Metal Theft Taskforce Identification Booklet

Similar documents
Metal Theft Taskforce Identification Booklet. Version 2

Contact Details. British Transport Police: (24 hours) Crimestoppers: In association with:

Instrumentation & copper telecom cables

Cable installation guidelines

SWA Cable BS6724 Steel Wire Armoured LSZH Eland Product Group A9L

Optical Fibre Cable Technical Specification. Duct Cable GYFTY-24,48,72,144,216B1.3

MESP TECHNICAL SPECIFICATION FOR ELECTRIC CABLE 400mm 2 ALUMINIUM CONDUCTOR 1.9kV XLPE INSULATED WITHOUT METALLIC SCREEN

Identification - electrical services

Welcome to the latest edition of the Telstra Cable Guide.

2179-CD Series Fiber Optic Splice Closure. Installation Instructions

Identification of LV Cables


SWA Cable - BS5467 Steel Wire Armoured PVC Eland Product Group A9S

3M Fiber Optic Splice Tray 2527 with 3M PLC Optical Splitter

Draft for Public Comment

SJOF-BS604B. Fiber Optic Splice Closure User Manual Rev.1

NC-1000 INSTALLATION MANUAL NC-1000 FIBRE OPTIC CROSS-CONNECTION SYSTEM

3M Cold Shrink Splice Kit QS-III 5416A

Our cables at: ATHENS AIRPORT PIRAEUS PORT TUNNEL IN PARIS NATIONAL PETROLEUM OIL COMPANY

Instructions. Cable with Armor F CAUTION. October Rev A

SPECIFICATION 192F SM LOOSE TUBE, DRY CORE MINI CABLE

Instrumentation Cables

Register your product and get support at SDV5122/27. EN User manual

3M Cold Shrink Splice Kit QS-III 5514A

European List of Standard Grades for Recovered Paper and Board. Remade Scotland. June Report Prepared for:

Bharat Heavy Electricals Limited HIGH PRESSURE BOILER PLANT, TIRUCHIRAPPALLI CONTROLS AND INSTRUMENTATION/FB

OPTICAL FIBRE CABLES. for very-high bit transmission and FTTx networks

NZQA unit standard version 3 Page 1 of 7. Demonstrate knowledge of telecommunications cable systems

3M Cold Shrink Splice Kit QS-III 5515A

2178 Fiber Optic Splice Case and 2181 Cable Addition Kit

- Outdoor & Indoor Telephone Cables - Fiber Optic Cables - Electronic Control Cables - Control Cables - Data/LAN Cables - Coaxial Cables

Medium Voltage 12/20 (24)kV NF C cable system. Xavier Brosse Luanda May 2009

3M Cold Shrink QS4 Integrated Splice Kit QS4-35TS

3M Cold Shrink Foldback Splice Jacket Kit

3M Cold Shrink QS-III Silicone Rubber Splice Kit 5488A-TOW/WOT

Effective earthing of screened cables

Gear up for the future.

2178-L/S Series Fiber Optic Splice Case with Gasket

Road cables. The foundation for a reliable traffic infrastructure.

SPECIFICATION 96F SM LOOSE TUBE, DRY CORE MINI CABLE

3M Fiber Optic Closure System LL

SPECIAL SPECIFICATION 6559 Telecommunication Cable

HARTING Ethernet cabling cables and connectors, 4 wire

PEM1124ENG ENGLISH. STK TERMINATION KIT FOR PLASTIC CABLE WITHOUT ARMOURING 1 kv STKR TERMINATION KIT FOR PLASTIC CABLE WITH ARMOURING 1 kv

SPECIAL SPECIFICATION 8540 Telecommunication Cable

Stratos Duo RGB. User Manual. Order code: EQLED371

Revision No. 4 Page No. Page 1 of 7

LEGEND POWER SYSTEMS

Cold Shrink Three-Conductor Splice Kit QS-III for use on Armor and Non-Armor Cables Instructions IEEE Std kv Class 250 kv BIL

ECS COMBINED CUT-OUT AND CT CHAMBER INSTALLATION

ENGINEERING COMMITTEE Interface Practices Subcommittee SCTE Test Method for Cable Weld Integrity

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN-4/0-500

Compact Module. Category 6 FTP Cabling System

Mid-Span Access of Loose-Tube Ribbon Fiber Optic Cable

CR-R880-BL: Indoor/Outdoor Proximity Reader with 10cm (4in) read range

Mediacom Upgrade/Splicing Procedures (based on original document from Corporate dated 4/16/98)

SAQCC FIRE D&GS TRAINING SUB COMMITTEE COURSE CURRICULUM

Purchase Now ANSI/ICEA S

Interface Practices Subcommittee SCTE STANDARD SCTE Test Method for Drop Cable Center Conductor Bond to Dielectric

Spec No.: ZTT Revision: 2 Date: Oct 3, Designer. Senior Technical Manager. Approver. Chief Technical Engineer

Public Works Division Lighting District Fiber Optic Specifications April 2009

3 SLiC Aerial Closure with Rubber End Seal

Siam Pacific Electric Wire & Cable Co., Ltd.

