All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-5B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these products easily support Gigabit Ethernet (1BASE-T/1BASE-TX), which is the next generation of high-speed applications. 2. A Product Lineup Focused on Building of a Complete System In addition to modular plugs, Hirose Electric offers box type outlets, patch panels, and wall outlets. Systems built using all components from the same manufacturer will assure stable data transfer. 3. Support of a Wide Variety of Manufacturers' CAT Cable To assure high performance of the system we test and monitor data transfer using CAT cables manufactured by different suppliers. Attenuation/PSNEXT (db) Permanent Link PSACR 1 9 7 5 4 CAT PSNEXT standard value 3 1 CAT Attenuation standard value 1 1 1 1.4w 1
All non-rohs TM23 products Series CAT have been discontinued, Data or Wiring will be discontinued System soon. Connectors Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plugs, Boots Specifications Rating Current rating Voltage rating 1A 125V AC Operating temperature range -25ç to +ç (Note) Item Specification Conditions 1 M ohms min. 1 V DC 1. Insulation resistance 2. Withstanding voltage (between adjacent contacts) 3. Contact resistance 4. Vibration 5. Shock. Durability (mating/un-mating) 7. Temperature cycle No flashover or insulation breakdown. 23 m ohms max. No electrical discontinuity of 5μs min. Contact resistance : 25m ohms max. No electrical discontinuity of 5μs. min. Contact resistance : 25m ohms max. Contact resistance : 25m ohms max. Contact resistance : 25 m ohms max. Insulation resistance : 1 M ohms min. Contact resistance: 25 m ohms max.. Humidity Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 1 M ohms min. (Dry state) 9. Salt Spray Contact resistance: 25 m ohms max. Note: Includes temperature rise caused by current flow. Materials and Finishes Plugs Boots Component Insulator Contacts Strain relief clamp Component Insulator Ordering Information 5 V AC / one minute 1mA Frequency: 1 to 55 Hz, single amplitude of.75 mm, 1 octave/min. conduct, 1 cycles to each 3 directions. Acceleration of 49 m/s 2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the axes. cycles Temperature : -55±3ç +15ç to +35ç +5±2ç +15ç to +35ç +5 +5 Duration (Minutes): 3 2 to 3 3 2 to 3 5 cycles 5 hours at temperature of 4ç and humidity of 9% to 95%. 5% salt water/4 hours. Material Finish Remarks Polycarbonate Phosphor bronze Brass Color: Clear Contact area: Gold plated Nickel plated UL94V- ------------------- ------------------- Material Finish Remarks White (Standard color) UL94V- EPTR Black, red, blue, yellow, green, orange, gray, light blue ------------------- Plugs 1 Series name : TM23 TM23 - P - P 2 Connector type P : Plug 1 2 3 4 3 4 Inserted contacts Size : contacts P : contacts Boots 1 Series name : TM23 TM23 - P - BT 1 2 3 4 2 Connector type P : Plug 3 Size : contacts 4 BT : Boot Jacks 1 Series name : TM23 TM23 R - 5A 1 2 3 4 5 2 Connector type R : Jack 3 Mounting style/termination type 5A : Right-angle/through hole 4 Jack opening code : For contacts 5 Number of inserted contacts : contacts 2
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23 search at Series CAT www.hirose-connectors.com, Data Wiring or contact System your Hirose Connectors sales representative. Plugs BOverview. Contact configured for CAT performance...5 mm dia. solid wire or AWG #24 stranded wire.. Use with cables having external diameters of 5.4 mm to.mm.. Strain relief clamp protects the contact/conductor termination areas. Plug body Connector guide insert * (25).9 24 C (17.5) 1..9 11.7 (12.9) 5.4 1.5 Strain relief clamp * 4.75 Connecter guide insert (Shown inserted) Contact No. 1 Contact No. 17 1.5 5.5 TM23P-P Part No. CL No. RoHS TM23P-P 222-291- YES BMated with corresponding receptacle (Shown for reference only) (15.45) * Supplied separately(1bag contains 1pcs.) 3
All non-rohs TM23 products Series CAT have been discontinued, Data or Wiring will be discontinued System soon. Connectors Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Boots BOverview. Dedicated boots for the TM23P-P.. 9 color variations.. Halogen-free.. Protects the plug s lock/release lever. 12 13.4 25.3 (4) (12) (.5) 1. (1.9) (17.2) 1.. Ø. TM23P--BT 1 Part Number CL No. Color RoHS TM23P--BT(1) TM23P--BT(1) TM23P--BT(2) TM23P--BT(3) TM23P--BT(4) TM23P--BT(5) TM23P--BT() TM23P--BT(7) TM23P--BT() 222-2917-9-2 222-2917-9-1 222-2917-9-2 222-2917-9-3 222-2917-9-4 222-2917-9-5 222-2917-9-222-2917-9-7 222-2917-9- White Black Red Blue Yellow Green Orange Gray Light Blue YES BBoot installed (4) Protected lock/release lever Ø.MAX TM23P-P 4
