pliers 055449-2098-526-54 Solder Gauge.00 [0.25] 9362-6 2098-556-02 Solder Gauge.05 [0.38] 9362-2098-522-02 Solder Gauge.08 [0.46] 9362-2 2098-52-02 Solder Gauge Fixture Sub-ssembly Retainer Ring Pliers Dielectric Recess Tool Center Contact Holder Universal Compression Crimp Tool MP Kit Part Number 055835- M/-COM Kit Part Number 2598-5200-54 MP Universal Compression Crimp Tool offers the ability to rapidly produce cable assemblies using solderless compression crimp connectors with semi-rigid cables. This universal assembly tool kit will attach SM, OSP, N and TNC series connectors to.4 [3.58],.085 [2.6] and [6.35] cable quickly and consistently with excellent mechanical and electrical results. The tool kit permits single hand assembly. nvils and cable supports can be quickly changed. Crimp lengths can be adjusted from.00 [.025] to.000 [25.4] in increments of.00 [.025]. Sharp radius bends in cables are easily accommodated. The kit contains: Cable Supports Crimp Frame Gauge Description MP M/-COM Crimp Frame 05583-2598-596-54 Calibration Gauge 055832-2598-597-54.4 [3.58] Cable Support 055833-2598-598-54.085 [2.6] Cable Support 055834-2598-599-54 SM Plug nvil 055836-2598-520-54 SM nvil 055837-2598-5202-54 Type N Plug nvil 055838-2598-5203-54 Type N nvil 055839-2598-5204-54 TNC Plug nvil 055840-2598-5205-54 TNC nvil 05584-2598-5206-54 OSP Plug nvil 055842-2598-5207-54 OSP nvil 055843-2598-5208-54 ll tools may be purchased separately. nvil 7060 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

RF Connectors pplication Tooling (Continued) MIL-C-22520/0-0 Equivalent Hex Crimp Kit MP Kit Part Number 055236- M/-COM Kit Part Number 2098-005-54 For military specified applications requiring quick and efficient cable to connector attachment. Five popular hex die sizes are available to crimp the outer cable conductor to connector housings. Crimp Tool Die Change Tool Hex Die The kit contains: Description MP Part Number M/-COM Part Number Crimp Tool 06073-9098-505-54 Die Change Tool 06076-5698-504-54 Hex Die,, C 06074-5698-505-54 Hex Die D, E 06075-5698-506-54 ll tools may be purchased separately. For the assembly of SM connectors, ccessory Kit Part Number 05542- is required. basic instruction sheet, included with the kit, aids in proper die selection MP M/-COM Hex Die Hex Die Die Hex Size For Use With Part Number Part Number ±.003 [0.08] RG/U Cable.05 2.67 78 & 96 06074-5698-505-54.23 5.4 55, 58C, 4, 42, 223, 303, & 400 C.28 3.25 74, 74, 79, 87, 88, & 36 06075-5698-506-54 D.78 4.52 80, 95, & 22 E.255 6.48 59, 62, 7, 20, & 302 dditional Dies vailable MP M/-COM Hex Die Hex Die Hex Size For Use With Part Number Part Number ±.003 [0.08] RG/U Cable.5 055270-2098-0323-54 3.84 RD36 Double raid 7RF Connectors SM Crimp Tool ccessory Kit MP Kit Part Number 05542- M/-COM Kit Part Number 2098-5067-54 For installation of SM connectors to flexible braided cable. Crimp type SM connectors require Hex Crimp Kit Part Number 055236-. The kit contains: Description MP Part Number M/-COM Part Number Center Contact Holder 055454-2098-522-0 Locator Tool 055446-2098-523-02 Locator Tool 05545-2098-528-02 Solder Gauge.05 [0.38] 9362-2098-522-02 ll tools may be purchased separately. Locator Tool Solder Gauge Center Contact Holder Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 706

RF Connectors pplication Tooling (Continued) Stripping Tools The hand-operated MP Coaxial Cable Stripper features interchangeable, color-coded blade cassettes and V-blocks to accommodate 2- or 3-step stripping for cable diameters ranging from 2.54 [.0] through 7.62 [.30]. You strip cable by simply clamping and rotating the tool around the cable. See Instruction Sheet IS 2766 for further information. Semi-Rigid Cable Tooling The tools listed here are designed specifically to strip and terminate semi-rigid cable. These tools operate basically the same as the flexible cable tools, in that they produce uniform terminations time after time, without heat damage from soldering. Hand Tool for NC and TNC Semi-Rigid Cable Connectors For Use With Connector Type Tool No. NC Single Crimp 603995- NC Commercial and UHF Miniature 603995-2 UHF Standard 603995-3 NC MIL Type Dual Crimp 603995-5 NC Commercial Dual Crimp 603995-6 Part Number 59980- Frame only does not include dies and locator Manual Trim and Point Tool Tyco Electronics offers a manual tool that performs both trimming and pointing operations. Tools are available for.4 [3.58] and.085 [2.6] diameter semi-rigid cable. These hand-operated tools are ideally suited for engineering, small production runs or field use. They feature tungsten carbide cutters for durability up to 30 times longer than the life of a high speed steel cutter. Replacement cutters are interchangeable and may be purchased separately. Replacement Cutters Trimmer: Part Number 05583- Pointer: Part Number 05584- MP Tool M/-COM Tool Part Number Part Number Cable Trim Length 0558-2598-56-54 RG-402/U.085 (.4 [3.58]) 2.6 Fixed 05585-2598-520-54 RG-405/U.070 (.085 [2.6]).78 Fixed 055823-2598-537-54 RG-402/U (.4 [3.58]) djustable* 055824-2598-538-54 RG-405/U (.085 [2.6]) djustable* *djustable trim length from.050 [.27] to.40 [3.56]. Replacement Collets MP Part Number M/-COM Part Number 055825-2598-545-54 055827-2598-567-54 Cable RG-402/U (.4 [3.58]) RG-405/U (.085 [2.6]) Cable enders for Semi-Rigid Cable Cable ender Description MP Part Number M/-COM Part Number end Radius* Cable ender for RG-405/U (.085 [2.6]) 055479-2098-5287-54 /4 [6.4] 3/8 [9.8] Cable ender for RG-402/U (.4 [3.58]) 055478-2098-5286-54 3/8 [9.8] /2 [2.7] *Radius of the bend is measured from the centerline of the cable. 7062 Trimming Tools for Semi-Rigid Cable For soldered semi-rigid cable connectors using the cable center conductor as its contact. These tools are optional for most installations but recommended for optimum connector performance. Trim Tool Description Trim Tool for SM Connectors RG-402/U (.4 [3.58]) Trim Tool for SSM Connectors RG-405/U (.085 [2.6]) MP Part Number M/-COM Part Number 055455-2098-5272-02 055465-2098-5269-02 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

RF Connectors pplication Tooling (Continued) Cable Trimmers for Production Tyco Electronics cable trimmers are designed for production trimming of RG-402/U (.4 [3.58]) and RG-405/U (.085 [2.6]) coaxial cables in preparation for connector installation. The trimming operation produces an unusually clean, burr-free cut with minimum smear. The length and depth of cut are adjustable. Replacement hardware can be used with either tool. Cable Trimmers Description MP Part Number M/-COM Part Number RG-402/U (.4 [3.58]) 055526-2098-5676-54 RG-405/U (.085 [2.6]) 055530-2098-5686-54 Replacement Hardware Description MP Part Number M/-COM Part Number Saw lade 055524-2098-5674-54 Trim Saw lock (.4 [3.58]) 055527-2098-5678-54 Trim Saw lock (.085 [2.6]) 055528-2098-5679-54 Cable Pointers for Production Tyco Electronics cable pointers are designed to point straight and bent cables and are adjustable for desired center conductor length. The cable pointers cut 90 point on copper as well as copper-clad center conductors. Interface Inspection Gauges Tyco Electronics offers Connector Interface Gauges. They have shock proof and fully jeweled dial indicators. The rugged construction of the dial mechanism minimizes the need for repair or replacement. The gauge heads are manufactured from a corrosion resistant, hardening stainless steel which is heat treated for longer life. ll critical surfaces are ground and lapped for precision fit and superior surface finish. The heads are securely fastened onto the dial indicator for no movement between the gauge head and the dial indicator Cable Pointers Description MP Part Number M/-COM Part Number Single Pointer 055525-2098-5675-54 Single Pointer 080269-2098-5685-54 spindle allowing for precise measurements. Like the gauge heads, the plungers are specially designed to provide strength and durability. MP Replacement Cutter Part Number M/-COM Replacement Cutter Part Number Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Cable RG-402/U (.4 [3.58]) RG-405/U (.085 [2.6]) MP Connector Type Gauge Kit Part Number SM 055529-2098-568-54 M/-COM Gauge Kit Part Number 055496-2098-5455-54 Plug 055497-2098-5456-54 SM Interface Example 7063 7RF Connectors

RF Connectors pplication Tooling (Continued) SSM Connectors MP Kit Part Number 055466- M/-COM Kit Part Number 2098-5270-54 For installation of SSM connectors to.070 [.78] and.085 [2.6] diameter semi-rigid cable. Inserts Dielectric Insert Tool Locator Tools Item Description MP M/-COM Center Contact Holder 055463-2098-5237-0 Dielectric Insert Tool 055458-2098-5233-02 055459-2098-5234-02 Dielectric Recess Tool 055460-2098-5235-54 Fixture Sub-ssembly 055439-2098-5206-54 Inserts.070 [.78] (2) 055547-2098-583-54 Inserts.085 [2.6] (2) 05544-2098-5208-54 05546-2098-5236-02 Locator Tool 055464-2098-5238-02 055456-2098-523-02 055457-2098-5232-02 Retainer Ring Pliers 055449-2098-526-54 Solder Gauge.05 [0.38] 9362-2098-522-02 ll tools may be purchased separately. Solder Gauge Fixture Sub-ssembly Retainer Ring Pliers Dielectric Recess Tool Center Contact Holder Econo-Crimp ssembly Kit MP Kit Part Number 055779- M/-COM Kit Part Number 2598-5005-54 For quick and efficient cable to connector attachment. Five popular hex die sizes are available to crimp the outer cable conductor to connector housings. Item Description MP M/-COM Crimp Tool 055780-2598-5006-54 Hex Die,, C 05578-2598-5007-54 Hex Die D, E 055782-2598-5008-54 ll tools may be purchased separately. For the assembly of SM connectors, ccessory Kit Part Number 2098-5067-54 is required. For SSM connectors, ccessory Kit Part Number 2098-5272-54 is required. Crimp Tool Hex Die MP M/-COM Hex Die Hex Die Part Number Part Number Die Hex Size ±.003 [0.08] For Use With RG/U Cable.05 2.67 78 & 96 05578-2598-5007-54.23 5.4 55, 58C, 4, 42, 223, 303, & 400 C.28 3.25 74, 74, 79, 87, 88, & 36 055782-2598-5008-54 D.78 4.52 80, 95, & 22 E.255 6.48 59, 62, 7, 20, & 302 7064 SSM Crimp Tool ccessories MP Kit Part Number 055467- M/-COM Kit Model Number T-550 For installation of SSM connectors to flexible braided cable. Crimp type SSM connectors require Hex Crimp Kit Part Number 055779-. Description Locator Tool MP Part Number Center Contact Holder M/-COM Part Number Center Contact Holder 055463-2098-5237-0 05546-2098-5236-02 Locator Tool 055464-2098-5238-02 ll tools may be purchased separately. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

