Date: Quantity: Company: Project: Media Tube HO RGBW Media Tube HO family is a range of versatile media border lighting system for media façade application. It comes with the variety of LED options and accessories, and also provides a standardized platform for any custom-made request such as control channels, LEDs combination and mounting accessories, etc 48V DC Product Specifications Direct View Diffused Pixels 12PXL 24PXL 36PXL 48PXL 60PXL 12PXL 24PXL 36PXL 48PXL 60PXL Light Source (LEDs) Color Range High intensity SMT RGB and White LEDs 16.7 Million additive RGB colors; White CCT 6500K Beam Angle 110 175 Luminous Flux 1 572 lm / m 408 lm / m Efficacy 1 41 lm / W 33 lm / W Cover Lens Clear Cover (PC) Diffuser (PC) LED Cluster & Pixel Pitch 2 Auto-White Housing Dimensions (W H) (L) 25mm Algorithms enable auto control of white LED by 3-channel RGB values Aluminium housing 23mm 36mm 0.9 1.4 296mm 12 596mm 24 896mm 36 1196mm 48 1496mm 60 29mm 54mm 1.1 2.1 296mm 12 596mm 24 896mm 36 1196mm 48 1496mm 60 Weight 0.36kg 0.8lbs 0.58kg 1.3lbs 0.8kg 1.8lbs 1.02kg 2.3lbs 1.24kg 2.7lbs 0.4kg 0.9lbs 0.52kg 1.2lbs 0.84kg 1.9lbs 1.06kg 2.3lbs 1.28kg 2.8lbs Regulatory Listing & Safety Approval CE Operating Temperature 30 C to +60 C / 22 F to +140 F Storage Temperature 40 C to +70 C / 40 F to +158 F Environment Outdoor, IP66, IK09, suitable for coastal environments Humidity 0~90%, non-condensing Electrical Specifications Operating Voltage Power Consumption (Typical) 48V DC 4.6W 8.6W 12.5W 16.6W 20.9W 4.6W 8.6W 12.5W 16.6W 20.9W System Specifications Power/Data Interface Control Power Supply TX CONNECT DMX / e:pix / DVI Capable LED Engine 1000W 48V Indoor / LED Engine 240W 48V Outdoor / LED Engine 320W 48V Outdoor LED Engine 100W 48V Outdoor Addressing Options Auto-Addressing 1. Based on photometric data and typical power consumption of Media Tube HO RGBW 1496mm 2. Pixel pitch is configurable via ActionPad LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. Product Specification 04/17 V1.7 1 of 13
Photometrics Source Specifications Source 60 LED clusters Optics 110 Cover Lens Clear PC Cover Candela Distribution Cd: 0 66.64 133.27 199.91 266.54 90 75 60 Light Output Color Luminous Flux (lm) Full ON 859.40 White 423.30 RGB 450.10 Red 131.36 Green 294.90 Blue 34.70 333.18 0 15 30 45 Illuminance at a Distance Center Beam LUX V Beam Width H 2m 82.12 5.4m 5.7m 4m 20.53 10.9m 11.4m 6m 9.12 16.3m 17.2m 8m 5.13 21.7m 22.9m 10m 3.28 27.2m 28.6m 12m 2.28 32.6m 34.3m Vert.Spread: 107.3 Horiz.Spread: 110.1 IES and LDT files are available for download from the Traxon website. Product Specification 04/17 V1.7 2 of 13
Photometrics Source Specifications Source 60 LED clusters Optics 175 Cover Lens PC Diffuser Candela Distribution Light Output Cd: 0 26.76 53.53 80.29 90 75 60 Color Luminous Flux (lm) Full ON 611.94 White 296.84 RGB 328.75 Red 97.72 Green 214.95 Blue 26.53 107.05 133.82 0 15 30 45 Illuminance at a Distance Center Beam LUX V Beam Width H 2m 32.60 105.3m 6.1m 4m 8.15 210.6m 12.2m 6m 3.62 315.9m 18.3m 8m 2.04 421.2m 24.4m 10m 1.30 526.5m 30.4m 12m 0.91 631.9m 36.5m Vert.Spread: 175.7 Horiz.Spread: 113.5 IES and LDT files are available for download from the Traxon website. Product Specification 04/17 V1.7 3 of 13
