G-SPOT MOVING HEAD PROFILE

Dimensions 805 (31.7) 646 (25.4) 327 (12.9) 340 (13.4) 370 (14.6) 494 (19.5) 135 135 821 (32.3) 144 (5.7) Min. c/c 764 (30.0) 470 (18.5) 16 (0.63) 270 270 664 (26.2) 492 (19.4) 37 (1.46) Measurements in millimetres and inches (in brackets). Drawing not to scale. 2

G-SPOT USER MANUAL 2014 SGM. Information subject to change without notice. SGM and all affilated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this manual. The SGM logo, the SGM name and all other trademarks in this document pertaining to services or products by SGM or its affiliates and subsidiaries are trademarks owned or licensed by SGM or its affiliates or subsidiaries. The original edition of this document is in English. All other language editions are translations of the original edition. This edition applies to firmware version 1.00 or later. REV. 3 3

Contents Dimensions... 2 Safety information... 7 Overview...9 Unpacking... 10 Installation / Rigging...11 Connecting AC power...13 Control panel operations...14 Using the control panel...14 DMX start address...14 Control panel menus...15 Gobo replacement... 21 Identification of gobo wheel...21 Replacing rotating gobos...22 How to replace a gobo in a gobo holder....23 Maintenance... 24 5

DMX protocols...25 Effects...42 Two independent rotating gobo wheels... 42 Effect wheels... 42 High-precision pan and tilt... 42 Ultra high-speed strobe effect... 42 Focus, zoom and iris... 43 Prism... 43 Frost... 43 Specifications...44 Physical... 44 Construction... 44 Installation... 44 Operating conditions... 44 Programming and control... 45 Connections... 45 Electrical... 45 Optics... 46 Photometric... 46 Gobos... 46 Features... 47 Approvals and certifications... 47 6

Safety information WARNING! Read the safety precautions in this section before unpacking, installing, powering or operating this product. The G-SPOT is intended for professional use only. It is not suitable for household use. Impropre a l usage domestique. Review the following safety precautions carefully before installing or operating the device. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. WARNING! Risk of electric shock. Always power off/unplug the device before removing covers or dismantling product. Ensure that the power is cut off when wiring the device to the AC mains supply. Ensure that the device is electrically connected to earth (ground). Do not apply power if the device is in any way damaged. Do not immerse the device in water or liquid. 7

WARNING! Take measures to prevent burns and fire. Install in a location that prevents accidental contact with the device. Install fixture at least 0.3 m (11 in.) away from any flammable materials. Do not cover fans, and keep them clean. Keep all flammable materials away from the device. Allow the device to cool after operation. CAUTION: Exterior surface temperature after 5 min. operation = 55 C (131 F). Steady state = 65 C (149 F) WARNING! Take measures to prevent personal injury. Do not look directly at the light source from close range. Take precautions to prevent injury when working at height. Ensure that the device is always securely fastened with suitable hardware. For elevated installations, secure the fixture with suitable safety cables, and always comply with relevant load dimensioning, safety standards and requirements. 8

Overview The SGM G-Spot model is a maintenance free, multi-environmental product with an IP-rating of 65. The fixture has a powerful LED light source, and a virtually unlimited color palette, two independent rotating gobo wheels and can easily be controlled by wired and wireless DMX. The fixture also offers RFID and NFC, low power consumption and an expected liftime of the multiple LED s of 50,000 hours. C E D B C A F A: Pan lock B: Tilt lock C: Yoke handle D: Base handle E: Head fan grill (one of two shown) F: Display panel G: Safety wire attachment point H: Fuse I: DMX in J: DMX out K: Power in L: Power cord I H L K G G D J 9

Unpacking Unpack the device and inspect it to ensure that it has not been damaged in transport. The G-Spot is supplied with: User manual 1 Neutrik TRUE1 power input connector, 2 mtr (78 in.) 2 omega clamps with 1/4-turn fasteners The fixture is designed for use in wet locations and is IP65-rated. When selecting a location for the device, ensure that: it is situated away from public throughfares and protected from contact with people. has adequate ventilation Transportation Always use the supplied packaging for transportation and storage. Release the pan/tilt locks when transporting the fixture. Leaving the pan/tilt locks applied may cause damage to the device. 10

Installation / Rigging WARNING! Always secure elevated devices with a safety cable The G-Spot may be installed in any orientation. Always use 2 clamps to rig the fixture. Lock each clamp with both quarter-turn fasteners. The fasteners are locked only when turned fully clockwise. Always fasten safety cables between the load-bearing support structure and the attachment points on the device. The safety cables must be able to bear at least 10 times the weight of the device. CAUTION: Always use 2 safety wires! Min. safety wire gauge = 5 mm Max. safety wire length (free fall) = 30 cm (11 in.) Make sure the slack of the safety wire is at a minimum. Never use the carrying handles for secondary attachment. 11

