EdiPower II Series EdiPower II CAC Series Datasheet Features : LED light engine High power operation Instant on Long lifetime Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1
Table of Contents General Information...3 Absolute Maximum Ratings (T J =25 o C)...4 Characteristics...4 Luminous Flux Characteristic...5 Chromaticity coordinates(t j =85 o C)...6 Mechanical Dimensions...7 Characteristic curve...9 Reliability...16 Product Packaging Information...17 Revision History...19 About Edison Opto...19 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2
General Information Introduction EdiPower II CAC series can provide different operating powers. They serve as optical engine and can be utilized in general lighting and special lighting applications, such as MR16 and GU10. Furthermore, the high CRI options allow the customers to optimize the effect in various fields such as interior architecture. Ordering Code Format 2 P CA xx xw xx P2x xxx X1 X2 X3 X4 X5 X6 X7 X8 X1 X2 X3 X4 X5 Type Component Series Wattage Color 2 Emitter P EdiPower CA CA Series 04 4W CW Cool White 07 7W NW Neutral White WW Warm White X6 X7 X8 Internal code PCB Board Serial Number - - P21 13x13 - - P22 16x16 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3
Absolute Maximum Ratings (T J =25 o C) Parameter Symbol Value Units DC Forward Current 1 2PCA04xW27P2100x : 100 I F 2PCA07xW27P2200x : 200 2PCA04xW27P2100x : 150 Max Forward Current I F 2PCA07xW27P2200x : 375 Reverse Voltage 2 V R Note 2 V LED junction Temperature 3 T J 150 C Operating Temperature - -40 ~ +110 C Storage Temperature - -40 ~ +120 C ESD Sensitivity (HBM) V B 2,000 V Isolation Voltage - 1,000 V Thermal Measurement Point (T P ) - <85 C Notes: 1. DC forward current should not exceed LED s operating current; the current tolerance should be kept within a range of 5%. 2. LEDs are not designed to be driven in reverse bias. 3. Proper current derating must be observed to maintain junction temperature below the maximum at all time. ma ma Characteristics Parameter Symbol Value Units Viewing Angle 2Θ 1/2 105~120 Degree Forward voltage V F 36~38.4 V CCT - CW : 5,000-10,000 NW : 3,800-5,000 WW : 2,670-3,800 2PCA04xW27P2100x : 20 Thermal resistance (Typ.) Rθ J-B 2PCA07xW27P2200x : 15 V F / T (Typ.) - 2PCA04xW27P2100x : -12 to -20 2PCA07xW27P2200x : -10 to -18 CRI (Min.) - 80 - Notes: 1. 2θ 1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity. 2. CCT is measured with an accuracy of ± 5%. 3. Color rendering index CRI Tolerance : ± 2. K o C/W mv/ C Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4
Luminous Flux Characteristic Luminous Flux Characteristics T J =25 C Wattage (W) Color 2700K Typ. Luminous Flux(lm) T J =85 C Typ. Luminous Flux(lm) T J =25 C Typ. Forward Voltage V F (V) Forward Current (ma) 360 405 36.8 100 510 570 38.8 150 Order Code 3000K 370 415 36.8 100 520 585 38.8 150 2PCA04WW27P21001 3500K 390 435 36.8 100 545 610 38.8 150 3-8W 4000K 390 435 36.8 100 545 610 38.8 150 2PCA04NW27P21001 5000K 405 455 36.8 100 560 625 38.8 150 5700K 400 450 36.8 100 565 635 38.8 150 2PCA04CW27P21001 6500K 395 440 36.8 100 555 620 38.8 150 2700K 725 815 36.2 200 1200 1345 39.6 375 3000K 755 845 36.2 200 1245 1395 39.6 375 2PCA07WW27P22001 3500K 765 860 36.2 200 1265 1420 39.6 375 7-15W 4000K 815 915 36.2 200 1365 1530 39.6 375 2PCA07NW27P22001 5000K 830 930 36.2 200 1390 1560 39.6 375 5700K 825 925 36.2 200 1380 1550 39.6 375 2PCA07CW27P22001 6500K 820 920 36.2 200 1385 1555 39.6 375 Notes: 1. Forward Voltage has ±3.6V tolerance. 2. The emphasised value with bold font showed at forward current means the DC forward current value. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5
