D-COAX, Inc. D-COAX d086 Series Cable Pair. High Frequency, Skew Matched, Phase Stable Cable Pair (65 GHz)

Similar documents
D-COAX, Inc. D-COAX Male-Female 1501 Series Cables and Cable Pairs. High Frequency, Skew Matched, Phase Stable Cable Pair (40 GHz)

75 Ohm N Male Connector Crimp/Solder Attachment for RG6

Low Loss RG 402 Equivalent

MPI Cable Selection Guide

75 Ohm BNC Male Connector Crimp/Solder Attachment for PE-B159, 1855A, Mini 59

Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore

Series MCX 50 micro miniature connectors

SMA - 50 Ohm Connectors

SMA One Piece Semi-Rigid Connectors

Non Magnetic Connectors

Coaxial Cable Termination

SERIES BNC 50, COAXIAL MINIATURE CONNECTORS

TNC Connectors. RF Coax Connectors. Product Facts

MCX - 75 Ohm Connectors

HN Connectors. Automatic Connector. Introduction. Contents. 631/ FAX 631/

ULTIMATE SNAP-N-SEAL

Non Magnetic Connectors Product Catalog

HDSI Series Tensolite High-Performance Cable & Interconnect Systems

Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

SUHNER QMA SUBMINIATURE CONNECTORS

PREMIUM 5e F/UTP PRODUCTS

Type "N" Connectors. Type "N" Interface Dimensions

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

Processing Specification MiniBridge IDC

FLAT AND ROUND CABLE PRODUCT DESCRIPTION DESIGN ADVANTAGES. IDC Systems Cable

SHIELDED DIGITAL CABLES (1249C SERIES)

bmam connectors DIVIDER PAGE

RF/Microwave Connectors & Cable Assemblies

Automatic Connector MHV Connectors MHV Introduction MHV series connectors Contents Polarized mating interfaces Anti-Rock mating interfaces

Materials Connector part Material Finish

HDRFI Series Tensolite High-Performance Cable & Interconnect Systems. High Density RF Interconnect

AMERICAN NATIONAL STANDARD

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE Specification for F Connector, Male, Pin Type

PATCH CORDS, PLUGS & CABLES

MCX Miniature Coaxial Connectors

QMA and QN connectors, patented products, become some real standard for the RF Telecommunications industry.

INSTRUMENT CABLES STUDIO SERIES PATCH CABLES

ENGINEERING COMMITTEE Interface Practices Subcommittee. ANSI/SCTE (Formerly IPS SP 001)

CATEGORY 6A CABLING SOLUTIONS

Detailed Specifications & Technical Data

STRUCTURED CABLING SYSTEMS (SCS)

Materials Connector part Material Finish

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2)

SECTION 10 BNC / BNC 75 HDTV / BNC-TRX R141 / R142 / R266

Stainless Steel SMA Connectors Product Catalog

Radiation-crosslinked,

ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES

Pre-terminated cabling system Modular cassette technology with 6x RJ45 C6 A ports

CATEGORY 6A CABLING SOLUTIONS

Low Mass SpaceWire Cable ITT AO/1-6214/09/NL/LvH

C Connectors. Automatic Connector. Introduction. Contents. C Interface Options. 631/ FAX 631/

SECTION 9 BNC/BNC 75 HDTV/BNC-TRX R141/R142/R266 SIMPLIFICATION IS OUR INNOVATON. Visit for more information

Description: Pair Color Code Chart: Pair Color Chart 1 Brown White Brown 2 Orange White Orange 3 Green White Green 4 Blue White Blue.

RF CONNECTORS RFC SERIES

Highlights: Cables & Adaptors. Stock Cable Assemblies Custom Cable Assemblies Multi-conductor Cables Patch Panels Connector Adaptors

ENGINEERING COMMITTEE

BUS UNITRONIC BUS CAN

Adapter Selection. Entry Size (Continued) Table E. Multiplication. factors for wire bundles. with Equal Size Wires. This table provides multiplication

Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

1 1/2 13.5, 625 JCASS)

SERIES HPQN CONNECTORS

RF CONNECTORS. Adam Technologies, Inc. ORDERING INFORMATION 1 01 D RoHS RFC SERIES INSULATOR A V A I L A B L E

Part Number (used with PRO-CRIMPER Tool Frame ) for 50 Ohm BNC Dual Crimp MIL Type Connectors

RF SYSTEMS. Rugged. Fast. Diverse.

8D with High Frequency Coaxial Contact

GenSPEED 10 MTP Category 6A Cable An Unshielded 6A Cable with Superior Protection Against Alien Crosstalk

ModWright Instruments, Inc. PH 150 Tube Phono Stage Owner s Manual

10 Mb/s Single Twisted Pair Ethernet Preliminary Cable Properties Steffen Graber Pepperl+Fuchs

About Nexans 3. About Berk-Tek 4. LANmark-1000 Cat 6 UTP 5. LANmark-1000 Category 6 Plenum 6. LANmark-1000 Category 6 Riser 11

Keysight Technologies M8048A ISI Channels

PERFORMANCE SPECIFICATION SHEET

Safe, Accurate, and Repeatable

1672A. Product Description. Product Specifications. Technical Specifications. Conductor. APAC Standard. Bend Radius.

PAM-1840 Preamplifier Operation Manual

Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2)

VALHALLA 2. Reference Cables

CATEGORY 6 CABLING SOLUTIONS

The Custom Interconnect Leader TM

Your Network Has Evolved. So Has Our Cable.