Start the rigging process by blocking the work area below, and make sure the work is performed from a stable platform. 1 Check that the rigging clamps are undamaged and can bear at least 10 times the weight of the fixture. Check that the structure can bear at least 10 times the weight fo all installed fixtures, clamps, cables etc. 2 Bolt each clamp securely to a clamp bracket with an M12 bolt (min. grade 8.8) and lock nut. 3 Align an Omega bracket with two 1/4-turns in the base. Insert the fasteners into the base and turn both levers a full 1/4-turn clockwise to lock. Install the second Omega bracket. 4 Working from a stable platform, hang the fixture on a truss, or other structure. Note the position of the head. The front of the fixture is to the right, when looking at the display panel. Tighten the rigging clamps. FRONT 5 Install 2 safety wires that each can bear at least 10 times the weight of the unit. The attachment points are designed to fit a carabiner clamp. 6 Check that the pan/tilt locks are released (A and B). Verify that there are no combustible materials or surfaces to be illuminated within 0.3 m (11 in.) of the fixture, and that there are no flammable materials nearby. 7 Check that there is no possibility of heads or yokes colliding with other units. 12

Connecting AC power The G-Spot can operate on any 200-240V, 50/60 Hz mains power supply Connect the device to power using a cable with a Neutrik powercon TRUE1 connector (supplied with the fixture). Connect both DMX in and DMX out cables in order to maintain the fixtures IP65. Fuse Power In DMX Out DMX In The device must be grounded/ earthed and be able to be isolated from AC power. The AC power supply must incorporate a fuse or circuit breaker for fault protection. Wire Color Brown Blue green/yellow Symbol L N or Conductor live neutral ground (earth) 13

Control panel operations You can configure individual fixture settings, read out data and view error messages in the fixtures graphic display. When the device is powered on, it boots and resets, then displays the DMX start address and any status messages. Using the control panel Click the arrow buttons to scroll up and down menus. Click the OK button to enter a menu or make a selection. Press the ESC button to step backwards through the menus. ESC. OK DMX start address The DMX start address is the first channel used to receive instructions from the controller. For independent control, each fixture must be assigned its own control channels. If you give two devices the same address, they will behave identically. Address sharing can be useful for diagnostic purposes and symmetrical control. Select DMX address using the arrow buttons. 14

Control panel menus 15

Gobo replacement Identification of gobo wheel Gobo Wheel 1 (Closest to lamp) Gobo Wheel 2 (Closest to front lens) Open Open 5 1 5 1 4 2 4 2 3 Magnet 3 21

Replacing rotating gobos To replace one or more gobos: Disconnect the fixture from power and allow to cool. TORX 20 Position the head and apply the tilt lock. Remove rear head cover. Identify gobo wheel covers 1 and 2, see figure below. Remove the relevant gobo wheel cover for access to the gobo wheel. Turn the relevant gobo wheel until the gobo you want to replace is accessible. Unhook the end of the gobo holder and turn the spring. Pull the gobo holder out of the gobo wheel. Insert gobo holder with the new gobo into the wheel. Gobo Wheel 1: No. Description Part No. Open Open gobo 37000001 1 Spin cycle 37005002 2 Ring 37005007 3 Bar 37005008 4 Triangle 37005009 5 Concentric 37005004 Gobo Wheel 2: No. Description Part No. Open Open gobo 37000001 1 Breakup bricks 37005006 2 Spiral leaf 37005010 3 Dots 37005003 4 Kaleidoscope gems 37002001 5 Fire up close 37005001 Cover Gobo Wheel 1 Cover Gobo Wheel 2 22

How to replace a gobo in a gobo holder. Place gobo with silver side towards the light source. Align index mark on the gobo with gobo holder and gobo wheel. Insert the gobo holder as shown below. If necessary, continue replacing gobos one by one as described above. If no further service is necessary, reinstall the gobo wheel cover. To maintain the fixtures IP65 rating, it is important to fasten the gobo covers to 4 Nm. 23

Maintenance When cleaning the fixture, do not use any product that contains abrasives or solvents that can damage plastic or painted surfaces. Use a clean cloth with water and a standard household cleaner. To maintain adequate cooling, fans must be cleaned periodically. 24

