TDA2320 PREAMPLIFIER FOR INFRARED REMOTE CONTROL SYSTEMS

Similar documents
300MHz Single Supply Video Amplifier with Low In/Out Rail -IN -IN +IN +IN -VCC. Part Number Temperature Range Package Packaging Marking TSH341ILT

TSH MHz Single Supply Video Buffer with Low In/Out Rail. Pin Connections (top view) Description. Applications. Order Codes

EMIF QCF 4 LINE LOW CAPACITANCE EMI FILTER AND ESD PROTECTION IPAD

HCF4054B 4 SEGMENT LIQUID CRYSTAL DISPLAY DRIVER WITH STROBED LATCH FUNCTION

Obsolete Product(s) - Obsolete Product(s)

HCF4027B DUAL J-K MASTER SLAVE FLIP-FLOP

STEVAL-ISA001V1. 6W Dual Output Supply using VIPer12A. Features. Blue angel. Applications

HCF40193B PRESETTABLE UP/DOWN COUNTERS (DUAL CLOCK WITH RESET) BINARY TYPE

BUL128 HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

BUL1203EFP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR

HD1530FX. High Voltage NPN Power Transistor for High Definition and New Super-Slim CRT Display. Features. Applications. Internal Schematic Diagram

Obsolete Product(s) - Obsolete Product(s)

Symbol Parameter Value Unit V CES Collector-Emitter Voltage (V BE = 0) 700 V V CEO Collector-Emitter Voltage (I B = 0) 400 V Emitter-Base Voltage

Order code Package Connection. SPDC400FC12M0.60 Open frame Comb. October 2007 Rev 1 1/9

ROBOT-M24LR16E-A. Evaluation board for the M24LR16E-R dual interface EEPROM. Features. Description

TA0311 TECHNICAL ARTICLE High Temperature Electronics 1 Introduction 2 Why the need for high-temperature semiconductors?

STEVAL-TDR007V1. 3 stage RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E. Features. Description

Obsolete Product(s) - Obsolete Product(s)

TEA6425 VIDEO CELLULAR MATRIX

DESCRIPTION High voltage Schottky rectifier suited for SLIC protection during the card insertion operation. SOT-23 (Plastic)

Obsolete Product(s) - Obsolete Product(s)

STEVAL-CCA043V1. 25 Watt mono BTL class-d audio amplifier demonstration board based on the TDA7491MV. Features. Description

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ILL043V1. High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings. Features.

EMIF02-SPK01F2 2 LINE EMI FILTER AND ESD PROTECTION Low-pass Filter Input Output Ri/o = 10 Ω Cline = 200 pf GND GND GND

AN555 APPLICATION NOTE AUTOMOTIVE PROTECTION WITH THE RBOxx SERIES

DB W. 60W / 26V / MHz PA using 1x PD57070S The LdmoST FAMILY. General Features. Description. Order Code

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s)

STW High voltage fast-switching NPN power transistor. Features. Application. Description

Obsolete Product(s) - Obsolete Product(s)

STEVAL-IHM043V1. 6-step BLDC sensorless driver board based on the STM32F051 and L6234. Features. Description

L4909 EXTERNALLY ADJUSTABLE MULTIFUNCTION REGULATOR

STEVAL-ILL015V1. High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32. Features. Description

STEVAL-ILH005V W electronic ballast for HID lamps based on the L6562A and ST7LITE39F2. Features. Description

STEVAL-ILL029V1. Front panel demonstration board based on the STLED325 and STM8S. Features. Description

GM60028H. DisplayPort transmitter. Features. Applications

STEVAL-IKR001V7D. Sub Ghz transceiver daughterboard with power amplifier based on the SPIRIT1. Features. Description

AN3075 Application note

L CHANNEL LOW POWER PREAMPLIFIER

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ILH004V1. 70 W electronic ballast for metal halide lamp (HID) based on the L6382D5 and ST7FLITE49K2. Features. Description

Mechanical specification. October 2010 Doc ID Rev 1 1/10

STEVAL-ICB004V1. Advanced resistive touchscreen controller demonstration board based on the STMPE811. Features. Description

March 2012 Doc ID Rev 1 1/4

EMIF02-USB05F2 IPAD. 2 line EMF filter including ESD protection. Main application. Description. Pin configuration (bump side) Benefits

BAL-NRF01D3. 50 ohm balun transformer for 2G45 ISM matched Nordic s chipset: nrf24le1 QFN32, nrf24ap2-1ch and nrf24ap2-8ch. Features.