RF Connectors Cross Reference Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/0002 225092-7 M3902/55305 203-805-92 05769- M3902/0003 5692-4 M3902/55306 203-806-92 05770- M3902/0007 225092-2 M3902/55307 203-807-92 48454- M3902/0008 225092- M3902/55308 203-808-92 0577- M3902/02008 225093-2 M3902/55309 225532-4 M3902/030004 225094-2 M3902/55309 203-809-92 05643- M3902/030005 225094- M3902/553020 203-8020-92 05774- M3902/050002 22504-2 M3902/55302 225532- M3902/050002 225389-2 M3902/55302 203-802-92 05775- M3902/050003 22504-3 M3902/553022 225532-3 M3902/60004 2-33350- M3902/553022 203-8022-92 05776- M3902/60007 2-33350-9 M3902/553023-225532-0 M3902/60008 33350 M3902/553023 203-8023-92 05777- M3902/70004 2-3335- M3902/553024 225532-9 M3902/70008 3335 M3902/553024 203-8024-92 05778- M3902/9-002 2233-2 M3902/553 203-8-92 05796- M3902/90003-33693- M3902/5532 203-82-92 05797- M3902/90007 33693 M3902/5533 203-83-92 05798- M3902/260005 225550-2 M3902/5534 203-84-92 05799- M3902/260006 225550-6 M3902/5535 203-85-92 05800- M3902/260007 225550-3 M3902/5536 203-86-92 0580- M3902/26006 225550- M3902/5537 203-87-92 05802- M3902/270005 22555-2 M3902/5538 203-88-92 05803- M3902/270006 22555-6 M3902/5539 203-89-92 05804- M3902/27005 22555-5 M3902/55320 203-820-92 05805- M3902/27006 22555- M3902/5532 203-82-92 05806- M3902/290005 225348-2 M3902/55322 203-822-92 05807- M3902/55-3006 203-8006-92 05757- M3902/55323 203-823-92 05808- M3902/55-3007 203-8007-92 05759- M3902/55324 203-824-92 05809- M3902/55-3008 203-8008-92 05760- M3902/56-3006 2037-8006-92 05249- M3902/55-3009 203-8009-92 05762- M3902/56-3007 2037-8007-92 0525- M3902/55-300 203-800-92 05763- M3902/56-3008 2037-8008-92 05252- M3902/55-3025 203-8025-92 05780- M3902/56-3009 2037-8009-92 05254- M3902/55-3026 203-8026-92 05782- M3902/56-300 2037-800-92 05255- M3902/55-3027 203-8027-92 05783- M3902/56-3025 2037-8025-92 0527- M3902/55-3028 203-8028-92 05785- M3902/56-3026 2037-8026-92 05273- M3902/55-3029 203-8029-92 05787- M3902/56-3027 2037-8027-92 05274- M3902/55-306 203-806-92 05789- M3902/56-3028 2037-8028-92 05276- M3902/55-307 203-807-92 0579- M3902/56-3029 2037-8029-92 05277- M3902/55-308 203-808-92 05792- M3902/56-306 2037-806-92 05279- M3902/55-309 203-809-92 05794- M3902/56-307 2037-807-92 0528- M3902/55-30 203-80-92 05795- M3902/56-308 2037-808-92 05282- M3902/55-325 203-825-92 0580- M3902/56-309 2037-809-92 05284- M3902/55-326 203-826-92 0582- M3902/56-30 2037-80-92 05285- M3902/55-327 203-827-92 0583- M3902/56-325 2037-825-92 05220- M3902/55-328 203-828-92 0585- M3902/56-326 2037-826-92 052203- M3902/55-329 203-829-92 0586- M3902/56-327 2037-827-92 052204- M3902/55-3502 203-8052-92 05788- M3902/56-328 2037-828-92 052206- M3902/55-3602 203-862-92 0587- M3902/56-329 2037-829-92 052207- M3902/55-4026 53229-5 M3902/56-3502 2037-8052-92 05278- M3902/55-4027 53229-7 M3902/56-3602 2037-862-92 086723- M3902/55-4028 53229-9 M3902/5630 2037-80-92 05256- M3902/55-4029 -53229- M3902/56302 2037-802-92 05257- M3902/55-426 53229-6 M3902/56303 2037-803-92 05258- M3902/55-427 53229-8 M3902/56304 2037-804-92 05259- M3902/55-428 -53229-0 M3902/56305 2037-805-92 05260- M3902/55-429 -53229-2 M3902/56306 2037-806-92 0526- M3902/5530 203-80-92 05764- M3902/56307 2037-807-92 05262- M3902/55302 203-802-92 05766- M3902/56308 2037-808-92 05263- M3902/55303 203-803-92 05767- M3902/56309 225609-4 M3902/55304 203-804-92 05768- M3902/56309 2037-809-92 05265-7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7065

RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/563020 2037-8020-92 05266- M3902/58305 2036-805-92 052043- M3902/56302 225609- M3902/58306 2036-806-92 48450- M3902/56302 2037-802-92 05267- M3902/58307 2036-807-92 484502- M3902/563022 225609-3 M3902/58308 2036-808-92 052044- M3902/563022 2037-8022-92 05268- M3902/58309 2036-809-92 484503- M3902/563023 2037-8023-92 05269- M3902/583020 2036-8020-92 484504- M3902/563024 2037-8024-92 05270- M3902/58302 2036-802-92 484505- M3902/563 2037-8-92 05286- M3902/583022 2036-8022-92 052045- M3902/5632 2037-82-92 05287- M3902/583023 2036-8023-92 484506- M3902/5633 2037-83-92 05288- M3902/583024 2036-8024-92 484507- M3902/5634 2037-84-92 05289- M3902/59-3006 2034-8006-92 0598- M3902/5635 2037-85-92 05290- M3902/59-3007 2034-8007-92 05982- M3902/5636 2037-86-92 0529- M3902/59-3008 2034-8008-90 05983- M3902/5637 2037-87-92 05292- M3902/59-3009 2034-8009-90 05984- M3902/5638 2037-88-92 05293- M3902/59-300 2034-800-90 05985- M3902/5639 2037-89-92 05294- M3902/59-3025 2034-8025-92 05992- M3902/56320 2037-820-92 05295- M3902/59-3026 2034-8026-92 05994- M3902/5632 2037-82-92 05296- M3902/59-3027 2034-8027-92 05995- M3902/56322 2037-822-92 05297- M3902/59-3028 2034-8028-92 05996- M3902/56323 2037-823-92 05298- M3902/59-3029 2034-8029-92 05997- M3902/56324 2037-824-92 05299- M3902/59-3502 2034-8052-92 05999- M3902/57-3006 2032-8006-92 09074- M3902/59-4026 -53229-3 M3902/57-3007 2032-8007-92 05900- M3902/59-4027 -53229-4 M3902/57-3008 2032-8008-90 0590- M3902/59-4028 -53229-5 M3902/57-3009 2032-8009-90 05902- M3902/59-4029 -53229-6 M3902/57-300 2032-800-90 05903- M3902/5930 2034-80-92 36226- M3902/57-3025 2032-8025-92 0598- M3902/59302 2034-802-92 05986- M3902/57-3026 2032-8026-92 0599- M3902/59303 2034-803-92 083993- M3902/57-3027 2032-8027-92 05920- M3902/59304 2034-804-92 33293- M3902/57-3028 2032-8028-92 0592- M3902/59305 2034-805-92 253627- M3902/57-3029 2032-8029-92 05922- M3902/59306 2034-806-92 2265- M3902/57-3502 2032-8052-92 05923- M3902/59307 2034-807-92 484542- M3902/5730 2032-80-92 05904- M3902/59308 2034-808-92 05987- M3902/57302 2032-802-92 05905- M3902/59309 2034-809-92 05988- M3902/57303 2032-803-92 05906- M3902/593020 2034-8020-92 484543- M3902/57304 2032-804-92 05907- M3902/59302 2034-802-92 087842- M3902/57305 2032-805-92 05908- M3902/593022 2034-8022-92 05989- M3902/57306 2032-806-92 05909- M3902/593023 2034-8023-92 05990- M3902/57307 2032-807-92 0590- M3902/593024 2034-8024-92 0599- M3902/57308 2032-808-92 059- M3902/60-300 2052-800-92 052924- M3902/57309 2032-809-92 0592- M3902/60-3002 2052-8002-92 052926- M3902/573020 2032-8020-92 0593- M3902/6-300 2056-80-92 0538- M3902/57302 2032-802-92 0594- M3902/6-3002 2058-802-92 48456- M3902/573022 2032-8022-92 0595- M3902/79-3007 200-8007-92 05078- M3902/573023 2032-8023-92 0596- M3902/79-3008 200-8008-92 050783- M3902/573024 2032-8024-92 0597- M3902/79-307 200-807-92 050789- M3902/58-3006 2036-8006-92 052037- M3902/79-308 200-808-92 050790- M3902/58-3007 2036-8007-92 052038- M3902/79-3207 228639-3 M3902/58-3008 2036-8008-90 052039- M3902/79-3207 200-8207-92 050793- M3902/58-3009 2036-8009-90 052040- M3902/79-3208 200-8208-92 050794- M3902/58-300 2036-800-90 05204- M3902/79-3307 228639- M3902/58-3025 2036-8025-92 052046- M3902/79-3307 200-8307-92 050800- M3902/58-3026 2036-8026-92 052047- M3902/79-3308 228634- M3902/58-3027 2036-8027-92 052048- M3902/79-3308 200-8308-92 05080- M3902/58-3028 2036-8028-92 052049- M3902/79-33 200-83-92 050803- M3902/58-3029 2036-8029-92 052050- M3902/79300 200-800-92 050774- M3902/58-3502 2036-8052-92 05205- M3902/793002 200-8002-92 058590- M3902/5830 2036-80-92 052042- M3902/793002 200-8002-92 050776- M3902/58302 2036-802-92 254028- M3902/793003 200-8003-92 050777- M3902/58303 2036-803-92 484499- M3902/793003 200-899-92 05083- M3902/58304 2036-804-92 484500- M3902/793003 200-8203-92 089686-7066 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M3902/793004 200-8004-92 050779- M3902/83-3208 2004-8208-92 05033- M3902/793004 200-8204-92 050792- M3902/83300 2004-800-90 05022- M3902/7930 200-80-92 050785- M3902/833002 2004-8002-90 05023- M3902/79302 200-802-92 050786- M3902/833003 2004-8003-92 05024- M3902/79303 227868- M3902/833003 2004-8203-92 05030- M3902/79303 200-803-92 050787- M3902/833004 2004-8004-92 05025- M3902/79303 200-8303-92 050797- M3902/833004 2004-8204-92 0503- M3902/79303 200-898-92 05082- M3902/92-320 200-820-92 05079- M3902/79304 227743- M3902/92-330 228635- M3902/79304 200-804-92 050788- M3902/92-330 228635-6 M3902/79304 200-8304-92 050799- M3902/92-330 200-830-92 050796- M3902/80-3005 2007-8005-92 0565- M3902/92300 200-892-92 050808- M3902/80-3006 2007-8006-92 0566- M3902/92300 200-890-92 050805- M3902/80-3007 2007-8007-92 0568- M3902/92300 200-894-92 48457- M3902/80-3008 2007-8008-92 0570- M3902/9230 22753- M3902/80-305 2007-805-92 0575- M3902/9230 200-89-92 050807- M3902/80-306 2007-806-92 0576- M3902/9230 200-893-92 050809- M3902/80-307 2007-807-92 0577- M3902/9230 200-895-92 05080- M3902/80-308 2007-808-92 0578- M3902/93-300 2062-800-90 053372- M3902/80-3207 228583-3 M3902/93-3002 2062-8002-90 053374- M3902/80-3207 228583-5 M3902/93-3003 2062-8003-90 053376- M3902/80-3307 228583- M3902/94-300 2064-800-90 053396- M3902/80-3308 228626- M3902/94-3002 2064-8002-90 053398- M3902/80-3308 228626-5 M3902/94-3003 2064-8003-90 053400- M3902/80300 2007-800-92 0560- M55339/02-3000 2088-800-92 05509- M3902/803002 2007-8002-92 056- M55339/28-3000 2084-800-92 054986- M3902/803003 2007-8003-92 0563- M55339/28-30002 2084-8002-92 054988- M3902/803004 2007-8004-92 0564- M55339/29-3000 208-800-92 053765- M3902/8030 2007-80-92 057- M55339/29-300 208-80-92 053767- M3902/80302 2007-802-92 0572- M55339/3-3000 208-800-92 053633- M3902/80303 2007-803-92 0573- M8357/-300 2052-8003-92 052928- M3902/80304 2007-804-92 0574- M8357/-3002 2052-8004-92 052930- M3902/8-3005 2002-8005-90 050926- M8357/-3003 2052-8005-92 052932- M3902/8-3006 2002-8006-90 050928- M8357/-3004 2052-8006-92 052934- M3902/8-3007 2002-8007-92 050929- M8357/-3200 2052-8003-90 052927- M3902/8-3008 2002-8008-92 05093- M8357/-32002 2052-8004-90 052929- M3902/8-3207 2002-8207-92 050934- M8357/-32003 2052-8005-90 05293- M3902/8-3208 2002-8208-92 050935- M8357/-32004 2052-8006-90 052933- M3902/8300 2002-800-90 050923- M8357/2-300 205-800-92 052409- M3902/83002 2002-8002-90 050924- M8357/2-3002 205-8002-92 0524- M3902/83003 2002-8003-92 084643- M8357/2-3003 205-8003-92 05243- M3902/83003 2002-8203-92 050932- M8357/2-3004 205-8004-92 05245- M3902/83004 2002-8004-92 050925- M8357/2-3200 205-800-90 052408- M3902/83004 2002-8204-92 050933- M8357/2-32002 205-8002-90 05240- M3902/82-3005 2006-8005-90 0509- M8357/2-32003 205-8003-90 05242- M3902/82-3006 2006-8006-90 05092- M8357/2-32004 205-8004-90 05244- M3902/82-3007 2006-8007-92 05093- M8357/3-300 2052-8007-92 052936- M3902/82-3008 2006-8008-92 05094- M8357/3-3002 2052-8008-92 052938- M3902/82-3207 2006-8207-92 05097- M8357/3-3003 2052-8009-92 052940- M3902/82-3208 2006-8208-92 05098- M8357/3-3004 2052-800-92 052942- M3902/82300 2006-800-90 05087- M8357/3-3005 2052-80-92 052944- M3902/823002 2006-8002-90 05088- M8357/3-3006 2052-802-92 052946- M3902/823003 2006-8003-92 05089- M8357/3-3007 2052-803-92 052948- M3902/823003 2006-8203-92 05095- M8357/3-3200 2052-8007-90 052935- M3902/823004 2006-8004-92 05090- M8357/3-32002 2052-8008-90 052937- M3902/823004 2006-8204-92 05096- M8357/3-32003 2052-8009-90 052939- M3902/83-3005 2004-8005-90 05026- M8357/3-32004 2052-800-90 05294- M3902/83-3006 2004-8006-90 05027- M8357/3-32005 2052-80-90 052943- M3902/83-3007 2004-8007-92 05028- M8357/3-32006 2052-802-90 052945- M3902/83-3008 2004-8008-92 05029- M8357/3-32007 2052-803-90 052947- M3902/83-3207 2004-8207-92 05032- M8357/4-300 2052-804-92 052950-7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7067