DMX protocols Basic mode (24 channels) Channel Name DMX value Description Info 0 7 Closed 8 15 Open 16 151 Strobe Slow -> Fast Default DMX value Fader type 1 Shutter 152 175 Pulse - Open Slow -> Fast 176 199 Pulse - Close Slow -> Fast 200 244 Strobe - Random Slow -> Fast 245 255 Open 10 Snap 2 Intensity 0 255 No light -> Maximum light 0 Fade 3 Red 0 255 No RED -> Maximum color 0 Fade 4 Green 0 255 No GREEN -> Maximum color 0 Fade 25

Basic mode (24 channels) Channel Name DMX value Description Info Default DMX value Fader type 5 Blue 0 255 No BLUE -> Maximum color 0 Fade 6 CTC 7 8 9 10 11 0 4 No CTC 5 255 3200 K -> 10000 K 0 Fade Pan 0 65535 0-540 32767 Fade Tilt 0 65535 0-240 32767 Fade Gobo Wheel 1 (Closest to lamp) 0 20 Open 21 41 Gobo 1-1 Position 42 62 Gobo 1-2 Position 63 83 Gobo 1-3 Position 0 Snap 26

Basic mode (24 channels) Channel Name DMX value Description Info 84 104 Gobo 1-4 Position Default DMX value Fader type 11 Gobo Wheel 1 (Closest to lamp) 105 127 Gobo 1-5 Position 128 191 192 192 No rotation 193 255 0 32767 Gobo Index Gobo Wheel Continuous rotation CW Gobo Wheel Continuous rotation CCW Fast -> Slow Slow -> Fast 12 13 Gobo Wheel 1 Indexing Rotation Shake 32768 32800 46419 46920 32799 46418 46919 60538 No Effect Gobo Continuous rotation CW No rotation Gobo Continuous rotation CCW Fast -> Slow Slow -> Fast 60539 65535 Gobo Shake Slow -> Fast 0 Fade 27

Basic mode (24 channels) Channel Name DMX value Description Info 0 20 Open 21 41 Gobo 2-1 Position 42 62 Gobo 2-2 Position 63 83 Gobo 2-3 Position Default DMX value Fader type 14 Gobo Wheel 2 (Closest to front lens) 84 104 Gobo 2-4 Position 105 127 Gobo 2-5 Position 128 191 Gobo Wheel Continuous rotation CW Fast -> Slow 0 Snap 192 192 No rotation 193 255 Gobo Wheel Continuous rotation CCW Slow -> Fast 28

Basic mode (24 channels) Channel Name DMX value Description Info 0 32767 Gobo Index Default DMX value Fader type Gobo 32768 32799 No Effect 15 Wheel 2 32800 46418 Gobo Continuous rotation CW Fast -> Slow 16 Indexing 46419 46919 No rotation Rotation Shake 46920 60538 Gobo Continuous rotation CCW Slow -> Fast 17 Iris 18 Effect Wheel 60539 65535 Gobo Shake Slow -> Fast 0 200 Open -> Close 201 255 Effects 0 4 Open 5 127 Indexed 128 153 Continuous rotation CW Fast -> Slow 154 179 Continuous rotation CCW Slow -> Fast 0 Fade 0 Fade 0 Fade 29

Basic mode (24 channels) Channel Name DMX value Description Info 18 180 255 Effects 0 4 Open Default DMX value Fader type 19 Prism 20 Frost 5 129 Continuous rotation CW Fast -> Slow 130 130 No rotation 131 255 Continuous rotation CCW Slow -> Fast 0 5 Open 6 255 No Frost -> Maximum Frost 0 Fade 0 Fade 21 Zoom 0 255 Wide -> Narrow 0 Fade 22 Focus 0 255 Far -> Near 0 Fade 30

Basic mode (24 channels) Channel Name DMX value Description Info 0 4 No Effect 5 15 Sync Gobo Rot CV 16 26 Sync Gobo Rot CCV 27 32 Shutter Black = RED 33 38 Shutter Black = GREEN Default DMX value Fader type 23 Effect Channel 39 44 Shutter Black = BLUE 45 50 Shutter Black = WHITE 0 Snap 51 56 Shutter Black = Magenta 57 62 Shutter Black = Yellow 63 68 Shutter Black = Cyan 69 255 Reserved 31

Basic mode (24 channels) Channel Name DMX value Description Info 0 4 No Function Default DMX value Fader type 24 Control Channel 5 9 Full Reset 10 14 Pan Reset 15 19 Tilt Reset 20 24 Gobo Reset 25 29 Zoom Reset Hold 3 seconds Hold 3 seconds Hold 3 seconds Hold 3 seconds Hold 3 seconds 30 34 Sleep See note 35 255 Reserved All other channels must be zero and this has to be held for 30 secs (fixture will wake up on a full reset) 0 Snap 32

