More Precision capancdt // Capacitive displacement sensors and systems
18 Compact capacitive single channel measurement system capancdt 61 - Compact and robust construction - High temperature stability - Nanometre repeatability - Suitable for all conductive materials - 24V (9 36V) standard power supply for industrial applications - Ideal for OEM applications - Suitable for practically all sensors System construction The capancdt 61 single channel capacitive electronics is an extremely compact and low cost controller, compatible with all Micro Epsilon capacitive sensor ranges. Designed to be robust and simple to use, it is ideally suited to integration into OEM applications and simple single channel end user requirements. With all items available from stock, the user can quickly select the most suitable sensor range and cable length to be used with the capancdt 61 electronics. For higher volume applications, the capancdt 61 can be used as a base specification for modification to user specific requirements. The flexible 9-36V DC power supply, enables the capancdt 61 series to also be used in mobile applications. Measurement output values are selectable 0-V or +/-5V DC and high temperature stability and resolutions are achieved. A measuring system consists of: Capacitive displacement sensor Sensor cable Controller Supply and signal output cable Accessory: Power supply Oscillator 9...36V Voltage conditioning f OSC 31kHz 5-pin connector Signal Demodulator Preamplifier Sensor cable Sensor
12 19 Controller type DT61 DT61/ECL2 Resolution static 0.01 % FSO 0.01 % FSO Resolution dynamic 0.015 % FSO (1kHz) 0.015 % FSO (1kHz) Bandwidth 1 khz (-3dB) 1 khz (-3dB) Linearity ±0.2% FSO ±0.2% FSO Max. sensitivity deviation ±0.1% FSO ±0.1% FSO Long term stability <0.05% FSO/month <0.05% FSO/month Synchronous operation no no Insulator measurement no no Temperature stability 200ppm 200ppm Temperature range (operation) + +60 C + +60 C Temperatur range (storage) - +75 C - +75 C Supply 24VDC/55mA (9... 36V) 24VDC/55mA (9... 36V) Output 0 V (short-circuit-proof), optional: ±5V, 0V 0 V (short-circuit-proof), optional: ±5V, 0V Sensors suitable for all sensors suitable for all sensors Sensor cable 1m 2m FSO = Full Scale Output 5.5 Mounting holes for M4 screws 12 76 26.5 24 16.5 6 Ø 9.1 53 5.5 8.3
20 Accessories capancdt Sensor cable Sensor and pre-amplifier electronics are connected using a special, double-shielded sensor cable. Cable lengths of 2m, 3m or 4m are optionally available but require special tuning of the pre-amplifier. Connector type C: cable for sensors CS005 / CS02 / CS05 / CS08 Cable length 2x straight connectors 1x straight / 1x 90 connector Standard 1m CC1,0C CC1,0C/90 2m CC2,0C CC2,0C/90 3m CC3,0C CC3,0C/90 Sensor cable CCx,xC Sensor cable CCx,xC/90 Standard length 1m (optional 2m/3m) Ø9.5 8.6 13.7 17.5 Connector type B: cable for sensors CS1 / CS1HP / CS2 / CS3 / CS5 / CS Cable length 2x straight connectors 1x straight / 1x 90 connector Standard 1m CC1,0B CC1,0B/90 2m CC2,0B CC2,0B/90 3m CC3,0B CC3,0B/90 Sensor cable CCx,xB Sensor cable CCx,xB/90 Standard length 1m (optional 2m/3m) Ø9.5 Ø9.5 Ø6 Ø5.4 Ø4 27 37 Ø3.2 8 13.1 16.9 16 Ø5.4 Ø6 27 37 Ø3.2 27 37 20.5 30.5 Ø Accessories capancdt 61 6200 6500 MC2.5 Micrometer for sensor calibration, range 0-2.5mm, Resolution 0.1µm. Suitable for