Dimensions Media Tube HO RGBW Direct View 296mm, 596mm, 896mm, 1196mm, 1496mm / 11.7, 23.5, 35.3, 47.1, 58.9 Quick Lock Input Cable Quick Lock Output Cable 69mm / 2.7 109mm / 4.3 With Mounting Bracket 25mm / 1 23mm / 0.9 51.5mm / 2 36mm / 1.4 63mm / 2.5 30mm / 1.2 24mm / 0.94 33mm / 1.3 With Mounting Bracket 10mm / 0.4 6.5mm / 0.25 Product Specification 04/17 V1.7 4 of 13
Dimensions Media Tube HO RGBW Diffused 296mm, 596mm, 896mm, 1196mm, 1496mm / 11.7, 23.5, 35.3, 47.1, 58.9 Quick Lock Input Cable Quick Lock Output Cable 69mm / 2.7 109mm / 4.3 With Mounting Bracket 25mm / 1 29mm / 1.14 29mm / 1.14 81mm / 3.2 54mm / 2.1 81mm / 3.2 30mm / 1.2 33mm / 1.3 With Mounting Bracket 10mm / 0.4 6.5mm / 0.25 Product Specification 04/17 V1.7 5 of 13
Mounting Mounting with Mounting Brackets Lock with screw 6mm screw 2 (included) Mounting with Mounting Studs 23mm / 0.9 23 mm/ 0.9 M6 Screw Screw (Not included) 2 (Not included) Inner Thread 10mm / 10mm / 0.4 (min.) Product Specification 04/17 V1.7 6 of 13
System Diagram 1000W PSU with 7A Fuse per Daisy Chain System Diagram Meanwell Power Supply Unit 3x 48V DC 1kW LED Engine 1000W 48V - single terminal Wago Terminal block set (7A) TU.AC.0602000 BACK PSU Rack for LED Engine 1000W 48V (Houses 3 x LED Engine 1000W 48V) 3x 1kW Rackmount PSU Ring connectors can power up to 146.4m tubes (18.3m x 8) to fit M5 terminal Wago Terminal block set on PSU Interconnection Example: POWER INJECTION WAGO terminal blocks LCE2 fx on 35mm wide DIN rail Quick Lock Power/Data Injector Cable TU.AC.0600800 CABLE A Fuse: 7A Slow blow x 2 AWG0~6 Ø5 x 20mm Injecting power for next daisy chain. DVI Source Ethernet Source CABLE C Note: Common the GND Wago terminal blocks using adjacant jumpers. Power Distribution Blocks Power distribution block to Wago Terminal Block CABLE D AWG12~14 (1m max) 48V DC GND Quick Lock Starter Cable POWER: AWG17 DATA: AWG24 TUBES ARE DAISY CHAINED Interconnection cable 281-309 WAGO Part no. (cover plate) 281-611/281-542 281-611 Ethernet Switch 280-309 (cover plate) 280-901 281-402 249-117 (End stopper) Video Micro Converter (VMC) DVI IN (DVI-D/DVI-I) DVI OUT DVI IN (DVI-D/DVI-I) DVI OUT CAT5 DATA CABLE (UTP AWG24) GND Maximum 8 outputs Maximum 1536 channels per output CABLE B Signal 48V Ground Wire Size For CABLE C Color Brown White Black Blue Daisy-chained LED Tubes Max. 732 LED clusters (e.g. 12 x 1.5m tubes and 1 x 0.3m tube*) Total 2928 DMX512 channels (4 channels / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures is 96 for DMX signal / 32 for e:pix signal. Actual no. vary according to cable lengths and signal source. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Daisy-chained VMCs Max. units per chain: 8 Use DVI splitter for further VMC chain See VMC specification for more information RJ45 Plug Pin 3: GND Pin 2: Pin 1: Starter Cable End Cap Product Specification 04/17 V1.7 7 of 13
System Diagram BACK Meanwell Power Supply Unit 3x 48V DC 1kW Ring connectors to fit M5 terminal on PSU 3x 1kW Rackmount PSU can power up to 143.1m tubes (15.9m x 9) LED Engine 1000W 48V - single terminal PSU Rack for LED Engine 1000W 48V (Houses 3 x LED Engine 1000W 48V) From Power/Data source To fixture + Note: Markings on Wago terminal blocks indicate polarity of fuse blocks. Connection point obscured by fuse block + Wago Terminal block set DVI Source Ethernet Source CABLE C Power Distribution Blocks Power distribution block to Wago Terminal Block CABLE D AWG12~14 (1m max) + 48V DC GND WAGO Part no. 281-611/281-542 Quick Lock Starter Cable POWER: AWG17 DATA: AWG24 TUBES ARE DAISY CHAINED Interconnection