RF Connectors Cross Reference (Continued) Military Part Number M/-COM Part Number Tyco Part Number Military Part Number M/-COM Part Number Tyco Part Number M8357/4-3002 2052-805-92 052952- M8357/9-300 2070-800-92 053476- M8357/4-3003 2052-806-92 052954- M8357/9-3002 2070-8002-92 053478- M8357/4-3004 2052-807-92 052956- M8357/9-3003 2070-8003-92 053480- M8357/4-3200 2052-804-90 052949- M8357/9-3004 2070-8004-92 053482- M8357/4-32002 2052-805-90 05295- M8357/9-3200 2070-800-90 053475- M8357/4-32003 2052-806-90 052953- M8357/9-32002 2070-8002-90 053477- M8357/4-32004 2052-807-90 052955- M8357/9-32003 2070-8003-90 053479- M8357/4-32005 2052-808-90 052957- M8357/9-32004 2070-8004-90 05348- M8357/5-300 205-8005-92 05247- M8357/0-300 2052-809-92 052959- M8357/5-32002 205-8005-90 05246- M8357/0-3003 2052-802-90 05296- M8357/6-300 2066-800-92 053423- M8357/0-3003 2052-802-92 052962- M8357/6-3002 2066-8002-92 053425- M8357/0-3004 2052-8023-92 052963- M8357/6-3200 2066-800-90 053422- M8357/0-3005 2052-8023-92 052963- M8357/6-32002 2066-8002-90 053424- M8357/0-3006 2052-8024-92 48458- M8357/7-300 2067-800-92 053429- M8357/0-305 2052-8033-92 48459- M8357/7-3002 2067-8002-92 05343- M8357/0-306 2052-8034-92 484520- M8357/7-3200 2067-800-90 053428- M8357/0-3200 2052-809-90 48452- M8357/7-32002 2067-8002-90 053430- M8357/0-32005 2052-8023-90 484522- M8357/8-300 2068-800-92 05345- M8357/0-32006 2052-8024-90 484523- M8357/8-3002 2068-8002-92 053453- M8357/0-3205 2052-8033-90 484524- M8357/8-3200 2068-800-90 053450- M8357/0-3206 2052-8034-90 484525- M8357/8-32002 2068-8002-90 053452- P Cross Reference Tyco Part Number M/-COM Part Number 056526-2902 7947 62 056527-2902 7985 62 056553-2908 7947 62 056554-2908 7985 62 059829-2980 0000 62 056745-2980 2240 00 056743-298 224 00 056744-2982 2240 00 05672-2982 224 00 Tyco Part Number M/-COM Part Number 056722-2998 500 02 056724-2998 5002 02 056729-2998 5003 02 05673-2998 5005 02 056749-2998 5022 94 056726-2998 5028 02 056734-2998 5030 02 056736-2998 5033 02 056750-2998 5035 02 Tyco Part Number M/-COM Part Number 05675-2998 5043 02 056752-2998 5044 02 056728-2998 5045 02 056706-2998 5049 02 056702-2998 5054 94 056707-2998 5055 94 056708-2998 5056 94 SSM Cross Reference 7068 Tyco Part Number M/-COM Part Number 045370-00 5004 02 04535-00 7985 00 04538-00 7985 02 04540-002 7985 00 04540-004 7985 00 045423-006 7985 00 045477-007 7985 02 045482-03 500 02 045496-03 5002 02 045497-03 788 02 045508-032 500 00 0455-032 5002 00 045489-034 788 02 045506-034 796 02 045503-037 500 02 045520-037 5002 02 Tyco Part Number M/-COM Part Number 045568-037 788 02 045582-052 0000 00 04562-052 32 00 045630-052 200 2 045632-052 20 02 045637-052 300 02 045576-052 302 02 045578-052 32 00 045586-052 3355 02 045672-052 503 00 045677-054 5005 02 045573-056 0000 02 045607-056 00 02 045598-056 300 00 04565-058 0000 02 045647-058 300 00 Tyco Part Number M/-COM Part Number 045643-058 32 00 045645-058 322 00 045646-058 323 00 045725-058 3203 00 045593-058 504 00 045633-062 0000 00 045642-064 0000 00 04570-080 0000 02 045704-08 0000 02 045708-082 0000 02 045723-084 0000 02 045747-084 00 00 045369-088 0000 02 046477-40 7985 00 046479-402 7985 00 402389-452 20 02 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Introduction Product Facts Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series Temperature range -85 F to +257 F [-65 C to +25 C] (with neoprene gasket or bend relief cap) -80 F to 392 F [-62 C to +200 C] (with silicone gasket or bend relief cap) Dielectric Withstanding Voltage 000 volts RMS at sea level Contact Resistance 3 milliohms max., D.C. Captive Contacts Terminated connector contacts captivated from movement in both directions MICRODOT Standard Coaxial Connectors are designed to accept 50, 70, and 93 Ohm miniature coaxial cables. These connectors are available as Screw-On Series, Slide-On Series, or Quick-Connect Series. The Screw-On Series is intermateable with the Gold Plated Crimp Style Coaxial Connector Series and offers the dependability of a threaded coupling. For enhanced safety, choose connectors with wire holes. Choose Slide-On Series for the fastest, most convenient mating and unmating. The Quick-Connect Series offers the convenience of Slide-On coupling with added retention provided by a snap ring located on the jack/receptacle side. Consult Tyco Electronics for special cable accommodations and mounting features. 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7069

Coaxial Connectors Standard Connectors Performance Data Summary For Standard Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 50 Ohm connectors, 5 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 35 lb. min. Recommended Coupling Torque (Threaded Interface) 8 inch/pounds max. Recommended Receptacle Mounting Torque (ll Series) 8 inch/pounds max. Unmating Force (Slide-On Series) -7 pounds. Contact Protection (Unmated) Pin contact protected by coupling nut (threaded series) 2 or by housing (Quick- Connect and Slide-On Series). Socket protected by insulator and housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped to jerk ring (solder optional). ngle Plugs Cable Inner Conductor: Soldered to contact. Cable Shield: Soldered to ring & housing. Environmental Temperature Range (Continuous Service) -85 F to +257 F [-65 C to +25 C] (with Neoprene gasket or bend relief cap). -80 F to 392 F [-62 C to +200 C] (with Silicone gasket or bend relief cap). Vibration 3,4 MIL-STD-202, Method 204, Test condition (5 G peak). No physical damage or electrical discontinuities in excess of microsecond. Shock 3,4 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition. Moisture Resistance 3 MIL-STD- 202, Method 06. Salt Spray 3 MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 000 volts RMS at sea level. Contact Resistance 3 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 5 x 0 3 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio 5 (VSWR) Typical 50 Ohm series,.2 max. to 2 GHz. Materials Housing, Nut, Jerk Ring rass per STM--6. Insulator TEFLON per STM-D-70. Pin Contact (Plugs) rass per STM--6. Socket Contact (s & Receptacles) eryllium Copper per STM--96. end Relief Caps (Plugs & s) Neoprene or Silicone Rubber per ZZ-R-765. Gaskets (s & Receptacles) Neoprene or Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating Contacts Gold per MIL-G-45204, Type II, Grade C, Class. Housing, Nut, Jerk Ring, Lockwasher Silver per QQ-S-365, Type II, Grade,.0002 [.005] min. Notes: Termination to cables with foamed dielectrics excluded. Straight connector jerk rings must be soldered to cable shield. 2 Pin protector required. See individual connector specifications. 3 Screw-On Series, threaded interface. 4 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environment. See individual specifications for connectors with safety wire holes. 5 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On or Quick-Connect Series connectors and specify VSWR testing and mating connector part number. 7070 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Screw-On Series See page 706 for mating options. Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 032-002-000 032-000-000 032-00-000 032-0023-000 032-0022-000 032-007-000 032-0025-000 032-0067-000 032-0066-000 032-0033-000 032-0078-000 032-007-000 032-0097-000 032-0222-000 032-0092-000 032-0098-000 052-0092-000 032-0099-000 032-055-000 052-0200-000 032-056-000 052-023-000 052-0235-000 052-0235-0003 052-0370-000 052-0542-000 S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-0034-000 03-0036-000 03-0037-000 05-0467-000 03-0090-000 03-0088-000 ulkhead S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-0033-000 03-0048-000 03-0032-000 03-0089-000 Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-0050-000 03-005-000 03-0052-000 05-038-000 Right-ngle Plug S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 032-005-000 032-003-000 032-004-000 052-0204-000 052-0299-000 032-0068-000 052-025-000 052-0379-000 032-053-000 052-0337-000 052-0207-000 052-0298-000 052-0304-0022 Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-000-000 03-007-000 03-006-000 03-000-0003 03-008-000 03-009-000 03-0002-000 03-0046-000 03-0003-000 03-0024-000 05-025-000 7RF Connectors Printed Circuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-0059-000 03-0069-000 03-0067-000 03-0062-000 03-0080-000 05-0450-000 Right-ngle Printed Circuit Receptacle S-50 Ohm Series S-70 Ohm Series S-93 Ohm Series 03-006-000 03-0072-000 03-0073-000 05-0459-000 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 707