3M Cold Shrink QS4 Integrated Splice Kit QS4-15JCN

ETSI ES V1.1.1 ( )

Gel-sealed in-line fiber optic closure

Quante BPEO Splice-Protection Closure for Optical Fiber Cables. Features Advantages Benefits

ORDER CODE: EQLED65 USER MANUAL

TFT-150R-G. Tape Shield Cable (page 2) Suggested Installation Equipment (not supplied with kit) Wire Shield Cable (page 7)

A Comparison of Dry Versus Gel Filled Optical Cables

3 Foam Sealed Closure 2" (50 mm) with Compound Compression

MSF1000. MSF Radio Time Code Receiver. User Manual Version 1.1. World Time Solutions. World Time Solutions Limited

3M Cold Shrink QS-III Splice Kit 5467A(S)-WF

PEM1126ENG ENGLISH STPKR. TERMINATION KIT FOR PAPER CABLE WITH LEAD SHEATH 1 kv INSTALLATION INSTRUCTION

Interface Practices Subcommittee SCTE STANDARD SCTE Specification for Mainline Plug (Male) to Cable Interface

The Kent Range of Metering Products T131, T132, T133, T134 pulse units

BT Diverse Repeater. User Guide

Spectra Flood Q40. Exterior Fixture User Manual. Order code: LEDJ Version LEDJ284N - 15 Version

Emerging Subsea Networks

ENGINEERING COMMITTEE

Connectivity accessories by Nestor Cables

ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE Specification for F Connector, Male, Pin Type

Achat 115 Sub A active subwoofer. user manual

MATERIAL SPECIFICATION FOR SIGNAL HEADS

Newsletter

3M Better Buried Compound Compression Closure System

MiniXtend Cable with Binderless* FastAccess Technology Jacket and Buffer Tube Removal Procedures. 1. General. 2. Precautions

Telemetry Receiver Installation Guide


3M Better Buried Closures

Specification for Loose Tube Fiber Optic Cable (Non-Metallic, Dry Block, Figure-8) (G.652.D)

TECHNICAL SPECIFICATION

Dynatel Advanced Cable Locator 2250

LAN Network Tester LAN Network Tester

Field Instruction. Any registered training organisation UETTDRCJ21A Lay ESI electrical cables. Before commencing work:

Dragonfly Quad. User Manual V1.4. Order code: EQLED101

Quick Start Guide. Thank you for choosing YouView from BT

3M Better Buried Closure (with 3M Scotchlok Shield Bond Connector 4462-FN and 3M High Gel Re-enterable Encapsulant 8882)

VITALink Taped Splice Straight Through Crimp

SLiC Fiber Aerial Closure System

Transcription:

Metal Theft Taskforce Identification Booklet

The theft of metal is a growing problem in the UK, directly affecting multiple industry sectors (power, transportation, water and communications). The current cost of metal theft to the UK economy has recently been estimated by ACPO 1 at 770m p.a. This financial impact is dwarfed by the impact on society (inconvenience and potential impact on public health and safety) and commerce. 1 ACPO Association Of Chief Police Officers Conductive Metal Theft Working Group Metal Theft Problem Profile

Attacks on BT copper cable network have isolated entire communities and disrupted emergency service communications. Openreach strictly controls the recovery and processing of its own waste cable and it should not be available on the open market. All cable recovered by BT, or its contractors, is disposed of through Openreach s official channels and should not be offered directly to scrap metal dealers or recyclers. We Mark This document is designed to assist in the identification of Openreach owned cables and associated metal assets. It is only a guide and is by no means exhaustive. If in doubt, the Openreach Metal Theft Taskforce will be able to provide formal identification. We Search Openreach and BT Group are working closely with police forces across the UK, The British Metals Recycling Association, Crimestoppers and SmartWater to combat metal theft. WE Prosecute The BT Metal Theft Taskforce provides dedicated resource and investigates all incidents involving the theft or damage of cable from within our network and operational estate. Contact details BT Security Helpdesk (24 hours) 0800 321 999 Openreach Network Integrity Unit 0791 8082905 Operation EIGER email address eiger@bt.com SmartWater Control Room 0800 0287317 or email controlroom@smartwater.com Crimestoppers 0800 555 111 www.crimestoppers-uk.org 03