cable Ethernet Switch 281-309 (cover plate) 281-335 (cover plate) + 281-656 and 281-512/281-416 (Fuse block) 280-901 280-309 (cover plate) 249-117 (End stopper) Video Micro Converter (VMC) DVI IN (DVI-D/DVI-I) DVI OUT DVI IN (DVI-D/DVI-I) DVI OUT CAT5 DATA CABLE (UTP AWG24) GND Maximum 8 outputs Maximum 1536 channels per output CABLE B Signal 48V Ground Wire Size For CABLE C Color Brown White Black Blue Daisy-chained LED Tubes Max. 636 LED clusters (e.g. 10 x 1.5m tubes and 1 x 0.9m tube*) Total 2544 DMX512 channels (4 channels / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures is 96 for DMX signal / 32 for e:pix signal. Actual no. vary according to cable lengths and signal source. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Daisy-chained VMCs Max. units per chain: 8 Use DVI splitter for further VMC chain See VMC specification for more information RJ45 Plug Pin 3: GND Pin 2: Pin 1: Starter Cable End Cap 1000W PSU with 6A Fuse per Daisy Chain System Diagram Interconnection Example: POWER INJECTION WAGO terminal blocks LCE2 fx on 35mm wide DIN rail Quick Lock Power/Data Injector Cable Fuse: TU.AC.0600800 CABLE A 6A Slow blow x 2 Ø5 x 20mm AWG0~6 Injecting power for next daisy chain. Product Specification 04/17 V1.7 8 of 13
System Diagram 320W PSU System Diagram INDOOR OUTDOOR Installation engineer should use appropriate plugs for outdoor connection. 300mm AC In DMX In LED Engine 320W 48V POWER/DATA INJECTION Quick Lock Power/Data Injector Cable TU.AC.0600800 Injecting power for next daisy chain. RJ45 / Power to Quick Lock Injector Cable Kit TU.AC.0600400 TUBES ARE DAISY CHAINED Signal 48V Ground Wire Size Color Brown White Black Blue Daisy-chained LED Tubes Max. 516 LED clusters (e.g. 8 x 1.5m tubes and 1 x 0.9m tubes*) Total 2064 DMX512 channels (4 channels / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures is 96 for DMX signal / 32 for e:pix signal. Actual no. vary according to cable lengths and signal source. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Starter Cable End Cap Product Specification 04/17 V1.7 9 of 13
System Diagram 240W PSU System Diagram INDOOR OUTDOOR Installation engineer should use appropriate plugs for outdoor connection. 300mm AC In DMX In LED Engine 240W 48V PS.OB.0011002 POWER/DATA INJECTION Quick Lock Power/Data Injector Cable TU.AC.0600800 Injecting power for next daisy chain. RJ45 / Power to Quick Lock Injector Cable Kit TU.AC.0600400 TUBES ARE DAISY CHAINED Signal 48V Ground Wire Size Color Brown White Black Blue Daisy-chained LED Tubes Max. 396 LED clusters (e.g. 6 x 1.5m tubes and 1 x 0.9m tubes*) Total 1584 DMX512 channels (4 channels / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures is 96 for DMX signal / 32 for e:pix signal. Actual no. vary according to cable lengths and signal source. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Starter Cable End Cap Product Specification 04/17 V1.7 10 of 13