Coaxial Connectors Standard Connectors Screw-On Series (Continued) Plugs S-50, 70 & 93.030.033 [.762.838] Pin Pin Protector Dim. Dim. Cable et Instruction Former ssembly Max. Special Features Sheet No. MICRODOT I.S. No. Tool S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread 032-002-000.745.230.087 8.92 5.84 2.2 Solderless ssembly 408-0852 RF-SM-88 00-0003-0000.745.230 032-0023-000.087 8.92 5.84 2.2 408-08522 RF-SM-89 00-0003-0000.745.230 032-0025-000.093 8.92 5.84 2.36 Solderless ssembly 408-0852 RF-SM-88 00-0003-0000.745.230 032-0033-000.093 8.92 5.84 2.36 408-08522 RF-SM-89 00-0003-0000.745 032-0097-000.087 8.92 6.35 2.2 Solderless ssembly, Hex Nut 408-0852 RF-SM-88 00-0003-0000 032-0098-000.745.087 8.92 6.35 2.2 Hex Nut 408-08522 RF-SM-89 00-0003-0000 032-055-000,.700.088 2 Hex Nut,.87 [4.75] 7.78 6.35 2.24 Hex Cable Clamp Nut 408-08522 RF-SM-89 00-0003-0000 032-056-000,.700.088 2.87 [4.75] 7.78 6.35 2.24 Hex Cable Clamp Nut 408-08522 RF-SM-89 00-0003-0000 052-023-000.745.087 Solderless, Hex Nut w/ Safety 8.92 6.35 2.2 Wire Holes,.02 [0.53] Wire Max. 408-0852 RF-SM-88 00-0003-0000.745 052-0235-000.087 8.92 6.35 2.2, 2 Hex Nut 408-08522 RF-SM-89 00-0003-0000 052-0235-0003,.745.087 2 Hex Nut w/ Safety Wire Holes, 8.92 6.35 2.2.02 [0.53] Wire Max. 408-08522 RF-SM-89 00-0003-0000 052-0370-000.745.093 Hex Nut, Designed for 8.92 6.35 2.36 Dual Shield Cable 408-08522 RF-SM-89 00-0003-0000.745 052-0542-000.087 8.92 6.35 2.2 Hex Nut 408-08522 RF-SM-89 00-0003-0000 S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread 032-000-000.760.255.093 9.30 6.48 2.36 Solderless ssembly 408-0852 RF-SM-88 00-0004-0000.760.255 032-0022-000.093 9.30 6.48 2.36 408-08525 RF-SM-95 00-0004-0000.755.255 032-0067-000.08 9.8 6.48 2.74 408-08522 RF-SM-89 00-0035-0000.755.255 032-0078-000.08 9.8 6.48 2.74 Solderless ssembly 408-0852 RF-SM-88 00-0035-0000 032-0222-000.760.28.093 Hex Nut w/ Safety Wire Holes, 9.30 7.4 2.36.04 [0.35] Wire Max. 408-08525 RF-SM-95 00-0004-0000.760.255 052-0092-000.093 9.30 6.48 2.36 2 408-08525 RF-SM-95 00-0004-0000 S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread 032-00-000.760.320.34 9.30 8.3 3.40 Solderless ssembly 408-0852 RF-SM-88 00-0005-0000.760.320 032-007-000.34 9.30 8.3 3.40 408-08525 RF-SM-95 00-0005-0000.950.350 032-0066-000.54 24.3 8.89 3.9 Silicone end Relief Cap 408-08523 RF-SM-90 032-007-000.760.320.34 Cable Inner Conductor, 9.30 8.3 3.40.03 [0.78] Max. 408-08525 RF-SM-95 00-0005-0000.760.320 032-0092-000.55 9.30 8.3 3.94 408-08525 RF-SM-95 00-0044-0000.760.32.34 032-0099-000 9.30 7.92 3.40 Hex Nut 408-08525 RF-SM-95 00-0005-0000 052-0200-000.760.32.34 Hex Nut w/ Safety Wire Holes, 9.30 7.92 3.40.05 [0.38] Wire Max. 408-08525 RF-SM-95 00-0005-0000 Pin protected. 2 Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength. 7072 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Screw-On Series (Continued) Right-ngle Plugs S-50, 70 & 93 C NGLE PLUG Dim. Dim. Dim. Cable C et Max. S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread 032-005-000.735.225.570.092 8.67 5.72 4.48 2.34.735.570.092 052-0204-000 8.67 6.35 4.48 2.34 052-025-000.735.570.092 8.67 6.35 4.48 2.34.745.225 052-0337-000.570. 8.92 5.72 4.48 2.82 S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread 032-003-000.745.255.570. 8.92 6.48 4.48 2.82 052-0299-000.745.28.570. 8.92 7.4 4.48 2.82.745.28 052-0379-000.570. 8.92 7.4 4.48 2.82 S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread 032-004-000.745.320.630.34 8.92 8.3 6.00 3.40.745.320 032-0068-000.630.55 8.92 8.3 6.00 3.94.745.32.630.55 032-053-000 8.92 7.92 6.00 3.94.745.32 052-0207-000.630.34 8.92 7.92 6.00 3.40 052-0298-000 052-0304-0022.745.32.630.34 8.92 7.92 6.00 3.40.745.32.630.55 8.92 7.92 6.00 3.94 Special Features Instruction Sheet No. Former MICRODOT I.S. No. ssembly Tool 408-08520 RF-SM-87 00-006-0000 Hex Nut 408-08520 RF-SM-87 00-006-0000 Hex Nut w/ Safety Wire Holes, 408-08520 RF-SM-87 00-006-0000.02 [.533] Wire Max. 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-006-0000 Hex Nut w/ Safety Wire Holes, 408-08520 RF-SM-87 00-006-0000.04 [.355] Wire Max. Hex Nut 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-007-0000 408-08520 RF-SM-87 00-007-0000 Hex Nut 408-08520 RF-SM-87 00-007-0000 Hex Nut 408-08520 RF-SM-87 00-007-0000 Hex Nut w/ Safety Wire Holes, 408-08520 RF-SM-87 00-007-0000.05 [.38] Wire Max. Hex Nut w/ Safety Wire Holes,.05 [.38] Wire Max., 408-08520 RF-SM-87 00-007-0000 Silicone end Relief Cap 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7073

Coaxial Connectors Standard Connectors Screw-On Series (Continued) s S-50, 70 & 93.400 [0.6] Max. Panel Ø.375 [9.52].375 [9.52].292 Min. [7.42] Mounting Nut Lock Washer Ø.33 Min. [7.95] Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Cable Instruction Former et Special Features Sheet No. MICRODOT Max. I.S. No. ssembly Tool S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread 03-0033-000 2.870.40.088 22.0 3.56 2.24 408-08522 RF-SM-89 00-0003-0000 03-0034-000.750.235.087 9.05 5.97 2.2 408-08522 RF-SM-89 00-0003-0000 05-0467-000.720 8.30.235 5.97.079 2.0 Hex Collet Cable Clamp 408-08522 RF-SM-89 00-0003-0000 S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread 03-0036-000.760 9.30.255 6.48.093 2.36 408-08522 RF-SM-89 00-0004-0000 03-0048-000 2.880.40.093 22.35 3.56 2.36 408-08525 RF-SM-95 00-0004-0000 03-0090-000.760 9.30.255 6.48.09 2.77 408-08522 RF-SM-89 00-0035-0000 S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread 03-0032-000 2.880.55.34 22.35 3.94 3.40 408-08525 RF-SM-95 00-0005-0000 03-0037-000.760 9.30.320 8.3.34 3.40 408-08525 RF-SM-95 00-0005-0000 03-0088-000.000 25.40.320 8.3.54 3.9 408-08533 RF-SM-06 03-0089-000 2.750.40.54 No Mounting Flat, 9.05 3.56 3.9 Hex Nut Cable Clamp 408-08524 RF-SM-92 7074 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Screw-On Series (Continued) Receptacles Max. Panel Max. Panel E Ø Min. C Solder Lug D Turret Mounting Nut C Solder Lug D Solder Pot Mounting Nut F Min. Fig. Fig. 2 Mounting Hole for Fig. & 2 Ø.037 [.940] Typ. C D Ø.037 [.940] Typ..245 [6.22] C.00 ±.005 [2.54 ±.27] Typ. Ø.055 Min. [.40] Typ..200 ±.005 [5.08 ±.27] Typ. Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features S-50 Series (50 Ohm).90 [4.83] -32 UNF-2 Thread 03-000-000 2.55.080.87.9 3.08 2.03 4.75 Wrench Flats 6.35 4.85 No Mounting Flat 03-000-0003 2.50.0.87.9 2.95 2.80 4.75 Wrench Flats 6.35 4.85 No Mounting Flat 03-0002-000 2.55.50.87.9 3.08 3.8 4.75 Wrench Flats 6.35 4.85 No Mounting Flat 03-0003-000 2.255 6.48.87 4.75 Wrench Flats.90 4.83-32 No Nut or Solder Lug, Threads into Panel 03-0024-000 2.555.20.344.438.345 4.0 3.05 8.74 Wrench Flats.3 8.76 Housing Isolated by Nylon Insulator 03-0050-000.605.60.9.73 5.37 4.06 6.35 4.75 4.85 4.39 03-0059-000 3.340.55.330 8.64 3.93 8.38 03-006-000 4.425.55.330.480 0.80 3.93 8.38 2.20 03-0062-000 3.345.330 8.76 6.35 8.38 05-025-000 2.35.25.87.38 8.00 3.8 4.75 Wrench Flats 3.50 No Mounting Thread, Solder or Press into Panel 05-038-000.605.60.9.73 5.37 4.06 6.35 4.75 4.85 4.39 w/ Safety Wire Holes,.04 [.355] Wire Max. 05-0450-000 3.340.050.330 8.64.27 8.38 05-0459-000 4.425.55.330.480 0.80 3.93 8.38 2.20 3 Outer Legs S-70 Series (70 Ohm).26 [5.49] -32 UNEF-2 Thread 03-007-000 2.555.00.28.27 4.0 2.54 6.35 7.4 5.5 No Mounting Flat 03-008-000 2.555.60.28.27 4.0 4.06 6.35 7.4 5.5 No Mounting Flat 03-005-000.605.60.28.27.97 5.37 4.06 6.35 7.4 5.5 5.00 03-0069-000 3.340.55.330 8.64 3.94 8.38 03-0072-000 4.425.55.330.480 0.80 3.94 8.38 2.20 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7075

Coaxial Connectors Standard Connectors Screw-On Series (Continued) Receptacles (Continued) Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features S-93 Series (93 Ohm) [6.35] -32 UNEF-2 Thread 03-006-000 2.555.00.32.32.25 4.0 2.54 7.92 7.92 6.38 No Mounting Flat 03-009-000 2.555.60.32.32.25 4.0 2.54 7.92 7.92 6.38 No Mounting Flat 03-0046-000 2.555.20.345.438.345 3.05 3.05 8.76 Wrench Flats.3 8.76 Housing 0 by Nylon Insulator 03-0052-000.605.60.32.32.25.232 5.37 2.54 7.92 7.92 6.38 5.89 03-0067-000 3.340.55.330 8.64 3.94 8.38 03-0073-000 4.425.55.330.480 0.80 3.94 8.38 2.20 03-0080-000 3.345.330 8.76 6.35 8.38 7076 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Slide-On Series ll plugs shown below mate with all jacks/receptacles shown below. SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 03-0053-000 03-0095-000 03-0063-000 03-0093-000 Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 032-0055-000 032-0060-000 032-0077-000 032-0087-000 032-0084-000 ulkhead SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 03-0054-000 03-0064-000 03-0094-000 Right-ngle Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 032-0063-000 032-0062-000 032-0059-000 032-0083-000 Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 03-0049-000 03-0049-000 03-0049-000 05-0258-000 05-0258-000 05-0258-000 05-0325-000 05-0325-000 05-0325-000 7RF Connectors Plug Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 032-0042-000 032-0042-000 032-0042-000 052-006-000 052-006-000 052-006-000 052-047-000 052-047-000 052-047-000 Right-ngle Printed Circuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 03-0070-000 03-0070-000 03-0070-000 ulkhead Plug SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 032-0056-000 032-006-000 032-0058-000 Printed Circuit Receptacle SOS-50 Ohm Series SOS-70 Ohm Series SOS-93 Ohm Series 03-0060-000 03-0060-000 03-0060-000 03-0065-000 03-0065-000 03-0065-000 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7077