The Law Scrap Metal Dealers Act 1964 The Scrap Metal Dealers Act 1964 Civic Goverment (Scotland) Act 1982, allows local authorities to regulate the scrap metal trade within their area. Scrap metal dealers registered with a local authority have a legal obligation to maintain books recording their dealings in relation to: All scrap metal recieved at their premises All scrap metal either processed at, or despatched from, their premises unless holding an exemption under the Civic Government (Scotland) Act 1982. All books must be bound and kept exclusively for this purpose. They must be retained for a period of two years after the final entry. 04

Scrap metal either processed at or despatched from premises In relation to scrap metal either processed at, or despatched from premises, the book must accuratley record: Description and weight Date and description of processing or date of despatch In the case of scrap metal despatched on sale or exchange, full name and address of person to whom sold, or with whom exchanged and the consideration (price, value or other property) for which sold or exchanged In the case of scrap metal processed or despatched other than on sale or exchange, the estimated value immediately before processing or despatch. All entries must be recorded immediatly after the transaction. It is a criminal offence to fail to comply with these requirements Powers of Entry and Inspection Under section 6 (1) of the Act, any constable shall have a right at all reasonable times: (a) To enter and inspect any place for the time being entered in a register under section 1 of this Act as a place which is occupied by a scrap metal dealer as a scrap metal store or as a place which is occupied by a scrap metal dealer wholly or partly for the purposes of his business. (b) To require the production of, and to inspect, any scrap metal kept at place and any book which the dealer is required by this Act to keep at that place, or, as the case may be, any reciept which the dealer is required to keep as mentioned in section 3(1)(b) of this Act, and to take copies of or extracts from such books or reciepts. 05

Stolen Metals Initiatives Openreach cable and assets have been marked with a robust forensic liquid called SmartWater, a forensic coding system which is invisible to the naked eye but fluoresces yellow under ultra-violet (UV) light. 06

SmartWater contains a unique forensic code which links property to its owner, is almost impossible to completely remove and is capable of withstanding burning and bleaching. If attacked SmartWater may fragment onto cutting and processing equipment, providing a link back to a specific crime scene. SmartWater can be applied to any item of value, including all non-ferrous metals and is widely used within BT to protect cable and other assets at risk of theft including within our underground cable network. SmartWater could be anywhere within our network and estate and is also widely used in specialist undercover operations. Police forces throughout the UK are trained to look for SmartWater. Scrap metal dealers and metal recyclers are also working with the police and are scanning metals brought onto their premises with UV equipment. If they find any traces of SmartWater on metals then they will refuse to handle it and, where necessary, will inform the appropriate authorities. Crimestoppers Crimestoppers is an independent charity helping to fight crime. It is not part of the police or government. The charity believes that people and their communities have the right to live without crime and without the fear of crime. Their mission is to provide a means to detect, reduce and prevent crime through the provision of information about crimes to law enforcement from anonymous sources. Crimestoppers operates 0800 555 111 and www.crimestoppers-uk.org for people to pass on information about crimes anonymously. They will not take users names or any personal details and information cannot be traced or recorded. As users remain anonymous, it also means they will not go to court or give a statement to police. 07

08 Telecommunication cable can come in a variety of sizes and core configurations, the following are examples of the most commonly used.

Current Cable Markings Some telecommunication cables used by BT have their own unique marking printed onto the outer sheathing. This is an example of a typical cable marking: HCE manufacturers code for BT Property of BT PLC (only on cables manufactured from May 2008) Cable description 100/0.5 100 pairs of wire each conductor 0.5mm diameter 02994 HCE 11.04.11 PROPERTY of BT PLC property 067628 100/0.5 b3 cables Date of manufacture BT Item code unique number used within BT Manufacture info in this case manufactured by B3 CABLES 09

5 pair 0.5mm SWA Telecom Cable Grease filled steel wire armoured telephone cable 5 pairs 0.5mm conductor Outer sheath colour light grey Layer of galvanised steel wires Inner sheath colour black Diameter 10mm This cable also comes in 10, 20, 50 and 100 pair sizes with various core configurations. 10

300 pair 0.4mm PeUT Telecom cable Air core duct telephone cable Aluminium moisture barrier adhering to the sheath 300 pair 0.4mm conductor Sheath colour black Diameter 23mm This cable also comes in 50 4800 pair sizes with various core configurations. 11