Extended mode (30 channels) Channel Name DMX value Description Info 0 7 Closed 8 15 Open 16 151 Strobe Slow -> Fast Default DMX value Fader type 1 Shutter 152 175 Pulse - Open Slow -> Fast 176 199 Pulse - Close Slow -> Fast 200 244 Strobe - Random Slow -> Fast 245 255 Open 10 Snap 2 3 Intensity 0 65535 No light -> Maximum light 0 Fade 33

Extended mode (30 channels) Channel Name DMX value Description Info Default DMX value Fader type 4 5 6 7 8 9 Red 0 65535 No RED -> Maximum color 0 Fade Green 0 65535 No GREEN -> Maximum color 0 Fade Blue 0 65535 No BLUE -> Maximum color 0 Fade 10 CTC 0 4 No CTC 5 255 3200 K -> 10000 K 0 Fade 11 12 Pan 0 65535 0-540 32767 Fade 34

Extended mode (30 channels) Channel Name DMX value Description Info Default DMX value Fader type 13 14 Tilt 0 65535 0-240 32767 Fade 0 20 Open 21 41 Gobo 1-1 Position 42 62 Gobo 1-2 Position 15 Gobo Wheel 1 (Closest to lamp) 63 83 Gobo 1-3 Position 84 104 Gobo 1-4 Position 0 Snap 105 127 Gobo 1-5 Position 128 191 Gobo Wheel Continuous rotation CW Fast -> Slow 192 192 No rotation 35

Extended mode (30 channels) Channel Name DMX value Description Info 15 193 255 Gobo Wheel Continuous rotation CCW Slow -> Fast 0 32767 Gobo Index Default DMX value Fader type Gobo 32768 32799 No Effect 16 Wheel 1 32800 46418 Gobo Continuous rotation CW Fast -> Slow Indexing 17 46419 46919 No rotation Rotation Shake 46920 60538 Gobo Continuous rotation CCW Slow -> Fast 0 Fade 60539 65535 Gobo Shake Slow -> Fast 18 Gobo Wheel 2 (Closest to front lens) 0 20 Open 21 41 Gobo 2-1 Position 42 62 Gobo 2-2 Position 0 Snap 36

Extended mode (30 channels) Channel Name DMX value Description Info 63 83 Gobo 2-3 Position 84 104 Gobo 2-4 Position Default DMX value Fader type 18 105 127 Gobo 2-5 Position 128 191 Gobo Wheel Continuous rotation CW Fast -> Slow 192 192 No rotation 193 255 Gobo Wheel Continuous rotation CCW Slow -> Fast 19 20 Gobo Wheel 2 Indexing Rotation Shake 0 32768 32800 46419 32767 32799 46418 46919 Gobo Index No Effect Gobo Continuous rotation CW No rotation Fast -> Slow 0 Fade 37

Extended mode (30 channels) Channel Name DMX value Description Info 19 46920 60538 Gobo Continuous rotation CCW Slow -> Fast 20 60539 65535 Gobo Shake Slow -> Fast Default DMX value Fader type 21 Iris 0 200 Open -> Close 201 255 Effects 0 4 Open 0 Fade 5 127 Indexed 22 Effect Wheel 128 153 Continuous rotation CW Fast -> Slow 0 Fade 154 179 Continuous rotation CCW Slow -> Fast 180 255 Effects 23 Prism 0 4 Open 0 Fade 38

Extended mode (30 channels) Channel Name DMX value Description Info Default DMX value Fader type 23 Prism 5 129 Continuous rotation CW Fast -> Slow 130 130 No rotation 24 Frost 131 255 Continuous rotation CCW Slow -> Fast 0 5 Open 6 255 No Frost -> Maximum Frost 0 Fade 25 26 Zoom 0 65535 Wide -> Narrow 0 Fade 27 28 Focus 0 65535 Far -> Near 0 Fade 39

Extended mode (30 channels) Channel Name DMX value Description Info 0 4 No Effect 5 15 Sync Gobo Rot CV 16 26 Sync Gobo Rot CCV 27 32 Shutter Black = RED Default DMX value Fader type 29 Effect Channel 33 38 Shutter Black = GREEN 39 44 Shutter Black = BLUE 45 50 Shutter Black = WHITE 51 56 Shutter Black = Magenta 57 62 Shutter Black = Yellow 63 68 Shutter Black = Cyan 0 Snap 40