Coaxial Connectors Standard Connectors Slide-On Series (Continued) Straight Plugs.290 [7.37] C Max. Panel D Ø Contact Tail Solder Lug Mounting Nut Fig. Fig. 2 Plug Receptacle.500 [2.70] C Max. Panel Ø E Min. Mounting Nut Lock Washer Fig. 3 ulkhead Plug Mounting Hole for Fig. 2 & 3 Fig. Dim. Dim. Dim. Dim. Dim. Cable C D E Max. et Special Features SOS-50 Series (50 Ohm) 032-0042-000 2.705 7.9 6.35.60 4.06.28 7.4.27 5.5 Turret Pin Contact Tail 032-0055-000.870 22.0 6.35.088 2.24 032-0056-000 3.950 24.3.375 9.53.45 3.68.375 9.53.33 7.95.088 2.24 052-006-000 2.750 9.05 6.35.60 4.06.28 7.4.27 5.5 Solder Pot Contact Tail 052-047-000 2.590 4.99 6.35.095 2.4.28 7.4.27 5.5 Straight Pin Contact Tail SOS-70 Series (70 Ohm) 032-0042-000 2.705 7.9 6.35.60 4.06.28 7.4.27 5.5 Turret Pin Contact Tail 032-0060-000.880 22.35 6.35.093 2.36 032-006-000 3.960 24.38.375 9.53.45 3.68.375 9.53.33 7.95.093 2.36 032-0087-000.880 22.35 6.35.08 2.24 052-006-000 2.750.60.28.27 Solder Pot 9.05 6.35 4.06 7.4 5.5 Contact Tail 052-047-000 2.590 4.99 6.35.095 2.4.28 7.4.27 5.5 Straight Pin Contact Tail SOS-93 Series (93 Ohm) 032-0042-000 2.705 7.9 6.35.60 4.06.28 7.4.27 5.5 Turret Pin Contact Tail 032-0058-000 3.960 24.38.375 9.53.45 3.68.375 9.53.33 7.95.34 3.40 032-0077-000.880.34 22.35 6.35 3.40 032-0084-000.06 26.92 6.35.54 3.9 052-006-000 2.750 9.05 6.35.60 4.06.28 7.4.27 5.5 Solder Pot Contact Tail 052-047-000 2.590 4.99 6.35.095 2.4.28 7.4.27 5.5 Straight Pin Contact Tail Lockwasher supplied in place of solder lug. Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-08526 RF-SM-97 00-0007-0000 408-08526 RF-SM-97 00-0007-0000 408-08529 RF-SM-02 00-0007-0000 408-08526 RF-SM-97 00-0007-0000 408-08526 RF-SM-97 00-0036-0000 408-08529 RF-SM-02 00-008-0000 408-08529 RF-SM-02 00-008-0000 408-08523 RF-SM-90 7078 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Slide-On Series (Continued) s.520 [3.2] Ø [6.35].375 [9.53].375 [9.53] Ø.33 [7.95] Min. Mounting Nut Lock Washer Fig. Fig. 2 Mounting Hole Fig. SOS-50 Series (50 Ohm) 03-0053-000 03-0054-000 2 SOS-70 Series (70 Ohm) 03-0095-000 SOS-93 Series (93 Ohm) 03-0063-000 03-0064-000 2 03-0093-000 03-0094-000 2 Dim. Cable et Max..800.088 20.32 2.24.970.088 24.64 2.24.80.08 20.57 2.74.80.34 20.57 3.40.980.34 24.89 3.40.00.54 27.94 3.9.750.54 9.05 3.9 Special Features Instruction Former ssembly Sheet No. MICRODOT I.S. No. Tool 408-0853 RF-SM-04 00-0007-0000 408-0853 RF-SM-04 00-0007-0000 408-0853 RF-SM-04 00-0036-0000 408-08530 RF-SM-03 00-008-0000 408-08530 RF-SM-03 00-008-0000.305 [7.75] Over.R. Cap 408-08532 RF-SM-05 Hex Nut Cable Clamp 408-08524 RF-SM-92 Right-ngle Plugs 7RF Connectors Ø [6.35] SOS-50 Series (50 Ohm) 032-0063-000 SOS-70 Series (70 Ohm) 032-0062-000 SOS-93 Series (93 Ohm) 032-0059-000 032-0083-000 Dim. Dim. Cable Max. O.D..735.545.092 8.67 3.84 2.34.745.545. 8.92 3.84 2.82.745.605.34 8.92 5.37 3.40.745.605.55 8.92 5.37 3.94 Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-007-0000 408-08520 RF-SM-87 00-007-0000 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7079

Coaxial Connectors Standard Connectors Slide-On Series (Continued) Receptacles Max. Panel Max. Panel Ø E Min. D D Solder Lug Mounting Nut Turret Solder Lug Mounting Nut Solder Pot Fig. Fig. 2 Mounting Hole for Fig. & 2.245 [6.22].00 ±.005 [2.54 ± 0.3] Typ..200 ±.005 [5.08 ± 0.3] Typ. C D C Ø.055 Min. [.40] Typ. Ø.037 Ø.037 Typ. Typ. [.940] [.940] Fig. 3 Fig. 4 Mounting Pattern for Fig. 3 & 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series 03-0049-000.75.60.28.27 8.6 4.06 6.35 7.4 5.5 03-0060-000 3.340.55.330 8.64 3.94 8.38 03-0065-000 3.340.330 8.64 6.35 8.38 03-0070-000 4.425.55.330.540 0.79 3.94 8.38 3.72 05-0258-000 2.75.60.28.27 8.6 4.06 6.35 7.4 5.5 05-0325-000.570.40.26-32 4.48 3.56 6.35 5.49 Thd. Special Features No Nut or Lockwasher, Threads into Panel 7080 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Quick-Connect Series Plug QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series 032-0002-000 032-006-000 032-002-000 032-0030-000 032-003-000 032-0032-000 032-0079-000 032-0072-000 QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series 03-0038-000 03-0040-000 Receptacle QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series 03-0057-000 03-0057-000 03-0058-000 03-0085-000 Right-ngle Plug QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series 032-0026-000 032-0027-000 032-0020-000 052-0228-000 7RF Connectors Receptacle QC-50 Ohm Series QC-70 Ohm Series QC-93 Ohm Series 03-0004-000 03-0004-000 03-0020-000 03-0005-000 03-0005-000 03-002-000 03-0006-000 03-0006-000 05-0586-000 05-0586-000 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 708

Coaxial Connectors Standard Connectors Quick-Connect Series (Continued) Straight Plugs QC-50 Series (50 Ohm) 032-0002-000 032-0030-000 QC-70 Series (70 Ohm) 032-006-000 032-003-000 032-0079-000 QC-93 Series (93 Ohm) 032-002-000 032-0032-000 032-0072-000 Dim. Dim. Cable et Max..820.093 20.83 6.35 2.36.820.093 20.83 6.35 2.36.830.093 2.08 6.35 2.36.830.093 2.08 6.35 2.36.840.08 2.34 6.35 2.74.845.32.34 2.46 7.92 3.40.845.32.34 2.46 7.92 3.40.050.32.54 26.67 7.92 3.9 Special Features Instruction Former ssembly Sheet No. MICRODOT I.S. No. Tool Solderless ssembly 408-08527 RF-SM-00 00-0007-0000 408-08526 RF-SM-97 00-0007-0000 Solderless ssembly 408-08527 RF-SM-00 00-0007-0000 408-08529 RF-SM-02 00-0007-0000 408-08526 RF-SM-97 00-0036-0000 Solderless ssembly 408-08527 RF-SM-00 00-0008-0000 408-08529 RF-SM-02 00-0008-0000 Mates with 03-0085-000 Only 408-08523 RF-SM-90 Right-ngle Plugs C Ø QC-50 Series (50 Ohm) 032-0026-000 QC-70 Series (70 Ohm) 032-0027-000 QC-93 Series (93 Ohm) 032-0020-000 052-0228-000 Dim. Dim. Dim. Cable C et Max. Special Features.735.605.092 8.67 6.35 5.37 2.34.745.605. 8.92 6.35 5.37 2.82.745.32.635.34 8.92 7.92 6.3 3.40.745.32.720.55 Mates with 8.92 7.92 8.29 3.94 03-0085-000 Only Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-006-0000 408-08520 RF-SM-87 00-007-0000 408-08520 RF-SM-87 00-007-0000 7082 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Quick-Connect Series (Continued) s QC-50 Series (50 Ohm) 03-0038-000 QC-93 Series (93 Ohm) 03-0040-000 Dim. Dim. Cable et Max..750.093 9.05 6.35 2.36.760.320.34 9.30 8.3 3.40 Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-0853 RF-SM-04 00-0007-0000 408-08530 RF-SM-03 00-009-0000 Receptacles Max. Panel C Solder Lug D Turret Mounting Nut Max. Panel C Solder Lug D Solder Pot Mounting Nut F Min. E Ø Min. Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm) 03-0004-000 2.555 4.0.095 2.4 6.35 6.35.9 4.85 No Mounting Flat 03-0005-000 2.555 4.0.65 4.9 6.35 6.35.9 4.85 No Mounting Flat 03-0006-000 2.90-32 6.35 6.35 4.83 Thd No Nut or Solder Lug, Threads into Panel 03-0057-000.605 5.37.65 4.9 6.35 6.35.9 4.85.73 4.39 05-0586-000 2.555 4.0.65 4.9 6.35 6.35.9 4.85 No Mounting Flat, Split Solder Lug QC-93 Series (93 Ohm) 03-0020-000 2.555 4.0.095 2.4.32 7.92.32 7.92.25 6.38 No Mounting Flat 03-002-000 2.555 4.0.65 4.9.32 7.92.32 7.92.25 6.38 No Mounting Flat 03-0058-000.605 5.37.60 4.06.32 7.92.32 7.92.25 6.38.232 5.89 03-0085-000.75.65.32.32.25 No Mounting Flat, Mates with 8.6 4.9 7.92 7.92 6.38 032-0072-000 & 052-0228-000 Only 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7083

Coaxial Connectors Twinax Plugs: For cables with two inner conductors and one shield Standard Connectors Twinax Series Fig. Slide-On Series Fig. 2 Screw-On Series Fig. 032-0088-000 032-0093-000 052-0229-000 2 052-0324-000 2 Dim. Dim. Cable et Max..085.32.67 27.56 7.92 4.24.085.32.23 27.56 7.92 3.2.085.440.23 27.56.8 3.2.095.440.67 27.8.8 4.24 Special Features Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-08528 RF-SM-0 00-003-0000 408-08528 RF-SM-0 00-003-0000 408-0857 RF-SM-6 00-072-0000 408-0857 RF-SM-6 00-072-0000 Twinax Receptacles and s: Max. Panel Max. Panel C D C D Lockwasher Washer Fig. Slide-On Series Solder Pot Mounting Nut Lockwasher Solder Pot Mounting Nut Fig. 2 Slide-On Series or Screw-On Series Max. Panel D C F Min. E Ø Min. Mounting Nut Lockwasher Fig. 3 Slide-On Series or Screw-On Series Mounting Hole Fig. 03-0098-000 05-0248-000 2 05-0358-000 3 05-0389-000 3 Dim. Dim. Dim. Dim. Dim. Dim. Cable Special Instruction Former C D E F Max. Features Sheet No. MICRODOT et I.S. No. ssembly Tool.82 20.62.55 3.94.375 9.53.375 9.53.33 7.95.292 7.42.960 24.38.55 3.94.437.0.375 9.53.33 7.95.292 7.42.060.075.437.500.376.35.67 Lockwasher 26.92.9.0 2.7 9.55 8.92 4.24 not included 408-0856 RF-SM-44 00-086-0000.255 3.88.255 2 6.48.437.0.500 2.7.376 9.55.35 8.92.67 4.24 408-0856 RF-SM-44 00-086-0000.075 [.9] Max. Panel when mated with a Screw-On plug,.80 [4.57] Max. Panel when mated with a Slide-On plug. 2.255 [6.48] Max. Panel when mated with a Screw-On plug,.360 [9.4] Max. Panel when mated with a Slide-On plug. 7084 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Triax Series and Terminals Triax Plugs: For cables with one inner conductor and two isolated shields 052-030-000 052-038-000 052-0593-000 Dim. Dim. Cable et Special Features Max..37.440.24 34.80.8 3.5.37.440.83 34.80.8 4.65.37.438.24 Hex Nut w/ Safety Wire Holes, 34.80.3 5.44.027 [.686] Wire Max. Instruction Former Sheet No. MICRODOT I.S. No. ssembly Tool 408-0854 RF-SM-20 408-0855 RF-SM-2 408-0858 RF-SM-73 Triax Receptacle: Triax dapter:.60 Max. [4.06] Panel. [28.9] Ø.438 [.3] Min..60 Max. [4.06] Panel.09 [27.69] Ø.50 Min. [2.73] 0.50 [2.70] 0.56 [4.22] Nut 0.56 [4.22] 0.62 [5.75].468 [.89] Min. Lockwasher Mounting Nut Lockwasher Mounting Nut Part Number 05-068-000 Mounting Hole Part Number 053-06-000 Mates with Triax Plug, oth Ends Mounting Hole Terminals Fig. Fig. 2 Terminals are gold plated. See applicable MICRODOT drawing for solder and crimp instructions. Ø C D Ø Dim. Dim. Dim. Dim. C D Cable Max. Dielectric Cable Max. Inner Conductor Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Fig. 053-0354-0003 053-0249-000 053-0495-000 053-0656-000 053-0294-0002 033-05-0002 2 033-06-000 2 033-07-000 2 053-054-000 053-0250-000 053-0020-0003 053-002-0003 053-0267-0003 053-0265-000 2 053-0230-000 2 053-055-000 053-0022-0003 053-0388-000 2 053-025-000 2.030.080.630.375.050.05.762 2.03 6.00 9.53.27.38.030.05.630.375.07.02.762 2.67 6.00 9.53.80.533.030.25.880.60.083.022.762 3.8 22.35 5.49 2..559.030.45.880.375.08.023.762 3.68 22.35 9.53 2.74.584.030.45.880.625.08.023.762 3.68 22.35 5.88 2.74.584.040.063.255.00.042.023.02.60 6.48 2.54.07.584.040.094.300.00.068.023.02 2.39 7.62 2.54.73.584.040.40.350.200.08.023.02 3.56 8.89 5.08 2.74.584.04.080.430.75.050.09.04 2.03 0.92 4.45.27.483.04.080.505.050.09.04 2.03 2.83 6.35.27.483.04.080.630.375.050.05.04 2.03 6.00 9.53.27.38.04.05.630.375.07.023.04 2.67 6.00 9.53.80.584.04.05.875.625.07.023.04 2.67 22.23 5.88.80.584.04.28.505.02.02.04 3.25 2.83 6.35 2.59.533.04.28.630.375.02.08.04 3.25 6.00 9.53 2.59.457.04.45.430.75.08.023.04 3.68 0.82 4.45 2.74.584.04.45.630.375.08.023.04 3.68 6.00 9.53 2.74.584.042.098.500.065.02.07 2.49 2.70 6.35.65.533.042.098.630.375.065.02.07 2.49 6.00 9.53.65.533 7085 7RF Connectors