Chromaticity coordinates(t j =85 o C) Color region stay within Macadam "3-Step/5-step" ellipse from the chromaticity center. The chromaticity center refers to ANSI C78.377:2008. Please refer to ANSI C78.377 for the chromaticity center. 0.45 0.44 0.43 0.42 27R 0.41 30R 273 0.40 35R 303 27L 0.39 40R 353 30L 0.38 403 35L CIE-y 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 40L 50R 503 57R 50L 573 65R 57L 653 65L 5-Step 3-Step Cool White Neutral White Warm White Planckian locus 0.29 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CIE-x CCT Steps Cx Cy a b theta 2700K 5 0.4578 0.4101 0.01350 0.00700 53.70 3000K 5 0.4338 0.4030 0.01390 0.00680 53.22 3500K 5 0.4073 0.3917 0.01545 0.00690 54.00 4000K 5 0.3818 0.3797 0.01565 0.00670 53.72 5000K 5 0.3447 0.3553 0.01370 0.00590 59.62 5700K 5 0.3287 0.3417 0.01243 0.00533 59.09 6500K 5 0.3123 0.3282 0.01115 0.00475 58.57 CCT Steps Cx Cy a b theta 2700K 3 0.4578 0.4101 0.00810 0.00420 53.70 3000K 3 0.4338 0.4030 0.00834 0.00408 53.22 3500K 3 0.4073 0.3917 0.00927 0.00414 54.00 4000K 3 0.3818 0.3797 0.00939 0.00402 53.72 5000K 3 0.3447 0.3553 0.00822 0.00354 59.62 5700K 3 0.3287 0.3417 0.00746 0.00320 59.09 6500K 3 0.3123 0.3282 0.00669 0.00285 58.57 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6
Mechanical Dimensions 2PCA04xW27Pxx001 Emitter Dimensions 1,22 2,86 TP 13,35 1,22 4,85 2,60 13,35 2,60 0,80 1,00 Notes : 1. Unit : mm 2. Tolerance : ± 0.2 mm 3. Drawings are not to scale 4. T P : Thermal measurement point 2PCA04xW27Pxx001 Emitter Circuit Layout Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7
2PCA07xW27Pxx001 Emitter Dimensions 1,30 1,30 3,30 TP 15,85 5,50 2,60 15,85 2,60 0,80 1,00 Notes : 1. Unit : mm 2. Tolerance : ± 0.2 mm 3. Drawings are not to scale 4. T P : Thermal measurement point 2PCA07xW27Pxx001 Emitter Circuit Layout Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8
Characteristic curve Color Spectrum 1.2 Normalized luminous Intensity 1.0 0.8 0.6 0.4 0.2 Wavelength(nm) Color Spectrum at a typical CCT for EdiPower II CAC series 2PCAxxWW27Pxx001 2PCAxxNW27Pxx001 2PCAxxWW27Pxx001 0 380 460 540 620 700 780 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9
Forward Current vs. Forward Voltage 600 500 2PCA04xW27Pxx001 2PCA07xW27Pxx001 Forward Current (ma) 400 300 200 100 0 34 36 38 40 42 44 Forward Voltage (V) Forward Current vs. Forward Voltage for EdiPower II CAC series Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 10
Relative Intensity vs. Forward Current (4W) 1200 Relative Lumnious Intensity 1000 800 600 400 200 2PCA04CW27P21001 2PCA04NW27P21001 2PCA04WW27P21001 0 0 50 100 150 200 250 300 Forward Current (ma) Forward Current vs. Luminous Intensity for EdiPower II CAC 4W series Relative Intensity vs. Forward Current (7W) 2150 1850 2PCA07CW27P22001 Relative Lumnious Intensity 1550 1250 950 650 2PCA07NW27P22001 2PCA07WW27P22001 350 0 100 200 300 400 500 600 Forward Current (ma) Forward Current vs. Luminous Intensity for EdiPower II CAC 7W series Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11
Luminous Flux vs. Junction Temperature 120 Normalized Luminous Intensity (%) 100 80 60 40 20 0 0 20 40 60 80 100 120 140 Junction Temperature ( o C) Luminous flux vs. junction temperature for EdiPower II CAC series Forward Voltage vs. Junction Temperature 40 35 Forward Voltage (V F ) 30 25 20 15 10 0 20 40 60 80 100 120 140 Junction Temperature ( o C) Forward voltage vs. junction temperature for EdiPower II CAC series Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 12