System Diagram 100W PSU System Diagram INDOOR OUTDOOR Installation engineer should use appropriate plugs for outdoor connection. 300mm AC In DMX In LED Engine 100W 48V PS.CU.0000008 POWER/DATA INJECTION Quick Lock Power/Data Injector Cable TU.AC.0600800 Injecting power for next daisy chain. RJ45 / Power to Quick Lock Injector Cable Kit TU.AC.0600400 TUBES ARE DAISY CHAINED Signal 48V Ground Wire Size Color Brown White Black Blue Daisy-chained LED Tubes Max. 156 LED clusters (e.g. 2 x 1.5m tubes and 1 x 0.9m tube*) Total 624 DMX512 channels (4 channels / pixel) Data Injector is needed when connection has more than 1 universe. This wiring diagram shows only typical connections. Actual wiring depends on LED Tube configuration and installation. *Max. no. fixtures is 96 for DMX signal / 32 for e:pix signal. Actual no. vary according to cable lengths and signal source. Please consult your local Traxon office for aid. TUBE INTERCONNECTION Starter Cable End Cap Product Specification 04/17 V1.7 11 of 13
Ordering Model Number TU. XX. N 1 NN 0 0 1 Cover Lens Length Pixels per Tube CS: Direct View 1: 296mm (12 ) 12: 12PXL / tube DS: Diffused 2: 596mm (24 ) 24: 24PXL / tube 3: 896mm (36 ) 36: 36PXL / tube 4: 1196mm(48 ) 48: 48PXL / tube 5: 1496mm(60 ) 60: 60PXL / tube Fixtures Model No. Description Item Code TU.CS.1112001 Media Tube HO Direct View 296 RGBW 12PXL AB440850055 TU.CS.2124001 Media Tube HO Direct View 596 RGBW 24PXL AB440780055 TU.CS.3136001 Media Tube HO Direct View 896 RGBW 36PXL AB440860055 TU.CS.4148001 Media Tube HO Direct View 1196 RGBW 48PXL AB440790055 TU.CS.5160001 Media Tube HO Direct View 1496 RGBW 60PXL AB440800055 TU.DS.1112001 Media Tube HO Diffused 296 RGBW 12PXL AB440820055 TU.DS.2124001 Media Tube HO Diffused 596 RGBW 24PXL AB440870055 TU.DS.3136001 Media Tube HO Diffused 896 RGBW 36PXL AB440830055 TU.DS.4148001 Media Tube HO Diffused 1196 RGBW 48PXL AB440880055 TU.DS.5160001 Media Tube HO Diffused 1496 RGBW 60PXL AB440840055 Standard Accessories (Included in delivery) Model No. Description Item Code N/A 2 x Mounting Brackets, 2 x Screws, 2 x Bolts and Assortment of Nuts and Washers N/A Optional Accessories Model No. Description Item Code TU.AC.0600000 Quick Lock Connector End Cap AB452180055 TX Control Model No. Description Item Code 160185 Video Micro Converter (DMX/e:pix) AA438940235 160194 Video Micro Converter Garage (Optional) AA623920031 EN.BP.0000100 Butler Pro DMX/RDM AA628600035 EN.BP.0000200 Butler Pro e:pix AA628610035 EN.BX.0000001 Butler XT2 AA557270131 160174 Butler XT2 Garage (Optional) AA556660031 EN.BU.0000001 Butler S2 AB436200031 AC.BG.0000001 Butler S2 Garage (Optional) AA611800031 EN.LC.9400000 LCE2 fx AA629460035 Product Specification 04/17 V1.7 12 of 13
Ordering TX Connect Model No. Description Item Code TU.AC.0600100 Quick Lock Starter Cable (Open Wire), 5m (17AWG) AB452190055 TU.AC.0600200 Quick Lock Starter Cable (Open Wire), 20m (17AWG) AB452200055 TU.AC.0600300 Quick Lock Starter Cable (Open Wire), 35m (17AWG) AB452210055 TU.AC.0600400 RJ45 / Power to Quick Lock Injector Cable Kit AB452220055 TU.AC.0600500 Quick Lock Interconnection Cable, 0.14m AB452230055 TU.AC.0600600 Quick Lock Interconnection Cable, 1.5m AB452240055 TU.AC.0600700 Quick Lock Interconnection Cable, 4m AB452250055 TU.AC.0600800 Quick Lock Power/Data Injector Cable AB452260055 TU.AC.0000201 WAGO Terminal Block Set (6A) AA556430135 TU.AC.9900000 6A SB Fuse (100pcs) AA612880055 TU.AC.0602000 WAGO Terminal Block Set (7A) AB469230035 TU.AC.0602100 7A SB Fuse (100pcs) AB469240055 TX Control Model No. Description Item Code PS.IE.0011100 LED Engine 1000W 48V Indoor AA5571401HA PS.AC.0500100 LED Engine Garage (for 3 pcs 1000W Indoor PSU) AA6294800HA N/A LED Engine 320W 48V Outdoor AM088070055 PS.OB.0011002 LED Engine 240W 48V Outdoor AA5572601HA PS.CU.0000008 LED Engine 100W 48V Outdoor AA766150055 Product Specification 04/17 V1.7 13 of 13