STEVAL-IHM025V1. 1 kw 3-phase motor control demonstration board featuring the IGBT SLLIMM STGIPL14K60. Features. Description

Obsolete Product(s) - Obsolete Product(s)

STEVAL-ILL037V1. Demonstration board for the HVLED805 IC for LED power supply. Features. Description

STEVAL-CCH002V2. HDMI and video switches demonstration board. Features. Description

UM0534 User manual. STEVAL-MKI014V1 demonstration kit for the LIS344ALH. Introduction

2 x 58 W high frequency ballast for T8 fluorescent tubes based on L6562A, L6569, and STL11NM60N in PowerFlat HV package

GM68020H. DisplayPort receiver. Features. Applications

STV6110A. 8PSK/QPSK low-power 3.3 V satellite tuner IC. Description. Features

Obsolete Product(s) - Obsolete Product(s)

GM69010H DisplayPort, HDMI, and component input receiver Features Applications

STEVAL-IHM021V W, 3-phase inverter based on the L6390 and UltraFASTmesh MOSFET for speed FOC of 3-phase PMSM motor drives. Features.

EMIF C2 IPAD. 6 line EMI filter and ESD protection. Main product characteristics. Description. Order Code. Benefits

STEVAL-IHM024V W 3-phase inverter using the L6390 and STGDL6NC60DI for vector control. Features. Applications. Description

STEVAL-ISB008V1. Standalone USB Li-Ion battery charger demonstration board based on the STw4102 and STM32F103C6. Features.

Order code Package Packing

STEVAL-SPBT2ATV2. USB Dongle for the Bluetooth class 2 SPBT2532C2.AT module. Features. Description

STEVAL-MKI126V2. MEMS microphone system evaluation board based on the STA321MPL and MP34DB01. Description. Features

STEVAL-TDR020V1. Portable UHF 2-way radio demonstration board based on the PD84006L-E. Features. Description

AN442 APPLICATION NOTE

EVALPM8803-FWD. EVALPM8803-FWD: IEEE802.3at compliant demonstration kit with synchronous active clamp forward PoE converter. Features.

EVAL-RHF1009A. EVAL-RHF1009A product evaluation board. Description. Features

BYT230PIV-1000 BYT231PIV-1000

STANC0. Stereo HD-PA digitally programmable active noise cancelling audio engine. Features. System. Input and output.

Obsolete Product(s) - Obsolete Product(s)

STEVAL-TDR021V1. Demonstration board using the PD84008L-E for 900 MHz 2-way radio. Features. Description

STTH8003CY HIGH FREQUENCY SECONDARY RECTIFIERS MAJOR PRODUCTS CHARACTERISTICS. 2x40 A 300 V. V F (max) FEATURES AND BENEFITS

STEVAL-MKI126V3. STSmartVoice demonstration board based on MP34DT01. Description. Features

STEVAL-CCM003V1. Graphic panel with ZigBee features based on the STM32 and SPZBE260 module. Features. Description

STA2051E VESPUCCI 32-BIT SINGLE CHIP BASEBAND CONTROLLER FOR GPS AND TELEMATIC APPLICATIONS 1 FEATURES. Figure 1. Packages

IEC compliant smart meter system for AMI applications based on STM32, ST7570 PLM, and STPMC1/STPMS1 chipset

STEVAL-IME002V1. Multi-lead electrocardiogram (ECG) and body impedance demonstration board. Features. Description

IMPORTANT NOTICE. Company name - STMicroelectronics NV is replaced with ST-NXP Wireless.

Main components Narrow-band OFDM power line networking PRIME compliant system-on-chip

USBLC6-2SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

L7208. Portable consumer electronics spindle and VCM motor controller. General features. Spindle driver. Description. VCM driver.

MEMS Module STMEMSDQ-EVAL1

Description. Table 1. Device summary. Order codes Temperature range [ C] Package Packing. LPS2HBTR -30 to +105 HLGA - 10L

Obsolete Product(s) - Obsolete Product(s) STV6432 Audio/Video Output Buffers for STB and DVD Devices FEATURES DESCRIPTION

Very low-noise, high-efficiency DC-DC conversion circuit

STEVAL-ISA121V1. Wide range single-output demonstration board based on the VIPER37LE. Features. Description

STEVAL-IFN003V1. PMSM FOC motor driver based on the L6230 and STM32F103. Features. Description

USBLC6-4SC6Y. Automotive very low capacitance ESD protection. Features. Applications. Description. Benefits. Complies with the following standards

8-BIT MCU WITH SINGLE VOLTAGE FLASH MEMORY, DATA EEPROM, ADC, TIMERS, SPI

STEVAL-IHT005V2. Demonstration board with full 3.3 V ACS/Triac control using the STM32F100. Description. Features

STEVAL-IHM008V1. BLDC & AC motor control Power board SEMITOP 2 1kW. Features. Applications

STEVAL-ISA050V1. Monolithic VR for chipset and DDR2/3 demonstration board based on the PM6641. Features. Application. Description

Obsolete Product(s) - Obsolete Product(s)

STTH302 HIGH EFFICIENCY ULTRAFAST DIODE MAIN PRODUCT CHARACTERISTICS I F(AV) 3A 200 V Tj (max) 175 C

TN0885 Technical note

STDP2650 Advanced DisplayPort to HDMI converter Features Applications

STEVAL-IHM038V1. BLDC ceiling fan controller based on the STM32 and SLLIMM-nano. Description. Features