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23 search at Series CAT www.hirose-connectors.com, Data Wiring or contact System your Hirose Connectors sales representative. Manual Termination Tool HRS marking side (For contact/conductor termination) A Reverse side (For cable strain relief clamp crimping) Part No. CL No. HT1-TM23/22P-P 92-212-1 * Changing the A Assembly parts to TM22 dedicated clamp parts will allow wiring of Hirose s TM22P-P plugs supporting CAT 5e. Automatic Contact Termination Machine Item Body Applicator Part Number CM-15 AP15-TM23P-P CL No. CL91-5-4 CL91-25-5 Cable Strain Relief Clamp Crimping Jig (Manual operated) Part Number CL No. TM23P-P/CK-MP(1) CL92-213-3(1) Recommended Cable Specification Jacket Filler Conductor Conductor Solid copper conductor:.5mm dia. Stranded copper conductor: AWG#24 Individual conductor insulation dia. (.95mm to 1.5mm) Insulation Overall jacket dia. (5.4mm to.mm) Note: To achieve CAT performance, refer to TM23P-P Cable Termination Procedure Manual(ETAD-E2415). 5
All non-rohs TM23 products Series CAT have been discontinued, Data or Wiring will be discontinued System soon. Connectors Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Jacks BOverview. Unique contact structure designed for crosstalk reduction.. (Through hole : 3 rows). Temporary retention to board with integral flexible posts. BPCB mounting pattern 15 13 7.112 15 5. 3.4 -Ø. 14.5 1.1 2.54 2-Ø2.4 4 1 7 5 2 4.43 Flexible post 3.35 2.1 3 1.3 15 Contact No. Contact No. 1 Connector front edge Recommended board thickness: 1.mm 2.54 4 1.3 Part Number CL No. Color RoHS TM23R-5A-(5) 222-291-1-5 Black YES Note: The jack by itself does not clear CAT performance requirements. Compensation on the board is required to secure CAT performance.
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS TM23 search at Series CAT www.hirose-connectors.com, Data Wiring or contact System your Hirose Connectors sales representative. Precautions in System Construction The TM23 Series connector and components were designed for CAT data transfer. However, it is highly recommended that the entire connected system be checked for this performance level. Cable termination procedures Cable termination procedure manual No. ETAD-E2415 Part Number TM23P-P Recommended Cable Manufacturers Hirose Electric closely examines the transfer performance of these connectors with the CAT cable that is manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in Table 1 for system construction with the TM23 Series. Table1 Recommended Cable Manufacturers Manufacturer's Name Web Site Hitachi Cable, Ltd. http://www.hitachi-cable.co.jp/index_e.html Tonichi Kyosan Cable, Ltd. http://www.tonichi-kyosan.co.jp/ NipponSeisen Co. Ltd. http://www.nscable.co.jp/ Okano Electric Wire Co., Ltd. http://www.okano-cable.co.jp/english/index.html Tsushin Kogyo K.K. http://www.tsuko.co.jp/ Showa Electric Wire & Cable Co., Ltd. http://www.swcc.co.jp/eng/index.html Fuji Electric Cable Co, Ltd. http://www.tokyo-fuji.co.jp/index_f.htm Note: Please see the web sites of the various manufacturers for cable specifications. Contact HRS for recommendations when using cables from other suppliers. Use of Different Manufacturers' Components Use of different manufacturers' components in one system could cause the deterioration of transfer performance. Check of the System Performance Verification All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system construction contractor information. 7
All non-rohs TM23 products Series CAT have been discontinued, Data or Wiring will be discontinued System soon. Connectors Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Technical Documentation CAT Transmission Characteristics Data This is representative transfer performance for the TM23 Series. A high margin is used for CAT standard values.. Permanent Links Permanent Link PSACR Main unit Horizontal cable 9 m TM23R-MPP24 TM23R-T1 Permanent link adapter (PM) Remote unit Attenuation/PSNEXT (db) 1 9 7 5 4 CAT PSNEXT standard value 3 1 CAT Attenuation standard value 1 1 1 1. Channel Links Horizontal cable 9 m Channel Link PSACR Patch cable 2 m. Patch Cable TM23R-MPP24 Main unit TM23R-T1 Stranded Patch cable wire 3 m 5 m ( :TM23P-P) Channel link adapter Remote unit Attenuation/PSNEXT (db) 1 9 7 5 CAT PSNEXT standard value 4 3 CAT Attenuation standard value 1 1 1 1 1 Patch Cable 2 m Main unit Channel link adapter Remote unit 1 Patch Cable 2 m NEXT Patch Cable 2 m RL NEXT(dB) 1 4 CAT NEXT standard value RL(dB) 5 4 3 CAT RL standard value 1 1 1 1 1 1 1 1 1 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-57,JAPAN PHONE: 1-3-3491-9741, FAX: 1-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.