Coaxial Connectors Standard Connectors Module locks D.242 [6.5] E C.375 [9.53] The five faces of basic block can be used to mount any one of 0 different terminations. The 5 faces are coded with letters as shown above. The 0 terminations are coded with Nos. 0. Part number, to be complete, must show face location and termination Nos. desired. (Ex: illustration shows 033-0042 2 7 C6 D5 E) Ordering part number will be converted to a MICRODOT assigned number at time of ordering. We do not stock complete assemblies. Size Dim. H 50 Ohm 033-0042* 6.35 70 Ohm 033-0043* 6.35 93 Ohm 033-0044*.300 7.62 *Part number to be completed by customer. Computer Part Number will be assigned by Tyco Electronics. Interfaces/Terminations Termination Number Mating Type Description 2 3 4 5 6 S S QC QC SOS SOS Receptacle Plug with Knurl Nut Receptacle Plug Receptacle Plug.25 [3.8].320 [8.3].25 [3.8].345 [8.76].255 [6.48].290 [7.37] Ø Ø Ø 50 Series 70 Series 93 Series Thread Thread.90-32 UNF.90-32 UNF.230 4.83 4.83 5.84 6.35 6.35.26-32 UNEF.26-32 UNEF.255 5.49 5.49 6.48 6.35 6.35-32 UNEF -32 UNEF.320.32 6.35 6.35 8.3 7.92 6.35 Interfaces/Terminations (Continued) Termination Number Mating Type Description.350 [8.89] 7 8 9 0 S S ulkhead Stud.60 Max. [4.06] Panel Ø.9 Min. [4.85].420 [0.67] ulkhead Plug with Plug, Nut Receptacle Nut With Wire Holes.60 Max. [4.06] Panel Ø Min..320 [8.3].320 [8.3] 50 Series 70 Series 93 Series [6.35] Mounting Nut Solder Lug.73 Min. [4.39] Height Turret Min. Mounting Nut Solder Lug Thread Thread Min. Hole Min. Hole Thread Thread Height.90-32 UNF.90-32 UNF.9.73.90-32 UNF.90-32 UNF 4.83 4.83 6.35 4.85 4.39 4.83 6.35 4.83 6.35.90-32 UNF.26-32 UNEF.28.27.97.26-32 UNEF.28.26-32 UNEF.28 4.83 5.49 7.4 5.5 5.00 5.49 7.4 5.49 7.4.90-32 UNF -32 UNEF.32.25.232-32 UNEF.32-32 UNEF.32 4.83 6.35 7.92 6.38 5.89 6.35 7.92 6.35 7.92 Ø.030 [.762] 3 Plcs. 7086 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Standard Connectors Caps, Hoods Caps, Screw-On Series For Receptacles and s Ø 0.20 [5.08] Diamond Knurl 0.20 [5.08] 0.3 [3.30] Fig. With Grounding Pin 0.2 [3.05] Ø.094 [2.39] Fig. Dim. S-50 Series 033-0046-000.235 5.97 033-0056-000 2.235 5.97 S-70 Series 033-0047-000.255 6.48 033-0057-000 2.255 6.48 S-93 Series 033-0048-000.35 8.00 033-0058-000 2.35 8.00 Ø Diamond Knurl Fig. 2 Without Grounding Pin Ø.094 [2.39] Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Note: ll caps can be supplied with.094 [2.39] bead chain and end ring. When ordering, specify chain length and end ring hole size (.30 [3.30],.40 [3.56],.67 [4.24], or.93 [4.90] ) Receptacle Hoods Ø C 7RF Connectors 033-0067-000 033-0068-000 033-0069-000 033-0084-000 053-047-000 Material rass per QQ--626 Finish Silver plate per QQ-S-365,.0002 [.005] min. Dim. Dim. Dim. C Thread.490.098.90-32 UNF 2.45 6.35 2.49 4.83.490.4.26-32 UNEF 2.45 6.35 2.90 5.49.490.32.56-32 UNEF 2.45 7.92 3.96 6.35.490.56.26-32 UNEF 2.45 6.35 3.96 5.49.840.437.56.375-32 UNEF 2.34.0 3.96 9.53 For Receptacle Series S-50, QC-50, QC-70 S-70, SOS-50, SOS-70, SOS-93 S-93, QC-93 S-70, SOS-50, SOS-70, SOS-93 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7087

Coaxial Connectors Standard Connectors dapters Feed-Thru dapters for Screw-On Series.60 Max. [4.06] Panel Ø.33 Min. [7.95] X Y X Y Nut.294 [7.47] Min. Lockwasher Mounting Nut Fig. Fig. 2 Mounting Hole Fig. 033-000-000 033-0053-000 2 033-0023-000 033-0054-000 2 033-0036-000 033-0055-000 2 Dim. Dim..300 7.62 6.35.600.375 5.24 9.53.400 0.6 6.35.600.375 5.24 9.53.40.32 0.4 7.92.600.375 5.24 9.53 End X Is End Y Is S-50 Receptacle S-50 Receptacle S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle NC and TNC/MICRODOT dapters for Screw-On, Slide-On, and Quick- Connect Series For mating NC/TNC connectors to MICRODOT standard connectors..469 Min. [.9].50 [2.73] Min. Mounting Hole End Is: Configuration End Is: 50 Series 70 Series 93 Series NC Plug Screw-On (S) Type Plug 033-003-000 033-007-000 033-0-000 Screw-On NC Plug Type 033-00-000 033-005-000 033-009-000 Receptacle NC Receptacle Screw-On (S) Type Plug 033-004-000 053-008-000 033-02-000 NC Receptacle Screw-On (S) Type 033-002-000 033-006-000 033-00-000 Receptacle NC ulkhead Receptacle Screw-On (S) Type Plug 033-027-000 033-029-000 7088 Mounting information: Housing.688 [7.48], Mtg. Nut.625 [5.88], Max. Panel.090 [2.29]. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors NC and TNC/MICRODOT dapters for Screw-On, Slide-On, and Quick- Connect Series (Continued) Standard Connectors dapters (Continued).469 Min. [.9].50 [2.73] Min. Mounting Hole End Is: Configuration End Is: 50 Series 70 Series 93 Series NC ulkhead Receptacle Screw-On (S) Type 033-0090-000 033-025-000 033-026-000 Receptacle Screw-On (S) TNC Plug Type 033-04-000 033-043-000 033-045-000 Receptacle TNC Receptacle Screw-On (S) Type 033-053-000 Receptacle NC Plug Slide-On (SOS) Type Plug 053-0339-000 053-0339-000 053-0339-000 NC Plug NC Receptacle Slide-On (SOS) Type 033-008-000 033-008-000 033-008-000 Receptacle Slide-On (SOS) Type Plug 033-0092-000 033-0092-000 033-0092-000 7RF Connectors NC Receptacle Slide-On (SOS) Type 033-0082-000 033-0082-000 033-0082-000 Receptacle NC Slide-On (SOS) ulkhead Type 033-024-000 033-024-000 033-024-000 Receptacle Receptacle NC Plug Quick-Connect (QC) Type 033-0093-000 033-0093-000 033-0097-000 Receptacle NC Receptacle Quick-Connect (QC) Type 033-0094-000 033-0094-000 Receptacle Mounting information: Housing.688 [7.48], Mtg. Nut.625 [5.88], Max. Panel.090 [2.29]. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7089

Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Performance Data Summary For Gold Plated Crimp Style Coaxial Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 50 Ohm connectors, 5 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 25 lb. min. Recommended Coupling Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] Recommended Receptacle Mounting Torque (Threaded Interface) 8 inch/pounds max. [.904 Nm] Contact Protection (Unmated) Pin contact protected by coupling nut. Socket protected by insulator and housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-ngle Plugs Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Environmental Temperature Range (Continuous Service) -80 F to +392 F. [-62 C to +200 C]. Vibration,2 MIL-STD-202, Method 204, Test condition (5 G peak). No physical damage or electrical discontinuities in excess of microsecond. Shock,2 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition C. Moisture Resistance MIL-STD- 202, Method 06. Salt Spray MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage 000 volts RMS at sea level. Contact Resistance 4 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 5 x 0 3 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm series,.2 max. to 2 GHz. Materials Housing, Nut, Inner Sleeve rass per STM--6, 35% Zinc. Insulator TEFLON per STM-D-70. Pin & Socket Contacts eryllium Copper per STM--96. Middle Sleeve Copper lloy. Facial Seal 4, Sealing Sleeve & Gasket Silicone Rubber per ZZ-R-765. Lockwasher #425 ronze lloy. Plating Contacts, Housing, Nut, Inner Sleeve, Middle Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade C, Class. NOTES: Screw-On Series threaded interface. 2 Tyco Electronics recommends the use of wired connectors in vibration and shock environments. See individual specifications for connectors with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies (See page 705) and specify VSWR testing and mating connector part numbers. 7090 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series Straight Plugs Ø Fig. Partial Nut Fig. 2 Knurl Nut Fig. 3 Full Nut Fig. 4 Nut w/ 3 Safety Wire Holes Fig. Dim. Dim. Cable Instruction Former Max. Special Features Sheet No. MICRODOT I.S. No. 50 Ohm Series.90 [4.83] -32 UNF-2 Thread 32-02-000.800.088 20.32 6.35 2.24 408-08508 RF-SM-8 32-02-0002 2.800 20.32 6.35.088 2.24 408-08508 RF-SM-8 32-02-0003 3.800 20.32 6.35.088 2.24 408-08508 RF-SM-8 32-02-0004 4.800.088 20.32 6.35 2.24 408-08508 RF-SM-8 32-03-000.800 20.32 6.35.088 2.24 With environmental seal 408-08508 RF-SM-8 32-03-0002 2.800 20.32 6.35.088 2.24 With environmental seal 408-08508 RF-SM-8 32-03-0003 3.800 20.32 6.35.088 2.24 With environmental seal 408-08508 RF-SM-8 32-03-0004 4.800.088 20.32 6.35 2.24 With environmental seal 408-08508 RF-SM-8 32-04-000.800 20.32 6.35.0 2.79 408-08508 RF-SM-8 32-04-0002 2.800 20.32 6.35.0 2.79 408-08508 RF-SM-8 32-04-0003 3.800.0 20.32 6.35 2.79 408-08508 RF-SM-8 32-04-0004 4.800 20.32 6.35.0 2.79 408-08508 RF-SM-8 32-05-000.800 20.32 6.35.0 2.79 With environmental seal 408-08508 RF-SM-8 32-05-0002 2.800 20.32 6.35.0 2.79 With environmental seal 408-08508 RF-SM-8 32-05-0003 3.800 20.32 6.35.0 2.79 With environmental seal 408-08508 RF-SM-8 32-05-0004 4.800 20.32 6.35.0 2.79 With environmental seal 408-08508 RF-SM-8 32-0509-0002 2.800 20.32 6.35.6 2.95 Dual shield cable version of RG 88 & 36 408-08508 RF-SM-8 70 Ohm Series.26 [5.49] -32 UNEF-2 Thread 32-0200-000.800 20.32.28 7.4.0 2.79 408-08508 RF-SM-8 32-0200-0002 2.800 20.32.290 7.37.0 2.79 408-08508 RF-SM-8 32-0200-0003 3.800 20.32.28 7.4.0 2.79 408-08508 RF-SM-8 32-0200-0004 4.800 20.32.28 7.4.0 2.79 408-08508 RF-SM-8 32-020-000.800 20.32.28 7.4.0 2.79 With environmental seal 408-08508 RF-SM-8 32-020-0002 2.800 20.32.290 7.37.0 2.79 With environmental seal 408-08508 RF-SM-8 32-020-0003 3.800 20.32.28 7.4.0 2.79 With environmental seal 408-08508 RF-SM-8 32-020-0004 4.800 20.32.28 7.4.0 2.79 With environmental seal 408-08508 RF-SM-8 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 709

Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) Straight Plugs (Continued) Fig. 93 Ohm Series [6.35] -32 UNEF-2 Thread 32-0300-000.795 20.9.32 7.92.55 3.94 32-0300-0002 2.795 20.9.320 8.3.55 3.94 32-0300-0003 3.795 20.9.32 7.92.55 3.94 32-0300-0004 4.795 20.9.32 7.92.55 3.94 32-030-000.795 20.9.32 7.92.55 3.94 32-030-0002 2.795 20.9.320 8.3.55 3.94 32-030-0003 3.795 20.9.32 7.92.55 3.94 32-030-0004 4.795.32.55 20.9 7.92 3.94 Dim. Dim. Cable Instruction Max. Special Features Sheet No. Former MICRODOT I.S. No. 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 With environmental seal 408-08508 RF-SM-8 With environmental seal 408-08508 RF-SM-8 With environmental seal 408-08508 RF-SM-8 With environmental seal 408-08508 RF-SM-8 Right-ngle Plugs Ø C Knurl Nut Dim. Dim. Dim. Cable C et Max. 50 Ohm Series.90 [4.83] -32 UNF-2 Thread 32-06-0002.660 6.76 6.35.620 5.75.088 2.24 32-07-0002.660.620.088 6.76 6.35 5.75 2.24 32-08-0002.695 7.65 6.35.650 6.5.0 2.79 32-09-0002.695 7.65 6.35.650 6.5.0 2.79 70 Ohm Series.26 [5.49] -32 UNEF-2 Thread 32-0202-0002.695 7.65.290 7.37.650 6.5.0 2.79 32-0203-0002.695 7.65.290 7.37.650 6.5.0 2.79 93 Ohm Series [6.35] -32 UNEF-2 Thread 32-0302-0002.70 8.03.320 8.3.680 7.27.55 3.94 32-0303-0002.70.320.680.55 8.03 8.3 7.27 3.94 Special Features Instruction Former Sheet No. MICRODOT I.S. No. 408-08509 RF-SM- With environmental seal 408-08509 RF-SM- 408-08509 RF-SM- With environmental seal 408-08509 RF-SM- 408-08509 RF-SM- With environmental seal 408-08509 RF-SM- 408-08509 RF-SM- With environmental seal 408-08509 RF-SM- 7092 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) s C Max. Panel Ø.33 [7.95] Min..375.375 [9.53] Nut [9.53].292 Min. [7.42] Mounting Nut Lockwasher Fig. Fig. 2 Mounting Hole Fig. Dim. Dim. Dim. Cable C et Max. Special Features 50 Ohm Series.90 [4.83] -32 UNF-2 Thread 3-034-000.770 9.56 6.35.088 2.24 3-035-000 2.770.360.05.088 9.56 9.4 2.67 2.24 3-036-000.770 9.56 6.35.0 2.79 3-037-000 2.770 9.56.360 9.4.05 2.67.0 2.79 3-050-000.770.6 Dual Shield Cable 9.56 6.35 2.95 Version of RG 88 & 36 3-05-000 2.770 9.56.360 9.4.05 2.67.6 2.95 Dual Shield Cable Version of RG 88 & 36 70 Ohm Series.26 [5.49] -32 UNEF-2 Thread 3-0200-000.770.28.0 9.56 7.4 2.79 3-020-000 2.770 9.56.360 9.4.00 2.54.0 2.79 93 Ohm Series [6.35] -32 UNEF-2 Thread 3-0300-000.760 9.30.32 7.92.55 3.94 3-030-000 2.760 9.30.350 8.89.095 2.4.55 3.94 Instruction Former Sheet No. MICRODOT I.S. No. 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 408-08508 RF-SM-8 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7093

Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Screw-On Series (Continued) Receptacles Max. Panel Max. Panel C Solder Lug Ø.037 [0.94] Typ. C D Turret Mounting Nut.245 [6.22] Ø.037 [0.94] Typ. Fig. 3 Fig. 4 Fig. Dim. Dim. Dim. C Dim. D Dim. E Dim. F Special Features 50 Ohm Series.90 [4.83] -32 UNF-2 Thread 3-038-0002.605.60.9.73 5.37 4.06 6.35 6.35 4.85 4.39 3-039-0002 2.55.50.87.9 3.08 3.8 4.75 Wrench Flats 6.35 4.85 No Mounting Flat 3-040-000 2.255.87 6.48 4.75 Wrench Flats.90-32 Thd. 4.83 No Nut or Solder Lug, Threads into Panel 3-04-0002 3.340.55.330 8.64 3.94 8.38 3-042-0002 4.425.55.330.480 0.80 3.94 8.38 2.9 70 Ohm Series.26 [5.49] -32 UNEF-2 Thread 3-0202-0002.605.60.28.27.97 5.37 4.06 6.35 7.4 5.5 5.00 3-0705-000 3.340.55.330 8.64 3.94 8.38 93 Ohm Series [6.35] -32 UNEF-2 Thread 3-0303-0002 3.340.55.330 8.64 3.94 8.38 3-0304-000 4.425.55.330.480 0.80 3.94 8.38 2.9 3-0904-000.605.60.32.32.25.232 5.37 4.06 7.92 7.92 6.38 5.89 D Solder Lug Fig. Fig. 2 C Solder Pot Mounting Nut D C F Min..00 ±.005 [2.54 ± 0.3] Typ. Ø.055 Min. [.40] Typ. Ø E Min. Mounting Hole for Fig. & 2 Mounting Pattern for Fig. 3 & 4.200 ±.005 [5.08 ± 0.3] Typ. Gold Plated Crimp Style Coaxial Connectors ssembly Tools Table. Contact Crimp Tools MICRODOT Manufacturers 00-0065-0000 stro Tool -80-3 Table 2. Housing Crimp Tools MICRODOT Thomas & etts Max. Cable Diameter 00-008-0000 WT-400.088 [2.24] 00-0082-0000 WT-402.0 [2.79] 00-0083-0000 WT-406.55 [3.94] Sealing Sleeve Inner Sleeve Pin Contact Housing Insulator Housing Sub-assembly Plug 7094 Middle Sleeve Cable Insulator Socket Contact Housing Insulator Housing Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 Gasket

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Performance Data Summary For LEPR/CON Connectors Mechanical Captive Contacts Terminated connector contacts captivated from movement in both directions. Cable Retention 0 lb. min. when properly assembled to RG96/U and RG78/U cable. Recommended Coupling Torque (Threaded Interface) 24 inch/ounces max. Recommended Receptacle Mounting Torque (ll Series) 24 inch/ounces max. Typical Cable cceptance Dimensions Inner conductor:.02 [0.3] nom. Dielectric:.039 [0.99] max. Shield:.059 [.50] max. et:.08 [2.06] max. Contact Protection (Unmated) Twist pin contact protected from damage by insulator. Tube socket protected by connector housing. ssembly Methods Straight Plugs & s Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-ngle Plugs Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped under housing. Environmental Temperature Range (Continuous Service) -85 F to +392 F [-65 C to +200 C]. Vibration,2 MIL-STD-202, Method 204, Test Condition (5 G peaks). No physical damage or electrical discontinuities in excess of microsecond. Shock,2 MIL-STD-202, Method 23, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock MIL-STD-202, Method 07, Test Condition C. Moisture Resistance MIL-STD- 202, Method 06. Salt Spray MIL-STD-202, Method 0, Test Condition (48 hours). Electrical Impedance Designed to be compatible with 50 Ohm coaxial cable RG78/U. Dielectric Withstanding Voltage 450 volts RMS at sea level, 250 volts RMS at 50,000 ft [5,240 m], 50 volts RMS at 70,000 ft. [2,336 m] Contact Resistance 8 milliohms max., D.C. Contact Capacity 3 amps, D.C. Insulation Resistance 0 4 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio 3 (VSWR) Typical 50 Ohm Series,.2 Maximum to 2 GHz. Materials Housing, Nut, Ferrule rass per STM--6. Insulator TEFLON per STM-D-70. Pin & Socket Contact Copper lloy. Crimp Sleeve Copper lloy. Lockwasher #425 ronze lloy. Plating Contacts, Housing, Nut, Ferrule, Crimp Sleeve, Lockwasher Gold per MIL-G-45204, Type II, Grade C, Class. Notes: Screw-On Series, threaded interface. 2 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environments. See individual specifications with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On connectors (See page 705) and specify VSWR testing and mating connector part numbers. 7RF Connectors Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7095

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series Featuring Twist Pin, Pin and Socket Contacts, Standard Interface MICRODOT twist pin, pin and socket contacts are used in LEPR/CON connectors. Twist pin contact pins are produced from beryllium copper material with a gold-plated finish and constructed with helicallywound stress free cable of spring copper around a highly conductive soft copper core, terminated with a hemispherical weld. Twist pin contacts contain seven selfwiping spring surfaces, designed for consistent continuity and very low noise level. Twist pin contacts are self-aligning because of the contactengaging-end configuration. The sockets are a closed entry tubular-type contact, made of gold-plated copper alloy. The connectors are designed to be used with coaxial cables RG96/U and RG78/U. The connectors are designed with the contacts completely protected for reliability. The use of twist pin contacts makes the connectors very rugged for their size..25-44unf-2 [3.8] (Modified).05 [0.38] 3 Places (42-0000-0003 Only).580 [4.73] Solder Center Conductor to Contact.05 [0.38] 3 Places (42-0002-0003 Only).380 [9.65].395 [0.03].25-44UNF-2 [3.8] (Modified) Straight Plugs Nut Style 42-0000-000.56 [3.96] 42-0000-0002.60 [4.06] Knurl 42-0000-0003.56 [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-2.25-44UNF-2 [3.8] (Modified).580 [4.73] Right-ngle Plug Nut Style 42-0002-000.56 [3.96] 42-0002-0002.60 [4.06] Knurl 42-0002-0003.56 [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-3.580 [4.73].270 [6.86].093 Max. [2.36] Panel.56 [3.96] Stk..270 [6.86] Part Number 4-0000-000 Instruction Sheet Number 408-0850 Former MICRODOT I.S. Number RF-SM-2.56 [3.96] Stk..25-44UNF-2 [3.8] (Modified) ulkhead Part Number 4-000-000 Instruction Sheet Number 408-0850 Former MICRODOT I.S. Number RF-SM-2.56 [3.96] 2 Plcs..25-44UNF-2 [3.8] (Modified).40 [3.56].425 [0.80].093 Max. [2.36] Panel.022 Solder Pot [0.56] I.D. Turret.56 [3.96] 2 Plcs..425 [0.80].260 [6.60].25-44UNF-2 [3.8] (Modified).093 Max. [2.36] Panel.022 Turret I.D. [0.56].022 Solder Pot I.D. [0.56] Front Mount Receptacle Contact Tail 4-0002-000 Turret 4-0002-0002 Solder Pot Rear Mount Receptacle Contact Tail 4-0003-000 Turret 4-0003-0002 Solder Pot 7096 Mounting hole pattern and assembly tools shown on page 70. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts, Standard Interface (Continued).25-44UNF-2 [3.8] (Modified).225 [5.72].72 [4.37] Straight Printed Circuit Receptacle 4-0004-000.026 Typ. [.660].370 [9.40] Cavity Potted With Epoxy.25-44UNF-2 [3.8] (Modified) Thd..370 [9.40] Cavity Potted With Epoxy.385 [9.78].20 [3.05].72 [4.37].25-44UNF-2 [3.8] (Modified) Thd..385 [9.78].20 [3.05].72 [4.37].026 [6.60] 5 Plcs. Shipping Fixture.026 [6.60] Typ. Right-ngle Printed Circuit Receptacle (Small Mounting Pattern) Part Number 4-009-000 Right-ngle Printed Circuit Receptacle (Standard Mounting Pattern) Part Number 4-000-000.205 [5.2].545 [3.84].080 Max. [2.03] Panel.25 -UNF44-2 Thd. [3.8] (Modified) oth Ends.56 [3.96] [6.35] 2 Plcs..26-32 UNF [5.49] Thd. Feed-Thru ulkhead dapter (oth Ends are Receptacle Interface) Part Number 43-0005-000.202 [5.3] Min..27 [5.5] 7RF Connectors.25-44 UNF-2 [3.8] (Modified).490 [2.45].275 [6.99].093 Max. [2.36] Panel.56 [3.96] Sq..285 [7.24] Cavity Filled With Epoxy.5 [2.92] Straight Plug Right-ngle Receptacle Part Number 4-003-000 Mounting hole pattern and assembly tools shown on page 70. Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7097