The trend of Δx,Δy vs. Forward Current characteristic curve 2PCA07xW27Pxx001 resembles curve 2PCA04xW27Pxx001. Δx,Δy vs. Forward Current 0.012 0.008 Δx Δy 0.004 Δx,Δy 0.000-0.004-0.008-0.012 30 60 90 120 150 180 210 240 270 Forward Current (ma) Δx,Δy vs. Forward Current for 2PCA04CW27Pxx001 0.012 0.008 Δx Δy 0.004 Δx,Δy 0.000-0.004-0.008-0.012 30 60 90 120 150 180 210 240 270 Forward Current (ma) Δx,Δy vs. Forward Current for 2PCA04NW27Pxx001 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 13
0.012 0.008 0.004 Δx Δy Δx,Δy 0.000-0.004-0.008-0.012 0 30 60 90 120 150 180 210 240 270 Forward Current (ma) Δx,Δy vs. Forward Current for 2PCA04WW27Pxx001 Δx,Δy vs. Junction Temperature 0.015 0.010 Δx Δy 0.005 Δx,Δy 0.000-0.005-0.010-0.015 0 20 40 60 80 100 120 140 Junction temperature ( o C) Δx,Δy vs. Junction temperature for 2PCAxxCW27Pxx001 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 14
0.015 0.010 Δx Δy 0.005 Δx,Δy 0.000-0.005-0.010-0.015 0 20 40 60 80 100 120 Junction temperature ( o C) Δx,Δy vs. Junction temperature for 2PCAxxNW27Pxx001 0.015 0.010 0.005 Δx Δy Δx,Δy 0.000-0.005-0.010-0.015 0 20 40 60 80 100 120 140 Junction temperature ( o C) Δx,Δy vs. Junction temperature for 2PCAxxWW27Pxx001 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 15
Reliability NO. Test Item Test Condition Remark 1 Temperature Cycle 2 Thermal Shock 3 Moisture Resistance -40 C~100 C 30, 30, mins -40 C~100 C 15, 15 mins 10 sec 25 C~65 C 90% RH 24 hrs / 1 cycle 100 Cycle 100 Cycle 10 Cycle 4 High-Temperature Storage T A =100 C 1,000 hrs 5 Humidity Heat Storage T A =85 C RH=85% 1,000 hrs 6 Low-Temperature Storage T A =-40 C 1,000 hrs 7 Operation Life test 25 C 6,000 hrs 8 High Temperature Operation Life test 85 C 1,000 hrs 9 High Humidity Heat Life Test 85 o C, 85%RH 1,000 hrs 10 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times Failure Criteria Item Criteria for Judgment Min. Max. Lumen Maintenance 85% - Δu'v' - 0.006 Forward Voltage - Initial Data x 1.1 Reverse Current - 10 μa Resistance to Soldering Heat No dead lamps or visual damage Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 16
Product Packaging Information 2PCA04xW27Pxx001 10.3 10.8 CA1313 CA1313 15.8 15.8 14.4 187.0 14.4 187.0 127.0 Tray package dimension. 127.0 1. 2. Label Tray package Antistatic bag 3. 4. Label Label Packaging items for CAC Series Box Notes: 1. All dimensions are in mm. 2. 4W: 24pcs emitters in a full tray. 3. There are 5 trays in a bag. 4. There are 10 bags in a box. 5. There are 10 boxes in a carton. 6. A bag contains one humidity indicator card and drying agent. Carton Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 17
2PCA07xW27Pxx001 10.28 10.78 CA1616 18.28 18.28 CA1616 16.89 186.96 186.96 16.89 126.98 126.96 Tray package dimension. 1. 2. Label Tray package Antistatic bag 3. 4. Label Label Packaging items for CAC Series Box Notes: 1. All dimensions are in mm. 2. 7W: 24pcs emitters in a full tray. 3. There are 5 trays in a bag. 4. There are 10 bags in a box. 5. There are 10 boxes in a carton. 6. A bag contains one humidity indicator card and drying agent. Carton Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 18
Revision History Versions Description Release Date 1 Establish order code information 2014/04/16 2 1. Update Reliability 2. Revise Chromaticity coordinates 2014/09/04 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 19