800pr 0.5mm PeUT Telecom cable Air core duct telephone cable Aluminium moisture barrier adhering to the sheath 800 pairs 0.5mm conductor Sheath colour black Diameter 46mm This cable also comes in 50 4800 pair sizes with various core configurations. 12

1600pr 0.4mm PeUT Telecom Cable Air core duct telephone cable Aluminium moisture barrier adhering to the sheath 1600 pairs 0.4mm conductor Sheath colour black Diameter 51.5mm This cable also comes in 50 4800 pair sizes with various core configurations. 13

20 pair 0.5mm PET Telecom Cable Grease filled duct multi-pair telephone cable 20 pairs 0.5mm conductor Sheath colour black Diameter 10mm This cable also comes in 2 100 pair sizes with various core configurations. 14

100 pair 0.5mm PET Telecom Cable Grease filled duct telephone cable 100 pairs 0.5mm conductor Sheath colour black Diameter 24mm This cable also comes in 2 100 pair sizes with various core configurations. 15

50 pair 0.5mm Aerial Cable Grease filled figure 8 aerial cable 50 pairs 0.5mm conductor Steel support strand Sheath colour black Diameter 16mm This cable also comes in 10 100 pair sizes with various core configurations. 16

100 pair 0.6mm Aerial Cable Grease filled aerial cable 100 pairs 0.6mm conductor Steel support strand Sheath colour black Diameter 30mm This cable also comes in 10 100 pair sizes with various core configurations. 17

40 pair 0.6 TVS (PCM) Cable Grease filled duct telecom cable 40 pairs 0.6mm conductor Transverse screen this is a second foil barrier separating the inner core Diameter 20mm This cable also comes in 20, 40 and 80 pair sizes all with 0.6mm conductors. 18

Drop Wire Number 10 2 pairs 0.5mm conductors Aerial telecom cable X3 steel support strand Sheath colour black Diameter 5mm This cable also comes in 1, 2 and 4 pair sizes with various core configurations. 19

Legacy cable Lead-Sheathed Lead-sheathed cable was installed in the ground up until the late 1960s, but is still very common. It comprises of an outer layer of lead sometimes wrapped in hessian and bitumen for protection, with a paper-wrapped copper core. Lead cables come in a variety of sizes, from 1cm to nearly 10cm diameter. The inner core can also differ in its appearance many trunk cables will have a number of thick coaxial tubes at the centre. 20

Polythene-Sheathed Cable After lead-sheathed cable was discontinued, BT introduced a polythene-sheathed cable. The outer core is made up of a translucent or white coloured polythene sheath, with an aluminium barrier between it and the core. The core is still paper-wrapped copper and is identical to that used in the previous lead cables. Again it comes in a variety of sizes and core configuration. The pairs are insulated with either plastic or paper sheathing. Coaxial cable was used to carry high grade circuits prior to fibre optics. This type of cable consists of copper coaxial tubes wrapped in a steel ribbon. Again, it comes in a variety of sizes and core configurations. These are examples of manufacturers ID labels found on legacy cable. ID labels are located between the sheathing and copper conductors. 21

Internal Cable (Jumper wire) This twin core cable is stored on small hand-held drums and used internally within telephone exchanges. Due to its size it does not have any marking along its length but is unique to BT. It is disposed of by BT within white marked plastic sacks. 22

Fibre Optical Cable The examples here are of fibre optical cables and tubing. This type of cable consists of plastic tubing which protects the glass conductors. This cable does not contain any metal but is used extensively within the telecommunications network. 23

BT Cable Drum Labels The following are typical labels which would be affixed to a cable drum owned by BT. Cable trailers Larger cable drums are transported by cable trailers. The following are examples of the type of trailers used by BT. 24

Cable Winch Cable winches are used by Openreach and its contractors to install and remove cable from within the underground network. The following photographs are examples of the different types used by BT and contractors. 25

It is common practice for thieves to process the cable before selling it on by removing its outer sheathing. This is generally achieved by stripping the outer sheathing and burning the conductors to remove the insulation. The following photos are examples of the results of this practice. Stolen cable can also be found cut into 1 to 2 metre length sticks. 26

For more information Please visit www.openreach.co.uk/cableprotection

www.openreach.co.uk The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc s respective standard conditions of contract. Nothing in this publication forms any part of any contract. BT, Openreach, the BT logo and the Openreach identity are trademarks of British Telecommunications plc. British Telecommunications plc 2011. Registered office: 81 Newgate Street, London EC1A 7AJ Registered in England No: 1800000 Produced by Openreach Designed by Westhill.co.uk Printed in England PHME 62436