Extended mode (30 channels) Channel Name DMX value Description Info 29 69 255 Reserved 0 4 No Function 5 9 Full Reset Hold 3 seconds 10 14 Pan Reset Hold 3 seconds Default DMX value Fader type 30 Control Channel 15 19 Tilt Reset Hold 3 seconds 20 24 Gobo Reset Hold 3 seconds 0 Snap 25 29 Zoom Reset Hold 3 seconds 30 34 Sleep See note 35 255 Reserved All other channels must be zero and this has to be hold for 30 secs (fixture will wake up on a full reset) 41

Effects Two independent rotating gobo wheels The two independent rotating gobo wheels has five slots plus one open position on each to control the shape of emitted light. Each gobo is indexable with bi-directional rotation. The standard gobo set includes both breakup patterns, geometric gobos and full colored gobos. Effect wheels The G-Spot has two effect wheels for generating optical effect. The two effect wheels operate as an extension to one another for achieving continuous animation effect. High-precision pan and tilt The G-Spot has a 16-bit pan and tilt control, with a 540 pan and 270 tilt movement with feedback. Ultra high-speed strobe effect The ultra high-speed strobe effect (1-50 Hz) introduces instant color control and the possibility to strobe between two or more colors at any speed by. Random strobe and pulse effects can be generated with variable speed. 42

Focus, zoom and iris The focal length of the zoom lens provides an optics zoom range from 8 to 43. The iris provides a pseudo zoom effect down to 1. The auto-focus maintains focus when focal length changes. Prism 4-facet rotating prism. Frost The soft high-quality frost filter is variable from 0% to 100%. 43

Specifications PHYSICAL Length x Width (base)... 470 x 492 mm (18.5 x 19.4 in.) Length x Width (head)... 585 x 458 mm (23 x 18 in.) Height (head straight up)...805 mm (31.6 in.) Height (maximum)...821 mm (32.3 in.) Weight... 52 kg (114 lbs.) CONSTRUCTION Housing...Aluminium/Steel/Plastic PA6.6 IP Class... IP65 INSTALLATION Orientation...Any Mounting points... Four quarter-turn locking points Safety features...minimum distance to combustible materials: 0.3 mtr (11 in.)...minimum distance to illuminated surfaces: 0.3 mtr (11 in.) OPERATING CONDITIONS Ambient temperature range (T a )... -10 C to 40 C (14 F to 104 F) Operating humidity...98% 44

PROGRAMMING AND CONTROL Protocol... USITT DMX512A Setting and addressing... Control panel, RDM or RFID Wireless DMX... LumenRadio with RDM 16-bit control... Dimmer, Tilt and Pan Color temperature control... Linear CTO/CTB DMX channels... 24/30 CONNECTIONS AC power input... Neutrik true1 power input connector DMX data in/out... IP65 Neutrik HD locking XLR 5-pin cable, 0.2m (7.8 in) ELECTRICAL AC Power, nominal... 200-240V 50/60 Hz AC Power, max. rating... 190-264V 50/60 Hz Power supply unit... Auto-ranging electronic switch-mode Main fuse... T12A-250V Max. power consumption...1100 W Standby power...75 W 45

OPTICS Light source... High power RGBY LED LEDs expected lifetime... 50,000 hours Zoom range 16 bit... 8 to 43 + pseudo zoom 1 to 43 Focus... Auto focus Prism... 4-facet rotating prism Frost... Variable 0% - 100% PHOTOMETRIC Total output... 17,000 lumen Color temperature range... 2000K - 10000K CRI at White 9000 Kelvin... >85 CRI at White 5000 Kelvin... >80 Efficacy...15.5 lm/w GOBOS Outside diameter... 37.5 mm Maximum image diameter... 32 mm Maximum thickness... 1.1 mm black&white or 3.5 mm colored glass Glass gobo...borosilicate high temperature glass Metal gobo... Not recommended 46

FEATURES Iris... 1-100%, Pulse effects Dimming... Electronic Strobe...Ultra-high-speed strobe effect (1-50 Hz) Pan/Tilt... 540 / 270 Gobo wheels... 2 independent rotatable gobo wheels: Gobo wheel 1: 5 indexable gobos + open Gobo wheel 2: 5 indexable gobos + open Effect wheels... 2 independent effect wheels with semi-continuous effect APPROVALS AND CERTIFICATIONS Conforms to... 2004/108/EC: EMC Directive Conforms to... 2006/95/EC: Low Voltage Directive Conforms to...2011/65/eu: RoHS2 Directive Specifications subject to change without notice 47

User s notes 48

SGM A/S Sommervej 23 8210 Aarhus V Denmark Tel +45 70 20 74 00 info@sgmlight.com www.sgmlight.com