AN2421 Application note

Transcription:

WIDE SUPPLY VOLTAGE RAGE: 4 TO 20V SIGLE OR SPLIT SUPPLY OPERATIO VERY LOW CURRET COSUMPTIO: 0.8mA VERY LOW DISTORTIO: 0.03% TYPICA DESCRIPTIO The TDA2320 is a monolithic integrated circuit in Dip package especially designed to amplify the IR signal in remote controlled TV or radio sets. It directly interfaces the digital control circuitry. The TDA2320 incorporates a two-stage amplifier with excellent sensitivity and high noise immunity. It can work with a single 5V supply voltage and flash or carrier transmission modes as provided for example by the M709A/M710A/MOS transmitters. The TDA2320 is particularly intended to be used in conjunction with the M104 and M206 + M3870 remote control receivers. DIP8 (Plastic Package) PI COECTIOS (top view) O T FO R EW DESIG D SO8 (Plastic Micropackage) TDA2320 PREAMPLIFIER FOR IFRARED REMOTE COTROL SYSTEMS OT FOR EW DESIG ORDER CODE Part umber Temperature Range Package D TDA2320-40 C, +105 C Example : TDA2320 = Dual in Line Package (DIP March 2005 1/8

SCHEMATIC DIAGRAM (1/2 TDA2320) R16 4kΩ Q25 Q6 Q5 R15 150kΩ Q7 Q4 R1 2kΩ R3 60kΩ Q11 R2 2kΩ Q3 Q8 Q2 Q31 Q9 R5 4kΩ Q32 Q10 R4 1.2kΩ Q12 R6 4kΩ Inverting Input C1 43pF Q13 Q15 Q18 ABSOLUTE MAXIMUM RATIGS Symbol Parameter Value Unit V CC Supply Voltage 20 V p tot Total Power Dissipation at T amb = 70 C 1) 400 mw T stg,t j Storage and Junction Temperature -40 to 150 C 1. Power dissipation must be considered to ensure maximum junction temperature (Tj) is not exceeded. O T FO R EW DESIG R7 15kΩ Q17 R8 150kΩ R11 1kΩ Q36 on-inverting Input Q19 C2 23pF R9 15kΩ Q20 Q21 Q14 Q22 R10 45kΩ Q23 R12 812Ω R18 2kΩ Q37 Q33 Q35 Q38 Q27 Q28 Q34 R17 4kΩ Q29 Q30 R13 27Ω R14 27Ω V CC Output V CC 2/8

ELECTRICAL CHARACTERISTICS V CC = 5V, T amb = 25 C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit V CC Supply Voltage 4 20 V Supply Current I CC V CC = 20V ma 0.8 2 I ib Input Bias Current 100 500 na Input Offset Voltage V io mv R s 10kΩ 0.5 I io Input Offset Current 15 na A vd Large Signal Voltage Gain f = 1kHz f = 100kHz 64 70 30 V opp DC Output Voltage Swing 2.5 V GBP Gain-bandwidth Product f = 200kHz 1.5 3 MHz SR Slew Rate R L = 2kΩ 1.5 V/µs e n PSRR Equivalent Input oise Voltage f = 40kHz Rs = 10kΩ 20 Power Supply Rejection Ratio f = 100Hz 80 O T FO R EW DESIG db nv ----------- Hz db 3/8

O T F O R E W D E S IG TDA2320 4/8

O T F O R E W D E S IG TDA2320 5/8

Figure 12 : Filter Configuration Figure 13 : 5th Order Low-pass Filter (Butterworth) with Unity Gain configuration Ri Figure 14 : 5th Order High-pass Filter (Butterworth) with Unity Gain configuration Ci Ci Ri Vin R1 C1 R1 R2 C2 C1 R1 R2 R2 C1 O T FO R EW DESIG C2 R3 C3 R4 C4 R3 C3 R4 Vout 6/8

PACKAGE MECHAICAL DATA DIM. Plastic DIP-8 MECHAICAL DATA mm. O T FO R EW DESIG inch MI. TYP MAX. MI. TYP. MAX. A 3.3 0.130 a1 0.7 0.028 B 1.39 1.65 0.055 0.065 B1 0.91 1.04 0.036 0.041 b 0.5 0.020 b1 0.38 0.5 0.015 0.020 D 9.8 0.386 E 8.8 0.346 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 7.1 0.280 I 4.8 0.189 L 3.3 0.130 Z 0.44 1.6 0.017 0.063 P001F 7/8

PACKAGE MECHAICAL DATA DIM. mm. O T FO R EW DESIG inch MI. TYP MAX. MI. TYP. MAX. A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.04 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 4.80 5.00 0.189 0.197 E 3.80 4.00 0.150 0.157 e 1.27 0.050 H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 k SO-8 MECHAICAL DATA 8 (max.) ddd 0.1 0.04 0016023/C Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. o license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. 8/8 The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com