PERFORMANCE SPECIFICATION SHEET CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2)

Mining and Petrochemical Fiber Optic Cables

WiFi Interface Identifier from RF Industries

CATEGORY 5e CABLING SOLUTIONS

Series SK (2.92 mm) prec. submini. connectors

COLORED CATEGORY 5e BULK CABLE, SOLID-CONDUCTOR PATCH CABLE, & CATEGORY 5e BACKBONE CABLE

Professionally Install Products Right the First Time. TOOL-CRIMP Radial Linear compression tool for BNC, F & RCA connectors

10G 6A F/UTP SYSTEM PRODUCTS 10G 6A F/UTP

cables MAKING THE CONNECTION

PRODUCT INFORMATION. ETHERLINE EC Flex Cat.5e M8

ELECTRICAL PERFORMANCE REPORT

ASNT_PRBS20B_1 18Gbps PRBS7/15 Generator Featuring Jitter Insertion, Selectable Sync, and Output Amplitude Control

RESIDENTIAL CONNECTION OMMERCIAL EXPERT CABLING SAE CATALOG

Multi-Media Installation Guide

Amphenol RF Connectors

HARTING Ethernet cabling cables and connectors, 4 wire

HexPort Multi-Band Antenna

How Wire Fails Originally presented to the Society of Motion Picture and Television Engineers Convention, Sydney, Australia, on Friday, July 4, 1997.

Transcription:

D-COAX, Inc. D-COAX d086 Series Cable Pair High Frequency, Skew Matched, Phase Stable Cable Pair (65 GHz) D-COAX d086 Series Cable Pair consists of two skew matched (to 1ps) flexible cable assemblies with 1.85 mm male connectors on both ends. The d086 series cable is a low loss and phase stable cable. This cable utilizes silver plated copper conductor, with a very low loss expanded PTFE dielectric. The shield consists of two conductive layers: the first layer is a silver plated copper flat wire, applied in such manner that it yields low contact resistance resulting in low insertion loss, the second layer is a silver plated copper braided shield that contributes to excellent RF leakage characteristics, specified at > -100 db to 18 GHz. The standard outside jacket is a tough, resin melt extruded ETFE. This assembly uses impedance-matched 1.85mm connectors to accomplish low return loss up to 65 GHz. These assemblies will make great and cost effective test cables. D086 Series cable pair is available in custom lengths also. 1

Features and Benefits Flexibility Durability RF performance ½ inches bend radius Multi-layer outer braid Outside jacket is a tough, extruded ETFE Center conductor is silver-plated solid copper Inner shield is silver-plated copper flat wire Outer shield is a round silver-plated copper Dielectric expanded PTFE 1ps skew match Phase Stable Low insertion loss Low return loss High bandwidth Specification* Electrical Characteristic Impedance Max Frequency Phase stability with bending Amplitude stability with bending Capacitance (cable) Skew Matched Attenuation/ Insertion Loss Return loss Shielding effectiveness Power Handling 50-Ohm 65GHz 20-degrees max (IEC 60966-1 method) 0.22 db max (IEC 60966-1 method) 27 pf/foot 1ps Less than 5.9dB Better than 15 db > -100 db to 18 GHz < 30 Watts @ 65GHz (Cable) Mechanical Overall Length Cable outside diameter Connector type Bend Radius Connector Retention Center Conductor Retention Weight Temperature Range Available in 12 inch, 24inch, 48 inch, or custom lengths 0.096 inch Number of connections > 2,000 Male or Female 1.85 mm compatible connector ½ inches (centerline) 16 lb. (straight pull) 10 lb. (straight pull) 25g (12-inch assembly), 36g (24-inch assembly), 48g (48-inch assembly) -40 to +100 degree Celsius * Data, design and specifications depend on individual process conditions and can vary according to equipment configurations. Not all specifications maybe valid simultaneously. 2

Physical Dimensions Series d086 cable dimensions (all dimensions in inches, A is variable length of the assembly) Typical Performance S-parameters performance of 24inch cable 3

Phase change with bending (degrees) Typical Performance (continued) Phase Stability with bending for 24 inch cable pair per IEC 60966-1 specifications 15 Phase Stability of 65GHz, d086 cable, 24 inches long, 1.85mm connectors, using the IEC 60966-1 proceedure for electrical change with bending 19.74 degrees at 62.88GHz 10 5 0-5 -10 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Frequency (GHz) 2ft d086 2ft d086 plus180 2ft d086 minus180 2ft d086 return 4

Insertion loss change with bending (db) Typical Performance (continued) Amplitude Stability with bending for 24 inch cable pair Per IEC 60966-1 specifications Amplitude stability of 65GHz, d086 cable, 24 inches long, 1.85mm connectors, using the IEC 60966-1 proceedure for electrical change with bending 0-0.5-1 -1.5-2 -2.5-3 -3.5-4 -4.5-5 -5.5-6 -6.5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 Frequency (GHz) 0.20dB at 62.48GHz 2ft d086 begin 2ft d086 plus180 2ft d086 minus180 2ft d086 return 5

Applications The d086 Series Cable Pair is ideal for: Signal Integrity Chanel Modeling Jitter Measurements Differential Measurements VNA measurements Replacement for semi-rigid cable Ordering Information Standard Length Cable Pairs: Part Number Description Length 600-00175-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Male, Straight/Straight 12 600-00176-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Male, Straight/Straight 24 600-00177-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Male, Straight/Straight 48 600-00181-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Female, Straight/Straight 12 600-00182-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Female, Straight/Straight 24 600-00183-00 65 GHz d086 Series Cable Pair, 1.85 mm Male/Female, Straight/Straight 48 Custom lengths are available. D-COAX, Inc. Corporate Headquarters Phone: (503) 922-2436 Email: info@d-coax.com 6