sensors CS005 to CS2 MCD Digital micrometer for sensor calibration, range 0 - mm, adjustable offset (zero). Suitable for all sensors. SWH.0S.650.CTMSV Vacuum feed through UHV Vacuum feed through PC6200-3/4 Power-/trigger cable, 4 pin, 3m SCAC3/4 Signal output cable, (necessary for multi channel applications), 4 pin, 3m SCAC3/5 Signal output cable, analog, 5 pin, 3m SC6000-1,0 Synchronization cable, 5 pin, 1m CA5 Preamplifier cable 5 pin, 5m PS2020 Power supply for DIN rail mounting; Input 230VAC (115VAC); Output 24VDC / 2.5 A; L/W/H 120x120x40mm
21 WS12 Ø8.8 SWH Vacuum feed through (Art.-no. 0323050) 34 2 SWH Vacuum Mx0.75 feed through (Art.-no. 0323050) 34 Mx0.75 2 Ø14 9 UHV/B Vacuum feed triax weldable (Art.-no. 0323346) UHV/B Vacuum feed triax weldable (Art.-no. 0323346) WS12 Ø8.8 max. 17 Ø14 9 ø13.50h6 WS11 Max. leak rate 1xe max. -7 17 mbar l s -1, compatible with connector type B UHV/B Max. leak rate Vacuum 1xe -7 feed mbar triax l s -1, compatible with flange with connector CF16 (Art.-no. type B 0323349) UHV/B Vacuum 13.5 feed triax with flange CF16 (Art.-no. 0323349) 6 13.5 Weld seam 6 ø34 (flange ø34 standard (flange standard CF16) CF16) Weld seam Max. leak rate 1xe -9 mbar l s -1, compatible with connector type B Max. leak rate 1xe -9 mbar l s -1, compatible with connector type B ø13.50h6 WS11 UHV/B Vacuum Max. leak rate feed 1xe triax -9 mbar screwable l s -1, compatible (Art.-no. with connector 0323370) type B UHV/B Vacuum feed triax screwable (Art.-no. 0323370) ø13.50h6 WS11 ø13.50h6 Max. leak rate 1xe -9 mbar l s -1, compatible with WS11 connector type B Max. leak rate 1xe -9 mbar l s -1, compatible with connector type B Max. leak rate 1xe -9 mbar l s -1, compatible with connector type B SCA3/4 Signal output cable (Art.-no. 29024) SCA3/4 Signal output cable (Art.-no. 29024) SCA3/5 Signal output cable (Art.-no. 2902112) 50 SCA3/5 Signal output cable (Art.-no. 2902112) 150 SCA3/4 Signal output cable (Art.-no. 29024) PC6200-3/4 Power-/trigger cable (Art.-no. 2901881) PC6200-3/4 Power-/trigger cable (Art.-no. 2901881) 50 SCA3/5 Signal output cable (Art.-no. 2902112) 150 50 150 0 Ø11.5 Ø11.5 Ø11.5 Ø9 Ø9 Ø9 PC6200-3/4 Power-/trigger cable (Art.-no. 2901881) 11 43.5 Ø5.5 ±0.3 0 11 43.5 SC6000-1,0 Synchronization cable (Art.-no. 2903473) CA5 Preamplifier cable (Art.-no. 2903180) Ø5.5 ±0.3 0 11 SC6000-1,0 Synchronization 43.5 cable (Art.-no. 2903473) CA5 Preamplifier cable (Art.-no. 2903180) Ø4.9 ±0. SC6000-1,0 Synchronization cable (Art.-no. 2903473) CA5 Preamplifier cable (Art.-no. 2903180) Ø4.9 ±0. Ø5.5 ±0.3 Ø4.9 ±0.
High performance sensors made by Micro-Epsilon Sensors and systems for displacement and position Sensors and measurement devices for non-contact temperature measurement 2D/3D profile sensors (laser scanner) Optical micrometers, fibre optic sensors and fibre optics Colour recognition sensors, LED analyzers and colour online spectrometer Measurement and inspection systems Modifications reserved / Y9761319-E0364GKE MICRO-EPSILON Headquarters Koenigbacher Str. 15 94496 Ortenburg / Germany Tel. +49 (0) 8542 / 168-0 Fax +49 (0) 8542 / 168-90 info@micro-epsilon.com www.micro-epsilon.com Micro-Epsilon UK Ltd. No.1 Shorelines Building Shore Road Birkenhead CH41 1AU Phone +44 (0) 151 355 6070 Fax +44 (0) 151 355 6075 info@micro-epsilon.co.uk www.micro-epsilon.co.uk