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface The MICRODOT LEPR/CON coaxial connector series is now offered with a unique locking interface feature. This new coupling design permits the user to lock the coaxial plug, when mated to its receptacle, preventing any axial rotation. This adaptation is especially popular on connector installations requiring straight or 90 cable terminations firmly held in a fixed position. The locking interface is especially suited for telecommunications and instrumentation applications. Solder Center Conductor to Contact.395 [0.03].05 3 Plcs. Ref. [0.38] (42-005-0003 Only).05 3 Plcs. [0.38] (42-000-0003 Only).380 [9.65].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified).580 [4.73] Straight Plug Right-ngle Plug Nut Style 42-000-000.56 [3.96] 42-000-0002.60 [4.06] Knurl 42-000-0003.56 [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-2, 42-000-000 Nut Style 42-0005-000.56 [3.96] 42-0005-0002.60 [4.06] Knurl 42-0005-0003.56 [3.96] w/ Safety Wire Holes ssembly instructions: RF-SM-3, 42-0005-000 ssembly tools; page 70. 7098 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface (Continued).590 [4.99].590 [4.99].285 [7.24].093 Max. [2.36] Panel.56 [3.96].25-44UNF-2 [3.8] (Modified).56 2 Plcs. [3.96].25-44UNF-2 [3.8] (Modified) Straight Part Number 4-007-000 Instruction Sheet Number 408-0850 Former MICRODOT I.S. Number RF-SM-2 ulkhead Part Number 4-004-000 Instruction Sheet Number 408-0850 Former MICRODOT I.S. Number RF-SM-2.25-44UNF-2 [3.8] (Modified).022 Solder Pot [.559] I.D..56 [3.96] 2 Plcs..022 Solder Pot [.559] I.D. Turret.56 2 Plcs. [3.96] Turret.55 [3.94].093 Max. [2.36] Panel.440 [.8].25-44UNF-2 Thd. [3.8] (Modified).275 [6.99].440 [.8].093 Max. [2.36] Panel Front Mount Receptacle Rear Mount Receptacle w/ Locking Interface Contact Tail 4-002-000 Solder Pot 4-002-0002 Turret Contact Tail 4-00-000 Turret 4-00-0002 Solder Pot.56 [3.96].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified).240 [6.0].72 [4.37].026 [0.66] Typ. 7RF Connectors.275 [6.99].093 Max. [2.36] Panel Straight Printed Circuit Receptacle Part Number 4-005-000.490 [2.45].385 [9.78] Cavity Potted With Epoxy.5 [2.92].20 [3.05] Cavity Filled With Epoxy.56 [3.96] Sq..300 [7.62].25-44UNF-2 [3.8] (Modified).385 [9.78].72 [6.77] Right-ngle Receptacle Part Number 4-0020-000.026 [.660] 5 Plcs. Shipping Fixture Mounting hole pattern and assembly tools shown on page 70. Right-ngle Printed Circuit Receptacle Part Number 4-0023-000 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 7099

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Slide-On Series Featuring Twist Pin, Pin and Socket Contacts LEPR/CON Slide-On Connectors offer a convenient mating style along with Ultra-miniature size. Inner contacts are twist pin tubular sockets in plugs and twist pin contacts for jacks and receptacles. Positive housing contact is provided by a three finger contact in the plug housing..25 [3.8].60 [5.49].25 [3.8].440 [.8] Straight Plug Part Number 42-000-000 Instruction Sheet Number 408-0852 Former MICRODOT I.S. Number RF-SM-5.380 [9.65] Right-ngle Plug Part Number 42-002-000 Instruction Sheet Number 408-0853 Former MICRODOT I.S. Number RF-SM-6 [6.35] 2 Plcs..445 [.30].265 [6.73].90-32UNF-2 Thd. [4.83].40 Max. [3.56] Panel Ø.9 [4.85] Min..335 [8.5].640 [6.26].093 Max. [2.36] Panel.490 [2.45] Mounting Hole.56 [3.96] 2 Plcs..25-44UNF-2 [3.8] (Modified) Right-ngle ulkhead Mount Plug Part Number 42-02-000 Instruction Sheet Number 408-0859 Former MICRODOT I.S. Number RF-SM-76 Straight ulkhead Part Number 4-00-000 Instruction Sheet Number 408-0852 Former MICRODOT I.S. Number RF-SM-5.570 [3.99].220 [5.59].495 [2.57].022 Solder Pot [0.56] I.D..093 Max. [2.36] Panel Turret.25 [3.8] Straight Part Number 4-000-000 Instruction Sheet Number 408-0852 Former MICRODOT I.S. Number RF-SM-5 Mounting hole and assembly tools shown on page 70..25-44UNF-2 [3.8] (Modified).56 [3.96] 2 Plcs. Front Mount Receptacle Contact Tail 4-002-000 Turret 4-002-0002 Solder Pot 700 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Slide-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts (Continued).022 Solder Pot [.559] I.D..56 [3.96].56 [3.96] 2 Plcs..25-44UNF-2 [3.8] (Modified).335 [8.5].495 [2.57] Rear Mount Receptacle.093 Max. [2.36] Panel Turret.5 [2.92].275.490 [6.99] [2.45].56 Sq. [3.96].385 [9.78] Cavity Filled With Epoxy Contact Tail 4-003-000 Turret 4-003-0002 Solder Pot Mounting Hole shown below..425 [0.80] Right-ngle Receptacle Mounting Hole Shown elow Part Number 4-02-000.026 Typ [0.66].097 [2.46].385 [9.78].20 [3.05].72 [4.37].260 [6.60].4 [2.90] Min..72 [4.37] Straight Printed Circuit Receptacle Mounting Hole Pattern Shown elow Part Number 4-004-000.26 [3.20] Min. ulkhead Receptacle Mounting Hole LEPR/CON Connector ssembly Tools.095.05 Typ. [2.4 2.67].046 Min. [.7] 5 Holes.026 Typ. [0.66] Right-ngle Printed Circuit Receptacle Mounting Hole Pattern Shown elow Part Number 4-005-000.045.055 Typ. [.4.40].095.05 Typ. [2.4 2.67].046 Min. [.7] 5 Holes.95.205 Typ. [4.95 5.2] Small Pattern Connectors 4-009-000 Standard Pattern and 4-0023-000 Only Printed Circuit Receptacle Mounting Hole Pattern 7RF Connectors Contact Crimp Tool Housing Crimp Tool Connector Contact Crimp No. stro Tool MICRODOT Thomas & etts Straight Connector Only 00-050-0000-826- 00-032-0000 WT-49 4-00-000 00-06-0000 827 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 70

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors (Continued) NC / LEPR/CON Connector dapters End.25-44UNF-2 [3.8] (Modified) End End.25-44UNF-2 [3.8] (Modified) End.900 [22.86].850 [2.59] End is MICRODOT Screw-On Plug End is NC Plug End is NC Receptacle End is MICRODOT Screw-On Receptacle Part Number 43-000-000 Part Number 43-0003-000.950 [24.3].25-44UNF-2 [3.8] (Modified).25-44UNF-2 [3.8] (Modified) End End End End.865 [2.97] End is NC Plug End is MICRODOT Screw-On Plug with Locking Interface End is NC Receptacle End is MICRODOT Screw-On Receptacle with Locking Interface Part Number 43-0029-000 Part Number 43-0032-000.835 [2.2] End End.25-44UNF-2 [3.8] (Modified) End End.785 [9.94] End is Screw-On Receptacle End is NC Plug End is NC Plug End is MICRODOT Slide-On Plug Part Number 43-0002-000 Part Number 43-000-000 702 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors (Continued) NC / LEPR/CON Connector dapters (Continued).800 [20.32].25-44UNF-2 [3.8] (Modified).900 [22.86] End End End End End is NC Plug End is MICRODOT Receptacle with Locking Interface End is NC Plug End is MICRODOT Slide-On Receptacle Part Number 43-003-000 Part Number 43-002-000.25-44UNF-2 [3.8] (Modified) End End End End.965 [24.5].900 [22.86] End is NC Receptacle End is MICRODOT Screw-On Plug End is NC Receptacle End is MICRODOT Slide-On Plug Part Number 43-0004-000 Part Number 43-00-000 End.25-44UNF-2 [3.8] (Modified) End End End 7RF Connectors.05 [25.78].965 [24.5] End is NC Receptacle End is MICRODOT Screw-On Plug with Locking Interface End is NC Receptacle Part Number 43-0030-000 Part Number 43-003-000 End is MICRODOT Slide-On Receptacle Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967 703

Coaxial Connectors LEPR/CON Ultra-Miniature Connectors Snap-Lock Series Product Facts Simple coupling design eliminates the need for tools and saves assembly time Positive locking mechanism provides its own fail-safe features Inspection of the mated connector is fast, simple and effective Push-Pull design allows higher panel density Quick-connect and disconnect features Performance Data Summary For Snap-Lock Connectors Electrical Impedance Designed to be compatible with 50 Ohm coaxial cables (Dual Shield RG 96). Dielectric Withstanding Voltage 450 volts RMS at sea level (Operating). Contact Resistance 8 milliohms max. at 3 amps. verage resistance: 4 milliohms Insulation Resistance 0 4 megohms min. Voltage Standing Wave Ratio (VSWR) 3.4 max.,.3 min. to 2 GHz. Environmental Temperature Range -85 F to +257 F [-65 C to +25 C]. Vibration MIL-STD-202, Method 204, Test condition D. No change in electrical discontinuity in excess of microsecond. Shock MIL-STD-202, Method 23, Test Condition C. No electrical discontinuity or evidence of physical damage. Mechanical Cable cceptance Dimensions Center conductor:.02 [0.3] nom. Dielectric:.040 [.02] max. Shield:.080 [2.03] max. et:.090 [2.29] max.. ll-crimp ssembly Center contacts and shield are crimped individually. Durability 500 mating cycles. Materials ody and ody Components rass per QQ--626 Comp 360. Contact Material Copper lloy. Crimp Sleeves Leaded Copper. Insulators TEFLON per STM-D-70. Lockwashers #425 ronze lloy. Plating Gold per MIL-G-45204, Type II, Grade C, Class. [6.35].750 [9.05].29 [5.56].46.49 [3.7 3.78].79 [8.26] Straight Plug Part Number 44-000-000.093 Max. [2.36] Panel.406 [0.3] 8-32 UNC-2 (Modified) ulkhead, Rear Mount Part Number 45-000-000.32 [7.92].65.68 [4.9 4.27] D Hole Dimensions For Panel Mounting.093 Max. [2.36] Panel.625 [5.88].406 [0.3] 8-32 UNC-2 (Modified) Receptacle, Rear Mount Part Number 45-0003-000.29 [5.56].32 [7.92].29 [5.56].32 [7.92].625 [5.88].093 Max..285 [2.36] Panel [7.24] 8-32 UNC-2 (Modified) Receptacle, Front Mount Part Number 45-0002-000 Connector/Cable ssembly Crimp Tools Center Contact and Shield Tool SKT & Pin Crimp Housing Crimp 00-004-0000 00-008-0000 704 Catalog 308940 Dimensions are in inches and Dimensions are shown for US: -800-522-6752 South merica: 55--36-54 www.tycoelectronics.com are metric equivalents. to change. C. merica: 52-55-5-729-0425 UK: 44-4-80-8967